Three-Dimensional Printed Total Talus Replacement with a Concurrent Total Ankle Arthroplasty as a Personalized Approach for Advanced Ankle Osteoarthritis A Case Repor.

Ankle arthritis is becoming more common and can be pain-ful and debilitating. As the disease progresses, degenera-tive cystic changes may be found in the distal fibula, distal tibia, and talus. After failure of non-operative modalities, arthrodesis is often considered the surgical intervention of choice, but this leaves the patient with reduced range of motion, altered gait, and can negatively impact adjacent joints of the foot. Total ankle arthroplasty has been found to be an effective surgical option for ankle arthritis but is contraindicated in patients with talar collapse. When this is the case, a more personalized approach for preserving ankle motion is necessary. We present the case of a 65-year-old male with severe right ankle arthritis and talar collapse treated with a custom three-dimensionally printed talus and concurrent total ankle replacement with 2-year follow-up.

A numerical investigation for the development of functionally graded Ti/HA tibial implant for total ankle replacement: Influence of material gradation law and volume fraction index.

Stress shielding is one of the major concerns for total ankle replacement implants nowadays, because it is responsible for implant-induced bone resorption. The bone resorption contributes to the aseptic loosening and failure of ankle implants in later stages. To reduce the stress shielding, improvements can be made in the implant material by decreasing the elastic mismatch between the implant and the tibia bone. This study proposes a new functionally graded material (FGM) based tibial implant for minimizing the problem of stress shielding. Three-dimensional finite element (FE) models of the intact tibia and the implanted tibiae were created to study the influence of material gradation law and volume fraction index on stress shielding and implant-bone micromotion. Different implant materials were considered that is, cobalt-chromium, titanium (Ti), and FGM with Ti at the bottom and hydroxyapatite (HA) at the top. The FE models of FGM implants were generated by using different volume fractions and the rule of mixtures. The rule of mixtures was used to calculate the FGM properties based on the local volume fraction. The volume fraction was defined by using exponential, power, and sigmoid laws. For the power and sigmoid law varying volume fraction indices (0.1, 0.2, 0.5, 1, 2, and 5) were considered. The geometry resembling STAR® ankle system tibial implant was considered for the present study. The results indicate that FGMs lower stress shielding but also marginally increase implant-bone micromotion; however, the values were within the acceptable limit for bone ingrowth. It is observed that the material gradation law and volume fraction index influence the performance of FGM tibial implants. The tibial implant composed of FGM using power law with a volume fraction index of 0.1 was the preferred option because it showed the least stress shielding.

Assessment of bone ingrowth around beaded coated tibial implant for total ankle replacement using mechanoregulatory algorithm.

The long-term performance of porous coated tibial implants for total ankle replacement (TAR) primarily depends on the extent of bone ingrowth at the bone-implant interface. Although attempts were made for primary fixation for immediate post-operative stability, no investigation was conducted on secondary fixation. The aim of this study is to assess bone ingrowth around the porous beaded coated tibial implant for TAR using a mechanoregulatory algorithm. A realistic macroscale finite element (FE) model of the implanted tibia was developed based on computer tomography (CT) data to assess implant-bone micromotions and coupled with microscale FE models of the implant-bone interface to predict bone ingrowth around tibial implant for TAR. The macroscale FE model was subjected to three near physiological loading conditions to evaluate the site-specific implant-bone micromotion, which were then incorporated into the corresponding microscale model to mimic the near physiological loading conditions. Results of the study demonstrated that the implant experienced tangential micromotion ranged from 0 to 71 µm with a mean of 3.871 µm. Tissue differentiation results revealed that bone ingrowth across the implant ranged from 44 to 96 %, with a mean of around 70 %. The average Young's modulus of the inter-bead tissue layer varied from 1444 to 4180 MPa around the different regions of the implant. The analysis postulates that when peak micromotion touches 30 µm around different regions of the implant, it leads to pronounced fibrous tissues on the implant surface. The highest amount of bone ingrowth was observed in the central regions, and poor bone ingrowth was seen in the anterior parts of the implant, which indicate improper osseointegration around this region. This macro-micro mechanical FE framework can be extended to improve the implant design to enhance the bone ingrowth and in future to develop porous lattice-structured implants to predict and enhance osseointegration around the implant.

Total ankle replacement versus ankle fusion for end-stage ankle arthritis: A meta-analysis.

PURPOSE: This study aims to systematically review the efficacy and safety of total ankle replacement (TAR) and ankle fusion (AF) as treatment options for end-stage ankle arthritis. METHODS: A comprehensive literature search was conducted on data from multiple databases, including PubMed, The Cochrane Library, Construction and Building Materials, Embase, Web of Science, and Scopus for RCTs and prospective cohort studies comparing TAR and AF in patients with end-stage ankle arthritis from inception up to June, 2023. Our primary outcomes of interest included patients' clinical function scores and complications. We employed Review Manager 5.4 and Stata/MP 14.0 software for the meta-analysis. RESULTS: Our analysis incorporated 13 comparative studies, including 11 prospective studies, one pilot RCT, and one RCT. The pooled results revealed no significant difference in postoperative Short Form-36 scores between the TAR and AF groups (MD = -1.19, 95% CI: -3.89 to 1.50, p = .39). However, the postoperative Foot and Ankle Ability Measure scores in the AF group were significantly higher than in the TAR group (MD = 8.30, 95% CI: 1.01-15.60, p = .03). There was no significant difference in postoperative complication rates between the TAR and AF groups (RR = 0.95, 95% CI: 0.59 to 1.54, p = .85). CONCLUSION: Currently available evidence suggests no significant disparity in postoperative outcomes between TAR and AF. In the short term, TAR demonstrates better clinical scores than AF and lower complication rates. Conversely, in the long term, AF exhibits superior clinical scores and lower complication rates, although this difference is not statistically significant.

Bone grafting for periprosthetic bone cysts following total ankle arthroplasty.

Aims: The purpose of this study was to assess the success rate and functional outcomes of bone grafting for periprosthetic bone cysts following total ankle arthroplasty (TAA). Additionally, we evaluated the rate of graft incorporation and identified associated predisposing factors using CT scan. Methods: We reviewed a total of 37 ankles (34 patients) that had undergone bone grafting for periprosthetic bone cysts. A CT scan was performed one year after bone grafting to check the status of graft incorporation. For accurate analysis of cyst volumes and their postoperative changes, 3D-reconstructed CT scan processed with 3D software was used. For functional outcomes, variables such as the Ankle Osteoarthritis Scale score and the visual analogue scale for pain were measured. Results: Out of 37 ankles, graft incorporation was successful in 30 cases. Among the remaining seven cases, four (10.8%) exhibited cyst re-progression, so secondary bone grafting was needed. After secondary bone grafting, no further progression has been noted, resulting in an overall 91.9% success rate (34 of 37) at a mean follow-up period of 47.5 months (24 to 120). The remaining three cases (8.1%) showed implant loosening, so tibiotalocalcaneal arthrodesis was performed. Functional outcomes were also improved after bone grafting in all variables at the latest follow-up (p < 0.05). The mean incorporation rate of the grafts according to the location of the cysts was 84.8% (55.2% to 96.1%) at the medial malleolus, 65.1% (27.6% to 97.1%) at the tibia, and 81.2% (42.8% to 98.7%) at the talus. Smoking was identified as a significant predisposing factor adversely affecting graft incorporation (p = 0.001). Conclusion: Bone grafting for periprosthetic bone cysts following primary TAA is a reliable procedure with a satisfactory success rate and functional outcomes. Regular follow-up, including CT scan, is important for the detection of cyst re-progression to prevent implant loosening after bone grafting.

Discrepancies Between Intraoperative and Postoperative Ankle Motion Measured for Anterior-Approach Total Ankle Arthroplasty.

BACKGROUND: Although intraoperative ankle motion serves as a foundational reference for anticipated motion after surgery and guides the addition of procedures to enhance ankle motion in total ankle arthroplasty (TAA), the relationship between intraoperative and postoperative ankle motion remains unclear. This study aimed to investigate the discrepancy between intraoperative and postoperative ankle range of motion (ROM) following TAAs using the anterior-approach, fixed-bearing systems. METHODS: This study retrospectively reviewed 67 patients (67 ankles) who underwent primary TAA at a single institution. Three different types of anterior-approach, fixed-bearing TAA systems were included. Intraoperative fluoroscopy was used to document the maximal dorsiflexion and plantar flexion at the end of the case. Standardized weightbearing maximum dorsiflexion and plantar flexion sagittal radiographs were obtained pre- and postoperatively, following a previously described method. The motion between 3 different time points (preoperative, intraoperative, and postoperative [mean 11.4 months]) was compared using pairwise t tests, and their differences were quantified. RESULTS: The mean total tibiotalar ROM was 38.1 degrees (SD 7.8) intraoperatively, and the postoperative total tibiotalar ROM was 24.2 degrees (SD 9.7) (P < .001), indicating that a mean of 65.3% (SD 26.7) of the intraoperative motion was maintained postoperatively. Intraoperative dorsiflexion (mean 11.6 [SD 4.5] degrees) showed no evidence of difference from postoperative dorsiflexion (mean 11.4 [SD 5.8] degrees, P > .99), indicating that a median of 95.6% (interquartile range: 66.2-112) of the intraoperative maximum dorsiflexion was maintained postoperatively. However, there was a significant difference between intraoperative plantarflexion (mean 26.4 [SD 6.3]) and postoperative plantarflexion (12.8 [SD 6.9] degrees, P < .001), indicating a mean 50.6% (SD 29.6) of intraoperative motion maintained in the postoperative assessment. There was an improvement of 2.5 degrees in the total tibiotalar ROM following TAA with statistical significance (P < .043). CONCLUSION: This study revealed a significant difference between intraoperative ankle ROM and ankle ROM approximately 1 year after anterior-approach, fixed-bearing TAA, mainly due to plantarflexion motion restriction. Minimal difference in dorsiflexion suggests the importance of achieving the desired postoperative dorsiflexion motion during the surgery using the best possible adjunct procedures. LEVEL OF EVIDENCE: Level IV, case series.

Implant Choice May Reduce the Risk of Early Mechanical Failure in Total Ankle Replacement.

BACKGROUND: Total ankle replacements (TARs) have rapidly advanced in terms of volume, technique, design, and indications. However, TARs are still at risk for early mechanical failure and revision. Prior studies have investigated potential risk factors for failure, but have been limited to smaller series or older implants. This study sought to identify risk factors for early mechanical failure in modern TAR. METHODS: This is a retrospective study of a single-institution registry. Five surgeons contributed cases involving patients who underwent a primary TAR with any implant. Implants were grouped on the basis of the type of fixation. The primary outcome was early mechanical failure (revision with component removal for a non-infectious etiology, that is, subsidence, aseptic loosening, and/or malalignment). Logistic regression determined the effects of age, weight, hindfoot arthrodesis, implant type, and radiographic deformity on failure. RESULTS: The 731 included patients had a mean follow-up of 2.7 years. Ten percent (71 patients) had hindfoot arthrodesis. There were 33 mechanical failures (4.5%) at a mean of 1.7 years after the index surgical procedure. Our model demonstrated that hindfoot arthrodesis was associated with 2.7 times greater odds of failure (p = 0.045), every 10 kg of body weight increased the odds of tibial-sided failure by 1.29 times (p = 0.039), and implants with more extensive tibial fixation (stems or keels) lowered the odds of tibial failure by 95% (p = 0.031). CONCLUSIONS: In patients with uncontrollable risk factors (hindfoot arthrodesis) or risk factors that may or may not be modifiable by the patient (weight), implants with more robust tibial fixation may be able to reduce the risk of early mechanical failure. Further research is warranted to support efforts to decrease early failure in TAR. LEVEL OF EVIDENCE: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

A macro-micro FE and ANN framework to assess site-specific bone ingrowth around the porous beaded-coated implant: an example with BOX® tibial implant for total ankle replacement.

The use of mechanoregulatory schemes based on finite element (FE) analysis for the evaluation of bone ingrowth around porous surfaces is a viable approach but requires significant computational time and effort. The aim of this study is to develop a combined macro-micro FE and artificial neural network (ANN) framework for rapid and accurate prediction of the site-specific bone ingrowth around the porous beaded-coated tibial implant for total ankle replacement (TAR). A macroscale FE model of the implanted tibia was developed based on CT data. Subsequently, a microscale FE model of the implant-bone interface was created for performing bone ingrowth simulations using mechanoregulatory algorithms. An ANN was trained for rapid and accurate prediction of bone ingrowth. The results predicted by ANN are well comparable to FE-predicted results. Predicted site-specific bone ingrowth using ANN around the implant ranges from 43.04 to 98.24%, with a mean bone ingrowth of around 74.24%. Results suggested that the central region exhibited the highest bone ingrowth, which is also well corroborated with the recent explanted study on BOX®. The proposed methodology has the potential to simulate bone ingrowth rapidly and effectively at any given site over any implant surface.

The effect of total ankle arthroplasty on mechanical energy exchange.

Total ankle arthroplasty (TAA) is a common surgical solution for patients with debilitating arthritis of the ankle. Prior to surgery patients experience high levels of pain and fatigue and low mechanical energy recovery. It is not known if TAA restores healthy levels of mechanical energy recovery in this patient population. This study was designed to determine whether mechanical energy recovery was restored following TAA. Ground reaction forces during self-selected speed walking were collected from patients with symptomatic, unilateral ankle arthritis (N = 29) before and one and two years after primary, unilateral TAA. The exchange of potential (PE) and kinetic (KE) energy was examined, and direction of change (%congruity) and energy exchange (%recovery) between the two curves was calculated, with those subjects with low congruity experiencing high energy recovery. Linear regressions were used to examine the impact of walking speed, congruity, and amplitude of the center of mass (COM) displacement on %recovery, while ANOVA and ANCOVA models were used to compare energy recovery and congruity across the three time points. Gender, BMI, and age at surgery had no effect in this study. TAA improved walking speed (p = 0.001), increased energy recovery (p = 0.020), and decreased congruity (p = 0.002), and these levels were maintained over at least two years. Differences in congruity were independent of walking speed. In some patients, especially those who are severely debilitated by ankle arthritis, TAA is effective in restoring mechanical energy recovery to levels similar to an asymptomatic population of a similar age recorded by other studies.

Diagnosis and Management of Infected Total Ankle Replacements.

As the number of primary total ankle replacements increases for treatment of end-stage ankle arthritis, failures are also expected to rise. Periprosthetic joint infection is among the causes of failures and has been reported to be as high as 5%. Diagnosis is usually made by a combination of clinical examination findings, imaging, laboratory, and microbiological workup. Management is generally separated into limb salvage or amputation. Limb salvage can be challenging and may involve a single versus staged approach. Options include revision arthroplasty or arthrodesis procedures (ankle versus tibiotalocalcaneal), and a multidisciplinary approach is sought to eradicate infection before definitive management.

Outcomes of Total Ankle Arthroplasty After Reoperation due to Gutter Impingement.

Gutter impingement is one of the most common causes of subsequent surgery after total ankle arthroplasty (TAA). Although gutter debridement has been reported to resolve preoperative symptoms early on, persistent pain after surgery, recurrence, and poor functional outcome scores have been described in patients who have undergone reoperation for gutter debridement. The cause of gutter impingement after TAA is multifactorial, and a better understanding of its causes and optimal surgical techniques for intervention is needed.

Outcomes of Total Ankle Arthroplasty After Periprosthetic Cyst Curettage and Bone Grafting.

Total ankle arthroplasty (TAA) has become a popular management option for ankle arthritis. Periprosthetic osteolysis is one of the most common causes for reoperation in TAA. A CT scan should be done in all suspected osteolysis cases to confirm location, quantify size and aid in surgical planning. These patients are often asymptomatic with limited evidence regarding appropriate management. Smaller lesions should be monitored for progression in size. Periprosthetic cysts measuring 10-15mm in all three axes should be considered for debridment and curettage with autogenous bone grafting. The authors believe that bone grafting of large asymptomatic periprosthetic cysts could prevent implant failure.

Quality of Outcomes Research in Total Ankle Arthroplasty.

Total ankle arthroplasty is a topic that has recently gained increasing interest, largely due to the improved outcomes, which have been demonstrated by short- and mid-term research studies on the newer, third-generation implant designs. The purpose of this review is to provide an updated assessment of the quality of outcomes research on total ankle arthroplasty.

Clinical Outcomes and Registry Data in Total Ankle Arthroplasty.

Total ankle arthroplasty (TAA) is an effective treatment for end-stage ankle arthritis consistently demonstrating good to excellent outcomes, even when considering factors such as deformity, patient age, bilaterality, and arthritis etiology. There is little consensus in the literature with regard to preferred patient-reported outcome metrics (PROMs) for assessing outcomes, although all metrics generally improve following TAA. Several countries have successful registries to track longevity of TAA in populations; however, PROMs are generally not successfully tracked in registries. A trend toward consensus on outcome metrics and collaborative registries is warranted to optimize patient selection and outcomes in TAA.

Results of Total Ankle Arthroplasty Versus Ankle Arthrodesis.

No differences have been found between total ankle arthroplasty (TAA) and ankle arthrodesis (AA) with respect to patient-reported outcome measures (PROMs), although both interventions were shown to improve PROMs with respect to the preoperative situation. That is, both interventions (AA and TAA) were effective in improving preoperative symptoms. On the other hand, 2-year complication rates were higher after AA (27%) than after TAA (16%); however, infection rates were similar (4%). The published revision rate after AA is 16% versus 11% after TAA. In short, TAA and AA appear to offer the same PROMs, but TAA has a lower rate of complications (except for infection) and revisions.

Diagnosing and Managing Infection in Total Ankle Replacement.

Infections after total ankle replacement (TAR) within the first 4 weeks after implantation can be managed successfully with 1 or several debridements, irrigation, and a change of polyethylene inlay. Late infections require implant removal. Low-grade infections might be an underestimated problem so far. Although single-surgery revisions are reported in the literature, the authors' experience with 2-stage revisions using an antibiotics-loaded bone cement spacer is better. Additional antibiotics are used to support the surgical treatment. After antibiotic therapy of 12 weeks, the final treatment includes ankle or tibio-talo-calcaneal fusion and, with limitations, revision TAR.

Total Ankle Arthroplasty in Young Patients.

With continuing advancements in total ankle arthroplasty (TAA), it is quickly becoming the procedure of choice for older patients with end-stage ankle arthritis. Multiple studies have been conducted on younger patients who have undergone TAA with promising results, but is it the procedure of choice? Considerations of TAA versus ankle arthrodesis, TAA implant longevity, outcomes of revision TAA, and whether patients should be offered an arthrodesis with plans for conversion to arthroplasty may help elucidate whether pursuing ankle arthroplasty in a younger, more active population is the correct approach for surgeons.

Complications in Total Ankle Replacement.

The debate between ankle arthrodesis and total ankle replacement for patients with end-stage arthritis of the ankle joint is an ongoing topic in orthopedic surgery. Ankle arthrodesis, or fusion, has been the traditional treatment for ankle arthritis. It involves fusing the bones of the ankle joint together, eliminating the joint and creating a solid bony union. Arthrodesis is effective in reducing pain in the ankle, but it results in a loss of ankle motion. This can increase the load on adjacent joints, such as the subtalar joint, which may lead to accelerated degeneration and arthritis in those joints over time.

Outcomes of Total Ankle Replacement with Preoperative Varus Deformity.

Historically, coronal plane deformities of greater than 10° to 15° have been deemed contraindications for total ankle replacement (TAR). However, recent studies show satisfactory results in TAR with severe preoperative varus deformity. When correctly applying ancillary procedures, preoperative varus deformity can be structurally corrected, resulting in similar clinical scores to those obtained with "regular TAR." However, complications and revisions appear to increase with increasing deformity. Unfortunately, results of TAR in varus ankles consist of heterogeneous data (eg, with regards to prosthetic brands, bearing-types, duration of follow-up, and ancillary procedures) precluding strict conclusions. This could be solved by an international consensus group.