Molecularly imprinted resin modified with ionic liquid for dispersive filter extraction and determination of perfluoroalkyl acids in eggs.

Perfluoroalkyl acids (PFAAs) are emerging pollutants that endangers food safety. Developing methods for the selective determination of trace PFAAs in complex samples remains challenging. Herein, an ionic liquid modified porous imprinted phenolic resin-dispersive filter extraction-liquid chromatography-tandem mass spectrometry (IL-PIPR-DFE-LC-MS/MS) method was developed for the determination of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in eggs. The new IL-PIPR adsorbent was prepared at room temperature, which avoids the disorder and instability of the template at high temperatures. The imprinting factor of IL-PIPR for PFOA and PFOS exceeded 7.3. DFE, combined with IL-PIPR (15 mg), was used to extract PFOA and PFOS from eggs within 15 min. The established method exhibits low limits of detection (0.01-0.02 ng/g) and high recoveries (84.7%-104.7%), which surpass those of previously reported methods. This work offers a new approach to explore advanced imprinted adsorbents for PFAAs, efficient sample pretreatment technique, and analytical method for pollutants in foods.

Synthesis of magnetic chitosan biopolymeric spheres and their adsorption performances for PFOA and PFOS from aqueous environment.

Due to numerous applications and excellent environmental stability, long-chain perfluorinated chemicals (PFCs) are ubiquitous in water across the world and adversely affect the living organisms. Thus, this study focused on the mitigation of the most frequently used long-chain PFCs namely perfluorooctanoate (PFOA) and perfluorooctane sulfonate (PFOS) from water using reduced graphene oxide modified zinc ferrite immobilized chitosan beads (rGO-ZF@CB) as an adsorbent. The results from the adsorption isotherm and kinetic studies revealed that the adsorption data fitted well to the Langmuir and the pseudo-second-order models. According to the Langmuir isotherm, the rGO-ZF@CB possessed the maximum adsorption capacity of 16.07 mg/g for PFOA and 21.64 mg/g for PFOS. Both the electrostatic attractions and hydrophobic interactions have driven the removal of PFOA and PFOS by prepared rGO-ZF@CB. Eventually, the rGO-ZF@CB could be considered as an efficient adsorbent for the effective removal of PFOA and PFOS molecules from the aqueous environment.

PFAS Degradation in Ultrapure and Groundwater Using Non-Thermal Plasma.

Perfluoroalkyl substances (PFAS) represent one of the most recalcitrant class of compounds of emerging concern and their removal from water is a challenging goal. In this study, we investigated the removal efficiency of three selected PFAS from water, namely, perfluorooctanoic acid (PFOA), perfluorohexanoic acid (PFHxA) and pefluorooctanesulfonic acid (PFOS) using a custom-built non-thermal plasma generator. A modified full factorial design (with 2 levels, 3 variables and the central point in which both quadratic terms and interactions between couple of variables were considered) was used to investigate the effect of plasma discharge frequency, distance between the electrodes and water conductivity on treatment efficiency. Then, the plasma treatment running on optimized conditions was used to degrade PFAS at ppb level both individually and in mixture, in ultrapure and groundwater matrices. PFOS 1 ppb exhibited the best degradation reaching complete removal after 30 min of treatment in both water matrices (first order rate constant 0.107 min-1 in ultrapure water and 0.0633 min-1 in groundwater), while the degradation rate of PFOA and PFHxA was slower of around 65% and 83%, respectively. During plasma treatment, the production of reactive species in the liquid phase (hydroxyl radical, hydrogen peroxide) and in the gas phase (ozone, NOx) was investigated. Particular attention was dedicated to the nitrogen balance in solution where, following to NOx hydrolysis, total nitrogen (TN) was accumulated at the rate of up to 40 mgN L-1 h-1.

Biochar sorption of PFOS, PFOA, PFHxS and PFHxA in two soils with contrasting texture.

The ability to immobilise PFAS in soil may be an essential interim tool while technologies are developed for effective long-term treatment of PFAS contaminated soils. Serial sorption experiments were undertaken using a pine derived biochar produced at 750 °C (P750). All experiments were carried out either in individual mode (solution with one PFAS at 5 µg/L) or mix mode (solution with 5 µg/L of each: PFOS, PFOA, PFHxS and PFHxA), and carried out in 2:1 water to soil solutions. Soils had biochar added in the range 0-5% w/w. Kinetic data were fitted to the pseudo-second order model for both amended soils, with equilibrium times ranging 0.5-96 h for all congeners. PFOS sorption was 11.1 ± 4.5% in the loamy sand compared to 69.8 ± 4.9% in the sandy clay loam. While total sorption was higher in the unamended loamy sand than sandy clay loam for PFHxA, PFOA and PFOS, the effect of biochar amendment for each compound was found to be significantly higher in amended sandy clay loam than in amended loamy sand. Application of biochar reduced the desorbed PFAS fraction of all soils. Soil type and experimental mode played a significant role in influencing desorption. Overall, the relationship between sorbent and congener was demonstrated to be highly impacted by soil type, however the unique physiochemical properties of each PFAS congener greatly influenced its unique equilibrium, sorption and desorption behaviour for each amended soil and mode tested.

Investigating isomers/enantiomers of perfluorooctanoic acid in river water by gas chromatography-mass spectrometry with chiral derivatization.

Perfluorooctanoic acid (PFOA) in environmental media contains numerous isomers/enantiomers because of the PFOA manufacturing process and biological degradation of PFOA precursors. Few methods for analyzing PFOA enantiomers have been described. A simple derivatization method using (S)-1-phenethyl chloride that was developed to allow PFOA isomers/enantiomers to be separated by gas chromatography and analyzed by electron-capture negative ionization mass spectrometry is described here. PFOA standards were analyzed, and enantiomers of the chiral isomers perfluoro-3-methyl-heptanoic acid, perfluoro-4-methyl-heptanoic acid, and perfluoro-3,5-dimethyl-hexanoic acid were separated using an HP-5MS column. Linear PFOA and perfluoro-6-methyl-heptanoic acid were chromatographically separated from these enantiomers. The linear ranges (giving correlation coefficients r > 0.997) of the calibration curves for the isomers were 0.010-3.00 ng/mL. PFOA isomer/enantiomer concentrations in river water were determined using the method. The method separated the enantiomers of perfluoro-3-methyl-heptanoic acid and perfluoro-4-methyl-heptanoic acid, the isomers of perfluoro-6-methyl-heptanoic acid, and linear PFOA in river water. No significant differences were found between the PFOA enantiomer/isomer compositions of the sample and technical PFOA. Enantiomer ratios can provide information about the sources and transport of pollutant isomers/enantiomers in the environment. Enantiomeric separation requires effective separation techniques. Our method achieved chiral separation using a non-chiral GC column that is often used in general analytical laboratories. The method could be used to investigate the sources and fates of PFOA and the isomers/enantiomers of other potentially toxic persistent pollutants in the environment and the risks posed to humans.

Diatom-assisted biomicroreactor targeting the complete removal of perfluorinated compounds.

Persistent perfluorinated compounds (PFCs) have been recognized as a global environmental issue. Developing methods without leading to additional burden in nature will be essential for PFCs removal. Herein, we functionalized iron nanoparticles on living diatom (Dt) to efficiently enable the Fenton reaction and reactive oxygen species (ROS) production. Iron nanoparticles at the surface of living diatom act as promising catalytic agents to trigger OH radical generation from H2O2. Dt plays dual roles: i) as solid support for effective adsorption, and ii) it supplies oxygen and inherently produces ROS under stress conditions, which improves removal efficiency of PFCs. We also demonstrated its reusability by simple magnetic separation and 85% of decomposition efficiency could still be achieved. This newly developed diatom-assisted bioremediation strategy enables green and efficient PFC decomposition and shall be readily applicable to other persistent pollutants.

Guanidinocalix[5]arene for sensitive fluorescence detection and magnetic removal of perfluorinated pollutants.

Perfluorinated alkyl substances, such as perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), are toxic materials that are known to globally contaminate water, air, and soil resources. Strategies for the simultaneous detection and removal of these compounds are desired to address this emerging health and environmental issue. Herein, we develop a type of guanidinocalix[5]arene that can selectively and strongly bind to PFOS and PFOA, which we use to demonstrate the sensitive and quantitative detection of these compounds in contaminated water through a fluorescent indicator displacement assay. Moreover, by co-assembling iron oxide nanoparticle with the amphiphilic guanidinocalix[5]arene, we are able to use simple magnetic absorption and filtration to efficiently remove PFOS and PFOA from contaminated water. This supramolecular approach that uses both molecular recognition and self-assembly of macrocyclic amphiphiles is promising for the detection and remediation of water pollution.

Novel chitosan-ethylene glycol hydrogel for the removal of aqueous perfluorooctanoic acid.

It is urgent to explore an effective removal method for perfluorooctanoic acid (PFOA) due to its recalcitrant nature. In this study, a novel chitosan-based hydrogel (CEGH) was prepared with a simple method using chitosan and ethylene glycol through a repeated freezing-thawing procedure. The adsorption of PFOA anions to CEGH agreed well to the Freundlich-Langmuir model with a maximum adsorption capacity as high as 1275.9 mg/g, which is higher than reported values of most adsorbents for PFOA. The adsorption was influenced by experimental conditions. Experimental results showed that the main removal mechanism was the ionic hydrogen bond interaction between carbonyl groups (COO-) of PFOA and protonated amine (NH+) of the CEGH adsorbent. Therefore, CEGH is a very attractive adsorbent that can be used to remove PFOA from water in the future.

Bubble-Nucleation-Based Method for the Selective and Sensitive Electrochemical Detection of Surfactants.

We present the first bubble-nucleation-based electrochemical method for the selective and sensitive detection of surfactants. Our method takes advantage of the high surface activity of surfactant analyte to affect the electrochemical bubble nucleation and then transduces the change in nucleation condition to electrochemical signal for determining the surfactant concentration. Using this method, we demonstrate the quantitation of perfluorinated surfactants in water, a group of emerging environmental contaminants, with a remarkable limit of detection (LOD) down to 30 µg/L and a linear dynamic range of over 3 orders of magnitude. With the addition of a preconcentration step, we have achieved the LOD: 70 ng/L, the health advisory for perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA) in drinking water established by the U.S. Environmental Protection Agency. The experimental results are in quantitative agreement with our theoretical model derived from classical nucleation theory. Our method also exhibits an exceptional specificity for the surfactant analytes even in the presence of 1000-fold excess of nonsurfactant interference. This method has the potential to be further developed into a universal electrochemical detector for surfactant analysis because of its simplicity and the surface-activity-based detection mechanism.

Identification of a non-host semiochemical from tick-resistant donkeys (Equus asinus) against Amblyomma sculptum ticks.

Amblyomma sculptum is a tick affecting animal and human health across Argentina, Bolivia, Paraguay and Brazil. Donkeys, Equus asinus, are known to be resistant to A. sculptum, suggesting that they can produce non-host tick semiochemicals (allomones), as already demonstrated for some other vertebrate host/pest interactions, whereas horses, Equus caballus, are considered as susceptible hosts. In this study, we tested the hypothesis that donkeys produce natural repellents against A. sculptum, by collecting sebum from donkeys and horses, collecting the odour from sebum extracts, and identifying donkey-specific volatile compounds by gas chromatography (GC) and coupled GC-mass spectrometry (GC-MS). From the complex collected blends, five main compounds were identified in both species. Hexanal, heptanal and (E)-2-decenal were found predominantly in donkey extracts, whilst ethyl octanoate and ethyl decanoate were found predominantly in horse extracts. One compound, (E)-2-octenal, was detected exclusively in donkey extracts. In Y-tube olfactometer bioassays 36 different A. sculptum nymphs were tested for each extract, compound and concentration. The dry sebum extracts and the compounds identified in both species induced neither attraction nor repellency. Only (E)-2-octenal, the donkey-specific compound, displayed repellency, with more nymphs preferring the arm containing the solvent control when the compound was presented in the test arm across four concentrations tested (p < 0.05, Chi-square test). A combination of a tick attractant (ammonia) and (E)-2-octenal at 0.25 M also resulted in preference for the control arm (p < 0.05, Chi-square test). The use of semiochemicals (allomones) identified from less-preferred hosts in tick management has been successful for repelling brown dog ticks, Rhipicephalus sanguineus sensu lato from dog hosts. These results indicate that (E)-2-octenal could be used similarly to interfere in tick host location and be developed for use in reducing A. sculptum numbers on animal and human hosts.

Removal of PFAS from aqueous solution using PbO2 from lead-acid battery.

Whilst advanced electrochemical oxidation can break down per- and polyfluoroalkyl substances (PFAS), the requirement for expensive electrode materials usually prevents its widespread application. Here we use an industrial material of lead peroxide (PbO2) from a lead-acid battery to break down PFAS including perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and 1H,1H,2H,2H-perfluorooctanesulfonic acid (6:2 FTS). By optimising the PbO2 panel (activating and doping) and working conditions including supporting electrolyte (1 L 10 mM Na2SO4), initial concentration (10 µM), temperature (room temperature), current density (5 A for a 10 cm × 10 cm PbO2 panel) etc., we successfully remove > 99% PFAS (individual PFAS monitored via HPLC-MS) whilst mineralising ∼59% PFOA (defluorination, F- released and monitored via F-ISE, fluoride-ion selective electrode). By studying the pseudo-first-order kinetics of the PFAS breakdown (0.0028-0.007 min-1) and defluorination (0.84-5.9 × 10-8 min-1), we assign the difference to the adsorption of PFAS on the PbO2 panel and the appearance of intermediates before the full defluorination. The leaked HF gas (∼10-5 M, collected using 0.25 L 0.1 M NaOH) and Pb2+ (∼12 µM, or ∼ 2.5 ppm) are also confirmed. This study employs an economic industrial material, highlights the contribution of adsorption towards the PFAS removal and breakdown, and identifies the possible leakage of secondary contaminants.

Peak AAA fatty acid homolog contaminants present in the dietary supplement l-Tryptophan associated with the onset of eosinophilia-myalgia syndrome.

The eosinophilia-myalgia syndrome (EMS) outbreak that occurred in the USA and elsewhere in 1989 was caused by the ingestion of Showa Denko K.K. (SD) L-tryptophan (L-Trp). "Six compounds" detected in the L-Trp were reported as case-associated contaminants. Recently the final and most statistically significant contaminant, "Peak AAA" was structurally characterized. The "compound" was actually shown to be two structural isomers resulting from condensation reactions of L-Trp with fatty acids derived from the bacterial cell membrane. They were identified as the indole C-2 anteiso (AAA1-343) and linear (AAA2-343) aliphatic chain isomers. Based on those findings, we utilized a combination of on-line HPLC-electrospray ionization mass spectrometry (LC-MS), as well as both precursor and product ion tandem mass spectrometry (MS/MS) to facilitate identification of a homologous family of condensation products related to AAA1-343 and AAA2-343. We structurally characterized eight new AAA1-XXX/AAA2-XXX contaminants, where XXX represents the integer molecular ions of all the related homologs, differing by aliphatic chain length and isomer configuration. The contaminants were derived from the following fatty acids of the bacterial cell membrane, 5-methylheptanoic acid (anteiso-C8:0) for AAA1-315; n-octanoic acid (n-C8:0) for AAA2-315; 6-methyloctanoic acid (anteiso-C9:0) for AAA1-329; n-nonanoic acid (n-C9:0) for AAA2-329; 10-methyldodecanoic acid (anteiso-C13:0) for AAA1-385; n-tridecanoic acid (n-C13:0) for AAA2-385; 11-methyltridecanoic acid (anteiso-C14:0) for AAA1-399; and n-tetradecanoic acid (n-C14:0) for AAA2-399. The concentration levels for these contaminants were estimated to be 0.1-7.9 µg / 500 mg of an individual SD L-Trp tablet or capsule The structural similarity of these homologs to case-related contaminants of Spanish Toxic Oil Syndrome (TOS) is discussed.

Fast and sensitive determination of per- and polyfluoroalkyl substances in seawater.

In this work, a novel, fast, and sensitive method was developed for perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS) and PFOS precursor's determination in seawater. The proposed method consists in a vortex-assisted liquid-liquid microextraction (VALLME) combined with liquid chromatography (LC) and LTQ-Orbitrap high resolution mass spectrometry (LTQ-Orbitrap HRMS) determination. Several parameters affecting both the HPLC-LTQ Orbitrap HRMS determination and the VALLME were studied, with special attention to blank contamination problem. The use of LTQ-Orbitrap-HRMS in full mode, quantifying the target analytes using the exact mass, provides a very powerful detection in terms of sensitivity and specificity maintaining all the information provided by the full mass spectra, allowing, also, the identification of non-target substances. The use of matrix-matched calibration, together with labelled surrogate standards, minimize matrix effects and compensate potential recovery losses, resulting in recoveries between 95 and 105%, with excellent sensitivity (quantitation limit between 0.7 and 6 ng L-1) and precision (4-10%). The proposed method requires only 35 mL of sample and 100 µL of extracting solvent, is fast and avoids the use of other solvents to obtain the dispersive cloudy solution, simplifying the procedure and improving the existing procedures for the determination of per- and polyfluoroalkyl substances (PFASs) in seawater in terms of green analytical chemistry. The method was successfully validated by participating in a proficiency test assay provided by the National Measurement Institute of the Australian Government for the determination of PFOA, total PFOS and linear PFOS in waters. A revision of the state of the art in the last twelve years of methods for the analysis of PFASs in seawater and other types of water was performed, and a critical comparison between the developed method and the previously published was included. Finally, the method was applied to the analysis of samples from Ría de Vigo, a sensitive and semiconfined coastal area located in the northwest of Spain. PFOS, N-methyl perfluorooctanesulfonamide (n-MeFOSA) and N-ethyl perfluorooctanesulfonamide (n-EtFOSA) were detected in samples at levels lower than the maximum allowable concentration (MAC) established by Directive 2013/39/EU, but above the annual average (AA) levels.

Removal of perfluorooctanoic acid in simulated and natural waters with different electrode materials by electrocoagulation.

Increasing attentions have been paid on widespread perfluorooctanoic acid (PFOA) contaminations in the environment globally, especially in the industrial wastewaters and natural water bodies. In order to perform the treatment of PFOA simulated solution effectively with periodically reverse electrocoagulation (PREC), intensive studies were implemented on the conditions of treatment and adsorption mechanism. The optimal conversion rate of 1 mg L-1 PFOA treatment could be achieved 99.6% with Al-Zn electrode, when the voltage and stirring speed were set to 9 V and 500 rmp. The energy consumption of treating PFOA simulated aqueous solution at 20 min using Al-Zn electrodes was 43.93 kWh kg-1. In addition, the PREC technique was further applied to eliminate the PFOA contaminations in the natural groundwater, generating the conversion rate up to 79.4% at 60 min. Moreover, it was verified that PFOA contamination was adsorbed on the flocs of Zn0.61Al0.39(OH)2(CO3)0.195·xH2O by the detection of X-ray diffraction spectra (XRD) and Fourier transform infrared (FTIR) spectrum, the mainly mechanism was adsorption bringing and enmeshment, primarily resulting from the hydrophobic interaction of PFOA and Al-Zn hydroxide flocs.

Rapid and high-capacity adsorption of PFOS and PFOA by regenerable ammoniated magnetic particle.

Adsorption is well accepted as an effective method for perfluorinated compounds' (PFCs) removal from water among various conventional methods. However, development of adsorbents that combine good performance of PFC removal and regenerability has not yet been realized. This work demonstrated the fabrication and application of an ammoniated magnetic adsorbent for efficient and economical PFOS and PFOA removal. Functional ammonium groups and γ-Fe2O3 were effectively incorporated in the particle with the proposed method. These fabricated magnetic particles presented superior adsorption performance for PFOS and PFOA with short equilibrium time of 120 min and high adsorption capacity. The isotherms revealed that the adsorption process belonged to multilayer sorption with their intricate interactions including anion exchange and hydrophobic interaction. The magnetic particle maintained its removal efficacy over a wide pH range of 3-9 or with coexisting substances. Moreover, the regeneration and reuse of the magnetic particle were successfully carried out with PFOS and PFOA removal efficiency sustained higher than 80% in 15 consecutive treatment cycles. Along with the efficient adsorption and easy separation of adsorbents, we expect that this ammoniated magnetic particle can serve as an excellent alternative for PFOS and PFOA removal from water.

Synthesis and evaluation of molecularly imprinted polymers with binary functional monomers for the selective removal of perfluorooctanesulfonic acid and perfluorooctanoic acid.

This work describes a novel method for the synthesis of molecularly imprinted polymers (MIPs) using 2-(trifluoromethyl) acrylic acid (TFMAA) and 4-vinyl pyridine (4-Vpy) as binary functional monomers, perfluorooctanoic acid (PFOA) as template, and ethyleneglycol dimethacrylate (EGDMA) as cross-linker in the presence of azobisisobutyronitrile (AIBN). The binary functional monomer MIPs were applied to selective recognition for PFOA and perfluorooctanesulfonic acid (PFOS) from aqueous environment. The MIPs were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and microscopic electrophoresis. Thereafter, the adsorption capacity and selectivity of the synthesized MIPs for PFOA and PFOS were evaluated by batch adsorption experiments. The maximum adsorption capacities of the MIPs for PFOA and PFOS were 6.42 and 6.27mg/g, respectively. It was also found that the adsorption capacities remained constant with increasing the solution pH in the range of 2.0-5.0, and then decreased when the pH was further increased. Finally, the novel MIPs can be reused after five cycles of adsorption-desorption-adsorption with no significant decrease of removal rate and have an effective performance in selective removal of PFOA and PFOS in real lake water samples. All the results indicate that the binary functional monomer MIPs have great potential to remove PFOA and PFOS in aqueous environment.

MEKC-UV as an effective tool for the separation and identification of explosives, high explosives, and their degradation products in environmental samples.

MEKC has been used in conjunction with UV detection for identification and quantitation of high explosives in environmental samples. To ensure the compatibility of the technique with ESI-MS, perfluorooctanoic acid (PFOA), a volatile micelle, was used. Separation of EPA Method 8330 Mixes A and B using various concentrations of the micelle showed that the 80 mM solution of PFOA was the optimum concentration for the separation of the explosives. MEKC analysis of explosives with ESI-MS under optimum micelle concentration provided excellent results indicating the compatibility of the method with ESI-MS. Finally, the MEKC-UV method was applied to the detection and quantitation of explosives in various environmental samples including water, sand, and soil. The results demonstrate that the MEKC method described herein is a viable technique for detection of explosives in environmental samples using UV detection, while maintaining the compatibility of the technique with MS detection without any modification to the separation method, if laboratories decided to pursue this route in the future.

Micro-solid phase extraction of perfluorinated carboxylic acids from human plasma.

Micro-solid phase extraction (µ-SPE), with liquid chromatography-tandem mass spectrometry has been developed for the determination of trace levels of perfluorinated carboxylic acids (PFCAs) in human plasma. The µ-SPE sorbent was surfactant-templated mesoporous silica. Extraction time, desorption time and salt concentration were chosen as the most effective parameters and were optimized simultaneously by use of central composite design. Under the optimized extraction conditions, good linearity in the range of 100 and 5000ngL(-1) was obtained with coefficients of determination of between 0.986 and 0.995. The limits of detection (at a signal to noise ratio of 3) were measured to be in the range of between 21.23 and 65.07ngL(-1), and limits of quantification (at a signal to noise ratio of 10) were in the range of between 70.77 and 216.92ngL(-1). The relative recoveries of spiked PFCAs in different samples were in the range of between 87.58 and 102.45%. As expected from the global distribution of PFCs, contaminations at low levels (less than 200ngL(-1)) were detected (with the highest concentration recorded for perfluorooctanoic acid (PFOA)). Considering the complex nature of biological samples and the issue of matrix effects in the analysis of PFCAs, µ-SPE as an extraction method was shown to be advantageous; it combined extraction and concentration in one single step with no additional sample clean-up, and was able to remove significant matrix interferences.

Reversible and irreversible sorption of perfluorinated compounds (PFCs) by sediments of an urban reservoir.

Uncertainty about the extent to which contaminant sorption by suspended solids and bed sediments is irreversible is a major impediment for modeling and managing the water quality of surface water resources. This study examined reversible and irreversible sorption of several perfluorinated compounds (PFCs) to bed sediments from an urban reservoir. PFCs investigated include C4, C6, C8, C9 and C10 perfluoroalkanoate homologues (PFBA, PFHxA, PFOA, PFNA and PFDA, respectively) and perfluorooctane and hexane sulfonate (PFOS and PFHxS, respectively). Although sorption branches of the PFOS, PFNA and PFDA isotherms were nearly linear (implying a partitioning-like process), desorption experiments indicated that a fraction of the sorbed PFCs were entrapped and resistant to desorption. The hysteretic desorption branches were approximately linear. Irreversibility increased with chain length and was nearly complete for PFDA (thermodynamic irreversibility index (TII) 0.98). For the weakly sorbing PFOA and PFHxS, sorption was largely reversible. Data suggest that (1) for the strongly sorbing PFCs, e.g. PFNA, PFDA and PFOS, bed sediments acted predominantly as irreversible sinks, (2) aqueous concentrations of the moderately sorbing PFCs (PFOA and PFHxS) are buffered by reversibly sorbing suspended solids, and (3) the short-chain PFCs (PFBA and PFHxA) are not significantly sorbed and therefore not expected to be significantly influenced by sediment transport. Situations in which highly contaminated particles entering relatively clean water bodies, equilibrium is approached from the reverse (desorption) direction. For irreversibly sorbed contaminants field-based K(D) values will be higher than the K(D) values derived from laboratory sorption data obtained from forward sorption experiments.

Determination of perfluoroalkylated substances (PFASs) in drinking water from the Netherlands and Greece.

In the present study 11 perfluoroalkylated substances (PFASs) were analysed in drinking tap water samples from the Netherlands (n = 37) and from Greece (n = 43) by applying LC-MS/MS and isotope dilution. PFASs concentrations above the limit of quantification, LOQ (0.6 ng/l) were detected in 20.9% of the samples from Greece. Total PFAS concentrations ranged between 8) were only rarely detected. In the drinking water samples from the eastern part of the Netherlands, where drinking water is sourced from groundwater reservoirs, no PFASs were detected. This demonstrates that exposure to PFASs through drinking water in the Netherlands is dependent on the source. Additionally, five samples of bottled water from each country were analysed in the current study, with all of them originating from ground wells. In these samples, all PFASs were below the LOQ.