Salivary, acidic and enzymatic degradation of resin composite subjected to different finishing and polishing systems.

PURPOSE: To evaluate the effect of different finishing and polishing systems on the surface roughness of a resin composite subjected to simulated saliva-, acid-, and enzyme-induced degradation. METHODS: 160 specimens (n= 40) were fabricated with Filtek Z350 XT nanofilled composite and analyzed for average surface roughness (Ra). The specimens were finished and polished using: AD - Al2O3-impreginated rubberized discs (medium, fine, and superfine grit, Sof-Lex); SD - silicon carbide and Al2O3-impregnated rubberized discs (coarse, medium and fine grit, Jiffy,); MB - 12- and 30-multiblade burs. The control group (CT) (n= 40) comprised specimens with a Mylar-strip-created surface. Specimens from each group were immersed in 1 mL of one of the degradation methods (n= 10): artificial saliva (ArS: pH 6.75), cariogenic challenge (CaC: pH 4.3), erosive challenge (ErC: 0.05M citric acid, pH 2.3) or enzymatic challenge (EzC: artificial saliva with 700 µg/mL of albumin, pH 6.75). The immersion period simulated a time frame of 180 days. Ra measurements were also performed at the post-polishing and post-degradation time points. The data were evaluated by three-way ANOVA for repeated measures and the Tukey tests. RESULTS: There was significant interaction between the finishing/polishing system and the degradation method (P= 0.001). AD presented the greatest smoothness, followed by SD. After degradation, CT, AD and SD groups became significantly rougher, but not the MB group, which presented no difference in roughness before or after degradation. CT and AD groups showed greater roughness in CaC, ErC and EzC than in ArS. The SD group showed no difference in roughness when the specimens were polished with CaC, EzC or ArS, but those treated with ErC had greater roughness. In the MB group, the lower roughness values were found after using CaC and EzC, while the higher values were found using ErC or ArS. CLINICAL SIGNIFICANCE: As far as degradation resistance of nanofilled composite to hydrolysis, bacterial and dietary acids and enzymatic reactions is concerned, restorations that had been finished and polished with Al2O3-impregnated discs had the smoothest surfaces.

Unravelling performance of honeycomb structures as drug delivery systems for the isoniazid drug using DFT-D3 correction dispersion and molecular dynamic simulations.

In this study, the potential of aluminum nitride (h-AlN), boron nitride (h-BN) and silicon carbide (h-SiC) nanosheets as the drug delivery systems (DDS) of isoniazid (INH) was scrutinized through density functional theory (DFT) and molecular dynamic (MD) simulations. We performed DFT periodic calculations on the geometry and electronic features of nanosheets adsorbed with INH by the DFT functional (DZP/GGA-PBE) employed in the SIESTA code. In the energetically favorable model, an oxygen atom of the C-O group of the INH molecule interacts with a Si atom of the h-SiC at 2.077 Å with an interaction energy of -1.361 eV. Charge transfer (CT) calculation by employing the Mulliken, Hirshfeld and Voronoi approaches reveals that the monolayers and drug molecules act as donors and acceptors, respectively. The density of states (DOS) calculations indicate that the HOMO-LUMO energy gap (HLG) of the h-SiC nanosheet declines significantly from 2.543 to 1.492 eV upon the adsorption of the INH molecule, which causes an electrical conductivity increase and then produces an electrical signal. The signal is linked to the existence of INH, demonstrating that h-SiC may be an appropriate sensor for INH sensing. The decrease in HLG for the interaction of INH and h-SiC is the uppermost (up to 41%) representing the uppermost sensitivity, whereas the sensitivity trend is σ(h-SiC) > σ(h-AlN) > σ(h-BN). Quantum theory of atoms in molecules (QTAIM) investigations is employed to scrutinize the nature of the INH/nanosheet interactions. The QTAIM analysis reveals that the interaction of the INH molecule and h-SiC has a partially covalent nature, while INH/h-AlN model electrostatic interaction occurs in the system and noncovalent and electrostatic interaction for the INH/h-BN model. Finally, the state-of-the-art DFT-MD simulations utilized in this study can mimic ambient conditions. The results obtained from the MD simulation show that it takes more time to bond the INH drug and h-SiC, and the INH/h-SiC system becomes stable. The results of the current research demonstrate the potential of h-SiC as a suitable sensor and drug delivery platform for INH drugs to remedy tuberculosis.

Planar amorphous silicon carbide microelectrode arrays for chronic recording in rat motor cortex.

Chronic implantation of intracortical microelectrode arrays (MEAs) capable of recording from individual neurons can be used for the development of brain-machine interfaces. However, these devices show reduced recording capabilities under chronic conditions due, at least in part, to the brain's foreign body response (FBR). This creates a need for MEAs that can minimize the FBR to possibly enable long-term recording. A potential approach to reduce the FBR is the use of MEAs with reduced cross-sectional geometries. Here, we fabricated 4-shank amorphous silicon carbide (a-SiC) MEAs and implanted them into the motor cortex of seven female Sprague-Dawley rats. Each a-SiC MEA shank was 8 µm thick by 20 µm wide and had sixteen sputtered iridium oxide film (SIROF) electrodes (4 per shank). A-SiC was chosen as the fabrication base for its high chemical stability, good electrical insulation properties, and amenability to thin film fabrication. Electrochemical analysis and neural recordings were performed weekly for 4 months. MEAs were characterized pre-implantation in buffered saline and in vivo using electrochemical impedance spectroscopy and cyclic voltammetry at 50 mV/s and 50,000 mV/s. Neural recordings were analyzed for single unit activity. At the end of the study, animals were sacrificed for immunohistochemical analysis. We observed statistically significant, but small, increases in 1 and 30 kHz impedance values and 50,000 mV/s charge storage capacity over the 16-week implantation period. Slow sweep 50 mV/s CV and 1 Hz impedance did not significantly change over time. Impedance values increased from 11.6 MΩ to 13.5 MΩ at 1 Hz, 1.2 MΩ-2.9 MΩ at 1 kHz, and 0.11 MΩ-0.13 MΩ at 30 kHz over 16 weeks. The median charge storage capacity of the implanted electrodes at 50 mV/s was 58.1 mC/cm2 on week 1 and 55.9 mC/cm2 on week 16, and at 50,000 mV/s, 4.27 mC/cm2 on week 1 and 5.93 mC/cm2 on week 16. Devices were able to record neural activity from 92% of all active channels at the beginning of the study, At the study endpoint, a-SiC devices were still recording single-unit activity on 51% of electrochemically active electrode channels. In addition, we observed that the signal-to-noise ratio experienced a small decline of -0.19 per week. We also classified observed units as fast and slow repolarizing based on the trough-to-peak time. Although the overall presence of single units declined, fast and slow repolarizing units declined at a similar rate. At recording electrode depth, immunohistochemistry showed minimal tissue response to the a-SiC devices, as indicated by statistically insignificant differences in activated glial cell response between implanted brains slices and contralateral sham slices at 150 µm away from the implant location, as evidenced by GFAP staining. NeuN staining revealed the presence of neuronal cell bodies close to the implantation site, again statistically not different from a contralateral sham slice. These results warrant further investigation of a-SiC MEAs for future long-term implantation neural recording studies.

Chronic toxicity of core-shell SiC/TiO2 (nano)-particles to Daphnia magna under environmentally relevant food rations in the presence of humic acid.

To date, research on the toxicity and potential environmental impacts of nanomaterials has predominantly focused on relatively simple and single-component materials, whilst more complex nanomaterials are currently entering commercial stages. The current study aimed to assess the long-term and size-dependent (60 and 500 nm) toxicity of a novel core-shell nanostructure consisting of a SiC core and TiO2 shell (SiC/TiO2, 5, 25, and 50 mg L-1) to the common model organism Daphnia magna. These novel core-shell nanostructures can be categorized as advanced materials. Experiments were conducted under environmentally realistic feeding rations and in the presence of a range of concentrations of humic acid (0.5, 2, 5, and 10 mg L-1 TOC). The findings show that although effect concentrations of SiC/TiO2 were several orders of magnitude lower than the current reported environmental concentrations of more abundantly used nanomaterials, humic acid can exacerbate the toxicity of SiC/TiO2 by reducing aggregation and sedimentation rates. The EC50 values (mean ± standard error) based on nominal SiC/TiO2 concentrations for the 60 nm particles were 28.0 ± 11.5 mg L-1 (TOC 0.5 mg L-1), 21.1 ± 3.7 mg L-1 (TOC 2 mg L-1), 18.3 ± 5.4 mg L-1 (TOC 5 mg L-1), and 17.8 ± 2.4 mg L-1 (TOC 10 mg L-1). For the 500 nm particles, the EC50 values were 34.9 ± 16.5 mg L-1 (TOC 0.5 mg L-1), 24.8 ± 5.6 mg L-1 (TOC 2 mg L-1), 28.0 ± 10.0 mg L-1 (TOC 5 mg L-1), and 23.2 ± 4.1 mg L-1 (TOC 10 mg L-1). We argue that fate-driven phenomena are often neglected in effect assessments, whilst environmental factors such as the presence of humic acid may significantly influence the toxicity of nanomaterials.

Wide bandgap semiconductor nanomembranes as a long-term biointerface for flexible, implanted neuromodulator.

Electrical neuron stimulation holds promise for treating chronic neurological disorders, including spinal cord injury, epilepsy, and Parkinson's disease. The implementation of ultrathin, flexible electrodes that can offer noninvasive attachment to soft neural tissues is a breakthrough for timely, continuous, programable, and spatial stimulations. With strict flexibility requirements in neural implanted stimulations, the use of conventional thick and bulky packages is no longer applicable, posing major technical issues such as short device lifetime and long-term stability. We introduce herein a concept of long-lived flexible neural electrodes using silicon carbide (SiC) nanomembranes as a faradic interface and thermal oxide thin films as an electrical barrier layer. The SiC nanomembranes were developed using a chemical vapor deposition (CVD) process at the wafer level, and thermal oxide was grown using a high-quality wet oxidation technique. The proposed material developments are highly scalable and compatible with MEMS technologies, facilitating the mass production of long-lived implanted bioelectrodes. Our experimental results showed excellent stability of the SiC/silicon dioxide (SiO2) bioelectronic system that can potentially last for several decades with well-maintained electronic properties in biofluid environments. We demonstrated the capability of the proposed material system for peripheral nerve stimulation in an animal model, showing muscle contraction responses comparable to those of a standard non-implanted nerve stimulation device. The design concept, scalable fabrication approach, and multimodal functionalities of SiC/SiO2 flexible electronics offer an exciting possibility for fundamental neuroscience studies, as well as for neural stimulation-based therapies.

Fabrication and nanophotonic waveguide integration of silicon carbide colour centres with preserved spin-optical coherence.

Optically addressable spin defects in silicon carbide (SiC) are an emerging platform for quantum information processing compatible with nanofabrication processes and device control used by the semiconductor industry. System scalability towards large-scale quantum networks demands integration into nanophotonic structures with efficient spin-photon interfaces. However, degradation of the spin-optical coherence after integration in nanophotonic structures has hindered the potential of most colour centre platforms. Here, we demonstrate the implantation of silicon vacancy centres (VSi) in SiC without deterioration of their intrinsic spin-optical properties. In particular, we show nearly lifetime-limited photon emission and high spin-coherence times for single defects implanted in bulk as well as in nanophotonic waveguides created by reactive ion etching. Furthermore, we take advantage of the high spin-optical coherences of VSi centres in waveguides to demonstrate controlled operations on nearby nuclear spin qubits, which is a crucial step towards fault-tolerant quantum information distribution based on cavity quantum electrodynamics.

Low-energy Ar+ and N+ ion beam induced chemical vapor deposition using hexamethyldisilazane for the formation of nitrogen containing SiC and carbon containing SiN films.

We proposed an experimental methodology for producing films on substrates with an ion beam induced chemical vapor deposition (IBICVD) method using hexamethyldisilazane (HMDS) as a source material. In this study, both HMDS and ion beam were simultaneously injected onto a Si substrate. We selected Ar+ and N+ as the ion beam. The energy of the ion beam was 101 eV. Temperature of the Si substrate was set at 540 °C. After the experiments, films were found to be deposited on the substrates. The films were then analyzed by Fourier transform infrared (FTIR) spectroscopy, stylus profilometer, X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy (XPS). The FTIR and XPS results showed that silicon carbide films containing small amount of nitrogen were formed when Ar+ ions were injected in conjunction with HMDS. On the other hand, in the cases of N+ ion beam irradiation, silicon nitride films involving small amount of carbon were formed. It was noted that no film deposition was observed when HMDS alone was supplied to the substrates without any ion beam injections.

Porous Silicon Carbide (SiC): A Chance for Improving Catalysts or Just Another Active-Phase Carrier?

There is an obvious gap between efforts dedicated to the control of chemicophysical and morphological properties of catalyst active phases and the attention paid to the search of new materials to be employed as functional carriers in the upgrading of heterogeneous catalysts. Economic constraints and common habits in preparing heterogeneous catalysts have narrowed the selection of active-phase carriers to a handful of materials: oxide-based ceramics (e.g. Al2O3, SiO2, TiO2, and aluminosilicates-zeolites) and carbon. However, these carriers occasionally face chemicophysical constraints that limit their application in catalysis. For instance, oxides are easily corroded by acids or bases, and carbon is not resistant to oxidation. Therefore, these carriers cannot be recycled. Moreover, the poor thermal conductivity of metal oxide carriers often translates into permanent alterations of the catalyst active sites (i.e. metal active-phase sintering) that compromise the catalyst performance and its lifetime on run. Therefore, the development of new carriers for the design and synthesis of advanced functional catalytic materials and processes is an urgent priority for the heterogeneous catalysis of the future. Silicon carbide (SiC) is a non-oxide semiconductor with unique chemicophysical properties that make it highly attractive in several branches of catalysis. Accordingly, the past decade has witnessed a large increase of reports dedicated to the design of SiC-based catalysts, also in light of a steadily growing portfolio of porous SiC materials covering a wide range of well-controlled pore structure and surface properties. This review article provides a comprehensive overview on the synthesis and use of macro/mesoporous SiC materials in catalysis, stressing their unique features for the design of efficient, cost-effective, and easy to scale-up heterogeneous catalysts, outlining their success where other and more classical oxide-based supports failed. All applications of SiC in catalysis will be reviewed from the perspective of a given chemical reaction, highlighting all improvements rising from the use of SiC in terms of activity, selectivity, and process sustainability. We feel that the experienced viewpoint of SiC-based catalyst producers and end users (these authors) and their critical presentation of a comprehensive overview on the applications of SiC in catalysis will help the readership to create its own opinion on the central role of SiC for the future of heterogeneous catalysis.

Bone screws of porous silicon carbide coated with tantalum improve osseointegration and osteogenesis in goat femoral neck fractures.

Traditional metal materials, such as stainless steel and titanium (Ti) alloys, are still the gold standards for fracture fixation. However, the elastic moduli of these materials differ from that of human cortical bone, and the stress shielding effect affects fracture healing, leading to secondary fractures. Herein, a new porous Ta coated SiC (pTa-SiC) scaffold using in internal fixation devices with good mechanical and biological properties was prepared based on porous silicon carbide (SiC) scaffold and tantalum (Ta) metal. The osteogenic and osseointegration properties of the pTa-SiC scaffold were investigated by bothin vitroandin vivotests. The results showed that compared with porous titanium (pTi), the pTa-SiC promoted the proliferation, migration, and osteogenic differentiation of human bone marrow-derived mesenchymal stem cells. Moreover, the internal fixation tests were carried out in a goat load-bearing femoral neck fracture model. Histological results showed good osseointegration around the pTa-SiC screws. And the acid etching results showed that bone cells grew tightly on the pTa-SiC throughout bone canaliculi, and the growth mode was contact osteogenesis, which indicated good biological fixation effects. Therefore, it is reasonable to be expected that the new pTa-SiC scaffold with excellent mechanical and biological properties could be a promising candidate for bone implant field.

Photothermal treatment of oropharyngeal cancer with carbon-defective silicon carbide.

Oral squamous carcinoma (OSCC) is a clinical common tumor with high recurrence rate and low 5 year survival rate. In this work, photothermal antitumor treatment has been performed to treat OSCC by taking anti-wound infection into consideration. By introducing C defects, we have successfully converted the semi-conductive SiC into metallic carbon-defective silicon carbide (SiC1-x), and endowed it with the near infrared absorption property for photothermal therapy (PTT). The results revealed that SiC1-x mediated PTT treatment could remove solid OSCC tumor in a biosafe way, showing low hematotoxicity, cytotoxicity and tissue toxicity. Moreover, the low invasion of PTT treatment could not only prevent the invasion of bacteria, but also realize an antibacterial effect on the wound, both of which are important for oral surgery. SiC1-x could be excreted from the body post treatment, which thus reduces the long-term potential toxicity. On the whole, this study provided a promising way to treat OSCC in an effective and safe way.

Material-assisted mass spectrometric analysis of low molecular weight compounds for biomedical applications.

Low molecular weight compounds play an important role in encoding the current physiological state of an individual. Laser desorption/ionization mass spectrometry (LDI MS) offers high sensitivity with low cost for molecular detection, but it is not able to cover small molecules due to the drawbacks of the conventional matrix. Advanced materials are better alternatives, showing little background interference and high LDI efficiency. Herein, we first classify the current materials with a summary of compositions and structures. Matrix preparation protocols are then reviewed, to enhance the selectivity and reproducibility of MS data better. Finally, we highlight the biomedical applications of material-assisted LDI MS, at the tissue, bio-fluid, and cellular levels. We foresee that the advanced materials will bring far-reaching implications in LDI MS towards real-case applications, especially in clinical settings.

The Analysis of Micro-Scale Deformation and Fracture of Carbonized Elastomer-Based Composites by In Situ SEM.

Carbonized elastomer-based composites (CECs) possess a number of attractive features in terms of thermomechanical and electromechanical performance, durability in aggressive media and facile net-shape formability, but their relatively low ductility and strength limit their suitability for structural engineering applications. Prospective applications such as structural elements of micro-electro-mechanical systems MEMS can be envisaged since smaller principal dimensions reduce the susceptibility of components to residual stress accumulation during carbonization and to brittle fracture in general. We report the results of in situ in-SEM study of microdeformation and fracture behavior of CECs based on nitrile butadiene rubber (NBR) elastomeric matrices filled with carbon and silicon carbide. Nanostructured carbon composite materials were manufactured via compounding of elastomeric substance with carbon and SiC fillers using mixing rolling mill, vulcanization, and low-temperature carbonization. Double-edge notched tensile (DENT) specimens of vulcanized and carbonized elastomeric composites were subjected to in situ tensile testing in the chamber of the scanning electron microscope (SEM) Tescan Vega 3 using a Deben microtest 1 kN tensile stage. The series of acquired SEM images were analyzed by means of digital image correlation (DIC) using Ncorr open-source software to map the spatial distribution of strain. These maps were correlated with finite element modeling (FEM) simulations to refine the values of elastic moduli. Moreover, the elastic moduli were derived from unloading curve nanoindentation hardness measurements carried out using a NanoScan-4D tester and interpreted using the Oliver-Pharr method. Carbonization causes a significant increase of elastic moduli from 0.86 ± 0.07 GPa to 14.12 ± 1.20 GPa for the composite with graphite and carbon black fillers. Nanoindentation measurements yield somewhat lower values, namely, 0.25 ± 0.02 GPa and 9.83 ± 1.10 GPa before and after carbonization, respectively. The analysis of fractography images suggests that crack initiation, growth and propagation may occur both at the notch stress concentrator or relatively far from the notch. Possible causes of such response are discussed, namely, (1) residual stresses introduced by processing; (2) shape and size of fillers; and (3) the emanation and accumulation of gases in composites during carbonization.

Portable electrochemical carbon cloth analysis device for differential pulse anodic stripping voltammetry determination of Pb2.

A novel electrochemical carbon cloth (CC) analysis device (eCAD) is proposed for the determination of Pb2+ in environmental water samples, which was assembled using a single-step functional CC as both the sensing and the substrate material. The modified CC was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectra, and electrochemical impedance spectroscopy. The increase in electrochemical activity is due to the increased defective extent and excellent electrochemical activity of CC. Under optimum conditions (viz. a pH value of 4.5, deposition time of 160 s), the sensor is capable of determining Pb2+ by differential pulse anodic stripping voltammetry (DPASV) at a typical working potential of - 1.0 V (vs. Ag/AgCl). Response is linear from 5.0 × 10-9 to 3.0 × 10-6 M Pb2+, and the detection limit is 4.8 nM (at S/N = 3). The sensor was successfully applied to the determination of Pb2+ in real samples, with apparent recoveries from 96.0 to 102.0% and a relative standard deviation of less than 3.4%. In addition, the integration of the sensor with signal collection components has enabled us to realize on-site analysis of Pb2+, which is highlighted as a new generation of electrode platform for the development of a portable analysis device.Graphical abstract.

Fundamental research on semiconductor SiC and its applications to power electronics.

Today, the silicon carbide (SiC) semiconductor is becoming the front runner in advanced power electronic devices. This material has been considered to be useful for abrasive powder, refractory bricks as well as ceramic varistors. Big changes have occurred owing to the author's inspirational idea in 1968 to "make transistors from unusual material". The current paper starts by describing the history of SiC research involving fundamental studies by the author's group: unique epitaxial crystal growth techniques, the physical characterization of grown layers and processes for device fabrication. Trials for fabricating SiC power devices and their characteristics conducted until 2004 are precisely described. Recent progress in SiC crystal growth and peripheral techniques for SiC power devices are introduced. Finally, the present progress concerning SiC power devices is introduced together with the implementation of those devices in society.

SiC-functionalized fluorescent aptasensor for determination of Proteus mirabilis.

Aptamer-modified SiC quantum dots (DNA-SiC QDs) as fluorescent aptasensor are described for the determination of Proteus mirabilis. The SiC QDs were synthesized through one-pot hydrothermal method with particle sizes of about 14 nm. The amino-modified aptamers against P. mirabilis were conjugated to the surfaces of SiC QDs for bacteria recognition. The aptamer with an affinity for target protein can bound to P. mirabilis and this causes a decrease in the fluorescence intensity of DNA-SiC QDs. P. mirabilis levels were tested by the aptasensor within 35 min with fluorescence excitation/emission maxima at 320/420 nm. The linear range is from 103 to 108 CFU mL-1 and the limit of detection is 526 CFU mL-1 (S/N = 3). The aptasensor was used for determination of P. mirabilis in pure milk samples and obtained good accuracy (87.6-104.5%) and recovery rates (85-110.2%) were obtained. The detection in simulated forensic identification samples (pure milk, milk powder, blood, and urine) obtained gave satisfactory coincidence rates with the method of bacterial isolation and identification as standard. These results demonstrate that the fluorescent aptasensor is a potential tool for identification of P. mirabilis in forensic food poisoning cases. Graphical abstract Determination of P. mirabilis is based on SiC QDs fluorescence aptasensor. The SiC QDs with plentiful carboxyl groups on the surface can be synthesized via one-pot hydrothermal route. After activated by EDC/NHS, the SiC QDs can bind to aptamer to form fluorescence aptasensors. When the target P. mirabilis exists, the fluorescence of aptasensor will be quenched and the determination of the P. mirabilis based on the fluorescence change can be analyzed.

Direct Conversion of Rice Husks to Nanostructured SiC/C for CO2 Photoreduction.

A one-step and template-free synthesis of a SiC nanowires/C (SiC-NW/C) composite from rice husks (RHs) is realized via a molten-salt-assisted electrochemical method. The process integrates simultaneously carbonization, electrodeoxidation, nanostructuring, and self-purification for converting RHs to a SiC-NW/C hybrid that is assembled from SiC NWs embedded in porous N-doped graphitic carbon with strong coupling. The SiC-NW/C nanostructure enables efficient CO2 adsorption and fast separation and transfer of charge carriers. Benefiting from the structural and compositional merits, the SiC-NW/C composite shows superior activity for photoreduction of CO2 to CO, in the absence of any additional cocatalysts or sacrificial agents. The process proposed herein might help to bridge a closed-loop carbon cycle in the whole production-utilization of biomass.

Synthesis and characterization of porous bioactive SiC tissue engineering scaffold.

Silicon carbide (SiC) is an inert material with excellent biocompatibility properties. A major issue that limits its use as a medical device is the difficult processing technique that requires hot pressing at a temperature (>2,000o C) and pressure (1,000-2,000 atm). In the present study, we developed a protocol to synthesize a porous SiC scaffold by pressing the powder at 50 MPa and heating at 900o C/2 hr. The surface of SiC was chemically modified by NaOH to facilitate sintering and induce bioactivity. Porous discs with 51.51 ± 3.17% porosity and interconnected pores in the size range from 1 to 1,000 µm were prepared using 40% PEG. The average compressive strength and Young's modulus of the scaffolds were 1.94 ± 0.70 and 169.2 ± 0.08 MPa, respectively. FTIR analysis confirmed the formation of biomimetic hydroxyapatite layer after 2 hr of immersion in simulated body fluid. The Ca/P ratio was dependent on the concentration of the silanol groups created on the material surface. Increasing the atomic % of silicon on the SiC surface from 33.27 ± 9.53% to 45.13 ± 4.74% resulted in a 76% increase in the osteocalcin expression by MC3T3-E1 cells seeded on the material after 7 days. The cells colonized the entire thickness of the template and filled the pores with mineralized extracellular matrix after 14 days. Taken all together, the porous SiC scaffolds can serve as a bone graft for tissue reconstruction and cell delivery in trauma surgery.

ß-Hydroxybutyrate dehydrogenase decorated MXene nanosheets for the amperometric determination of ß-hydroxybutyrate.

MXene nanosheets of type Ti3C2Tx were modified with ß-hydroxybutyrate dehydrogenase and then used as a biosensor for amperometric sensing of ß-hydroxybutyrate. The MXene and the nanocomposite were characterized by X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The MXene has a layered structure and proved to be an excellent immobilization matrix providing good compatibility with the enzyme ß-hydroxybutyrate dehydrogenase. The MXene-based biosensor, best operated at a potential of - 0.35 V (vs. Ag/AgCl), displays a wide linear range (0.36 to 17.9 mM), a sensitivity of 0.480 µA mM-1 cm-2, and a low detection limit (45 µM). The biosensor was successfully applied to the determination of ß-hydroxybutyrate in (spiked) real serum samples. Graphical abstract Schematic representation of the synthesis and decoration of Mxene 2D sheets with ß-hydroxybutyrate dehydrogenase for the amperometric determination of ß-hydroxybutyric acid.

Microwave-induced release and degradation of airborne antibiotic resistance genes (ARGs) from Escherichia coli bioaerosol based on microwave absorbing material.

Antibiotic resistance genes (ARGs) have been detected in the atmosphere. Airborne ARGs transmission threatens human health. In the present study, we investigated the release and degradation of airborne ARGs from Escherichia coli bioaerosol through microwave (MW) irradiation. In this study, a new MW absorbing material (Fe3O4@SiC ceramic foam) that contributed to its stronger MW absorption is presented. When the MW input energy density was 7.4 × 103 kJ/m3, the concentration of airborne Escherichia coli decreased by 4.4 log. Different DNA forms were found in the air because MW irradiation ruptured cell membranes. The bound particles provide more protection for bound DNA in the degradation process than free DNA. After the self-degradation of the released airborne free ARGs, some of them would remain and continue to spread in the atmosphere. The released airborne free ARGs cannot be ignored. Total ARGs concentrations decrease rapidly with increased temperature. The inactivation rate constant of ARGs through MW irradiation is higher than that through the Fenton and UV, however, the energy efficiency per order of MW irradiation is lower. Therefore, MW irradiation with Fe3O4@SiC ceramic foam could efficiently degrade the distribution of ARGs in the atmosphere.

In Vitro Cytocompatibility Assessment of Ti-Modified, Silicon-oxycarbide-Based, Polymer-Derived, Ceramic-Implantable Electrodes under Pacing Conditions.

Polymer-derived ceramics (PDC) have recently gained increased interest in the field of bioceramics. Among PDC's, carbon-rich silicon oxycarbide ceramics (SiOC) possess good combined electrical and mechanical properties. Their durability in aggressive environments and proposed cytocompatibility makes them an attractive material for fabrication of bio-MEMS devices such as pacemaker electrodes. The aim of the present study is to demonstrate the remarkable mechanical and electrical properties, biological response of PDCs modified with titanium (Ti) and their potential for application as pacemaker electrodes. Therefore, a new type of SiOC modified with Ti fillers was synthesized via PDC route using a Pt-catalyzed hydrosilylation reaction. Preceramic green bodies were pyrolyzed at 1000 °C under an argon atmosphere to achieve amorphous ceramics. Electrical and mechanical characterization of SiCxO2(1-x)/TiOxCy ceramics revealed a maximum electrical conductivity of 10 S cm-1 and a flexural strength of maximal 1 GPa, which is acceptable for pacemaker applications. Ti incorporation is found to be beneficial for enhancing the electrical conductivity of SiOC ceramics and the conductivity values were increased with Ti doping and reached a maximum for the composition with 30 wt % Ti precursor. Cytocompatibility was demonstrated for the PDC SiOC ceramics as well as SiOC ceramics modified with Ti fillers. Cytocompatibility was also demonstrated for SiTiOC20 electrodes under pacing conditions by monitoring of cells in an in vitro 3D environment. Collectively, these data demonstrate the great potential of polymer-derived SiOC ceramics to be used as pacemaker electrodes.