Coupled exoskeleton assistance simplifies control and maintains metabolic benefits: A simulation study.

Assistive exoskeletons can reduce the metabolic cost of walking, and recent advances in exoskeleton device design and control have resulted in large metabolic savings. Most exoskeleton devices provide assistance at either the ankle or hip. Exoskeletons that assist multiple joints have the potential to provide greater metabolic savings, but can require many actuators and complicated controllers, making it difficult to design effective assistance. Coupled assistance, when two or more joints are assisted using one actuator or control signal, could reduce control dimensionality while retaining metabolic benefits. However, it is unknown which combinations of assisted joints are most promising and if there are negative consequences associated with coupled assistance. Since designing assistance with human experiments is expensive and time-consuming, we used musculoskeletal simulation to evaluate metabolic savings from multi-joint assistance and identify promising joint combinations. We generated 2D muscle-driven simulations of walking while simultaneously optimizing control strategies for simulated lower-limb exoskeleton assistive devices to minimize metabolic cost. Each device provided assistance either at a single joint or at multiple joints using massless, ideal actuators. To assess if control could be simplified for multi-joint exoskeletons, we simulated different control strategies in which the torque provided at each joint was either controlled independently or coupled between joints. We compared the predicted optimal torque profiles and changes in muscle and total metabolic power consumption across the single joint and multi-joint assistance strategies. We found multi-joint devices-whether independent or coupled-provided 50% greater metabolic savings than single joint devices. The coupled multi-joint devices were able to achieve most of the metabolic savings produced by independently-controlled multi-joint devices. Our results indicate that device designers could simplify multi-joint exoskeleton designs by reducing the number of torque control parameters through coupling, while still maintaining large reductions in metabolic cost.

Effects of two passive back-support exoskeletons on postural balance during quiet stance and functional limits of stability.

While occupational back-support exoskeletons (BSEs) are considered as potential workplace interventions, BSE use may compromise postural control. Thus, we investigated the effects of passive BSEs on postural balance during quiet upright stance and functional limits of stability. Twenty healthy adults completed trials of quiet upright stance with differing levels of difficulty (bipedal and unipedal stance; each with eyes open and closed), and executed maximal voluntary leans. Trials were done while wearing two different BSEs (SuitX™, Laevo™) and in a control (no-BSE) condition. BSE use significantly increased center-of-pressure (COP) median frequency and mean velocity during bipedal stance. In unipedal stance, using the Laevo™ was associated with a significant improvement in postural balance, especially among males, as indicated by smaller COP displacement and sway area, and a longer time to contact the stability boundary. BSE use may affect postural balance, through translation of the human + BSE center-of-mass, restricted motion, and added supportive torques. Furthermore, larger effects of BSEs on postural balance were evident among males. Future work should further investigate the gender-specificity of BSE effects on postural balance and consider the effects of BSEs on dynamic stability.

Meeting Proceedings for SCI 2020: Launching a Decade of Disruption in Spinal Cord Injury Research.

The spinal cord injury (SCI) research community has experienced great advances in discovery research, technology development, and promising clinical interventions in the past decade. To build upon these advances and maximize the benefit to persons with SCI, the National Institutes of Health (NIH) hosted a conference February 12-13, 2019 titled "SCI 2020: Launching a Decade of Disruption in Spinal Cord Injury Research." The purpose of the conference was to bring together a broad range of stakeholders, including researchers, clinicians and healthcare professionals, persons with SCI, industry partners, regulators, and funding agency representatives to break down existing communication silos. Invited speakers were asked to summarize the state of the science, assess areas of technological and community readiness, and build collaborations that could change the trajectory of research and clinical options for people with SCI. In this report, we summarize the state of the science in each of five key domains and identify the gaps in the scientific literature that need to be addressed to move the field forward.

Effects of walking distance over robot-assisted training on walking ability in chronic stroke patients.

An understanding of the dose-response during training is important to identify the rehabilitation programs to obtain the improvement in chronic stroke patients. The purpose of this study was to determine whether distance-dose (distance walked across all sessions) during robot-assisted training affects the change of walking speed and distance in chronic stroke patients after intervention. Fifteen chronic stroke patients were enrolled in this study. The patients performed 8 gait training sessions using the Hybrid Assistive Limb (HAL) for 3 weeks. Gait speed, stride length, cadence, and 2-minute walk test (2MWT) were measured before and post-intervention. Total walking distance (distance walked across all sessions) in individual patients were also measured. Gait speed, stride length, cadence, and 2-minute walk test (2MWT) improved significantly after training. The average of walking distance for 8 sessions in individual patients was 3793.3 ± 2105.3 m. Moreover, the change of gait speed (r = 0.53) and 2MWT (r = 0.70) were positively correlated with the walking distance during 8 sessions. This study of finding demonstrated that greater total distance walked over all sessions of training using the HAL is directly associated with the better walking outcomes in patients with chronic stroke. Further researches with a larger number of patients and a control group are needed to quantify the study results more precisely.

Effects of the degree of freedom and assistance characteristics of powered ankle-foot orthoses on gait stability.

We studied the use of powered ankle-foot orthoses (PAFOs) and walking stability of the wearers, focusing on the ankle joint, which is known to play a critical role in gait stability. Recognizing that the subtalar joint is an important modulator of walking stability, we conducted the walking experiment on a treadmill by applying varying assistance techniques to the 2-degree-of-freedom (DOF) PAFO, which has the subtalar joint as the rotating axis, and the commonly used 1-DOF PAFO. The participants were 8 healthy men (mean±SD: height, 174.8±7.1 cm; weight, 69.8±6.5 kg; and age, 29.1±4.8 years) with no history of gait abnormality. Center of pressure (COP) was measured with an in-shoe pressure sensor, and stability was estimated on the basis of the angular acceleration measured with the inertial measurement unit attached to the trunk. The experimental results of the 2-DOF PAFO, with or without assistance, showed a significantly higher stability than those of the 1-DOF PAFO (up to 23.78%, p<0.0326). With the 1-DOF PAFO, the stability deteriorated with the increase in the degree of assistance provided. With the 2-DOF PAFO, this tendency was not observed. Thus, the importance of the subtalar joint was proven using PAFOs. The mean position analysis of the COP during the stance phase confirmed that the COP highly correlated with stability (Pearson correlation coefficient: -0.6607). Thus, we conclude that only the 2-DOF PAFO can maintain walking stability, regardless of the assistance characteristics, by preserving the COP in the medial position through eversion. Awareness regarding the role of the subtalar joint is necessary during the manufacture or use of PAFOs, as lack of awareness could lead to the degradation of the wearer's gait stability, regardless of effective assistance, and deteriorate the fundamental functionality of PAFO.

Mechanics of walking and running up and downhill: A joint-level perspective to guide design of lower-limb exoskeletons.

Lower-limb wearable robotic devices can improve clinical gait and reduce energetic demand in healthy populations. To help enable real-world use, we sought to examine how assistance should be applied in variable gait conditions and suggest an approach derived from knowledge of human locomotion mechanics to establish a 'roadmap' for wearable robot design. We characterized the changes in joint mechanics during walking and running across a range of incline/decline grades and then provide an analysis that informs the development of lower-limb exoskeletons capable of operating across a range of mechanical demands. We hypothesized that the distribution of limb-joint positive mechanical power would shift to the hip for incline walking and running and that the distribution of limb-joint negative mechanical power would shift to the knee for decline walking and running. Eight subjects (6M,2F) completed five walking (1.25 m s-1) trials at -8.53°, -5.71°, 0°, 5.71°, and 8.53° grade and five running (2.25 m s-1) trials at -5.71°, -2.86°, 0°, 2.86°, and 5.71° grade on a treadmill. We calculated time-varying joint moment and power output for the ankle, knee, and hip. For each gait, we examined how individual limb-joints contributed to total limb positive, negative and net power across grades. For both walking and running, changes in grade caused a redistribution of joint mechanical power generation and absorption. From level to incline walking, the ankle's contribution to limb positive power decreased from 44% on the level to 28% at 8.53° uphill grade (p < 0.0001) while the hip's contribution increased from 27% to 52% (p < 0.0001). In running, regardless of the surface gradient, the ankle was consistently the dominant source of lower-limb positive mechanical power (47-55%). In the context of our results, we outline three distinct use-modes that could be emphasized in future lower-limb exoskeleton designs 1) Energy injection: adding positive work into the gait cycle, 2) Energy extraction: removing negative work from the gait cycle, and 3) Energy transfer: extracting energy in one gait phase and then injecting it in another phase (i.e., regenerative braking).

The exoskeleton expansion: improving walking and running economy.

Since the early 2000s, researchers have been trying to develop lower-limb exoskeletons that augment human mobility by reducing the metabolic cost of walking and running versus without a device. In 2013, researchers finally broke this 'metabolic cost barrier'. We analyzed the literature through December 2019, and identified 23 studies that demonstrate exoskeleton designs that improved human walking and running economy beyond capable without a device. Here, we reviewed these studies and highlighted key innovations and techniques that enabled these devices to surpass the metabolic cost barrier and steadily improve user walking and running economy from 2013 to nearly 2020. These studies include, physiologically-informed targeting of lower-limb joints; use of off-board actuators to rapidly prototype exoskeleton controllers; mechatronic designs of both active and passive systems; and a renewed focus on human-exoskeleton interface design. Lastly, we highlight emerging trends that we anticipate will further augment wearable-device performance and pose the next grand challenges facing exoskeleton technology for augmenting human mobility.

Tremor Control Devices for Essential Tremor: A Systematic Literature Review.

Background: There is a growing interest in nonpharmacological approaches for essential tremor (ET), including tremor cancelation devices. However, the true efficacy of such devices in ET remains unclear. Methods: A systematic literature review was conducted using standardized criteria regarding efficacy and comfortability. Devices focused on design or experimental testing in which tremor was simulated in a robot were excluded. Results: Out of 324 articles initially identified, 12 articles were included. Orthoses using biomechanical loading and neuromodulation with electrical stimulation, and external tremor cancelation devices, were the main interventions used to suppress tremor. All devices were designed to control tremor of the upper limbs at different anatomical locations. Overall, an average tremor attenuation of 50-98% was reported (level of evidence III). Interference with voluntary movements and portability was described as the main drawback. Discussion: In conclusion, this review highlights the growing interest in emerging tremor control devices and the importance of assessing comfort without affecting voluntary movements. However, the level of evidence regarding the efficacy of these tremor control devices remains low. An integrated multidisciplinary combination approach of engineering, robotics, physiology, physiotherapy, and clinical assessment is needed to improve the quality of non-pharmacological interventions for ET.

Adaptive Neural Control of a Kinematically Redundant Exoskeleton Robot Using Brain-Machine Interfaces.

In this paper, a closed-loop control has been developed for the exoskeleton robot system based on brain-machine interface (BMI). Adaptive controllers in joint space, a redundancy resolution method at the velocity level, and commands that generated from BMI in task space have been integrated effectively to make the robot perform manipulation tasks controlled by human operator's electroencephalogram. By extracting the features from neural activity, the proposed intention decoding algorithm can generate the commands to control the exoskeleton robot. To achieve optimal motion, a redundancy resolution at the velocity level has been implemented through neural dynamics optimization. Considering human-robot interaction force as well as coupled dynamics during the exoskeleton operation, an adaptive controller with redundancy resolution has been designed to drive the exoskeleton tracking the planned trajectory in human brain and to offer a convenient method of dynamics compensation with minimal knowledge of the dynamics parameters of the exoskeleton robot. Extensive experiments which employed a few subjects have been carried out. In the experiments, subjects successfully fulfilled the given manipulation tasks with convergence of tracking errors, which verified that the proposed brain-controlled exoskeleton robot system is effective.

Brain-machine interfaces for controlling lower-limb powered robotic systems.

OBJECTIVE: Lower-limb, powered robotics systems such as exoskeletons and orthoses have emerged as novel robotic interventions to assist or rehabilitate people with walking disabilities. These devices are generally controlled by certain physical maneuvers, for example pressing buttons or shifting body weight. Although effective, these control schemes are not what humans naturally use. The usability and clinical relevance of these robotics systems could be further enhanced by brain-machine interfaces (BMIs). A number of preliminary studies have been published on this topic, but a systematic understanding of the experimental design, tasks, and performance of BMI-exoskeleton systems for restoration of gait is lacking. APPROACH: To address this gap, we applied standard systematic review methodology for a literature search in PubMed and EMBASE databases and identified 11 studies involving BMI-robotics systems. The devices, user population, input and output of the BMIs and robot systems respectively, neural features, decoders, denoising techniques, and system performance were reviewed and compared. MAIN RESULTS: Results showed BMIs classifying walk versus stand tasks are the most common. The results also indicate that electroencephalography (EEG) is the only recording method for humans. Performance was not clearly presented in most of the studies. Several challenges were summarized, including EEG denoising, safety, responsiveness and others. SIGNIFICANCE: We conclude that lower-body powered exoskeletons with automated gait intention detection based on BMIs open new possibilities in the assistance and rehabilitation fields, although the current performance, clinical benefits and several key challenging issues indicate that additional research and development is required to deploy these systems in the clinic and at home. Moreover, rigorous EEG denoising techniques, suitable performance metrics, consistent trial reporting, and more clinical trials are needed to advance the field.

The hybrid assisted limb (HAL) for Care Support, a motion assisting robot providing exoskeletal lumbar support, can potentially reduce lumbar load in repetitive snow-shoveling movements.

An excessive lumbar load with snow-shoveling is a serious problem in snowfall areas. Various exoskeletal robots have been developed to reduce lumbar load in lifting work. However, few studies have reported the attempt of snow-shoveling work using exoskeletal robots. The purpose of the present study was to test the hypothesis that the HAL for Care Support robot would reduce lumbar load in repetitive snow-shoveling movements. Nine healthy male volunteers performed repetitive snow-shoveling movements outdoors in a snowfall area for as long as possible until they were fatigued. The snow-shoveling trial was performed under two conditions: with and without HAL for Care Support. Outcome measures were defined as the lumbar load assessed by the VAS of lumbar fatigue after the snow-shoveling trial and the snow-shoveling performance, including the number of scoops, and snow shoveling time and distance. The mean of VAS of lumbar fatigue, the number of scoops, and snow-shoveling time and distance without HAL for Care Support were 75.4 mm, 50.3, 145 s, and 9.6 m, while with HAL for Care Support were 39.8 mm, 144, 366 s, and 35.4 m. The reduction of lumbar fatigue and improvement of snow-shoveling performance using HAL for Care Support were statistically significant. There was no adverse event during snow-shoveling with HAL for Care Support. In conclusion, the HAL for Care Support can reduce lumbar load in repetitive snow-shoveling movements.

[Transcutaneous osseointegrated prosthesis (TOP) after limb amputation : Status quo and perspectives]. / Transkutane osseointegrierte Prothesensysteme (TOPS) nach Extremitätenamputation : Status quo und Ausblick.

The majority of transfemoral and transtibial amputees can be functionally fitted with conventional suspension sockets; however, due to socket problems using conventional stump care, 60% of the patients have limited function and even in younger patients approximately one sixth are unable to wear the prosthesis daily. After the introduction of transcutaneous osseointegrated prostheses (TOP) the inherent problems of socket-stump care can be avoided for these patients. Against this background this article reviews the recent clinical development of TOP in Sweden, Germany, the Netherlands, Australia and USA currently in nine centers. Unanimously, all groups show that TOP enables physiological weight bearing, improved range of motion in the proximal joint, as well as osseoperceptive sensory feedback and better control of the artificial limb. Likewise, there is agreement that as a rule that there is a clinically less relevant superficial contamination of the stoma. Furthermore, TOP is nowadays also used for transhumeral amputees and after thumb amputation and the development of the indications for this technique are increasing. Future aspects include novel treatment options using implanted intramedullary electrodes allowing permanent and unlimited bidirectional communication with the human body (osseointegrated human-machine gateway). This could possibly realize an innovative form of prosthesis control as well as the combination of TOP and targeted muscle reinnervation (TMR) surgery to create more advanced prosthesis systems for upper and lower extremity amputees.

State of the Art and Future Directions for Lower Limb Robotic Exoskeletons.

Research on robotic exoskeletons has rapidly expanded over the previous decade. Advances in robotic hardware and energy supplies have enabled viable prototypes for human testing. This review paper describes current lower limb robotic exoskeletons, with specific regard to common trends in the field. The preponderance of published literature lacks rigorous quantitative evaluations of exoskeleton performance, making it difficult to determine the disadvantages and drawbacks of many of the devices. We analyzed common approaches in exoskeleton design and the convergence, or lack thereof, with certain technologies. We focused on actuators, sensors, energy sources, materials, and control strategies. One of the largest hurdles to be overcome in exoskeleton research is the user interface and control. More intuitive and flexible user interfaces are needed to increase the success of robotic exoskeletons. In the last section, we discuss promising future solutions to the major hurdles in exoskeleton control. A number of emerging technologies could deliver substantial advantages to existing and future exoskeleton designs. We conclude with a listing of the advantages and disadvantages of the emerging technologies and discuss possible futures for the field.