Clinical Evaluation of Different Delivery Methods of At-Home Bleaching Gels Composed of 10% Hydrogen Peroxide.

OBJECTIVES:: This study aimed to compare the tooth sensitivity, gingival irritation, and bleaching efficacy of at-home whitening performed with 10% hydrogen peroxide (HP) using a conventional tray-delivered system or two different bleaching systems (strips or prefilled disposable trays). METHODS AND MATERIALS:: Sixty patients, with maxillary incisors darker than A2 were selected for this single-blind, parallel randomized clinical trial. Teeth were bleached during 14 days with a 30-minute gel contact with teeth per day. The 10% HP was delivered in a bleaching tray (White Class, FGM) in strips (White Strips, Oral-B) or prefilled disposable trays (Opalescence Go, Ultradent). The color changes were evaluated by subjective (Vita Classical and Vita Bleachedguide) and objective (Easyshade Spectrophotometer) methods at baseline and 30 days after the second bleaching session. Tooth sensitivity was recorded during 14 days with a five-point numeric rating scale (NRS) and 0-10 visual analog scale (VAS). The risk of gingival irritation was also recorded during 14 days on a dichotomous scale. All data were submitted to appropriate statistical analysis (α=0.05). RESULTS:: No significant difference was observed in the risks of tooth sensitivity among groups ( p>0.09). However, the conventional bleaching tray produced a higher intensity of tooth sensitivity when compared with the strips and prefilled disposable tray systems ( p<0.04). Regarding gingival irritation, the prefilled disposable tray system showed a lower risk of gingival irritation when compared with the conventional bleaching tray ( p=0.003). Significant whitening was observed in all groups after 30 days of clinical evaluation with no significant difference between them ( p>0.06). CONCLUSIONS:: All 10% HP bleaching systems showed similar whitening after a 14-day use. However, the strips and prefilled disposable trays produced lower intensity of tooth sensitivity than the conventional bleaching tray system. The prefilled disposable tray produced lower risk of gingival irritation when compared to the conventional bleaching tray.

In vitro evaluation of visible light-activated titanium dioxide photocatalysis for in-office dental bleaching.

The evaluation of the photocatalysis of visible light activated titanium dioxide employed in hydrogen peroxide (H2O2) was carried using seven H2O2 solutions (3.5 and 35%) and/or methylene blue (MB), with or without light irradiation (LI); the absorbance of MB was the bleaching indicator. Color analysis was performed on bovine teeth (n=12) using two different concentrations of H2O2, 6 and 35% associated with titanium dioxide (TiO2). Data were analyzed with one and two-way ANOVA, and significance level of p<0.05. Solutions containing MB, H2O2 at 3.5 or 35%, and TiO2, followed by LI, showed significant difference when compared with other groups. Greater MB reduction was found in 35% concentration. H2O2 35%+TiO2 gel showed no difference in comparison to control group. All groups for the color analysis assay showed ΔE higher than 3.3. In conclusion, TiO2 and H2O2 association is a promisor alternative for reducing the clinical time of in-office dental bleaching.

Tooth color changes and sensitivity in patients undergoing dental bleaching with 10% hydrogen peroxide using customized trays or strips: a randomized clinical trial.

BACKGROUND: This paper aimed to compare the tooth color changes and sensitivity in patients undergoing dental bleaching with 10% hydrogen peroxide using customized trays or strips as delivering systems. METHODS: A total of 50 patients aged between 18-30 years old were assigned into two groups (N.=25) according to the bleaching treatment: tray (TB) or strips (SB). For both techniques, the patients underwent a 30-minute application of 10% hydrogen peroxide twice a day for seven days. Tooth color was evaluated before, 3 and 7 days of treatment, and 14 days after bleaching using a tooth color shade guide (VITA® shade). Tooth sensitivity was assessed using the Visual Analogue Scale (VAS). The values obtained from the color changes and tooth sensitivity were statistically analyzed (α=5%). RESULTS: For both groups, there was a significant difference on the tooth color before and after bleaching (P<0.001), although there was no significant difference between them (P=0.4215). The SB group exhibited a lower frequency of sensitivity (50.2%) compared to the TB group (70.2%) (P<0.001). However, the highest number of individuals reporting score 1 of sensitivity was found in the SB group (37.3%) compared to the TB group (20.9%) (P<0.001). For the other scores, there were no differences between the SB and TB groups, with results of 9.8% and 8.4% for score 2 (P=0.744) and 2.7% and 0.5% for score 3 (P=0.122). CONCLUSIONS: The bleaching effect of 10% hydrogen peroxide is not influenced by the delivering system (tray or strips). Even though the technique with strips was associated to a lower frequency of dental sensitivity, the peak level of pain was greater when compared to the technique using trays.

Dentin bond strength and nanoleakage of the adhesive interface after intracoronal bleaching.

This study evaluated dentin bond strength (BS) and nanoleakage of non- and pre-etched dentin immediately (T0 ,), 7 days (T7 ), and 14 days (T14 ) after bleaching. Bovine incisors (150) were selected and half of them submitted to intrapulpal dentin etching (e). Non- and pre-etched dentin were subjected to the following (n = 15): no bleaching/control (C); 35% carbamide peroxide (CP); 35% hydrogen peroxide (35% HP); 25% hydrogen peroxide (25% HP); and sodium perborate (SP). Bleaching agents were applied to the pulp chamber four times within a 72-h interval. Afterwards, pulp chamber dentin was prepared for the BS test at different evaluation times (n = 5): T0 , T7 , and T14 . Composite blocks were built on pulp chamber and sectioned in slices. Slices were reduced to an hour-glass shape with a cross-sectional area of 0.8 mm2 and submitted to microtensile BS test. Two additional specimens for each group were prepared for nanoleakage evaluation by transmission electron microscopy (TEM). Results were analyzed by ANOVA (two-way) and Dunnett's test (p < .05). BS decreased immediately after intracoronal bleaching for both sound and pre-etched dentin (p < .05). At T14 , the BS of non-etched bleached dentin increased for all groups, whereas the pre-etched SPe group presented BS similar to the Ce. Nanoleakage within the hybrid layer was perceptible immediately after bleaching, although a decrease in nanoleakage was observed for all groups at T14 . Adhesive restorations should be performed 7-14 days after bleaching, according to the bleaching agent used. Intracoronal bleaching should be performed preferably with sodium perborate if previous dentin etching is applied.

Tooth colour and whiteness: A review.

OBJECTIVES: To review current knowledge concerning the application of colour science on tooth colour and whiteness description, measurement, distribution and its psychological impact. DATA SOURCES: "Scopus" databases were searched electronically with the principal keywords tooth, teeth, colour, white, whiteness. Language was restricted to English and original studies and reviews were included. Conference papers and abstracts were excluded. CONCLUSIONS: The appearance and colour of teeth are a common concern for patients across many populations and are associated with an increased desire for treatments that improve dental aesthetics, including tooth whitening. The application of colour science in dentistry has allowed the precise description of tooth colour and whiteness. Coupled with the advances in instrumental tooth colour measurement, such as spectrophotometers, colorimeters, spectroradiometers and digital imaging systems, these parameters are quantifiable in a reproducible and robust manner. These principles have been applied to the tooth colour distribution in many study populations, indicating, in general, differences in tooth colour for subject age and gender, but not for ethnicity. Psychophysical studies on tooth colour and whiteness via third party assessment of images indicate that whitened teeth lead to judgements that are more positive on personality traits such as social competence and appeal, intellectual ability and relationship satisfaction.

Efficacy of Home-use Bleaching Agents Delivered in Customized or Prefilled Disposable Trays: A Randomized Clinical Trial.

The purpose of this study was to evaluate bleaching methods containing hydrogen peroxide (HP) or carbamide peroxide (CP), dispensed in customized or prefilled trays, in terms of color change, tooth sensitivity, gingival irritation, acceptance, and comfort. Seventy-five volunteers were randomly selected and distributed according to the whitening agent (n=25): 10% HP dispensed in prefilled trays (Opalescence Go 10%) and 9.5% HP (Pola Day) and 10% CP both delivered in customized trays (Opalescence PF 10%). HP was applied for 30 min/d for 14 days (d), and CP for 8 h/d for 14 days. Evaluations were performed at baseline and at 7 days and 14 days of treatment. Color change was measured with Commission internationale de l'éclairage color coordinates (L*, a*, b*), Vita Classical, and 3D Master scales. A visual analog scale was used to assess tooth sensitivity, acceptance of the method and degree of comfort of the tray. Gingival irritation was evaluated as present or absent and localized or generalized. Regarding gingival irritation, tray acceptance, and tooth sensitivity, no differences were observed among the groups at any time (p>0.05). As for degree of comfort, 10% HP showed lower scores (comfortable) than 10% CP, with significant differences (p<0.05) from the other groups (comfortable to very comfortable). In terms of ΔL, Δa, and ΔE, no difference was observed among the groups or between the time periods (p>0.05). The Δb average was higher at 14 days (p<0.05), and there was no difference among the groups (p>0.05). Localized gingival irritation was observed in both tray methods. Mild tooth sensitivity was observed with time, regardless of the bleaching agent concentration or the application time. Color change was similar for all the groups at 7 days and 14 days, but there was a greater reduction in the yellow hue at 14 days. All the bleaching methods were highly accepted and effective in promoting whitening. Although prefilled trays are generally comfortable, they proved less comfortable than customized trays.

Resistência ao cisalhamento de bráquetes ortodônticos metálicos em dentes submetidos ao clareamento dentário / Orthodontic metal brackets resistance in whitened teeth subjected to shear strength

Introdução: pacientes adultos estão mais exigentes na busca pela estética oral, com isso, tem-se aumentando o uso de sistemas clareadores. Alguns estudos demonstram que há uma diminuição da resistência dos bráquetes após o clareamento. Objetivo: analisar a resistência as forças de cisalhamento de bráquetes em dentes submetidos ao tratamento clareador com peróxido de hidrogênio (H2O2). Metodologia: foram utilizados 30 dentes pré-molares, divididos aleatoriamente entre os três grupos: Grupo I: colagem direta dos bráquetes em dentes não clareados; Grupo II: colagem direta dos bráquetes em dentes clareados e submetidos ao teste de cisalhamento 15 dias após o clareamento, Grupo III: colagem direta dos bráquetes em dentes 24 horas dias após o clareamento. A colagem foi feita com o sistema Transbond XT. Os resultados obtidos nesse estudo foram registrados em Megapascal (MPa) e submetidos ao teste estatístico de Tukey segunda as normas da ANOVA. Resultados e Discussão: o grupo II não obteve diferença estatística significante em relação ao grupo I (controle), porém houve redução na resistência adesiva entre o grupo I e grupo III clareado com peróxido de hidrogênio à 35% na qual a colagem dos bráquetes foi realizada 24 horas após o clareamento dentário. Conclusão: recomenda-se um período de espera para a colagem dos bráquetes na superfície do esmalte submetido ao clareamento dentário.

Introduction: adult patients are demanding in regard of oral aesthetics. Therefore, there is increasing use of bleaching systems. Some studies show that there is a decrease in resistance of the brackets after dental bleaching. Objective: to analyze the strength of brackets shear strength in teeth submitted to bleaching treatment with hydrogen peroxide (H2O2). Method: a total of 30 premolars were randomly divided among the three groups. Group I: direct bonding of brackets on non-whitened teeth; Group II: direct bonding of brackets on whitened teeth and subjected to shear strength test 15 days after bleaching, Group III: direct bonding of brackets 24 hours days after bleaching. The bonding was performed with Transbond XT system. The results of this study were reported in Megapascal (MPa) and subjected to statistical Tukey test according to the ANOVA guidelines. Results and Discussion: group II did not presented difference statically significant compared to the group control (group I). However, there were reduction on the adhesion resistance between the group I and Group III, in which the brackets bonding was performed 24 hours after the dental bleaching with 35% hydrogen peroxide. There was a reduction in statistically significant bond strength between groups I and III. Conclusion: it is recommended a resting period to be done the placement of brackets on the surface of the enamel whitening submitted.

Peroxide dental bleaching via laser microchannels and tooth color measurements.

The aim of this study was to use microchannels drilled by an Er:YAG laser into a human tooth through the enamel into the dentin for direct injection of hydrogen peroxide (HP) to produce a minimally invasive, rapid, tooth bleaching effect. The experiments were conducted in vitro. Five microchannels with a diameter of ?200???m and a depth of ?2??mm were drilled through the palatal side of a human tooth crown using the microbeam of an Er:YAG-laser with a wavelength of 2.94???m. After injection of an aqueous solution of 31%-HP through the microchannels, the tooth color was evaluated using a VITA shade guide and International Commission on Illumination L*ab color parameters. A tooth model used for the evaluation of the distribution of HP concentration was created and the amount of HP which can be injected into tooth dentin to bleach it safely was estimated. Injection of 1.5±0.1??mm3 of 31%-HP into the tooth led to noticeable bleaching within 3 h and significant improvement of tooth color within 24 h.

Evaluation of temperature increase during in-office bleaching.

The use of light sources in the bleaching process reduces the time required and promotes satisfactory results. However, these light sources can cause an increase in the pulp temperature. Objective The purpose of the present study was to measure the increase in intrapulpal temperature induced by different light-activated bleaching procedures with and without the use of a bleaching gel. Material and Methods A human maxillary central incisor was sectioned 2 mm below the cementoenamel junction. A K-type thermocouple probe was introduced into the pulp chamber. A 35% hydrogen peroxide bleaching gel was applied to the vestibular tooth surface. The light units used were a conventional halogen, a hybrid light (only LED and LED/Laser), a high intensity LED, and a green LED light. Temperature increase values were compared by two-way ANOVA and Tukey´s tests (p<0.05). Results There were statistically significant differences in temperature increases between the different light sources used and between the same light sources with and without the use of a bleaching gel. The presence of a bleaching gel generated an increase in intra-pulpal temperature in groups activated with halogen light, hybrid light, and high intensity LED. Compared to the other light sources, the conventional halogen lamp applied over the bleaching gel induced a significant increase in temperature (3.83±0.41°C). The green LED unit with and without gel application did not produce any significant intrapulpal temperature variations. Conclusion In the present study, the conventional halogen lamp caused the highest increase in intrapulpal temperature, and the green LED caused the least. There was an increase in temperature with all lights tested and the maximum temperature remained below the critical level (5.5°C). The addition of a bleaching gel led to a higher increase in intrapulpal temperatures.

Efecto del blanqueamiento y el remineralizante sobre la microdureza y micromorfología del esmalte dental / Effect of whitening and remineralizing agent on the microhardness and micromorphology of dental enamel

Diversos estudios han demostrado mayor o menor grado de afectacióndel esmalte después del uso de los distintos tratamientos para blanqueamiento dental. Por este motivo, se han propuesto varios métodos ytratamientos remineralizantes que pudieran revertir los efectos negativosde dicho tratamiento. El objetivo del presente trabajo fue evaluar el efecto del Opalescence PF 15 por ciento (peróxido de carbamida al 15%) y delremineralizante Flor-Opal (NaF al 1.1 por ciento), ambos de la casa comercialUltradent, así como de la saliva artifi cial sobre la microdureza y la micromorfología del esmalte humano. Se utilizaron 10 incisivos centrales superiores recién extraídos provenientes de centros de salud del Puerto de Veracruz, México. Réplicas de estos dientes fueron obtenidas en lasdiferentes fases del tratamiento de blanqueamiento para ser posteriormente observadas en el microscopio electrónico de barrido (MEB). Asimismo, se realizaron mediciones de microdureza en la superficie del esmalte de los dientes seleccionados durante las diferentes fases del tratamiento de blanqueamiento. Se observó que la microdureza del esmalte se ve disminuida (aunque no significativamente) después de la aplicación del peróxido de carbamida al 15 por ciento, y vuelve a subir después de la aplicación de los remineralizantes, para posteriormente volver a descender siete días después del uso de los mismos. Los datos de microdureza coincidieron con los de micromorfología obtenidos enel MEB. Se concluye que el peróxido de carbamida al 15 opr ciento sí afecta lamicromorfología de la superficie del esmalte, además de que disminuyela microdureza del mismo. Con el uso del remineralizante Flor-Opal se onsiguieron mayores valores de microdureza y mejores características micromorfológicas comparado con la saliva artificial.

Studies have shown varying degrees of involvement of the enamel following the use of tooth-whitening treatments. Consequently, a range of methods and remineralizing treatments have been proposed to reverse their negative effects. The aim of this study was, therefore, to evaluate the effect of Opalescence PF 15% (carbamide peroxide 15%) and the remineralizing treatment Flor-Opal (1.1% NaF), both produced by Ultradent, as well as artifi cial saliva on the microhard-ness and micromorphology of human enamel. Ten recently-extracted central incisors from health centers in the port of Veracruz, Mexico, were used. Replicas of these teeth were made at the various stages of the whitening treatment in order to observe these under a scanning electron microscope (SEM). Microhardness measurements were also taken on the surface of the enamel of the teeth selected at each of the various stages of the whitening treatment. The microhardness of the enamel was found to decrease (though not signifi cantly) after the ap-plication of carbamide peroxide 15%, then increase again following the application of the remineralizing agents, only to decrease again seven days after these were applied. The microhardness data coincided with that for micromorphology obtained from the SEM. We conclude that carbamide peroxide 15% does affect the micromorphology of the enamel surface and also decreases its microhardness. Flor-Opal produced higher microhardness values and better micromorphological characteristics compared to artifi cial saliva.

Evaluation of temperature increase during in-office bleaching

ABSTRACT The use of light sources in the bleaching process reduces the time required and promotes satisfactory results. However, these light sources can cause an increase in the pulp temperature. Objective The purpose of the present study was to measure the increase in intrapulpal temperature induced by different light-activated bleaching procedures with and without the use of a bleaching gel. Material and Methods A human maxillary central incisor was sectioned 2 mm below the cementoenamel junction. A K-type thermocouple probe was introduced into the pulp chamber. A 35% hydrogen peroxide bleaching gel was applied to the vestibular tooth surface. The light units used were a conventional halogen, a hybrid light (only LED and LED/Laser), a high intensity LED, and a green LED light. Temperature increase values were compared by two-way ANOVA and Tukey´s tests (p<0.05). Results There were statistically significant differences in temperature increases between the different light sources used and between the same light sources with and without the use of a bleaching gel. The presence of a bleaching gel generated an increase in intra-pulpal temperature in groups activated with halogen light, hybrid light, and high intensity LED. Compared to the other light sources, the conventional halogen lamp applied over the bleaching gel induced a significant increase in temperature (3.83±0.41°C). The green LED unit with and without gel application did not produce any significant intrapulpal temperature variations. Conclusion In the present study, the conventional halogen lamp caused the highest increase in intrapulpal temperature, and the green LED caused the least. There was an increase in temperature with all lights tested and the maximum temperature remained below the critical level (5.5°C). The addition of a bleaching gel led to a higher increase in intrapulpal temperatures.

In Vitro Evaluation of the Efficacy of Different Over-the-Counter Products on Tooth Whitening.

This in vitro study evaluated the whitening effect of four different over-the-counter products compared with a 10% carbamide peroxide (CP) bleaching gel. Specimens obtained from bovine incisors were stained in a tea solution and randomly divided into six groups according to the product used (n=10): CT: conventional toothpaste (negative control); CWT: Crest 3D White toothpaste; CWR: Crest 3D White mouth rinse; CWS: Crest 3D White strips; DW: Dazzling White (paint-on gel); and OP: Opalescence PF 10% CP (at-home bleaching gel, positive control). Over-the-counter products and 10% CP were used according to the manufacturer's recommendations. Color measurements were performed according to the CIELab system using spectrophotometer after staining, and after 4 and 8 weeks of the treatment procedure. The ∆E, ∆L, ∆a, and ∆b values were calculated. The data obtained were analyzed by repeated-measures ANOVA. Tukey's test for multiple comparisons was applied (p<0.05). All groups, except CWT, were effective in tooth whitening in comparison with conventional toothpaste. There was no significant difference in tooth whitening between CWT and CT (p=0.93). CWS, DW and OP groups presented significantly higher color changes than the CWR group. DW and CWS showed similar tooth whitening to OP.

In Vitro Evaluation of the Efficacy of Different Over-the-Counter Products on Tooth Whitening

This in vitro study evaluated the whitening effect of four different over-the-counter products compared with a 10% carbamide peroxide (CP) bleaching gel. Specimens obtained from bovine incisors were stained in a tea solution and randomly divided into six groups according to the product used (n=10): CT: conventional toothpaste (negative control); CWT: Crest 3D White toothpaste; CWR: Crest 3D White mouth rinse; CWS: Crest 3D White strips; DW: Dazzling White (paint-on gel); and OP: Opalescence PF 10% CP (at-home bleaching gel, positive control). Over-the-counter products and 10% CP were used according to the manufacturer's recommendations. Color measurements were performed according to the CIELab system using spectrophotometer after staining, and after 4 and 8 weeks of the treatment procedure. The ∆E, ∆L, ∆a, and ∆b values were calculated. The data obtained were analyzed by repeated-measures ANOVA. Tukey's test for multiple comparisons was applied (p<0.05). All groups, except CWT, were effective in tooth whitening in comparison with conventional toothpaste. There was no significant difference in tooth whitening between CWT and CT (p=0.93). CWS, DW and OP groups presented significantly higher color changes than the CWR group. DW and CWS showed similar tooth whitening to OP.

Este estudo avaliou o efeito branqueador de quarto produtos disponíveis comercialmente em comparação com um gel branqueador contendo 10% de peróxido de carbamida (PC). Amostras obtidas de incisivos bovinos foram tingidas numa solução de chá e distribuídas aleatoriamente em seis grupos, de acordo com o produto utilizado (n=10): CT: dentifrício convencional (controle negativo); CWT: dentifrício Crest 3D White; CWR: solução para enxague Crest 3D White; CWS: tiras branqueadoras Crest 3D; DW: gel branqueador Dazzling White e OP: Opalescence PF com 10% de PC (gel branqueador para uso doméstico, controle positivo). Os produtos comerciais e PC a 10% foram usados de acordo com as instruções dos fabricantes. Foram feitas medidas de cor com o sistema CIELab com espectrofotômetro, imediatamente após o tingimento, e após 4 e 8 semanas do tratamento. Foram calculados os valores de ∆E, ∆L, ∆a e ∆b. Os dados obtidos foram analisados por ANOVA para medidas repetidas. Foi aplicado o teste de Tukey para comparações múltiplas (p<0,05). Com exceção do Grupo CWS, todos os grupos foram efetivos para o branqueamento dental na comparação com o dentifrício convencional. Não houve diferença significativa no branqueamento dental entre CWT e CT (p=0,93). Os grupos CWS, DW e OP apresentaram mudanças de cor significativamente maiores que o grupo CWR. Os grupos DW e CWS produziram branqueamento similar a OP.

Employment of Reservoirs in At-Home Whitening Trays: Efficacy and Efficiency in Tooth Whitening.

AIM: This study aimed to determine the efficacy of trays made with and without reservoirs, in conjunction with time and cost evaluations, by measuring color change with home whitening procedures. MATERIALS AND METHODS: Extracted human maxillary teeth (central incisors n = 20; canines n = 20; molars n = 20) and 60 artificial teeth (lateral n = 20; premolar n = 40) were mounted into ten typodonts. Tray fabrication was completed such that a block-out resin reservoir was placed on half of the buccal surface of the tray, while the other half remained without a reservoir. Whitening with custom fabricated trays was performed based on two different whitening regimens, where each regimen was assigned to five typodonts: Night-time: Opalescence PF 10% carbamide peroxide for 8 hours daily and Day-time: Philips DayWhite 9.5% hydrogen peroxide for 30 minutes, twice daily. Both systems were applied for 1 week. To evaluate tooth shade, the VITA Easyshade® Advance 4.0 spectrophotometer was used. Color measurements were obtained at baseline (T1), 1-day post-whitening (T2), and 1 month post-whitening (T3). One-way ANOVA, followed by post-hoc Tukey's HSD test, was used to detect significant difference in the overall color change (ΔE*) among the four groups at T2 and T3. Additionally, paired-sample t-test was used to assess difference in ΔE* between T2 and T3 treatment within each of four techniques of tray fabrication. RESULTS: No significant difference in ΔE* was found among the four groups at T2 and T3 (p > 0.05 in each instance). There were significant differences in mean ΔE* between T2 and T3 treatment for the day white treatment groups without reservoir (6.96 vs 10.19 respectively; p = 0.0026) and with reservoirs (6.23 vs 9.79 respectively; p = 0.0031). CONCLUSION: The use of reservoirs does not have a significant effect on whitening efficacy, regardless of type of whitening material and regimen. CLINICAL SIGNIFICANCE: The use of custom fabricated trays with or without reservoirs were equally effective in whitening teeth.

Can Whitening Strips interfere with the Bond Strength of Composite Resins?

AIM: The aim of this study was to investigate in vitro the bond strength of composite resins on enamel previously treated with whitening strips. MATERIALS AND METHODS: A total of 48 bovine incisors were allocated to four experimental groups (n = 12 each): G1 (WSC)- treated with 9.5% hydrogen peroxide whitening strips (3D White Whitestrips® Advanced Vivid/CREST); G2 (WSO)-treated with 10% hydrogen peroxide whitening strips (3D WhiteTM/Oral B); G3 (WG)-treated with 7.5% hydrogen peroxide gel with fluorine, calcium and potassium nitrate (White Class®/FGM); and G4 (C)-control not subjected to bleaching treatment. The specimens were subjected to bleaching over 2 weeks following the manufacturers' instructions. Following the elaboration of the composite resin test specimens, the samples were stored in artificial saliva and subsequently subjected to the micro-shear test using the universal testing machine (EMIC®). The bond strength values were analyzed by one-way ANOVA and Tukey's statistical test (5%). RESULTS: Significant differences were observed among the investigated groups (p < 0.05). The G3-WG exhibited greater values compared with the control group and the groups treated with strips, G1-WSC and G2-WSO. Analysis of the bond interface revealed that a large fraction of the failures occurred at the enamel-resin interface. CONCLUSION: The bond strength decreased following 14 days of treatment with bleaching strips, whereas the whitening gel with 7.5% hydrogen peroxide, calcium and fluorine increased the bond strength.

Temperature rise during experimental light-activated bleaching.

The purpose of this study was to evaluate the surface and intrapulpal temperatures after treatments with different bleaching gels subjected to different types of light activation. A K-type thermocouple and infrared thermometer were used to measure the temperature increase during the 15- or 30-min treatment period. Light-emitting diode with a center wavelength of 405 nm (LED405), organic light-emitting diode (OLED), and femtosecond laser were tested and compared to ZOOM2. The tooth surface was treated with five bleaching agents and Vaseline which served as a control.The generalized estimating equation (GEE) model was applied for testing the differences in temperature increase. The ZOOM2 light source led to the largest increase in mean pulpal and tooth surface temperatures of 21.1 and 22.8 °C, followed by focused femtosecond laser which increased the pulpal and surface temperatures by up to 15.7 and 16.8 °C. Treatments with unfocused femtosecond laser, LED405, and OLED induced significantly lower mean temperature increases (p < 0.001 for each comparison with ZOOM2 and focused femtosecond laser), both in the pulp chamber (up to 2.7, 2.5, and 1.4 °C) and at the tooth surface (up to 3.2, 3.4, and 1.8 °C). Significant differences between pulp chamber and tooth surface measurements were obtained for all types of bleaching gel, during treatments with ZOOM2 (p < 0.001), LED405 (p < 0.001), and unfocused (p < 0.001) and focused femtosecond laser (p ≤ 0.002). Different bleaching agents or Vaseline can serve as an isolating layer. Focused femtosecond laser and ZOOM2 produced large temperature increases in the pulp chamber and at the tooth surface. Caution is advised when using these types of light activation, while LED405, OLED, and unfocused femtosecond laser could be safely used.

Temperature rise in pulp and gel during laser-activated bleaching: in vitro.

The aim of this study was to evaluate the increase in temperature induced by various light sources during in-office bleaching treatment, under simulated blood microcirculation in pulp conditions. Ten freshly extracted human maxillary central incisors were used for the study. The roots of the teeth were removed from approximately 2 mm below the cementoenamel junction and fixed on an apparatus for the simulation of blood microcirculation in pulp. A J-type thermocouple wire was inserted into the pulp chamber through an artificial access at the lingual surfaces of the teeth, and another thermocouple wire was fixed on the labial surface of the teeth meanwhile. An in-office bleaching agent, intense red in color and with 30% water content, was applied to the labial surfaces of the teeth, and repeating measurements were made for each tooth using three different light sources: Er:YAG laser (40 mJ, 10 Hz, 20 s), 810-nm diode laser (4 W, 20 s, CW), and high-intensity light-emitting diodes (LED) (1,100 mW/cm(2), 20 s) as the control. Temperature increase in the pulp chamber and within the bleaching gel during light application were recorded and statistically evaluated. The highest pulp temperature increases were recorded for the diode laser group (2.61 °C), followed by the Er:YAG laser (1.86 °C) and LED (1.02 °C) groups (p < 0.05; analysis of variance (ANOVA), Tukey's honestly significant difference (HSD)). Contradictorily, the lowest gel temperature increases were recorded for diode laser (6.21 °C) and followed by LED (12.38 °C) and Er:YAG (20.11 °C) groups (p < 0.05; ANOVA, Tukey's HSD). Despite the significant differences among the groups, the temperature increases recorded for all groups were below the critical value of 5.6 °C that can cause irreversible harmful changes in pulp tissue. It can be concluded that, with regard to temperature increase, all the light sources evaluated in this study can be used safely for in-office bleaching treatment within the described parameters.

Integrating techniques to re-establish dentogingival esthetics.

The aim of this article was to report the clinical case of a male patient of 20 years with hyperpigmented gingiva and moderate fluorosis, whose smile was reestablished by the use of a laser assisted depigmentation procedure, an enamel microabrasion technique, followed by at-home bleaching and subsequent remineralization therapy. The association of these techniques presented excellent results and the patient was satisfied. All techniques are painless, fast and easy to perform, in addition to preserving the hard and soft dental structure. Treatment showed immediate and permanent results; these techniques must be divulged among professionals and their patients.