Supercritical Fluid-extracted Citrus aurantium L. var. amara Engl. Essential Oil Nanoemulsion: Preparation, Characterization, and Its Sleep-promoting Effect.

To overcome the defects of Citrus aurantium L. var. amara Engl. essential oil (CAEO), such as high volatility and poor stability, supercritical fluid-extracted CAEO nanoemulsion (SFE-CAEO-NE) was prepared by the microemulsification method. Emulsifiers comprising Tween 80, polyoxyethylenated castor oil (EL-40), and 1,2-hexanediol, and an oil phase containing SFE-CAEO were used for microemulsification. We examined the physicochemical properties of SFE-CAEO-NE and steam distillation-extracted CAEO nanoemulsion (SDE-CAEO-NE), which were prepared using different concentrations of the emulsifiers. The mean particle size and zeta potential were 21.52 nm and -9.82 mV, respectively, for SFE-CAEO-NE, and 30.58 nm and -6.28 mV, respectively, for SDE-CAEO-NE, at an emulsifier concentration of 15% (w/w). SFE-CAEO-NE displayed better physicochemical properties compared with SDE-CAEO-NE. Moreover, its physicochemical properties were generally stable at different temperatures (-20-60℃), pH (3-8), and ionic strengths (0-400 mM). No obvious variations in particle size, zeta potential, and Ke were observed after storing this nanoemulsion for 30 days at 4℃, 25℃, and 40℃, suggesting that it had good stability. The sleep-promoting effect of SFE-CAEO-NE was evaluated using a mouse model of insomnia. The results of behavioral tests indicated that SFE-CAEO-NE ameliorated insomnia-like behavior. Moreover, SFE-CAEO- NE administration increased the serum concentrations of neurotransmitters such as 5-hydroxytryptamine and γ-aminobutyric acid, and decreased that of noradrenaline in mice. It also exerted a reparative effect on the function of damaged neurons. Overall, SFE-CAEO-NE displayed a good sleep-promoting effect.

Effects of ultrasound on the structural, physicochemical, and emulsifying properties of aquafaba extracted from various legumes.

This study investigated the effect of ultrasound (20-60 min, 40 kHz, 280 W) on the structural, physicochemical, and emulsifying properties of aquafaba extracted from various legumes (chickpea [CH], yellow soybean [YSB], black soybean [BSB], small black bean [SBB]). The hydrophobic amino acids and protein secondary structures (α-helix, random coil) significantly increased with sonication time (p < 0.05). The particle size of aquafaba was reduced by ultrasound (p < 0.05). A total of 27 volatile compounds were identified. Most volatiles increased with sonication time, and beany flavor was lowest in CH and SBB. The EAI, ESI, adsorbed proteins, and zeta-potential increased, while emulsion droplet size decreased in all legumes by ultrasound. The overall emulsifying properties were the highest in SBB sonicated for 40 min. This study discusses the applicability of ultrasound to aquafaba and provides insights into the functional properties and potential of aquafaba as a plant-based natural emulsifier.

Structure characterization, antioxidant and emulsifying capacities of exopolysaccharide derived from Pantoea alhagi NX-11.

Pantoea alhagi exopolysaccharides (PAPS) have been shown to enhance crop resistance to abiotic stress. However, physicochemical properties and structure of PAPS have not yet been analyzed. In this study, two PAPSs, named PAPS1 and PAPS2, were isolated and purified from the P. alhagi NX-11. The results showed PAPS1 and PAPS2 were composed of glucose, galactose, glucuronic acid, glucosamine and mannose with average molecular weight of 1.326 × 106 Da and 1.959 × 106 Da, respectively. Moreover, the structure of PAPS1 and PAPS2 was investigated by FT-IR and NMR analysis. PAPS1 was identified to have the backbone structure of →4)-ß-D-GlcpA-(1→2)-α-D-Galp-(1→3)-ß-D-Galp-(1→3)-ß-D-GlcpN- (1→3)-α-D-Galp-(1→3)-ß-D-Galp-(1→. PAPS2 had the backbone structure of →4)-ß-D-GlcpA-(1→2)-α-D-Galp-(1→3)-ß-D-Glcp-(1→3)-ß-D-GlcpN-(1→3)-α-D-Galp-(1→3)-α-D-GlcpN-(1→. In addition, PAPS1 and PAPS2 had moderate antioxidant and emulsifying capacities. Overall, the structure analysis of PAPS may point out the direction for the subsequent study of PAPS-mediated microbial and plant interactions, and further exploration of the application of PAPS.

Rheological and emulsifying properties of an exopolysaccharide produced by potential probiotic Leuconostoc citreum-BMS strain.

EPS-BMS, is to our knowledge, the first high molecular weight exopolysaccharide from potential probiotic Leuconostoc citreum-BMS strain that consists on a mixture of α-(1,6)-dextran branched at the third position and ß-(2,6)-levan. This sample exhibited interesting rheological and emulsifying properties under different conditions. Steady shear experiments proved that EPS-BMS had a pseudoplastic behavior without thixotropic properties. Interestingly, pseudoplasticity was maintained even under stress conditions of temperature, pH and salts, which could provide some sensory properties for food products such as mouth feel. Dynamic oscillatory measurements reflected a liquid-like behavior of the sample regardless of the studied EPS concentration, pH, temperature and ionic force. Results related to the emulsifying as well as interfacial properties showed that EPS-BMS had great potential to be applied as emulsifier and/or emulsion stabilizer in both neutral and acidic conditions. Based on the properties reported in this work, EPS-BMS could be potentially applied in the food industry.

Preparation of palm (Elaeis oleifera) pressed fibre cellulose nanocrystals via cation exchange resin: characterisation and evaluation as Pickering emulsifier.

BACKGROUND: Palm pressed fibre (PPF) is a cellulose-rich biomass residue produced during palm oil extraction. Its high cellulose content allows the isolation of cellulose nanocrystal (CNC). CNC has attracted scientific interest due to its biodegradability, biocompatibility and low cost. The present study isolated CNC from PPF using a cation exchange resin, which is an environmentally friendly and less harsh hydrolysis method than conventional mineral acid hydrolysis. Isolated CNC was used to stabilise an oil-in-water emulsion and the emulsion stability was evaluated in terms of droplet size, morphology and physical stability. RESULTS: PPF was subjected to alkali and bleach treatment prior to hydrolysis, which successfully removed 54% and 75% of non-cellulosic components (hemicellulose and lignin, respectively). Hydrolysis conditions of 5 h, 15:1 (w/w) resin-to-pulp ratio and 50 °C produced CNC particles of 50-100 nm in length. CNC had a crystallinity index of 42% and appeared rod-like morphologically. CNC-stabilised emulsion had better stability when used in combination with soy lecithin (SL), a well-established, commonly used food stabiliser. Emulsion stabilised by the binary mixture of CNC and SL had droplet size, morphology and physical stability comparable to those of emulsion stabilised using SL. CONCLUSIONS: CNC was successfully isolated from PPF through a cation exchange resin. This offers an alternative usage for the underutilised PPF to be converted into value-added products. Isolated CNC was also found to have promising potential in the stabilisation of Pickering emulsions. These results provide useful information indicating CNC as a natural and sustainable stabiliser for food, cosmeceutical and pharmaceutical applications. © 2021 Society of Chemical Industry.

Protein isolate from Stauntonia brachyanthera seed: Chemical characterization, functional properties, and emulsifying performance after heat treatment.

The seed of Stauntonia brachyanthera is usually regarded as waste after fructus processing. Here, the potential utilization value of the protein isolate (SSPI) from seeds was evaluated by investigating its physicochemical and functional properties. SSPI was a complex protein containing 7 distinct subunits that had high contents of most essential amino acids. The maximum foaming capacity of SSPI was 406.7 ± 41% at pH 9.0, and the water holding/oil adsorption capacities were 4.66 g/g and 9.06 g/g, respectively. SSPI aggregates with a particle size of 154.1 ± 5.2 nm was prepared after heat treatment, which was performed as a Pickering-like stabilizer for the structuring of water-in-oil-in-water emulsions. The outer droplet size of emulsions decreased as the aggregate concentration increased. Emulsion gels could be observed with the increasing aggregate concentration and oil fraction. Further study found that the stabilities of inner water-in-oil droplets and creaming were progressively increased by increasing the aggregate concentration during storage.

Behavior of concentrated emulsions prepared by acid-hydrolyzed insoluble microalgae proteins from Chlorella protothecoides.

BACKGROUND: Microalgae are a promising alternative source to meet the increasing global demand for protein. The insoluble microalgae protein fraction that makes up over half of the protein composition of the biomass has shown potential to serve as a functional emulsifier after acidic hydrolysis. However, creaming was observed due to the flocculation of emulsion droplets, suggesting a preferable use in concentrated emulsions. RESULTS: In this study, we examined the emulsifying behavior of the untreated insoluble microalgae protein fraction and two of its hydrolysates obtained in 0.5 mol L-1 HCl for 4 h at 65 °C (Hydrolysates 65) or 85 °C (Hydrolysates 85), at a concentration of 3% (w/w), and elevated levels of oil (50-70%). The results showed an increase in droplet size and apparent viscosity with increasing oil content in the emulsions. The emulsions made with Hydrolysates 85 had the smallest droplet size and the highest apparent viscosity. The gravitational separation was hindered when oil content was increased. The Hydrolysates 85 stabilized emulsions had a gel-like structure and were stable against coalescence or creaming during a 7 day storage test. CONCLUSION: The results suggest that the thermal acid-treated fraction Hydrolysates 85 may, in particular, be a good emulsifier to formulate concentrated emulsion-based foods with oil content over 50%, such as mayonnaise, salad dressings, or dips. © 2020 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Structural elucidation and interfacial properties of a levan isolated from Bacillus mojavensis.

A strain with high exopolysaccharide (EPS) production was isolated from soil and identified as Bacillus mojavensis based on the 16S rRNA gene sequencing and biochemical properties. The EPS produced simultaneously with the growth phase reached a maximum of 22 g/L after attaining a stationary phase with sucrose used as sole carbon source. B. mojavensis EPS (BM-EPS) was recovered, fractionated by ethanol precipitation and analysed by NMR and methylation analyses. The BM-EPS was found to be composed of (ß2 â†’ 6)-Fruf residues, characteristic of a levan, with an average molecular weight of 2.3 MDa. A homogeneous micro-porous and rough structure matrix was observed by SEM of the freeze-dried powdered sample. A concentration-dependent water-soluble nature was observed, with good water (5.3 g/g) and oil (36 g/g) holding capacities. The levan displayed good emulsification activity with excellent stability against food grade oil, thus favoring it as a promising emulsifying agent to food industries.

Characterization and emulsifying properties of aquatic lecithins isolated from processing discard of rainbow trout fish and its eggs.

This study investigates the characterization and emulsifying properties of different type lecithins. Emulsifying properties of lecithins isolated from rainbow trout egg (RL) and trout processing discard (WL) were compared with the soybean (SL) and hen egg yolk (HL) lecithin in sunflower-fish oil O/W emulsion systems. The phospholipid contents of RL and WL were significantly higher than those of HL and SL. The higher phospholipid contents in RL and WL resulted in lower droplet size (18.3-20.5 µm), higher viscosity (2.37-2.51 mPa.s) and higher physical stability (78.11-75.33) of emulsions. The linoleic acid (C18:2) was the most abundant PUFA in terrestrial origin lecithins (HL and SL), whereas DHA and EPA, a valuable omega-3 fatty acid, were the major PUFAs in aquatic origin lecithins (RL and WL). RL and WL formed more stable emulsions than HL and SL. This study provides valuable information for utilization of RL and HL as emulsifier in emulsion systems.

Effect of ultrasound-assisted extraction on the structure and emulsifying properties of peanut protein isolate.

BACKGROUND: With an increasing demand for edible protein, research on new extraction methods is attracting more attention. The effects of such methods on functional properties are important. The present study aimed to evaluate the effect of ultrasound-assisted extraction on the extraction efficiency, structure, and the emulsifying properties of peanut protein isolate (PPI). RESULTS: Ultrasound-assisted extraction significantly improved extraction efficiency and shortened the processing time. The nanostructure, molecular weight distribution, and particle size of PPI were altered by ultrasound-assisted extraction. The emulsifying properties of the PPI from ultrasound-assisted extraction were significantly improved compared with alkaline extraction. Peanut protein isolate had lower molecular weight fractions, higher levels of hydrophobic amino acids, and the highest fluorescence intensity with ultrasound intensity, temperature, and time of 3.17 W cm-3 , 35 °C, and 30 min, respectively. These contributed to the higher emulsifying activity index and emulsifying stability index of the PPI emulsions. The uniform distribution of droplets and smaller particle size of the PPI emulsions was also observed. CONCLUSION: The results suggested that ultrasound can be used to induce the conformational changes to modify the interfacial association between protein-oil phases, thereby improving the emulsifying properties of peanut protein. © 2020 Society of Chemical Industry.

Health Beneficial Food Emulsifier Produced from Fishery Byproducts.

The bioavailability of DHA-bound phospholipids, especially the DHA-bound lysophospholipid (DHA-LPL) could be considered the most effective DHA chemical forms for DHA accretion in the brain. Such a DHA-LPL should also have very high emulsifying stability performance based on its analogy with conventional soy LPL. Therefore, in this study, we describe two fishery byproducts, rich in DHA-bound phospholipids, to derive DHA-LPL via sn-1 positional specific lipase partial hydrolysis of the phospholipids. Through this reaction, the DHA composition increased to 43.8 % from 29.1 % in the salmon head phospholipid-derived DHA-LPL, and to 84.0 % from 47.4 % in the squid meal phospholipid-derived DHA-LPL. In fact, these obtained DHA-LPLs exhibited far higher emulsifying stability than the conventional food emulsifiers in the market. For example, the prepared high-purity squid meal phospholipid-derived LPL sustained an emulsion form for a week even under 80°C. Thus, food emulsifiers produced from fishery byproducts are considered to exhibit very high values of both in a sense of outstandingly high health benefits and sustaining emulsions even under very high temperatures.

Production, partial purification and characterization of a proteoglycan bioemulsifier from an oleaginous yeast.

In this study, Meyerozyma caribbica, an indigenously isolated oleaginous yeast, produced in media containing glucose a bioemulsifier that was partially characterized as a proteoglycan based on preliminary analysis. Optimization of carbon:nitrogen (C:N) ratio revealed 30:1 as the suitable ratio for enhanced production. Apart from higher emulsification activity (E24: 70-80%), this molecule showed strong emulsion stability over a wide range of pH (2.0-9.0), salinity (0.05%-10%, w/v) and temperature (- 80 °C to + 50 °C). The current study emphasizes on the determination of critical media parameters for improved and stable bioemulsifier production coupled with partial characterization and identification of the molecule. Thus, a proteoglycan-based bioemulsifier with such a stable emulsifying property can serve as a versatile and potential component in food, cosmetics and pharmaceutical formulations.

Characterization and analysis of an oil-in-water emulsion stabilized by rapeseed protein isolate under pH and ionic stress.

BACKGROUND: Presently, identifying natural compounds as emulsifiers is a popular topic in the food industry. Rapeseed protein isolate (RPI) is a natural plant protein with excellent emulsifying properties, but it has not been systematically developed and utilized. RESULTS: This study investigated the surface hydrophobicity, wettability, and protein solubility of RPI to further explain its emulsifying behavior in emulsion systems. Nanoemulsions stabilized by RPI at varying protein concentration, pH, and ionic strength were prepared. The size distribution, zeta potential, flocculation index, creaming index, microstructure, rheology, and protein secondary structure of emulsions were measured. The emulsion stabilized by 20 g L-1 RPI at pH 10.0, 200 mmol L-1 ionic strength revealed an appropriate droplet size of 555 nm and the most internal gel strength without creaming phenomenon. Circular dichroism spectroscopy showed a positive correlation between emulsion stability and α-helix ratio, indicating the environment factors affected emulsion stability by acting on its hydrogen bonds. CONCLUSIONS: This study demonstrates that RPI is a practical emulsifier for stabilizing nanoemulsions. About 20 g L-1 RPI can stabilize 100 mL L-1 oil in water; stable emulsions can be formed at most pH conditions (except 7.0); ion addition will aggravate the emulsion flocculation, but also increase the internal gel strength. © 2020 Society of Chemical Industry.

Extraction and biological activity of exopolysaccharide produced by Leuconostoc mesenteroides SN-8.

An exopolysaccharide (EPS)-producing strain SN-8 isolated from Dajiang was identified as Leuconostoc mesenteroides. When sucrose was used as the carbon source for fermentation, the output of EPS was 2.42 g/L. High performance liquid chromatography analysis confirmed the presence of monomers such as glucan and mannose. The molecular weight detection value is 2.0 × 105 Da. Fourier transform infrared spectroscopy displayed the EPS had the basic skeleton and functional groups of a typical polysaccharide structure. Scanning electron microscopy showed smooth surfaces and compact structure. Thermal performance analysis showed that the highest heat resistance temperature of the EPS was 80 °C. Compared with vitamin C, its hydroxyl radical scavenging rate was as high as 32% and 1,1-diphenyl-2-picrylhydrazyl scavenging rate was as high as 40% under the same concentration. The peanut oil was the most emulsifiable at a concentration of 1.5 mg/mL, and the emulsification index was 0.55. These results might show that the EPS had high application value.

Preparation of a novel emulsifier by self-assembling of proanthocyanidins from Chinese bayberry (Myrica rubra Sieb. et Zucc.) leaves with gelatin.

A physicochemically stable emulsion was developed by using a novel emulsifier, which was self-assembled colloidal complex of gelatin (GLT) and proanthocyanidins from Chinese bayberry (Myrica rubra Sieb et Zucc.) leaves (BLPs), with epigallocatechin-3-O-gallate (EGCG) as structure units. The GLT-BLP colloidal complexes were spherically shaped by transmission electron microscope (TEM). The data of Fourier transform infrared spectrum (FTIR), circular dichroism (CD), isothermal titration calorimetry (ITC) revealed that the main binding force between GLT and BLPs of the colloidal complexes was hydrogen bond. The incorporation of BLPs to GLT provided GLT with stronger affinity at oil-water interface and thus enhanced the physical stability of GLT-stabilizing emulsion. In addition, the emulsions stabilized by the colloidal complexes showed higher oxidation stability than that stabilized by free GLT only. The novel emulsifier developed in this study have potential applications as functional emulsifiers in food-grade emulsions with high anti-oxidation activity.

Optimization of Pectin Extraction from Sweet Potato Peels Using Citric Acid and its Emulsifying Properties.

BACKGROUND: Pectin is a natural polysaccharide that has been used widely as a stabilizer in food emulsion system. OBJECTIVE: This study aimed to optimize the yield of pectin extracted from sweet potato residue and investigate its emulsifying properties. METHODS: Response surface methodology (RSM) has been utilized to investigate the pectin extracted from sweet potato peels using citric acid as the extracting solvent. Investigation of the effect of different extraction conditions namely temperature (°C), time (min) and solution pH on pectin yield (%) were conducted. A Box-Benhken design with three levels of variation was used to optimize the extraction conditions. RESULTS: The optimal conditions determined were temperature 76°C, time 64 min and pH 1.2 with 65.2% yield of pectin. The degree of esterification (DE) of the sweet potato pectin was determined using Fourier Transform Infrared (FTIR) Spectroscopy. The pectin is high-methoxyl pectin with DE of 58.5%. Emulsifying properties of sweet potato pectin were investigated by measuring the zeta-potential, particle size and creaming index with addition of 0.4 and 1.0 wt % pectin to the emulsion. CONCLUSION: Extraction using citric acid could improve the pectin yield. Improved emulsion stability was observed with the addition of the sweet potato pectin.

Recent advances in extracting pectin by single and combined ultrasound techniques: A review of techno-functional and bioactive health-promoting aspects.

Ultrasonication is an emerging nonthermal process to extract pectins and pectic-polysaccharides from natural sources. This review aimed to highlight recent results of techno-functional (e.g., water and oil holding capacities, foaming capacity and stability, emulsifying activity, emulsion stability, rheological and pasting properties, and tin corrosion inhibitory activity) and biofunctional (e.g., antioxidant, antiradical, antiglycation, anticoagulant, antitumor, anti-inflammatory, immunostimulatory, and analgesic activities) properties of pectins extracted using both single and combined sonication modes. Integrating the ultrasound with other techniques (e.g., microwave heating and enzymatic digestion) can significantly increase the cell disruption, better penetration, and mass transfer of pectins at a shorter time. The ultrasound-microwave (UMAE) and ultrasound-enzyme (UEAE) assisted extraction systems compared to the ultrasound-assisted extraction (UAE) can more improve the techno-functional quality of pectins and their body's healing capacity to accomplish optimum health and functioning. The current opportunities and promising perspectives are also presented to enhance the pectin bioavailability in clinical studies.

Structural characterization and functional evaluation of a novel exopolysaccharide from the moderate halophile Gracilibacillus sp. SCU50.

A novel exopolysaccharide (named mhEPS) with a molecular weight of 5.881 × 104 g/mol was isolated from Gracilibacillus sp. SCU50's high-salt fermentation broth by ethanol precipitation, anion-exchange and gel-filtration chromatography before being structurally characterized and functionally evaluated. mhEPS consists of mannose, galactose, glucose and fucose in a molar ratio of 90.81:5.76:2.22:1.21. The backbone of mhEPS was (1→3,6)-linked α-D-mannopyranose residues, branched by single α-D-mannopyranose units attached to the main chain at C-2 position of every residue. The water solubility index, water holding capacity and oil holding capacity of mhEPS were 93.53, 14.89 and 1023.34%, respectively. mhEPS showed to possess good emulsifying activity against all tested substrates, and it could potentially increase the high-salinity tolerance of strain SCU50. The lack of toxicity of mhEPS was also preliminarily determined. Due to the functional properties of mhEPS, it is a good candidate to develop as an active ingredient in food, cosmetics and detergents.

Biorefining and the Functional Properties of Proteins from Lipid and Pigment Extract Residue of Chlorella pyrenoidosa.

Microalgae are considered as excellent candidates for bioactive compounds, yet microalgal residues remaining after the extraction of one or two compounds are usually discarded, which is not economical. This study demonstrates the alkaline extraction of proteins from Chlorella pyrenoidosa residue after lipid and pigment extractions, and their functional properties. Single-factor experiments and response surface methodology were used to obtain the optimal conditions for protein extraction. Based on our results, a maximum protein yield of 722.70 mg/g, was obtained under the following extraction conditions: sodium hydroxide concentration 7.90%, extraction temperature 70.00 °C, extraction time 34.80 min, and microalgal residue concentration 8.20 mg/mL. The molecular weight of microalgal residue protein isolate (MRPI) was mainly distributed at the regions of 0.18-0.50 kDa, 0.50-1.50 kDa, and 1.50-5.00 kDa. The essential amino acid content was greater than the values recommended by FAO/WHO standards; a high essential amino acid index value (1.49) was another good indication that MRPI is suitable for human consumption. Moreover, MRPI exhibited excellent emulsifying properties and antioxidant activity, which suggests it may be useful as an emulsifying agent and antioxidant. These findings could improve the extraction methods of functional protein from microalgal residue and add value to microalgae-based bioactive compound production processes.

Production and properties of a bioemulsifier obtained from a lactic acid bacterium.

In the present work, the production of bioemulsifier (BE) by a lactic acid bacterium (LAB) grown at 25 °C in lactic whey-based media for 24 h was evaluated. Maximum production was detected in a medium containing yeast extract, peptone and lactic whey (LAPLW medium), with a yield of 270 mg L-1. The BE proved to be more innocuous for Caco-2 cells, used as a toxicological indicator, than the non-ionic surfactant Triton X-100. In addition, the microbial product presented higher stability to changes in temperature (37 °C to 100 °C), pH (2-10), and salt concentration (5% and 20%, w/v) than the synthetic surfactant. Regarding emulsifying capacity tested against different hydrophobic substrates (kerosene, motor oil, diesel, sunflower oil, and grape oil), the BE displayed E24 values similar to or even better than those of Triton X-100. Finally, Triton X-100 caused irreversible modifications on the giant unilamellar vesicles (used as model membrane system), promoting the solubilization of the lipid bilayers. Nevertheless, BE induced temporary modifications of the membrane, which is associated with incorporation of the bioproduct in the outer layer. These results demonstrate the role of BE in biological processes, including reversible changes in microbial membranes to enhance the access to hydrophobic substrates.