Formulation strategies to improve the efficacy of intestinal permeation enhancers.

The use of chemical permeation enhancers (PEs) is the most widely tested approach to improve oral absorption of low permeability active agents, as represented by peptides. Several hundred PEs increase intestinal permeability in preclinical bioassays, yet few have progressed to clinical testing and, of those, only incremental increases in oral bioavailability (BA) have been observed. Still, average BA values of ~1% were sufficient for two recent FDA approvals of semaglutide and octreotide oral formulations. PEs are typically screened in static in vitro and ex-vivo models where co-presentation of active agent and PE in high concentrations allows the PE to alter barrier integrity with sufficient contact time to promote flux across the intestinal epithelium. The capacity to maintain high concentrations of co-presented agents at the epithelium is not reached by standard oral dosage forms in the upper GI tract in vivo due to dilution, interference from luminal components, fast intestinal transit, and possible absorption of the PE per se. The PE-based formulations that have been assessed in clinical trials in either immediate-release or enteric-coated solid dosage forms produce low and variable oral BA due to these uncontrollable physiological factors. For PEs to appreciably increase intestinal permeability from oral dosage forms in vivo, strategies must facilitate co-presentation of PE and active agent at the epithelium for a sustained period at the required concentrations. Focusing on peptides as examples of a macromolecule class, we review physiological impediments to optimal luminal presentation, discuss the efficacy of current PE-based oral dosage forms, and suggest strategies that might be used to improve them.

Influence of Plasdone™ S630 Ultra-an Improved Copovidone on the Processability and Oxidative Degradation of Quetiapine Fumarate Amorphous Solid Dispersions Prepared via Hot-Melt Extrusion Technique.

In a formulation, traces of peroxides in copovidone can impact the stability of drug substances that are prone to oxidation. The present study aimed to investigate the impact of peroxides in novel Plasdone™ S630 Ultra and compare it with regular Plasdone™ S630 on the oxidative degradation of quetiapine fumarate amorphous solid dispersions prepared via hot-melt extrusion technique. The miscibility of copovidones with drug was determined using the Hansen solubility parameter, and the results indicated a miscible drug-polymer system. Melt viscosity as a function of temperature was determined for the drug-polymer physical mixture to identify the suitable hot-melt extrusion processing temperature. The binary drug and polymer (30:70 weight ratio) amorphous solid dispersions were prepared at a processing temperature of 160°C. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies of amorphous solid dispersions revealed the formation of a single-phase amorphous system with intermolecular hydrogen bonding between the drug and polymer. The milled extrudates were compressed into tablets by using extragranular components and evaluated for tabletability. Stability studies of the milled extrudates and tablet formulations were performed to monitor the oxidative degradation impurity (N-oxide). The N-oxide impurity levels in the quetiapine fumarate - Plasdone™ S630 Ultra milled extrudates and tablet formulations were reduced by 2- and 3-folds, respectively, compared to those in quetiapine fumarate - Plasdone™ S630. The reduced oxidative degradation and improved hot-melt extrusion processability of Plasdone™ S630 Ultra make it a better choice for oxidation-labile drugs over Plasdone™ S630 copovidone.

Immediate-Release Formulations Produced via Twin-Screw Melt Granulation: Systematic Evaluation of the Addition of Disintegrants.

The current study evaluated the effect of location and amount of various superdisintegrants on the properties of tablets made by twin-screw melt granulation (TSMG). Sodium-croscarmellose (CCS), crospovidone (CPV), and sodium starch glycolate (SSG) were used in various proportions intra- and extra-granular. Tabletability, compactibility, compressibility as well as friability, disintegration, and dissolution performance were assessed. The extra-granular addition resulted in the fasted disintegration and dissolution. CPV performed superior to CCS and SSG. Even if the solid fraction (SF) of the granules was lower for CPV, only a minor decrease in tabletability was observed, due to the high plastic deformation of the melt granules. The intra-granular addition of CPV resulted in a more prolonged dissolution profile, which could be correlated to a loss in porosity during tableting. The 100% intra-granular addition of the CPV resulted in a distinct decrease of the disintegration efficiency, whereas the performance of SSG was unaffected by the granulation process. CCS was not suitable to be used for the production of an immediate-release formulation, when added in total proportion into the granulation phase, but its efficiency was less impaired compared to CPV. Shortest disintegration (78 s) and dissolution (Q80: 4.2 min) was achieved with CPV extra-granular. Using CPV and CCS intra-granular resulted in increased disintegration time and Q80. However, at a higher level of appx. 500 s and appx. 15 min, only SSG showed a process and location independent disintegration and dissolution performance.

Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm.

AIM: Canagliflozin (CFZ), a novel SGLT II antagonist, exhibits erratic absorption after oral administration. The current study entails development and evaluation of spray dried lipid based formulation (solid SMEDDS) for enhancing oral bioavailability and anti-diabetic activity of CFZ. METHODS: Solid SMEDDS developed through spray drying containing Neusilin US2 as an adsorbent. The formed solid SMEDDS were characterized for physicochemical and solid state attributes. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to confirm the spherical morphology. In vitro dissolution, ex vivo permeability and in vivo pharmacokinetic studies were conducted to determine the release rate, permeation rate and absorption profile of CFZ, respectively. Pharmacodynamic studies were done as per standard protocols. RESULTS: The optimized solid SMEDDS exhibited acceptable practical yield and flow properties and is vouched with enhanced amorphization, nanoparticulate distribution and acceptable drug content. The spherical morphology of solid SMEDDS and reconstituted SMEDDS were confirmed in SEM and TEM, respectively. In vitro dissolution studies revealed multi-fold release behavior in CFZ in various dissolution media, whereas, remarkable permeability was observed in jejunum segment of rat intestine. Pharmacokinetic studies of CFZ in solid SMEDDS demonstrated 2.53 and 1.43 fold enhancement in Cmax and 2.73 and 1.98 fold in AUC 0-24h, as compared to pure API and marketed formulation, respectively. Pharmacological evaluation of solid SMEDDS revealed enhanced anti-diabetic activity of CFZ through predominant SGLT II inhibition in rats, as evident from evaluation of biochemical levels, urinary glucose excretion studies and SGLT II expression analysis. CONCLUSION: The current work describes significant improvement biopharmaceutical properties of CFZ in solid SMEDD formulation. Graphical abstract Graphical Abstract: Enhanced oral bioavailability and anti-diabetic activity of canagliflozin through a spray dried lipid based oral delivery: a novel paradigm.

Poly(2-Ethyl-2-Oxazoline) as an Alternative to Poly(Vinylpyrrolidone) in Solid Dispersions for Solubility and Dissolution Rate Enhancement of Drugs.

Poly(2-ethyl-2-oxazoline) (PEOX), a biocompatible polymer considered as pseudopolypeptide, was introduced as a potential alternative to the commonly used polymer, poly(vinylpyrrolidone) (PVP) for the preparation of solid dispersion with a poorly soluble drug. Glipizide (GPZ), a Biopharmaceutical Classification System class II model drug, was selected for solubility and dissolution rate study. GPZ-polymer solid dispersions and physical mixtures were characterized and investigated by X-ray diffractometry, differential scanning calorimetry, scanning electron microscopy, and FTIR spectroscopy. The impact of polymers on crystal nucleation kinetics was studied, and PEOX exhibited strong inhibitory effect compared with PVP. Solubility and dissolution behavior of the prepared solid dispersions and their physical blends were in vitro examined and evaluated. A significant enhancement in GPZ solubility was obtained with PEOX compared with the pure drug and solid dispersion with PVP. A big improvement in the intrinsic dissolution rate (45 times) and dissolved amount of GPZ (58 times) was achieved with PEOX in fasted state simulated intestinal fluid, against comparable enhancement observed with PEOX and PVP in phosphate buffer at pH 6.8. Lower molecular weight of PEOX-5K (5000 g/mol) was found to be superior to higher molecular weight PEOX-50K (50,000 g/mol) in the improvement of dissolution behavior. The findings of this study with GPZ as a model drug introduce lower molecular weight PEOX as a promising polymeric carrier toward better oral bioavailability of poorly soluble drugs.

Evaluation of Spironolactone Solid Dispersions Prepared by Co-Spray Drying With Soluplus® and Polyvinylpyrrolidone and Influence of Tableting on Drug Release.

Solid dispersions of spironolactone with Soluplus® and polyvinylpyrrolidone were prepared by spray drying according to a mixture experimental design and evaluated for moisture content, particle size, drug solubility, crystallinity (powder X-ray diffraction and differential scanning calorimetry), and physicochemical interactions (Fourier-transform infrared spectroscopy, Raman). In vitro dissolution was evaluated for the spray dried product itself and after compression into tablets, and prediction models were derived using multiple linear regression analysis. The spray dried products consisted of amorphous drug, indicated by the absence of crystalline powder X-ray diffraction peaks. Amorphization and interactions impacted changes in the Fourier-transform infrared spectroscopy spectra in the ranges 2900-3000 cm-1 (C-H) and 1600-1800 cm-1 (C=O) and caused merging at 1690 cm-1 (C=O of lactone) and 1670 cm-1 (C=O of thioacetyl group). In the Raman spectra, amorphization and interactions resulted in disappearance of peak at 1690 cm-1 (C=O) and merging of peaks at 582 and 600 cm-1 (C-S). Hydrogen bonding between the thioacetyl group of the drug with the hydroxyl groups of Soluplus® caused marked suppression of the peak at 1190 cm-1 (R-C(=O)-S vibration). Amorphization and interactions resulted in improved solubility and dissolution which was greatest for drug/Soluplus® ratio 1:4 and was also demonstrated in the corresponding tablets.

Torsemide Fast Dissolving Tablets: Development, Optimization Using Box-Bhenken Design and Response Surface Methodology, In Vitro Characterization, and Pharmacokinetic Assessment.

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y1), percentage friability (Y2), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC0-12) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

Experimental Design for Determination of Effects of Superdisintegrant Combinations on Liquisolid System Properties.

The preparation of liquisolid systems presents a promising and innovative possibility for enhancing dissolution profiles and improving the bioavailability of poorly soluble drugs. This study aims to evaluate the differences in the properties of liquisolid systems containing combinations of 3 commercially used superdisintegrants (sodium starch glycolate, crospovidone, and croscarmellose sodium). Multiple regression models and contour plots were used to study how the amount and the type of superdisintegrant used affected the quality parameters of liquisolid tablets. The results revealed that an increased amount of crospovidone in the mixture improves disintegration and wetting time and enhances drug release from the prepared liquisolid tablets. Moreover, it was observed that a binary blend of crospovidone and sodium starch glycolate improved tablet disintegration. Considering the obtained results, it could be stated that crospovidone showed the best properties to be used as superdisintegrant for the preparation of liquisolid systems containing rosuvastatin.

Oral subchronic exposure to silver nanoparticles in rats.

Because of their extremely small size, silver nanoparticles (AgNPs) show unique physical and chemical properties, with specific biological effects, which make them particularly attractive for being used in a number of consumer applications. However, these properties also influence the potential toxicity of AgNPs. In this study, we assessed the potential toxic effects of an in vivo oral sub-chronic exposure to polyvinyl pyrrolidone coated AgNPs (PVP-AgNPs) in adult male rats. We also assessed if oral PVP-AgNPs exposure could alter the levels of various metals (Fe, Mg, Zn and Cu) in tissues. Rats were orally given 0, 50, 100 and 200 mg/kg/day of PVP-AgNPs. Silver (Ag) accumulation in tissues, Ag excretion, biochemical and hematological parameters, metal levels, as well as histopathological changes and subcellular distribution following PVP-AgNPs exposure, were also investigated. After 90 days of treatment, AgNPs were found within hepatic and ileum cells. The major tissue concentration of Ag was found in ileum of treated animals. However, all tissues of PVP-AgNPs-exposed animals showed increased levels of Ag in comparison with those of rats in the control group. No harmful effects in liver and kidney, as well as in biochemical markers were noted at any treatment dose. In addition, no hematological or histopathological changes were found in treated animals. However, significant differences in Cu and Zn levels were found in thymus and brain of PVP-AgNPs-treated rats.

In vivo mucoadhesive strength appraisal of gum Manilkara zapota

The mucilage (MMZ) extracted from the seeds of Manilkara zapota(Linn.) P. Royen syn. using maceration techniques was evaluated for mucoadhesive strength by various in vitro and in vivo methods. The result showed that mucoadhesive strength of seeds mucilage have comparable property toward natural and synthetic polymers such as Guar Gum and hydroxyl propyl methyl cellulose (HPMC E5LV) under the experimental conditions used in this study. Briefly, it could be concluded that the seed mucilage of Manilkara zapota can be used as a pharmaceutical excipient in oral mucoadhesive drug delivery systems. Further, it may be appropriate to study the changes in these properties after chemical modifications.

Mucilagem (MMZ) extraída das sementes de Manilkara zapota(Linn.) P. Royen syn utilizando técnicas de maceração foi avaliada por sua força mucoadesiva por vários métodos in vitro e in vivo. O resultado mostrou que a força mucoadesiva das sementes mucilaginosas tem propriedade comparável aos polímeros naturais e sintéticos, tais como goma Guar e hidroxipropilmetil celulose (HPMC E5LV) nas condições experimentais utilizadas neste estudo. Brevemente, se pode concluir que a mucilagem de semente de Manilkara zapota pode ser usada como um excipiente farmacêutico em sistemas de liberação de fármacos mucoadesivos por via oral. Pode ser apropriado o estudo posterior de mudanças nessas propriedades após modificações químicas.

A novel solid dispersion system for natural product-loaded medicine: silymarin-loaded solid dispersion with enhanced oral bioavailability and hepatoprotective activity.

A surface-attached silymarin-loaded solid dispersion with improved dissolution profile and enhanced oral bioavailability was formulated using silymarin, polyvinylpyrrolidone (PVP) and Tween 80 in water. In this solid dispersion, hydrophilic PVP was adhered onto the surface of crystalline drug rendering silymarin hydrophilic without changing its crystallinity. The drug solubility from the optimised solid dispersion prepared with silymarin/PVP/Tween 80 at the weight ratio of 5/2.5/2.5 increased by almost 650-fold compared to drug powder. The drug was physically and chemically stable in the solid dispersion for at least 6 months. Moreover, the solid dispersion enhanced the oral bioavailability of the drug in rats by almost 3-fold compared to the commercial product. The silymarin-loaded solid dispersion also exhibited advanced hepatoprotective bioactivity against CCl4-induced liver damage compared to silymarin or the commercial product. Thus, this silymarin-loaded solid dispersion would be useful for the enhancement of oral bioavailability and hepatoprotective activity of poorly water-soluble silymarin.

Mechanochemical solid-state polymerization (XI): effect of water-insoluble pharmaceutical aids on drug release from mechanically synthesized polymeric prodrugs.

We discuss here the effect of water-insoluble pharmaceutical aids on the nature of drug release from composite polymeric prodrugs synthesized by mechanochemical solid-state polymerization. Magnesium stearate (Mgst) and hydrogen castor oil (HCO) were used as water-insoluble pharmaceutical aids. Composite polymeric prodrugs were synthesized by the mechanochemical solid-state polymerization of a vinyl monomer of 5-fluorouracil (I) in the presence of Mgst or HCO. The molecular weight of the resulting polymeric prodrugs increased with increasing the content of Mgst or HCO. Prodrug hydrolysis was carried out in a heterogeneous system in phosphate buffer at pH 6.8 and 37 degrees C. The rate of drug release from the composite polymeric prodrug containing Mgst (Poly-Mgst) was faster than that from polymeric prodrug containing no pharmaceutical aids (Poly-Non), while hydrolysis of the composite polymeric prodrug containing HCO (Poly-HCO) was slower than Poly-Non. Scanning electron microscope (SEM) photos showed the surface of Poly-HCO was smoother than that of Poly-Non and Poly-Mgst. It was suggested that the slower drug release from Poly-HCO may be responsible for the smaller specific surface area than that of Poly-Non. It was also shown that the rate of drug release from the composite polymeric prodrugs decreases with increasing the content of Mgst or HCO. Hence, novel composite polymeric prodrugs with a variety of drug release rates can be prepared by mechanochemical solid-state polymerization in a totally dry process.

Solubility of guaifenesin in the presence of common pharmaceutical additives.

The aqueous solubility of guaifenesin, a highly water-soluble drug, in the presence of salts, sugars, and cosolvents was determined at 25 degrees C and 40 degrees C. The solubility of drug at both temperatures was reduced with increasing concentrations of salts and sugars. The extent of reduction in drug solubility was dependent on the type of salts and sugars used. The salting-out coefficient of additives was calculated by plotting log-linear solubility profiles of the drug against the concentrations of the additives. The solubility of guaifenesin, a neutral compound, was found to be higher at lower pH values, which could be due to hydrogen-bonding effects. At 25 degrees C, glycerin, PEG 300, and propylene glycol increased the solubility of drug at low solvent concentrations while the solubility was reduced at high concentrations. At 40 degrees C, the solubility of drug was reduced at all concentrations of cosolvents. The thermodynamic events accompanying the solubility process were discussed to explain the solubility phenomena observed in the presence of additives. The reduced aqueous solubility of guaifenesin in the presence of additives greatly improved the entrapment of drug into controlled-release wax microspheres.

Effect of excipients on the stability and transport of recombinant human epidermal growth factor (rhEGF) across Caco-2 cell monolayers.

The effect of sixteen excipients on the transport of recombinant human epidermal growth factor (rhEGF) across Caco-2 cell monolayers was examined at 37 degrees C. The apparent apical to basolateral (A-B) permeability (Papp) of 30 microM rhEGF was 8.15 x 10(-7) cm/sec, indicative of a poor level of absorption in the GI tract. The Papp was 1.7- and 6.3-fold greater than the Papp in the basolateral to apical (B-A) direction and the A-B permeability of mannitol, respectively, and decreased dramatically to a negligible level at 4 degrees C, consistent with a receptor mediated transcytosis of rhEGF. The stability of rhEGF was very poor, undergoing more than 85% degradation in 2 h in the transport medium at 37 degrees C. A significant increase in the Papp could be achieved by the addition of certain excipients, as exemplified by 23, 21, 20 and 16-fold increases, in the presence of sodium taurochenodeoxycholate (NaTCDC), sodium taurodeoxycholate (NaTDC), sodium glycodeoxycholate (NaGDC) and sodium laurylsulfate (SLS) (all at a concentration of 1% w/v), respectively. A significant increase in stability could also be achieved by the addition of some of the excipients, as represented by 1% SLS, which nearly completely stabilized the rhEGF. Unfortunately, however, an increase in the Papp of rhEGF could not be achieved without a simultaneous and extensive decrease in the integrity of the cell membranes. Thus, more efficient excipients, that specifically enhance the permeation of rhEGF and do not alter the membrane integrity, should be pursued in order to safely enhance the permeation of rhEGF.

Investigations on the drug releasing mechanism from an asymmetric membrane-coated capsule with an in situ formed delivery orifice.

Asymmetric membrane-coated capsules with in situ formation of a delivery orifice were examined for their improved osmotic effects. The release mechanisms were investigated for drugs with both moderate to high water solubility and those with poor water solubility. The capsule wall membrane was produced by a phase-inversion process, in which an asymmetric membrane was formed on stainless steel mold pins by dipping the mold pins into a coating solution containing a polymeric material followed by dipping into a quenching solution. In situ formation of a delivery orifice in the thin membrane was proven by visualization of a jet stream of chlorophyll being released from the capsule. The release mechanism for drugs with moderate to high water solubility was mainly controlled by the osmotic effect, which is a function of the drug's solubility. Permeability across the asymmetric membrane of the capsule was determined to be 4.28 x 10(-6) cm(2)/h-atm at 37 degrees C for drugs with water solubilities in a moderate to high range. Accordingly, the poorly water-soluble drug, nifedipine, was unable to create enough of an osmotic effect to activate drug release. Solubilization either by the addition of the solubility enhancer, SLS, or by a solid dispersion with HPMC could increase the solubility of nifedipine to a sufficient extent to activate drug release. It was found that the suspending ability induced by the viscous nature of HPMC further interacted with SLS to synergistically increase the maximal percent release and the release rate of nifedipine. The osmotic effect of this suspension ability was proposed as the underlying mechanism responsible for the release of poorly water-soluble drugs, i.e. nifedipine, from this system.

Effect of additives on the crystallization and the permeation of ketoprofen from adhesive matrix.

The crystallization of drug in a matrix may significantly affect the efficacy and quality of the transdermal drug delivery system. Therefore, the control of drug crystallization is of particular interest in the development of efficient transdermal delivery systems. In this study, we investigated the effects of various additives on the crystallization of ketoprofen in polyisobutylene (PIB) adhesive matrix. The effects of various additives on the permeation of ketoprofen from PIB matrix across hairless mouse skin were also examined. Poly(vinyl pyrrolidone) (PVP) K-30 was found to be the most effective crystallization inhibitor. Also, Poloxamer, Tween 80 and Labrasol significantly inhibited the crystallization of ketoprofen in a PIB matrix. In case of Tween 80, Labrasol, and PVP K-30, the flux of ketoprofen decreased as the loading content of the additives increased. However, the addition of Tween 80, Labrasol, or PVP K-30 significantly reduced the decrease in the flux of ketoprofen within the PIB matrix during a storage time of 3 weeks.

An investigation of pulsatile release tablets with ethylcellulose and Eudragit L as film coating materials and cross-linked polyvinylpyrrolidone in the core tablets.

To develop new pulsatile release tablets, which can suppress drug release in stomach and release the drug rapidly after a predetermined lag time of about 3 h in intestine, the use of tablets with ethylcellulose/Eudragit L as a coating film and cross-linked polyvinylpyrrolidone in the core tablets was investigated. The release of diltiazem hydrochloride (DIL) as a model drug in the core tablets was investigated in vitro. The lag time (t10) was prolonged with an increase of the coating level, whereas the drug release rate was almost constant, irrespective of the coating level. The water-uptake study and electron microscope photographs suggested the mechanism of pulsatile release of drug. Pulsatile release tablets containing 60 mg DIL with 4.4 h of lag time (t10) in vitro were administrated to eight volunteers. The mean plasma concentration curves showed 4.9 h of lag time (tlag), 8.0 h of time to maximum concentration (tmax) and 3.1 h of time between tmax and tlag (t(psi)) in vivo. Relative bioavailability was 1.05 for pulsatile release tablets compared to conventional tablets.

Evaluation of the functional equivalence of crospovidone NF from different sources. II. Standard performance test.

Current NF monographs do not provide tests that reflect on the functionality of Crospovidone NF from multiple sources. Physical characterization studies such as particle size and distribution, surface area, porosity, and surface morphology revealed major differences among the crospovidones from different sources (Shah, U.; Augsburger, L.L. J. Pharm. Dev. Technol. 2001, 6 (1), 39-51). Differences in disintegration and dissolution were also observed for a model drug in an insoluble filler system (see Shah and Augsburger, 2001). The objective of this study was to determine the relationship between physical differences observed and disintegrant functionality and to develop standard performance test. Tests performed included settling volume studies, measurement of initial rate as well as extent of liquid uptake of the loose disintegrant powder, and simultaneous measurement of the axial and radial disintegrating forces along with the rate and extent of liquid uptake of the pure disintegrant compacts. Significant differences among the crospovidones were observed for all tests performed. Settling volume, liquid uptake, and disintegration force are recommended as standard performance tests to determine differences among crospovidones from different sources.

Statistical optimization of gastric floating system for oral controlled delivery of calcium.

The development of an optimized gastric floating drug delivery system is described. Statistical experimental design and data analysis using response surface methodology is also illustrated. A central, composite Box-Wilson design for the controlled release of calcium was used with 3 formulation variables: X1 (hydroxypropyl methylcellulose [HPMC] loading), X2 (citric acid loading), and X3 (magnesium stearate loading). Twenty formulations were prepared, and dissolution studies and floating kinetics were performed on these formulations. The dissolution data obtained were then fitted to the Power Law, and floating profiles were analyzed. Diffusion exponents obtained by Power Law were used as targeted response variables, and the constraints were placed on other response variables. All 3 formulation variables were found to be significant for the release properties (P <.05), while only HPMC loading was found to be significant for floating properties. Optimization of the formulations was achieved by applying the constrained optimization. The optimized formulation delivered calcium at the release rate of 40 mg/hr, with predicted n and T50% values at 0.93 and 3.29 hours, respectively. Experimentally, calcium was observed to release from the optimized formulation with n and T50% values of 0.89 (+/- 0.10) and 3.20 (+/- 0.21) hours, which showed an excellent agreement. The quadratic mathematical model developed could be used to further predict formulations with desirable release and floating properties.

Antitumor activity of tumor necrosis factor-alpha conjugated with polyvinylpyrrolidone on solid tumors in mice.

We attempted the development of a novel polymer conjugation to further improve the therapeutic potency of antitumor cytokines compared with PEGylation for clinical application. Compared with native tumor necrosis factor (TNF)-alpha in vitro, specific bioactivities of polyvinyl-pyrrolidone (PVP)-modified TNF-alphas (PVP-TNF-alphas) were decreased by increasing the degree of PVP attachment. PVP-TNF-alpha fraction 3, Mr 101,000, had the most effective antitumor activity of the various PVP-TNF-alphas in vivo. PVP-TNF-alpha fraction 3 had >200-fold higher antitumor effect than native TNF-alpha, and the antitumor activity of PVP-TNF-alpha fraction 3 was >2-fold higher than that of MPEG-TNF-alpha (Mr 108,000), which had the highest antitumor activity among the polyethylene glycol (PEG)-conjugated TNF-alphas. Additionally, a high dose of native TNF-alpha induced toxic side effects such as body weight reduction, piloerection. and tissue inflammation, whereas no side effects were observed after i.v. administration of PVP-TNF-alpha fraction 3. The plasma half-life of PVP-TNF-alpha fraction 3 (360 min) was about 80- and 3-fold longer than those of native TNF-alpha (4.6 mm) and MPEG-TNF-alpha (122 min), respectively. The mechanism of increased antitumor effect in vivo caused the prolongation of plasma half-life and increase in stability. These results suggested that PVP is a useful polymeric modifier for bioconjugation of TNF-alpha to increase its antitumor potency, and multifunctionally bioconjugated TNF-alpha may be a potentiated antitumor agent for clinical use.