The Ethics of Electronic Tracking Devices in Dementia Care: An Interview Study with Developers.

Wandering is a symptom of dementia that can have devastating consequences on the lives of persons living with dementia and their families and caregivers. Increasingly, caregivers are turning towards electronic tracking devices to help manage wandering. Ethical questions have been raised regarding these location-based technologies and although qualitative research has been conducted to gain better insight into various stakeholders' views on the topic, developers of these technologies have been largely excluded. No qualitative research has focused on developers' perceptions of ethics related to electronic tracking devices. To address this, we performed a qualitative semi-structured interview study based on grounded theory. We interviewed 15 developers of electronic tracking devices to better understand how they perceive ethical issues surrounding the design, development, and use of these devices within dementia care. Our results reveal that developers are strongly motivated by moral considerations and believe that including stakeholders throughout the development process is critical for success. Developers felt a strong sense of moral obligation towards topics within their control and a weaker sense of moral obligation towards topics outside their control. This leads to a perceived moral boundary between development and use, where some moral responsibility is shifted to end-users.

Tropicalizing the Portable Radio: Electronics and the U.S. Military's Battle against Fungi in the Pacific War.

As the U.S. military became embroiled in "jungle warfare" across the Pacific during World War II, it was caught off guard by the rapid deterioration of materials and equipment in the tropics, where the air was hot, humid, and teeming with fungal spores. This article tells the story of how American scientists and engineers understood the "tropical deterioration" of portable radios and electronics and developed techniques to counteract it. Examining scientific efforts to prevent tropical decay reveals how exposure to tropical conditions during World War II shaped the development of portable electronics. Contributing to envirotech history and environmental media studies, this article uncovers the importance of climate proofing to the history of electronics miniaturization. Tropical deterioration, furthermore, provides a technology-focused lens for enriching our historical understanding of the tropics as an environmental imaginary.

Materials and Structural Designs toward Motion Artifact-Free Bioelectronics.

Bioelectronics encompassing electronic components and circuits for accessing human information play a vital role in real-time and continuous monitoring of biophysiological signals of electrophysiology, mechanical physiology, and electrochemical physiology. However, mechanical noise, particularly motion artifacts, poses a significant challenge in accurately detecting and analyzing target signals. While software-based "postprocessing" methods and signal filtering techniques have been widely employed, challenges such as signal distortion, major requirement of accurate models for classification, power consumption, and data delay inevitably persist. This review presents an overview of noise reduction strategies in bioelectronics, focusing on reducing motion artifacts and improving the signal-to-noise ratio through hardware-based approaches such as "preprocessing". One of the main stress-avoiding strategies is reducing elastic mechanical energies applied to bioelectronics to prevent stress-induced motion artifacts. Various approaches including strain-compliance, strain-resistance, and stress-damping techniques using unique materials and structures have been explored. Future research should optimize materials and structure designs, establish stable processes and measurement methods, and develop techniques for selectively separating and processing overlapping noises. Ultimately, these advancements will contribute to the development of more reliable and effective bioelectronics for healthcare monitoring and diagnostics.

Permeable Bioelectronics toward Biointegrated Systems.

Bioelectronics integrates electronics with biological organs, sustaining the natural functions of the organs. Organs dynamically interact with the external environment, managing internal equilibrium and responding to external stimuli. These interactions are crucial for maintaining homeostasis. Additionally, biological organs possess a soft and stretchable nature; encountering objects with differing properties can disrupt their function. Therefore, when electronic devices come into contact with biological objects, the permeability of these devices, enabling interactions and substance exchanges with the external environment, and the mechanical compliance are crucial for maintaining the inherent functionality of biological organs. This review discusses recent advancements in soft and permeable bioelectronics, emphasizing materials, structures, and a wide range of applications. The review also addresses current challenges and potential solutions, providing insights into the integration of electronics with biological organs.

Highly efficient microbial inactivation enabled by tunneling charges injected through two-dimensional electronics.

Airborne pathogens retain prolonged infectious activity once attached to the indoor environment, posing a pervasive threat to public health. Conventional air filters suffer from ineffective inactivation of the physics-separated microorganisms, and the chemical-based antimicrobial materials face challenges of poor stability/efficiency and inefficient viral inactivation. We, therefore, developed a rapid, reliable antimicrobial method against the attached indoor bacteria/viruses using a large-scale tunneling charge-motivated disinfection device fabricated by directly dispersing monolayer graphene on insulators. Free charges can be stably immobilized under the monolayer graphene through the tunneling effect. The stored charges can motivate continuous electron loss of attached microorganisms for accelerated disinfection, overcoming the diffusion limitation of chemical disinfectants. Complete (>99.99%) and broad-spectrum disinfection was achieved <1 min of attachment to the scaled-up device (25 square centimeters), reliably for 72 hours at high temperature (60°C) and humidity (90%). This method can be readily applied to high-touch surfaces in indoor environments for pathogen control.

Power-integrated, wireless neural recording systems on the cranium using a direct printing method for deep-brain analysis.

Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject's natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi-solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.

Overcoming denominator problems in refugee settings with fragmented electronic records for health and immigration data: a prediction-based approach.

BACKGROUND: Epidemiological studies in refugee settings are often challenged by the denominator problem, i.e. lack of population at risk data. We develop an empirical approach to address this problem by assessing relationships between occupancy data in refugee centres, number of refugee patients in walk-in clinics, and diseases of the digestive system. METHODS: Individual-level patient data from a primary care surveillance system (PriCarenet) was matched with occupancy data retrieved from immigration authorities. The three relationships were analysed using regression models, considering age, sex, and type of centre. Then predictions for the respective data category not available in each of the relationships were made. Twenty-one German on-site health care facilities in state-level registration and reception centres participated in the study, covering the time period from November 2017 to July 2021. RESULTS: 445 observations ("centre-months") for patient data from electronic health records (EHR, 230 mean walk-in clinics visiting refugee patients per month and centre; standard deviation sd: 202) of a total of 47.617 refugee patients were available, 215 for occupancy data (OCC, mean occupancy of 348 residents, sd: 287), 147 for both (matched), leaving 270 observations without occupancy (EHR-unmatched) and 40 without patient data (OCC-unmatched). The incidence of diseases of the digestive system, using patients as denominators in the different sub-data sets were 9.2% (sd: 5.9) in EHR, 8.8% (sd: 5.1) when matched, 9.6% (sd: 6.4) in EHR- and 12% (sd 2.9) in OCC-unmatched. Using the available or predicted occupancy as denominator yielded average incidence estimates (per centre and month) of 4.7% (sd: 3.2) in matched data, 4.8% (sd: 3.3) in EHR- and 7.4% (sd: 2.7) in OCC-unmatched. CONCLUSIONS: By modelling the ratio between patient and occupancy numbers in refugee centres depending on sex and age, as well as on the total number of patients or occupancy, the denominator problem in health monitoring systems could be mitigated. The approach helped to estimate the missing component of the denominator, and to compare disease frequency across time and refugee centres more accurately using an empirically grounded prediction of disease frequency based on demographic and centre typology. This avoided over-estimation of disease frequency as opposed to the use of patients as denominators.

Exposure to Electronic Waterpipes Increases the Risk of Occlusive Cardiovascular Disease in C57BL/6J Mice.

INTRODUCTION: It is well documented that cardiovascular disease (CVD) is the leading cause of death in the US and worldwide, with smoking being the most preventable cause. Additionally, most smokers die from thrombotic-based diseases, in which platelets play a major role. To this end, because of the proven harm of smoking, several novel tobacco products such as electronic(e)-waterpipe have been gaining popularity among different sectors of the population, partly due to their "false" safety claims. While many investigators have focused on the negative health effects of traditional cigarettes and e-cigarettes on the cardiovascular system, virtually little or nothing is known about e-waterpipes, which we investigated herein. METHODS AND MATERIALS: To investigate their occlusive CVD effects, we employed a whole-body mouse exposure model of e-waterpipe vape/smoke and exposed C57BL/6J male mice (starting at 7 weeks of age) for 1 month, with the controls exposed to clean air. Exposures took place seven times a week, according to the well-known Beirut protocol, which has been employed in many studies, as it mimics real-life waterpipe exposure scenarios; specifically, 171 puffs of 530 ml volume of the e-liquid at 2.6 s puff duration and 17 s puff interval. RESULTS: The e-waterpipe exposed mice had shortened bleeding and occlusion times, when compared to the clean air controls, indicating a prothrombotic phenotype. As for the mechanism underlying this phenotype, we found that e-waterpipe exposed platelets exhibited enhanced agonist-triggered aggregation and dense granule secretion. Also, flow cytometry analysis of surface markers of platelet activation showed that both P-selectin and integrin GPIIb-IIIa activation were enhanced in the e-waterpipe exposed platelets, relative to the controls. Finally, platelet spreading and Akt phosphorylation were also more pronounced in the exposed mice. CONCLUSION: We document that e-waterpipe exposure does exert untoward effects in the context of thrombosis-based CVD, in part, via promoting platelet hyperreactivity.

Optical and electronic properties of MgPc-Ch-diisoQ blend organic thin film as an active layer for photovoltaic cells.

Organic photovoltaic cells are a promising technology for generating renewable energy from sunlight. These cells are made from organic materials, such as polymers or small molecules, and can be lightweight, flexible, and low-cost. Here, we have created a novel mixture of magnesium phthalocyanine (MgPc) and chlorophenyl ethyl diisoquinoline (Ch-diisoQ). A coating unit has been utilized in preparing MgPc, Ch-diisoQ, and MgPc-Ch-diisoQ films onto to FTO substrate. The MgPc-Ch-diisoQ film has a spherical and homogeneous surface morphology with a grain size of 15.9 nm. The optical absorption of the MgPc-Ch-diisoQ film was measured, and three distinct bands were observed at 800-600 nm, 600-400 nm, and 400-250 nm, with a band gap energy of 1.58 eV. The current density-voltage and capacitance-voltage measurements were performed to analyze the photoelectric properties of the three tested cells. The forward current density obtained from our investigated blend cell is more significant than that for each material by about 22%. The photovoltaic parameters (Voc, Isc, and FF) of the MgPc-Ch-diisoQ cell were found to be 0.45 V, 2.12 µA, and 0.4, respectively. We believe that our investigated MgPc-Ch-diisoQ film will be a promising active layer in organic solar cells.

Modulus-tunable multifunctional hydrogel ink with nanofillers for 3D-Printed soft electronics.

Seamless integration and conformal contact of soft electronics with tissue surfaces have emerged as major challenges in realizing accurate monitoring of biological signals. However, the mechanical mismatch between the electronics and biological tissues impedes the conformal interfacing between them. Attempts have been made to utilize soft hydrogels as the bioelectronic materials to realize tissue-comfortable bioelectronics. However, hydrogels have several limitations in terms of their electrical and mechanical properties. In this study, we present the development of a 3D-printable modulus-tunable hydrogel with multiple functionalities. The hydrogel has a cross-linked double network, which greatly improves its mechanical properties. Functional fillers such as XLG or functionalized carbon nanotubes (fCNT) can be incorporated into the hydrogel to provide tunable mechanics (Young's modulus of 10-300 kPa) and electrical conductivity (electrical conductivity of ∼20 S/m). The developed hydrogel exhibits stretchability (∼1000% strain), self-healing ability (within 5 min), toughness (400-731 kJ/m3) viscoelasticity, tissue conformability, and biocompatibility. Upon examining the rheological properties in the modulated region, hydrogels can be 3D printed to customize the shape and design of the bioelectronics. These hydrogels can be fabricated into ring-shaped strain sensors for wearable sensor applications.

A novel algorithm for maximum power point tracking using computer vision (CVMPPT).

The behavior of an illuminated solar module can be characterized by its power-voltage curve. Tracking the peak of this curve is essential to harvest the maximum power by the module. The position of the peak varies with temperature and irradiance and needs to be traced. Under partial shading conditions, the number of peaks increases and makes it more difficult to find the global maximum power point (MPP). Various methods are used for maximum power point tracking (MPPT) that are based on iterations. These methods are time-consuming and fail to work satisfactorily under rapidly changing environmental conditions. In this paper, a novel algorithm is proposed that for the first time, utilizes computer vision to find the global maximum power point. This algorithm, which is implemented in Matlab/Simulink, is free of voltage iterations and gives the real-time data for the maximum power point. The proposed algorithm increases the speed and the reliability of the MPP tracking via replacing analogue electronics calculations by digital means. The validity of the algorithm is experimentally verified.

[Research on Position Verification of Multi-Leaf Collimator (MLC) and Dose Verification Based on Electronic Portal Imaging Device].

Objective: A quality control (QC) system based on the electronic portal imaging device (EPID) system was used to realize the Multi-Leaf Collimator (MLC) position verification and dose verification functions on Primus and VenusX accelerators. Methods: The MLC positions were calculated by the maximum gradient method of gray values to evaluate the deviation. The dose of images acquired by EPID were reconstructed using the algorithm combining dose calibration and dose calculation. The dose data obtained by EPID and two-dimensional matrix (MapCheck/PTW) were compared with the dose calculated by Pinnacle/TiGRT TPS for γ passing rate analysis. Results: The position error of VenusX MLC was less than 1 mm. The position error of Primus MLC was significantly reduced after being recalibrated under the instructions of EPID. For the dose reconstructed by EPID, the average γ passing rates of Primus were 98.86% and 91.39% under the criteria of 3%/3 mm, 10% threshold and 2%/2 mm, 10% threshold, respectively. The average γ passing rates of VenusX were 98.49% and 91.11%, respectively. Conclusion: The EPID-based accelerator quality control system can improve the efficiency of accelerator quality control and reduce the workload of physicists.

Edible electronics to treat the brain.

Ingestible electronic pills can be used for targeted noninvasive neuromodulation.

Exploring Geometrical, Electronic and Spectroscopic Properties of 2-Nitroimidazole-Based Radiopharmaceuticals via Computational Chemistry Methods.

Tumor hypoxia plays an important role in the clinical management and treatment planning of various cancers. The use of 2-nitroimidazole-based radiopharmaceuticals has been the most successful for positron emission tomography (PET) and single photon emission computed tomography (SPECT) imaging probes, offering noninvasive means to assess tumor hypoxia. In this study we performed detailed computational investigations of the most used compounds for PET imaging, focusing on those derived from 2-nitroimidazole: fluoromisonidazole (FMISO), fluoroazomycin arabinoside (FAZA), fluoroetanidazole (FETA), fluoroerythronitroimidazole (FETNIM) and 2-(2-nitroimidazol-1-yl)-N-(2,2,3,3,3-pentafluoropropyl)acetamide (EF5). Conformational analysis, structural parameters, vibrational IR and Raman properties (within both harmonic and anharmonic approximations), as well as the NMR shielding tensors and spin-spin coupling constants were obtained by density functional theory (DFT) calculations and then correlated with experimental findings, where available. Furthermore, time-dependent DFT computations reveal insight into the excited states of the compounds. Our results predict a significant change in the conformational landscape of most of the investigated compounds when transitioning from the gas phase to aqueous solution. According to computational data, the 2-nitroimidazole moiety determines to a large extent the spectroscopic properties of its derivatives. Due to the limited structural information available in the current literature for the investigated compounds, the findings presented herein deepen the current understanding of the electronic structures of these five radiopharmaceuticals.

Approach to the "Missing" Diarylsilylene: Formation, Characterization, and Intramolecular C-H Bond Activation of Blue Diarylsilylenes with Bulky Rind Groups.

The treatment of the bulky Rind-based dibromosilanes, (Rind)2SiBr2 (2) [Rind = 1,1,7,7-tetra-R1-3,3,5,5-tetra-R2-s-hydrindacen-4-yl: EMind (a: R1 = Et, R2 = Me) and Eind (b: R1 = R2 = Et)], with two equivalents of tBuLi in Et2O at low temperatures resulted in the formation of blue solutions derived from the diarylsilylenes, (Rind)2Si: (3). Upon warming the solutions above -20 °C, the blue color gradually faded, accompanying the decomposition of 3 and yielding cyclic hydrosilanes (4) via intramolecular C-H bond insertion at the Si(II) center. The molecular structures of the bulky Eind-based 3b and 4b were confirmed by X-ray crystallography. Thus, at -20 °C, blue crystals were formed (Crystal-A), which were identified as mixed crystals of 3b and 4b. Additionally, colorless crystals of 4b as a singular component were isolated (Crystal-B), whose structure was also determined by an X-ray diffraction analysis. Although the isolation of 3 was difficult due to their thermally labile nature, their structural characteristics and electronic properties were discussed based on the experimental findings complemented by computational results. We also examined the hydrolysis of 3b to afford the silanol, (Eind)2SiH(OH) (5b).

Harnessing technology to improve sleep in frontline healthcare workers: A pilot study of electronic noise-masking earbuds on subjective and objective sleep measures.

Objective: This pilot study assessed the effects of electronic noise-masking earbuds on subjective sleep perception and objective sleep parameters among healthcare workers (HCWs) reporting sleep difficulties during the COVID-19 pandemic. Methods: Using a pre-post design, 77 HCWs underwent 3 nights of baseline assessment followed by a 7-night intervention period. Participants wore an at-home sleep monitoring headband to assess objective sleep measures and completed subjective self-report assessments. The difference in mean sleep measures from baseline to intervention was estimated in linear mixed models. Results: Compared to baseline assessments, HCWs reported significant improvements in sleep quality as measured by the Insomnia Severity Index (ISI) (Cohen's d = 1.74, p < 0.001) and a significant reduction in perceived sleep onset latency (SOL) during the intervention (M = 17.2 minutes, SD = 7.7) compared to baseline (M = 24.7 minutes, SD = 16.1), (Cohen's d = -0.42, p = 0.001). There were no significant changes in objective SOL (p = 0.703). However, there was a significant interaction between baseline objective SOL (<20 minutes vs >20 minutes) and condition (baseline vs intervention) (p = 0.002), such that individuals with objective SOL >20 minutes experienced a significant decrease in objective SOL during the intervention period compared to baseline (p = 0.015). Conclusions: HCWs experienced a significant improvement in perceived SOL and ISI scores after using the electronic noise-masking earbuds. Our data provide preliminary evidence for a nonpharmacological intervention to improve the sleep quality of HCWs which should be confirmed by future controlled studies.

AI-Generated Draft Replies Integrated Into Health Records and Physicians' Electronic Communication.

Importance: Timely tests are warranted to assess the association between generative artificial intelligence (GenAI) use and physicians' work efforts. Objective: To investigate the association between GenAI-drafted replies for patient messages and physician time spent on answering messages and the length of replies. Design, Setting, and Participants: Randomized waiting list quality improvement (QI) study from June to August 2023 in an academic health system. Primary care physicians were randomized to an immediate activation group and a delayed activation group. Data were analyzed from August to November 2023. Exposure: Access to GenAI-drafted replies for patient messages. Main Outcomes and Measures: Time spent (1) reading messages, (2) replying to messages, (3) length of replies, and (4) physician likelihood to recommend GenAI drafts. The a priori hypothesis was that GenAI drafts would be associated with less physician time spent reading and replying to messages. A mixed-effects model was used. Results: Fifty-two physicians participated in this QI study, with 25 randomized to the immediate activation group and 27 randomized to the delayed activation group. A contemporary control group included 70 physicians. There were 18 female participants (72.0%) in the immediate group and 17 female participants (63.0%) in the delayed group; the median age range was 35-44 years in the immediate group and 45-54 years in the delayed group. The median (IQR) time spent reading messages in the immediate group was 26 (11-69) seconds at baseline, 31 (15-70) seconds 3 weeks after entry to the intervention, and 31 (14-70) seconds 6 weeks after entry. The delayed group's median (IQR) read time was 25 (10-67) seconds at baseline, 29 (11-77) seconds during the 3-week waiting period, and 32 (15-72) seconds 3 weeks after entry to the intervention. The contemporary control group's median (IQR) read times were 21 (9-54), 22 (9-63), and 23 (9-60) seconds in corresponding periods. The estimated association of GenAI was a 21.8% increase in read time (95% CI, 5.2% to 41.0%; P = .008), a -5.9% change in reply time (95% CI, -16.6% to 6.2%; P = .33), and a 17.9% increase in reply length (95% CI, 10.1% to 26.2%; P < .001). Participants recognized GenAI's value and suggested areas for improvement. Conclusions and Relevance: In this QI study, GenAI-drafted replies were associated with significantly increased read time, no change in reply time, significantly increased reply length, and some perceived benefits. Rigorous empirical tests are necessary to further examine GenAI's performance. Future studies should examine patient experience and compare multiple GenAIs, including those with medical training.

Photonics-powered augmented reality skin electronics for proactive healthcare: multifaceted opportunities.

Rapid technological advancements have created opportunities for new solutions in various industries, including healthcare. One exciting new direction in this field of innovation is the combination of skin-based technologies and augmented reality (AR). These dermatological devices allow for the continuous and non-invasive measurement of vital signs and biomarkers, enabling the real-time diagnosis of anomalies, which have applications in telemedicine, oncology, dermatology, and early diagnostics. Despite its many potential benefits, there is a substantial information vacuum regarding using flexible photonics in conjunction with augmented reality for medical purposes. This review explores the current state of dermal augmented reality and flexible optics in skin-conforming sensing platforms by examining the obstacles faced thus far, including technical hurdles, demanding clinical validation standards, and problems with user acceptance. Our main areas of interest are skills, chiroptical properties, and health platform applications, such as optogenetic pixels, spectroscopic imagers, and optical biosensors. My skin-enhanced spherical dichroism and powerful spherically polarized light enable thorough physical inspection with these augmented reality devices: diabetic tracking, skin cancer diagnosis, and cardiovascular illness: preventative medicine, namely blood pressure screening. We demonstrate how to accomplish early prevention using case studies and emergency detection. Finally, it addresses real-world obstacles that hinder fully realizing these materials' extraordinary potential in advancing proactive and preventative personalized medicine, including technical constraints, clinical validation gaps, and barriers to widespread adoption.

Perception of Healthcare Professionals towards Electronic-Prescribing at University of Gondar Comprehensive Specialized Hospital, Northwest Ethiopia: A Cross-Sectional Study.

Background: Electronic-prescribing (e-prescribing) is the most recent technological advancement in the medication use process. Its adoption and consequent realization of its potential benefits, however, mainly depend on the healthcare professionals' perception, willingness to accept, and engagement with the technology. Objectives: This study is aimed at assessing the perception of healthcare professionals towards e-prescribing at the University of Gondar Comprehensive Specialized Hospital, Northwest Ethiopia, from June 1 to August 30, 2021. Method: A cross-sectional study was conducted using a simple random sampling technique. A self-administered questionnaire was used for data collection. Data were entered into and analyzed by using the Statistical Package for the Social Sciences (SPSS® (IBM Corporation)) version 24. Both descriptive and inferential statistics like the Kruskal-Wallis and Mann-Whitney tests were used for data analysis. A statistical significance was declared at a p value < 0.05. Result: From 401 participants, the majority of study participants had a neutral perception of e-prescribing. More than two-thirds (68.8%) of them had a neutral perception towards the perceived usefulness of e-prescribing with a median (interquartile range (IQR)) perceived usefulness of 43.0 (7.0) (maximum score = 60). The perceived ease of use of e-prescribing was also neutral in the case of more than three-fourths (79.8%) of participants with a median (IQR) perceived ease of use of 49.0 (6) (maximum score = 75). Similarly, more than half (56.6%) of the participants had a neutral perception towards the perceived fitness of e-prescribing with a median (IQR) perceived fitness of 15.0 (2.5) (maximum score = 15). The perception of the participants showed a significant difference based on their qualifications and work and computer use experience. Participants who heard about e-prescribing and e-prescribing software had a significantly higher mean rank score of perceived usefulness, perceived ease of use, and perceived fitness of e-prescribing. Participants who previously used e-prescribing had also a significantly higher mean rank score of perceived usefulness. Conclusion and Recommendation. The majority of healthcare professionals had a neutral perception of e-prescribing. The perception of healthcare professionals differs based on their qualifications, work and computer use experience, and their exposure to e-prescribing. The hospital should take all expectations and concerns of all HCPs into consideration and provide experience-sharing opportunities for all healthcare professionals who may potentially be involved in e-prescribing.

Development of novel low-cost readout electronics for large field-of-view gamma camera detectors.

PURPOSE: Large scintillation crystals-based gamma cameras play a crucial role in nuclear medicine imaging. In this study, a large field-of-view (FOV) gamma detector consisting of 48 square PMTs developed using a new readout electronics, reducing 48 (6 × 8) analog signals to 14 (6 + 8) analog sums of each row and column, with reduced complexity and cost while preserving image quality. METHODS: All 14 analog signals were converted to digital signals using AD9257 high-speed analog to digital (ADC) converters driven by the SPARTAN-6 family of field-programmable gate arrays (FPGA) in order to calculate the signal integrals. The positioning algorithm was based on the digital correlated signal enhancement (CSE) algorithm implemented in the acquisition software. The performance characteristics of the developed gamma camera were measured using the NEMA NU 1-2018 standards. RESULTS: The measured energy resolution of the developed detector was 8.7 % at 140 keV, with an intrinsic spatial resolution of 3.9 mm. The uniformity was within 0.6 %, while the linearity was within 0.1 %. CONCLUSION: The performance evaluation demonstrated that the developed detector has suitable specifications for high-end nuclear medicine imaging.