RESUMO
Radiotherapy (RT) is one of the major treatment modalities among surgery and chemotherapy for carcinoma breast. The surface dose study of modified reconstructive constructive Mastectomy (MRM) breast is important due to the heterogeneity in the body contour and the conventional treatment angle to save the lungs and heart from the radiation. These angular entries of radiation beam cause an unpredictable dose deposition on the body surface, which has to be monitored. Thermoluminescent dosimeter (TLD) or optically stimulated luminescent dosimeter (nano OSLD) are commonly preferable dosimeters for this purpose. The surface dose response of TLD and nano OSLD during MRM irradiation has been compared with the predicted dose from the treatment planning system (TPS). The study monitored 100 MRM patients by employing a total 500 dosimeters consisting of TLD (n = 250) and nano OSLD (n = 250), during irradiation from an Elekta Versa HD 6 MV Linear accelerator. The study observed a variance of 3.9% in the dose measurements for TLD and 3.2% for nano OSLD from the planned surface dose, with a median percentage dose of 44.02 for nano OSLD and 40.30 for TLD (p value 0.01). There was no discernible evidence of variation in dose measurements attributable to differences in field size or from patient to patient. Additionally, no variation was observed in dose measurements when comparing the placement of the dosimeter from central to off-centre positions. In comparison, a minor difference in dose measurements were noted between TLD and nano OSLD, The study's outcomes support the applicability of both TLD and nano OSLD as effective dosimeters during MRM breast irradiation for surface dose evaluation.
Assuntos
Neoplasias da Mama , Mastectomia , Dosagem Radioterapêutica , Dosimetria Termoluminescente , Humanos , Feminino , Dosimetria Termoluminescente/métodos , Neoplasias da Mama/radioterapia , Neoplasias da Mama/cirurgia , Planejamento da Radioterapia Assistida por Computador/métodos , Dosimetria por Luminescência Estimulada Opticamente/métodos , Pessoa de Meia-Idade , Doses de Radiação , Adulto , Mama/efeitos da radiação , Mama/cirurgiaRESUMO
Objective. This study characterized optically-stimulated luminescent dosimeter (OSLD) nanoDots for use in a therapeutic carbon beam using the Imaging and Radiation Oncology Core (IROC) framework for remote output verification.Approach. The absorbed dose correction factors for OSLD (fading, linearity, beam quality, angularity, and depletion), as defined by AAPM TG 191, were characterized for carbon beams. For the various correction factors, the effect of linear energy transfer (LET) was examined by characterizing in both a low and high LET setting.Main results. Fading was not statistically different between reference photons and carbon, nor between low and high LET beams; thus, the standard IROC-defined exponential function could be used to characterize fading. Dose linearity was characterized with a linear fit; while low and high LET carbon linearity was different, these differences were small and could be rolled into the uncertainty budget if using a single linearity correction. A linear fit between beam quality and dose-averaged LET was determined. The OSLD response at various angles of incidence was not statistically different, thus a correction factor need not be applied. There was a difference in depletion between low and high LET irradiations in a primary carbon beam, but this difference was small over the standard five readings. The largest uncertainty associated with the use of OSLDs in carbon was because of thekQcorrection factor, with an uncertainty of 6.0%. The overall uncertainty budget was 6.3% for standard irradiation conditions.Significance. OSLD nanoDot response was characterized in a therapeutic carbon beam. The uncertainty was larger than for traditional photon applications. These findings enable the use of OSLDs for carbon absorbed dose measurements, but with less accuracy than conventional OSLD audit programs.
Assuntos
Carbono , Carbono/química , Carbono/uso terapêutico , Radiometria/métodos , Transferência Linear de Energia , Incerteza , Dosimetria por Luminescência Estimulada Opticamente/métodos , Dosagem Radioterapêutica , HumanosRESUMO
Optically stimulated luminescence (OSL) film dosimeters, based on BaFBr:Eu2+phosphor material, have major dosimetric advantages such as dose linearity, high spatial resolution, film re-usability, and immediate film readout. However, they exhibit an energy-dependent over-response at low photon energies because they are not made of tissue-equivalent materials. In this work, the OSL energy-dependent response was optimized by lowering the phosphor grain size and seeking an optimal choice of phosphor concentration and film thickness to achieve sufficient signal sensitivity. This optimization process combines measurement-based assessments of energy response in narrow x-ray beams with various energy response calculation methods applied to different film metrics. Theoretical approaches and MC dose simulations were used for homogeneous phosphor distributions and for isolated phosphor grains of different dimensions, where the dose in the phosphor grain was calculated. In total 8 OSL films were manufactured with different BaFBr:Eu2+median particle diameters (D50): 3.2µm, 1.5µm and 230 nm and different phosphor concentrations (1.6%, 5.3% and 21.3 %) and thicknesses (from 5.2 to 49µm). Films were irradiated in narrow x-ray spectra (N60, N80, N-150 and N-300) and the signal intensity relative to the nominal dose-to-water value was normalized to Co-60. Finally, we experimentally tested the response of several films in Varian 6MV TrueBeam STx linear accelerator using the following settings: 10 × 10 cm2field, 0deggantry angle, 90 cm SSD, 10 cm depth. The x-ray irradiation experiment reported a reduced energy response for the smallest grain size with an inverse correlation between response and grain size. The N-60 irradiation showed a 43% reduction in the energy over-response when going from 3µm to 230 nm grain size for the 5% phosphor concentration. Energy response calculation using a homogeneous dispersion of the phosphor underestimated the experimental response and was not able to obtain the experimental correlation between grain size and energy response. Isolated grain size modeling combined with MC dose simulations allowed to establish a good agreement with experimental data, and enabled steering the production of optimized OSL-films. The clinical 6 MV beam test confirmed a reduction in energy dependence, which is visible in small-grain films where a decrease in out-of-field over-response was observed.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Método de Monte Carlo , Radiometria , Luminescência , Raios X , Dosimetria Fotográfica/métodosRESUMO
Objective.The aim of this work is to investigate the dose rate dependence of thermoluminescence and optically stimulated luminescence detectors (TLDs and OSLDs) in a wide uniform ultra-high dose rate electron beam and demonstrate the potential use of TLDs and OSLDs to correct the ion recombination in air-filled ionization chambers. This study avoids previously reported complications related to the field size and homogeneity.Approach.Two types of OSLDs (BeO and Al2O3:C) and three types of TLDs (LiF:Mg,Ti, LiF:Mg,Cu,P, CaF2:Tm) were irradiated simultaneously in a uniform 16 MeV electron beam generated by a clinically decommissioned C-Arm LINAC, modified to deliver doses per pulse between 8.3 × 10-4Gy and 1.255 Gy, corresponding to instantaneous dose rates between 2 × 102Gy s-1and 3 × 105Gy s-1. A prototype ultra-thin parallel plate ionization chamber was employed as reference detector.Main results.Reproducible results were achieved both at conventional (standard deviation of the data <2%) and at the highest dose per pulse (standard deviation of the data <4%). No trend in the dose rate response of the TLDs and OSLDs was observed in the investigated dose per pulse range. The Al2O3:C OSLD was found to be the most precise detector, with a standard deviation of the data <2% at all investigated dose rates and dose levels.Significance.The dose rate independence of the investigated TLDs and OSLDs make them good candidates for dosimetry at ultra-high dose rates, at least up to 3 × 105Gy s-1. A dose rate independent method to measure the dose per pulse is proposed, which can be applied to characterize ultra-high dose rate electron beams and correct for ion recombination in ionization chambers.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Elétrons , Radiometria/métodos , LuminescênciaRESUMO
BACKGROUND: The continued development of new radiotherapy techniques requires dosimetry systems that satisfy increasingly rigorous requirements, such as high sensitivity, wide dose range, and high spatial resolution. An emerging requirement is the ability to read out doses in three dimensions (3D) with high precision and spatial resolution. A few dosimetry systems with 3D capabilities are available, but their application in a clinical workflow is limited for various reasons, primarily originating from their chemical nature. The search for a 3D dosimetry system with potential for clinical implementation is thus ongoing. PURPOSE: To demonstrate the capabilities of a novel optically-stimulated-luminescence (OSL)-based 3D dosimetry system capable of measuring radiation doses in clinically relevant volumes. METHODS: A laser-based readout system was used to measure dose distributions delivered by both photons and protons, utilizing the OSL from a 50 × 50 × 50 $50\times 50\times 50$ mm 3 $^3$ YSO:Ce crystal. A homogeneous treatment plan consisting of two opposing photon fields was used to establish an inhomogeneity correction map of the crystal response and demonstrated the accuracy and precision of the system. The crystal was additionally irradiated with a photon treatment plan consisting of three overlapping 10 × 10 $10\times 10$ mm 2 $^2$ fields delivered from different angles, and a proton treatment plan consisting of four pencil beams with energies 90 MeV ( × 2 $\times 2$ ), 115 MeV, and 140 MeV. The system abilities were quantified by comparing the 3D-resolved measurements to Monte Carlo simulations. RESULTS: The dose map reproducibility of the system was found to be within 2% including both statistical and systematic errors. The measurements yielded integrated doses from a volume of 50 × 50 × 40 $50\times 50\times 40$ mm 3 $^3$ with voxel volumes of just 0.28 × 0.28 × 0.50 $0.28\times 0.28\times 0.50$ mm 3 $^3$ . An excellent agreement between the 3D-resolved measurements and the simulations was found for both photon- and proton-irradiation. CONCLUSIONS: The capabilities of the devised system for measuring clinically relevant fields of photons and proton pencil beams within a clinically relevant volume were demonstrated. The system poses as a promising candidate for clinical applications, and enables future research in the field of OSL-based tissue-equivalent 3D dosimetry.
Assuntos
Luminescência , Dosimetria por Luminescência Estimulada Opticamente , Prótons , Reprodutibilidade dos Testes , Radiometria/métodosRESUMO
Radiotherapy is part of the treatment of over 50% of cancer patients. Its efficacy is limited by the radiotoxicity to the healthy tissue. FLASH-RT is based on the biological effect that ultra-high dose rates (UHDR) and very short treatment times strongly reduce normal tissue toxicity, while preserving the anti-tumoral effect. Despite many positive preclinical results, the translation of FLASH-RT to the clinic is hampered by the lack of accurate dosimetry for UHDR beams. To date radiochromic film is commonly used for dose assessment but has the drawback of lengthy and cumbersome read out procedures. In this work, we investigate the equivalence of a 2D OSL system to radiochromic film dosimetry in terms of dose rate independency. The comparison of both systems was done using the ElectronFlash linac. We investigated the dose rate dependence by variation of the (1) modality, (2) pulse repetition frequency, (3) pulse length and (4) source to surface distance. Additionally, we compared the 2D characteristics by field size measurements. The OSL calibration showed transferable between conventional and UHDR modality. Both systems are equally independent of average dose rate, pulse length and instantaneous dose rate. The OSL system showed equivalent in field size determination within 3 sigma. We show the promising nature of the 2D OSL system to serve as alternative for radiochromic film in UHDR electron beams. However, more in depth characterization is needed to assess its full potential.
Assuntos
Elétrons , Dosimetria por Luminescência Estimulada Opticamente , Humanos , Imagens de Fantasmas , Radiometria , Planejamento da Radioterapia Assistida por Computador/métodos , Dosimetria Fotográfica/métodosRESUMO
Objective. This work focuses on the optically stimulated luminescence dosimetry (OSLD) dose-response characterization, with emphasis on 1.5T MR-Linacs.Approach. Throughout this study, the nanoDots OSLDs (Landauer, USA) were considered. In groups of three, the mean OSLD response was measured in a conventional linac and an MR-Linac under various irradiation conditions to investigate (i) dose-response linearity with and without the 1.5T magnetic field, (ii) signal fading rate and its dependencies, (iii) beam quality, detector orientation and dose rate dependencies in a conventional linac, (iii) potential MR imaging related effects on OSLD response and (iv) detector orientation dependence in an MR-Linac. Monte Carlo calculations were performed to further quantify angular dependence after rotating the detector around its central axis parallel to the magnetic field, and determine the magnetic field correction factors,kB,Q,for all cardinal detector orientations.Main results. OSLD dose-response supralinearity in an MR-Linac setting was found to agree within uncertainties with the corresponding one in a conventional linac, for the axial detector orientation investigated. Signal fading rate does not depend on irradiation conditions for the range of 3-30 d considered. OSLD angular (orientation) dependence is more pronounced under the presence of a magnetic field. OSLDs irradiated with and without real-time T2w MR imaging enabled during irradiation yielded the same response within uncertainties.kB,Qvalues were determined for all three cardinal orientations. Corrections needed reached up to 6.4%. However, if OSLDs are calibrated in the axial orientation and then irradiated in an MR-Linac placed again in the axial orientation (perpendicular to the magnetic field), then simulations suggest thatkB,Qcan be considered unity within uncertainties, irrespective of the incident beam angle.Significance. This work contributes towards OSLD dose-response characterization and relevant correction factors availability. OSLDs are suitable for QA checks in MR-based beam gating applications andin vivodosimetry in MR-Linacs.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Dosímetros de Radiação , RadiometriaRESUMO
Objective.This work investigates the use of Al2O3:C and Al2O3:C,Mg optically stimulated luminescence (OSL) detectors to determine both the dose and the radiation quality in light ion beams. The radiation quality is here expressed through either the linear energy transfer (LET) or the closely related metricQeff, which depends on the particle's speed and effective charge. The derived LET andQeffvalues are applied to improve the dosimetry in light ion beams.Approach.OSL detectors were irradiated in mono-energetic1H-,4He-,12C-, and16O-ion beams. The OSL signal is associated with two emission bands that were separated using a pulsed stimulation technique and subjected to automatic corrections based on reference irradiations. Each emission band was investigated independently for dosimetry, and the ratio of the two emission intensities was parameterized as a function of fluence- and dose-averaged LET, as well asQeff. The determined radiation quality was subsequently applied to correct the dose for ionization quenching.Main results.For both materials, theQeffdeterminations in1H- and4He-ion beams are within 5 % of the Monte Carlo simulated values. Using the determined radiation quality metrics to correct the nonlinear (ionization quenched) detector response leads to doses within 2 % of the reference doses.Significance.Al2O3:C and Al2O3:C,Mg OSL detectors are applicable for dosimetry and radiation quality estimations in1H- and4He-ions. Only Al2O3:C,Mg shows promising results for dosimetry in12C-ions. Across both materials and the investigated ions, the estimatedQeffvalues were less sensitive to the ion types than the estimated LET values were. The reduced uncertainties suggest new possibilities for simultaneously estimating the physical and biological dose in particle therapy with OSL detectors.
Assuntos
Transferência Linear de Energia , Dosimetria por Luminescência Estimulada Opticamente , Óxido de Alumínio , Radiometria/métodos , Luminescência , Íons , Dosimetria Termoluminescente/métodosRESUMO
Aim: The aim of this study was to carried out the audit of radiotherapy centers practicing conformal radiotherapy techniques and demonstrate the suitability of this indigenous optically stimulated luminescence (OSL) disc dosimeters in beam quality audit and verification of patient-specific dosimetry in conventional and conformal treatments in radiotherapy. Materials and Methods: Dose audit in conventional and conformal (intensity-modulated radiotherapy and volumetric-modulated arc therapy) radiotherapy techniques was conducted using in-house developed Al2O3:C-based OSL disc dosimeter and commercially available Gafchromic EBT3 film in 6 MV (flat and unflat) photon and 6 and 15 MeV electron beams. OSL disc dosimeter and Gafchromic EBT3 film measured dose values were verified using the ionization chamber measurements. Results: Percentage variations of doses measured by OSL disc dosimeters and EBT3 Gafchromic film for conventional radiotherapy technique were in the range of 0.15%-4.6% and 0.40%-5.45%, respectively, with respect to the treatment planning system calculated dose values. For conformal radiotherapy techniques, the percentage variations of OSL disc and EBT3 film measured doses were in the range of 0.1%-4.9% and 0.3%-5.0%, respectively. Conclusion: The results of this study supported by statistical evidence provided the confidence that indigenously developed Al2O3:C-based OSL disc dosimeters are suitable for dose audit in conventional and advanced radiotherapy techniques.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Dosímetros de Radiação , Humanos , Luminescência , Radiometria , Óxido de AlumínioRESUMO
To analyse the fetal dose in all three trimesters in patients treated for brain tumors during pregnancy, a modified rando phantom representing three different trimesters was used with provisions for insertion of ion-chamber and Optically Simulated Luminescence Dosimeter (OSLD). The measurement regions were chosen at the level of fundus, umbilicus and pubis. Seven different treatment plans with 6FF and 6FFF beam energies were generated. Treating pregnant patients with brain tumors is safe irrespective of planning modalities except 3DCRT plan where the dose is 10.24 cGy.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Radioterapia Conformacional , Humanos , Luminescência , Dosímetros de Radiação , Radioterapia Conformacional/métodos , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Imagens de Fantasmas , Dosimetria por Luminescência Estimulada Opticamente/métodosRESUMO
BACKGROUND: Optically stimulated luminescence (OSL) dosimeters produce a signal linear to the dose, which fades with time due to the spontaneous recombination of energetically unstable electron/hole traps. When used for radiotherapy (RT) applications, fading affects the signal-to-dose conversion and causes an error in the final dose measurement. Moreover, the signal fading depends to some extent on treatment-specific irradiation conditions such as irradiation times. PURPOSE: In this work, a dose calibration function for a novel OSL film dosimeter was derived accounting for signal fading. The proposed calibration allows to perform dosimetry evaluation for different RT treatment regimes. METHODS: A novel BaFBr:Eu2+ -based OSL film (Zeff , 6 MV = 4.7) was irradiated on a TrueBeam STx using a 6 MV beam with setup: 0° gantry angle, 90 cm SSD, 10 cm depth, 10 × 10 cm2 field. A total of 86 measurements were acquired for dose-rates ( D Ì $\dot{D}$ ) of 600, 300, and 200 MU/min for irradiation times (tir ) of 0.2, 1, 2, 4.5, 12, and 23 min and various readout times (tscan ) between 4 and 1440 min from the start of the exposure (beam-on time). The OSL signal, S ( D Ì , t i r , t s c a n ) $S(\dot{D},{t}_{ir},{t}_{scan})$ , was modeled via robust nonlinear regression, and two different power-law fading models were tested, respectively, independent (linear model) and dependent on the specific t i r ${t}_{ir}$ (delivery-dependent model). RESULTS: After 1 day from the exposure, the error on the dose measurement can be as high as 48% if a fading correction is not considered. The fading contribution was characterized by two accurate models with adjusted-R2 of 0.99. The difference between the two models is <4.75% for all t i r ${t}_{ir}$ and t s c a n ${t}_{scan}$ . For different beam-on times, 3, 10.5, and 20 min, the optimum t s c a n ${t}_{scan}$ was calculated in order to achieve a signal-to-dose conversion with a model-related error <1%. In the case of a 3 min irradiation, this condition is already met when the OSL-film is scanned immediately after the end of the irradiation. For an irradiation of 10.5 and 20 min, the minimum scanning time to achieve this model-related error increases, respectively, to 30 and 90 min. Under these conditions, the linear model can be used for the signal-to-dose conversion as an approximation of the delivery-dependent model. The signal-to-dose function, D(Mi , j , t s c a n $\ {t}_{scan}$ ), has a residual mean error of 0.016, which gives a residual dose uncertainty of 0.5 mGy in the region of steep signal fading (i.e., t s c a n ${t}_{scan}\ $ = 4 min). The function of two variables is representable as a dose surface depending on the signal (Mi , j ) measured for each i,j-pixel and the time of scan ( t s c a n ${t}_{scan}$ ). CONCLUSIONS: The calibration of a novel OSL-film usable for dosimetry in different RT treatments was corrected for its signal fading with two different models. A linear calibration model independent from the treatment-specific irradiation condition results in a model-related error <1% if a proper scanning time is used for each irradiation length. This model is more practical than the delivery-dependent model because it does not need a pixel-to-pixel fading correction for different t i r ${t}_{ir}$ .
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Dosímetros de Radiação , Calibragem , Dosimetria por Luminescência Estimulada Opticamente/métodos , Radiometria , Modelos Lineares , LuminescênciaRESUMO
In respect of radiation dosimetry, several applications require dose distribution verification rather than absolute dosimetry. Most protocols use radiological and radiochromic films and ionization chambers or diode arrays for dose mapping. The films are disposable which causes the precision of the results dependent on film production variability. The measurements with arrays of ionization chambers or diodes mainly lack spatial resolution. This review aims to provide an overview of the use of optically stimulated luminescence detectors (OSLDs) for one-dimensional (1D) and two-dimensional (2D) dose mapping in different applications. It reviews the ideas, OSL materials, and applications related to the assessment of dose distribution using OSLDs in the form of film or ceramic plate (BeO). Additionally, it reviews research published in the international scientific literature from 1998 to 2021. As an outcome, a table containing the main characteristics of each relevant paper is shown. The results section was divided by the type of OSL material, and we briefly described the principal findings and the significant developments of each mentioned study such as film production and OSL reader assembly. The purpose of this study was to present an overview of the main findings of several research groups on the use of OSLD in the form of film or plate for 1D and 2D dose mapping. Finally, the potential future development of dose mapping using OSLD films was outlined.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Luminescência , Medições Luminescentes , Dosimetria por Luminescência Estimulada Opticamente/métodos , Doses de Radiação , RadiometriaRESUMO
Breast cancer is the most frequently diagnosed tumor in pregnant women and radiation therapy should carefully be weighted up because of the dose to the fetus. The aim of this study was to investigate fetal dose in a patient treated with Virtual Tangential-fields Arc Therapy (ViTAT), an innovative technique for whole breast irradiation. Optically stimulated luminescence detectors (OSLDs) were calibrated on a Varian TrueBeam linac, with both a 6X and 6XFFF beam quality, and used for out-of-field measurements. Fetal dose related with ViTAT technique was compared to the standard 3D conformal radiation therapy technique (3DCRT). The fetal dose delivered with a ViTAT technique planned with 6XFFF beam was also investigated. Measurements were taken on a phantom composed of Rando Alderson Phantom slices and solid water slabs. OSLDs were placed in a region identified by the height of the fundus from conception to the twentieth week using a custom made PMMA grid. Due to the higher number of monitor units, the peripheral dose of ViTAT delivered with 6X beams is higher than that of 3DCRT. However, nanoDots measurements prove that ViTAT can be used in place of 3DCRT while maintaining similar fetal dose levels if 6XFFF beams are used.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Dosímetros de Radiação , Feminino , Feto , Humanos , Aceleradores de Partículas , Imagens de Fantasmas , GravidezRESUMO
In the case of an unexpected exposure to radiation in places where there is no access to standard dosimeters, materials that can act as detectors in methods of retrospective dosimetry are looked for. Such materials include, but are not limited to, medicines and dietary supplements that are found in households or in personal bags. This article presents the optically stimulated luminescence (OSL) dosimetric properties of dietary supplements, the main ingredient of which is a sensitive phosphor - potassium chloride (KCl). Three types of KCl dietary supplements were tested and compared to a selection of four common drugs in terms of their sensitivity. Basic dosimetric properties of dietary supplements such as signal repeatability, dose response and fading were determined. The dose recovery test was performed 2 and 7 days after exposure to radiation. The obtained dose values for the two supplements showed good compliance with the nominal dose values and the possibility of correctly assigning the doses to the levels of triage (low dose 0-1 Gy, medium dose 1-2 Gy and high dose > 2 Gy). The presented results show that dietary supplements with KCl have the potential to be used as emergency detectors in the dose recovery process.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Suplementos Nutricionais , Luminescência , Cloreto de Potássio , Dosímetros de Radiação , Estudos RetrospectivosRESUMO
The performance of an optically stimulated luminescent (OSL) passive dosimetry system named MicroStar reader manufactured by Landauer Inc and acquired in 2011 is assessed in this study. The assessment carried out is based on the results of the intercomparison (IC) exercises organised by the International Atomic Energy Agency in 2013 and 2021. The IC results show that this OSL reader can maintain good performance after long-term usage provided adequate maintenance and calibration operations are carried out. Moreover, this assessment also reveals the importance of using a higher number of measurements per data point for the non-linearity test of the IEC 62387 standard.
Assuntos
Luminescência , Dosimetria por Luminescência Estimulada Opticamente , Calibragem , Medições LuminescentesRESUMO
The detailed dose analysis at the extremities remains a challenge, without affecting operators' mobility and their tactile sense. Using films loaded with optically stimulated luminescence (OSL) crystals have been studied in order to overcome some of these challenges in 2D dosimetry. In this work, we investigated flexible polymeric films loaded with MgB4O7:Ce,Li to acquire a better understanding of the dependence of the dosimetric signal characteristics on the production process and the influence of using different powder grain sizes. In film production, five different solvents were used: acetone-benzene, dichloromethane, chloroform, tetrahydrofuran and formic acid. Our results indicate that acetone-benzene is the solvent mixture that less influences the signal emitted by treated crystals, in comparison with the signal emitted by the pristine crystal powder. Conversely, by using formic acid, the crystalline structure of the sample was most severely modified, leading to a drastic reduction of the emitted OSL signal. We found that the extent of the grain surface in contact with the solvent in the process is important and should be taken into consideration when choosing the proper grain size to be used. Highlights Polymeric films loaded with MgB4O7:Ce,Li crystals were produced using different solvents.Different effect on the OSL signal was found depending on the used solvent.Among the evaluated solvents, acetone-benzene was the one that less affected the OSL signal.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Acetona , Benzeno , Clorofórmio , Formiatos , Furanos , Luminescência , Cloreto de Metileno , Dosimetria por Luminescência Estimulada Opticamente/métodos , Polímeros , Pós , SolventesRESUMO
Several common pharmaceuticals such as ibuprofen, paracetamol, aspirin, oral contraceptives, drugs for the prevention of motion sickness and food supplements such as table vitamins and minerals have been studied for the purposes of retrospective dosimetry using optically stimulated luminescence (OSL). The essence is that the tablets with these drug substances contain additive crystalline materials which, after irradiation and stimulation, may exhibit luminescence. For most of the pharmaceuticals and food supplements, a radiation-induced dose-dependent OSL signal was detected. Subsequently, basic dosimetric characteristics of the materials were studied, specifically sensitivity changes during repeated OSL readings, dose response, zero-dose, minimum detectable dose (MDD) and fading. The most radiation sensitive materials were food supplements with Mg providing zero-dose and MDD values at the level of several mGy. For Mg supplements, considerable sensitivity changes in OSL signal were observed. Despite this, they could be corrected using a Single-Aliquot Regenerative-dose (SAR) protocol. The OSL signals of the other materials were relatively weak but they were well reproducible and exhibited linear dose response. The MDD values were variable among the materials and ranged from 0.1 to several Gy. However, for some of the pharmaceuticals, a very high and variable zero-dose of more than 3 Gy was observed that would rule out the possibility of dose reconstruction for triage purposes. The OSL signal exhibited a significant fading rate for most of the materials. The measurements for dose reconstruction should be performed as soon as possible after irradiation, i.e. within a maximum of a few days.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Suplementos Nutricionais , Dosimetria por Luminescência Estimulada Opticamente/métodos , Preparações Farmacêuticas , Doses de Radiação , Estudos RetrospectivosRESUMO
Optically stimulated luminescence dosimetry is a relatively recent field of in-vivo dosimetry in clinical radiotherapy, developing over the last 20 years. As a pilot study, this paper presents a direct comparison between the sensitivity variance with use, stability of measurement and linearity of the current clinical standard Al2O3:C and a potential alternative, beryllium oxide. A set of ten optically stimulated luminescence dosimeters (OSLD), including five of each type, were used simultaneously and irradiated on a Versa HD linear accelerator. Having similar sensitivity, while Al2O3:C showed a relatively stable signal response from initial use, BeO was found to have a higher response to the same dose. However, BeO displayed a strong exponential decline from initial signal response following a model of [Formula: see text], reaching stability after approximately 10 irradiation cycles. BeO was shown to have potentially higher accuracy than Al2O3:C, with less variation between individual doses. Both OSLD showed good linearity between 0.2-5.0 Gy. Between these bounds, Al2O3:C demonstrated a strong linear response following the trend [Formula: see text], however beyond this showed deviation from linearity, resulting in a measured dose of [Formula: see text] Gy at 10.0 Gy dose delivery. BeO showed strong linearity across the full examined range of 0.2-10.0 Gy with following a model of [Formula: see text] Gy with a recorded dose at 10.0 Gy delivery as [Formula: see text] Gy. In conclusion, BeO does show large variance in sensitivity between individual OSLD and a considerable initial variance and decline in dose-response, however after pre-conditioning and individual normalisation to offset OSLD specific sensitivity BeO provides not only a viable alternative to Al2O3:C, but potentially provide higher accuracy, precision and reproducibility for in-vivo dosimetry.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Luminescência , Projetos Piloto , Doses de Radiação , Reprodutibilidade dos TestesRESUMO
In this contribution, we study the optically stimulated luminescence (OSL) exhibited by commercial [Formula: see text]:Ce crystals. This photon emission mechanism, complementary to scintillation, can trap a fraction of radiation energy deposited in the material and provides sufficient signal to develop a novel post-irradiation 3D dose readout. We characterize the OSL emission through spectrally and temporally resolved measurements and monitor the dose linearity response over a broad range. The measurements show that the [Formula: see text] centers responsible for scintillation also function as recombination centers for the OSL mechanism. The capture to OSL-active traps competes with scintillation originating from the direct non-radiative energy transfer to the luminescent centers. An OSL response on the order of 100 ph/MeV is estimated. We demonstrate the imaging capabilities provided by such an OSL photon yield using a proof-of-concept optical readout method. A 0.1 [Formula: see text] spatial resolution for doses as low as 0.5 Gy is projected using a cubic crystal to image volumetric dose profiles. While OSL degrades the intrinsic scintillating performance by reducing the number of scintillation photons emitted following the passage of ionizing radiation, it can encode highly resolved spatial information of the interaction point of the particle. This feature combines ionizing radiation spectroscopy and 3D reusable dose imaging in a single material.
Assuntos
Dosimetria por Luminescência Estimulada Opticamente , Diagnóstico por Imagem , Luminescência , FótonsRESUMO
The purpose of this study was to investigate dose evaluation depending on dose range using optically stimulated luminescence dosimeter (OSLD) and evaluate the possibility of high dose evaluation. This study investigated a commercial OSLD and used a Co-60 gamma irradiator for irradiation. The OSLDs (N = 26) were sampled in total OSLDs (N = 46) depending on the radiation sensitivity for this study. After irradiating doses from 0.5 to 40 Gy at fixed intervals in a standard environment, the dose response of a reference OSLD (N = 5) was determined through the reading process at each dose. The dose-response curves obtained from the reference OSLD were fitted according to the dose. In the dose range below 3 Gy, a linear function was used to determine the relationship between dose and the OSLD response. Quadratic and cubic functions were applied for dose ranges of up to 15 Gy and 40 Gy, respectively. Test OSLDs (N = 21) were evaluated at various doses (2.5 to 30 Gy) using different fitting functions, according to dose ranges. When doses from 0.5 Gy to 3.0 Gy were curve-fitted to the linear function, the relationship was y = 70278.0x - 3125.3 (r2 = 0.999). When doses of up to 15 Gy were curve-fitted to the quadratic function, the relationship was y = 628.6x2 + 70444.6x - 6142.3 (r2 = 0.999). Furthermore, when doses of up to 40 Gy were curve-fitted to the cubic function, the relation was y = -15.5x3 + 527.3x2 + 75059.6x - 16260.3 (r2 = 0.998). Test OSLDs were evaluated for various dose ranges based on the above equation. It was confirmed that the average difference was 0.86 ± 0.27%, and it was evaluated that the largest difference occurred at 30 Gy (2.24 ± 0.24%). In this study, we prove that measurements using the OSLD at various dose ranges, including high doses, will be possible through the application of an in-house software program and a correction process.