Morphological and morphometric analysis of tarsal bones according to sex.

PURPOSE: Our aim in the study is to measure the area and volume of the tarsal bones and examine the typing of the talus and calcaneus joint surfaces according to sex. METHODS: In our study, the area and volume measurements of 630 tarsal bones and the morphology of the talus/calcaneus were analyzed by transferring thin-section Computed Tomography (CT) images to the 3D Slicer program. RESULTS: The volume and area sizes of the foot bones are calcaneus, talus, cuboid, navicular, medial cuneiform, lateral cuneiform, and intermediate cuneiform, respectively. All area and volume values of males were statistically higher than females (p < 0.05). The right side calcaneus area, intermediate cuneiform area, and lateral cuneiform area values were statistically higher than the left side (p < 0.045, p < 0.044, p < 0.030, respectively). There was no statistical relationship between age and area/volume values (p > 0.05). Three different types were seen in the calcaneus and seven in the talus. The most common type in the calcaneus was B1 (40%), and the least common type was A (27.8%). Regardless of the subgroups, the most common type in the talus was type B (37.8%), while the least common type was E2 (1.1%). CONCLUSION: Although morphometric measurements of tarsal bones differed according to sex, they did not differ according to age. The frequency of occurrence of the types of articular surfaces of the talus and calcaneus varies according to populations. We think that the morphometry and morphology of tarsal bones will contribute to invasive procedures regarding tarsal bones and surrounding structures, and that three-dimensional bone modeling can be used to create educational materials.

Searching for alternative high DNA-yielding bone types for DNA analysis of aged skeletal remains.

The petrous bone contains significantly higher amounts of DNA than any other human bone. Because of highly destructive sampling and because it is not always part of the recovered remains, the need for alternative sources of DNA is important. To identify additional optimal bone types, petrous bones were compared to femurs, tali, and calcanei sampled from 66 adult skeletons from two distinct modern-era Christian cemeteries. An extraction method employing full demineralization was used to obtain DNA, real-time PCR quantification to ascertain DNA quantity and degradation, and a commercial forensic short tandem repeats (STR) PCR amplification kit to determine genetic profiles. Statistical analysis was performed to explore the differences in DNA yield, DNA degradation, and success of STR amplification. A systematic studies exploring intra-skeletal variability in DNA preservation including various excavation sites differing by time period and geographical position are rare, and the second part of the investigation was based on a comparison of both archaeological sites, which allowed us to compare the effect of different post-mortem intervals and environmental conditions on DNA preservation. The older burial site in Crnomelj was active between the 13th and 18th century, whereas the more recent Polje burial was in use from the 16th to 19th century, creating different temporal and geographical environments. Results for the Crnomelj burial site revealed that the petrous bone outperformed all other bone types studied, except the calcaneus. At the Polje archeological site calcanei, tali, and femurs yielded the same STR typing success as petrous bones. The results obtained highlight the importance of careful bone sample selection for DNA analysis of aged skeletal remains. In addition to petrous bones, calcanei were found to be an alternative source of DNA when older burial sites are investigated. When more recent burial sites are processed, calcanei, tali, and femurs should be sampled besides petrous bones, not only because they exhibited good performance, but also because of easier sampling and easier grinding in the case of trabecular bones. This study contributes valuable insights into the potential use of various skeletal types as a source of DNA for investigation of aged skeletal remains, and it offers practical implications for forensic and archaeological investigations.

Morphologic evaluation of vascular foramina in dry calcaneus.

PURPOSE: The purpose of this study is to provide reference data regarding the morphology of vascular foramina (VF) of calcaneus among the Turkish population. METHODS: This study was performed using 49 dry calcanei (26 right, 23 left). The number as well as the location of VF in relation of each surface of calcaneus were evaluated. The total length (TL), the distance between the most posterior point of calcaneus and the largest foramina on the medial (LMS), lateral (LLS), superior (LSS) and inferior (LIS) surfaces were measured and foraminal indexes of the largest foramina on the medial (FI1), lateral (FI2), superior (FI3) and inferior (FI4) surfaces were calculated. RESULTS: The mean values of the TL, LMS, LLS, LSS, LIS were measured to be 74.83 ± 6.00 mm, 41.34 ± 4.78 mm, 31.18 ± 7.63 mm, 49.61 ± 13.40 mm, 39.25 ± 13.56 mm, respectively. The mean values of the FI1, FI2, FI3 and FI4 were calculated to be 55.40 ± 6.21%, 41.73 ± 10.06%, 66.01 ± 16.82%, 52.16 ± 16.80%, respectively. The maximum numbers of VF were detected most commonly on the lateral (28.29%) and medial (26.45%) surfaces, and least commonly on the anterior (0.98%) and posterior (8.29%) surfaces. CONCLUSIONS: VF were observed to be most commonly located on the lateral and medial surfaces, and least commonly on the anterior and posterior surfaces. Having adequate knowledge of the morphologic and morphometric properties of the VF is important in regarding the surgical approaches to the calcaneus towards the aim of reducing the vascular damage, especially in lateral approaches for orthopedists and of using differential sign from cystic lesions for radiologists.

Prediction of carcass weight using the morphometry of ankle bones in hair goats.

BACGROUND: Morphologic measurements such as body lenght, wither height, heart girth, chest width, body leght, cannon-bone circumference is used to predict carcass weight. For this purpose, estimating carcass weight with measurements of key bones such as ankle bones, which play a significant role in the balance distribution of body weight, seems possible. OBJECTIVES: The aim of this study is to create new regression models for effective carcass weight estimation by using the morphometric data of the talus and calcaneus bones of hair goats. METHODS: Study materials consisted of talus and calcaneus bones obtained from abattoir products of hair goat kids (12-18 months old, 20 female and 20 male) and adult hair goats (36-48 months old, 20 female and 20 male). Morphometric measurements of the talus and calcaneus of each animal were taken by a digital caliper. Using the morphometric measurements, an index and a factor were calculated for each bone. Regression analysis and correlations were examined in IBM SPSS 21 programme. RESULTS: As a result, statistical analysis of GLc, GLt, Bd, Calfactor and Talfactor were statistically significant on predicting carcass weight. CONCLUSION: Specific anatomical structures, such as certain bone measurements, such as talus and calnaneus could serve as indicators of growth performance and also carcass weight performance. In addition new anatomical factors and indices may be produced and new regression methods may be applied with these new parameters to predict carcass weight.

Accessory foot bones in a Portuguese identified skeletal collection.

Data from dry bone samples, collected from anatomical or archaeological collections, can improve the knowledge regarding accessory foot bones, including prevalence, size, shape and laterality, that can be useful in disparate fields of research, from medicine to bioarcheology. In the present study, the prevalence of six accessory foot bones (os trigonum, calcaneus secundarium, accessory navicular bone, os vesalianum, os sustentaculum and os intermetatarseum) was assessed in a sample of 486 individuals (226 females, 260 males) from the Coimbra Identified Skeletal Collection (CISC). The most frequent accessory bones are os trigonum (9.9%; 48/485) and calcaneus secundarium (6.0%; 29/486), while the most uncommon is os sustentaculum (0.4%; 2/486). No sex differences were observed. All accessory bones occur more often unilaterally, with the exception of the accessory navicular bone that, in the majority of cases, occurs bilaterally. The unilateral expression of os trigonum, calcaneus secundarium and os vesalianum was mostly in the right foot. The co-occurrence of accessory foot bones was recorded in 1.7% of the individuals (8/486), and the combinations of os trigonum and calcaneus secundarium were the most frequently observed. This research emphasizes the relevance of conducting studies on reference skeletal collections in order to gain a comprehensive understanding of anatomical variations in the foot. This understanding is crucial for accurate diagnoses and successful treatment in clinical settings, as well as for establishing population comparison standards in the fields of bioarchaeology and forensic anthropology.

Ontogenic transformation of the ankle from the initial mediolateral arrangement of the calcaneus and talus: A histological study of human embryos and early fetuses.

The human calcaneus is robust and provides a prominent heel for effective bipedal locomotion, although the adjacent talus has no muscle attachments. However, there is incomplete information about the morphological changes in these prominent bones during embryo development. We examined serial histological sections of 23 human embryos and early-term fetuses (approximately 5-10 weeks' gestational age [GA]). At a GA of 5 weeks, the precartilage talus was parallel to and on the medial side of the calcaneus, which had a prolate spheroid shape and consisted of three masses. At a GA of 6 weeks, the cartilaginous talus extended along the proximodistal axis, and the tuber calcanei became long and bulky, with a small sustentaculum talus at the "distal" side. At a GA of 6 to 8 weeks, the sustentaculum had a medial extension below the talus so that the talus "rode over" the calcaneus. In contrast, the talus had a more complex shape, depending on the growth of adjacent bones. At a GA of 9 to 10 weeks, the talus was above the calcaneus, but the medial part still faced the plantar subcutaneous tissue because of the relatively small sustentaculum. Therefore, the final morphology appeared after an additional several weeks. Muscle activity seemed to facilitate growth of the tuber calcanei, but growth of the other parts of calcaneus, including the sustentaculum, seemed to depend on active proliferation at the different sites of cartilage. Multiple tendons and ligaments seemed to fix the talus so that it remained close to the calcaneus.

Linear measurements and shape analysis in the calcaneus of selected dog breeds.

The vast array of dog breeds showcases a remarkable diversity that extends to osteological differences. Exploring these morphological distinctions and establishing reference data for various dog breeds are essential steps in comprehending the evolutionary changes that dogs have undergone. In this study, we conducted linear measurements of the calcaneus and performed shape analyses on selected dog breeds to elucidate distinctive characteristics among them. X-ray images of the calcaneus from six different dog breeds-Maltese Terrier, Toy Poodle, Pomeranian, Cavalier King Charles Spaniel, French Bulldog and Golden Retriever-were utilized for this investigation. Radiological images were obtained from a medio-lateral exposure, positioned 30 cm away from the x-ray device. From these images, four linear length measurements and two angle values were extracted. Additionally, a 2D geometric morphometric analysis was conducted using 32 semi landmarks placed on the radiological images. Linear measurements were assessed using ANOVA, while principal component analysis was employed to examine shape variations across all individuals. Shape differences between species were further elucidated through canonical variates analysis. The results revealed that the Golden Retriever exhibited the highest values for linear measurements, while the Pomeranian showed the lowest. Maltese Terriers displayed the highest dorsal calcaneal angle value. Notably, there were significant differences in calcaneal body length among all breeds, except for the Toy Poodle and Cavalier King Charles Spaniel. Moreover, Maltese Terriers exhibited statistically distinct angular measurements compared to other breeds. Principal component analysis unveiled that the first principal component explained 32.69% of the total variation, with the cranial edge of the calcaneal body being closer to the body in individuals with higher values. Shape variations also indicated that Golden Retrievers displayed a broader range of shapes compared to French Bulldogs, which exhibited a more conservative distribution. While there was no clear breed-specific distinction according to the first principal component, Cavalier King Charles Spaniels generally showed lower values. In canonical variates analysis, distinctions in calcaneal shape between species were apparent, with Golden Retrievers, Cavalier King Charles Spaniels and French Bulldogs displaying positive values for the first canonical variates. The highest Procrustes distance was observed between Maltese Terriers and Cavalier King Charles Spaniels. Notably, allometry was found to be statistically insignificant. This comprehensive study utilized both linear and geometric morphometric analyses based on x-ray images, yielding promising results. The integration of imaging systems in veterinary anatomy research presents numerous opportunities for studying animal welfare and health, utilizing various materials such as bones and cadavers. These advancements hold the potential for further enhancing our understanding of animal morphology and well-being.

Intracemetery relationships: Non-metric trait combination analysis of Maspalomas of Gran Canaria (Canary Islands, Spain).

Maspalomas is one of the most important archaeological sites in Gran Canaria, Canary Islands. The necropolis is one of the few funerary sites on the island where several the skeletons were found in anatomical position. The burials correspond to graves and cists dated between the 12th and 15th century CE. These graves and cists are clustered together in different formations across the necropolis, giving rise to a complex composition that denotes the existence of possible interpersonal relationships of the people buried there. A total of 135 calcanei and 118 tali were analysed to find non-metric traits and to test whether the clustered burials share a non-metric trait relationship. Trait combinations were formed using talus and calcaneus non-metric traits separately. The results of this study suggest that the individuals of Maspalomas showed a very high prevalence of lateral and medial talar facets, attributed to prolonged squatting position and/or walking on uneven ground. The calcaneal facet pattern (that may be aetiologically genetic) is more closely related to that observed among North-Africans or Indians than to Western Europeans. Calcaneal facet type Ib, and other genetically-determined traits, such as the extra facet extension of Posterior Facet, or the medial root of the inferior extensor retinaculum trait, either as single traits or as the combination of both traits, were significantly associated with individuals buried in different geographical areas of the necropolis defined by differences in burial structures, a finding that may suggest that genetically-linked individuals were buried in a separate area of the necropolis. The use of trait combination analysis in this study shows that the method can be applied to identify relationships among genetically or professionally related individuals that were subjected to a different burial procedure by their contemporaries.

An atlas of anatomical variants of the human calcaneus.

The usefulness of anatomical variation is determined by the knowledge of why nonmetric traits appear. Clear descriptions of the traits are a necessary task, due to the risk of confusing anatomical variants and evidence of trauma. Numerous interpretations of the appearance of calcaneal anatomical variants add to the need of an anatomical atlas of calcaneal nonmetric traits. We have analyzed a total of 886 calcanei; 559 belong to different modern and pre-Hispanic samples, and 327 bones were studied from a reference collection from Athens. In this study, we present the anatomical variations that exist on the calcaneus bone, some of which have rarely been mentioned in previous research. The standardization of methods proposed may be useful to experts working in human anatomy, physical anthropology as well as comparative morphology, due to usefulness of this information during surgery, and bioanthropology to observe and study the lifestyle of past populations.

Trabecular bone variation in the gorilla calcaneus.

OBJECTIVES: Calcaneal external shape differs among nonhuman primates relative to locomotion. Such relationships between whole-bone calcaneal trabecular structure and locomotion, however, have yet to be studied. Here we analyze calcaneal trabecular architecture in Gorilla gorilla gorilla, Gorilla beringei beringei, and G. b. graueri to investigate general trends and fine-grained differences among gorilla taxa relative to locomotion. MATERIALS AND METHODS: Calcanei were micro-CT scanned. A three-dimensional geometric morphometric sliding semilandmark analysis was carried out and the final landmark configurations used to position 156 volumes of interest. Trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and bone volume fraction (BV/TV) were calculated using the BoneJ plugin for ImageJ and MATLAB. Non-parametric MANOVAs were run to test for significant differences among taxa in parameter raw values and z-scores. Parameter distributions were visualized using color maps and summarized using principal components analysis. RESULTS: There are no significant differences in raw BV/TV or Tb.Th among gorillas, however G. b. beringei significantly differs in z-scores for both parameters (p = <0.0271). All three taxa exhibit relatively lower BV/TV and Tb.Th in the posterior half of the calcaneus. This gradation is exacerbated in G. b. beringei. G. b. graueri significantly differs from other taxa in Tb.Sp z-scores (p < 0.001) indicating a different spacing distribution. DISCUSSION: Relatively higher Tb.Th and BV/TV in the anterior calcaneus among gorillas likely reflects higher forces associated with body mass (transmitted through the subtalar joint) relative to forces transferred through the posterior calcaneus. The different Tb.Sp pattern in G. b. graueri may reflect proposed differences in foot positioning during locomotion.

Influence of Talar and Calcaneal Morphology on Subtalar Kinematics During Walking.

BACKGROUND: Cadaver biomechanical testing suggests that the morphology of articulating bones contributes to the stability of the joints and determines their kinematics; however, there are no studies examining the correlation between bone morphology and kinematics of the subtalar joint. The purpose of this study was to investigate the influence of talar and calcaneal morphology on subtalar kinematics during walking in healthy individuals. METHODS: Forty ankles (20 healthy subjects, 10 women/10 men) were included. Participants walked at a self-selected pace while synchronized biplane radiographs of the hindfoot were acquired at 100 images per second during stance. Motion of the talus and calcaneus was tracked using a validated volumetric model-based tracking process, and subtalar kinematics were calculated. Talar and calcaneal morphology were evaluated using statistical shape modeling. Pearson correlation coefficients were used to assess the relationship between subtalar kinematics and the morphology features of the talus and calcaneus. RESULTS: This study found that a shallower posterior facet of the talus was correlated with the subtalar joint being in more dorsiflexion, more inversion, and more internal rotation, and higher curvature in the posterior facet was correlated with more inversion and eversion range of motion during stance. In the calcaneus, a gentler slope of the middle facet was correlated with greater subtalar inversion. CONCLUSION: The morphology of the posterior facet of the talus was found to a primary factor driving multiplanar subtalar joint kinematics during the stance phase of gait. CLINICAL RELEVANCE: This new knowledge relating form and function in the hindfoot may assist in identifying individuals susceptible to subtalar instability and in improving implant design to achieve desired kinematics after surgery.

Comparing lateral plantar process trabecular structure to other regions of the human calcaneus.

Investigating skeletal adaptations to bipedalism informs our understanding of form-function relationships. The calcaneus is an important skeletal element to study because it is a weight-bearing bone with a critical locomotor role. Although other calcaneal regions have been well studied, we lack a clear understanding of the functional role of the lateral plantar process (LPP). The LPP is a bony protuberance on the inferolateral portion of the calcaneus thought to aid the tuberosity in transmission of ground reaction forces during heel-strike. Here, we analyze LPP internal trabecular structure relative to other calcaneal regions to investigate its potential functional affinities. Human calcanei (n = 20) were micro-CT scanned, and weighted spherical harmonic analysis outputs were used to position 251 volumes of interest (VOI) within each bone. Trabecular thickness (Tb.Th), spacing (Tb.Sp), degree of anisotropy (DA), and bone volume fraction (BV/TV) were calculated for each VOI. Similarities in BV/TV and DA (p = 0.2741) between the LPP and inferior tuberosity support suggestions that the LPP is a weight-bearing structure that may transmit forces in a similar direction. The LPP significantly differs from the inferior tuberosity in Tb.Th and Tb.Sp (p < 0.05). Relatively thinner, more closely spaced trabeculae in the LPP may serve to increase internal surface area to compensate for its relatively small size compared to the tuberosity. Significant differences in all parameters between LPP and joint articular surfaces indicate that trabecular morphology is differently adapted for the transmission of forces associated with body mass through joints.

Effect of sequential burr passes on osteotomy magnitude and calcaneal morphology in minimally invasive Zadek osteotomy.

PURPOSE: This study aimed to evaluate the impact of each burr pass on degree of correction, gap size and calcaneal morphology in MIS Zadek osteotomy. METHODS: MIS Zadek osteotomy was performed on ten cadaveric specimens using a 3.1 mm Shannon burr. After each burr pass, the osteotomy gap was manually closed, and the subsequent burr passes were carried out with the foot held in dorsiflexion, which was repeated five times. Lateral X-rays were taken before and after each burr pass. Two independent reviewers measured the dorsal calcaneal length after each burr passage, as well as changes in several calcaneal parameters including X/Y ratio, Fowler Philip angle, and Böhler angle. RESULTS: The average decrease in dorsal calcaneal cortical length with each burr pass was as follows: 2.6 ± 0.9 mm at the 1st pass, 2.4 ± 1 mm at the 2nd pass, 2 ± 1 mm at the 3rd pass, 1.6 ± 1 mm at the 4th pass, and 1.4 ± 0.7 mm at the 5th pass. The Fowler Philip and Böhler angles consistently decreased while the X/Y ratio consistently increased following each consecutive burr pass. Interobserver reliability analysis demonstrated good agreement for all parameters. CONCLUSION: The results revealed the trends of length and anatomical changes in the calcaneus with each burr pass. On average, a dorsal wedge resection of 10 mm was achieved after 5 burr passes. This data can aid surgeons in determining the optimal number of burr passes required for a particular amount of resection, ensuring the attainment of the desired patient-specific surgical outcome.

An anatomical approach to the tarsal tunnel syndrome: what can ankle's medial side anatomy reveal to us?

BACKGROUND: The heel is a complex anatomical region and is very often the source of pain complaints. The medial heel contains a number of structures, capable of compressing the main nerves of the region and knowing its anatomical topography is mandatory. The purpose of this work is to evaluate if tibial nerve (TN) and its main branches relate to the main anatomical landmarks of the ankle's medial side and if so, do they have a regular path after emerging from TN. METHODS: The distal part of the legs, ankles and feet of 12 Thiel embalmed cadavers were dissected. The pattern of the branches of the TN was registered and the measurements were performed according to the Dellon-McKinnon malleolar-calcaneal line (DML) and the Heimkes Triangle (HT). RESULTS: The TN divided proximal to DML in 87.5%, on top of the DML in 12,5% and distal in none of the feet. The Baxter's nerve (BN) originated proximally in 50%, on top of the DML in 12,5% and distally in 37.5% of the cases. There was a strong and significant correlation between the length of DML and the distance from the center of the medial malleolus (MM) to the lateral plantar nerve (LPN), medial plantar (MPN) nerve, BN and Medial Calcaneal Nerve (MCN) (ρ: 0.910, 0.866, 0.970 and 0.762 respectively, p <  0.001). CONCLUSIONS: In our sample the TN divides distal to DML in none of the cases. We also report a strong association between ankle size and the distribution of the MPN, LPN, BN and MCN. We hypothesize that location of these branches on the medial side of the ankle could be more predictable if we take into consideration the distance between the MM and the medial process of the calcaneal tuberosity.

3D characterization of the triple-bundle Achilles tendon from in vivo high-field MRI.

The Achilles tendon consists of three subtendons that transmit force from the triceps surae muscles to the calcaneus. Individual differences have been identified in Achilles subtendon morphology and twist in cadavers, which may have implications for triceps surae mechanics and function. High-field magnetic resonance imaging (MRI) can be used to identify boundaries within multi-bundle tissues, which could then enable studies of subtendon structure-function relationships in humans. The objective of this study was to use high-field MRI (7T) to image and reconstruct Achilles subtendons arising from the triceps surae muscles. We imaged the dominant lower leg of a cohort of healthy human subjects (n = 10) using a tuned musculoskeletal sequence (double echo steady state sequence, 0.4 mm isotropic voxels). We then characterized the cross-sectional area and orientation of each subtendon between the MTJ and calcaneal insertion. Image collection and segmentation was repeated to assess repeatability. Subtendon morphometry varied across subjects, with average subtendon areas of 23.5 ± 8.9 mm2 for the medial gastrocnemius, 25.4 ± 8.9 mm2 for the lateral gastrocnemius, and 13.7 ± 5.9 mm2 for the soleus subtendons. Repeatable subject-specific variations in size and position of each subtendon were identified over two visits, expanding on prior knowledge that high variability exists in Achilles subtendon morphology across subjects.

Sustentaculum tali in Chinese population: anatomy and clinical significance.

BACKGROUND: Previous studies lacked adequate quantitative data on sustentaculum tali (ST), especially in Chinese population. The aims of this study are to explore the quantitative morphology of ST in dried bone specimens, and to discuss its implications related to ST screw fixation, talar articular facet variation, as well as subtalar coalitions. METHODS: A total of 965 dried intact calcanei from Chinese adult donors were evaluated. All linear parameters were measured by two observers with a digital sliding vernier caliper. RESULTS: Most parts of ST body can accommodate a commonly-used 4-mm-diameter screw, but the minimum height of anterior ST is only 4.02 mm. The shapes of the STs are slightly affected by left-right, subtalar facet, but the subtalar coalition may potentially increase the sizes of STs. The incidence of tarsal coalition is 14.09%. Among the osseous connection, there are 58.8% of type A articular surface and 76.5% of middle and posterior talar facet (MTF and PTF) involvement. ROC curve shows that subtalar coalition will be detected when ST length is greater than 16.815 mm. CONCLUSIONS: Theoretically, all the STs can accommodate 4 mm diameter screw, but a 3.5 mm diameter screw is recommended to be placed in the middle or posterior of the small ST for safety. The shapes of the STs are greatly influenced by the subtalar coalition, while they are less affected by left-right, subtalar facet. The osseous connection is common in type A articular surface and always involved in the MTF and PTF. The cut-off value of the length of STs was confirmed as 16.815 mm for predicting subtalar coalition.

Anatomic Description of the Calcaneocuboid Joint: Implications for Staple Fixation.

Understanding the anatomy of the calcaneocuboid (CCJ) remains essential when selecting staple fixation to optimize osseous purchase during rearfoot procedures. This anatomic study quantitatively describes the CCJ in relation to staple fixation sites. The calcaneus and cuboid from 10 cadavers were dissected. Widths at 5 mm and 10 mm increments away from the joint were measured in dorsal, midline, and plantar thirds of each bone. The widths between each position's 5 mm and 10 mm increments were compared using the Student's t test. The widths among the positions at both distances were compared using an ANOVA then post hoc testing. Statistical significance was set at p ≤ 0.05. The middle (23 ± 3 mm) and plantar third (18 ± 3 mm) of the calcaneus at the 10 mm interval was greater than the 5 mm interval (p = .04). At 5 mm distal to the CCJ, the dorsal third of the cuboid maintained a statistically significant greater width than the plantar third (p = .02). The 5 mm (p = .001) and 10 mm (p = .005) dorsal calcaneus widths as well as the 5 mm (p = .003) and 10 mm (p = .007) middle calcaneus widths were significantly greater than the plantar widths. This investigation supports the use of 20 mm staple 10 mm away from the CCJ in dorsal and midline orientations. Care should be taken when placing a plantar staple within 10 mm proximal to the CCJ as the legs may extend beyond the medial cortex compared to dorsal and midline placements.

A comparison of effectiveness of sex estimation from the calcaneus and talus in a Thai population / Comparación de la efectividad de la estimación del sexo a partir del calcáneo y el talus en una población tailandesa

SUMMARY: Sex estimation is an important aspect of skeletal identification. In addition, previous studies have found that the sex estimation of each race is different. Thus, it is necessary to develop discriminant function equations for the estimation of sex for the Thai population. This study aims to investigate the relationship between width, length and height of the calcaneus and talus with regards to sex and compare the effectiveness of sex estimation between the calcaneus alone, the talus alone, and between both the calcaneus and talus. A total of 200 individuals (100 males and 100 females) were used in this study; ages ranged from 19 to 94 years. Thirteen variables of calcaneus and ten variables of talus were measured. The authors created discriminant function equations for the estimation of sex and tested the efficiency of the equations obtained by using a test group of 40 individuals (20 males and 20 females). By analyzing the mean values of the variables in the calcaneus and the talus, it was shown that males were significantly different from females (p0.05). A stepwise method was used to create 6 equations for sex estimation. The equations were categorized from between the calcaneus alone, the talus alone, and between both the calcaneus and the talus, providing a sex estimation accuracy of between 88.5 and 93.0 %. Using the test group, it was shown that discriminant function equations from the calcaneus alone, the talus alone, and the calcaneus and the talus together, can estimate sex at a high level of accuracy. Sex estimation accuracy was greater than 85 % in all equations. Therefore, the discriminant function equations from the calcaneus alone, the talus alone, and between both the calcaneus and the talus, from this study can be applied to the Thai population.

La estimación del sexo es un aspecto importante de la identificación esquelética. Estudios previos han encontrado que la estimación del sexo de cada raza es diferente. Por lo tanto, es necesario desarrollar ecuaciones de funciones discriminantes para la estimación del sexo de la población tailandesa. Este estudio tuvo como objetivo investigar la relación entre el ancho, el largo y la altura de los huesos calcáneo y talus con respecto al sexo y comparar la efectividad de la estimación del sexo entre el calcáneo solo, el talus solo y entre el calcáneo y el talus. Se utilizaron un total de 200 huesos de individuos adultos (100 hombres y 100 mujeres), cuyas edades oscilaron entre 19 y 94 años. Se midieron trece variables del calcáneo y diez variables del talus. Los autores crearon ecuaciones de funciones discriminantes para la estimación del sexo y probaron la eficiencia de ellas usando un grupo de prueba de huesos de 40 individuos (20 hombres y 20 mujeres). Al analizar los valores medios de las variables en el calcáneo y el talus, se demostró que los huesos de los hombres eran significativamente diferentes al de las mujeres (p0.05). Se utilizó un método paso a paso para crear 6 ecuaciones para la estimación del sexo. Las ecuaciones se clasificaron entre el calcáneo solo, el talus solo y entre el calcáneo y el talus, lo que proporcionó una precisión de estimación del sexo de entre 88,5 y 93,0 %. Usando el grupo de prueba, se demostró que las ecuaciones de funciones discriminantes del calcáneo solo, el talus solo y el calcáneo y el talus juntos pueden estimar el sexo con un alto nivel de precisión. La precisión de la estimación del sexo fue superior al 85 % en todas las ecuaciones. Por lo tanto, las ecuaciones de la función discriminante del calcáneo solo, el talus solo y entre el calcáneo y el talus de este estudio se pueden aplicar a la población tailandesa.

Three-dimensional morphological variations in the calcaneus and talus in relation to the hallux valgus angle.

BACKGROUND: The present study aimed to clarify the morphological patterns of the calcaneus and talus that are associated with hallux valgus angle (HVA) by quantifying the differences in the hindfoot bone morphology between left and right sides in HV patients with clear bilateral difference of HVA. METHODS: Three-dimensional (3D) computed tomography scans of 32 feet of 16 patients with HV who had right-to-left HVA differences of more than 5 degrees (68.8 ± 8.6 years) were enrolled, and 3D surface models of the calcaneus and talus were generated. A total of 556 and 430 landmarks were placed on the calcaneal and talar surfaces, respectively, to calculate the principal components (PCs) of shape variations. The PC scores were compared between the small and large HVA sides within an individual. RESULTS: The calcaneus in patients with a larger HVA (mean, 43.2 degrees) possessed slender calcaneal tuberosity, more medially oriented posterior articular surface in the coronal plane, and narrower and more concave anterior-middle articular surfaces compared to those with a small HVA (mean, 33.7 degrees). The talus with a larger HVA exhibited more medially oriented talar head in the transverse plane and more anteriorly protruded lateral region of the talar head compared to the small HVA. CONCLUSIONS: The morphological patterns of the calcaneus in patients with a larger HVA allows the hindfoot bones to easily rotate in the everting direction, while those of the talus could induce a larger internal rotation of the first metatarsal. These morphological patterns of the calcaneus and talus could be structural factors affecting the HV.

Investigation of the relationship between foot deformities and radiographic measurements of the talus and calcaneus / Investigación de la relación entre las deformidades del pie y las mediciones radiográficas del talo y del calcáneo

SUMMARY: The weight of the body is transmitted to the foot through the subtalar joint and talus. Considering the important location of the talus and calcaneus, the morphological structures of these bones may affect the biomechanics of the subtalar joint. At the same time, the morphological structure of these bones is important in some common foot deformities. We aimed to investigate whether the various measurements of the talus and calcaneus are associated with different foot deformities in this study. In this study, radiography images of 158 (72 male and 86 female) patients within the mean age of 44 years were retrospectively examined. Eleven different measurements of the talus and calcaneus were obtained from the lateral and antero-posterior radiographs of the patients. A total of 158 patient's routine clinic radiographs were retrospectively assessed, which have calcaneal spur (n=63), hallux valgus (n=32) and control group (n=63). We determined that the body height of the calcaneus, maximum width of the head of the talus, minimum anterior width of the calcaneus were significantly different between calcaneal spur group and control group. Maximum length fibular malleolar facet of the talus was significantly different between age groups. And we determined that the calcaneal index was significantly different between hallux valgus group and control groups. Also all measurements were significantly different between males and females. As a result, some measurements that significantly determine the morphology of the talus and calcaneus were found to be significant between deformity groups and control groups. We think that our study will contribute to the literature as it is the first study in which the measurements obtained from the radiographic images of the talus and calcaneus are associated with foot deformities.

El peso del cuerpo se transmite al pie a través de la articulación subtalar y el talo. Teniendo en cuenta la importante ubicación del talo y el calcáneo, las estructuras morfológicas de estos huesos pueden afectar la biomecánica de la articulación subtalar. Al mismo tiempo, la estructura morfológica de estos huesos es importante en algunas deformidades comunes del pie. Nuestro objetivo fue investigar si las diversas medidas del talo y el calcáneo están asociadas con diferentes deformidades del pie en este estudio. Se examinaron retrospectivamente imágenes radiográficas de 158 pacientes (72 hombres y 86 mujeres) con una edad promedio de 44 años. Se obtuvieron once medidas diferentes del talo y el calcáneo a partir de las radiografías lateral y anteroposterior de los pacientes. Se evaluaron retrospectivamente un total de 158 radiografías clínicas de rutina de los pacientes, los cuales tenían espolón de calcáneo (n=63), hallux valgus (n=32) y grupo control (n=63). Determinamos que la altura del cuerpo del calcáneo, el ancho máximo de la cabeza del talo, el ancho anterior mínimo del calcáneo fueron significativamente diferentes entre el grupo con espolón calcáneo y el grupo control. La longitud máxima de la faceta maleolar fíbular del talo era significativamente diferente entre los grupos de edad. También determinamos que el índice calcáneo fue significativamente diferente entre el grupo de hallux valgus y los grupos controles. Además, todas las medidas fueron significativamente diferentes entre hombres y mujeres. Como resultado, algunas medidas que determinan la morfología del talo y el calcáneo resultaron significativas entre los grupos de deformidad y los grupos controles. Estimamos que nuestro estudio contribuirá a la literatura debido a que es el primer reporte en el que las medidas obtenidas de las imágenes radiográficas del talo y el calcáneo se asocian con deformidades del pie.