Effect of fence tray matching care on excess adhesive and bracket placement accuracy for orthodontic bonding: an in vitro study.

OBJECTIVE: This study aimed to evaluate the effect of fence tray matching care (FTMC) in bracket bonding by measuring excess adhesive, as well as linear and angular deviations, and by comparing it with the half-wrapped tray (HWT). MATERIALS AND METHODS: An intraoral scanner was used to acquire data on the maxillary dental arch of a patient with periodontitis.Furthermore, 20 maxillary dental arch models were 3D printed. Using 3Shape, PlastyCAD software, and 3D printing technology, 10 FTMC (method I) and HWT (method II) were obtained. By preoperative preparation, intraoperative coordination, and postoperative measurement, the brackets were transferred from the trays to the 3D-printed maxillary dental arch models. Additionally, the bracket's excess adhesive as well as linear and angular deviations were measured, and the differences between the two methods were analyzed. RESULTS: Excess adhesive was observed in both methods, with FTMC showing less adhesive (P< 0.001), with a statistical difference. Furthermore, HWT's vertical, tip and torque, which was significantly greater than FTMC (P< 0.05), with no statistical difference among other respects. The study data of incisors, canines, and premolars, showed that the premolars had more adhesive residue and were more likely to have linear and angular deviations. CONCLUSIONS: The FTMC had higher bracket bonding effect in comparison to HWT, and the adhesive residue, linear and angular deviations are smaller. The fence tray offers an intuitive view of the precise bonding of the bracket, and can remove excess adhesive to prevent white spot lesions via care, providing a different bonding method for clinical applications.

[Radiological assessment of long-term outcomes of restorative treatment in patients with shortened dental arches]. / Rentgenologicheskaya otsenka otdalennykh rezul'tatov ortopedicheskogo lecheniya patsientov s ukorochennym zubnym ryadom.

BACKGROUND: Restoring the integrity of the dentition with orthopedic structures should be carried out strictly according to indications, taking into account the condition of the supporting teeth and/or teeth limiting the defect. OBJECTIVE: To conduct a retrospective analysis of the results of orthopedic treatment of patients with shortened dentition according to clinical and radiological methods. MATERIALS AND METHODS: The material for the study was data from cone beam computed tomography (CBCT) of 126 patients with shortened dentition (most patients with the absence of a second molar, as well as the absence of the first and second molars), who sought a consultation about missing teeth in the orthopedic and surgical department of the Federal State Budgetary Institution National Medical Research Center TsNIISiCHLKh Ministry of Health of Russia. RESULTS: At the stages of treatment for patients in the study group, insufficient attention is paid to the restoration of terminal defects of the dentition in the upper and lower jaws, especially the restoration of second molars. This may be due to improper planning of dental treatment and insufficient motivation of the patient to carry out comprehensive dental rehabilitation. According to CT studies, the number of complications of orthopedic treatment in the area of supporting teeth and/or teeth limiting the included defect or terminal defect of the dentition in the masticatory region increases depending on the period of use of the orthopedic structure. CONCLUSIONS: The use of cantilever structures leads to functional overload of the supporting teeth. Neglecting the restoration of a full dentition and prosthetics of end defects of the dentition leads to dentoalveolar advancement of antagonists of missing teeth and the appearance of complications such as functional overload of supporting teeth and resorption of alveolar bone.

[The use of fixed expanders with orthodontic miniscrews support in children with mesial occlusion]. / Ispol'zovanie nes"emnykh rasshiritelei s vnutrikostnoi oporoi u detei s mezial'noi okklyuziei.

OBJECTIVE: Prevention of the development of pronounced skeletal abnormalities in patients with mesial occlusion. MATERIALS AND METHODS: Biometric analysis of control and diagnostic models of dentition was performed in 60 patients with dental anomalies before and after treatment in 3 mutually perpendicular planes to identify violations in the formation of dental arches by sagittal and transversal dimensions, and alveolar processes - by vertical dimensions (methods of A. Pont, G. Korkhaus). Measurements of 23 parameters of TRG and sections of CBCT were carried out using the modified Nad-Ars technique with analysis of skeletal parameters before and after treatment. Treatment was carried out using dilators for the upper jaw in combination with a facial mask and further dynamic observation using active retention devices. RESULTS: The results of treatment showed an increase in the length of the anterior segment of the upper dental arch by 2.8±0.55 mm (p<0.05 mm); expansion in the area of temporary molars by 2.85±0.65 mm (p<0.05); in the area of permanent molars by 2.75±0.55 mm (p<0.05); in the area of the apical basis of HF by 3.82±0.45 mm (p<0.05). The length of the lower dental arch in the anterior segment has not changed. Analysis of TRG parameters showed a significant increase in the values of

Evaluation of maxillary arch symmetry in cleft patients undergoing orthodontic treatment: a comparative study.

OBJECTIVE: Patients with a cleft require structured procedures to achieve feasible treatment results. Since many treatment protocols coexist without being superior to one another, this study investigated the Saarland University Hospital treatment concept for patients with unilateral and bilateral clefts to evaluate its effects upon dental arch dimensions until the early mixed dentition. MATERIAL AND METHODS: Digitized plaster models were used for data collection. Records of 83 patients (Cleft n = 41 [UCLP n = 28, BCLP n = 13], Non-Cleft Control n = 42) comprised 249 casts. The evaluation included established procedures for measurements of edentulous and dentate jaws. Statistics included Shapiro-Wilk, Friedmann, Wilcoxon and Mann-Whitney-U-Tests for the casts. The level of significance was set at p < 0.05. RESULTS: The cast analysis showed an approximation of arch dimensions towards those of age-matched patients without a cleft until early mixed dentition. The mean values of patients with and without cleft lip and palate were almost indistinguishable when compared in primary and/or early mixed dentition. CONCLUSIONS: The evaluated treatment concept leads to feasible outcomes regarding dental arches in patients with unilateral and bilateral clefts compared to an age-matched non-cleft control. CLINICAL RELEVANCE: The evaluated treatment concept leads to favorable outcomes until early mixed dentition.

PREVALENCE OF DENTITION, DENTAL ARCHES AND DENTAL ANOMALIES.

Malocclusion can have a negative impact on children's quality of life. Patients with severe malocclusions tend to smile less and look for ways to improve their smile. The mentioned study was conducted in 400 patients aged 3 to 18 years, who applied to the dental clinic for orthodontic treatment regardless of age and gender. The aim of the study was the prevalence of occlusion, dental arches and dental anomalies, most often combined occlusion anomalies, functional disorders, carious and filled teeth and periodontal diseases in the examined patients. According to the results of the research, it was established that the majority of the examined patients were female. Among occlusion anomalies, occlusion class II subclass I was detected with the highest frequency. Almost 11% of the examined had a functional disturbances oral and maxillofacial system. 6% of the examined have an anomaly of the shape of the crown of the teeth. 6.25% of cases have microdontia and 5.5% have macrodontia. 1.17% showed pathological wear and 24.55 enamel hypoplasia. 1% supernumerary tooth, of which 0.75% supernumerary tooth between central incisors, 0.25% supernumerary tooth in other area. Persistent tooth in 3.25% of cases. 5% of retentive teeth are one or several teeth at the same time. 26.75% have one or more dystopian postures. Diastema was detected in 19.75%. Most of the examined patients were female, which is explained by the perception of patients and their parents regarding facial aesthetics in relation to gender. Most of the patients turn to orthodontics in cases of occlusal anomalies that are more aesthetically pronounced and easily perceived by others. In the studied society, oral health and oral care skills are given less importance, as evidenced by high rates of periodontal diseases, caries, and filled teeth. In the mentioned population, it is very important to raise the level of knowledge of the importance of oral health, which is possible by conducting educational events in kindergartens, schools, public gathering places, dental clinics.

Gingival thickness and gingival width in children: a cross-sectional study utilizing ultrasonography.

PURPOSE: To measure the gingival phenotype-related features, gingival thickness (GT) and gingival width (GW), in healthy children and to investigate their association between them, with age, gender, tooth-type and arch. METHODS: The gingival sites of 1029 teeth were included from 64 children (36 males and 28 females), with primary and mixed dentition, attending the paediatric dental clinic of Aristotle University, Thessaloniki. GT and GW were measured ultrasonically and with a periodontal probe, respectively. Mixed effects linear regression models were used to evaluate the association of gingival thickness and gingival width with the under-investigation parameters. Spearman's correlation coefficient was used to evaluate correlation between GT and GW. RESULTS: Significantly thicker gingiva is found in posterior teeth compared to anterior teeth, in permanent teeth versus primary teeth and in maxillary teeth in comparison to mandibular teeth (p value < 0.001). Regarding GW, significantly wider gingiva is noted in posterior regions (p value = 0.022) and the maxilla (p value < 0.001). Gender-wise and concerning age GT and GW are not significantly affected. A weak and positive correlation between GT and GW is noted (rho 0.30, p < 0.001). CONCLUSIONS: GT and GW present significant associations with arch and tooth-type. Findings from this study fulfil the further understanding of GT and GW of paediatric patients that are investigated sparsely throughout the literature and demonstrate an accurate, painless and simple method to map the gingiva.

Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

Evaluation and comparison of the accuracy of three intraoral scanners for replicating a complete denture.

STATEMENT OF PROBLEM: Technological advances in digital acquisition tools have increased the scope of intraoral scanners (IOSs), including scanning a removable complete denture (RCD) to replicate it. However, studies assessing the accuracy of IOSs for replicating a maxillary or mandibular RCD are lacking. PURPOSE: The purpose of this in vitro study was to evaluate the accuracy (trueness and precision) of 3 IOSs while replicating a maxillary and mandibular RCD. MATERIAL AND METHODS: One maxillary and 1 mandibular RCD were scanned with a desktop scanner (D2000) to obtain the reference model. Two operators scanned each RCD 5 times with 3 different IOSs (TRIOS 4, Primescan, and IS3800), following a predefined acquisition protocol. The 60 study models obtained were compared with the reference model using the Geomagic software program. For each comparison, the mean and standard deviation of discrepancy were calculated. Distances were measured on both the reference and the study model, and differences were calculated to assess whether sagittal or transverse deformations were present. The tolerance percentage of the volume of the digital model compared with the volume of the reference model was determined (difference tolerance was set at 0.1 mm). A univariate analysis of variance followed by a post hoc analysis using the Student-Newman-Keuls (α=.05) test was performed to determine the truest and the most precise IOS. RESULTS: The TRIOS 4 and Primescan IOSs had comparable trueness, with mean dimensional variations of 47 ±27 µm and 57 ±8 µm respectively compared with the reference model. The IS3800 had a lower trueness (98 ±35 µm). Primescan was significantly more precise with a mean standard deviation of 64 ±15 µm (P<.05). The TRIOS 4 (141 ±48 µm) and IS3800 (129 ±24 µm) had comparable precision. Primescan showed the least sagittal and transverse deformation. CONCLUSIONS: This study determined that an RCD can be replicated using an IOS, although all IOSs did not have equal accuracy. An in vivo study needs to assess whether this procedure is clinically acceptable.

A half jaw panoramic stitching method of intraoral endoscopy images based on dental arch arrangement.

To address the challenges of repetitive and low-texture features in intraoral endoscopic images, a novel methodology for stitching panoramic half jaw images of the oral cavity is proposed. Initially, an enhanced self-attention mechanism guided by Time-Weighting concepts is employed to augment the clustering potential of feature points, thereby increasing the number of matched features. Subsequently, a combination of the Sinkhorn algorithm and Random Sample Consensus (RANSAC) is utilized to maximize the count of matched feature pairs, accurately remove outliers and minimize error. Last, to address the unique spatial alignment among intraoral endoscopic images, a wavelet transform and weighted fusion algorithm based on dental arch arrangement in intraoral endoscopic images have been developed, specifically for use in the fusion stage of intraoral endoscopic images. This enables the local oral images to be precisely positioned along the dental arch, and seamless stitching is achieved through wavelet transformation and a gradual weighted fusion technique. Experimental results demonstrate that this method yields promising outcomes in panoramic stitching tasks for intraoral endoscopic images, achieving a matching accuracy of 84.6% and a recall rate of 78.4% in a dataset with an average overlap of 35%. A novel solution for panoramic stitching of intraoral endoscopic images is provided by this method.

Prevalence and Association between Primary Stability and Bone Quality in Implants Placed in Edentulous Dental Arches: A Retrospective Analysis.

Immediate function has become an accepted treatment modality for fixed restorations in completely edentulous jaws. The dental implants have gained immense popularity. A secure implant primary stability is positively associated with a successful implant integration and long term successful clinical outcome. The main aim of this study was to find the association between primary stability and bone density in implants placed in maxilla and mandible. A total of 1263 patients who had undergone implant placement from March 2020-March 2021 in Saveetha Dental College and Hospitals, Chennai, India were chosen for the study. The primary stability and bone density of these patients were collected from the hospital records. The collected data was compiled, reviewed, tabulated in Microsoft Excel sheet and entered in SPSS software for statistical analysis. In the present study, the patient aged between 28 and 37 years had undergone more implant placement (31%) with male predilection (53%). The most commonly associated primary stability was found to be 30-40 Ncm (51.37%) predominantly with D2 type of bone density (52.69%). A Chi-squared statistical test was done for primary stability and bone density and the P was found to be 0.00 (Chi-squared P < 0.05, statistically significant). The most predominant bone density was D2 associated with primary stability of 30-40 Ncm. The association between bone density and primary stability was found to be statistically significant. The present study shows a strong relationship between bone density and primary implant stability.

Skeletal and dental effects of function-generating bite appliance compared to rapid palatal expander and untreated controls.

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

Reliability of mixed dentition space analysis using a digital model obtained from an optical impression: a preliminary study.

OBJECTIVE: While mixed dentition space analysis is a common practice in pediatric dentistry, digital models created using an intraoral scanner are not as widely used in clinical settings. This preliminary study used a very small sample size with one reference model and aimed to (1) compare the accuracy of mixed dentition space analysis using a digital model obtained from an optical impression with that of conventional plaster model-based analysis and (2) assess inter-examiner differences. RESULTS: The space required for the mandibular permanent canine and premolars and arch length discrepancy were calculated using each model. The largest significant difference between plaster- and digital model-based analyses was identified when the right arch length discrepancy was considered (-0.49 mm; 95% confidence interval: -0.95-0.03); however, the value was considered clinically insignificant. Significant inter-examiner differences were observed for six items of the plaster model; however, no such differences were observed when using the digital model. In conclusion, digital model space analysis may have the same level of accuracy as conventional plaster model analysis and likely results in smaller inter-examiner differences than plaster model analysis.

Depth of reading within the gingival sulcus of seven intraoral scanners: an in vitro study.

AIM: The present in vitro study aimed to evaluate the depth of reading of intraoral scanners (IOSs) within the gingival sulcus. MATERIALS AND METHODS: A knife-edge preparation for a full crown was performed on a Frasaco model. The gingival sulcus of the scanned model was modified using a dedicated software program (Model Creator, exocad DentalCAD 2.4 Plovdiv) by setting the apical width (AW), coronal width (CW), and gingival sulcus depth (D). Two dental models with different gingival sulcus depths (1 or 2 mm) were printed using the digital light processing (DLP) technique. Each model was scanned 10 times. Seven different IOSs were used: Emerald, Trios 3, Carestream 3600, Dental Wings DWIO, CondorScan, True Definition Scanner (TDS), and Cerec Omnicam. Measurements of D values were performed using 3Shape 3D viewer software. The normality of the data distribution was evaluated using the Shapiro-Wilk test (P < 0.05). The nonparametric Levene's test was used to check for homoscedasticity. The data were statistically analyzed using the Kruskal-Wallis test (α = 0.05) and the Nemenyi test. RESULTS: All IOSs were able to read within the 1-mm-deep gingival sulcus, albeit with some statistically significant differences (P < 0.001). TDS and Trios 3 were able to read within the 2-mm-deep gingival sulcus (P < 0.001). CONCLUSIONS: The depth of reading of different IOSs can vary significantly. In the model with a 2-mm gingival sulcus, even in the absence of oral fluids, the depth of reading was incomplete, suggesting that deep preparations into the gingival sulcus are difficult to detect with IOSs.

Effect of different span lengths with different total occlusal convergences on the accuracy of intraoral scanners.

PURPOSE: The aim was to assess the effect of span lengths and total occlusal convergence (TOC) on the accuracy of intraoral scanners . MATERIALS AND METHODS: Two typodont acrylic teeth models were prepared to receive fixed dental prostheses with three different span lengths. Span 1: between maxillary canines; span 2: between maxillary second premolars; and span 3: between maxillary second molars. In the first model, prepared teeth had a TOC of 12°, whereas, in the second model, teeth had a TOC of 20°. Each model was scanned 10 times using 4 different intraoral scanners (Omnicam, Primescan, Trios 4, and Medit i500). The STL files from the scans were compared to the reference models (trueness) and within each test group (precision) using a 3D comparison software. Data were then statistically analyzed. RESULTS: Regarding trueness, no significant differences were found among Primescan (32.58 ± 13.08), Trios 4 (32.33 ± 12.19), and Medit i500 (32.26 ± 9.57). However, all showed significantly better trueness than Omnicam (35.70 ± 8.35) (p < 0.001). The highest values were found in scans between the second molars (47.42 ± 3.94), followed by scans between second premolars (28.42 ± 3.78), and the highest trueness was found in scans between the canines (23.80 ± 3.85). For TOC, 12° had a significantly higher value than 20° (p < 0.001). Regarding precision, the highest values were found with Omnicam (29.84 ± 3.89), followed by Medit i500 (28.04 ± 2.94), then Trios 4 (25.64 ± 3.11), and Primescan (24.69 ± 5.25). The highest values and least precision were found in scans between the second molars (28.97 ± 5.27) and scans between second premolars (27.59 ± 3.97), whereas the highest precision was found in scans between the canines (24.60 ± 2.04). For TOC, 12° had significantly higher values than 20° (p < 0.001). CONCLUSIONS: Intraoral scans are directly affected by scanner type, TOC, and scan spans. All tested scanners showed clinically acceptable results even for long-span restorations.

Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

Effect of tooth color on the accuracy of intraoral complete arch scanning under different light conditions using a zirconia restoration model.

STATEMENT OF PROBLEM: Information regarding the effect of tooth color under different light conditions on the accuracy of intraoral complete arch scanning is limited. PURPOSE: The purpose of this in vitro study was to evaluate the effect of color and ambient light conditions on the accuracy of mandibular complete arch scanning with an intraoral scanner (IOS) using a zirconia restoration model with different shades. MATERIAL AND METHODS: Five mandible dentition models with zirconia restorations of different shades were fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM). The spectral reflectance and transmittance curves were collected with a spectrophotometer to determine color parameters (Rb, T, S+A, L*, a*, b*, C*, and h). Under 4 different lighting conditions: no light (ZL), natural light (NL), room light (RL), and chair light (CL), each model was scanned 10 times by using an IOS (TRIOS 3). Three-dimensional (3D) deviation analysis and a linear deviation analysis were performed for an accurate quantitative measurement of intraoral scanning. The multivariate test was used to determine significant differences in 3D deviation and linear deviation among groups. The multiple linear regression test was conducted to investigate the relevant independent factors of mean absolute 3D deviation. RESULTS: The 3D deviation analysis showed that the mean absolute 3D deviation of 3M2 model scanning was the lowest (P<.001). Moreover, under CL and RL, the accuracy results from the 3M2 model scan were demonstrated as significantly better than the tested scans under other light conditions (P=.021). The result of the linear deviation analysis indicated that the variation in distance was only significant between the bilateral canines (P=.032). Ambient light conditions, C*, and h were factors influencing mean absolute 3D deviation (R2=0.593, P<.001). CONCLUSIONS: Color change influenced the accuracy of intraoral mandibular complete arch scanning under different light conditions. This effect may be attributable to the interaction between the ambient light condition and color parameters such as C* and h.

Influence of second premolar extractions on the volume of the oral cavity proper: a control comparative cone-beam computed tomography volumetric analysis study.

OBJECTIVES: To compare the pre- and postorthodontic treatment volumetric changes of the oral cavity proper (OCP) in extraction and nonextraction patients and to identify influencing variables. MATERIALS AND METHODS: Pre- and posttreatment cone-beam computed tomography (CBCT) scans of patients undergoing orthodontic treatment with fixed labial appliances and who satisfied the inclusion criteria were individually landmarked. Linear, angular, and volumetric measurements were determined. Descriptive statistics, repeated measure analyses of variance, correlations, and stepwise regression statistical analyses were applied. RESULTS: The CBCT scans of 54 patients who underwent the extraction of second premolars and/or extraction of second primary molars associated with agenic second premolars, and 59 nonextraction patients matched for crowding, were assessed. The mean age for both groups was 15 years. There was a statistically significant increase in the volume of the OCP for both the extraction and nonextraction groups, with the nonextraction group demonstrating a larger increase in the volume of the OCP. Gender, age, changes in mandibular and maxillary arch length, and changes in mandibular and maxillary intermolar width all influenced the change in the OCP volume. CONCLUSIONS: The volume of the OCP increased in growing patients with and without the extraction of the second premolars and/or extraction of second primary molars associated with agenic second premolars. Patients who did not have extractions as part of their orthodontic treatment demonstrated a greater overall increase in OCP volume.

Clear aligner treatment assisted by mini screw for an adult with Class II division 2 malocclusion and a right upper canine completely outside of the dental arch: A case report.

This case report describes a 19-year-old man presented with a 5.7-mm deep overbite, Class II division 2 malocclusion with the right upper maxillary canine completely buccal ectopia, deviated midline in the upper arch, severe crowding and retroclination of the maxillary and mandibular incisors. The patient was treated with clear aligners to correct the Class II relationship and the deep overbite. A series of clear aligners were used to move bilateral maxillary molars distally with unilateral mini-screw anchorage. The final results showed that clear aligners with mini-screws could effectively achieve the required upper distal molar movement thanks to a reasonable design of the stages and anchorage. The treatment was completed in 19 months and the patient was satisfied with the treatment outcome in this context of mild to moderate Class II division 2 malocclusion.

Comparison of maxillary transversal changes between auxiliary beta-titanium expansion arch and miniscrew-assisted rapid palatal expansion.

OBJECTIVE(S): This study compared buccal bone thickness, dental inclinations and maxillary transverse width dimensions changes between auxiliary beta-titanium expansion arch (AEA) and miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: The sample consisted of 29 patients, aged between 18 and 40 years, with transverse maxillary deficiency and treated without extractions, divided into two groups: group AEA: comprised 13 individuals (initial mean age: 29.23 ± 9.13 years) treated using auxiliary beta-titanium expansion arch; group MARPE: comprised 16 patients (initial mean age: 24.92 ± 7.60 years) treated with miniscrew-assisted rapid palatal expansion. Buccal bone thickness, dental inclinations and transverse width dimensions (dental, nasal base and jugular) were measured in cone-bean computed tomographies at pre- and post-treatment stages. The variables were compared using the independent t-test. RESULTS: The buccal bone thickness was similar for both groups at the post-treatment stage. The second premolars were significantly more buccal inclined in the AEA group and the right maxillary first molars in the MARPE group. The intercanine and intermolar distances were statistically significantly greater in the MARPE group. Changes in dental arch transverse dimensions were significantly greater for the MARPE group. CONCLUSION: Both treatment protocols corrected the maxillary transverse discrepancy; however, MARPE provided greater correction.

The accuracy of intra-oral scanners in full arch implant rehabilitation: a narrative review.

This narrative review aims to study the accuracy of different intra-oral scanner (IOS) devices already available on the market. The accuracy emerged during in vitro, in vivo and ex vivo studies made with IOS devices during the scan of a full arch implant rehabilitation that have been analysed to evaluate which device may be the most suitable in this clinical situation. The literature review was performed by searching topics and keywords using the PubMed and Medline databases, for example, 'digital workflow', 'full arch', 'full arch implant rehabilitation' and 'accuracy of IOS'. Inclusion and exclusion criteria for studies were: correct IMRAD (introduction, methods, results and discussion) structure; article with clear and detailed objectives; consistency of the articles with the purpose of the review; two-year range from the year of publication of the article; reproducible materials and methods; and correct follow-up. Most of the intra-oral scanners employed in vitro provided acceptable accuracy (below a threshold of 150 µm). The main parameters identified for their influence on precision were interim plant distance, body scan design, scanning pattern and operator experience. Even though literature is limited, significant differences emerged between the different models of intra-oral scanners evaluated in the studies considered within this review.