Multi-Encapsulation Combination of O/W/O Emulsions with Polyurea Microcapsules for Controlled Release and Safe Application of Dimethyl Disulfide.

Dimethyl disulfide (DMDS), a promising alternative fumigant, has been highly desirable for excellent management of soil pests and diseases. However, high volatility and moderate toxicity of this sulfide limit its application. To address these issues, a novel controlled release formulation of DMDS was proposed employing multiple emulsions and polyurea microcapsules (DMDS@MEs-MCs). The successful combination of the two technologies was revealed by confocal laser scanning microscopy, scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared. According to the multiple encapsulation structure, the encapsulation efficiency decreased by only 3.13% after thermal storage, compared with a 15.21% decrease of microcapsules made with only a monolayer film. DMDS@MEs-MCs could effectively control the release of active ingredient, which increased applicator and environmental safety during application. Moreover, it could be facilely used by spraying and drip irrigation instead of a special fumigation device. The innovative formulation exhibited better control efficacy on soil pathogens (Fusarium spp. and Phytophthora spp.) and root-knot nematodes (Meloidogyne spp.) than DMDS technical concentration (DMDS TC). In addition, it did not inhibit seed germination after 10 days when the plastic film was removed from the fumigated soil. This method appears to be of broad interest for the development of safe and handy fumigant application.

A Study of the Cytotoxic Effect of Microcapsules and Their Constituent Polymers on Macrophages and Tumor Cells.

We studied the effect of different concentrations of polyelectrolytes poly(allylamine hydrochloride) (PAH) and polystyrene sulfonate (PSS) as well as the effects of microcapsules coated with these polymers on survival of Ehrlich ascites carcinoma cells and mouse peritoneal macrophages and on ROS production by phagocytes. PAH reduced viability of Ehrlich ascites carcinoma in a concentration-dependent manner (LD50=12-15 µg/ml). This effect was presumably determined by its ability to bind phosphates, thereby depleting the culture medium. At the same time, PAH did not affect the viability of macrophages. PSS produced no cytotoxic effect on the examined cells. Polyelectrolyte capsules with the shell architectonics (PAH/PSS)3 and (PAH/PSS)3PAH in the examined concentration range had no effect on the viability of macrophages and tumor cells. PAH microcapsules with positively charged surface much more rapidly and more intensively activated macrophages. The chemiluminescence response directly depended on the amount of capsules in the solution.

Reducing the toxicity of amphotericin B by encapsulation using methoxy poly(ethylene glycol)-b-poly(l-glutamic acid-co-l-phenylalanine).

Amphotericin B (AmB) is an antifungal drug used for serious fungal infections and leishmaniosis. However, its clinical application is limited because of its high toxicity. To resolve this problem, herein we loaded AmB into methoxy poly(ethylene glycol)-b-poly(l-glutamic acid-co-l-phenylalanine) (mPEG-b-P(Glu-co-Phe)) nanoparticles (l-AmB) via electrostatic, hydrophobic and π-π interactions. The l-AmB has excellent stability both in PBS and in plasma and shows a remarkably reduced hemolysis (17.1 ± 1.5%, 6 h) compared to the free AmB (94.2 ± 5.3%, 6 h). The nephrotoxicity of l-AmB is significantly lower than that of free AmB. The maximum tolerance dose (MTD) of l-AmB is 3.0 mg kg-1, which is 3.75 fold that of free AmB (MTD = 0.8 mg kg-1). The antimicrobial activity of the conjugate was retained in vivo, with l-AmB proving to be a more protective treatment for Aspergillus fumigatus infections in mice than AmB alone. These indicate that l-AmB is a formulation of AmB with low side effects.

Injectable alginate-microencapsulated canine adipose tissue-derived mesenchymal stem cells for enhanced viable cell retention.

The purpose of this study was to establish an optimized protocol for the production of alginate-encapsulated canine adipose-derived mesenchymal stem cells (cASCs) and evaluate their suitability for clinical use, including viability, proliferation and in vivo cell retention. Alginate microbeads were formed by vibrational technology and the production of injectable microbeads was performed using various parameters with standard methodology. Microbead toxicity was tested in an animal model. Encapsulated cASCs were evaluated for viability and proliferation in vitro. HEK-293 cells, with or without microencapsulation, were injected into the subcutaneous tissue of mice and were tracked using in vivo bioluminescent imaging to evaluate the retention of transplanted cells. The optimized injectable microbeads were of uniform size and approximately 250 µm in diameter. There was no strong evidence of in vivo toxicity for the alginate beads. The cells remained viable after encapsulation, and there was evidence of in vitro proliferation within the microcapsules. In vivo bioluminescent imaging showed that alginate encapsulation improved the retention of transplanted cells and the encapsulated cells remained viable in vivo for 7 days. Encapsulation enhances the retention of viable cells in vivo and might represent a potential strategy to increase the therapeutic potency and efficacy of stem cells.

The development of non-toxic ionic-crosslinked chitosan-based microspheres as carriers for the controlled release of silk sericin.

Silk sericin is recently shown to possess various biological activities for biomedical applications. While various sericin carriers were developed for drug delivery system, very few researches considered sericin as a bioactive molecule itself. In this study, sericin incorporated in the chitosan-based microspheres was introduced as a bioactive molecule and bioactive carrier at the same time. The chitosan/sericin (CH/SS) microspheres at different composition (80/20, 70/30, 60/40, and 50/50) were successfully fabricated using anhydroustri-polyphosphate (TPP) as a polyanionic crosslinker. The microspheres with an average size of 1-4 µm and narrow size distribution were obtained. From FT-IR spectra, the presence of both chitosan and sericin in the microspheres confirmed the occurrence of ionic interaction that crosslink them within the microspheres. We also found that the CH/SS microspheres prepared at 50/50 could encapsulate sericin at the highest percentage (37.28%) and release sericin in the most sustained behavior, possibly due to the strong ionic interaction of the positively charged chitosan and the negatively charged sericin. On the other hand, the composition of CH/SS had no effect on the degradation rate of microspheres. All microspheres continuously degraded and remained around 20% after 14 days of enzymatic degradation. This explained that the ionic crosslinkings between chitosan and sericin could be demolished by the enzyme and hydrolysis. Furthermore, we have verified that all CH/SS microspheres at any concentrations showed non-toxicity to L929 mouse fibroblast cells. Therefore, we suggested that the non-toxic ionic-crosslinked CH/SS microspheres could be incorporated in wound dressing material to achieve the sustained release of sericin for accelerated wound healing.

Self-assembling bubble carriers for oral protein delivery.

Successful oral delivery of therapeutic proteins such as insulin can greatly improve the quality of life of patients. This study develops a bubble carrier system by loading diethylene triamine pentaacetic acid (DTPA) dianhydride, a foaming agent (sodium bicarbonate; SBC), a surfactant (sodium dodecyl sulfate; SDS), and a protein drug (insulin) in an enteric-coated gelatin capsule. Following oral administration to diabetic rats, the intestinal fluid that has passed through the gelatin capsule saturates the mixture; concomitantly, DTPA dianhydride produces an acidic environment, while SBC decomposes to form CO2 bubbles at acidic pH. The gas bubbles grow among the surfactant molecules (SDS) owing to the expansion of the generated CO2. The walls of the CO2 bubbles consist of a self-assembled film of water that is in nanoscale and may serve as a colloidal carrier to transport insulin and DTPA. The grown gas bubbles continue to expand until they bump into the wall and burst, releasing their transported insulin, DTPA, and SDS into the mucosal layer. The released DTPA and SDS function as protease inhibitors to protect the insulin molecules as well as absorption enhancers to augment their epithelial permeability and eventual absorption into systemic circulation, exerting their hypoglycemic effects.

Protein capsules with cross-linked, semipermeable, and enzyme-degradable surface barriers for controlled release.

This paper describes a method for fabricating protein-based capsules with semipermeable and enzyme-degradable surface barriers. It involves the use of a simple fluidic device to generate water-in-oil emulsion droplets, followed by cross-linking of proteins at the water-oil interface to generate a semipermeable surface barrier. The capsules can be readily fabricated with uniform and controllable sizes and, more importantly, show selective permeability toward molecules with different molecular weights: small molecules like fluorescein sodium salt can freely diffuse through the surface barrier while macromolecules such as proteins can not. The proteins, however, can be released by digesting the surface barrier with an enzyme such as pepsin. Taken together, the capsules hold great potential for applications in controlled release, in particular, for the delivery of protein drugs.

In vitro and transdermal penetration of PHBV micro/nanoparticles.

The purpose of this study was to develop micro and nano sized drug carriers from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and study the cell and skin penetration of these particles. PHBV micro/nanospheres were prepared by o/w emulsion method and were stained with a fluorescent dye, Nile Red. The particles were fractionated by centrifugation to produce different sized populations. Topography was studied by SEM and average particle size and its distribution were determined with particle sizer. Cell viability assay (MTT) was carried out using L929 fibroblastic cell line, and particle penetration into the cells were studied. Transdermal permeation of PHBV micro/nanospheres and tissue reaction were studied using a BALB/c mouse model. Skin response was evaluated histologically and amount of PHBV in skin was determined by gas chromatography-mass spectrometry. The average diameters of the PHBV micro/nanosphere batches were found to be 1.9 µm, 426 and 166 nm. Polydispersity indices showed that the size distribution of micro sized particles was broader than the smaller ones. In vitro studies showed that the cells had a normal growth trend. MTT showed no signs of particle toxicity. The 426 and 166 nm sized PHBV spheres were seen to penetrate the cell membrane. The histological sections revealed no adverse effects. In view of this data nano and micro sized PHBV particles appeared to have potential to serve as topical and transdermal drug delivery carriers for use on aged or damaged skin or in cases of skin diseases such as psoriasis, and may even be used in gene transfer to cells.

Bioorthogonal layer-by-layer encapsulation of pancreatic islets via hyperbranched polymers.

Encapsulation of viable tissues via layer-by-layer polymer assembly provides a versatile platform for cell surface engineering, with nanoscale control over the capsule properties. Herein, we report the development of a hyperbranched polymer-based, ultrathin capsule architecture expressing bioorthogonal functionality and tailored physiochemical properties. Random carbodiimide-based condensation of 3,5-dicarboxyphenyl glycineamide on alginate yielded a highly branched polysaccharide with multiple, spatially restricted, and readily functionalizable terminal carboxylate moieties. Poly(ethylene glycol) (PEG) was utilized to link azido end groups to the structured alginate. Together with a phosphine-functionalized poly(amidoamine) dendrimer, nanoscale layer-by-layer coatings, covalently stabilized via Staudinger ligation, were assembled onto solid surfaces and pancreatic islets. The effects of electrostatic and/or bioorthogonal covalent interlayer interactions on the resulting coating efficiency and stability, as well as pancreatic islet viability and function, were studied. These hyperbranched polymers provide a flexible platform for the formation of covalently stabilized, ultrathin coatings on viable cells and tissues. In addition, the hyperbranched nature of the polymers presents a highly functionalized surface capable of bioorthogonal conjugation of additional bioactive or labeling motifs.

One-step assembly of coordination complexes for versatile film and particle engineering.

The development of facile and versatile strategies for thin-film and particle engineering is of immense scientific interest. However, few methods can conformally coat substrates of different composition, size, shape, and structure. We report the one-step coating of various interfaces using coordination complexes of natural polyphenols and Fe(III) ions. Film formation is initiated by the adsorption of the polyphenol and directed by pH-dependent, multivalent coordination bonding. Aqueous deposition is performed on a range of planar as well as inorganic, organic, and biological particle templates, demonstrating an extremely rapid technique for producing structurally diverse, thin films and capsules that can disassemble. The ease, low cost, and scalability of the assembly process, combined with pH responsiveness and negligible cytotoxicity, makes these films potential candidates for biomedical and environmental applications.

Fabrication and characterization of monodisperse PLGA-alginate core-shell microspheres with monodisperse size and homogeneous shells for controlled drug release.

Monodisperse PLGA-alginate core-shell microspheres with controlled size and homogeneous shells were first fabricated using capillary microfluidic devices for the purpose of controlling drug release kinetics. Sizes of PLGA cores were readily controlled by the geometries of microfluidic devices and the fluid flow rates. PLGA microspheres with sizes ranging from 15 to 50µm were fabricated to investigate the influence of the core size on the release kinetics. Rifampicin was loaded into both monodisperse PLGA microspheres and PLGA-alginate core-shell microspheres as a model drug for the release kinetics studies. The in vitro release of rifampicin showed that the PLGA core of all sizes exhibited sigmoid release patterns, although smaller PLGA cores had a higher release rate and a shorter lag phase. The shell could modulate the drug release kinetics as a buffer layer and a near-zero-order release pattern was observed when the drug release rate of the PLGA core was high enough. The biocompatibility of PLGA-alginate core-shell microspheres was assessed by MTT assay on L929 mouse fibroblasts cell line and no obvious cytotoxicity was found. This technique provides a convenient method to control the drug release kinetics of the PLGA microsphere by delicately controlling the microstructures. The obtained monodisperse PLGA-alginate core-shell microspheres with monodisperse size and homogeneous shells could be a promising device for controlled drug release.

Co-delivery of adipose-derived stem cells and growth factor-loaded microspheres in RGD-grafted N-methacrylate glycol chitosan gels for focal chondral repair.

The coencapsulation of growth factor-loaded microspheres with adipose-derived stem cells (ASCs) within a hydrogel matrix was studied as a potential means to enhance ASC chondrogenesis in the development of a cell-based therapeutic strategy for the regeneration of partial thickness chondral defects. A photopolymerizable N-methacrylate glycol chitosan (MGC) was employed to form an in situ gel used to encapsulate microspheres loaded with bone morphogenetic protein 6 (BMP-6) and transforming growth factor-ß3 (TGF-ß3) with human ASCs. ASC viability and retention were enhanced when the Young's modulus of the MGC ranged between 225 and 380 kPa. Grafting an RGD-containing peptide onto the MGC backbone (RGD-MGC) improved ASC viability within the gels, remaining at greater than 90% over 14 days in culture. The effects of BMP-6 and TGF-ß3 released from the polymer microspheres on ASC chondrogenesis were assessed, and the level of differentiation was compared to ASCs in control gels containing nongrowth factor-loaded microspheres cultured with and without the growth factors supplied in the medium. There was enhanced expression of chondrogenic markers at earlier time points when the ASCs were induced with the sustained and local release of BMP-6 and TGF-ß3 from the microspheres. More specifically, the normalized glycosaminoglycan and collagen type II protein expression levels were significantly higher than in the controls. In addition, the ratio of collagen type II to type I was significantly higher in the microsphere delivery group and increased over time. End-point RT-PCR analysis supported that there was a more rapid induction and enhancement of ASC chondrogenesis in the controlled release group. Interestingly, in all of the assays, there was evidence of chondrogenic differentiation when the ASCs were cultured in the gels in the absence of growth factor stimulation. Overall, the co-delivery of growth-factor-loaded microspheres and ASCs in RGD-modified MGC gels successfully induced ASC chondrogenesis and is a promising strategy for cartilage repair.

Drug-loaded polyelectrolyte microcapsules for sustained targeting of cancer cells.

In this review we will overview novel nanotechnological nanocarrier systems for cancer therapy focusing on recent development in polyelectrolyte capsules for targeted delivery of antineoplastic drugs against cancer cells. Biodegradable polyelectrolyte microcapsules (PMCs) are supramolecular assemblies of particular interest for therapeutic purposes, as they can be enzymatically degraded into viable cells, under physiological conditions. Incorporation of small bioactive molecules into nano-to-microscale delivery systems may increase drug's bioavailability and therapeutic efficacy at single cell level giving desirable targeted therapy. Layer-by-layer (LbL) self-assembled PMCs are efficient microcarriers that maximize drug's exposure enhancing antitumor activity of neoplastic drug in cancer cells. They can be envisaged as novel multifunctional carriers for resistant or relapsed patients or for reducing dose escalation in clinical settings.

Layer-by-layer assembly of poly(L-glutamic acid)/chitosan microcapsules for high loading and sustained release of 5-fluorouracil.

Hollow polyelectrolyte microcapsules based on poly(l-glutamic acid) (PLGA) and chitosan (CS) with opposite charges were fabricated by layer-by-layer (LbL) assembly technique using melamine formaldehyde (MF) microparticles as sacrificial templates. The LbL assembly of polyelectrolytes and the resultant PLGA/CS microcapsules were characterized. A hydrophilic anticancer drug, 5-fluorouracil (5-FU), was chosen to investigate the loading and release properties of the microcapsules. The PLGA/CS microcapsules show high loading capacity of 5-FU under conditions of high drug concentration and salt adding. The high loading can be ascribed to spontaneous deposition of 5-FU induced by hydrogen bonding between 5-FU and PLGA/CS microcapsules. The PLGA/CS microcapsules show sustained release behavior. The release rate of 5-FU drastically slows down after loading in PLGA/CS microcapsules. The 5-FU release from PLGA/CS microcapsules can be best described using Ritger-Peppas or Baker-Londale models, indicating the diffusion mechanism of 5-FU release from the PLGA/CS microcapsules. In vitro cytotoxicity evaluation by the MTT assay shows good cell viability over the entire concentration range of PLGA/CS microcapsules. Therefore, the novel PLGA/CS microcapsules are expected to find application in drug delivery systems because of the properties of biodegradability, high loading, sustained release and cell compatibility.

Cosmetic textiles with biological benefits: gelatin microcapsules containing vitamin C.

In recent years, textile materials with special applications in the cosmetic field have been developed. A new sector of cosmetic textiles is opened up and several cosmetic textile products are currently available in the market. Microencapsulation technology is an effective technique to control the release properties of active ingredients that prolong the functionality of cosmetic textiles. This study discusses the development of cosmetic textiles and addresses microencapsulation technology with respect to its historical background, significant advantages, microencapsulation methods and recent applications in the textile industry. Gelatin microcapsules containing vitamin C were prepared using emulsion hardening technique. Both the optical microscopy and scanning electron microscopy demonstrated that the newly developed microcapsules were in the form of core-shell spheres with relatively smooth surface. The particle size of microcapsules ranged from 5.0 to 44.1 microm with the average particle size being 24.6 microm. The gelatin microcapsules were proved to be non-cytotoxic based on the research findings of the toxicity studies conducted on human liver and breast cell lines as well as primary bone marrow culture obtained from patient with non-malignant haematological disorder. The gelatin microcapsules were successfully grafted into textile materials for the development of cosmetic textiles.

Nanovesicles based on self-assembly of conformationally constrained aromatic residue containing amphiphilic dipeptides.

Peptide-based vesicular structures have been the focus of research in the past decade for their potential application as drug delivery agents. We here report the self-assembly of amphiphilic dipeptides containing conformation-constraining alpha,beta-dehydrophenylalanine into nanovesicles. The vesicles can encapsulate small drug molecules such as riboflavin and vitamin B(12), bioactive peptides, and small protein molecules. The nanovesicles are resistant to treatment of a nonspecific protease, proteinase K, and are stable at low concentrations of monovalent and divalent cations. The vesicles are effectively taken up by actively growing cells in culture and show no observable cytopathic effects. These peptide-based nanostructures can be considered as models for further development as delivery agents for different biomolecules.

The drug encapsulation efficiency, in vitro drug release, cellular uptake and cytotoxicity of paclitaxel-loaded poly(lactide)-tocopheryl polyethylene glycol succinate nanoparticles.

Paclitaxel is one of the most effective antineoplastic drugs. Its current clinical administration is formulated in Cremophor EL, which causes serious side effects. Nanoparticle (NP) technology may provide a solution for such poisonous adjuvant problems and promote a sustained chemotherapy, in which biodegradable polymers play a key role. Our group has successfully synthesized novel poly(lactide)-tocopheryl polyethylene glycol succinate (TPGS) (PLA-TPGS) copolymers of desired hydrophobic-hydrophilic balance for NP formulation of anticancer drugs. The present work is focused on effects of the PLA:TPGS composition ratio on drug encapsulation efficiency, in vitro drug release, in vitro cellular uptake and viability of the PLA-TPGS NP formulation of paclitaxel. The PLA-TPGS copolymers of various PLA:TPGS ratios were synthesized by the ring-opening polymerization method and characterized by GPC and (1)H NMR for their molecular structure. Paclitaxel-loaded PLA-TPGS NPs were prepared by a modified solvent extraction/evaporation method and characterized by laser light scattering for size and size distribution, scanning electron microscopy for surface morphology and zeta potential for surface charge. High performance liquid chromatography was used to measure the drug encapsulation efficiency and in vitro drug release profile. Cancer cell lines HT-29 and Caco-2 were used to image and measure the cellular uptake of fluorescent PLA-TPGS NPs. Cancer cell viability of the drug-loaded PLA-TPGS was measured by MTT assay. It was found that the PLA:TPGS composition ratio has little effects on the particle size and size distribution. However, the PLA-TPGS NPs of 89:11 PLA:TPGS ratio achieved the best effects on the drug encapsulation efficiency, the cellular uptake and the cancer cell mortality of the drug-loaded PLA-TPGS NPs. This research was also carried out in close comparison with the drug-loaded PLGA NPs.

Effect of solid lipid nanoparticles (SLN) on cytokine production and the viability of murine peritoneal macrophages.

The purpose of this study was to investigate possible immunomodulatory and cytotoxic effects of solid lipid nanoparticles (SLN) on murine peritoneal macrophages. Immunomodulatory effects of SLN composed of either a lipid- (glycerol-behenate) or a wax (cetylpalmitate) matrix stabilized by the surfactant Poloxamer 188 were analysed by detection of proinflammatory and down-regulatory cytokines in supernatants of thioglycollate-elicited peritoneal macrophages using enzyme-linked immunosorbent assay (ELISA). Cytotoxicity of SLN was assessed using the ITT test. Incubation of macrophages with either SLN at low concentrations did not increase production of interleukin (IL)-6, IL-12, and tumour necrosis factor (TNF)-alpha. At higher SLN concentrations, a concentration-dependent decrease in IL-6 secretion was observed compared to background production of IL-6 by untreated macrophages. IL-12 and TNF-alpha production was neither detected in supernatants of macrophages treated with SLN at any concentration nor in those of untreated cells. The decrease in IL-6 secretion was paralleled by concentration-dependent cytotoxicity of SLN on these cells. In contrast, incubation with polystyrene reference particles neither resulted in decreased IL-6 production nor in a loss of viability. SLN-treated macrophages were found to up-regulate their cytokine production following stimulation with Pansorbin, despite the concentration-dependent cytotoxicity induced by SLN. Down-regulatory effects on SLN-treated macrophages by IL-10 were not observed. In conclusion, incubation of SLN with murine peritoneal macrophages did not induce the production of proinflammatory and down-regulatory cytokines. At high concentrations of SLN, cytotoxic effects on these cells were observed. Cytotoxicity appears to be the main cause of decreased cytokine production by these cells.