RESUMO
OBJECTIVE: To evaluate the outcome of Augmented reality technology in the recognizing of oral and maxillofacial anatomy. METHODS: This study was conducted on the undergraduate students in Peking University School of Stomatology who were learning oral and maxillofacial anatomy. The image data were selected according to the experiment content, and the important blood vessels and bone tissue structures, such as upper and lower jaws, neck arteries and veins were reconstructed in 3D(3-dimensional) by digital software to generate experiment models, and the reconstructed models were encrypted and stored in the cloud. The QR (quick response) code corresponding to the 3D model was scanned by a networked mobile device to obtain augmented reality images to assist experimenters in teaching and subjects in recognizing. Augmented reality technology was applied in both the theoretical explanation and cadaveric dissection respectively. Subjects' feedback was collected in the form of a post-class questionnaire to evaluate the effectiveness of augmented reality technology-assisted recognizing. RESULTS: In the study, 83 undergraduate students were included as subjects in this study. Augmented reality technology could be successfully applied in the recognizing of oral and maxillofacial anatomy. All the subjects could scan the QR code through a connected mobile device to get the 3D anatomy model from the cloud, and zoom in/out/rotate the model on the mobile. Augmented reality technology could provide personalized 3D model, based on learners' needs and abilities. The results of likert scale showed that augmented reality technology was highly recognized by the students (9.19 points), and got high scores in terms of forming a three-dimensional sense and stimulating the enthusiasm for learning (9.01 and 8.85 points respectively). CONCLUSION: Augmented reality technology can realize the three-dimensional visualization of important structures of oral and maxillofacial anatomy and stimulate students' enthusiasm for learning. Besides, it can assist students in building three-dimensional space imagination of the anatomy of oral and maxillofacial area. The application of augmented reality technology achieves favorable effect in the recognizing of oral and maxillofacial anatomy.
Assuntos
Realidade Aumentada , Imageamento Tridimensional , Humanos , Imageamento Tridimensional/métodos , Anatomia/educação , Boca/anatomia & histologia , SoftwareRESUMO
INTRODUCTION: It is important to generate predictable statistical models by increasing the number of variables on the human skeletal and soft tissue structures on the face to increase the accuracy of human facial reconstructions. The purpose of this study was to determine mouth width 3-dimensionally based on statistical regression model. MATERIAL AND METHODS: Cone-beam computed tomography scan data from 130 individuals were used to measure the horizontal and vertical dimensions of orbital and nasal structures and intercanine width. The correlation between these hard tissue variables and the mouth width was evaluated using the statistical regression model. RESULTS: Orbital width, nasal width, and intercanine width were found to be strong predictors of the mouth width determination and were used to generate the regression formulae to find the most approximate position of the mouth. CONCLUSION: These specific variables may contribute to improving the accuracy of mouth width determination for oral and maxillofacial reconstructions.
Assuntos
Face , Reconstrução Mandibular , Boca , Análise de Regressão , Boca/anatomia & histologia , Boca/diagnóstico por imagem , Face/anatomia & histologia , Face/diagnóstico por imagem , Dente/anatomia & histologia , Dente/diagnóstico por imagem , Olho/anatomia & histologia , Olho/diagnóstico por imagem , Nariz/anatomia & histologia , Nariz/diagnóstico por imagem , Tomografia Computadorizada de Feixe Cônico , HumanosRESUMO
The feeding habits and habitats of fish influence the morphology of the oral cavity. This study used gross anatomy, light microscopy, and scanning electron microscopy, in addition to morphometric analysis, to investigate the anatomical characteristics of the oral cavity roof in Pagrus pagrus and Boops boops, which have different dietary habits. The oral cavity roof appeared U-shaped and divided into the palate and upper pharyngeal regions. The upper lip of P. pagrus was broad, while B. boops' upper lip was small and thin. Both species had a stratified squamous epithelium with an irregular shape and a folded surface. P. pagrus had a horseshoe-shaped upper velum with a high middle part, and its surface resembled sea waves with obvious mucous-secreting openings with cilia and many folds and grooves between them. B. boops's upper velum was thin and appeared as a triangle pouch with a pointed cranial apex. The palate in both species was narrow in the front and increased in width backward until it ended. The upper pharyngeal teeth in P. pagrus appeared as two patches, separated by a median longitudinal ridge and an anterior V-shape separator. Meanwhile, in B. boops, they appeared as a ball patch on both sides and a separator ridge in the middle. Because P. pagrus fed on harder structures than B. boops, their feeding habits were reflected in the structure of the oral cavity roof. P. pagrus, a carnivorous species, had several rows of sharp upper jaw and upper pharyngeal teeth, thick spinous tubercles on oblique transverse ridges, and massive mucous glands. On the other hand, B. boops, an omnivorous species, had only one row of upper jaw teeth, a few upper pharyngeal teeth scattered on two oval patches, and thin filaments on the oblique transverse ridges.
Assuntos
Comportamento Alimentar , Boca , Perciformes , Animais , Boca/anatomia & histologia , Perciformes/anatomia & histologia , Perciformes/fisiologia , Microscopia Eletrônica de Varredura/veterinária , Especificidade da EspécieRESUMO
Horned frogs, members of the Ceratophryidae family, encompass a group of anurans varying in size and behavior, yet unified by morphological and behavioral traits enabling them to adopt a megalophagous diet (i.e., large prey feeding). Although the group has been the focus of numerous studies, our understanding of its feeding behavior remains limited. In this study, we characterize the feeding mechanism in five species representing the three extant genera of ceratophryid anurans, both in terrestrial and aquatic environments. We also explore the ability of Chacophrys pierottii to adjust feeding behavior based on prey type. Our findings show that all species are capable of wide mouth opening, displaying an asymmetric feeding cycle. While tongue usage is the primary method for capturing prey on land, ceratophryids may use their forelimbs to manipulate prey into their mouths, exhibiting different behavioral patterns. C. pierottii shows modulation of its feeding kinematics and is also capable of some modulation of its feeding in response to prey properties.
Assuntos
Anuros , Língua , Animais , Anuros/anatomia & histologia , Fenômenos Biomecânicos , Língua/anatomia & histologia , Boca/anatomia & histologia , Comportamento Alimentar/fisiologia , Comportamento Predatório/fisiologiaRESUMO
The mouth apparatus in larvae of the freshwater mite Limnochares aquatica (L., 1758) (Acariformes, Limnocharidae), belonging to the lower Hydrachnidia, was studied with light microscopy, scanning (SEM) and transmission (TEM) electron microscopy, as well as with confocal laser scanning microscopy (CLSM) to reveal its main morphological and functional characteristics. The gnathosoma, functioning as a mouth organ takes a prognathous position, and inclines to the body axial line at the angle of around 30°. The gnathosoma is composed of segments of the two pairs of anterior appendages and their derivatives - two-segmented chelicerae lying above the infracapitulum - the compound medial portion of the palpal coxae, and five-segmented palps, articulated with the infracapitulum laterally. The palp tibia bears the bifid palpal claw facing downward nearly at right angle. The basal cheliceral segments are free, i.e., are not covered with the integumental fold posteriorly, and do not fuse with each other. Apically, they articulate with the relatively short movable digits composed of the basal portion (lever) and the distal portion (the cheliceral blades) curved upward by their ends. The flexible fixed digits protrude forward from the distal parts of the basal cheliceral segments. The ventral wall of the gnathosoma (mentum) transforms into a very specific papillary area (velum). A papillary area with long slim papillae is formed of a light cuticle and likely acts as a sucker but does not have contractile elements. The hypostome possesses the well developed lateral lips (galea) tightly embracing the distal portions of the chelicerae and hiding the movable digits. The roof of the infracapitulum (the cervix, or epistome) lying beneath the chelicerae, shows a compound structure. Anteriorly it connects with the inner hypostomal walls forming a particular pharyngeal ring framing the narrow mouth opening. We saw no evidence of a labrum. A characteristic valve projects forward from the dorsal surface of the cervix. A crescent-shaped pharynx runs along the bottom of the infracapitulum and is attached but not fused with the cuticle of the papillary area. The dorsal pharyngeal dilators originate on the cervix, sigmoid pieces and the lateral walls of the infracapitulum at their junction with the dorsal walls of the basal cheliceral segments. A pair of sigmoid pieces having small cavities inside serves for termination of the cheliceral elevators originated on the posterior portions of the dorsal walls of the basal cheliceral segments. The organizational pattern of the gnathosoma in larvae of L. aquatica is rather specific and is quite different from those of other aquatic or terrestrial parasitengonin larvae.
Assuntos
Ácaros , Feminino , Animais , Ácaros/ultraestrutura , Larva , Microscopia Eletrônica de Varredura , Microscopia Eletrônica de Transmissão , Boca/anatomia & histologiaRESUMO
Real-time magnetic resonance imaging (rtMRI) is a technique that provides high-contrast videographic data of human anatomy in motion. Applied to the vocal tract, it is a powerful method for capturing the dynamics of speech and other vocal behaviours by imaging structures internal to the mouth and throat. These images provide a means of studying the physiological basis for speech, singing, expressions of emotion, and swallowing that are otherwise not accessible for external observation. However, taking quantitative measurements from these images is notoriously difficult. We introduce a signal processing pipeline that produces outlines of the vocal tract from the lips to the larynx as a quantification of the dynamic morphology of the vocal tract. Our approach performs simple tissue classification, but constrained to a researcher-specified region of interest. This combination facilitates feature extraction while retaining the domain-specific expertise of a human analyst. We demonstrate that this pipeline generalises well across datasets covering behaviours such as speech, vocal size exaggeration, laughter, and whistling, as well as producing reliable outcomes across analysts, particularly among users with domain-specific expertise. With this article, we make this pipeline available for immediate use by the research community, and further suggest that it may contribute to the continued development of fully automated methods based on deep learning algorithms.
Assuntos
Laringe , Canto , Humanos , Imageamento por Ressonância Magnética/métodos , Laringe/diagnóstico por imagem , Laringe/anatomia & histologia , Laringe/fisiologia , Fala/fisiologia , Boca/anatomia & histologia , Boca/fisiologiaRESUMO
Trichiurus lepturus is a carnivorous fish, and most of the previous anatomical research has focused on computed tomography imaging and histology of their teeth and fangs, while the remaining structures of pharyngeal cavity remain unexplored. The present research is the first to use anatomical examinations alongside scanning electron microscopy to investigate the T. lepturus oral cavity. The oropharyngeal roof included teeth, upper lip, rostral and caudal velum and the palate. The middle of the palate showed a median groove flanked by two folds, followed by a median band flanked by micro-folds, thereafter the palate became crescent shaped. The lateral regions of the palate exhibited longitudinal folds that extended rostrally towards the fangs. The oropharyngeal floor had two cavities which acted as a scabbard for the premaxillary fangs and upper velum, while the caudal sublingual cavity contained two oyster-shaped structures on the outer surface plus sublingual ridges and sublingual clefts. The tongue apex exhibited a spoon-like shape, its body demonstrated a median elevation and the root with two lateral branches contained only dome-shaped papillae. Taste buds were located on the upper velum, lower lip and the caudal part of the interbranchial septum. Images and descriptions of T. lepturus tooth structure are also provided. The present research, using anatomical dissection and morphological observation using scanning electron microscopy, has identified the structures of the dentition system, a variety in shapes of the folds and microridges, and identified the taste buds and mucous pores in the T. lepturus oropharyngeal cavity.
Assuntos
Papilas Gustativas , Dente , Animais , Orofaringe/anatomia & histologia , Boca/anatomia & histologia , Língua/anatomia & histologia , Papilas Gustativas/anatomia & histologia , Dente/anatomia & histologia , Microscopia Eletrônica de Varredura/veterináriaRESUMO
Filter-feeding has been present for hundreds of millions of years, independently evolving in aquatic vertebrates' numerous times. Mysticete whales are a group of gigantic, marine filter-feeders that are defined by their fringed baleen and are divided into two groups: balaenids and rorquals. Recent studies have shown that balaenids likely feed using a self-cleaning, cross-flow filtration mechanism where food particles are collected and then swept to the esophagus for swallowing. However, it is unclear how filtering is achieved in the rorquals (Balaenopteridae). Lunging rorqual whales engulf enormous masses of both prey and water; the prey is then separated from the water through baleen plates lining the length of their upper jaw and positioned perpendicular to flow. Rorqual baleen is composed of both major (larger) and minor (smaller) keratin plates containing embedded fringe that extends into the whale's mouth, forming a filtering fringe. We used a multimodal approach, including microcomputed tomography (µCT) and scanning electron microscopy (SEM), to visualize and describe the variability in baleen anatomy across five species of rorqual whales, spanning two orders of magnitude in body length. For most morphological measurements, larger whales exhibited hypoallometry relative to body length. µCT and SEM revealed that the major and minor plates break away from the mineralized fringes at variable distances from the gums. We proposed a model for estimating the effective pore size to determine whether flow scales with body length or prey size across species. We found that pore size is likely not a proxy for prey size but instead, may reflect changes in resistance through the filter that affect fluid flow.
Assuntos
Comportamento Alimentar , Boca , Animais , Microtomografia por Raio-X , Boca/anatomia & histologia , Baleias/anatomia & histologia , Arcada Osseodentária/anatomia & histologiaRESUMO
A crucial step in the evolution of Euarthropoda (chelicerates, myriapods, pancrustaceans) was the transition between fossil groups that possessed frontal appendages innervated by the first segment of the brain (protocerebrum), and living groups with a protocerebral labrum and paired appendages innervated by the second brain segment (deutocerebrum). Appendage homologies between the groups are controversial. Here we describe two specimens of opabiniid-like euarthropods, each bearing an anterior proboscis (a fused protocerebral appendage), from the Middle Ordovician Castle Bank Biota, Wales, UK. Phylogenetic analyses support a paraphyletic grade of stem-group euarthropods with fused protocerebral appendages and a posterior-facing mouth, as in the iconic Cambrian panarthropod Opabinia. These results suggest that the labrum may have reduced from an already-fused proboscis, rather than a pair of arthropodized appendages. If some shared features between the Castle Bank specimens and radiodonts are considered convergent rather than homologous, phylogenetic analyses retrieve them as opabiniids, substantially extending the geographic and temporal range of Opabiniidae.
Assuntos
Artrópodes , Evolução Biológica , Animais , Filogenia , Fósseis , Artrópodes/genética , Cabeça , Boca/anatomia & histologiaRESUMO
The flat bugs, Aradidae, have exceptionally long piercing-sucking stylets coiled up at rest in the anterior part of the head. Previous studies suggested that the majority of aradids can be divided into two groups by the direction of stylet coiling, clockwise or anticlockwise. Detailed reconstruction of the head skeleton and musculature from series of polished sections, examined in SEM, of epon-embedded specimens of three species has shown that these groups represent two disparate modifications of the head groundplan. In Aradus betulae (L.), the stylet coil is accommodated inside the greatly enlarged anteclypeus within an expansible membranous diverticulum of its epipharyngeal cuticle. In contrast, in Isodermus planus Erichson and Carventus brachypterus Kormilev, the coil lies freely underneath the anteclypeus between the extended maxillary lobes (in I. planus fused with the extended gular lobe). The intraclypeal coils occur in the subfamilies Aradinae, Calisiinae, and Chinamyersiinae and the subclypeal coils in Isoderminae, Carventinae, Mezirinae, Aneurinae, Prosympiestinae, and possibly in the closely related family Termitaphididae. Each method of stylet coiling is associated with a suite of divergently specialized structural traits, suggesting that the two groups have independently evolved from ancestors endowed with regular stylets. Functional mechanics of the coiled stylet bundles are discussed.
Assuntos
Heterópteros , Animais , Hemípteros , Heterópteros/anatomia & histologia , Heterópteros/classificação , Boca/anatomia & histologia , Especificidade da EspécieRESUMO
Morphology, distribution and function of the sensilla associated with mouthparts of female mosquito, Culex pipiens (Diptera: Culicidae) were studied by using the scanning electron microscope. The female mosquito mouthpart is a piercing and sucking type and carrying many sensory organs which plays major role in host seeking, and oviposition behaviour of mosquitoes. Six types of mouthpart sensilla have been identified and described, Sensilla trichoidea, chaetica, basiconica, Capitate peg, campaniformia and squamiformia. Females mosquito were irradiated as pupae with 20, 40 and 80 Gy of gamma radiation to investigate their effect on mouthparts sensilla. Dose of 20 Gy had slight effect on the different types of the sensilla as compared with the control. Features of malformation observed in the maxillary palp segments at this radiation dose include falling of some scales (sensilla squamiformia) at certain parts of the 1st segment leaving vacuoles. At 40 Gy, the maxillary palp segments were liquefied in some areas leaving undistinguished shape. At the highest dose 80 Gy, the tip of labial palps had many tears and showed were most affected, especially, at the trichoid, basiconic and chateica sensilla. All these malformations may lead the mosquitoes to not reaching the host, impeding their ability to transmit diseases or killing the mosquitoes, and this is the main objective of this study.
Assuntos
Culex , Culicidae , Dípteros , Animais , Feminino , Sensilas , Raios gama/efeitos adversos , Boca/anatomia & histologia , Microscopia Eletrônica de VarreduraRESUMO
This work aimed to evaluate the relative inhalation parameters that affect the deposition of inhaled aerosols, including mouth-throat morphology, airflow rate, and initial condition of emitted particles. In vitro experiments were conducted using the US Pharmacopeia (USP) throat and a realistic mouth-throat (RMT) with Handihaler®. Then, in silico study of the gas-solid flow was performed by computational fluid dynamics and discrete phase method. Results indicated that aerosol deposition in RMT was higher compared to that in USP throat at an airflow rate of 30 L/min, with 33.16 ± 7.84% and 21.11 ± 7.1% lung deposition in USP throat and RMT models, respectively, which showed a better correlation with in vivo data from the literature. Increasing airflow rate resulted in better drug aerosolization, while the fine particle dose trend ascended before declining, with the peak value obtained at a flow rate of 40 L/min. Overall, the effect of geometrical variation was more significant. Additionally, in silico results demonstrated clearly that the initial conditions of the emitted particles from inhalers affected the subsequent deposition. Larger momentum possessed by the central aerosol jet entering the mouth directly led to stronger impaction, which resulted in the deposition in the front region of mouth-throat models. This study is beneficial to develop an in silico method to understand the underlying mechanisms of in vivo mouth-throat deposition.
Assuntos
Inaladores de Pó Seco , Faringe , Inaladores de Pó Seco/métodos , Faringe/anatomia & histologia , Desenho de Equipamento , Administração por Inalação , Aerossóis , Pulmão , Boca/anatomia & histologia , Tamanho da PartículaRESUMO
The structure and functional morphology of the mouthparts were investigated in adult hangingfly Bicaubittacus appendiculatus (Esben-Petersen, 1927) by scanning electron microscopy and histological serial sections. The mandibulate mouthparts consist of a labrum-epipharynx, paired mandibles and maxillae, and unpaired labium and hypopharynx. The labrum is elongated and tapered toward the apex. The epipharynx is furnished with numerous sensilla. The mandibles are sword-shaped, with an outer sharp tooth curved mesad and an inner blunt corner. The basal region of each mandible processes a conical projection. The maxillae are well-developed, each consisting of a sclerotized cardo, an elongated stipes, which bears an inner lacinia, an outer galea, and laterally a five-segmented maxillary palp. The labium is formed by a postmentum, a prementum and a pair of two-segmented labial palps. The hypopharynx is concave inward on the anterior side, with numerous microtrichia on the posterior surface. Seven types of sensilla were found on the mouthparts: sensilla basiconica on the epipharynx, and maxillary and labial palps; sensilla chaetica on the epipharynx; sensilla palmata, sensilla placoidea and sensilla trichodea on the epipharynx and maxillary palp; sensilla campaniformia and hair plates on the basal joints of palps. The sensillar function and the feeding mechanism of mouthparts in bittacids are briefly discussed.
Assuntos
Holometábolos , Boca , Animais , Maxila , Microscopia Eletrônica de Varredura , Boca/anatomia & histologia , SensilasRESUMO
Aim: This study aimed to evaluate the correlation between vertical dimension of occlusion (VDO) and various facial measurements in a sample of Sudanese adults. Material and Methods: A total of 113 dental students (33 males and 80 females) with a mean age of 21.7±1.26 years were enrolled in this study. Different facial measurements including (Eye-Mouth, Eye-Eye, Eye-Ear, and Ear Height) were compared with two different measurements of VDO: N-Gn (from the tip of the nose to the tip of the chin), and Sn-Me (from the base of the nose to the bottom of the chin). Pearson's correlation coefficient test was utilized for the correlation between the measured parameters. A p-value of less than 0.05 was considered significant for all analyses. Results: A significant positive correlation was shown between all measured facial distances and both measured VDO distances. Though, the strongest correlation was seen for the eye-mouth distance (r= 0.725, p<0.001), while the weakest was for ear height (r= 0.254, p= 0.007). A paired t-test revealed a significant longer N-Gn distance than Sn-Me distance. Also, it has been shown that there were no significant differences between right and left sides of the face. Conclusion: The distance measured from the outer canthus of the eye to the angle of the mouth can be used to predict Subnasale-Menton (Sn-Me) distance.
Objetivo: Este estudio tuvo como objetivo evaluar la correlación entre dimensión vertical oclusal (DVO) y varias medidas faciales en una muestra de adultos sudaneses. Material y Métodos: Un total de 113 estudiantes de odontología (33 hombres y 80 mujeres) con una edad media de 21,7 ± 1,26 años se inscribieron en este estudio. Se compararon diferentes medidas faciales que incluyen (ojo- boca, ojo-ojo, ojo-oído y altura de la oreja) con dos medidas diferentes de DVO: N-Gn (desde la punta de la nariz hasta la punta del mentón) y Sn -Yo (desde la base de la nariz hasta la parte inferior del mentón). Se utilizó la prueba del coeficiente de correlación de Pearson para la correlación entre los parámetros medidos. Un valor de p inferior a 0,05 se consideró significativo para todos los análisis. Resultados: Se mostró una correlación positiva significativa entre todas las distancias faciales medidas y ambas distancias DVO medidas. Sin embargo, la correlación más fuerte se observó para la distancia ojo-boca (r=0,725, p<0,001), mientras que la más débil fue para la altura de las orejas (r=0,254, p=0,007). Una prueba de t pareada reveló una distancia N-Gn significativamente más larga que la distancia subnasal-mentón. Además, se ha demostrado que no hubo diferencias significativas entre los lados derecho e izquierdo de la cara. Conclusión: La distancia medida desde el canto externo del ojo hasta el ángulo de la boca puede utilizarse para predecir la distancia subnasal-mentón.
Assuntos
Humanos , Masculino , Feminino , Dimensão Vertical , Face/anatomia & histologia , Prostodontia , Sudão/epidemiologia , Antropometria , Nariz/anatomia & histologia , Queixo/anatomia & histologia , Oclusão Dentária , Olho/anatomia & histologia , Desenvolvimento Maxilofacial , Boca/anatomia & histologiaRESUMO
Behavioral laterality-typically represented by human handedness-is widely observed among animals. However, how laterality is acquired during development remains largely unknown. Here, we examined the effect of behavioral experience on the acquisition of lateralized predation at different developmental stages of the scale-eating cichlid fish Perissodus microlepis. Naïve juvenile fish without previous scale-eating experience showed motivated attacks on prey goldfish and an innate attack side preference. Following short-term predation experience, naïve juveniles learned a pronounced lateralized attack using their slightly skewed mouth morphology, and improved the velocity and amplitude of body flexion to succeed in foraging scales during dominant-side attack. Naïve young fish, however, did not improve the dynamics of flexion movement, but progressively developed attack side preference and speed to approach the prey through predation experience. Thus, the cichlid learns different aspects of predation behavior at different developmental stages. In contrast, naïve adults lost the inherent laterality, and they neither developed the lateralized motions nor increased their success rate of predation, indicating that they missed appropriate learning opportunities for scale-eating skills. Therefore, we conclude that behavioral laterality of the cichlid fish requires the integration of genetic basis and behavioral experiences during early developmental stages, immediately after they start scale-eating.
Assuntos
Comportamento Animal , Ciclídeos/crescimento & desenvolvimento , Ciclídeos/fisiologia , Comportamento Alimentar , Lateralidade Funcional , Aprendizagem , Comportamento Predatório , Animais , Boca/anatomia & histologia , Boca/fisiologiaRESUMO
The influences of the profiles and cross-sectional areas of glottal aperture on the upper respiratory airway are investigated using an idealized cast-based mouth-throat model and three dimensional computational fluid dynamics (CFD). The open source CFD code OpenFOAM is employed. The transient flows are modeled using the very-large eddy simulation with the Smagorinsky sub-grid scale (SGS) model. Five different shapes of glottis are considered, including circular glottis with 100 %, 75 % and 50 % cross-sectional area and elliptic glottis with 75 % and 50 % cross-sectional area. Both instantaneous and averaged flow fields are analyzed. It is found that the variations of glottis have great impacts on the properties of downstream flow fields such as the secondary flow, laryngeal jet, recirculation zone, turbulent kinetic energy, and vortex. Evident impacts are observed in the region within 6 tracheal diameters downstream of the glottis. The profile of the glottis has more impacts on the laryngeal shape, while the cross-sectional area has more impacts on velocity of the laryngeal jet and turbulent intensity. It is concluded that both the glottal areas and profiles are critical for an idealized geometrical mouth-throat model.
Assuntos
Glote/anatomia & histologia , Hidrodinâmica , Modelos Biológicos , Boca/anatomia & histologia , Faringe/anatomia & histologia , Ventilação Pulmonar/fisiologia , Traqueia/anatomia & histologia , Simulação por Computador , HumanosRESUMO
RESUMEN: El pudú (Pudu puda), pertenece al orden Artiodactyla y a la familia Cervidae, corresponde al segundo cérvido más pequeño del mundo y es endémico de Chile y Argentina. Son herbívoros que se alimentan de hojas jóvenes y brotes de algunos árboles, arbustos, hierbas, frutos y flores. Esta especie está catalogada en estado Vulnerable, por lo que se prohíbe su caza y captura, esto debido a que su población ha disminuido sustancialmente a causa de la pérdida y fragmentación de la vegetación nativa, los incendios forestales, ataques de perros asilvestrados y caza furtiva. Existe escasa información científica anatómica de esta especie, y más aún referente a su morfología digestiva, por lo que se requieren estudios que aporten información específica de este cérvido. Se utilizaron dos cadáveres de pudú hembras adultas, los cuales fueron donados por el Servicio Agrícola y Ganadero (SAG) de Talca, Región del Maule, Chile. Dentro de los resultados, podemos indicar que la cavidad oral, glándulas salivares y esófago se asemejan a otros rumiantes domésticos, como también existen semejanzas con el venado de campo, sin embargo, existen diferencias como la forma y desarrollo de la glándula parótida; el conducto parotídeo pasa ventral al músculo masetero y se abre en una papila a nivel del tercer premolar superior; la glándula mandibular se divide en tres lobos; la glándula sublingual solo posee porción polistomática, las glándulas bucales dorsales poseen un menor tamaño que las bucales ventrales, la glándula bucal ventral es alargada y de forma compacta y se observa la presencia de una redondeada glándula bucal intermedia, poseen 11 crestas palatinas por lado en el paladar duro y además la papila incisiva se encuentra rodeando al pulvino dental. Esta información es relevante y corresponde a un aporte al conocimiento específico de esta especie, la cual es endémica, vulnerable y protegida.
SUMMARY: The pudu (Pudu puda), belongs to the Artiodactyla order and the Cervidae family, corresponding to the second smallest deer in the world and is endemic to Chile and Argentina. They are herbivores that feed on young leaves and shoots of certain trees, shrubs, herbs, fruits, and flowers. The status of is species is classified as Vulnerable; therefore, its hunting and capture is prohibited, this because its population has decreased substantially due to the loss and fragmentation of native vegetation, forest fires, attacks by feral dogs and poaching. There is little scientific anatomical information available on this species, and even more so regarding its digestive morphology, which is why studies are required to provide specific information on this deer. Two adult female pudu specimens were used, which were donated by the Agricultural and Livestock Service (SAG) of Talca, Maule Region, Chile. Among the results, we can indicate that the oral cavity, salivary glands and esophagus resemble other domestic ruminants; there are also similarities with the field deer, however, there are differences such as the shape and development of the parotid gland; the parotid duct passes ventral to the masseter muscle and opens into a papilla at the level of the upper third premolar; the mandibular gland is divided into three wolves; the sublingual gland only has a polystomatic portion, the dorsal buccal glands are smaller than the ventral buccal glands, the ventral buccal gland is elongated and compact and the presence of a rounded intermediate buccal gland is observed, it has 11 palatal ridges per side in the hard palate and also the incisive papilla is found surrounding the dental pulvino. This information is relevant and corresponds to a report on the specific knowledge of this species, which is endemic, vulnerable, and protected.
Assuntos
Animais , Glândulas Salivares/anatomia & histologia , Cervos , Esôfago/anatomia & histologia , Boca/anatomia & histologiaRESUMO
Vulnerability of animals immediately after hatching may induce plasticity in early ontology that becomes important for subsequent survival and growth. Ezo salamanders (Hynobius retardatus) are amphibians inhabiting ponds in Hokkaido, Japan where ezo brown frogs (Rana pirica) spawn on occasion. The salamander larvae must achieve sufficient size in order to successfully capture frog tadpoles, and we examined whether the presence of tadpoles causes development of greater body and/or gape size in newly hatched salamander larvae, which will in turn result in advantageous future prey-predator interactions. To examine this hypothesis, we conducted three laboratory experiments to demonstrate the phenotypic plasticity of salamander hatchlings in response to the presence or absence of frog tadpoles and to screen the type of signals involved in the expression of the phenotypic plasticity. First, salamander hatchlings were reared alone or with tadpoles, and the growth and morphological traits of the hatchlings were compared. The results showed that hatchling larvae grew faster with a more developed gape in the presence of tadpoles. Next, to identify the type of signals inducing this plasticity, two separate experiments with manipulated chemical and visual signals from tadpoles were conducted. The findings showed that faster growth and a more developed gape were induced by chemical but not visual signals. This plasticity may be an adaptive strategy because it increases the likelihood of preying on tadpoles in future prey-predator interactions.
Assuntos
Adaptação Fisiológica , Urodelos/crescimento & desenvolvimento , Animais , Sinais (Psicologia) , Larva/crescimento & desenvolvimento , Larva/fisiologia , Boca/anatomia & histologia , Boca/crescimento & desenvolvimento , Comportamento Predatório , Ranidae , Urodelos/fisiologia , Água/químicaRESUMO
Evolutionary constraints may significantly bias phenotypic change, while "breaking" from such constraints can lead to expanded ecological opportunity. Ray-finned fishes have broken functional constraints by developing two jaws (oral-pharyngeal), decoupling prey capture (oral jaw) from processing (pharyngeal jaw). It is hypothesized that the oral and pharyngeal jaws represent independent evolutionary modules and this facilitated diversification in feeding architectures. Here we test this hypothesis in African cichlids. Contrary to our expectation, we find integration between jaws at multiple evolutionary levels. Next, we document integration at the genetic level, and identify a candidate gene, smad7, within a pleiotropic locus for oral and pharyngeal jaw shape that exhibits correlated expression between the two tissues. Collectively, our data show that African cichlid evolutionary success has occurred within the context of a coupled jaw system, an attribute that may be driving adaptive evolution in this iconic group by facilitating rapid shifts between foraging habitats, providing an advantage in a stochastic environment such as the East African Rift-Valley.
Assuntos
Evolução Biológica , Ciclídeos/anatomia & histologia , Comportamento Alimentar/fisiologia , Arcada Osseodentária/anatomia & histologia , Boca/anatomia & histologia , Faringe/anatomia & histologia , Animais , Ciclídeos/genética , Ecossistema , Feminino , Escore Lod , Masculino , Locos de Características Quantitativas/genética , Análise de Sequência de DNA/métodos , Microtomografia por Raio-XRESUMO
The biomechanics underlying the predatory strike of dragonfly larvae is not yet understood. Dragonfly larvae are aquatic ambush predators, capturing their prey with a strongly modified extensible mouthpart. The current theory of hydraulic pressure being the driving force of the predatory strike can be refuted by our manipulation experiments and reinterpretation of former studies. Here, we report evidence for an independently loaded synchronized dual-catapult system. To power the ballistic movement of a single specialized mouthpart, two independently loaded springs simultaneously release and actuate two separate joints in a kinematic chain. Energy for the movement is stored by straining an elastic structure at each joint and, possibly, the surrounding cuticle, which is preloaded by muscle contraction. As a proof of concept, we developed a bioinspired robotic model resembling the morphology and functional principle of the extensible mouthpart. Understanding the biomechanics of the independently loaded synchronized dual-catapult system found in dragonfly larvae can be used to control the extension direction and, thereby, thrust vector of a power-modulated robotic system.