Long-term haplodeficency of DSPP causes temporomandibular joint osteoarthritis in mice.

BACKGROUND: Extracellular matrix (ECM) protein malfunction or defect may lead to temporomandibular joint osteoarthritis (TMJ OA). Dentin sialophophoprotein (DSPP) is a mandibular condylar cartilage ECM protein, and its deletion impacted cell proliferation and other extracellular matrix alterations of postnatal condylar cartilage. However, it remains unclear if long-term loss of function of DSPP leads to TMJ OA. The study aimed to test the hypothesis that long-term haploinsufficiency of DSPP causes TMJ OA. MATERIALS AND METHODS: To determine whether Dspp+/- mice exhibit TMJ OA but no severe tooth defects, mandibles of wild-type (WT), Dspp+/-, and Dspp homozygous (Dspp-/-) mice were analyzed by Micro-computed tomography (micro-CT). To characterize the progression and possible mechanisms of osteoarthritic degeneration over time in Dspp+/- mice over time, condyles of Dspp+/- and WT mice were analyzed radiologically, histologically, and immunohistochemically. RESULTS: Micro-CT and histomorphometric analyses revealed that Dspp+/- and Dspp-/- mice had significantly lower subchondral bone mass, bone volume fraction, bone mineral density, and trabecular thickness compared to WT mice at 12 months. Interestingly, in contrast to Dspp-/- mice which exhibited tooth loss, Dspp+/- mice had minor tooth defects. RNA sequencing data showed that haplodeficency of DSPP affects the biological process of ossification and osteoclast differentiation. Additionally, histological analysis showed that Dspp+/- mice had condylar cartilage fissures, reduced cartilage thickness, decreased articular cell numbers and severe subchondral bone cavities, and with signs that were exaggerated with age. Radiographic data showed an increase in subchondral osteoporosis up to 18 months and osteophyte formation at 21 months. Moreover, Dspp+/- mice showed increased distribution of osteoclasts in the subchondral bone and increased expression of MMP2, IL-6, FN-1, and TLR4 in the mandibular condylar cartilage. CONCLUSIONS: Dspp+/- mice exhibit TMJ OA in a time-dependent manner, with lesions in the mandibular condyle attributed to hypomineralization of subchondral bone and breakdown of the mandibular condylar cartilage, accompanied by upregulation of inflammatory markers.

A study on volumetric change of mandibular condyles with osteoarthritis using cone-beam computed tomography.

This study aimed to quantitatively assess three-dimensional changes in the mandibular condyle with osteoarthritis using cone-beam computed tomography (CBCT). Pre- and post-treatment CBCT images of temporomandibular joints (TMJs) from 66 patients were used to assess longitudinal changes in condylar volume within individual patients using 3D slicer software. Total volume difference (dV), net increase (dV + , bone deposition), and net decrease (dV- , bone resorption) after treatment were analyzed based on clinical and radiological factors. Condyles with surface erosion at their first visit showed significantly decreased volume after treatment compared to condyles without erosion (p < 0.05). Amounts of bone resorption and deposition were higher in condyles with surface erosion (both p < 0.01). In patients with condylar erosion, the presence of joint pain was associated with a decrease in condylar volume and an increase in net resorption (both p < 0.01). When both joint pain and condylar erosion were present, patients with parafunctional habits showed reduced condylar volume after treatment (p < 0.05). Condylar volume change after treatment was negatively correlated with the duration of pain relief (R = - 0.501, p < 0.05). These results indicate that condylar erosion and TMJ pain could be significant variables affecting TMJ volume changes after treatment. Establishing appropriate treatment strategies is crucial for managing condylar erosion and TMJ pain.

Quantitative and qualitative condylar changes following stabilization splint therapy in patients with temporomandibular joint disorders with and without skeletal lateral mandibular asymmetry: a cone beam computed tomographic study.

BACKGROUND: Temporomandibular disorders (TMDs) encompass pain and dysfunction in the jaw, muscles, and adjacent structures. This study aimed to explore the quantitative (condylar position, morphology) and qualitative (bone mineral density (BMD)) therapeutic outcomes following a stabilization splint (S.S.) therapy in adult patients diagnosed with TMD (Arthralgia) with/without lateral mandibular asymmetry (MA) using cone beam computed tomography (CBCT). METHODS: In this retrospective clinical study, 60 adult TMD patients who received S.S. therapy were enrolled and allocated into the TMD group (TMDG) and TMD with MA group (TMD + MAG). The diagnosis was made according to the Diagnostic Criteria for TMD (DC/TMD) AXIS I. MA was measured from the mid-sagittal plane to the Menton point. CBCT was used to scan the temporomandibular joints pre- (T0) and post- (T1)-treatment for three-dimensional analysis. Intra- and intergroup statistical comparisons were performed using the Wilcoxon signed ranks and the Kruskal‒Wallis test. RESULTS: For quantitative comparisons, there was a statistically significant difference between T0 and T1 in the joint spaces of TMD + MAG (anterior, superior, posterior, and coronal lateral on the deviated side as well as in the superior, coronal medial joint space of the contralateral side). Morphologically, the deviated side had a narrower condylar width, reduced condylar height, and a steeper eminence angle. In contrast, the contralateral side tended to have a greater condylar length. For qualitative measurements, BMD also showed statistical significance between T0 and T1 in the majority of the condyle slopes (AS, SS, PS, and LS on the deviated side and in AS and MS on the contralateral side) of TMD + MAG. Additionally, only the AS and PS showed significance in TMDG. CONCLUSION: Multiple joint space widening (AJS and CMS) and narrowing (SJS, PJS, and CLS) could characterize the deviated side in TMD + MA. Factors like narrower condylar width, reduced condylar height, and steeper eminence angle on the deviated side can worsen TMD + MA. Proper alignment of the condyle-disc position is essential for optimal function and load distribution, potentially affecting bone mineral density (BMD). MA plays a prominent role in disturbing bone densities. S.S. therapy shows more evident outcomes in TMD + MAG (on the deviated side compared to the contralateral side) than the TMDG.

Investigation of the accuracy of dynamic condylar position: A model study.

OBJECTIVES: To evaluate dynamic condylar positions by integrating mandibular movement recording data and cone-beam computed tomography (CBCT) and to investigate its accuracy via dynamic model experiments. METHODS: A polyvinyl chloride skull model was utilized. A robot arm was used to operate the mandible to perform mouth opening, closing, protrusion, and lateral movements. A recording device, worn on the skull, was used to record the dynamic process and an optical position tracking (OPT) system was used to simultaneously trace the movements. A self-developed software module was used to evaluate the dynamic condylar position by integrating the dynamic tracing data and a virtual skull model derived from CBCT images. Errors were defined as differences between the dynamic coordinates of six landmarks around the condylar area derived from the software module (test) and OPT system (gold standard). RESULTS: The condylar position errors were 0.76 ± 0.31, 0.55 ± 0.15, and 0.68 ± 0.23 mm for mouth opening, bilateral, and protrusion movements, respectively. Furthermore, the errors for small, moderate, and large mouth opening movements were 0.62 ± 0.19, 0.69 ± 0.29, and 0.94 ± 0.31 mm, respectively. The errors for all movements, except for large mouth opening, were significantly less than 1 mm (P < 0.05). The error was not different from 1 mm in the large mouth opening movement (P > 0.05). CONCLUSIONS: Our developed method of achieving dynamic condylar position by integrating mandibular movement recording data and CBCT images is clinically reliable. CLINICAL SIGNIFICANCE: This study proved the reliability of evaluating dynamic condylar position using a commercial dynamic recording instrument and CBCT images.

Mandibular condyle volumes are associated with facial asymmetry in patients with cleft lip and palate: A retrospective cohort study.

This study compares condylar volumetric asymmetry and facial asymmetry in patients with cleft lip and/or palate (CLP) and controls. The mandibular condyle is important to facial growth, but its role in facial asymmetry for those with CLP has not been described. Condylar volumes and mandibular asymmetry were retrospectively calculated using Mimics Version 23.0 (Materialise, Leuven, Belgium) from patients with CLP undergoing computed tomography (CT) imaging and a cohort of controls. A total of 101 participants, 60 with CLP and 41 controls, had mean condylar volumetric asymmetry of 16.4 ± 17.4 % (CLP) and 6.0 ± 4.0 % (controls) (p = 0.0002). Patients with CLP who had clinically significant chin deviation (>4 mm) had more asymmetric condyles than those without significant chin deviation (p = 0.003). The chin deviated toward the smaller condyle in patients with facial asymmetry more often than in patients without facial asymmetry (81 % vs. 62 %, p = 0.033). While controls had some degree of condylar asymmetry, it tended to be milder and not associated with facial asymmetry. There is a greater degree of condylar volumetric asymmetry in patients with CLP compared to individuals in the general population. Clinically significant facial asymmetry in CLP is associated with a higher degree of condylar asymmetry, with the facial midline deviating toward the smaller condyle.

Diagnostic accuracy of bone SPECT and SPECT/CT imaging in the diagnosis of unilateral condylar hyperplasia: A systematic review and meta-analysis.

Imaging with bone scans plays an important role in the diagnostic path of patients with unilateral condylar hyperactivity or unilateral condylar hyperplasia (UCH). The aim of this study is to perform a systematic review of the diagnostic performance of the bone SPECT and SPECT/CT scan for the diagnosis of UCH. PubMed, SCOPUS and EMBASE were searched electronically to identify diagnostic accuracy studies that assessed the diagnostic value of bone SPECT and SPECT/CT for the diagnosis of UCH, Meta-analyses were performed with Metadisc 1.4 and 2.0. A total of 14 studies, with a total number of 887 patients, were included in the qualitative analysis and 11 studies qualified for meta-analyses. The pooled sensitivity and specificity for the SPECT scan were 0.814 (95 % CI: 0.639-0.915) and 0.774 (95 % CI: 0.655-0.861), for the SPECT/CT scan these were 0.818 (95 % CI: 0.749-0.874) and 0.901 (95 % CI: 0.840-0.945). The summary receiver operating characteristics of the SPECT scan showed an area under the curve of 0.847 (95 % CI: 0.722-0.972) and that of the SPECT/CT scan was 0.928 (95 % CI: 0.876-0.980). CONCLUSION: Both bone SPECT scan and SPECT/CT scan provide a high diagnostic accuracy for UCH. The added value of the SPECT/CT scan is questionable and given the potential disadvantages of the SPECT/CT scan, including the increased radiation dose and costs, the diagnostic modality of first choice in patients with UCH should be a SPECT scan.

Age and Gender-related Morphometric Assessment and Degenerative Changes of Temporomandibular Joint in Symptomatic Subjects and Controls using Cone Beam Computed Tomography (CBCT): A Comparative Analysis.

BACKGROUND: The temporomandibular joint diseases have been associated with various predisposing factors. Joint spaces, articular eminence height and inclination, and the shapes of the condylar and glenoid fossa have all been shown to vary in temporomandibular joint diseases (TMD) patients. Advanced imaging techniques like cone beam computed tomography (CBCT) have been employed to estimate these parameters. AIMS AND OBJECTIVES: The aim of the current study was to investigate the condylar morphology, condylar and glenoid fossa shapes, and assessment of joint spaces, such as anterior, posterior, superior, lateral, and medial spaces, through CBCT slices in coronal and sagittal planes and compare them between the control group and TMD group. MATERIALS AND METHODS: A cross-sectional study was planned where 80 joints in 40 patients were assessed for the above parameters; group I consisted of healthy patients, and group II included those with temporomandibular joint diseases (TMDs). The articular eminence height and inclination were assessed on the midsagittal section. The condylar changes and shapes of the glenoid fossa and condyles, as well as the joint spaces, were assessed on the selected coronal and sagittal sections. RESULTS: The condylar fossa had a triangular shape in the TMJ group and an oval shape in the control group. The results were highly significant (P = 0.000**). A highly significant difference in morphological parameters, such as AJS, PJS, SJS, MJS, LJS, articular eminence height, and inclination, was found between the two groups (P = 0.000**). The association of morphological parameters, such as AJS, PJS, SJS, MJS, LJS, and articular eminence height and inclination were compared with condylar and glenoid fossa shapes, where the association of superior joint space and articular eminence inclination was observed. A highly significant difference was noted between the two groups with regard to all the parameters with P=0.00*. CONCLUSION: The articular eminence inclination, as well as the superior joint space, were found to be associated with the glenoid and condyle fossa shapes in the TMJ group. These observations would, therefore, help in the early diagnosis of temporomandibular joint diseases.

The effect of tooth loss on the temporomandibular joint space: A CBCT study.

OBJECTIVE: The tooth loss has a significant impact on the positioning of the condyle in the glenoid fossa and joint spaces of the temporomandibular joint (TMJ). The aim of this study was to assess the association between tooth loss and TMJ spaces using cone beam computed tomography (CBCT) images. MATERIALS AND METHODS: This retrospective investigation involved the evaluation of CBCT images of the bilateral TMJs in a cohort of 111 individuals, comprising 68 males and 43 women. The dentition of the patients was categorized into three categories, including A (65.4%), B (19.1%), and C (16.4%), based on the Eichner index. Anterior, superior, and posterior joint spaces were then measured in sagittal views. The Kruskal-Wallis test and Mann-Whitney test were employed to identify significant differences among the three Eichner groups. RESULTS: The findings of the present study suggested that there was no statistically significant variation in the anterior joint space among different Eichner groups within the general population (p = .781). Nevertheless, the superior and posterior joint spaces exhibited statistically significant alterations, as indicated by p-values of .039 and .010, respectively. It was detected that condyles were positioned inferiorly and posteriorly in group C when compared to groups A and B. CONCLUSION: The present study indicated that greater loss of tooth-supporting zones is associated with posterior and inferior displacement of condyles. Understanding these relationships helps emphasize how crucial it is to replace missing teeth to enhance occlusion support and, in turn, stop the progression and further deterioration of temporomandibular disorders.

[Mandibular condyle localization in orthognathic surgery based on mandibular movement trajectory and its preliminary accuracy verification].

OBJECTIVE: To establish and assess the precision of pre-surgical condyle position planning using mandibular movement trajectory data for orthognathic surgery. METHODS: Skull data from large-field cone beam computed tomography (CBCT) and dental oral scan data were imported into IVSPlan 1.0.25 software for 3D reconstruction and fusion, creating 3D models of the maxilla and mandible. Trajectory data of mandibular movement were collected using a mandibular motion recorder, and the data were integrated with the jaw models within the software. Subsequently, three-dimensional trajectories of the condyle were obtained through matrix transformations, rendering them visually accessible. A senior oral and maxillofacial surgeon with experience in both diagnosis and treatment of temporomandibular joint disease and orthognathic surgery selected the appropriate condyle position using the condyle movement trajectory interface. During surgical design, the mobile mandibular proximal segment was positioned accordingly. Routine orthognathic surgical planning was completed by determining the location of the mandibular distal segment, which was based on occlusal relationships with maxilla and facial aesthetics. A virtual mandible model was created by integrating data from the proximal and distal segment bone. Subsequently, a solid model was generated through rapid prototyping. The titanium plate was pre-shaped on the mandibular model, and the screw hole positions were determined to design a condylar positioning guide device. In accordance with the surgical plan, orthognathic surgery was performed, involving mandibular bilateral sagittal split ramus osteotomy (SSRO). The distal segment of the mandible was correctly aligned intermaxillary, while the proximal bone segment was positioned using the condylar positioning guide device and the pre-shaped titanium plate. The accuracy of this procedure was assessed in a study involving 10 patients with skeletal class Ⅱ malocclusion. Preoperative condyle location planning and intraoperative positioning were executed using the aforementioned techniques. CBCT data were collected both before the surgery and 2 weeks after the procedure, and the root mean square (RMS) distance between the preope-rative design position and the actual postoperative condyle position was analyzed. RESULTS: The RMS of the condyle surface distance measured was (1.59±0.36) mm (95%CI: 1.35-1.70 mm). This value was found to be significantly less than 2 mm threshold recommended by the expert consensus (P < 0.05). CONCLUSION: The mandibular trajectory may play a guiding role in determining the position of the mandibular proximal segment including the condyle in the orthognathic surgery. Through the use of a condylar positioning guide device and pre-shaped titanium plates, the condyle positioning can be personalized and customized with clinically acceptable accuracy.

[Comparison of the virtual surgical planning position of maxilla and condyle with the postoperative real position in patients with mandibular protrusion].

OBJECTIVE: To compare the difference between virtual surgical planning (VSP) position and postoperative real position of maxilla and condyle, and to explore the degree of intraoperative realization of VSP after orthognathic surgery. METHODS: In this study, 36 patients with mandibular protrusion deformity from January 2022 to December 2022 were included. All the patients had been done bilateral sagittal split ramus osteotomy (SSRO) combined with Le Fort Ⅰ osteotomy under guidance of VSP. The VSP data (T0) and 1-week postoperative CT (T1) were collected, the 3D model of postoperative CT was established and segmented into upper and lower jaws in CCMF Plan software. At the same time, accor-ding to the morphology of palatal folds, the virtual design was registered with the postoperative model, and the unclear maxillary dentition in the postoperative model was replaced. Then the postoperative model was matched with VSP model by registration of upper skull anatomy that was not affected by the operation. The three-dimensional reference plane and coordinate system were established. Selecting anatomical landmarks and their connections of condyle and maxilla for the measurement, we compared the coordinate changes of marker points in three directions, and the angle changes between the line connecting the marker points and the reference plane to analyze the positional deviation and the angle deviation of the postoperative condyle and maxilla compared to VSP. RESULTS: The postoperative real position of the maxilla deviates from the VSP by nearly 1 mm in the horizontal and vertical directions, and the anteroposterior deviation was about 1.5 mm. In addition, most patients had a certain degree of counterclockwise rotation of the maxilla after surgery. Most of the bilateral condyle moved forward, outward and downward (the average distance deviation was 0.15 mm, 1.54 mm, 2.19 mm, respectively), and rotated forward, outward and upward (the average degree deviation was 4.32°, 1.02°, 0.86°, respectively) compared with the VSP. CONCLUSION: VSP can be mostly achieved by assistance of 3D printed occlusal plates, but there are certain deviations in the postoperative real position of maxilla and condyle compared with VSP, which may be related to the rotation axis of the mandible in the VSP. It is necessary to use patient personalized condylar rotation axis for VSP, and apply condylar positioning device to further improve surgical accuracy.

Comparison of disc position stability and condylar bone remodelling between two open disc repositioning surgeries: a retrospective single-centre cohort study.

BACKGROUND AND OBJECTIVE: Open suturing (OSu) and mini-screw anchor (MsA) are two commonly used open disc repositioning surgeries for anterior disc displacement (ADD) of the temporomandibular joint (TMJ). This study assesses the differences in disc position stability (DPS) and condylar bone remodelling (CBR) between these two surgical procedures in a single centre. METHODS: A retrospective cohort study using MRI scans (pre-operation, 1 week and 12 months post-operation) of all patients who had open TMJ disc repositioning surgery from January 2016 to June 2021 at one centre through two surgical techniques (OSu and MsA) was performed. The predictor variable was technique (OSu and MsA). Outcome variables were DPS and CBR. During follow-up, DPS was rated as good, acceptable and poor, and CBR was graded as improved, unchanged, and degenerated. Multivariate analysis was used to compare the DPS and CBR at 12 months after adjusting five factors including age, sex, Wilkes stage, preoperative bone status (normal, mild/moderate abnormal) and the degree of disc repositioning (normal, overcorrected, and posteriorly repositioned). Relative risk (RR) for DPS and CBR was calculated by multivariate logistic regression. RESULTS: Three hundred eighty-five patients with 583 joints were included in the study. MRIs at 12 months showed that 514 joints (93.5%) had good DPS, and 344 joints (62.5%) had improved CBR. Multivariate analysis revealed that OSu had higher DPS (RR=2.95; 95% CI, 1.27-6.85) and better CBR (RR=1.58; 95% CI, 1.02-2.46) than MsA. Among the factors affecting DPS, females had better results than males (RR=2.63; 95% CI, 1.11-6.26) and overcorrected or posteriorly repositioned discs were more stable than normally repositioned discs (RR=5.84; 95% CI, 2.58-13.20). The improvement in CBR decreased with age increasing (RR=0.91; 95% CI, 0.89-0.93). Preoperative mild/moderate abnormal bone status had a higher probability of improved CBR compared to normal preoperative bone status (RR=2.60; 95% CI, 1.76-3.83). CONCLUSION: OSu had better DPS and CBR than MsA. Sex and the degree of disc repositioning impacted DPS, while age and preoperative bone status affected CBR.

Volumetric comparison of mandibular condyles and mandibles in the different skeletal classes in the Saudi population.

Background: Assessing the relationship between the condyle and mandible volume and the various skeletal classes is essential in orthodontic diagnosis. The current study evaluated this relationship using volumetric cone-beam computed tomography (CBCT), cephalometric methods, and the correlations between them. Materials and Methods: The study examined 37 full-head CBCTs (74 condyles) from adults in the Saudi population. The condyle and mandible were separated from within the CBCT images. The volume of each segment was compared to measurements from multiple cephalometric analyses. Results: The combined total condylar volume has a moderate correlation with the maxillomandibular differential in each of the genders and in the total sample. Mandibular volume has a significant correlation with the Wits appraisal (sagittal classification) in males. It was also significantly correlated with the vertical classification using gonial angles in females and in the total sample. Conclusion: The relationship between mandible and condyle volume and cephalometric measurements is both dimensional and within the maxillomandibular complex rather than positional or related to the cranial base. Also, the correlation between the condylar and mandibular volumes and the sagittal and vertical dimensions in the orthodontic skeletal classes provides better insight into the mandibular complex.

Accuracy and stability of the condyle position after orthognathic surgery: A retrospective study.

The purpose of this study was to evaluate the accuracy and stability of condylar positioning in patients treated with bimaxillary procedures compared with patients treated with maxillary procedures alone. All patients had undergone treatment at Odense University Hospital and were treated with inferior maxillary procedures. The primary outcome was changes in condyle position and the primary predictor variable was time: pre-operative (T0) measurements to 1-week post-operative (T1) and 1-year post-operative (T2) measurements. Condyle movement was measured using dual voxel-based alignment. Sixteen patients were included. Seven patients underwent solitary maxillary procedure and 9 patients bimaxillary procedure. Bimaxillary procedures overall showed a condyle positional change in pitch from T0 to T1 and T1 to T2 compared to maxillary procedures alone. Condylar translation was stable despite large differences in positioning. Compared to solitary maxillary procedures, bimaxillary procedures showed a statistically significant anterocranial rotation at 1-week follow-up movement (3.95° vs. -0.95°; SD 3,74 vs 1,05; P value = 0.000) and an additional statistically significant anterocranial movement at 1 year after surgery (4.89° vs 0.60°; SD 3,82 vs 0,92; P value = 0.000). In conclusion a need for greater anterocranial stability of the sagittal split osteotomy than that provided by 3 bicortically fixated screws alone might be indicated.

A proposed protocol for correlation between bone density in hemimandibular hyperplasia radiography and histopathological findings - A retrospective study.

The role of low-dose computed tomography (LDCT) in surgical planning can be assessed based on the correlation among bone density (BD/HU), radiographic values, and the histopathological appearance of hyperplastic overgrowth in mandibular condyles (hemimandibular hyperplasia/osteochondroma). The aim of this study was to evaluate the correlation between LDCT indices of bone-density measurements in surgical planning and histopathological specimens. The patients incuded in this study underwent detailed radiological evaluation as preparation for further clinical procedures. Excised condyles were evaluated in terms of bone density index using LDCT, and then histopathologically to investigate the accuracy of surgical procedures and set the basis for future surgical planning. An index value between both condyles' bone densities represented the relative difference between the healthy condyle and the side with hemimandibular hyperplasia (HH). Patients with unilateral condylar hyperplasia (UCH) showed a statistical correlation between condyle heads with increased bone density (BD) and scintigraphic (SCI) values (p < 0.001). On the other hand, correlation between BD and histopathological studies alone was significant (p < 0.001). With the increase in BD measured in HU in UCH condyles, the overall value of fibrous cartilage layer thickness decreased (p < 0.001). Furthermore, histopathological evaluation indicated that increased bone density on the UCH side resulted in increased total thickness (p > 0.001). The proposed index measurements in the mandibular condyles based on LDCT/BD can be used to estimate the degree of required surgical resection. Results from LDCT radiographic studies correlate with histopathological specimens more than scintigraphy.

Suggestion of a new standard in measuring the mandible via MRI and an overview of reference values in young women.

PURPOSE: Adult idiopathic condylar resorption (AICR) mainly affects young women, but generally accepted diagnostic standards are lacking. Patients often need temporomandibular joint (TMJ) surgery, and often jaw anatomy is assessed by CT as well as MRI to observe both bone and soft tissue. This study aims to establish reference values for mandible dimensions in women from MRI only and correlate them to, e.g., laboratory parameters and lifestyle, to explore new putative parameters relevant in AICR. MRI-derived reference values could reduce preoperative effort by allowing physicians to rely on only the MRI without additional CT scan. METHODS: We analyzed MRI data from a previous study (LIFE-Adult-Study, Leipzig, Germany) of 158 female participants aged 15-40 years (as AICR typically affects young women). The MR images were segmented, and standardized measuring of the mandibles was established. We correlated morphological features of the mandible with a large variety of other parameters documented in the LIFE-Adult study. RESULTS: We established new reference values for mandible morphology in MRI, which are consistent with previous CT-based studies. Our results allow assessment of both mandible and soft tissue without radiation exposure. Correlations with BMI, lifestyle, or laboratory parameters could not be observed. Of note, correlation between SNB angle, a parameter often used for AICR assessment, and condylar volume, was also not observed, opening up the question if these parameters behave differently in AICR patients. CONCLUSION: These efforts constitute a first step towards establishing MRI as a viable method for condylar resorption assessment.

Effect of arthroscopic discopexy on condylar growth in adolescents with temporomandibular joint disc displacement without reduction: A retrospective self-controlled case series study.

This study was a retrospective self-controlled study that aimed to evaluate the effect of arthroscopic discopexy on condylar height and mandibular position in adolescents with temporomandibular joint (TMJ) anterior disc displacement without reduction (ADDwoR). Patients between 10 and 20 years of age and diagnosed with bilateral TMJ ADDwoR by magnetic resonance image (MRI) were included in this study. All patients underwent a period of natural course before arthroscopic surgery and then a follow-up period postoperatively. Changes in condylar height and mandibular position were measured by MRI and X-ray radiographs. Data were analyzed by paired t-test, Pearson correlation analysis, and generalized estimating equations. This study comprised a total of 40 patients with a mean age of 14.80 years. Pearson correlation analysis showed correlations between condylar height and mandibular position changes. The condylar height change during the post-operative period was significantly higher than that during natural course period (3.57 mm, p < 0.001). The changes in mandibular position (including ANB angle, SNB angle, and Pog-Np) were significant different (all p < 0.05) between the two periods. This study found that arthroscopic discopexy can promote condylar growth and correct dentofacial deformity in adolescents with bilateral TMJ ADDwoR.

Imaging features of temporomandibular joint synovial chondromatosis with associated osseous degenerative changes.

Synovial chondromatosis (SC) of the temporomandibular joint (TMJ) is a rare benign disease associated with the formation of multiple cartilaginous nodules in the synovial tissue of the TMJ. This can result in pain, swelling, clicking, limited mouth opening, and osseous degenerative joint changes. A retrospective cross-sectional study was performed to summarize the clinical features, radiographic findings, and surgical and histopathological findings of TMJ SC patients who underwent open surgery over a 24-year period. A radiographic scoring system was used to evaluate osseous changes and correlate condyle and joint fossa degeneration. The study included 38 patients and focused on 38 joints. All 38 of these joints showed degenerative changes in the condyle, while 37 showed osseous degenerative changes in the articular fossa. The degree of condylar degenerative changes was related to the duration of the chief complaints (r = 0.342, P = 0.036) and the histopathological stage of the TMJ SC (r = 0.440, P = 0.006), while the degree of joint fossa degenerative changes was associated with the radiographic extent of the SC (r = 0.504, P = 0.001), type of calcification (r = 0.365, P = 0.024), and the histopathological stage (r = 0.458, P = 0.004).

Can dynamic elastic therapy be established as the standard protocol of closed reduction for moderately displaced extracapsular condylar fractures?

OBJECTIVE: This study was conducted with the aim to establish standard technique of closed reduction (CR) and compare functional outcomes in patients of moderately displaced unilateral extracapsular condylar fractures. MATERIAL AND METHODS: This study is a retrospective randomized controlled trial, conducted at a tertiary care hospital setting from August, 2013 to November, 2018. Patients of unilateral extracapsular condylar fractures with ramus shortening < 7mm and deviation < 35° were divided in two groups by drawing lots and were treated by dynamic elastic therapy and maxillomandibular fixation (MMF). Mean and standard deviation were calculated for quantitative variables, and one way analysis of variance (ANOVA) and Pearson's Chi-square test were used to determine significance of outcomes between two modalities of CR. P value < 0.05 was taken as significant. RESULTS: The numbers of patients treated by dynamic elastic therapy and MMF were 76 (38 in each group). Out of which 48 (63.15%) were male and 28 (36.84%) were female. The ratio of male to female was 1.7:1. The mean ± standard deviation (SD) of age was 32 ± 9.57 years. In patients treated by dynamic elastic therapy, the mean ± SD (at 6-month follow-up) of loss of ramus height (LRH), maximum incisal opening (MIO) and opening deviation were 4.6mm ± 1.08mm, 40.4mm ± 1.57mm and 1.1mm ± 0.87mm respectively. Whereas, LRH, MIO and opening deviation were 4.6mm ± 0.85mm, 40.4mm ± 2.37mm and 0.8mm ± 0.63mm respectively by MMF therapy. One-way ANOVA was statistically insignificant (P value > 0.05) for above mentioned outcomes. Pre-traumatic occlusion was achieved in 89.47% of patients by MMF and in 86.84% patients by dynamic elastic therapy. Pearson's Chi-square test was statistically insignificant (p value < 0.05) for occlusion. CONCLUSION: Parallel results were obtained for both modalities; thus, the technique as dynamic elastic therapy, which promotes early mobilization and functional rehabilitation, can be favored as standard technique of closed reduction for moderately displaced extracapsular condylar fractures. This technique eases patients' stress associated with MMF and prevents ankylosis.

Effect of occlusal stabilisation splint with or without arthroscopic disc repositioning on condylar bone remodelling in adolescent patients.

The aim of this study was to investigate the treatment effects of a stabilisation splint (SS) with and without arthroscopic disc repositioning (ADR) on condylar bone remodelling in adolescent patients with anterior disc displacement without reduction (ADDwoR). Cone beam computed tomography and magnetic resonance imaging were used to analyse condylar bone remodelling, condyle position, and disc position. Twenty-two temporomandibular joints of 14 patients who underwent ADR (age range 12-20 years; mean follow-up 12.5 ± 7.8 months) and 21 temporomandibular joints of 14 patients who did not undergo ADR (age range 13-20 years; mean follow-up 11.1 ± 5.1 months) were included. The change in bone volume (P < 0.001), rate of bone volume change (P < 0.001), and change in condyle height (P = 0.031) were significantly greater in patients with ADR than in those without ADR. The changes in posterior joint space (P = 0.013), superior joint space (P = 0.020), and ratio of condyle sagittal position (P = 0.013) were significantly greater in patients with ADR than in those without ADR. All discs in patients who underwent ADR and one disc in those who did not undergo ADR were backward repositioned. In conclusion, in adolescent patients with ADDwoR, ADR with SS therapy achieved better condyle and disc position than SS therapy alone, and also induced bone generation.

retrospective evaluation of condylar morphology using panoramic radiography in a sample of Turkish population.

BACKGROUND: The temporomandibular joint is one of the most complex anatomic structures. It takes a great role in masticatory system and helps to make possible some functions such as speaking, chewing and swallowing. Clinicians should have sufficient anatomical knowledge to assess relationships of the hard and soft tissues, including the mandibular condyle, glenoid fossa, articular eminence of the temporal bone, the articular disc and its attachments. The aim of this study was to evaluate the frequency of different types of mandibular condyles and its distribution according to the age and gender. It was also evaluated whether the condyle types were bilaterally symmetrical or not. MATERIALS AND METHODS: A total of 1315 digital panoramic images which obtained from the patients suffering from the dental problems were assessed. Demographic data, condylar morphology were noted. All obtained data were analysed by using descriptive statistics. Morphology of mandibular condyles were classified into four shapes as identified in other studies, namely: type I - oval shape, type II - diamond shape, type III - bird beak shape, type IV - crooked finger shape. Two independent examiners, who have 19 and 7 years of experience in oral and dentomaxillofacial radiology, made a consensus and evaluated all images. RESULTS: A total of 1315 digital panoramic images were assessed. Seven hundred sixty-seven [58.3%] the patients were female and 548 [41.6%] were male. The age range of patients was from 18 to 84 years. Right-left condyle types were found to be symmetrical in the range of 67% of the subpopulation examined in the study. For the consensus, 'oval' condyle was common on both the right and left, while 'crooked finger' condyle was the rarest. CONCLUSIONS: The temporomandibular joint is the most important structure for all jaw functions such as speech, swallowing. In order for all these functions to continue in a healthy way, the anatomical structure should be known very well down to the finest detail. Identification of anatomical structures and their variations can play an important role in implant dentistry. Clinicians commonly prefer conventional radiologic methods to evaluate dentomaxillofacial region. Although the most of the variations are asymptomatic and require no treatment,correct identification of these findings will reduce unnecessary further diagnostic assessments and will provide more appropriate treatment plans.