Inorganic Characterization of Feeds Based on Processed Animal Protein Feeds.

The potential of utilizing inorganic constituents in processed animal proteins (PAPs) for species identification in animal feeds was investigated, with the aim of using these constituents to ensure the quality and authenticity of the products. This study aimed to quantify the inorganic content across various PAP species and assess whether inorganic analysis could effectively differentiate between PAP species, ultimately aiding in the identification of PAP fractions in animal feeds. Four types of PAPs, namely bovine, swine, poultry, and fish-based, were analyzed and compared to others made up of feathers of vegetal-based feed. Also, three insect-based PAPs (Cricket, Silkworm, Flour Moth) were considered in this study to evaluate the differences in terms of the nutrients present in this type of feed. Ionic chromatography (IC) was used to reveal the concentrations of NO3-, NO2, Cl-, and SO42-, and inductively coupled plasma optical emission spectroscopy (ICP-OES) to detect Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, P, Si, Sr, Ti, and Zn. The application of multivariate chemometric techniques to the experimental results allowed us to determine the identification capability of the inorganic composition to identify correlations among the variables and to reveal similarities and differences among the different species. The results show the possibility of using this component for discriminating between different PAPS; in particular, fish PAPs are high in Cd, Sr, Na, and Mg content; swine PAPs have lower metal content due to high fat; feathers and vegetal feed have similar Al, Si, and Ni, but feathers are higher in Fe and Zn; and insect PATs have nutrient levels comparable to PAPs of other origins but are very high in Zn, Cu, and K.

Distribution of inorganic compositions of Japanese tap water: a nationwide survey in 2019-2024.

A nationwide survey of inorganic components of tap water all over Japan was conducted from 2019 to 2024. In this survey, 1564 tap water samples were collected, and an additional 194 tap water samples were collected from 33 other countries. The water samples were analyzed for 27 dissolved inorganic components, with a primary focus on the distribution of major and trace components, including Ca, Mg, K, Na, Cl-, NO3-, SO42-, total-hardness, Al, Fe, Cu, Mn, and Zn. The Japanese tap water hardness was 50.5 ± 30.2 (± 1σ SD) mg/L, classified as soft water according to the World Health Organization (WHO) classification. The average content of each major component in Japanese tap water tended to be lower than those in other countries. Furthermore, Piper trilinear diagrams were used to categorize Japanese tap water types. The dominating water types were the Ca-HCO3 and mixed types, which had a nationwide distribution. Japanese tap water generally complied with Japanese and WHO drinking water criteria, with only 1% (17/1564 sites) of the samples exceeding water quality standards. Observations of water quality changes for 2 years at three household faucets revealed that fluctuations in major components and trace metals (Al, Fe, Cu, Mn, and Zn) varied in different patterns. This suggests that the behavior of trace metal elements is influenced by local infrastructure, such as supply pipes, distinct from the variability in source water quality.

Evaluation of ED-XRF for the detection of inorganic adulterants in turmeric, paprika and oregano.

Herbs and spices are known to be prone to food fraud and accurate analytical tools are needed to detect adulterants. Amongst the potential adulteration, dilution with bulking agents has regularly been reported, especially with inorganic materials such as talc or brick powder. Energy Dispersive X-Ray Fluorescence (ED-XRF) spectrometry is a well-established non-destructive analytical technique for qualitative and quantitative elemental analysis of a wide variety of samples. ED-XRF was here evaluated for the detection of inorganic adulterants in turmeric, paprika and oregano, which were selected as representative for the herbs & spices food category. Magnesium, silicon, and calcium were identified as elements to detect talc, soapstone, brick/clay powder, and chalk inorganic adulterants. ED-XRF successfully detected adulterated samples when spiked down to 5% (w/w) in the selected herbs and spices. With its ease-of-use and speed, ED-XRF is well adapted for the monitoring of inorganic adulteration of herbs and spices along the supply chain.

A comprehensive survey and analysis of international drinking water regulations for inorganic chemicals with comparisons to the World Health Organization's drinking-water guidelines.

BACKGROUND: The World Health Organization (WHO) has published criteria for determining the quality of drinking water since 1958. Since 1984, these criteria were termed "guidelines" to emphasize that they are not national standards, but rather guidelines for nations to develop their own national standards, which may take into account local environmental, social, economic, and cultural conditions. When calculating guideline values (GVs), the WHO reviews the toxicological literature, calculates a health-based value (HBV), and determines whether the HBV should be adopted as a GV. The WHO also considers aesthetic aspects of drinking water quality, such as taste and the staining of plumbing fixtures, and additionally supplies aesthetic values (AVs) for certain drinking water contaminants. There is no central registry for national drinking water standards, so the degree of variation of national drinking water standards is not known. METHODS: We examined standards, guidelines, and background documents for all inorganic contaminants published by the WHO from 1958-2022. We also searched for national drinking water standards for all independent countries. RESULTS: We found the WHO currently has 16 GVs, six HBVs without GVs, and six AVs without HBVs or GVs for inorganic drinking water contaminants, excluding disinfection agents and their byproducts. More than half of the point of departure studies used to support these values were published in 2005 or earlier. Ninety-eight percent of the world's population lives in jurisdictions with drinking water standards, and 14 countries directly link their national standards to the current WHO's drinking water guidelines. Lack of transparency (standards available only through purchase) and typographical errors are common problems, especially for resource-limited countries. CONCLUSIONS: The WHO drinking water guidelines are crucially important for drinking water safety; they are used for guidance or as official standards throughout the world. It is crucial that they be based on the best available science.

Separating Daily 1 km PM2.5 Inorganic Chemical Composition in China since 2000 via Deep Learning Integrating Ground, Satellite, and Model Data.

Fine particulate matter (PM2.5) chemical composition has strong and diverse impacts on the planetary environment, climate, and health. These effects are still not well understood due to limited surface observations and uncertainties in chemical model simulations. We developed a four-dimensional spatiotemporal deep forest (4D-STDF) model to estimate daily PM2.5 chemical composition at a spatial resolution of 1 km in China since 2000 by integrating measurements of PM2.5 species from a high-density observation network, satellite PM2.5 retrievals, atmospheric reanalyses, and model simulations. Cross-validation results illustrate the reliability of sulfate (SO42-), nitrate (NO3-), ammonium (NH4+), and chloride (Cl-) estimates, with high coefficients of determination (CV-R2) with ground-based observations of 0.74, 0.75, 0.71, and 0.66, and average root-mean-square errors (RMSE) of 6.0, 6.6, 4.3, and 2.3 µg/m3, respectively. The three components of secondary inorganic aerosols (SIAs) account for 21% (SO42-), 20% (NO3-), and 14% (NH4+) of the total PM2.5 mass in eastern China; we observed significant reductions in the mass of inorganic components by 40-43% between 2013 and 2020, slowing down since 2018. Comparatively, the ratio of SIA to PM2.5 increased by 7% across eastern China except in Beijing and nearby areas, accelerating in recent years. SO42- has been the dominant SIA component in eastern China, although it was surpassed by NO3- in some areas, e.g., Beijing-Tianjin-Hebei region since 2016. SIA, accounting for nearly half (∼46%) of the PM2.5 mass, drove the explosive formation of winter haze episodes in the North China Plain. A sharp decline in SIA concentrations and an increase in SIA-to-PM2.5 ratios during the COVID-19 lockdown were also revealed, reflecting the enhanced atmospheric oxidation capacity and formation of secondary particles.

Flexible Artificial Optoelectronic Synapse based on Lead-Free Metal Halide Nanocrystals for Neuromorphic Computing and Color Recognition.

Optoelectronic synapses combining optical-sensing and synaptic functions are playing an increasingly vital role in the neuromorphic computing systems development, which can efficiently process visual information and complex recognition, memory, and learning. Metal halides are considered promising candidates for synaptic devices due to their excellent optoelectronic properties. However, the toxicity of lead and the further development of device functions are the recognized problems at present. Herein, a flexible optoelectronic synapses system based on high-quality lead-free Cs3 Bi2 I9 nanocrystals is demonstrated, in which the carrier confinement caused by the band mismatching between the Cs3 Bi2 I9 and the organic semiconductor layer provides the possibility to simulate synaptic behaviors. The synaptic functions including long/short-term memory and learning-forgetting-relearning are demonstrated in this device and visual perception, visual memory, and color recognition functions are successfully implemented. Additionally, the flexible device exhibits excellent robustness and can realize imaging of light distribution under curved hemispheres similar to the human eye. Finally, through the simulation based on an artificial neural network algorithm, the device successfully realizes the high-precision recognition of handwritten digital images and possesses a strong fault tolerant capability even in bending states. These results are expected to drive the practical progress of metal halide for neuromorphic computing.

Investigation of inorganic elemental content of honey from regions of North Island, New Zealand.

Determination of geographical origin of honey is important to consumers to confirm authenticity. This study investigated the elemental fingerprint of 181 honey samples collected from apiary sites in six regions of North Island, New Zealand to determine if differences were observed due to region of collection or land use surrounding the hive (e.g. agricultural, rural, urban). Using principal component analysis, soil related elements (Ca, K, Mg, Mn, Na) provided 75.2% discrimination of samples in the first two principal components. Overall, low concentrations of heavy metals were observed; lead was present in close proximity to highly trafficked roads (28.1% of samples; 9.50-76.5 µg kg-1) and cadmium was primarily present in honey collected from agricultural land in the Waikato (<51.6 µg kg-1). The use of an elemental fingerprint of New Zealand honey may be advantageous to determine the geographical origin compared to honey produced from other countries.

Inorganic Elements in Mytilus galloprovincialis Shells: Geographic Traceability by Multivariate Analysis of ICP-MS Data.

The international seafood trade is based on food safety, quality, sustainability, and traceability. Mussels are bio-accumulative sessile organisms that need regular control to guarantee their safe consumption. However, no well-established and validated methods exist to trace mussel origin, even if several attempts have been made over the years. Recently, an inorganic multi-elemental fingerprint coupled to multivariate statistics has increasingly been applied in food quality control. The mussel shell can be an excellent reservoir of foreign inorganic chemical species, allowing recording long-term environmental changes. The present work investigates the multi-elemental composition of mussel shells, including Al, Cu, Cr, Zn, Mn, Cd, Co, U, Ba, Ni, Pb, Mg, Sr, and Ca, determined by inductively-coupled plasma mass-spectrometry in Mytilus galloprovincialis collected along the Central Adriatic Coast (Marche Region, Italy) at 25 different sampling sites (18 farms and 7 natural banks) located in seven areas. The experimental data, coupled with chemometric approaches (principal components analysis and linear discriminant analysis), were used to create a statistical model able to discriminate samples as a function of their production site. The LDA model is suitable for achieving a correct assignment of >90% of individuals sampled to their respective harvesting locations and for being applied to counteract fraud.

Imaging inorganic nanomaterial fate down to the organelle level.

Nanotoxicology remains an important and emerging field since only recent years have seen the improvement of biological models and exposure setups toward real-life scenarios. The appropriate analysis of nanomaterial fate in these conditions also required methodological developments in imaging to become sensitive enough and element specific. In the last 2-4 years, impressive breakthroughs have been achieved using electron microscopy, nanoscale secondary ion mass spectrometry, X-ray fluorescence microscopy, or fluorescent sensors. In this review, basics of the approaches and application examples in the study of nanomaterial fate in biological systems will be described to highlight recent successes in the field.

Inorganic oxidizer detection from propellants, pyrotechnics, and homemade explosive powders using gradient elution moving boundary electrophoresis.

Advancement in rapid targeted chemical analysis of homemade and improvised explosive devices is critical for the identification of explosives-based hazards and threats. Gradient elution moving boundary electrophoresis (GEMBE), a robust electrokinetic separation technique, was employed for the separation and detection of common inorganic oxidizers from frequently encountered fuel-oxidizer mixtures. The GEMBE system incorporated sample and run buffer reservoirs, a short capillary (5 cm), an applied electric field, and a pressure-driven counterflow. GEMBE provided a separation format that allowed for continuous injection of sample, selectivity of analytes, and no sample cleanup or filtration prior to analysis. Nitrate, chlorate, and perchlorate oxidizers were successfully detected from low explosive propellants (e.g., black powders and black powder substitutes), pyrotechnics (e.g., flash powder), and tertiary explosive mixtures (e.g., ammonium nitrate- and potassium chlorate-based fuel-oxidizer mixtures). Separation of these mixtures exhibited detection without interference from a plethora of additional organic and inorganic fuels, enabled single particle analysis, and demonstrated semiquantitative capabilities. The bulk counterflow successfully excluded difficult components from fouling the capillary, yielding estimated limits of detection down to approximately 10 µmol/L. Finally, nitrate was separated and detected from postblast debris collected and directly analyzed from two nitrate-based charges.

Application of micro-dried droplets for quantitative analysis of particulate inorganic samples with LA-ICP-MS demonstrated on surface-modified nanoparticle TiO2 catalyst materials.

A quick, flexible and reliable method was developed, based on laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), for accurate assessment of nanomaterial composition with sample amounts in the picogram to nanogram range. We demonstrate its capabilities for the analysis of surface-modified TiO2 nanoparticulate (NP) catalyst materials. For sampling, suspensions of NP were deposited on a substrate material, ablated with a pulsed laser and then analysed using quadrupole ICP-MS. The calibration and quantification approach is based on the use of so-called micro-dried droplets (µDD) as the standard material. To overcome some of the major drawbacks of conventional dried droplet approaches, self-aliquoting wells were used in this work. By mimicking the ablation conditions for the sample and standard, it was possible to create a pseudo-matrix-matched calibration, not only for this specific NP composition but also for a larger variety of samples. A commercially available reference material (AUROlite™, Strem Chemicals) was used to compare the method against established methods such as slurry analysis and microwave-assisted digestion in combination with subsequent liquid sample measurement. The results obtained with the proposed procedure (0.74%wt ± 0.13%wt) are in good agreement to a certified value (0.8%wt) and added an additional layer of information. Due to the significantly reduced sampling size in comparison with the investigated liquid measurement approaches, it was possible to obtain information about the homogeneity of the catalyst material. The results indicate that the AUROlite™ reference material has a heterogeneous loading which requires more than 300 pg of material to be used to cancel out. This was not observed for the custom materials discussed in this work. Graphical abstract.

Förster resonance energy transfer (FRET)-based small-molecule sensors and imaging agents.

In this tutorial review, we will explore recent advances in the construction and application of Förster resonance energy transfer (FRET)-based small-molecule fluorescent probes. The advantages of FRET-based fluorescent probes include: a large Stokes shift, ratiometric sensing and dual/multi-analyte responsive systems. We discuss the underlying energy donor-acceptor dye combinations and emphasise their applications for the detection or imaging of cations, anions, small neutral molecules, biomacromolecules, cellular microenvionments and dual/multi-analyte responsive systems.

Seasonal characteristic composition of inorganic elements and polycyclic aromatic hydrocarbons in atmospheric fine particulate matter and bronchoalveolar lavage fluid of COPD patients in Northeast China.

OBJECTIVE: To explore the composition characteristics of atmospheric fine particulate matter (PM2.5) and bronchoalveolar lavage fluid (BALF), and their impact on the development of chronic obstructive pulmonary disease (COPD). METHODS: The atmospheric PM2.5 samples and BALF samples from COPD patients were collected from June 2, 2017 to October 30, 2018, and allocated into a high-risk of PM2.5 inhalation group and a low-risk PM2.5 inhalation group according to the heating season in Harbin. Inorganic elements were detected by ICP-MS, and polycyclic aromatic hydrocarbons (PAHs) were detected by GC/MS. RESULTS: Twenty-six inorganic elements were found in 54 BALF specimens. There was a high correspondence in inorganic elements between BALF and atmospheric PM2.5. Trace elements Cr, Mn, V, and Co, and toxic trace elements Al, Pb, Cd, As, and Ag were above the upper limit of normal blood. There were significant higher K, Ti, Fe, Co, Cu, Se, Rb, Ag, and Sb in BALF of the high-risk PM2.5 inhalation group (p < 0.05). Sixteen PAHs were detected in 32 BALF samples. The main components of BALF and atmospheric PM2.5 were the high molecular weight PAHs, and the species and concentration of PAHs in BALF and atmospheric PM2.5 are highly consistent. CONCLUSION: The types and concentrations of inorganic elements and PAHs in BALF of COPD patients are highly consistent with those of atmospheric PM2.5. The sustained high concentrations of Benzo(a)anthracene, Chrysene, Benzo(b)Fluoranthene, Benzo(k)Fluoranthene, Indeno(123-c,d)Pyrene, and Benzo(a)Pyrene in BALF of COPD patients may have long-term adverse effects on COPD patients.

Simultaneous determination of nine atmospheric amines and six inorganic ions by non-suppressed ion chromatography using acetonitrile and 18-crown-6 as eluent additive.

Atmospheric amines contribute to the nucleation and initial growth of new particles as well as secondary organic aerosol formation, influencing the radiative balance of the Earth's atmosphere. In this study, we develop an ion chromatography (IC) method for separating and quantifying the nine most abundant amines (methylaminium (MMAH+), dimethylaminium (DMAH+), trimethylaminium (TMAH+), ethylaminium (MEAH+), diethylaminium (DEAH+), propylaminium (MPAH+), butylaminium (MBAH+), ethanolaminium (MEOH+), and triethanolaminium (TEOH+)) from six common inorganic species in atmospheric aerosols. The retention times of the amines were altered by the addition of acetonitrile to the eluent because acetonitrile can reduce the adsorption of hydrophobic amines on the stationary phase. The developed method achieved the successful separation of DEAH+ and TMAH+ from inorganic cations, which often coelute with each other in established IC methods. The interference of K+ on the determination of MEAH+ was eliminated by the complexation of K+ with 18-crown-6, which prolonged the retention time of K+. Finally, 9 target amines and 6 common inorganic cations were separated, with a resolution Rs ≥ 1.2 for DEAH+ and MPAH+ and Rs > 1.5 for other species. The detection limits varied in the range of 0.34-1.48 ng for the 9 amines and 0.19-0.56 ng for the inorganic cations. The developed method was successfully applied for the determination of low molecular weight amines and inorganic cations in PM2.5 collected from an urban site in Shanghai and an isolated coast of Chongming Island. Eight amines were detected in the urban samples, in which MMAH+ and DMAH+ dominated. The average amine concentration in the urban aerosols was 76.3 ± 38.4 ng m-3, which is approximately 4-fold higher than those in the marine samples collected from the coast.

Physicochemical characteristics of oil-based cuttings from pretreatment in shale gas well sites.

Understanding the physicochemical characteristics of oil-based cuttings (OBCs) is an important foundation for subsequent treatment and management. The macro- and microscopic properties of white oil-based cuttings (WOBCs) and diesel-based cuttings (DBCs) after the different pretreatment steps have been assessed using scanning electron microscopy. The organic and inorganic compositions of OBCs have been analyzed using X-ray diffraction, Fourier-transform infrared spectrometry, and gas chromatography-mass spectrometry. Inorganic matter (SiO2, BaSO4, and CaCO3), alkanes, aromatic compounds, and water were the main components of OBCs. The organic content (26.14%) and alkane content of the WOBCs were higher than that of the DBCs, whereas for the inorganic content (70.87%), the reverse was true. The macro- and micromorphologies of OBCs were quite different because their oil and water contents were different. The oil contents of OBCs decreased in the order A1 (14.64%) > A3 (12.67%) > A2 (11.06%) and B1 (9.19%) > B3 (8.94%) > B2 (4.66%); the water contents decreased in the order A1 (2.99%) > A3 (2.19%) > A2 (1.09%) and B1 (2.30%) > B3 (1.87%) > B2 (1.09%). Moreover, a skid-mounted treatment technology for OBCs was proposed. The results can be a scientific guidance for the treatment and management of OBCs.

Multielemental Analysis of Low-Volume Samples Reveals Cancer-Specific Profile in Serum and Sorted Immune Cells.

We developed and validated a reliable, robust, and easy-to-implement quantitative method for multielemental analysis of low-volume samples. Our ICP-MS-based method comprises the analysis of 20 elements (Mg, P, S, K, Ca, V, Cr, Mn, Fe, Co, Cu, Zn, Se, Br, Rb, Sr, Mo, I, Cs, and Ba) in 10 µL of serum and 12 elements (Mg, S, Mn, Fe, Co, Cu, Zn Se, Br, Rb, Mo, and Cs) in less than 250 000 cells. As a proof-of-concept, we analyzed the elemental profiles of serum and sorted immune T cells derived from naïve and tumor-bearing mice. The results indicate a tumor systemic effect on the elemental profiles of both serum and T cells. Our approach highlights promising applications of multielemental analysis in precious samples such as rare cell populations or limited volumes of biofluids that could provide a deeper understanding of the essential role of elements as cofactors in biological and pathological processes.

Sugar, amino acid and inorganic ion profiling of the honeydew from different hemipteran species feeding on Abies alba and Picea abies.

Several hemipteran species feed on the phloem sap of plants and produce large amounts of honeydew that is collected by bees to produce honeydew honey. Therefore, it is important to know whether it is predominantly the hemipteran species or the host plant to influence the honeydew composition. This is particularly relevant for those botanical and zoological species from which the majority of honeydew honey originates. To investigate this issue, honeydew from two Cinara species located on Abies alba as well as from two Cinara and two Physokermes species located on Picea abies were collected. Phloem exudates of the host plants were also analyzed. Honeydew of all species contained different proportions of hexoses, sucrose, melezitose, erlose, and further di- and trisaccharides, whereas the phloem exudates of the host trees contained no trisaccharides. Moreover, the proportions of sugars differed significantly between hemipteran species feeding on the same tree species. Sucrose hydrolysis and oligosaccharide formation was shown in whole-body homogenates of aphids. The type of the produced oligosaccharides in the aphid-extracts correlated with the oligosaccharide composition in the honeydew of the different aphid species. The total contents of amino acids and inorganic ions in the honeydew were much lower than the sugar content. Glutamine and glutamate were predominant amino acids in the honeydew of all six hemipteran species and also in the phloem exudates of both tree species. Potassium was the dominant inorganic ion in all honeydew samples and also in the phloem exudate. Statistical analyses reveal that the sugar composition of honeydew is determined more by the hemipteran species than by the host plant. Consequently, it can be assumed that the sugar composition of honeydew honey is also more influenced by the hemipteran species than by the host tree.

Determining Inorganic and Organic Nitrogen.

Nitrogen (N) is one of the key nutrients for algal growth and is an integral part of many cellular components, for example in proteins. Being able to determine the inorganic and organic pools of N is consequently critical for algal cultivation. In this chapter we present the methods we use for determining dissolved inorganic nitrogen (DIN), dissolved organic nitrogen (DON), and particulate organic nitrogen (PON). The methods presented here for DIN rely on colorimetric methods and those of DON and PON on filtration and high temperature catalytic oxidation.

Determining Inorganic and Organic Phosphorus.

Phosphorus (P) is a macronutrient for all microalgal species, and the main form of uptake is orthophosphate (PO4). In this chapter we present a colorimetric method for determining the PO4 concentration and dissolved organic phosphorus (DOP) based on total phosphorus (TP) measurements. We also describe a method for determining particulate organic phosphorus (POP) based on the same principles.