RESUMO
OBJECTIVES: To analyze the differences in cusp height on radiographs, establishing proportional relationships between cusp and alveolar bone crest (ABC) measurements. The goal of this study was to develop a correction coefficient by considering this proportion. MATERIALS AND METHODS: Twenty-one artificial teeth, molars and premolars, and bovine ribs were used. Interproximal radiographs were taken with the aid of a positioner. The vertical angles used were: 0°, + 5°, and + 10°, and processed using three spatial resolutions measured in line pairs per mm (lp/mm): 20, 25 and 40. The Perio filter was applied to each image, in addition to the original one. Combinations of angle, resolution, and filter were made. Eighteen images were analyzed by three specialists, resulting in 252 measurements for each evaluator, totaling 756 measurements. RESULTS: The overall variability of the measurements can be explained mainly by the variation in tooth anatomy. The 0° 25 lp/mm Perio filter method was the closest one to the actual clinical scenario for both cusps and ABC. The correction factor managed to explain 71.45% of the errors. CONCLUSIONS: The variation in vertical angulation interferes with cusp and ABC measurements, and the angulation at 0º and spatial resolution of 25 lp/mm showed better results. The use of correction coefficients allowed approaching actual measurement values. CLINICAL RELEVANCE: More accurate ABC height measurements are essential even in radiographic exams that do not meet the standard of excellence because the need to repeat radiographic exams is then eliminated.
Assuntos
Processo Alveolar , Projetos Piloto , Animais , Processo Alveolar/diagnóstico por imagem , Processo Alveolar/anatomia & histologia , Bovinos , Radiografia Dentária , Costelas/diagnóstico por imagem , Costelas/anatomia & histologia , Humanos , Técnicas In Vitro , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anatomia & histologiaRESUMO
BACKGROUND AND AIM: 3D fusion model of cone-beam computed tomography (CBCT) and oral scanned data can be used for the accurate design of root canal access and guide plates in root canal therapy (RCT). However, the pose accuracy of the dental pulp and crown in data registration has not been investigated, which affects the precise implementation of clinical planning goals. We aimed to establish a novel registration method based on pulp horn mapping surface (PHMSR), to evaluate the accuracy of PHMSR versus traditional methods for crown-pulp registration of CBCT and oral scan data. MATERIALS AND METHODS: This vitro study collected 8 groups of oral scanned and CBCT data in which the left mandibular teeth were not missing, No. 35 and No. 36 teeth were selected as the target teeth. The CBCT and scanned model were processed to generate equivalent point clouds. For the PHMSR method, the similarity between the feature directions of the pulp horn and the surface normal vectors of the crown were used to determine the mapping points in the CBCT point cloud that have a great influence on the pulp pose. The small surface with adjustable parameters is reconstructed near the mapping point of the crown, and the new matching point pairs between the point and the mapping surface are searched. The sparse iterative closest point (ICP) algorithm is used to solve the new matching point pairs. Then, in the C + + programming environment with a point cloud library (PCL), the PHMSR, the traditional sparse ICP, ICP, and coherent point drift (CPD) algorithms are used to register the point clouds under two different initial deviations. The root square mean error (RSME) of the crown, crown-pulp orientation deviation (CPOD), and position deviation (CPPD) were calculated to evaluate the registration accuracy. The significance between the groups was tested by a two-tailed paired t-test (p < 0.05). RESULTS: The crown RSME values of the sparse ICP method (0.257), the ICP method (0.217), and the CPD method (0.209) were not significantly different from the PHMSR method (0.250). The CPOD and CPPD values of the sparse ICP method (4.089 and 0.133), the ICP method (1.787 and 0.700), and the CPD method (1.665 and 0.718) than for the PHMSR method, which suggests that the accuracy of crown-pulp registration is higher with the PHMSR method. CONCLUSION: Compared with the traditional method, the PHMSR method has a smaller crown-pulp registration accuracy and a clinically acceptable deviation range, these results support the use of PHMSR method instead of the traditional method for clinical planning of root canal therapy.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Polpa Dentária , Imageamento Tridimensional , Tomografia Computadorizada de Feixe Cônico/métodos , Humanos , Polpa Dentária/diagnóstico por imagem , Técnicas In Vitro , Imageamento Tridimensional/métodos , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anatomia & histologia , Modelos Dentários , Tratamento do Canal Radicular/métodos , Estudo de Prova de ConceitoRESUMO
The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Dente Canino , Odontologia Legal , Caracteres Sexuais , Coroa do Dente , Raiz Dentária , Humanos , Dente Canino/diagnóstico por imagem , Dente Canino/anatomia & histologia , Feminino , Masculino , Pessoa de Meia-Idade , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anatomia & histologia , Idoso , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/anatomia & histologia , Adulto , Odontologia Legal/métodos , Idoso de 80 Anos ou mais , Adulto Jovem , Odontometria/métodos , Maxila/diagnóstico por imagem , Maxila/anatomia & histologiaRESUMO
BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.
Assuntos
Displasia Cleidocraniana , Tomografia Computadorizada de Feixe Cônico , Imageamento Tridimensional , Dente Supranumerário , Humanos , Displasia Cleidocraniana/diagnóstico por imagem , Displasia Cleidocraniana/complicações , Dente Supranumerário/diagnóstico por imagem , Imageamento Tridimensional/métodos , Adolescente , Masculino , Feminino , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anormalidades , Coroa do Dente/patologia , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/anormalidades , Odontometria/métodos , Adulto Jovem , Mandíbula/diagnóstico por imagem , Mandíbula/anormalidades , Dente Pré-Molar/anormalidades , Dente Pré-Molar/diagnóstico por imagem , Maxila/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodosRESUMO
BACKGROUND: With the development and utilization of three-dimensional (3D) intraoral scanning (IOS) technology, the morphological characteristics of teeth were quantitatively assessed. In this research, we aimed to explore the prevalence of dental caries in relation to each measurable morphological indicator of the tooth body via 3D intraoral scanning techniques. METHODS: A hospital-based single-centre study was conducted at our hospital from Dec. 2021 to Apr. 2023. A total of 53 patients were involved in the study, providing complete morphological data for 79 teeth. Each patient completed an oral hygiene routine questionnaire and underwent examination by an experienced dentist to evaluate caries conditions before undergoing 3D intraoral scanning to obtain a digital dental model. Geomagic Studio 2014 was used to extract oral morphological data from the models. The acquired data were entered, cleaned and edited using Excel 2016 and subsequently exported to SPSS version 25.0 for analysis. Chi-square analysis and logistic regression analyses were employed to test the associations. RESULTS: Among the participants, 33 (61.1%) were female, with a mean age of 26.52 ± 10.83 years. Significant associations were found between dental caries and the vertical distance between the distal tip and the gum (OR 14.02; 95% CI 1.80-109.07; P = 0.012), the distal lateral horizontal distance of occlusion (OR 0.40; 95% CI 0.18-0.90; P = 0.026), and the mesial horizontal distance of occlusion (OR 2.20; 95% CI 1.12-4.31; P = 0.021). The Hosmer-Lemeshow test indicated a P value of 0.33. CONCLUSIONS: The vertical distance between the distal tip and the gum, the distal lateral horizontal distance of the occlusion and the mesial horizontal distance of the occlusion were the influencing factors for dental caries (identified as independent risk factors). We hypothesize that these factors may be associated with the physiological curvature of teeth and the role of chewing grooves in plaque formation over time. However, further studies involving larger population samples and more detailed age stratification are still needed.
Assuntos
Cárie Dentária , Imageamento Tridimensional , Coroa do Dente , Humanos , Cárie Dentária/diagnóstico por imagem , Cárie Dentária/patologia , Feminino , Masculino , Imageamento Tridimensional/métodos , Adulto , Coroa do Dente/patologia , Coroa do Dente/diagnóstico por imagem , AdolescenteRESUMO
Morphological variation in modern human dentition is still an open field of study. The understanding of dental shape and metrics is relevant for the advancement of human biology and evolution and is thus of interest in the fields of dental anthropology, as well as human anatomy and medicine. Of concern is also the variation of the inner aspects of the crown which can be investigated using the tools and methods of virtual anthropology. In this study, we explored inter- and intra-population morphometric variation of modern humans' upper third and fourth premolars (P3s and P4s, respectively) considering both the inner and outer aspects of the crown, and discrete traits. We worked by means of geometric morphometrics on 3D image data from a geographically balanced sample of human populations from five continents, to analyse the shape of the dentinal crown, and the crown outline in 78 P3s and 76 P4s from 85 individuals. For the study of dental traits, we referred to the Arizona State University Dental Anthropology System integrated with more recent classification systems. The 3D shape variation of upper premolar crowns varied between short and mesio-distally broad, and tall and mesio-distally narrow. The observed shape variation was independent from the geographical origin of the populations, and resulted in extensive overlap. We noted a high pairwise correlation (r1 = 0.83) between upper P3s and P4s. We did not find any significant geographic differences in the analysed non-metric traits. Our outcomes thus suggest that geographical provenance does not play a determinant role in the shaping of the dental crown, whose genesis is under strict genetic control.
Assuntos
Antropologia Física , Hominidae , Animais , Humanos , Dente Pré-Molar/diagnóstico por imagem , Dente Pré-Molar/anatomia & histologia , Hominidae/anatomia & histologia , Antropologia , Coroa do Dente/diagnóstico por imagem , Coroa do Dente/anatomia & histologiaRESUMO
OBJECTIVE: The present study investigated bone remodelling in the upper and lower incisor regions depending on the inclination pattern during the alignment phase of orthodontic treatment (OT). MATERIALS AND METHODS: This prospective clinical study included 71 patients undergoing OT without premolar extraction. Cone beam computed tomography scans were taken before and after the alignment phase and the changes in the inclination, alveolar bone height (ABH) and bone thickness (BT) at levels 2, 3, 4, 6, 8 and 9 mm starting from the cementoenamel junction (CEJ) were determined. RESULTS: Teeth were divided into 'Retroinclination' (lingual crown inclination <0°), 'Proclination-low' (buccal crown inclination between 0° and 5°), or 'Proclination-high' (buccal crown inclination >5°). The alignment phase of OT resulted in ABH loss. The highest ABH loss in the maxilla was observed on the buccal side in the 'Proclination-high' and was 0.71 mm. ABH loss by 1.1 mm was observed in the mandible on the lingual side in the 'Retroinclination' group. The most significant changes in BT by up to 2 mm were observed at levels 6, 8 and 9 mm and these changes exhibited a moderate to strong correlation with the alterations in the inclination of individual incisors. At levels 2, 3 and 4 mm, the highest decrease in BT by up to 0.83 mm was observed on the palatal side of upper incisors in the 'Proclination-high' group. CONCLUSION: The direction and amount of tooth inclination partially determine changes in the bone parameters during the alignment phase.
Assuntos
Processo Alveolar , Tomografia Computadorizada de Feixe Cônico , Incisivo , Técnicas de Movimentação Dentária , Humanos , Incisivo/diagnóstico por imagem , Incisivo/anatomia & histologia , Processo Alveolar/diagnóstico por imagem , Processo Alveolar/anatomia & histologia , Feminino , Estudos Prospectivos , Masculino , Técnicas de Movimentação Dentária/métodos , Adolescente , Remodelação Óssea/fisiologia , Coroa do Dente/anatomia & histologia , Coroa do Dente/diagnóstico por imagem , Adulto Jovem , Maxila/diagnóstico por imagem , Maxila/anatomia & histologia , Mandíbula/diagnóstico por imagem , Mandíbula/anatomia & histologia , Dente Pré-Molar/diagnóstico por imagem , Dente Pré-Molar/anatomia & histologia , AdultoRESUMO
INTRODUCTION: Clear aligner technology based on a machine learning algorithm is currently available for orthodontic treatment. Treatment planning on the basis of 3-dimensional crown, root, and bone imaging is claimed to provide accurate diagnosis and better treatment outcomes for adult patients with complex needs. This study aimed to answer the following questions: (1) would practitioners modify their original treatment plan once provided with the crown, root, and bone view? and (2) does practitioner satisfaction regarding treatment outcomes change once the crown, root, and bone view is provided? METHODS: An online questionnaire was emailed to members of the American Association of Orthodontists (n = 2300) and the Virginia Orthodontic Education and Research Foundation (n = 211). The survey consisted of videos of 4 patients shown in 2 presentations: crown-only and crown, root, and bone views, generated by artificial intelligence-driven treatment planning software (3D Predict aligner system; 3D Predict, New York, NY). Respondents were asked to answer treatment-related questions and rate the treatment outcomes using a visual analog scale. Statistical analyses were completed to determine the significance of crown, root, and bone view on treatment planning with clear aligners. RESULTS: A total of 70 orthodontists participated in the survey. There were significant differences in responses when viewing patients in crown-only and crown, root, and bone presentations. Across the 4 patients, 33%-43% of practitioners changed their sentiment toward the treatment plan (P <0.001). When rating satisfaction on the 100-point scale, average ratings changed by 10.6 to 21.0 points; both increases and decreases in satisfaction were seen across the patients (P <0.001). CONCLUSIONS: When given 3-dimensional information on the position of a patient's crowns, root, and bone coverage, orthodontists are likely to change their clear aligner treatment plan. This study showed that a confirmation of dehiscence and fenestrations using the root and bone view resulted in practitioner dissatisfaction despite an initial satisfaction with the crown-only view.
Assuntos
Imageamento Tridimensional , Raiz Dentária , Humanos , Raiz Dentária/diagnóstico por imagem , Imageamento Tridimensional/métodos , Planejamento de Assistência ao Paciente , Coroa do Dente/diagnóstico por imagem , Inquéritos e Questionários , Tomada de Decisão Clínica , Adulto , Resultado do TratamentoRESUMO
PURPOSE: The purpose of this study was to determine how the surgeon's decision to perform a mandibular third molar coronectomy or surgical removal is associated with the impaction pattern as classified using Pell and Gregory or Winter's system. METHODS: This observational, cross-sectional study was conducted on 813 mandibular third molars belonging to 565 patients. All patients were referred for removal of the mandibular third molar and had radiographic signs indicating a close relationship with the inferior alveolar nerve. Panoramic images were classified according to the impaction pattern. RESULTS: A coronectomy was performed on 492 (60.5%) mandibular third molars. Most impacted mandibular third molars were class IIB with a mesioangular inclination. A significant association was found between the Pell and Gregory classification and the surgeon's choice (p = 0.002). Winter's classification was not significantly associated with surgeon choice (p = 0.425). CONCLUSION: Mandibular third molar coronectomy is chosen more frequently than surgical removal if molars are class III and position B. TRIAL REGISTRATION NUMBER: Not applicable.
Assuntos
Mandíbula , Dente Serotino , Radiografia Panorâmica , Dente Impactado , Humanos , Dente Serotino/cirurgia , Dente Serotino/diagnóstico por imagem , Estudos Transversais , Dente Impactado/cirurgia , Dente Impactado/classificação , Dente Impactado/diagnóstico por imagem , Masculino , Mandíbula/cirurgia , Feminino , Adulto , Extração Dentária , Adolescente , Coroa do Dente/cirurgia , Coroa do Dente/diagnóstico por imagem , Adulto Jovem , Pessoa de Meia-IdadeRESUMO
INTRODUCTION: This study investigated the effects of different timings of orthodontic treatment on the root development of impacted anterior teeth in children. METHODS: The cone-beam computed tomography (CBCT) data of 45 children with impacted anterior teeth were divided into unformed root (UR) group or basically formed root (BFR) group to evaluate root length (RL) and root growth length (RGL) of impacted teeth and contralateral nonimpacted teeth pretreatment and posttreatment. In addition, 22 patients with impacted dilaceration were selected to assess the effects of the crown-root angle and root development stage on RL and RGL. The Student t test, Wilcoxon test, analysis of variance, and multiple linear regression analysis were used for statistical evaluations. RESULTS: The RL of treated impacted teeth pretreatment and posttreatment was significantly shorter than contralateral nonimpacted teeth values (P <0.05). Posttreatment, the RL and RGL of impacted teeth of the UR group were significantly greater than those of the BFR group (P <0.05). The RGL of the dilacerated root in the UR group was considerably higher than in the BFR group (P <0.05). The larger crown-root angle group had a longer posttreatment RL (P <0.05). Multiple linear regression analysis revealed that the Nolla stage of impacted teeth and RL of contralateral teeth pretreatment significantly influenced the RL of impacted teeth posttreatment. CONCLUSIONS: Prompt orthodontic treatment is necessary for children with impacted anterior teeth to release the impacted state and achieve better root development. The root length of a dilacerated tooth continued to develop under treatment, but the crown-root angle partly constrained it.
Assuntos
Dente Impactado , Criança , Humanos , Dente Impactado/diagnóstico por imagem , Dente Impactado/terapia , Raiz Dentária/diagnóstico por imagem , Incisivo/diagnóstico por imagem , Coroa do Dente/diagnóstico por imagem , Coroas , Tomografia Computadorizada de Feixe Cônico/métodos , MaxilaRESUMO
AIM: The aim of this case series study is to describe where the crowns of the permanent mandibular canines are located in early childhood in relation to the preceding primary canines. MATERIALS AND METHODS: From a sample of 31 orthopantomograms from children, younger than 5 years of age, the location of the mandibular canines was analysed by visual inspection. The radiographs were taken due to different deviations in the dentition and forwarded during a period of 28 years for elucidating different diagnostic questions. From an embryological point of view, the primary canine was considered as a stable structure in the jawbone. A longitudinal axis through the primary canine was named the canine axis. The initial site of the permanent crown was the site, where the permanent lamina "placed" the tooth bud for final development. A normal site was determined when the canine axis passed though the permanent crown and a pathological site was determined when this did not happen. RESULTS: Normal sites for the permanent crowns were observed in 19 cases and abnormal sites in 8 cases. In four cases, the interrelationship between the canine axis and the permanent crown could not be decided. The study demonstrated that the tooth germ for the permanent canine can start initial formation misplaced distally or mesially to the preceding primary tooth. CONCLUSION: The study demonstrates different malpositions of the initial crowns of the permanent mandibular canines in children younger than 5 years of age. The results are considered of importance for future understanding of the aetiology behind ectopic mandibular canines.
Assuntos
Dente Canino , Maxila , Humanos , Criança , Pré-Escolar , Maxila/patologia , Radiografia Panorâmica , Dente Canino/diagnóstico por imagem , Mandíbula/diagnóstico por imagem , Coroa do Dente/diagnóstico por imagemRESUMO
INTRODUCTION: This study aimed to obtain information on the relationship between crown and root in terms of morphology - dimensions and crown-root angles -to be used for orthodontic set-ups without the use of radiological examinations. MATERIAL AND METHODS: All the good quality CBCTs of patients obeying the eligibility criteria, from 2000 to 2015, were analysed. All teeth were analysed except for third molars. Six variables were evaluated: crown (CL) and root length (RL), crown width (CW), root width (RW), crown-root angles in both the frontal (CR-frontal) and sagittal plane (CR-sagittal). All teeth were divided into 3 groups according to number of root (single, two, three-rooted). The measurements were assessed with the Invivo professional software and then, subjected to correlation matrices and linear regression statistical analysis in order to find any significant correlations between crown and root measurements (α≤0.05). RESULTS: Seventy-three out of 247 good quality CBCTs were assessed. Correlation matrices statistical analysis showed linear correlations for some variables investigated, especially for CW/RW pairing in all subgroups (r=0.81, r=0.70 and r=0.58 respectively for single-, two- and three-rooted) and CL/RL in the single-rooted subgroup (r=0.29). Subsequent linear regression analysis allowed to obtain information about roots starting from crown measurements by means of equations [RW=0.76+(0.73×CW) and RL=10.94+(0.25×CL) for single-rooted teeth; RL=1.11+(0.73×CW) and RW=0.99+(0.76×CW), respectively for single- and two-rooted teeth]. No linear correlation was found between crown measurements and C-R angular values. CONCLUSION: It is possible to obtain root information starting from some crown measurements but these do not fulfil the need of minimal information to guarantee a perfect root position starting from that of crown.
Assuntos
Coroas , Coroa do Dente , Humanos , Estudos Retrospectivos , Coroa do Dente/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Dente SerotinoRESUMO
PURPOSE: The design of a maxillary anterior tooth crown is crucial to post-treatment aesthetic appearance. Currently, the design is performed manually or by semi-automatic methods, both of which are time-consuming. As such, automatic methods could improve efficiency, but existing automatic methods ignore the relationships among crowns and are primarily used for occlusal surface reconstruction. In this study, the authors propose a novel method for automatically reconstructing a three-dimensional model of the maxillary anterior tooth crown. METHOD: A pose estimation network (PEN) and a shape estimation network (SEN) are developed for jointly estimating the crown point cloud. PEN is a regression network used for estimating the crown pose, and SEN is based on an encoder-decoder architecture and used for estimating the initial crown point cloud. First, SEN adopts a transformer encoder to calculate the shape relationship among crowns to ensure that the shape of the reconstructed point cloud is precise. Second, the initial point cloud is subjected to pose transformation according to the estimated pose. Finally, the iterative method is used to form the crown mesh model based on the point cloud. RESULT: The proposed method is evaluated on a dataset with 600 cases. Both SEN and PEN are converged within 1000 epochs. The average deviation between the reconstructed point cloud and the ground truth of the point cloud is 0.22 mm. The average deviation between the reconstructed crown mesh model and the ground truth of the crown model is 0.13 mm. CONCLUSION: The results show that the proposed method can automatically and accurately reconstruct the three-dimensional model of the missing maxillary anterior tooth crown, which indicates the method has promising application prospects. Furthermore, the reconstruction time takes less than 11 s for one case, demonstrating improved work efficiency.
Assuntos
Imageamento Tridimensional , Dente , Humanos , Imageamento Tridimensional/métodos , Coroa do Dente/diagnóstico por imagem , Coroas , Maxila/diagnóstico por imagemRESUMO
OBJECTIVES: Chimpanzees (Pan troglodytes) possess a relatively generalized molar morphology allowing them to access a wide range of foods. Comparisons of crown and cusp morphology among the four subspecies have suggested relatively large intraspecific variability. Here, we compare molar crown traits and cusp wear of two geographically close populations of Western chimpanzees, P. t. verus, to provide further information on intraspecific dental variability. MATERIALS AND METHODS: Micro-CT reconstructions of high-resolution replicas of first and second molars of two Western chimpanzee populations from Ivory Coast (Taï National Park) and Liberia, respectively were used for this study. First, we analyzed projected tooth and cusp 2D areas as well as the occurrence of cusp six (C6) on lower molars. Second, we quantified the molar cusp wear three-dimensionally to infer how the individual cusps alter with advancing wear. RESULTS: Both populations are similar in their molar crown morphology, except for a higher appearance rate of a C6 in Taï chimpanzees. In Taï chimpanzees, lingual cusps of upper molars and buccal cusps of lower molars possess an advanced wear pattern compared to the remaining cusps, while in Liberian chimpanzees this wear gradient is less pronounced. DISCUSSION: The similar crown morphology between both populations fits with previous descriptions for Western chimpanzees and provides additional data on dental variation within this subspecies. The wear pattern of the Taï chimpanzees are in concordance with their observed tool rather than tooth use to open nuts/seeds, while the Liberian chimpanzees may have consumed hard food items crushed between their molars.
Assuntos
Hominidae , Dente , Animais , Pan troglodytes/anatomia & histologia , Coroa do Dente/diagnóstico por imagem , CoroasRESUMO
OBJECTIVE: Our aims were to assess the prevalence of hypodontia in unilateral hemifacial microsomia (HFM), and to compare tooth (crown) size between affected and unaffected sides. DESIGN: In a retrospective cross-sectional study of South Australians, computed tomography (CT) scans were used to assess hypodontia and crown size (mesiodistal length, buccolingual width and crown height). The inclusion criteria were the absence of other congenital anomalies and the availability of CT scans. The exclusion criteria were the lack of extraction history or reproducible landmarks for morphometric assessment. The final sample comprised 41 participants in both dentitions, including 32 children and 9 adults (median age 13.9 years, range 0.4 - 47.6 years; 19 males and 22 females). Hypodontia was assessed in all participants, and the permanent crown size in 30 (73.2%) participants. Linear mixed-effects models were performed to determine if crown size was significantly different between the two sides, controlling for sex, HFM severity, and tooth and jaw type. RESULTS: Hypodontia occurred in none of the participants in the primary dentition, but in 6/30 (20%) participants in the permanent dentition (3/30 each on the affected and unaffected sides). There was no significant difference in the mean crown dimensions between the two sides, but the crown size was larger in males (p < 0.05), except for mesiodistal length, and became progressively smaller with increased HFM severity (p < 0.05). CONCLUSIONS: Hypodontia spared the primary dentition but featured prominently in the permanent dentition. The permanent crown dimensions were unaltered between the two sides.
Assuntos
Anodontia , Síndrome de Goldenhar , Masculino , Criança , Adulto , Feminino , Humanos , Lactente , Pré-Escolar , Adolescente , Adulto Jovem , Pessoa de Meia-Idade , Anodontia/diagnóstico por imagem , Anodontia/epidemiologia , Estudos Retrospectivos , Estudos Transversais , Austrália , Coroa do Dente/diagnóstico por imagem , Odontometria , Coroas , TomografiaRESUMO
The aims of this study were to develop a new classification for pre-eruptive intracoronal resorption(PIR) with different resorption areas and sizes and to compare the new classification scores among observers from different specialities and professional experience. The PIR was evaluated according to the new classification by two dentomaxillofacial radiologists and two endodontists. Information regarding the patient's age, gender, systemic diseases, the number of PIR, the affected tooth area and the size of the PIR was recorded. The new classification system showed that PIR six and seven defects were the most detected. Regarding jaw regions, the highest reliability was seen in the maxillary central teeth between observers I and IV, and maxillary premolar-molar teeth between observers II and III. This study revealed that PIR can be found in both root and crown dentine. Professional experience and specialty and awareness of the PIR defect may affect the diagnosis.
Assuntos
Exantema , Reabsorção de Dente , Dente não Erupcionado , Humanos , Dentição Permanente , Reprodutibilidade dos Testes , Reabsorção de Dente/diagnóstico , Erupção Dentária , Coroa do Dente/diagnóstico por imagemRESUMO
Cone-beam computed tomography (CBCT) enables the assessment of regressive morphological changes in teeth, which can be used to predict chronological age (CA) in adults. As each tooth region is known to have different correlations with CA, this study aimed to segment and quantify the sectional volumes of the tooth crown and root from CBCT scans to test their correlations with the chronological age (CA). Seventy-five CBCT scans from individuals with age between 20 and 60 years were collected retrospectively from an existing database. A total of 192 intact maxillary anterior teeth fulfilled the eligibility criteria. The upper tooth volume ratio (UTVR), lower tooth volume ratio (LTVR), and sex were used as predictor variables. The UTVR and LTVR parameters were both found to be differently correlated to CA and independent from each other. Regression models were derived from each tooth, with the highest R2 being the maxillary lateral incisor (R2 = 0.67). Additional single predictor models using each ratio were capable of reliably predicting the CA. The segmentation approach in volumetric adult dental age estimation proved to be beneficial in enhancing the reliability of the regression model.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Coroa do Dente , Adulto , Tomografia Computadorizada de Feixe Cônico/métodos , Coroas , Humanos , Incisivo/diagnóstico por imagem , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Estudos Retrospectivos , Coroa do Dente/diagnóstico por imagem , Adulto JovemRESUMO
INTRODUCTION: This study aimed to evaluate the 3-dimensional tooth crown symmetry and the crown volumes of maxillary and mandibular teeth in patients with unilateral or bilateral missing or peg-shaped maxillary lateral incisors. METHODS: Six groups were established for the possible clinical variations in patients with unilateral missing or peg-shaped maxillary lateral incisors, bilateral presence of these tooth anomalies, and a control group (CG) with normal lateral incisors. The study was conducted on digital dental models of 132 patients. The morphologic symmetry of the antimere teeth was investigated using 3-dimensional deviation analysis. Volumes of contralateral teeth were compared within and among groups for the maxilla and mandible. Furthermore, volumes of teeth were compared in missing and peg-shaped quadrants and quadrants of CG. Intergroup differences were tested using one-way analysis of variance and Kruskal-Wallis tests, whereas paired t and Wilcoxon tests were used for parametric and nonparametric variables, respectively, for intragroup comparisons. RESULTS: Significant deviations in symmetry of antimere teeth were not detected (P >0.05). The volumes of mandibular central and lateral incisors in missing or peg-shaped lateral incisor groups were smaller than in the CG (P <0.05). Per quadrant analysis, volumes of the maxillary central incisor and mandibular central incisors, canines, and first molars in quadrants with missing or peg-shaped lateral incisors were smaller than in the control quadrants (P <0.05). CONCLUSIONS: Neither unilateral nor bilateral presence of missing or peg-shaped maxillary lateral incisors affected the morphologic symmetry of antimere teeth but did affect tooth volume, especially in the mandibular arch.
Assuntos
Incisivo , Maxila , Anormalidades Dentárias , Humanos , Imageamento Tridimensional , Incisivo/anormalidades , Incisivo/diagnóstico por imagem , Mandíbula/diagnóstico por imagem , Maxila/diagnóstico por imagem , Coroa do Dente/anatomia & histologia , Coroa do Dente/diagnóstico por imagemRESUMO
OBJECTIVE: To determine the discrepancy of crown-root morphology of anterior teeth, using cone-beam computed tomography (CBCT), and to provide a guidance for proper torque expression. METHODS: A total of eligible 200 CBCT were imported into Invivo v. 5.4 software, to obtain the middle labio-lingual sections of anterior teeth. AutoCAD 2007 software was applied to measure the crown-root angulation (Collum angle) and the angle formed by a tangent to the center of the labial surface and the long axis of the crown (labial surface angle). SPSS 18.0 was used for statistical comparisons of the two measurements, at the level of p< 0.05, and the Pearson correlation analysis was applied to investigate the association between the two measurements. RESULTS: The value of Collum angle in maxillary central incisor was close to 0°. Significantly negative Collum angle in lateral incisors and maxillary canine, and positive value in mandibular canine were detected (p < 0.001). The labial surface angle in canine was significantly greater than the intra-arch incisors (p< 0.001), and no significant difference was detected between the central and lateral incisors (p > 0.05). Notably, there was also a significant positive correlation between the two measurements. CONCLUSIONS: The crown-root angulations were greatly different among anterior teeth. Accompanying the obvious crown-root angulations, the canines both in maxillary and mandibular arches presented considerable labial surface curvatures. Hence, equivalent deviation during bracket bonding might cause greater torque expression error and increase the risk of alveolar fenestration and dehiscence.
Assuntos
Tomografia Computadorizada de Feixe Cônico , Coroa do Dente , Coroas , Incisivo/diagnóstico por imagem , Maxila/diagnóstico por imagem , Coroa do Dente/diagnóstico por imagemRESUMO
BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.