Analysis of dentin wear and biological properties promoted by experimental inoffice desensitizing materials.

BACKGROUND: This study aimed to evaluate dentin wear and biological performance of desensitizing materials. METHODS: Seventy bovine root dentin blocks were sectioned. Half of the surface of each specimen was untreated (control) and the other half was immersed in EDTA and treated with the following desensitizing materials: placebo varnish (PLA), fluoride varnish (FLU), sodium fluoride (NaF) varnish + sodium trimetaphosphate (TMP), universal adhesive (SBU), S-PRG varnish (SPRG), biosilicate (BIOS), and amelotin solution (AMTN). After application, the specimens were submitted to an erosive-abrasive challenge and the wear analyzed by optical profilometer. Serial dilutions of extracts obtained from the culture medium containing discs impregnated with those desensitizers were applied on fibroblasts and odontoblasts-like cells cultures. Cytotoxicity and production of total protein (TP) by colorimetric assays were determined after 24 h. Data were statistically analyzed using Kruskal-Wallis, Dunn's, One-way ANOVA and Tukey tests (p ≤ 0.05). RESULTS: No dentin wear was observed only for SBU. The lowest dentin wear was observed for AMTN and TMP. Cell viability was significantly reduced after treatment with undiluted extracts of PLA, FLU, TMP and SBU in fibroblasts and TMP and SBU in odontoblast-like cells. SPRG, BIOS and AMTN were cytocompatible at all dilutions tested. Considering TP results, no statistical difference was observed among the groups and high levels for TP were observed after TMP and FLU treatments. CONCLUSIONS: Universal adhesive system may protect dentin with opened tubules from wear after challenge. Extracts of adhesive and fluoride varnishes presented cytotoxic mainly on fibroblasts. The enamel protein may be a future alternative to treat dentin with opened tubules because it may cause low wear under erosive-abrasive challenge with low cytotoxic effects.

Occluding Efficiency of Different Desensitizing Agents and Er,Cr:YSGG Laser on Dentin Tubules.

PURPOSE: This study aimed to evaluate the effects of two desensitizers and the Er,Cr:YSGG laser on human dentin tubules, applied alone or in combination. METHODS: Ninety-six dentin specimens were obtained from extracted third molars and divided into six groups: Group 1: no-treatment (Control); Group 2: nano-hydroxyapatite desensitizer (NhapD); Group 3: NhapD+Er,Cr:YSGG laser (L); Group 4: Er,Cr:YSGG laser (L); Group 5: glutaraldehyde desensitizer (GD); and Group 6: GD+L, respectively. All specimens were evaluated using scanning electron microscopy. The diameter and the number of open dentin tubules, the tubules' occluding ratio, and the mineral coverage area were measured via the Image J software at 2000× magnification. Atomic force microscopy was used to determine the blocking mechanism of desensitizing treatments and the surface morphology of dentin specimens. One-way ANOVA and Tukey tests were used for statistical analysis. RESULTS: The number of open tubules and the mean diameter of tubules for all treatment groups showed statistically significant differences from the control group The NhapD+L group had a significantly lower number of open tubules than the L and GD groups. The NhapD+L and L groups significantly had higher occluding ratios than the other groups. CONCLUSIONS: The present study showed that the Er,Cr:YSGG laser alone was effective in terms of tubule occlusion and also contributed to increasing the occluding ratio of nano-hydroxyapatite. It may be recommended to use the Er,Cr:YSGG laser with nano-hydroxyapatite desensitizers to achieve effective tubule occlusion.

Dentine tubule occlusion effect of hydrolyzed casein in a bioactive glass-based dental desensitizing gel.

OBJECTIVES: The effectiveness of three different groups of polyethylene glycol (PEG)-based gels containing powders on dentin hypersensitivity (DH) treatment were assessed and compared with Actimins® as commercial reference group. METHODS: Hydroxyapatite nanorods (nHA) and sol-gel-derived 45S5 bioglass (SGD 45S5) powders were synthesized through hydrothermal and sol-gel methods, respectively. First, 25 demineralized dentin disks were divided into five groups. Then, the prepared gels based on 45S5 bioglass with and without hydrolyzed casein (HC) as experimental, nHA gel and Actimins® as positive and commercial reference groups were applied twice a day on disks by a micro applicator. To mimic the oral environment, treated disks were immersed in artificial saliva in a water bath at 37 °C for 7 days. However, in the negative control group, no agent was applied on the samples. FE-SEM, EDS, AFM, and XRD were performed to assess tubule occlusion. One-way ANOVA test was used for statistical analysis and p*<0.05 was set as the significance level. RESULTS: The nHA with an average aspect ratio of 2.77 and the SGD 45S5 powders with a polygonal morphology and the average size of 48.64±11.38 µm were synthesized. After treatment, tubule occlusion in HC-SGD 45S5 and nHA gels were shown to be higher than other groups. The root mean square roughness (Rrms) of the above-mentioned gels showed to be 121.54±9.25 nm, and 312.6 ± 9 nm, respectively. CONCLUSION: The nHA containing group exhibited the highest tubule occlusion efficiency (i.e., tubule diameter of 0.92±0.32 µm) with a superior mineral precipitation. HC as a novel material demonstrates to be potentially beneficial in DH treatment. CLINICAL SIGNIFICANCE: DH as a common issue may be reduced or eliminated by occlusion of patent dentinal tubules. There are various types of desensitizing agents capable of controlling the DH by the occlusion of patent dentinal tubules. The desensitizing gels developed in this study showed to be promising for clinical and home-use applications.

Three-dimensional visualization of dentine occlusion based on FIB-SEM tomography.

The occlusion of dentinal tubules has become a rapid and effective method for treating dentin hypersensitivity. Accurate evaluation of dentin occlusion is critical to illustrate the efficacy of oral care products and to optimize dental therapy in the clinics, which is limited by the conventional two-dimensional (2-D) characterization methods. Here, we demonstrate the visualization of the dentin occlusion via three-dimensional (3-D) characterization using a focused ion beam-scanning electron microscopy (FIB-SEM) tomography. Using the "Slice and View" approach, the material used for occluding dentin tubules is imaged with a very high-resolution voxel (10 nm × 10 nm × 20 nm) from 2-D SEM images and then reconstructed into a 3-D volume, which presents the mode of action of toothpaste for treating dentin hypersensitivity. Meanwhile, quantitative analysis of the depth of occlusion is successfully obtained. This work validates the feasibility of FIB-SEM tomography in the analysis of dentin occlusion within the complicated networks of dentine tubules at the nanoscale, and provides a novel approach to facilitate the research and development of oral care products.

Effectiveness and cytotoxicity of two desensitizing agents: a dentin permeability measurement and dentin barrier testing in vitro study.

BACKGROUND: When evaluating the efficacy and safety of various desensitizing products in vitro, their mechanism of action and clinical utility should be considered during test model selection. This study aimed to evaluate the effects of two desensitizers, an in-office use material and an at-home use material, on dentin specimen permeability, and their dentin barrier cytotoxicity with appropriate test models. METHODS: Two materials, GLUMA desensitizer (GLU) containing glutaraldehyde and remineralizing and desensitizing gel (RD) containing sodium fluoride and fumed silica, were selected. Human dentin specimens were divided into three groups (n = 6): in groups 1 and 2, GLU was applied, and in group 3, RD was applied and immersed in artificial saliva (AS) for 24 h. Dentin specimen permeability before and after each treatment/post-treatment was measured using a hydraulic device under a pressure of 20 cm H2O. The perfusion fluid was deionized water, except in group 2 where 2% bovine serum albumin (BSA) was used. The representative specimens before and after treatment from each group were investigated using scanning electron microscopy. To measure cytotoxicity, test materials were applied to the occlusal surfaces of human dentin disks under which three-dimensional cell scaffolds were placed. After 24-h contact within the test device, cell viability was measured via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays. RESULTS: GLU significantly reduced the dentin permeability and occluded the dentinal tubules when 2% BSA was used as perfusion fluid. RD significantly reduced dentin permeability and occluded the tubules, but permeability rebounded after AS immersion. GLU significantly decreased cell viability, but RD was non-cytotoxic. CONCLUSIONS: In vitro GLU application induced effective dentinal tubule occlusion only following the introduction of simulated dentinal fluid. RD provided effective tubule occlusion, but its full remineralization potential was not realized after a short period of immersion in AS. GLU may harm the pulp, whereas RD is sufficiently biocompatible.

Assessment of the Ability of Desensitizing and Conventional Mouth Rinses to Promote Dentin Tubule Occlusion.

This study aimed to evaluate the effect of desensitizing and conventional mouth rinses on dentin tubule occlusion. Dentin hypersensitivity was simulated by EDTA application for five minutes. The specimens were randomly allocated into the following groups: desensitizing mouth rinses (Colgate Sensitive, Elmex Sensitive Professional, Listerine Advanced Defense Sensitive, Sensodyne Cool Mint); conventional mouth rinses (Colgate Plax, Elmex Caries Protection, Listerine Anticaries, Sensodyne Pronamel); a negative control (C-: distilled water); and Clinpro XT Varnish was the positive control (C+). Subsequently, the specimens were submitted to an erosive or abrasive challenge (performed separately) and to an erosive/abrasive cycling for five days (n=10 for each challenge). After treatment, challenges, and cycling, the specimens were analyzed in an environmental scanning electron microscope to verify the number of open dentin tubules (ODTs), counted by using Image J software (National Institutes of Health, Bethesda, MD, USA). Data were analyzed by the Kruskal-Wallis, Friedman and Dunn tests, with Bonferroni correction (α=0.05). Groups did not differ at baseline (p>0.05). At the post-treatment, erosion and abrasion stages, C+ was the only group that showed a reduction in ODTs compared to C-(p<0.05). In the other groups, numbers did not differ significantly from C- (p>0.05). After cycling, none of the groups exhibited significant reduction in ODTs other than C- (p>0.05); however, C+, Listerine Anticaries, and Colgate Plax had a lower number of ODTs than Listerine Sensitive and Sensodyne Pronamel. No mouth rinse was able to promote significant occlusion of the dentin tubules after treatment and the challenges. C+ was the only product that effectively promoted tubular occlusion, but this effect did not withstand several erosive and abrasive challenges.

Occlusion effects of bioactive glass and hydroxyapatite on dentinal tubules: a systematic review.

OBJECTIVE: Bioactive glass and hydroxyapatite are biocompatible materials used as an adjunct to various dental materials. The present study aimed to evaluate the occlusion effects of bioactive glasses and hydroxyapatite on dental tubules. MATERIALS AND METHODS: We searched the PubMed/Medline, Embase, and Web of Science databases for the relevant records. The methodological quality of the studies was assessed by an accepted quality assessment tool. RESULTS: From the electronic databases, 372 articles were retrieved. After evaluating the records, 35 in vitro studies were included. The studies revealed a low risk of bias. The primary outcomes from bioactive glass studies demonstrated the potential efficacy of both bioactive glass and hydroxyapatite in dentin tubule occlusion compared to the control. CONCLUSION: The current systematic review showed that bioactive glass and hydroxyapatite could effectively occlude the dentinal tubules. Thus, desensitizing agents containing bioactive glass and hydroxyapatite can be used to manage dentin hypersensitivity (DH). However, long-term follow-up clinical trials are required in the future before definitive recommendations can be made. CLINICAL RELEVANCE: This work achieved a satisfactorily systematic review for assessing desensitizing agents containing bioactive glass and hydroxyapatite in dentine hypersensitivity treatments recommended for clinical practice and research.

Experimental pastes containing niobophosphate and 45S5 bioactive glasses for treatment of dentin hypersensitivity: dentin permeability and tubule obliteration.

OBJECTIVES: This study tested the ability of bioactive pastes containing niobophosphate and 45S5 glasses to reduce dentin permeability and to obliterate dentinal tubules, as a mean of reducing human dentin hypersensitivity. MATERIALS AND METHODS: Experimental pastes with concentrations of 10, 20, and 30 wt% of two bioactive glasses (45S5 or niobophosphate [NbG]) were formulated. A paste without bioactive glass (placebo) and a commercial paste (Nano P, FGM) were used as controls. Forty dentin disc specimens were obtained from caries-free extracted third human molars and divided in 8 groups (n = 5). Percentage of permeability (%Lp) was assessed in a dental permeability machine considering hydraulic conductance, immediately after pastes application and at day 7, day 14, and day 21. The precipitates formed on the surface of the dentin discs (and dentinal tubules) were analyzed by SEM/EDS and micro-Raman spectra. Data of dentin permeability (%) 2-way repeated-measures (ANOVA) and Holm-Sidak post-tests (α = 0.05). Dentinal tubule obliteration was visually (and elemental) evaluated and descriptively reported. RESULTS: The experimental bioactive glass pastes containing NbG and 45S5, regardless of the concentration, reduced dentin permeability in comparison with pastes without bioactive glasses (P < 0.05). The formulated placebo and commercial paste did not reduce permeability over time (P < 0.05). SEM/EDS and micro-Raman analyses showed that both type of bioactive pastes (NbG or 45S5-based) presented mineral precipitates obliterating the dentinal tubules at day 21. NbG seems to offer a better initial effect than 45S5, while at 21 days there is no difference between both glasses. CONCLUSION: Experimental bioactive pastes containing NbG and 45S5 (at concentrations of 10%, 20%, or 30%) have potential to reduce dentin permeability (over time) in comparison with pastes without bioactive glasses; and this occurs on behalf of obliteration of dentinal tubules by microparticle and precipitate formation. CLINICAL RELEVANCE: Bioactive pastes containing NbG and 45S5 may benefit patients presenting dentin hypersensitivity, because these pastes can start acting fast after application and maintain their action up to 21 days.

Evaluation of Dentin Tubule Plugging Efficiencies and Effects on Dentin Surface Roughness of Dentin Desensitizing Agents, the Er,Cr:YSGG Laser, and Their Combination After Erosion-abrasion Cycles: An In Vitro Study.

OBJECTIVES: The purposes of this in vitro study were to evaluate the tubule plugging efficiencies and effects on the surface roughness of dentin of different dentin desensitizing agents (DDAs; Teethmate Desensitizer, Kuraray; Gluma Desensitizer, Kulzer; Clinpro White Varnish, 3M ESPE; Enamelast, Ultradent) and the Er,Cr:YSGG laser (Biolase, Waterlase), both alone and in combination with DDAs, after application and after an erosion-abrasion cycle. METHODS AND MATERIALS: For surface roughness examinations, superficial buccal dentin specimens were divided into 10 groups: the control, Teethmate Desensitizer, Gluma Desensitizer, Enamelast, Clipro White Varnish, Er,Cr:YSGG Laser, Teethmate Desensitizer-Laser, Gluma Desensitizer-Laser, and Enamelast-Laser, and Clinpro White Varnish-Laser groups. Profilometric analyses and scanning electron microscopy (SEM) examinations were performed after applications and after a 5-day erosive-abrasive cycle. For the statistical analysis of surface roughness measurements, 2-way analysis of variance (ANOVA), 1-way ANOVA, and Tukey post hoc test were used. RESULTS: Among the treatments, only DDAs alone did not cause increase in surface roughness after application. All of the laser applications increased the surface roughness of dentin, and after the erosion-abrasion cycle, all of the test groups had increased surface roughness. However, SEM images showed that morphological changes were less frequently observed in all of the experimental groups than in the control group. In addition, all of the laser-DDA combinations had stronger tubule occlusion effects than did DDAs alone, even after erosion-abrasion. CONCLUSIONS: All of the test treatments showed protective effects on dentin surfaces against the negative effects of erosion-abrasion. The addition of the laser to DDA applications increased tubular plugging efficiencies of DDAs, and the tubule plugs of the combination treatments were resistant to the erosion-abrasion cycle.

Effect of bioactive glasses containing strontium and potassium on dentin permeability.

Dentin hypersensitivity (DH) is characterized by pain caused by an external stimulus on exposed dentin. Different therapeutic approaches have been proposed to mitigate this problem; however, none of them provide permanent pain relief. In this study, we synthesized and characterized experimental bioactive glasses containing 3.07 mol% SrO or 3.36 mol% K2 O (both equivalent to 5 wt% in the glass), and evaluated their effect on dentin permeability to verify their potential to treat DH. The experimental materials were characterized by field-emission scanning electron microscopy, Fourier transform infrared spectroscopy, micro-Raman spectroscopy, and X-ray diffraction to confirm the respective structures and chemical compositions. The reduction in the hydraulic conductance of dentin was evaluated at the three stages: minimum permeability; maximum permeability (24% ethylenediaminetetraacetic acid [EDTA] treatment); and final dentin permeability after treatment with the bioactive glasses. They all promoted a reduction in dentin permeability, with a significant difference for each sample and posttreatment group. Also, a significant reduction in dentin permeability was observed even after a simulated toothbrushing test, demonstrating effective action of these materials against DH. Besides, incorporating 3.07 mol% SrO was a positive factor. Therefore, strontium's desensitizing and re-mineralizing properties can be further exploited in bioactive glasses to promote a synergistic effect to treat DH.

In Vitro Biocompatibility of CPP-ACP and Fluoride-containing Desensitizers on Human Gingival Cells.

OBJECTIVES: To analyze the biocompatibility of different desensitizers containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride in their composition: MI Varnish (MV), Clinpro White Varnish (3M Oral Care), Profluorid Varnish (VOCO), Duraphat (Colgate) and Embrace Varnish (Pulpdent) on human gingival fibroblast cells (hGF). METHODS AND MATERIALS: Human gingival fibroblast (hGF) cells were exposed to several desensitizer extracts at different concentrations (0.1%, 1%, and 4% eluates). Then, in vitro biocompatibility was studied by analyzing the IC50 value, cell proliferation (MTT assay and cell cycle), cell migration (wound healing assay), cell morphology and F-actin content (immunocytofluorescence), and induction of apoptosis/necrosis (flow cytometry). Data were analyzed by one-way analysis of variance (ANOVA) followed by Tukey test. RESULTS: The lowest cell viability and IC50 were observed in all concentrations of Embrace Varnish-treated hGFs (p<0.001), whereas the highest were exhibited by those treated with Clinpro White Varnish. Similar effects were evidenced when induction of apoptosis/necrosis and cell migration assays were assessed. Finally, MI Varnish, Profluorid Varnish, Duraphat, and Embrace Varnish extracts showed lower numbers of attached cells, some of them with an unusual fibroblastic morphology when cultured with 4% concentration of the varnishes, while Clinpro White Varnish exhibited a similar number of cells with an evident actin cytoskeleton compared to the control group. CONCLUSIONS: The results obtained in this study indicate that hGFs show better in vitro biocompatibility after exposure to Clinpro White Varnish, even at the highest concentration employed, making it the most eligible for topical applications. In contrast, Embrace Varnish exhibited a high cytotoxicity towards hGFs that could potentially delay the healing process and regeneration of the oral mucosa, although more studies are needed to confirm this hypothesis.

Obliterating potential of active products for dentin hypersensitivity treatment under an erosive challenge.

OBJECTIVES: To compare the effect of 5 desensitizing agents on the hydraulic conductance (Lp) of dentin and to analyze its surface under a Laser Scanning Confocal Microscope (LSCM) before and after an erosive challenge. METHODS: Lp was analyzed in the following sequence: in the presence of smear layer (pMin), after a 15-second acid etching (pMax), after treatment with a desensitizing agent (pTreat) and after a 1-minute erosive challenge (6% citric acid - pEro). Fifty 1.0 ± 0.2 mm-thick dentin disks were prepared from sound human third molars and were randomly distributed into 5 groups (n = 10): FG-Fluoride gel (control), SA-Sensiactive, PR-Sensitive Pro-Relief, NP-Desensibilize Nano-P and EV-Enamel Pro Varnish. Data were analyzed by two-way ANOVA and Tukey tests (α<0.05). Additional specimens were analyzed under a Laser Scanning Confocal Microscope (LSCM) and by Energy Dispersive X-ray Spectroscopy (EDS). RESULTS: All materials reduced the Lp in some extent, except for FG and EV. After the erosive challenge, SA was the only material effectively able to keep the same Lp of the post-treatment phase, while the other products showed lower resistance upon an erosive challenge. Under the LSCM, the SA and NP materials were more effective to obliterate the opened dentin tubules and demonstrated higher resistance upon an erosive challenge. The EDS analysis evidenced levels of Ca, O, P, Si, Na and S. CONCLUSIONS: Product containing potassium oxalate was the most effective in reducing Lp of dentin samples before and after an erosive challenge. Under a LSCM, products containing potassium oxalate or hydroxyapatite crystals seemed to be occluding the dentin tubules after an erosive challenge.

Avian Eggshell Slurry as a Dentin Desensitizing Agent:An In Vitro Assessment Using Two Techniques.

AIM: This study aims to evaluate the efficacy of avian eggshell slurry as a desensitizing agent compared to casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) containing Tooth Mousse. MATERIALS AND METHODS: Eggshell powder was prepared and characterized using a scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). Forty dentin disks were immersed in 6% citric acid for 2 min to simulate hypersensitive dentin (baseline). Disks were then divided into two groups (n = 20) according to treatment received: eggshell slurry and commercially available Tooth Mousse desensitizing agent. Each group was further divided into two subgroups (n = 10). In subgroup 1, dentin discs were immersed in artificial saliva for four weeks whereas, in subgroup 2, discs underwent acid challenge. Environmental scanning electron microscope (ESEM) analysis and hydraulic conductance test were utilized to calculate dentinal tubules occlusion and reduction of dentin permeability percentages, respectively. Statistical analysis was performed using SPSS 22.0 at a significance level p ≤ 0.05. RESULTS: After application of desensitizing agents, the eggshell slurry group showed a significantly higher percentage of dentinal tubules occlusion compared to the Tooth Mousse group, whereas no significant difference existed in the percentage reduction of dentin permeability between both groups. After both immersion protocols, the eggshell slurry significantly occluded more dentinal tubules compared to Tooth Mousse. On the contrary, results of percentage reduction of dentin permeability revealed no significant difference between both subgroups after acid challenge. After artificial saliva immersion, Tooth Mousse showed a significantly higher percentage reduction of dentin permeability compared to the eggshell slurry. CONCLUSION: Avian eggshell slurry can effectively occlude open dentinal tubules compared to commercially available Tooth Mousse desensitizing agent. CLINICAL SIGNIFICANCE: Avian eggshell slurry can be considered a promising material for the treatment of dentin hypersensitivity. How to cite this article: El Tahlawy AA, Saba DA, Bakir NG. Avian Eggshell Slurry as a Dentin Desensitizing Agent: An In Vitro Assessment Using Two Techniques. J Contemp Dent Pract 2021;22(5):532-537.

Analysis of permeability and biological properties of dentin treated with experimental bioactive glasses.

OBJECTIVES: To evaluate obliterating capability and biological performance of desensitizing agents. METHODS: 50 dentin blocks were distributed according to the desensitizing agent used (n = 10): Control (Artificial saliva); Ultra EZ (Ultradent); Desensibilize Nano P (FGM); T5-OH Bioactive Glass (Experimental solution); F18 Bioactive Glass (Experimental solution). Desensitizing treatments were performed for 15 days. In addition, specimens were subjected to acid challenge to simulate oral environment demineralizing conditions. Samples were subjected to permeability analysis before and after desensitizing procedures and acid challenge. Cytotoxicity analysis was performed by using Alamar Blue assay and complemented by total protein quantification by Pierce Bicinchoninic Acid assay at 15 min, 24-h and 48-h time points. Scanning electron microscopy and energy dispersion X-ray spectroscopy were performed for qualitative analysis. Data of dentin permeability was analyzed by two-way repeated measures ANOVA and Tukey's test. For cytotoxicity, Kruskal-Wallis and Newman-Keuls tests. RESULTS: for dentin permeability there was no significant difference among desensitizing agents after treatment, but control group presented highest values (0.131 ± 0.076 Lp). After acid challenge, control group maintained highest values (0.044 ± 0.014 Lp) with significant difference to other groups, except for Desensibilize Nano P (0.037 ± 0.019 Lp). For cytotoxicity, there were no significant differences among groups. CONCLUSION: Bioglass-based desensitizers caused similar effects to commercially available products, regarding permeability and dentin biological properties. CLINICAL SIGNIFICANCE: There is no gold standard protocol for dentin sensitivity. The study of novel desensitizing agents that can obliterate dentinal tubules in a faster-acting and long-lasting way may help meet this clinical need.

Comparing the Effectiveness of Different Dentinal Desensitizing Agents: In Vitro Study.

OBJECTIVES: To evaluate the in vitro effectiveness of desensitizing agents in reducing dentine permeability. METHODS: The efficacy of desensitizing agents in reducing dentine permeability by occluding dentine tubules was evaluated using a fluid filtration device that conducts at 100 cmH2O (1.4 psi) pressure, and SEM/EDX analyses were evaluated and compared. Forty-two dentine discs (n = 42) of 1 ± 0.2 mm width were obtained from caries-free permanent human molars. Thirty dentine discs (n = 30) were randomly divided into 3 groups (n = 10): Group 1: 2.7% wt. monopotassium-monohydrogen oxalate (Mp-Mh oxalate), Group 2: RMGI XT VAR, and Group 3: LIQ SiO2. Dentine permeability was measured following treatment application after 10 minutes, storage in artificial saliva after 10 minutes and 7 days, and citric acid challenge for 3 minutes. Data were analysed with a repeated measures ANOVA test. Dentine discs (n = 12) were used for SEM/EDX analyses to acquire data on morphological changes on dentine surface and its mineral content after different stages of treatment. RESULTS: Desensitizing agents' application on the demineralized dentine discs exhibited significant reduction of permeability compared to its maximum acid permeability values. Mp-Mh oxalate showed a significant reduction in dentine permeability (p < 0.05) when compared to RMGI XT VAR and LIQ SiO2. On SEM/EDX analysis, all the agents formed mineral precipitates that occluded the dentine tubules. CONCLUSIONS: 2.7% wt. monopotassium-monohydrogen oxalate was significantly effective in reducing dentine permeability compared to RMGI XT VAR and LIQ SiO2.

Effect Of Calcium Silicate, Sodium Phosphate, and Fluoride on Dentinal Tubule Occlusion and Permeability in Comparison to Desensitizing Toothpaste: An In Vitro Study.

This study compared the ability of a calcium silicate-, sodium phosphate-, and fluoride-based (CSSPF) toothpaste (TP) in promoting dentinal tubule occlusion and reducing dentin permeability with that of other commercially available antisensitivity TPs. Seventy-eight dentin discs (1.0±0.1 mm thick) were prepared from the midcoronal area and were treated with 37% phosphoric acid for 2 minutes; then they were randomly divided into six groups according to treatments: No treatment [positive control (PC)], entirely covered with nail varnish [negative control (NC)], hydroxyapatite (HAP)-containing TP [Desensin Repair (DES)], NovaMin-based [Sensodyne Repair & Protect (SEN)], CSSPF-based TP [Regenerate Advanced (REG)], sodium monofluorophosphate, potassium citrate, zinc citrate TP [Signal Sensitive Expert (SIG)]. Dentin permeability was tested by the dye percolation method (DP%). Scanning electron microscope (SEM) micromorphological and energy dispersive X-ray elemental analysis (EDX) of the dentin surfaces were done following each treatment. Results were analyzed using one-way analysis of variance (ANOVA) followed by Tukey post hoc test at a 95% confidence level (α=0.05). All the tested groups showed higher DP% than NC and lower percolation than the PC (p<0.05). REG and SIG were statistically comparable, and showed significantly lower DP% (p<0.05) than SEN and DES. None of the TPs tested was able to obliterate the lumen of the dentinal tubules (DT) completely. REG exhibited the highest weight percentage of calcium deposition, followed by SEN. Compared to the tested desensitizing TPs, CSSPF-based TPs demonstrated equal or less dentin permeability and better DT occlusion.

Bioactive glass versus Arginine dentifrices on the reduction of dentin permeability and acid tolerance.

OBJECTIVES: To compare the efficacy of calcium sodium phosphosilicate (CSPS) and arginine dentifrices on dentin permeability and acid tolerance. MATERIAL AND METHODS: Sixty dentin discs were randomly assigned into 3 groups, then brushed for 1 min with CSPS, arginine, or fluoride (control) dentifrices. To test acid tolerance, each disc was soaked in 6% citric acid for 1 min. Dentin permeability was measured before, following brushing, and acid challenge. Ten discs per group were similarly treated and evaluated for tubule occlusion following a single dentifrice application, while other five discs per group were employed in an acid tolerance assay. RESULTS: The percentage reduction in dentin permeability was 39.26%, 32.27%, and 21.71% in the arginine, CSPS, and control groups, respectively. The differences in dentin permeability reduction between the arginine and CSPS groups following brushing and acid challenge were not significant (p = 0.398 and p = 0.211, respectively). The arginine dentifrice demonstrated a significant reduction in permeability compared with the control (p = 0.011). In addition, the occlusion exhibited by the arginine and CSPS dentifrices was more resistant to acid challenge compared with that of the control (p < 0.001). From SEM analysis, dentinal tubule occlusion was observed after a single application in all groups. Some open dentinal tubules were detected in the test groups, while almost all of the orifices were open in the fluoride group following acid challenge. CONCLUSIONS: There is no significant difference between arginine and CSPS dentifrices in reducing dentin permeability following a single application and acid challenge. Following acid challenge, the reduced permeability generated by arginine and CSPS was more stable compared with the fluoride dentifrice.

The evaluation of the desensitization effect of a desensitizing agent and desensitizing toothpastes in vitro.

This study was evaluating how three desensitizing toothpastes used at home influence the effect associated with desensitizing agents after application in the clinic. Fifty dentine disks measure it permeability and 32 dentine disks with similar permeability levels were selected. Following Dental desensitizer treatment, dentine disks were randomly divided into three subgroups (n=10) that received applications of three toothpastes, respectively. The permeability (Lp) of each specimen was measured after each treatment. One specimen was selected from each group for scanning electron microscopy (SEM) observation. After each treatment, the Lp values decreased significantly for each group (p<0.05) and either completely or partially blocked the dentine tubules upon SEM observation. However, no significant differences in Lp values were observed amongst subgroups (p>0.05). After using the Dental desensitizer, Sensodyne, Crest and Colgate desensitizing toothpastes both can continued to reduce the permeability of the dentine disk, and no significant differences were found amongst them.

Dentin tubule obturation of a bioglass-based dentin desensitizer under repeated exposure to lactid acid and brushing.

BACKGROUND: Dentin hypersensitivity is a frequent finding especially in periodontitis patients. Conventional treatment aims for obstruction of dentin tubules by disabling liquid and osmotic fluctuation to and from the pulpal chamber. A novel bioglass-based desensitizer was shown to obstruct tubules and to resist periodic exposure to lactic acid. Whether this obstruction is resistant to brushing had not been tested so far. Accordingly, the present study aimed to assess dentin tubule obstruction after repeated acid exposure and brushing. METHODS: Sixty dentin discs were cleaned with 17% EDTA, mounted into a pulp fluid simulator and randomly divided into 3 groups: No surface treatment in Group A, Seal&Protect® in group B and DentinoCer in group C. Discs were exposed to 0.1 M non-saturated lactic acid thrice and standardized brushing twice a day for 12 days. At baseline and after 2, 4 and 12 d samples were removed from the setting and prepared for top-view SEM analysis to assess tubule obstruction using the Olley score. Discs were then vertically cut and the section surface morphologically assessed using backscatter imaging. For both vertical and sectional surfaces EDX analysis was used to characterize the surface composition in the tubular and inter-tubular area. RESULTS: Group A showed clean tubular lumina at all time points. From day 2 onwards dentin showed exposed collagen fibers. Group 2 initially showed a complete surface coverage that flattened out during treatment without ever exposing tubules. At baseline, samples of Group C displayed a complete homogeneous coverage. From day 2 on tubules entrances with obstructed lumen became visible. While on day 4 and 12 the dentin surface exposed collagen fibers the lumina remained closed. EDX analysis of the vertical and horizontal views showed that P and Ca were predominant elements in both the inter- and tubular dentin while Si peaks were found in the tubule plugs. CONCLUSION: While group B displayed a packed layer on the surface during the whole investigation time group C samples lost their superficial layer within 48 h. Tubule plugs containing considerable Si proportions indicated previous presence of DentinoCer, while high Ca and P proportions suggest obturation by dentin-like material.

Influence of desensitizing and anti-erosive toothpastes on dentine permeability: An in vitro study.

OBJECTIVE: This study analyzed the effect of desensitizing and/or anti-erosive toothpastes on dentine permeability. METHODS: One-mm dentin discs were prepared from human molars and exposed to EDTA solution (5 min, 17%). Initial dentine permeability was measured, under constant pressure. Specimens were randomly allocated into 10 groups: four anti-erosive toothpastes (calcium silicate + sodium phosphate, potassium nitrate, stannous chloride + chitosan, oligopeptide-104); four desensitizing toothpastes (arginine + calcium carbonate, calcium sodium phosphosilicate, strontium acetate, stannous fluoride); and two controls (regular fluoridated toothpaste, and human saliva). They were submitted to a 5-day erosion-abrasion cycling model. Erosion consisted of immersion in citric acid (2 min, 0.3%, natural pH ˜ 2.6, 4x/day), followed by 1 h exposure to human saliva. Specimens were brushed for 15 s (2 N, 45 strokes) with the toothpaste slurries (total exposure time of 2 min). After 5 cycles, the final dentine permeability was determined. Dentine permeability change was calculated as a percentage of the initial hydraulic conductance (%Lp). Data were analyzed with one-way ANOVA and Tukey tests (α=0.05). RESULTS: The toothpastes calcium silicate + sodium phosphate and potassium nitrate, showed significant decrease in %Lp, with no difference between them. The regular fluoridated toothpaste also decreased the %Lp, not differing from potassium nitrate. No desensitizing toothpaste showed change in %Lp. Human saliva, oligopeptide-104 and stannous chloride + chitosan presented significant increase in %Lp, without difference between them. CONCLUSION: Calcium silicate + sodium phosphate, potassium nitrate, and the regular fluoridated toothpaste decreased dentine permeability, whereas the desensitizing toothpastes tested did not. CLINICAL RELEVANCE: Toothpastes had distinct impacts on dentine permeability, which may reflect a variable effect on the treatment of dentine hypersensitivity. Within the limitations of a laboratory-based study, toothpastes with an anti-erosive claim could also be effective in reducing the pain in dentine hypersensitivity.