Intramammary treatment of clinical mastitis quarters with ceftiofur does not cause anbiotic residues in adjacent untreated quarters.

The study was carried out in dairy cows to elucidate whether treatment of clinical mastitis quarters with Spectramast® LC (ceftiofur hydrochloride, 125 mg, Zoetis) created a reason for discarding milk from adjacent untreated healthy quarters. The antibiotic was infused once daily in the affected mammary quarter for four days. Forty-nine cows were evaluated after diagnosis of clinical mastitis in three or fewer udder quarters. In all cases, quarters that did not receive treatment had milk samples collected one day after the end of treatment. All milk samples from untreated quarters were below the maximum permissible limit for the presence of antibiotic residues after analysis with the BetaStar S Combo test. Pharmacokinetic and pharmacodynamic characteristics may explain this finding. We conclude that it is feasible to use milk from untreated quarters of animals that have been treated with Spectramast® LC. We also reiterate the need to carry out tests with other pharmacological bases, and that the results found in this experiment cannot be extrapolated to other drugs.Dairy cattle have considerable importance in the development of the Brazilian economy, being directly linked to economic and social progress. In the first half of 2020, 12.1 billion liters of milk were produced in Brazil and in 2019, there was a new record of 25.01 billion liters produced (IBGE, 2020). This production comes from a wide variety of production systems, coming from smallholder farmers as well as from large companies that use the latest technologies available on the market. Dairy production is a complex activity. For one to obtain economical success, several aspects must be monitored. Maintaining the health of animals is a top priority, and the literature suggests that various diseases are a common challenge for dairy producers. Mastitis is the main disease that affects dairy cows, responsible for considerable economic loss and significant zootechnical and productive challenges (Ruegg, ). It is considered the second leading cause of cow culling in dairy herds, behind reproductive problems. Mastitis is characterized by infection of the mammary gland and may or may not occur with inflammation, generating changes in the mammary tissue and properties of the milk. It is classifield into clinical or subclinical mastitis, according to presence or absence of clinical signs, and into contagious or environmental based on the causative agent (Correa et al., ).

Optimization of a Solid-Phase Extraction Coupled with a High-Performance Liquid Chromatography and Diode Array Ultraviolet Detection Method for Monitoring of Different Antibiotic Class Residues in Water Samples.

BACKGROUND: The increased use of cephalosporin antibiotics in the last few years as well as the detection of their residues in wastewater treatment plants and hospital wastewater poses a risk for infiltration of their residues into environmental water samples. OBJECTIVE: A simplified, sensitive, and convenient solid-phase extraction (SPE) procedure coupled with either HPLC or fast HPLC methods with diode array detection was developed and validated to screen the residues of six different cephalosporin antibiotics: cefoperazone, cefipime, ceftazedime, ceftriaxone, cefdinir, and cefotaxime, along with amoxicillin, levofloxacin, and ciprofloxacin in water samples. METHODS: An HPLC-diode array detector (HPLC-DAD) method and a fast HPLC method, based on a core-shell stationary phase, were developed for the fast screening of the antibiotic compounds. In addition, the SPE step was optimized to enable the extraction of the studied drugs with high accuracy of the recovered amounts of residues. RESULTS: The method sensitivity was enhanced by the coupling of SPE with HPLC-DAD and fast HPLC to achieve low LODs; from 0.2 to 3.8 ng/mL and from 0.65 to 12.2 ng/mL, respectively. The developed methods were augmented by LC-MS/MS determination for confirmation of identity and quantity of any positively identified sample. The method was applied to the analysis of water samples collected from a rural site. In Addition, an example application of cleaning validation of cefotaxime-contaminated stainless-steel surfaces was provided. CONCLUSION: The method's simplicity and high sensitivity encourage its application in monitoring of antibiotic residues in different types of water samples such as environmental samples and samples from cleaning validation activities. HIGHLIGHTS: HPLC-DAD and fast HPLC methods were developed for separation of nine different antibiotics. The combination with the SPE procedure achieved low detection limits; from 0.2 to 3.8 ng/mL for SPE-HPLC-DAD and from 0.65 to 12.2 ng/mL for SPE-fast HPLC.

Development of Magnetic Molecularly Imprinted Polymer Coupled Nanospray Ion Source for Analysis of Cephalosporin Antibiotics in Food Samples.

A magnetic molecularly imprinted polymer (MMIP) coupled nanospray ion source was developed for analysis of cephalosporin antibiotics in food samples. MIP coated Fe3O4 nanospheres were prepared for magnetic solid-phase extraction (MSPE) of the antibiotics in the extract of samples and then integrated into the nanospray capillary for further desorption and mass spectrometry analysis. The developed device combines the advantages of high extraction efficiency of MSPE, unique selectivity of MIPs, and fast analysis speed of ambient ionization mass spectrometry (AIMS). Five cephalosporin antibiotics in milk, egg, and beef samples were analyzed using the developed methods. High sensitivities with limits of detection (LODs) from 0.3 to 0.5 µg kg-1 were achieved for cephalosporin antibiotics in milk, egg, and beef samples, respectively. Good linearity, determination coefficient values (R2 > 0.992), and precision (RSD < 15%) with recoveries ranging from 72.6% to 115.5% were obtained using the spiked milk, egg, and beef sample matrices.

Validation of the AnticFast® Beta-Lactams Rapid Test Kit for Detection of Beta-Lactams (Penicillins and Cephalosporins) in Raw Cow's Milk: AOAC Performance Tested MethodSM 032303.

BACKGROUND: AnticFast® Beta-Lactams Rapid Test Kit is a qualitative two-step (2 min + 5 min) rapid lateral flow assay to detect ß-lactam (penicillins and cephalosporins) antibiotic residues in raw commingled cow's milk. OBJECTIVE: The method performance was evaluated according to Commission Decision 2002/657/EC, Commission Implementing Regulation 2021/808, and Community Reference Laboratories Residues Guidelines for the Validation of Screening Methods for Residues of Veterinary Medicines. METHODS: The AnticFast Beta-Lactams Rapid Test Kit was evaluated for detection capability, selectivity, false-positive results, repeatability, robustness, suitability for various milk types and milk compositions, milks from various species, and test kit consistency and stability. Samples included milks spiked at concentrations bracketing the EU maximum residue limits (MRLs) for ß-lactams as well as bulk farm and tanker milks. RESULTS: The AnticFast Beta-Lactams Rapid Test Kit is specific for the detection of ß-lactams in milk and does not detect compounds from other antibiotic families. Interference was seen with clavulanic acid, a ß-lactamase inhibitor, which was expected. The test can detect all residues of ß-lactams (penicillins and cephalosporins) present on the EU-MRL list for milk at their respective MRL except for desfuroylceftiofur and cephalexin, which were above the MRL. No false positives were detected in the 602 (300 blank farm and 302 tanker load) samples tested. Robustness testing indicated that the detection in heat-treated milk types may be slightly hampered. For substances with a detection capability well below the MRL, this interference does not cause problems since detection at MRL remains guaranteed, but care should be taken for substances with a CCß at or near their MRL. Diminished sample flow was seen with reconstituted milk powder and blank ewes' milk, so sample flow should always be verified for these milk types. CONCLUSIONS: Results of this validation show that the AnticFast Beta-Lactams Rapid Test Kit is a reliable test for rapid screening of raw cows' milk for residues of ß-lactam antibiotics. HIGHLIGHTS: AnticFast Beta-Lactams Rapid Test Kit is an easy, realiable, robust and highly specific test for screening of raw cows' milk for residues of penicillins and cephalosporins.

Quantification of 16 cephalosporins in the aquatic environment by liquid chromatography-tandem mass spectrometry.

Antimicrobial agents are essential to protect human and animal health. During the coronavirus disease 2019 pandemic, antimicrobials such as cephalosporins were widely used as prophylactics and to prevent bacterial co-infection. Undoubtedly, the prevalence of antibiotics in the aquatic environment will ultimately affect the degree of resistance against these bacteria in animals and the environmental systems. In order to monitor 16 cephalosporins in the aquatic environment, we developed a new liquid chromatography-tandem mass spectrometry method that functioned simultaneously under positive and negative electrospray ionization switching modes. The chromatographic separation has been implemented using a pentafluorophenyl propyl column kept at 40°C. The limits of detection and quantitation for the studied cephalosporins ranged from (8 × 10-4 ) to (7.11 × 10-2 ) ng/ml and from (2.61 × 10-3 ) to (2.37 × 10-1 ) ng/ml, respectively. The percent extraction efficiency (apparent recovery) and relative standard deviations for the analyzed cephalosporins ranged from 61.69% to 167.67% and 2.45% to 13.48%, respectively. The overall findings showed that the effluent from the wastewater treatment plants that receive wastewater from pharmaceutical factories had a higher detected amount of cephalosporins than that of domestic sewage. Moreover, seven cephalosporins, including cefuroxime, ceftazidime, cefradine, cefprozil, cefixime, cefalexin, and cefadroxil (0.68-105.45 ng/L) were determined in the aquatic environment.

Preparation of monoclonal antibody and development of an enzyme-linked immunosorbent assay for the detection of ceftiofur in animal-derived foods.

Ceftiofur (CEF) residues in animal-derived foods are of great concern to farmers, regulatory agencies and consumers. In this study, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) method was established to quickly monitor CEF residues in edible animal tissues using an easy sample preparation procedure. A monoclonal antibody, 4D5, against CEF has been produced at first, which had IC50 values for CEF, ceftriaxone, cefquinome, cefotaxime and desfuroylceftiofur of 0.78 µg/L, 0.73 µg/L, 13.6 µg/L, 8.99 µg/L and 8.89 µg/L, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) in artificially contaminated animal-derived foods were 0.12-0.19 µg/L and 0.20-0.30 µg/L. The recovery rates were in the range of 89.7-109.0%. The CVs were less than 6.7%. A good correlation (R= 0.9994) between the ic-ELISA and UPLC-MS/MS showed the reliability of the developed ic-ELISA. The ic-ELISA produces a sensitive, accurate and low-cost tool for the screening of residues of CEF in animal-derived foods.

A highly sensitive and selective method for the determination of ceftiofur sodium in milk and animal-origin food based on molecularly imprinted solid-phase extraction coupled with HPLC-UV.

The effective analysis of cephalosporin antibiotics in food animals has attracted considerable attention. Herein, a high-performance liquid chromatograph equipped with a UV method based on molecularly imprinted-solid phase extraction (MISPE-HPLC-UV) was developed for preconcentration, cleanup and determination of ceftiofur sodium (CTFS) in food samples. In this method, an eco-friendly molecularly imprinted polymer (MIP) was synthesized and employed as an adsorbent, which exhibited excellent selectivity towards CTFS in water, and adsorption equilibrium could be reached within 1 h. Under the optimized conditions, good linearity was obtained for CTFS in the range of 0.005-1.0 mg L-1 with a lower LOD of 0.0015 mg L-1, and the average recoveries were higher than 91.9% (RSD less than 8.5%) at three spiked levels in milk, chicken, pork and beef samples. After 20 cycles, the recovery of the MISPE cartridge for CTFS was still higher than 95%, which proved that the MISPE-HPLC-UV method was highly sensitive and selective for the analysis of CTFS in food samples.

Progress in Pretreatment and Analysis of Cephalosporins: An Update Since 2005.

Cephalosporins, one of the classic ß-lactam antibiotics, has been widely concerned by global population as the most commonly used broad-spectrum antibiotic. Serious health hazards are possible to be posed by quality control problems caused by its unstable structure, as well as food and environmental pollution introduced by improper use. Given the reasons above, the sensitive and valid methods for monitor and determination of cephalosporins in different matrices are urgently required. This review aims to provide a comprehensive overview on the current status of the pretreatment and analysis methods of cephalosporins in bulk drug, pharmaceutics, animal-derived foodstuffs including eggs, milk, meat, environment samples, and biological samples. Pretreatment methods including simple steps (protein precipitation, centrifugation, filtration), liquid-liquid extraction, solid phase extraction, QuECHERS, and detection methods covering LC, LC-MS/MS, voltammetric sensor, capillary electrophoresis spectroscopy, biological methods from January 2005 to October 2018 are updated, elaborated and compared here. Moreover, advanced materials and prospects for development are discussed. HighlightsDetermination of cephalosporins in different newly found matrix are represented.Comparisons between different mass analyzers and progress in HRMS methods are in detailed.Optimization of experimental conditions are discussed.Newly emerged eco-friendly methods are introduced.

Sensitive and Fast Determination of Ceftiofur in Honey and Veterinary Formulation by HPLC-UV Method with Pre-column Derivatization.

A novel, sensitive and rapid high performance liquid chromatography (HPLC) method for the determination of ceftiofur by pre-column derivatization with 1,2-naphthoquinone-4-sulfonate. Analysis was performed within 5 min on a Kinetex C18 column based on core-shell technology. The mobile phase composed of acetonitrile-water (50:50, v/v) pumped isocratically at a flow rate of 1.0 mL/min under UV detection at 254 nm. The factors affecting the derivatization reaction and separation conditions were carefully evaluated and optimized. The method was linear over the concentration range of 45-450 ng/mL with a limit of detection of 3.29 ng/mL and limit of quantitation of 10.97 ng/mL. The new method was successfully applied for the analysis of ceftiofur in the veterinary formulation and honey with average recoveries of 100.78% and 98. 83%, respectively. The present method is suitable and favorable for the analysis of ceftiofur on account of its sensitivity, rapidity and cost-effectiveness. In addition, it could have significant application for the determination of ceftiofur in other food products.

A Novel and Sensitive LC-MS/MS Method for the Quantitation of Ceftiofur in Pharmaceutical Preparations and Milk Samples.

INTRODUCTION: In the present study, a sensitive and selective liquid chromatographytandem mass spectrometry (LC-MS/MS) method was described for the determination of ceftiofur (CEF) in cow milk and pharmaceutical preparations. CEF is an antibiotic compound, which is commonly used in the treatment of animal diseases such as respiratory system, soft tissue, and foot infections, as well as postpartum acute puerperal metritis. One of the critical features of CEF is its prescription while breastfeeding cows; in accordance, its quantitative estimation is essential to assess its residual amounts. METHODS: In the method reported herein, after simple protein precipitation using acetonitrile, the pre-treated samples were introduced into an LC-MS/MS instrument equipped with a Chromolith® High-Resolution RP-18 series HPLC column (100 mm × 4.6 mm from Merck KGaA, Germany). Electrospray ionization was employed as the ionization source in the triple-quadrupole tandem mass spectrometer. RESULTS: For the calibration method using solvent-based standards, LOQ was 3.038 ng/mL, 12.15 ng/mL, and LOD was 1.215 ng/mL and 6.076 ng/mL for ESI+ and ESI- modes, respectively. On the other hand, for the method of matrix-matched standards, LOQ was 1.701 ng/mL, 10.13 ng/mL, and LOD was 0.486 ng/mL and 5.929 ng/mL for ESI+ and ESI- modes, respectively as obtained from signal to noise ratio. CONCLUSION: Applicability of both positive and negative ion modes was tested, and the analyte was detected via multiple reaction monitoring. The distorting effects of the milk matrix on the MS ionization and quantitation of CEF were overcome by using matrix-matched calibration for the first time.

Quantitation of plasma and biliary cefpiramide concentrations in human samples using high-performance liquid chromatography.

Cefpiramide is frequently used to treat biliary infections. However, no bioanalytical method has been validated to quantitate cefpiramide in human samples, particularly in bile. Therefore, this study was conducted to develop a simple, selective and validated high-performance liquid chromatographic method to determine cefpiramide in human plasma and bile. A protein precipitation procedure was used to extract cefpiramide and cefoperazone (internal standard, IS) from 200 µl of plasma and bile. Utilizing a Capcell Pak C18 column (4.6 × 250 mm), cefpiramide and IS were separated using the timed-gradient mobile phase consisting of 0.1 m sodium acetate (pH 5.2) and acetonitrile at a flow rate of 1 ml/min with photodiode array detector (wavelength set at 273 nm). The calibration curves showed linearity at concentrations ranging from 1 to 150 µg/ml in both plasma and bile (r2 > 0.999). The within- and between-run coefficients of variation (CVs) for plasma samples were 0.570-4.43 and 1.10-2.76%, respectively; for bile samples, the within- and between-day precision (CV) was 0.814-6.34 and 2.05-4.00%, respectively. Our newly developed bioanalytical method was successfully employed to quantify cefpiramide concentrations in both plasma and bile at multiple time points in patients with acute cholangitis.

Ceftolozane-tazobactam in an elastomeric infusion device for ambulatory care: an in vitro stability study.

Objectives: Published in vitro stability data for ceftolozane-tazobactam supports intermittent short duration infusions. This method of delivery is not feasible for many outpatient antimicrobial therapy services that provide only one or two visits per day. This study aimed to assess time, temperature and concentration-dependent stability of ceftolozane-tazobactam in an elastomeric infusion device for continuous infusion across clinically relevant ranges encountered in outpatient antimicrobial therapy. Methods: Ceftolozane-tazobactam was prepared to achieve initial concentrations representing total daily doses for 'renal', 'standard' and 'high' dose schedules in elastomeric infusion devices with a volume of 240 mL. Infusion devices incubated at room and body temperature were serially sampled over 48 hours. Refrigerated infusion devices were sampled over 10 days. Concentrations of ceftolozane and tazobactam were separately quantified using a validated ultra-high performance liquid chromatography-photodiode array method. Results: The greatest loss of ceftolozane occurred at 37°C, however, stability remained above 90% at 24 hours. Tazobactam was more stable than ceftolozane under these conditions. There was minimal loss at 4°C for either component over 7 days. Conclusions: Ceftolozane-tazobactam is suitable for ambulatory care delivered as a continuous infusion via an elastomeric infusion device.

Development of a highly efficient decontamination approach for ceftolozane in the pharmaceutical manufacturing environment.

The ß-lactam core is a key structure responsible for inducing both IgE-mediated acute-onset hypersensitivity and T-cell-mediated delayed-onset hypersensitivity with penicillins in humans. There is essentially no clinically significant immunologic cross-reactivity noted between the ß-lactam cores of penicillins and cephalosporins based on challenge studies in humans. The side-chains appear to be more important in inducing IgE-mediated acute-onset hypersensitivity and T-cell delayed-onset hypersensitivity with cephalosporins in humans. Despite these clinical findings, the U. S. Food and Drug Administration (FDA) still requires the level of ß-lactam-related antibiotic residues to be controlled at very low levels in manufacturing facilities. Ceftolozane is Merck & Co., Inc., Kenilworth, NJ, USA's (MSD's) 5th generation broad spectrum cephalosporin antibiotic against gram-negative bacteria. In searching for the optimal decontamination method of ceftolozane, most methods were found to be very slow in opening the ß-lactam ring in ceftolozane. Moreover, most of the previously reported decontamination methods applied analytical methods that only monitored the disappearance of the parent molecule as the endpoint of degradation. In this way, many of the ß-lactam-containing degradation products could be overlooked. In order to develop an efficient decontamination solution for ceftolozane, a sensitive ultra high performance liquid chromatography-high resolution-electrospray ionization-tandem mass spectrometry (UHPLC-HRMS/MS) method was first developed to ensure the detection of the ß-lactam ring in all degradation products. Through online UHPLC-UV-HRMS monitoring, 2.5 N KOH in 50% aqueous MeOH or 50% aqueous EtOH was identified as the best condition to fully degrade the ß-lactam ring in ceftolozane. This decontamination could be done within 15 min, even at 100 mg/mL concentration, and thus enable a quick turnaround time for equipment cleaning in the ß-lactam manufacturing facility. This method was also successfully applied to 12 other commercially available ß-lactam antibiotics.

A nanosorbent consisting of a magnetic molecularly imprinted polymer and graphene oxide for multi-residue analysis of cephalosporins.

A nanosorbent composed of magnetite nanoparticles, graphene oxide and a molecularly imprinted polymer (Fe3O4@SiO2-NH2/GOx/MIP) was synthesized and applied to simultaneous extraction of cephalexin, cefazolin and cefoperazone from milk. The use of magnetite nanoparticles enables fast extraction by using an external magnet. The use of graphene oxide increases extraction affinity, and the MIP improves selectivity. Extraction efficiency was optimized by investigating the effects of the template-to-monomer and cross-linker ratios, the desorption condition, extraction time, salting-out effect, stirring rate, sample volume and amount of adsorbent. The cephalosporins were quantified by using HPLC. Under optimum condition, the linear range of the method extends from 2.5 to 100 µg L-1 for cephalexin and cefazolin, and from 5.0 to 100 µg L-1 for cefoperazone. The limits of detection are 2.5 µg L-1 for cephalexin and cefazolin, and 5 µg L-1 for cefoperazone. The adsorbent was applied to the extraction of cephalosporins from milk, with recoveries in a range from 80.2 to 111.7% and with RSDs of <8.5%. Graphical abstractSchematic representation of a nanocomposite adsorbent consisting of magnetic molecularly imprinted polymer and graphene oxide (GOx). Integrating of magnetite nanoparticles, GOx and high specificity of MIP, the method exhibited a rapid, high extraction efficiency, good selectivity for multi-residue analysis of cephalosporins.

Evaluation of four commercial tests for detecting ceftiofur in waste milk bulk tank samples.

The objective of this study was to identify factors affecting the accuracy of four commercial tests for ceftiofur drug residue in milk samples from bulk tank waste milk (WM). WM samples were collected from 12 California dairy farms which were initially tested using liquid chromatography (LC-MS/MS) to confirm their negative status for drug residues above the FDA established tolerance/safe levels. The milk samples were also tested for fat, protein, lactose, solids non-fat (SNF), somatic cell count (SCC), coliform count, and standard plate count (SPC). Each WM sample was divided into two aliquots, one labeled as negative for drug residues (WMN) and the second spiked with ceftiofur as positive for ceftiofur residues (WMPos). Both types of WM samples were tested to evaluate the performance of 4 commercially available tests: Penzyme® Milk Test, SNAP® ß-lactam, BetaStar® Plus and Delvo SP-NT®. Three assays in triplicates for the WMN and WMPos were conducted for each WM sample. Test were evaluated using sensitivity, specificity, positive predictive value, negative predictive value and positive likelihood ratio. Kruskal-Wallis method was used to evaluate the effect of milk quality parameters on true positive (TP) and false negative (FN) test results. All WMPos samples were identified as positive by all four tests, rendering 100% sensitivity for each test. The specificity for Penzyme, BetaStar, Delvo, and SNAP tests were 59.2, 55.5, 44.4, and 29.6, respectively. Overall, all tests correctly identified samples with ceftiofur residues (WMPos), as shown by 100% sensitivity. Greater variability was observed regarding identification of samples free of any drug residue, with Penzyme and BetaStar having the highest risk for correctly identifying TN samples. Our findings indicate that when selecting commercial tests to detect drug residues in WM, milk quality parameters must be considered if the aim is to reduce FP test results.

Residue concentration of cefquinome taking into account different milk fractions and comparing the performance of two screening tests.

This Research Communication describes the residue concentration of a dry cow antibiotic in two different milk fractions and describes effects of milk fraction and milk composition on the test performance of a rapid screening and a microbial inhibitor test. Thirteen dry cows were treated with an intramammary dry cow antibiotic containing 150 mg cefquinome. Quarter foremilk and stripping samples were collected on the first 10 d postpartum. All milk samples were analyzed for milk composition by the local Dairy Herd Improvement Association and were tested for antibiotic residues using the rapid screening test Milchtest BL and the microbial inhibitor test Delvotest BR Brilliant Plates. The residue concentration of cefquinome was determined in foremilk and stripping samples from milkings 1, 2, 3, 5, and 7 after calving using high performance liquid chromatography - tandem mass spectrometry. The logarithm of cefquinome concentration (logCef) was higher in foremilk than in stripping samples and higher in milk samples with lower lactose content. Furthermore, logCef decreased with the number of milkings (P < 0.001). The Milchtest BL was more likely to be not evaluated (i.e. no test and control line or no control line appeared) in stripping samples and milk samples with higher protein content. In the Delvotest BR Brilliant Plates milk samples with higher protein content were more likely to have a false positive result (i.e. the screening test result was positive, but the HPLC-MS/MS result was below the detection limit of the screening test). These results indicate that foremilk is the recommended milk fraction to be tested for residues of cefquinome and that a high protein content can be a cause of test failure and false positive results when milk during the first 10 d postpartum is tested for antibiotic residues using screening tests.

Structural elucidation of a dimeric impurity in the process development of ceftolozane using LC/HRMS and 2D-NMR.

Ceftolozane is MSD's 5th generation cephalosporin antibiotic with broad-spectrum gram-negative activity. While refining the synthetic route to the drug substance, a dimeric impurity was observed in the final active pharmaceutical ingredient (API) of ceftolozane. Through impurity enrichment and preparative isolation, the structure of the impurity was subsequently established through LC/HRMS, HRMSMS, H/D exchange and 2D-NMR studies. A kinetic study of the impurity formation was conducted to determine the best conditions to control it in the final chemical process.

Chemometrics for resolving spectral data of cephalosporines and tracing their residue in waste water samples.

Chemometrics approaches have been used in this work to trace cephalosporins in aquatic system. Principal component regression (PCR), partial least squares (PLS), multivariate curve resolution-alternating least squares (MCR-ALS), and artificial neural networks (ANN) were compared to resolve the severally overlapped spectrum of three selected cephalosporins; cefprozil, cefradine and cefadroxil. The analytical performance of chemometric methods was compared in terms of errors. Artificial neural networks provide good recoveries with lowest error. Satisfactory results were obtained for the proposed chemometric methods whereas ANN showed better analytical performance. The qualitative meaning in MCR-ALS transformation provided very well correlations between the pure and estimated spectra of the three components. This multivariate processing of spectrophotometric data could successfully detect the studied antibiotics in waste water samples and compared favorably to alternative costly chromatographic methods.

A non-targeted LC-HRMS approach for detecting exposure to illegal veterinary treatments: The case of cephalosporins in commercial laying Hens.

Cephalosporins are of particular importance in human medicine and should be reserved for second-line curative treatment in the veterinary field to avoid any emerging antimicrobial resistance. Due to misuse of ceftiofur in the poultry sector in France, it is now recommended to completely stop using cephalosporins in this sector. Methods currently used for the control of veterinary practices are mostly based on liquid chromatography coupled to mass spectrometry in a targeted mode, including parent compounds and any major metabolites. The aim of the present study was to evaluate the relevance of untargeted metabolomic approaches to highlight a possible exposure of laying hens to cephalosporins using a predictive model including selected treatment biomarkers. An experimentation carried out on living animals involved the administration of cefquinome and ceftiofur. Three biological matrices-droppings, eggs and liver-were investigated. Metabolites were extracted and analysed by liquid chromatography coupled to high resolution mass spectrometry in a full scan mode. Metabolites impacted by the treatment were selected by using univariate and multivariate statistical analyses. Predictive models built from the potential biomarkers selected in the "droppings" matrix were validated and able to classify "treated" and "control" hens. PLS-DA and logistic regression models were compared and both models gave satisfactory results in terms of prediction. Results were of less interest for other matrices in which only biomarkers of exposure to cefquinome were detected.

Effect of thermal treatment of whey contaminated with antibiotics on the growth of Kluyveromyces marxianus.

The objective of the studies reported in this research communication was to investigate the use of whey contaminated with antibiotics such as cephalosporins, quinolones and tetracyclines as a nutrient medium for the growth of Kluyveromyces marxianus with particular attention to the effect of thermal treatment used to overcome the inhibitory effects of antibiotic concentrations close to the Maximum Residue Limits. The heat treatments at 120 °C for 40 min, 120 °C for 83 min, and 120 °C for 91 min caused total inactivation of cephalosporins, tetracyclines and quinolone residues in whey respectively.