The Innovation Comes from the Sea: Chitosan and Alginate Hybrid Gels and Films as Sustainable Materials for Wastewater Remediation.

The growing utilization of renewable and residual biomasses for environmental preservation and remediation are important goals to be pursued to minimize the environmental impact of human activities. In this paper, sodium alginate (derived from brown algae) was crosslinked using chitosan (mainly derived from the exoskeleton of crustaceans) in the presence of biowaste-derived substances isolated from green compost (BBS-GC), to produce hydrogels and dried films. The obtained materials were tested as adsorbents for wastewater remediation. To this purpose, gels were characterized using a multi-analytical approach and used as active substrates for the removal of three differently-charged molecules, chosen as model pollutants: crystal violet, rhodamine B, and orange II. The effectiveness of the gel formulations was demonstrated and attributed to the variety of active functionalities introduced by the different precursors, the structural factors and the peculiar physicochemical properties of the resulting materials.

Chitosan-calcium alginate dressing promotes wound healing: A preliminary study.

Dressings are necessary during the process of wound healing. Since the early 1980s, several types of wound dressings have been produced, but they cannot always take into account some effects include antibacterial effect, wound healing promotion, and other properties. In this study, we would like to develop an effective dressing with the above properties, especially accelerating wound healing effect. A chitosan-calcium alginate dressing (CCAD) was developed by coating mixture of chitosan with high-low molecular weight on calcium alginate dressing (CAD). We investigated the structural characteristics of CCAD with Fourier-transform infrared spectroscopy (FTIR) and electron microscopy. The cytotoxicity and antibacterial property were evaluated in vitro using CCK-8 and inhibition zone method. Moisture retention was tested on the skin of Sprague-Dawley (SD) rats, and wound healing studies were performed on a full-thickness skin wound model in SD rats. CCAD showed good moisturizing and antibacterial properties with no cytotoxicity. CCAD could inhibit inflammation by decreasing IL-6, and it could also promote angiogenesis by increasing VEGF, resulting in better wound healing than CAD. CCAD is a better choice in wound care due to its antibacterial property, biocompatibility, moisture retention, healing promotion, and non-cytotoxicity characteristics.

Biofunctions of antimicrobial peptide-conjugated alginate/hyaluronic acid/collagen wound dressings promote wound healing of a mixed-bacteria-infected wound.

The increase in severe infections caused by antibiotic drug resistance and the decrease in the number of new antibacterial drugs approved for use in the last few decades are driving the need for the development of new antimicrobial strategies. Antimicrobial peptides (AMPs) are a potential new class of antimicrobial drugs that are expected to solve the problem of global antibiotic drug resistance. Herein, the AMP Tet213 was immobilised onto the substrates of alginate (ALG), hyaluronic acid (HA), and collagen (COL) to form the ALG/HA/COL-AMP wound dressing. This wound dressing exhibited a high degree of swelling and the appropriate porosity, mechanical properties, and biodegradability. The Tet213-immobilised ALG/HA/COL dressings exhibited antimicrobial activity against three pathogenic bacterial strains (Gram-negative E. coli and Gram-positive MRSA and S. aureus) and facilitated the proliferation of NIH 3T3 fibroblast cells. In addition, the ALG/HA/COL-AMP antimicrobial dressings promoted wound healing, re-epithelialisation, collagen deposition, and angiogenesis. Moreover, the wound-healing effects of ALG/HA/COL-AMP surpassed the gauze and ALG/HA/COL compared to commercially available silver-based dressings (Aguacel Ag). These results suggest that the Tet213-conjugated ALG/HA/COL wound dressing, with its multiple biological activities, is a promising wound-dressing material.

High internal phase emulsion (HIPE)-templated biopolymeric oleofilms containing an ultra-high concentration of edible liquid oil.

We report, for the first time, the fabrication of oleofilms (containing more than 97 wt% edible liquid oil) using high internal phase emulsions (with oil volume fraction φoil = 0.82) as templates. Advanced microscopy studies revealed an interesting microstructure of these films where jammed oil droplets were embedded in a dried matrix of biopolymeric complexes.

Pullulan-alginate fibers produced using free surface electrospinning.

Pullulan-alginate ultrafine fibers, with and without CaCl2, were electrospun from aqueous polymer solutions using a free-surface electrospinning method, without the use of synthetic spinning aid polymer. Aqueous pullulan solution (10%, w/w) could be electrospun into beaded fibers of 110 nm in diameter with a board diameter distribution. By contrast, continuous and smooth fibers were formed when 0.8 to 1.6% (w/w) alginate was added to the 10% (w/w) pullulan solutions, producing smaller fibers ranging from 87 to 57 nm in diameter. The positive effect of alginate can be attributed to the increase in polymer chain entanglement, as well as enhanced hydrogen bonding interaction between pullulan and alginate. The addition of trace amount of CaCl2 (up to 0.045%, w/w) resulted in smooth and ultrafine fibers that were significantly smaller in diameter and greater thermal stability than those prepared without the addition of CaCl2. The production of typical electrospun fibers involves the use of undesirable organic solvents and/or non-food grade synthetic spinning aid polymer. The water-based edible biopolymer systems presented in this study can be useful for the preparation of nano-scale fibers that are more conducive for food, nutraceutical, and pharmaceutical applications.

Extending viability of Lactobacillus plantarum and Lactobacillus johnsonii by microencapsulation in alginate microgels.

AIM: To investigate whether microencapsulation of Lactobacillus in alginate microbeads will lead to increased longevity during refrigerated storage or simulated digestion. MATERIALS AND METHODS: Microscopy was used to confirm that Lactobacillus plantarum ATCC BAA-793 and Lactobacillus johnsonii ATCC 33200 were immobilised within the microbeads and laser scattering analysis was used to determine the mean diameter of the microbeads. The number of viable cells were enumerated throughout refrigerated storage and simulated digestion experiments. RESULTS: Microencapsulation was shown to have differing effects on viability depending on the species, but led to extended viability during refrigerated storage and simulated digestion in L. johnsonii and L. plantarum respectively. CONCLUSION: Fermented functional foods contain microbes beneficial to human health. However, extended shelf storage and the harsh environment of the GI tract significantly reduces the number of viable microbes reaching the consumer. Microencapsulation allows beneficial microbes to reach the gut of the consumer in higher numbers, and thus confer greater health benefits.

Developing antimicrobial calcium alginate fibres from neem and papaya leaves extract.

OBJECTIVE: The aim of this study was to evaluate an alternative approach to developing antimicrobial alginate fibres using plant extracts, such as those from neem and papaya leaves. METHOD: Aqueous leaves extract from neem, papaya and their hybrid combinations were used as solvent to develop sodium alginate fibres. Sodium alginate polymer containing these extracts was extruded in a calcium chloride (CaCl2) bath to develop neem (NE), papaya (PE) and their hybrid combinations-based calcium alginate fibres (H-1 to H-5). The surface morphology, spectra, liquid absorption, tensile strength and antimicrobial activity of these developed fibres were measured. RESULTS: NE fibre showed greater tensile strength than PE. The liquid absorption property of all developed fibres decreased, but showed antibacterial properties against Staphylococcus aureus and reduced bacterial growth up to 85% when compared with pure calcium alginate fibre. CONCLUSION: Neem, papaya and hybrid extract-based calcium alginate fibres have the potential to be used as wound dressings.

Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus.

This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

Structural characterization and formation mechanism of zein-propylene glycol alginate binary complex induced by calcium ions.

Effect of calcium ions (Ca2+) on characteristics of zein-propylene glycol alginate (PGA) binary complex was studied in this work. Ca2+ induced the formation of zein aggregates with decreased fluorescence intensity and a significant α-helix loss of zein. Zein-PGA binary complex with Ca2+ showed the decreased dimension and the minimum size was observed at 50.0mM Ca2+. Ca2+ resulted in the formation of strong hydrogen bonds between zein and PGA, strengthened their hydrophobic interactions, and induced a new peak at the diffraction angle of 30° in the pattern of Zein-PGA binary complex. PGA fortified with Ca2+ exhibited an overall plane-like structure, also an interwoven flat profile appeared in Zein-PGA binary complex with Ca2+. Three potential mechanisms were proposed to explain the morphological changes of samples after Ca2+ addition: (i) particle-particle collision and aggregation of particles; (ii) chain-chain association and further cross-linking of associated chains; (iii) simultaneous cross-linking coupled with aggregation.

Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus

ABSTRACT This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

Alginate Beads Containing Lactase: Stability and Microstructure.

ß-Galactosidase (lactase) is a widely used enzyme in the food industry; however, it has low stability against thermal and mechanical treatments. Due to this, the purpose of the present research was to analyze the encapsulation of lactase in alginate-Ca(II) beads in order to maintain its enzymatic activity toward freezing, freezing/thawing, and storage. Also, the effect of the addition of trehalose, and arabic and guar gums and their influence on the microstructure as well as on thermal properties and molecular mobility were studied. Lactase was successfully encapsulated in alginate-Ca(II) beads, and the inclusion of trehalose was critical for activity preservation toward treatments, being improved in guar gum-containing systems. The gums increased the Tm' values, which represents a valuable technological improvement. Finally, the presence of secondary excipients affected the microstructure, showing rods with smaller outer diameter and with lower compactness than alginate-Ca(II) beads. Also, bead composition greatly affects the size, shape, and relaxation times.

Washless Method Enables Multilayer Coating of an Aggregation-Prone Nanoparticulate Drug Delivery System with Enhanced Yields, Colloidal Stability, and Scalability.

Aggregation is frequently encountered during coating nanoparticles, especially when the core is not solid and the coating polyelectrolytes are weak. Here, the coating of a nanoliposome with two weak polyelectrolytes, alginate and chitosan, is investigated. First, quartz crystal microbalance with dissipation, atomic force microscopy, scanning electron microscopy, and energy dispersive spectroscopy analyses confirm the feasibility of firm adsorption of up to 16 layers of weak polyelectrolytes to the liposomal surface. Titrations are then performed to identify the lowest amounts of polyelectrolytes required to make eight saturated coating layers using the washless method. Significantly improved yields and reproducibility (almost 100%) are achieved, in addition to control over layer thickness. Attenuated total reflectance Fourier transform infrared spectroscopy studies confirm the success of layering. This is special since scientists always attempt to reduce nanoparticle aggregation by substituting the soft core, using one strong polyelectrolyte, or contending with lower yields or numbers of coating layers.

Application of hyaluronic acid/sodium alginate-based microparticles to prevent tissue adhesion in a rabbit model.

PURPOSE: Postsurgical adhesion formation is a concern in every field of surgery. We evaluated the efficacy of hyaluronic acid/sodium alginate-based microparticle anti-adhesive agents (MP) for the prevention of postsurgical adhesion formation in a standardized rabbit model. METHOD: To evaluate the anti-adhesion effect, a uterus-abdominal wall abrasion model was created in rabbits. On the surface of the injured uterus, an anti-adhesive agent, Interceed(®) or MP, was applied (positive control and study groups, respectively; n = 10 each). In another group of 10 animals, neither agent was applied (negative control group). The adhesion levels were graded 3 weeks after surgery. Acute and chronic toxicity was also evaluated. RESULTS: The grade of adhesion was significantly lower in the MP group than in the negative control and positive control groups. No evidence of acute or chronic toxicity induced by this material was found in blood and tissue analysis. CONCLUSION: MP shows potential as an effective novel type of resorbable biomaterial to reduce postoperative adhesion. The easy placement and handling of this material make the MP powder attractive as a tissue adhesion barrier.

Drug release behavior of poly (lactic-glycolic acid) grafting from sodium alginate (ALG-g-PLGA) prepared by direct polycondensation.

Hydrophobically modified sodium alginate, poly (lactic-glycolic acid) grafting from sodium alginate (ALG-g-PLGA), was successfully synthesized through direct one-step polymerization of sodium alginate, glycolic acid, and lactic acid. ALG-g-PLGA self-assembled to colloidal nanoparticles and subsequently hydrogel microspheres were obtained by crosslinking ALG-g-PLGA nanoparticles in the solution of calcium chloride. The modified hydrogel microspheres could be used as the drug delivery vehicles for a hydrophobic ibuprofen. Compared with sodium alginate, ALG-g-PLGA demonstrated an improved drug loading rate, encapsulation efficiency, and prolonged release speed. The products, as novel and highly promising biomaterials, have potential applications.

Alginate nanofibrous mats with adjustable degradation rate for regenerative medicine.

The broad utilization of electrospun scaffolds of sodium alginate in tissue engineering is strongly limited by their high solubility in aqueous environments and by the difficulty to adjust their degradation dynamics. Here, an alternative strategy to enhance the stability and to control the degradability of alginate nanofibers is described by treating them with trifluoroacetic acid for specific time intervals. It is demonstrated that, by increasing the duration of the acid treatment procedure, a lower degradation rate of the resulting fibers in buffer solutions can be achieved. Furthermore, the produced mats are free from cytotoxic compounds and are highly biocompatible. The properties conferred to the alginate nanofibrous mats by the proposed method are extremely attractive in the production of innovative biomedical devices.

Characterization of morphology and composition of inorganic fillers in dental alginates.

Energy dispersive X-ray spectroscopy microanalysis (EDX), scanning electron microscopy (SEM), and Archimedes' Principle were used to determine the characteristics of inorganic filler particles in five dental alginates, including Cavex ColorChange (C), Hydrogum 5 (H5), Hydrogum (H), Orthoprint (O), and Jeltrate Plus (JP). The different alginate powders (0.5 mg) were fixed on plastic stubs (n = 5) and sputter coated with carbon for EDX analysis, then coated with gold, and observed using SEM. Volume fractions were determined by weighing a sample of each material in water before and after calcining at 450(°)C for 3 h. The alginate materials were mainly composed of silicon (Si) by weight (C-81.59%, H-79.89%, O-78.87%, H5-77.95%, JP-66.88%, wt). The filler fractions in volume (vt) were as follows: H5-84.85%, JP-74.76%, H-70.03%, O-68.31%, and C-56.10%. The tested materials demonstrated important differences in the inorganic elemental composition, filler fraction, and particle morphology.

Design and characterization of core-shell mPEG-PLGA composite microparticles for development of cell-scaffold constructs.

Appropriate scaffolds capable of providing suitable biological and structural guidance are of great importance to generate cell-scaffold constructs for cell-based tissue engineering. The aim of the present study was to develop composite microparticles with a structure to provide functionality as a combined drug delivery/scaffold system. Composite microparticles were produced by incorporating either alginate/dermatan sulfate (Alg/DS) or alginate/chitosan/dermatan sulfate (Alg/CS/DS) particles in mPEG-PLGA microparticles using coaxial ultrasonic atomization. The encapsulation and distribution of Alg/DS or Alg/CS/DS particles in the mPEG-PLGA microparticles were significantly dependent on the operating conditions, including the flow rate ratio (Qout/Qin) and the viscosity of the polymer solutions (Vout, Vin) between the outer and the inner feeding channels. The core-shell composite microparticles containing the Alg/DS particles or the Alg/CS/DS particles displayed 40% and 65% DS release in 10 days, respectively, as compared to the DS directly loaded microparticles showing 90% DS release during the same time interval. The release profiles of DS correlate with the cell proliferation of fibroblasts, i.e. more sustainable cell growth was induced by the DS released from the core-shell composite microparticles comprising Alg/CS/DS particles. After seeding fibroblasts onto the composite microparticles, excellent cell adhesion was observed, and a successful assembly of the cell-scaffold constructs was induced within 7 days. Therefore, the present study demonstrates a novel strategy for fabrication of core-shell composite microparticles comprising additional particulate drug carriers in the core, which provides controlled delivery of DS and favorable cell biocompatibility; an approach to potentially achieve cell-based tissue regeneration.

Novel microparticulate systems for the vaginal delivery of nystatin: development and characterization.

To develop more effective antifungal microparticulate therapeutic systems for the treatment of Candida vaginitis, microparticles containing nystatin were elaborated by emulsification/internal gelation method. Three types of microparticles were successfully prepared, alginate microparticles, chitosan and poloxamer 407 coated alginate microparticles. DSC and FT-IR studies were performed to test the efficacy of the method. After physicochemical characterization, mean particle sizes ranged from 36.088 µm to 56.146 µm. The encapsulation efficiency was found to be similar for alginate and chitosan coated microparticles and lower for poloxamer 407 coated. Optimal mucoadhesive properties in all kind of microparticles where exhibited. Release studies showed the best kinetic parameters for poloxamer 407 coated microparticles. After ex vivo permeation studies through porcine vaginal mucosa, and determination of the amount of nystatin retained as well as microbiologic studies performed, it could be inferred that the developed microparticulate systems offered an antifungal effect against Candida albicans without toxic systemic absorption.

Microencapsulation of conjugated linolenic acid-rich pomegranate seed oil by an emulsion method.

Controlled release of food ingredients and their protection from oxidation are the key functionality provided by microencapsulation. In the present study, pomegranate seed oil, rich in conjugated linolenic acid, was microencapsulated. As encapsulating agent, sodium alginate or trehalose was used. Calcium caseinate was used as the emulsifier. Performances of the two encapsulants were compared in respect of the rate of release of core material from the microcapsules and stability of microcapsules against harsh conditions. Microencapsulation was carried out by preparation of an emulsion containing calcium caseinate as the emulsion stabilizer and a water-soluble carbohydrate (either sodium alginate or trehalose) as the encapsulant. An oil-in-water emulsion was prepared with pomegranate seed oil as the inner core material. The emulsion was thereby freeze-dried and the dried product pulverized. External morphology of the microcapsules was studied under scanning electron microscope. Micrographs showed that both types of microcapsules had uneven surface morphology. Release rate of the microcapsules was studied using UV-spectrophotometer. Trehalose-based microcapsules showed higher release rate. On subjecting the microcapsules at 110 °C for specific time periods, it was observed that sodium alginate microcapsules retained their original properties. Hence, we can say that sodium alginate microcapsules are more heat resistant than trehalose microcapsules.

Effect of incorporating prebiotics in coating materials for the microencapsulation of Saccharomyces boulardii.

The objective of this study was to microencapsulate Saccharomyces boulardii using the emulsion technique. To microencapsulate the yeast, alginate sodium blended with inulin and mucilage from Opuntiaficus-indica was used as a coating material. The textural properties of the gels formed by the encapsulating materials and the in vitro viability of the yeast strain in the simulated conditions were studied. Textural profile analyses of the gels revealed differences (p < 0.05) in hardness because alginate produced stronger gels, whereas the incorporation of other hydrocolloids with alginate decreased gel strength and resulted in a more uniform, cohesive gel matrix. When alginate was blended with mucilage and inulin, encapsulated yeast presented higher counts and more viable cells, as compared to free yeast following 30 days of storage at 4 °C. Encapsulated and free yeast had 76.1% and 63.3%, respectively, of cell viability after 35 days of storage.