Variation analysis of atmospheric 7Be activity concentrations with respect to precipitation.

Beryllium-7 activity concentrations in the atmosphere and precipitation were continuously measured every day between April 2011 and December 2015 in Dazaifu, western Japan. The measured data were quantitatively analyzed to determine the precipitation-induced variation in 7Be activity concentrations. The average concentrations on nonprecipitation and precipitation days were 5.5 and 3.8 mBq/m3, respectively. This difference of 31% (1.7 mBq/m3) on average, was attributable to the washout effect, which was more significant in the summer. Regarding the association between 7Be activity concentration and precipitation, the concentration remained at a similar level for the small precipitation amount of <5.0 mm/day and showed a decreasing trend (but was insignificant) for the precipitation of 5.0-10.0 mm/day. A significant decrease in the concentration was observed for ≥10 mm/day. Furthermore, when precipitation occurred on two successive days, the 7Be activity concentrations on the second day significantly decreased regardless of precipitation.

Biochar and silicon relegate the adversities of beryllium stress in pepper by modulating methylglyoxal detoxification and antioxidant defense mechanism.

Industrial activities have escalated beryllium (Be) release in environment which negatively affect plant growth and human health. This investigation describes Be-induced stress in pepper and its palliation by application of pineapple fruit peel biochar (BC) and potassium silicate (Si). The treatment of Be reduced seedling length, biomass, and physiological attributes and enhanced electrolyte leakage, hydrogen peroxide (H2O2), superoxide (O2•-) level in pepper plants; however, these oxidative stress markers were reduced with combined treatment (Be + BC + Si). Application of BC and Si also lowered Be cumulation in roots and shoots of pepper. Under combined treatment, superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), and glutathione reductase (GR) activities exhibited significant enhancement 19, 7.6, 22.8, and 48%, respectively, in Be-stressed pepper. The Be + BC + Si increased peroxidase (POD), glutathione S-transferase (GPX), and glutathione peroxidase (GST) activities 121, 55, and 53%, respectively, as compared to Be-treated pepper. Methylglyoxal level was reduced in pepper with rise in glyoxalase I and II enzymes. Thus, combined application of SS and BC effectively protects pepper against oxidative stress induced by Be by increasing both antioxidant defense and glyoxalase systems. Hence, pineapple fruit peel biochar along with potassium silicate can be used for enhancing crop productivity under Be-contaminated soil.

Effect of IRSL-BLSL-TSL reading modes combination on thermoluminescence (TL) response of BeO dosimeter.

The ultimate goal of this work is the study of the effect of luminescence stimulations and signals reading modes combinations on the thermoluminescence intensity and glow curve behaviour for the same X-ray irradiation dose. Three interesting stimulating and reading modes are considered, namely, infrared stimulated luminescence (IRSL), blue light-emitting diode stimulated luminescence (BLSL) and thermally stimulated luminescence (TSL). The studied stimulation and reading modes combination protocols are (Protocol 1) IRSL-TSL, (Protocol 2) IRSL-BLSL-TSL and (Protocol 3) BLSL-IRSL-TSL. Experiments are performed on beryllium oxide (BeO) dosimeter. Results demonstrate well that the combination of reading modes have direct impact on the TL signal in terms of intensity and glow curve shape. It was also found that when reading modes are correctly combined, particularly when IRSL is applied first, then BLSL and TL, it is possible to collect two or more exploitable signals of different stimulation types for the same irradiation that can be used for different purposes and final applications.

[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Comparison of 755-nm picosecond alexandrite laser versus 1064-nm Q-switched Nd:YAG laser for melasma: A randomized, split-face controlled, 2-year follow-up study.

OBJECTIVES: Pulsed laser treatment of melasma has shown some promising results. To compare the effectiveness and safety of 755-nm picosecond alexandrite laser (PSAL) fitted with diffractive lens array (DLA) versus 1064-nm Q-switched neodynimum:yttrium aluminum garnet laser (QSNYL) for the treatment of melasma. METHODS: We conducted a randomized, split face controlled, 2-year follow-up study. Each face was divided into two parts, each side receiving three treatments with either PSAL or QSNYL at 1 month intervals. Modified Melasma Area Severity Index scores (mMASI), pain scores, patient satisfaction and adverse events were recorded. In vivo reflectance confocal microscopy (RCM) images were acquired. RESULTS: Twenty subjects were enrolled and three dropped out. At 6 months, mMASI scores were significantly lower than baseline for QSNYL sides (p = 0.022), with no statistically significant difference between PSAL sides before and after treatment, PSAL sides versus QSNYL sides, or patient satisfaction scores. QSNYL treatment was associated with less pain (p = 0.014). No serious adverse events were reported. In the PSAL sides RCM showed a large number of dendritic melanocytes infiltrated in the dermis at 2 weeks and 4 weeks after treatment. Ten patients (58.82%) reported recurrence or exacerbation at 2-year follow-up with no statistically significant difference between the two lasers. CONCLUSIONS: QSNYL demonstrated short term clinical efficacy for melasma, but did not provide any additional benefit compared to PSAL with DLA. QSNYL was associated with less pain. There was a high recurrence rate at 2-year follow-up. RCM allowed the detection of cellular changes in melasma lesions.

Mortality Among Individuals Diagnosed With Chronic Beryllium Disease and Beryllium Sensitization.

OBJECTIVE: The aim of the study is to investigate the cause of death among individuals diagnosed with chronic beryllium disease (CBD) or beryllium sensitization (BeS). METHODS: Vital status, cause of death, and standardized mortality ratios for the underlying cause of death were determined for a cohort of 354 individuals with CBD and 290 individuals with BeS. RESULTS: Among 216 deceased individuals, 153 had CBD and 63 had BeS. Nonmalignant respiratory deaths and other causes of death were significantly increased among those with CBD. No cause of death was significantly increased for BeS. Mortality from lung cancer was not increased. CONCLUSIONS: Individuals with CBD had an overall increased mortality risk due to increased respiratory mortality regardless of their duration of exposure to beryllium. Individuals with BeS did not have increased respiratory mortality. No increased risk of lung cancer was seen among this cohort.

Application of MLP neural network to predict X-ray spectrum from tube voltage, filter material, and filter thickness used in medical imaging systems.

The X-ray energy spectrum is crucial for image quality and dosage assessment in mammography, radiography, fluoroscopy, and CT which are frequently used for the diagnosis of many diseases including but not limited to patients with cardiovascular and cerebrovascular diseases. X-ray tubes have an electron filament (cathode), a tungsten/rubidium target (anode) oriented at an angle, and a metal filter (aluminum, beryllium, etc.) that may be placed in front of an exit window. When cathode electrons meet the anode, they generate X-rays with varied energies, creating a spectrum from zero to the electrons' greatest energy. In general, the energy spectrum of X-rays depends on the electron beam's energy (tube voltage), target angle, material, filter thickness, etc. Thus, each imaging system's X-ray energy spectrum is unique to its tubes. The primary goal of the current study is to develop a clever method for quickly estimating the X-ray energy spectrum for a variety of tube voltages, filter materials, and filter thickness using a small number of unique spectra. In this investigation, two distinct filters made of beryllium and aluminum with thicknesses of 0.4, 0.8, 1.2, 1.6, and 2 mm were employed to obtain certain limited X-ray spectra for tube voltages of 20, 30, 40, 50, 60, 80, 100, 130, and 150 kV. The three inputs of 150 Multilayer Perceptron (MLP) neural networks were tube voltage, filter type, and filter thickness to forecast the X-ray spectra point by point. After training, the MLP neural networks could predict the X-ray spectra for tubes with voltages between 20 and 150 kV and two distinct filters made of aluminum and beryllium with thicknesses between 0 and 2 mm. The presented methodology can be used as a suitable, fast, accurate and reliable alternative method for predicting X-ray spectrum in medical applications. Although a technique was put out in this work for a particular system that was the subject of Monte Carlo simulations, it may be applied to any genuine system.

Elevated CO2 differentially attenuates beryllium-induced oxidative stress in oat and alfalfa.

Elevated CO2 (eCO2 ) is one of the climate changes that may benefit plant growth under emerging soil contaminants such as heavy metals. In this regard, the morpho-physiological mechanisms underlying the mitigating impact of eCO2 on beryllium (Be) phytotoxicity are poorly known. Hence, we investigated eCO2 and Be interactive effects on the growth and metabolism of two species from different groups: cereal (oat) and legume (alfalfa). Be stress significantly reduced the growth and photosynthetic attributes in both species, but alfalfa was more susceptible to Be toxicity. Be stress induced reactive oxygen species (ROS) accumulation by increasing photorespiration, subsequently resulting in increased lipid and protein oxidation. However, the growth inhibition and oxidative stress induced by Be stress were mitigated by eCO2 . This could be explained, at least partially, by the increase in organic acids (e.g., citric acid) released into the soil, which subsequently reduced Be uptake. Additionally, eCO2 reduced cellular oxidative damage by reducing photorespiration, which was more significant in alfalfa plants. Furthermore, eCO2 improved the redox status and detoxification processes, including phytochelatins, total glutathione and metallothioneins levels, and glutathione-S-transferase activity in both species, but to a greater extend in alfalfa. In this context, eCO2 also stimulated anthocyanin biosynthesis by accumulating its precursors (phenylalanine, coumaric acid, cinnamic acid, and naringenin) and key biosynthetic enzymes (phenylalanine ammonia-lyase, cinnamate hydroxylase, and coumarate:CoA ligase) mainly in alfalfa plants. Overall, this study explored the mechanistic approach by which eCO2 alleviates the harmful effects of Be. Alfalfa was more sensitive to Be stress than oats; however, the alleviating impact of eCO2 on Be stress was more pronounced in alfalfa.

Dual-wavelength long-pulsed 755-nm alexandrite/1,064-nm Nd:YAG laser versus Nd:YAG alone for treatment of palmoplantar verruca.

We compared the effectiveness and safety of the long-pulsed neodymium-doped yttrium-aluminum-garnet (Nd:YAG) laser alone and combined with a 755-nm alexandrite laser for treating palmoplantar warts. We divided patients into two groups to receive up to four monthly treatments with Nd:YAG alone (single-wavelength) or combined with the alexandrite laser (dual-wavelength). We assessed treatment responses (according to clearance rate), vascular/hyperkeratosis grades, and patient satisfaction and pain ratings. The differences in treatment response (p = .348), patient satisfaction (p = .560), and pain ratings (p = .728) between the groups were not significant. The single- and dual-wavelength treatment options were equally effective in treating recalcitrant palmoplantar warts.

Removal of Unwanted Hair: Efficacy and Safety of 755-nm Alexandrite Laser Equipped with a 30 mm Spot Handpiece.

Background: Alexandrite 755 nm laser has been currently recognized one of the gold standards for the permanent hair removal business because of its sufficient tissue penetration and higher affinity for melanin compared with Nd:YAG, making the treatment more incisive and effective. Objective: In this study, we evaluated an Alexandrite 755 nm laser with a 30-mm spot for a new and fast hair removal treatment. Methods: Patients of both genders, with skin Fitzpatrick's types, ranging from II to III, were asked to avoid any epilation techniques 4 weeks before the laser hair removal session. Participants underwent a minimum of three to a maximum of eight sessions of treatment, every 6 weeks. Six months after the last treatment, the final evaluation was completed. The treated body areas included arms, legs, axillae, and trunk. The subjects used a numeric scale with a range of 0 to 10 (0: no pain, 10: unbearable), to indicate the associated pain level experienced. By comparing the percentage of terminal hairs before and after laser treatment, hair reduction was determined. Results: The patients reported only slight post-treatment erythema that disappeared after a few hours and only two patients showed persistent erythema lasting a few weeks. The pain was found to be 4.9 ± 0.9 after single pass emission. Conclusions: The 755 nm laser with the new handpiece has proven to be an ideal wavelength for hair removal, allowing efficient, safe, and faster treatments to be performed for the patient.

Atmospheric depositional fluxes of 210Pb in bulk precipitation at the Adriatic coast, Croatia.

The atmospheric bulk depositional fluxes of 210Pb were measured at a station on the Adriatic coast, Croatia over 4 years period from March 2017 to December 2020. The monthly depositional fluxes followed oceanic deposition patterns with a lower flux between 0.0735 and 16.9 Bq m-2 month-1. The volume-weighted activities were 0.000514 and 1.35 Bq L-1 and decreased with increasing precipitation. A clear seasonal trend was observed with higher depositional flux in autumn and minimum value in the winter season. The average annual bulk depositional flux and volume-weighted activities of 210Pb were 73.8 Bq m-2 y-1 and 0.119 Bq L-1 respectively. The precipitation normalized enrichment factor (α) indicates higher depositional fluxes of 210Pb during summer and spring than desired value according to the amount of precipitation. We found that the 210Pb depositional fluxes in the coastal stations are lower due to 210Pb-depleted oceanic air masses and increase with the amount of precipitation.

Proposing an intelligent technique based on radial basis function neural network to forecast the energy spectrum of diagnostic X-ray imaging systems.

In digital subtraction angiography (digital subtraction total cerebral angiography), cardiac and macrovascular cardiography, anorectal radiology, fluoroscopy, and computed tomography (CT), a prior knowledge to X-ray energy spectrum is crucial for assessing the image quality and also calculating patient X-ray dosage. The present investigation's main objective is to propose an intelligent technique for faster calculating X-ray energy spectrum of medical imaging systems with different exposure settings of tube voltage, filter material, and thickness based on limited specific spectra. In this study, Monte Carlo N Particle (MCNP) simulation code was initially used to generate some limited X-ray spectra for tube voltages of 20, 30, 40, 50, 80, 100, 130, and 150 kV for two different filters of beryllium and aluminum with thicknesses of 0. 4, 0.8, 1.2, 1.6 and 2 mm. Tube voltage, type, and thickness of filter were used as the 3 inputs of 150 Radial Basis Function Neural Network (RBFNN) to forecast point by point of the X-ray spectrum. After training, the RBFNNs could forecast most of the X-ray spectra for tube voltages in the range of 20-150 kV and two various filters of aluminum and beryllium with thicknesses in the range of 0-2 mm.

Effect of mechanical-chemical modification on adsorption of beryllium by calcite.

The treatment of beryllium wastewater has become a major problem in industry. In this paper, CaCO3 is creatively proposed to treat beryllium-containing wastewater. Calcite was modified by an omnidirectional planetary ball mill by a mechanical-chemical method. The results show that the maximum adsorption capacity of CaCO3 for beryllium is up to 45 mg/g. The optimum treatment conditions were pH = 7 and the amount of adsorbent was 1 g/L, and the best removal rate was 99%. The concentration of beryllium in the CaCO3-treated solution is less than 5 µg/L, which meets the international emission standard. The results show that the surface co-precipitation reaction between CaCO3 and Be (II) mainly occurs. Two different precipitates are generated on the used-CaCO3 surface; one is the tightly connected Be (OH)2 precipitation, and the other is the loose Be2(OH)2CO3 precipitation. When the pH of the solution exceeds 5.5, Be2+ in the solution is first precipitated by Be (OH)2. After CaCO3 is added, CO32- will further react with Be3(OH)33+ to form Be2(OH)2CO3 precipitation. CaCO3 can be considered as an adsorbent with great potential to remove beryllium from industrial wastewater.

Toxic metals and the risks of sludge from the treatment of wastewater from beryllium smelting.

The release of highly toxic beryllium in sludge (BCS) produced by physico-chemical treatment of beryllium-containing wastewater from Be smelting production has become a growing concern with the widespread use of Be in the defense industry. This work investigated the potential mobility of Be in BCS. The toxicity characteristic leaching procedure (TCLP) of BCS showed that the amount of leached Be was up to 202 mg L-1, which exceeded the regulated limit by nearly 10,000 times. The chemical fractionation analysis further revealed that the excessive amount of Be leached from BCS was contributed to the high content of acid-soluble fraction and reducible fraction of Be, which accounted for over 70% of the Be content. The results obtained from mineralogical automatic analyzer (MLA) showed that gypsum (23.23%) and epidote (19.55%) were the two major mineralogical phases of BCS. Both were small and loosely structured agglomerated particles with a D50 of 6.61 µm and 3.31 µm. ToF-SIMS results revealed that the Be distribution on the surface of BCS particles was relatively dispersed, with no aggregation or encapsulation. Be co-precipitated with gypsum and chlorite in the form of unstable Be(OH)2, which attached to the surface of these small particles. The unstable state of Be and the small size, loose structure and high liberation of the host material phases are the main reasons for the high leaching mobility of Be. The results of the risk assessment indicated that BCS posed an extremely high potential ecological risk, with Be being the most significant contributor.

Shaping of topography by topographically-controlled vegetation in tropical montane rainforest.

Topography is commonly viewed as a passive backdrop on which vegetation grows. Yet, in certain circumstances, a bidirectional feedback may develop between the control of topography and the spatial distribution of vegetation and landform development, because vegetation modulates the erosion of the land surface. Therefore, if reinforcing feedbacks are established between erosion and land cover distribution over timescales relevant to landform development, then the interactions between vegetation and topography may create distinctive landforms, shaped by vegetation. We expose here a strong correlation between the spatial distribution of vegetation, erosion rates, and topography at a characteristic length scale of 102-103m (mesoscale topography) in the Luquillo Experimental forest (LEF) of Puerto Rico. We use high-resolution LiDAR topography to characterize landforms, satellite images to classify the vegetation into forest types, and in-situ produced cosmogenic 10Be in the quartz extracted from soils and stream sediments to document spatial variations in soil erosion. The data document a strong correlation between forest type and topographic position (hilltop vs. valleys), and a correlation between topographic position and 10Be-derived erosion rates over 103-104 years. Erosion is faster in valleys, which are mostly covered by monocot Palm Forest, and slower on surrounding hills mostly covered by the dicot Palo Colorado Forest. Transition from one forest type to the next occurs across a break-in-slope that separates shallowly convex hilltops from deeply concave valleys (coves). The break-in-slope is the consequence of a longer-lasting erosional imbalance whereby coves erode faster than hills over landscape-shaping timescales. Such a deepening of the coves is usually spurred by external drivers, but such drivers are here absent. This implies that cove erosion is driven by a process originating within the coves themselves. We propose that vegetation is the primary driver of this imbalance, soil erosion being faster under Palm forest than under Palo Colorado forest. Concentration of the Palm forest in the deepening coves is reinforced by the better adaptation of Palm trees to the erosive processes that take place in the coves, once these develop steep slopes. At the current rate of landscape development, we find that the imbalance started within the past 0.1-1.5 My. The initiation of the process could correspond to time of settlement of these mountain slopes by the Palm and Palo Colorado forests.

THE NATIONAL RESEARCH COUNCIL OF CANADA MANGANESE BATH SYSTEM.

The manganese salt bath is considered a primary standard for determining the absolute emission rate of radionuclide neutron sources. The National Research Council of Canada has recently revived its manganese salt bath and a full description of the system is given here. The physical characteristics of the bath, as well as the methods for determining the efficiency of the bath system and the induced activity in the bath, are described. An in-depth analysis of the fraction of neutrons captured in the manganese and the correction factor for neutron losses is also provided. Finally, the results of emission rate measurements of four different sources, complete with an uncertainty budget, are given. The emission rates of three americium-beryllium neutron sources and one californium-252 neutron source were found to agree with the known values, within a standard uncertainty of 1.7%.