Biofabrication of aminated nanocellulose reinforced polyvinyl alcohol/chitosan nanofibrous scaffold for sustained release of diltiazem hydrochloride.

In the modern environment conscious era, there has been a huge demand for the effective green method to fabricate biomaterials for sustained transdermal release of diltiazem hydrochloride to treat hypertension and cardiac failure. In this vein, the present study explores the amination of waste jute sourced nanocellulose (ANC) and its effect as a reinforcing filler to design electrospun polyvinyl alcohol (PVA)/chitosan based polymeric nanofibrous scaffold for drug delivery. The characterization results of FTIR (Fourier Transform Infrared Spectroscopy) confirm the successful chemical modification of nanocellulose (NCC). SEM (Scanning Electron Microscopy) results indicate the morphological modifications in ANC due to grafting. ANC enhances the mechanical properties of scaffold and sustains the release of the loaded drug to 67.89±3.39% as compared to the pure PVA/chitosan scaffold of 92.63±4.63% over a period of 72 h as shown by the results of in-vitro drug release study. Moreover, the incorporation of 0.5 % ANC improves the anti-bacterial activity against both gram-positive (97.4±4.87%, reduction in viable cells count) and gram-negative bacteria (98.5±4.93%, reduction in viable cells count). Further, the skin irritation and MTT assay authenticate the biocompatibility of the developed scaffold. The overall findings hence prove the efficacy of the engineered scaffold as a potential transdermal patch for sustained drug delivery applications.

Analytical QbD for the optimization of a multimode HPLC method for the investigation of hydrochlorothiazide, diltiazem and propranolol release from 3D printed formulation.

Since 3D printing technology is an emerging field in pharmaceutical technology, the present study aimed at the development of a mixed-mode liquid chromatographic method for the separation and determination of hydrochlorothiazide, diltiazem, and propranolol to investigate their in-vitro release performance from 3D printed tablets. Due to the unique properties of the mixed-mode stationary phase, the three drugs were separated in less than 8 min under isocratic elution. Method development was accomplished following the Analytical Quality by Design principles and was evaluated using risk assessment and multivariate analysis. The influences of critical method parameters on critical method attributes (were screened using a 2-level fractional factorial design and subsequently optimized through a central composite design. The method operable design region was approved by the establishment of a robust zone using Monte Carlo simulation and capability analysis. The validation of the HPLC method was performed based on the total error concept. The relative bias was varied between ─ 11.6 % and 10.5 % and the RSD values for repeatability and intermediate precision were below 4.4 % in all cases. The limits of detection (LOD) ranged between 0.17 - 0.90 µg/mL and were adequate for the specific application. The developed method was successfully applied to the analysis of the studied drugs in in-vitro drug release samples obtained from 3D-printed tablets combining the above-mentioned active pharmaceutical ingredients (APIs).

Utility of native emission quenching of erythrosine B for the determination of diltiazem in different dosage forms.

This study introduces a practical and cost-effective method for tracking diltiazem (DLZ) analytically. It utilizes a fluorimetric approach that relies on the modulation of fluorescence intensity of a dye called erythrosine B. Through a one-pot experiment performed in an acidic environment, a complex is rapidly formed between DLZ and erythrosine B. By observing the decrease in erythrosine B emission, a linear calibration plot is established, enabling the detection and quantification of DLZ concentrations ranging from 40 to 850 ng/ml. The estimated limits of detection and quantitation were 10.5 and 32.1 ng/ml, respectively. The variables affecting the DLZ-dye complex system were carefully adjusted. The validity of the approach was confirmed through a thorough evaluation based on the criteria set by ICH guidelines. The accuracy and precision of the methodology were evaluated, and the standard deviation and relative standard deviation were below 2. The strategy was successfully employed to analyze DLZ in tablets and capsules, and no significant variation between the proposed and reported methods as the values of the estimated t-test and F-test at five determinations were below 2.306 and 6.338, respectively. Notably, the method adheres to the principle of green chemistry by utilizing distilled water as the dispersing medium.

Exploring the Effectiveness of Carboxymethylated and Crosslinked Albizia procera Gum in Diltiazem Hydrochloride Matrix Tablets: A Comparative Analysis.

This study investigates the efficacy of modified Albizia procera gum as a release-retardant polymer in Diltiazem hydrochloride (DIL) matrix tablets. Carboxymethylated Albizia procera gum (CAP) and ionically crosslinked carboxymethylated Albizia procera gum (Ca-CAP) were utilized, with Ca-CAP synthesized via crosslinking CAP with calcium ions (Ca2+) using calcium chloride (CaCl2). Fourier Transform (FT) IR analysis affirmed polymer compatibility, while differential scanning calorimetry (DSC) and X-ray diffraction (XRD) assessed thermal behavior and crystallinity, respectively. Zeta potential analysis explored surface charge and electrostatic interactions, while rheology examined flow and viscoelastic properties. Swelling and erosion kinetics provided insights into water penetration and stability. CAP's carboxymethyl groups (-CH2-COO-) heightened divalent cation reactivity, and crosslinking with CaCl2 produced Ca-CAP through -CH2-COO- and Ca2+ interactions. Structural similarities between the polymers were revealed by FTIR, with slight differences. DSC indicated modified thermal behavior in Ca-CAP, while Zeta potential analysis showcased negative charges, with Ca-CAP exhibiting lower negativity. XRD highlighted increased crystallinity in Ca-CAP due to calcium crosslinking. Minimal impact on RBC properties was observed with both polymers compared to the positive control as water for injection (WFI). Ca-CAP exhibited improved viscosity, strength, controlled swelling, and erosion, allowing prolonged drug release compared to CAP. Stability studies confirmed consistent six-month drug release, emphasizing Ca-CAP's potential as a stable, sustained drug delivery system over CAP. Robustness and accelerated stability tests supported these findings, underscoring the promise of Ca-CAP in controlled drug release applications.

Enthalpy-Entropy Compensation in the Structure-Dependent Effect of Nonsteroidal Anti-inflammatory Drugs on the Aqueous Solubility of Diltiazem.

Certain combinations of acidic and basic drugs can cause significant changes in physicochemical properties through the formation of ionic liquids, eutectic mixtures, or deep eutectic solvents. In particular, combining indomethacin and lidocaine is known to result in apparent increases in both the partition coefficients (hydrophobicity) and aqueous solubilities (hydrophilicity). The physicochemical interactions between drugs change the water solubility of the drugs and affect the bio-availability of active pharmaceutical ingredients. Therefore, we need to clarify the mechanism of changes of water solubility of drugs through the physicochemical interactions. In the present study, we identified a thermodynamic factor that regulates the dissolution of a basic drug, in the presence of various acidic nonsteroidal anti-inflammatory drugs. The results demonstrated that enthalpy-entropy compensation plays a key role in the dissolution of drug mixtures and that relevant thermodynamic conditions should be considered.

Redefining the role of Ca2+-permeable channels in photoreceptor degeneration using diltiazem.

Hereditary degeneration of photoreceptors has been linked to over-activation of Ca2+-permeable channels, excessive Ca2+-influx, and downstream activation of Ca2+-dependent calpain-type proteases. Unfortunately, after more than 20 years of pertinent research, unequivocal evidence proving significant and reproducible photoreceptor protection with Ca2+-channel blockers is still lacking. Here, we show that both D- and L-cis enantiomers of the anti-hypertensive drug diltiazem were very effective at blocking photoreceptor Ca2+-influx, most probably by blocking the pore of Ca2+-permeable channels. Yet, unexpectedly, this block neither reduced the activity of calpain-type proteases, nor did it result in photoreceptor protection. Remarkably, application of the L-cis enantiomer of diltiazem even led to a strong increase in photoreceptor cell death. These findings shed doubt on the previously proposed links between Ca2+ and retinal degeneration and are highly relevant for future therapy development as they may serve to refocus research efforts towards alternative, Ca2+-independent degenerative mechanisms.

Modulation of Drug Release from Natural Polymer Matrices by Response Surface Methodology: in vitro and in vivo Evaluation.

PURPOSE: The present work aimed at challenging the efficacy of natural gums, karaya and locust bean gum, as matrix-forming polymers for the formulation of sustained-release tablets of diltiazem, a model drug. METHODS: Central design composite was adopted for the formulation and optimization of tablet formulations. The two gums have been selected as independent variables. The dependent factors chosen were the amount of drug released in 1st hour (Y1), amount of drug released after 12 h (Y2), diffusion exponent (Y3), and time for half of the total drug released (T50%) (Y4). Wet granulation approach was used for the formulation of tablets. FT-IR, DSC, in vitro dissolution, swelling-erosion investigations, SEM, and stability studies were carried out. RESULTS AND DISCUSSION: It was evident that the release pattern from the prepared formulations was significantly influenced by the quantity of gum(s) in the tablet. FT-IR and DSC results confirm drug-polymer compatibility. Polynomial equations were used for the prediction of quantitative impact of independent factors at different levels on response variables. After ANOVA analysis, the significant factors were considered for constrained optimization to get the optimized formula. The optimized formula generated by the response surface methodology was evaluated both for in vitro and in vivo properties. The optimized formula and a sustained-release marketed product were subjected to in vivo studies in rabbits and the results of the t-test demonstrated insignificant variation in pharmacokinetic parameters among the two formulations, confirming that the prepared tablet showed sustained-release profile. CONCLUSION: The results indicated that karaya and locust bean gum can be effectively used to formulate sustained-release tablets.

A study on the protease activity and structure of pepsin in the presence of atenolol and diltiazem.

Pepsin, as the main protease of the stomach, plays an important role in the digestion of food proteins into smaller peptides and performs about 20% of the digestive function. The role of pepsin in the development of gastrointestinal ulcers has also been studied for many years. Edible drugs that enter the body through the gastrointestinal tract will interact with this enzyme as one of the first targets. Continuous and long-term usage of some drugs will cause chronic contact of the drug with this protein, and as a result, the structure and function of pepsin may be affected. Therefore, the possible effect of atenolol and diltiazem on the structure and activity of pepsin was studied. The interaction of drugs with pepsin was evaluated using various experimental methods including UV-Visible spectroscopy, fluorescence spectroscopy, FTIR and enzymatic activity along with computational approaches. It was showed that after binding of atenolol and diltiazem to pepsin, the inherent fluorescence of the protein is quenched. Determination of the thermodynamic parameters of interactions between atenolol and diltiazem with pepsin indicates that the major forces in the formation of the protein-drug complexes are hydrophobic forces and also atenolol has a stronger protein bonding than diltiazem. Additional tests also show that the protease activity of pepsin, decreases and increases in the presence of atenolol and diltiazem, respectively. Investigation of the FTIR spectrum of the protein in the presence and absence of atenolol and diltiazem show that in the presence of atenolol the structure of protein has slightly changed. Molecular modeling studies, in agreement with the experimental results, confirm the binding of atenolol and diltiazem to the enzyme pepsin and show that the drugs are bind close to the active site of the enzyme. Finally, from experimental and computational results, it can be concluded that atenolol and diltiazem interact with the pepsin and change its structure and protease activity.

Robustness of Controlled Release Tablets Based on a Cross-linked Pregelatinized Potato Starch Matrix.

The aim of this study was to evaluate the potential of a cross-linked pregelatinized potato starch (PREGEFLO® PI10) as matrix former for controlled release tablets. Different types of tablets loaded with diprophylline, diltiazem HCl or theophylline were prepared by direct compression of binary drug/polymer blends. The drug content was varied from 20 to 50%. Two hydroxypropyl methylcellulose grades (HPMC K100LV and K100M) were studied as alternative matrix formers. Drug release was measured in a variety of release media using different types of experimental set-ups. This includes 0.1 N HCl, phosphate buffer pH 6.8 and water, optionally containing different amounts of NaCl, sucrose, ethanol or pancreatin, fasted state simulated gastric fluid, fed state simulated gastric fluid, fasted state simulated intestinal fluid, fed state simulated intestinal fluid as well as media simulating the conditions in the colon of healthy subjects and patients suffering from Crohn's disease. The USP apparatuses I/II/III were used under a range of operating conditions and optionally coupled with the simulation of additional mechanical stress. Importantly, the drug release kinetics was not substantially affected by the investigated environmental conditions from tablets based on the cross-linked pregelatinized potato starch, similar to HPMC tablets. However, in contrast to the latter, the starch-based tablets roughly kept their shape upon exposure to the release media (they "only" increased in size) during the observation period, and the water penetration into the systems was much less pronounced. Thus, the investigated cross-linked pregelatinized potato starch offers an interesting potential as matrix former in controlled release tablets.

Fabrication of an osmotic 3D printed solid dosage form for controlled release of active pharmaceutical ingredients.

In pharmaceutical formulations, pharmacokinetic behavior of the Active Pharmaceutical Ingredients (API's) is significantly affected by their dissolution profiles. In this project, we attempted to create personalized dosage forms with osmotic properties that exhibit different API release patterns via Fused Deposition Modelling (FDM) 3D printing. Specifically, cellulose acetate was employed to create an external shell of an osmotically active core containing Diltiazem (DIL) as model drug. By removing parts of the shell (upper surface, linear lateral segments) were created dosage forms that modify their shape at specific time frames under the effect of the gradually induced osmotic pressure. Hot-Melt Extrusion (HME) was employed to fabricate two different 3DP feeding filaments, for the creation of either the shell or the osmotic core (dual-extrusion printing). Printed formulations and filaments were characterized by means of (TGA, XRD, DSC) and inspected using microscopy (optical and electron). The mechanical properties of the filaments were assessed by means of micro- and macro mechanical testing, whereas micro-Computed Tomography (µCT) was employed to investigate the volumetric changes occurring during the hydration process. XRD indicated the amorphization of DIL inside HME filaments and printed dosage forms, whereas the incorporated NaCl (osmogen) retained its crystallinity. Mechanical properties' testing confirmed the printability of produced filaments. Dissolution tests revealed that all formulations exhibited sustained release differing at the initiation time of the API dissolution (0, 120 and 360 min for the three different formulations). Finally, µCT uncovered the key structural changes associated with distinct phases of the release profile. The above results demonstrate the successful utilization of an FDM 3D printer in order to create osmotic 3D printed formulations exhibiting sustained and/or delayed release, that can be easily personalized containing API doses corresponding to each patient's specific needs.

Structural Basis for Diltiazem Block of a Voltage-Gated Ca2+ Channel.

Diltiazem is a widely prescribed Ca2+ antagonist drug for cardiac arrhythmia, hypertension, and angina pectoris. Using the ancestral CaV channel construct CaVAb as a molecular model for X-ray crystallographic analysis, we show here that diltiazem targets the central cavity of the voltage-gated Ca2+ channel underneath its selectivity filter and physically blocks ion conduction. The diltiazem-binding site overlaps with the receptor site for phenylalkylamine Ca2+ antagonist drugs such as verapamil. The dihydropyridine Ca2+ channel blocker amlodipine binds at a distinct site and allosterically modulates the binding sites for diltiazem and Ca2+ Our studies resolve two distinct binding poses for diltiazem in the absence and presence of amlodipine. The binding pose in the presence of amlodipine may mimic a high-affinity binding configuration induced by voltage-dependent inactivation, which is favored by dihydropyridine binding. In this binding pose, the tertiary amino group of diltiazem projects upward into the inner end of the ion selectivity filter, interacts with ion coordination Site 3 formed by the backbone carbonyls of T175, and alters binding of Ca2+ to ion coordination Sites 1 and 2. Altogether, our results define the receptor site for diltiazem and elucidate the mechanisms for pore block and allosteric modulation by other Ca2+ channel-blocking drugs at the atomic level. SIGNIFICANCE STATEMENT: Calcium antagonist drugs that block voltage-gated calcium channels in heart and vascular smooth muscle are widely used in the treatment of cardiovascular diseases. Our results reveal the chemical details of diltiazem binding in a blocking position in the pore of a model calcium channel and show that binding of another calcium antagonist drug alters binding of diltiazem and calcium. This structural information defines the mechanism of drug action at the atomic level and provides a molecular template for future drug discovery.

In vitro and ex vivo studies on diltiazem hydrochloride-loaded microsponges in rectal gels for chronic anal fissures treatment.

Diltiazem hydrochloride, topically applied at 2% concentration, is considered effective for the treatment of chronic anal fissures, although it involves several side effects among which anal pruritus and postural hypotension. To test the hypothesis that a sustained delivery system of diltiazem hydrochloride may be helpful for the treatment of chronic anal fissures, in the present study we evaluated the potential of gels containing diltiazem hydrochloride entrapped in microsponges. Such microsponges were based on Eudragit RS 100 and the effect of some formulation variables was assessed by a 23 full factorial screening design. An optimized formulation of diltiazem hydrochloride microsponges was dispersed in Methylcellulose 2% or Poloxamer 407 20% and the resulting gels (micro-l-diltiazem hydrochloride 2%) were subjected to in vitro drug release, ex vivo permeability and drug deposition after application on porcine rectal mucosa. The results showed a prolonged release up to 24 h from micro-l-diltiazem hydrochloride at 2% in the gels. The permeation tests revealed up to 18% higher drug retention on the mucosal tissue after 24 h by the micro-l-diltiazem hydrochloride 2% gels compared to conventional diltiazem hydrochloride gels at 2%. These results suggest that diltiazem hydrochloride-loaded microsponges dispersed in rectal gels may be useful to overcome some limitations of conventional local chronic anal fissure therapy.

The P-glycoprotein inhibitor diltiazem-like 8-(4-chlorophenyl)-5-methyl-8-[(2Z)-pent-2-en-1-yloxy]-8H-[1,2,4]oxadiazolo[3,4-c][1,4]thiazin-3-one inhibits esterase activity and H3 histone acetylation.

With the aim to reduce multidrug resistance several molecules were synthesized and tested for their ability to inhibit ATP-binding cassette (ABC) proteins, which are responsible for drugs transport out from cells. The compound 8-(4-chlorophenyl)-5-methyl-8-[(2Z)-pent-2-en-1-yloxy]-8H-[1,2,4]oxadiazolo[3,4-c][1,4]thiazin-3-one namely 2c, is structurally related to the myocardial-calcium-channel-modulator diltiazem and is considered one of the most efficient P-glycoprotein inhibitors, able to induce apoptosis at low concentrations of doxorubicin in multidrug resistant ovarian cells. In this study experiments were carried out to evaluate other biological activities of compound 2c. We verified the ability of 2c to inhibit ABC transporters do not involved in drug resistance and considering the inhibitory effect of diltiazem on recombinant human carboxylesterase, we observed its inhibitory effect on the esterase activity. Our findings demonstrated that 2c exhibits broad-spectrum activity as ABC transporters inhibitor being able to inhibit ABCC6, a protein belonging to the ABC family although poorly involved in drug resistance. 2c also inhibits cell esterase activity, acetylcholine esterase activity in vitro and cell histone H3 acetylation according to its structural homology with some known HAT inhibitors. The results obtained provide new knowledge on the biological activities of 2c and represent useful information when it is used as an inhibitor of drug resistance.

Effect of substitution of plasticizer dibutyl phthalate with dibutyl sebacate on Eudragit® RS30D drug release rate control.

In the current study, the influence of type of plasticizer used with Eudragit® RS 30D on the drug release was investigated in solid dosage form extrusion/spheronization, and film coating. The drug pellets were coated for controlling drug release with Eudragit® RS 30D containing dibutyl phthalate and compared with dibutyl sebacate as an alternative plasticizer. To study the influence of pH of the dissolution medium on the drug release profile, capsules are tested for drug release profile at pH 1.2, 4.4, and 6.3. Additionally, the aging effect on the curing of Eudragit® RS 30D is evaluated by exposing the capsules dosage form to room temperature (25 °C ± 2 °C/60% ± 5% RH) for time 0, 3, 6, and 9 months, accelerated temperature (40 °C ± 2 °C/75% ± 5% RH) for time 0, 3, and 6 months, and intermediate temperature (30 °C ± 2 °C/65% ± 5% RH) for time 0, 6, and 9 months. The replacement of dibutyl phthalate, with dibutyl sebacate for polymer coating system in similar concentration is comparable with respect to plasticization effect. The coalescence of the polymer particles is not changed and requires no additional processing parameter control or additional curing time.

Optical control of L-type Ca2+ channels using a diltiazem photoswitch.

L-type Ca2+ channels (LTCCs) play a crucial role in excitation-contraction coupling and release of hormones from secretory cells. They are targets of antihypertensive and antiarrhythmic drugs such as diltiazem. Here, we present a photoswitchable diltiazem, FHU-779, which can be used to reversibly block endogenous LTCCs by light. FHU-779 is as potent as diltiazem and can be used to place pancreatic ß-cell function and cardiac activity under optical control.

Multi-purposable filaments of HPMC for 3D printing of medications with tailored drug release and timed-absorption.

Three-dimensional printing (3DP), though developed for nonmedical applications and once regarded as futuristic only, has recently been deployed for the fabrication of pharmaceutical products. However, the existing feeding materials (inks and filaments) that are used for printing drug products have various shortcomings, including the lack of biocompatibility, inadequate extrudability and printability, poor drug loading, and instability. Here, we have sought to develop a filament using a single pharmaceutical polymer, with no additives, which can be multi-purposed and manipulated by computational design for the preparation of tablets with desired release and absorption patterns. As such, we have used hydroxypropyl-methylcellulose (HPMC) and diltiazem, a model drug, to prepare both drug-free and drug-impregnated filaments, and investigated their thermal and crystalline properties, studied the cytotoxicity of the filaments, designed and printed tablets with various infill densities and patterns. By alternating the drug-free and drug-impregnated filaments, we fabricated various types of tablets, studied the drug release profiles, and assessed oral absorption in rats. Both diltiazem and HPMC were stable at extrusion and printing temperatures, and the drug loading was 10% (w/w). The infill density, as well as infill patterns, influenced the drug release profile, and thus, when the infill density was increased to 100%, the percentage of drug released dramatically declined. Tablets with alternating drug-free and drug-loaded layers showed delayed and intermittent drug release, depending on when the drug-loaded layers encountered the dissolution media. Importantly, the oral absorption patterns accurately reproduced the drug release profiles and showed immediate, extended, delayed and episodic absorption of the drug from the rat gastrointestinal tract (GIT). Overall, we have demonstrated here that filaments for 3D printers can be prepared from a pharmaceutical polymer with no additives, and the novel computational design allows for fabricating tablets with the capability of producing distinct absorption patterns after oral administration.

Stability and bioavailability of diltiazem/polyethylene oxide matrix tablets.

The aim of this study was to prepare and evaluate in vitro and in vivo; Diltiazem-Hydrochloride (DTZ) in sustained-release matrix tablets. Stability of DTZ tablets prepared with polyethylene oxide (MWs 900 000, 4 000 000, and 8 000 000) with or without addition of electrolytes was carried-out for 1-month, under short-term storage at 40 °C/75% RH. Stability was evaluated by DTZ content, DSC and drug release using the Flow-Through Cell (USP # IV). The majority of stored tablets were stable for 1-month under short-term storage with respect to DTZ content and drug release. DSC curves of stored samples showed appearance of new exothermic peak after 1-month storage at 40 °C/75% RH, which was not observed after 5 years storage at room temperature. A selected formula was tested in vivo against reference product on eight healthy human volunteers. DTZ-plasma profiles were different between the two formulae. However, no statistically significant differences were detected between Cmax, AUC0-48 and AUC0-∞. The two products were therapeutically in-equivalent, as 90% confidence intervals "T/R" were 88.82-205.76, 91.40-139.94, and 93.73-134.97 for Cmax, AUC0-48 and AUC0-∞, respectively. This study highlighted possible differences observed between the two regimes frequently applied for stability testing.

The role of biopolymer matrix films derived from carboxymethyl cellulose, sodium alginate and polyvinyl alcohol on the sustained transdermal release of diltiazem.

Due to changing lifestyles of modern world, cardiac failures are increasing day by day. Drug delivery systems that can overcome the drawbacks of conventional drug administration are highly desired. Diltiazem hydrochloride (DTZ) is a common and effective drug used for cardiac failures. However, its efficient loading, high bio availability and sustained transdermal release from polymer matrix are of high demand. Herein, the main objective was to fabricate a transdermal drug delivery system (TDDS) capable of efficient DTZ loading with sustained release. Owing to the high hydrophilicity of DTZ, a hydrophilic matrix comprising of poly ethylene glycol coated vinyl trimethoxy silane-g-chitosan (PEG@VTMS-g-CS) was developed. DTZ encapsulated copolymer was dispersed in matrices like sodium alginate (ALG), carboxy methyl cellulose (CMC) and poly vinyl alcohol (PVA). Economic viability and cosmetic attractiveness of the films were evaluated and optimum results were obtained for PVA matrix. The in vitro skin penetration study of DTZ on rat skin further demonstrated the efficacy of PVA based film which yielded more than 40.0% cell viability on HaCaT and PBMC cell line with no histological changes on the skin which further confirmed the practical utility of the prepared film.

Effect of Ca+2 ion on the release of diltiazem hydrochloride from matrix tablets of carboxymethyl xanthan gum graft polyacrylamide.

The effect of Ca2+ ion cross-linker on acryalamide grafted carboxymethyl xanthan gum (CMXG-g-PAAm) on the drug release was investigated. Previously, CMXG was synthesized from XG and further grafted to CMXG-g-PAAm to retard the drug release. Once the CaCl2 solution is added to CMXG-g-PAAm, Ca2+ considerably affected the drug release mechanism mainly by diffusion and erosion. In order to validate the grafted polymer, tablets were prepared using wet granulation and dry granulation methods It has been noticed that the tablets prepared by wet granulation successfully controls the release of the drug over an extended period of time. Moreover, the release profile was aligned to Korsmeyer-Peppas equation and exhibited the drug transport mechanism via diffusion and erosion.

Physicochemical characterisation and investigation of the bonding mechanisms of API-titanate nanotube composites as new drug carrier systems.

Titanate nanotube (TNT) has recently been explored as a new carrier material for active pharmaceutical ingredients (API). The aim of the present work was to reveal the physicochemical properties of API-TNT composites, focusing on the interactions between the TNTs and the incorporated APIs. Drugs belonging to different Biopharmaceutical Classification System (BCS) classes were loaded into TNTs: diltiazem hydrochloride (BCS I.), diclofenac sodium (BCS II.), atenolol (BCS III.) and hydrochlorothiazide (BCS IV.). Experimental results demonstrated that it is feasible for spiral cross-sectioned titanate nanotubes to carry drugs and maintain their bioactivity. The structural properties of the composites were characterized by a range of analytical techniques, including FT-IR, DSC, TG-MS, etc. The interactions between APIs and TNTs were identified as electrostatic attractions, mainly dominated by hydrogen bonds. Based on the results, it can be stated that the strength of the association depends on the hydrogen donor strength of the API. The drug release of incorporated APIs was evaluated from compressed tablets and compared to that of pure APIs. Differences noticed in the dissolution profiles due to incorporation showed a correlation with the strength of interactions between the APIs and the TNTs observed in the above analytical studies.