Osteosarcoma After Total Knee Arthroplasty: A Case Report.

CASE: A 79-year-old woman presented with a periprosthetic fracture 8 years after a total knee arthroplasty (TKA). Radiographs demonstrated tibial implant loosening with severe osteolysis. A high-grade osteosarcoma around the prosthesis was diagnosed, and a supracondylar femoral amputation was performed. After 2 years, no complications have occurred. CONCLUSIONS: A malignant tumor around a TKA is extremely rare. Surgeons should remain vigilant with patients who present with rapidly progressive or very aggressive implant loosening with osteolysis. Owing to its complexity and potentially devastating prognosis, treatment should be guided by a specialist multidisciplinary team. Complex limb salvage procedures or amputation is usually required.

Traumatic Floating Total Hip Arthroplasty: A Case Report.

CASE: A 58-year-old woman with medical history of a left total hip arthroplasty performed by the direct anterior (DA) approach 2 years prior presented with left hip pain. She was found to have sustained a transverse Vancouver C periprosthetic femur fracture and an unstable periprosthetic pelvic fracture. CONCLUSIONS: This patient's case represents a previously not reported injury about a total hip arthroplasty-with disruption distal to the femoral implant and proximal to the acetabular implant, with the implant-to-bone interface unaffected. This case may guide future treatment of similar injuries.

Clinical differences between periprosthetic and native distal femur fractures: a comparative observational study.

INTRODUCTION: The incidence of periprosthetic distal femur fractures (PDFF) is increasing as the number of total knee replacements becomes more common. This study compared the demographics, fracture characteristics, treatment, and outcomes of periprosthetic versus native distal femur fractures (NDFF). MATERIALS AND METHODS: This was a retrospective cohort study of patients ≥ 18 who underwent surgical fixation of NDFF or PDFF from 2012 to 2020 at a level-1 trauma center. The main variables collected included demographics, AO/OTA fracture classification, fixation construct, concomitant fractures, polytrauma rates, bone density, and reduction quality. Primary outcomes were unexpected return to the operating room (UROR), hospital length of stay, and quality of reduction. T-tests, Fisher's exact tests, and multivariate analyses were used for statistical analysis. RESULTS: 209 patients were identified, including 70 PDFF and 139 NDFF. PDFF patients were elderly females (81%) with isolated (80%) and comminuted (85%) 33 A.3 (71%) fractures. NDFF patients included 53% females, were commonly middle-aged, and displayed comminuted (92%) 33 C.2 fractures. 48% of NDFF patients had concomitant fractures. Intramedullary nailing was the primary fixation for both groups, followed by nail-plate combination (37%) for PDFF and lateral locking plates (21%) for NDFF. NDFF patients experienced significantly longer hospital stays, higher UROR rates, and worse quality of reduction (p < 0.05). PDFF patients had a significantly greater prevalence of low bone density (p < 0.05). CONCLUSION: PDFF occur as isolated injuries with significant metaphyseal comminution in elderly females with low bone quality. NDFF commonly occurs in younger patients with less metaphyseal comminution and concomitant fractures. Intramedullary nailing was the most common treatment for both groups, although preference for nail-plate combination fixation is increasing. NDFF type 33 C fractures are at greater risk of UROR.

Finite element analysis of the stability of retrograde intramedullary nail and plate-screw combinations for periprosthetic femoral fractures following total knee replacement.

OBJECTIVE: Periprosthetic fractures following total knee replacement are rare but challenging. The goal of the treatment is to achieve the most stable fixation that allows early mobilization. Therefore, the aim of this study was to evaluate the biomechanical results of the use of different fixation systems in the treatment of distal femur periprosthetic fractures with finite element analysis. MATERIALS AND METHODS: A total knee prosthesis was implanted in Sawbone femur models. A transverse fracture line was created in the supracondylar region and was fixed in four different groups. In group 1, fracture line fixation was fixed using retrograde intramedullary nailing. In group 2, fixation was applied using a lateral anatomic distal femoral. In group 3, in addition to the fixation made in group 1, a lateral anatomic distal femoral plate was used. In group 4, in addition to the fixation made in group 2, a 3.5 mm Limited Contact Dynamic Compression Plate (LC-DCP) was applied medially. Computed Tomography (CT) scans were taken of the created models and were converted to three-dimensional models. Axial and rotational loading forces were applied to all the created models. RESULTS: The least deformation with axial loading was observed in the double plate group. Group 3 was determined to be more advantageous against rotational forces. The greatest movement in the fracture line was found in group 2. The application of the medial plate was determined to reduce the tension on the lateral plate and increase stability in the fracture line. CONCLUSIONS: Combining a lateral anatomic plate with intramedullary nailing or a medial plate was seen to be biomechanically more advantageous than using a lateral plate or intramedullary nailing alone in the treatment of distal femoral periprosthetic fractures.

Recurrent implant fractures in total hip arthroplasty: a yes-you-yan case report.

This case report describes a single patient with recurrent implant fractures of his left total hip replacement. According to our knowledge this is the first patient in literature with recurrent implant fractures. This is a rare phenomenon as reason for revision. Risk factors for implant failure of total hip replacement include a lack of proximal support, a distally well fixed stem with proximal debonding, malalignment of the stem and raised BMI.

Experience of an anatomic femoral stem in a UK orthopaedic centre beyond 20 years of follow-up.

INTRODUCTION: Increasing interest in the use of anatomical stems has developed as the prevalence of periprosthetic fractures (PPFs) continues to increase. The primary aim of this study was to determine the long-term survivorship and PPF rate of an anatomical femoral stem in a single UK centre. PATIENTS AND METHODS: Between 2000 and 2002, 94 consecutive THAs were performed using the 170 mm Lubinus SP II anatomical femoral stem in our institution. Patient demographics, operative details and clinical outcomes were collected prospectively in an arthroplasty database. Patient records and national radiographic archives were reviewed finally at a mean of 21.5 years (SD 0.7) following surgery to identify occurrence of subsequent revision surgery, dislocation or periprosthetic fracture. RESULTS: Mean patient age at surgery was 65.8 years (SD 12.5, 34-88 years). There were 48 women (51%). Osteoarthritis was the operative indication in 88 patients (94%). Analysis of all-cause THA failure demonstrated a survivorship of 98.5% (95% confidence interval [CI], 98.0-99.3%) at 10 years and 96.7% (94.5-98.9%) at 21 years. The 20-year stem survival for aseptic loosening was 100% with no cases of significant lysis found (lucent line > 2 mm) and no stems required revision. Patient demographics did not appear to influence risk of revision (p > 0.05). There were 2 revisions in total (2 for acetabular loosening with original stems retained). There were no PPFs identified at mean 21.5 year follow-up and 5 dislocations (5%). CONCLUSIONS: The Lubinus SP II 170 mm stem demonstrated excellent survivorship and negligible PPF rates over 20 years following primary THA.

The use of uncemented stems in femoral neck fractures in elderly patients: A comparative study of 671 cases.

INTRODUCTION: The use of cemented stems in elderly patients is associated with the risk of intraoperative embolic complications. Uncemented stems eliminate this risk, but their use is controversial because of the risk of mechanical complications, with estimated subsidence between 3.6 and 30% and periprosthetic fractures between 2.1 and 11% at 6 weeks. A retrospective multicenter comparative study was conducted using a propensity score analysis to evaluate mechanical performances of uncemented stems in femoral neck fractures in elderly patients to (1) compare the risk of mechanical complications and (2) assess the use of metaphyseal-anchored stems for this indication. HYPOTHESIS: There is no difference in the risk of mechanical complications, intraoperatively or postoperatively, between these stems. MATERIALS AND METHODS: We conducted a multicenter retrospective comparative study including 358 uncemented and 313 cemented stems. The mean age was 84.5 years [83.9-85.1]. The inclusion criteria were patients 70 years and older and a follow-up of at least 6 weeks. The primary endpoint was a composite endpoint comprised of stem subsidence≥2mm or periprosthetic fracture (up to 3 months postoperatively). The secondary endpoints were infection, stem subsidence≥2mm, and operative time. These endpoints were analyzed using a propensity score to control confounding factors. A secondary analysis used the same endpoints to compare metaphyseal-anchored (short stems) versus Corail-like stems. RESULTS: After adjusting for the propensity score, we found 11.17% mechanical complications in the uncemented group (n=40, 5.59% subsidence, and 5.59% fractures) versus 13.42% for the cemented group (n=42, 7.99% subsidence, and 5.43% fractures). There was no statistically significant difference between the 2 values (Odds Ratio [OR]=0.64 [95% Confidence Interval [CI]: 0.14-2.85] [p=0.7]). The mortality rate due to cement embolism was 1%. There was no difference in the rate of subsidence (OR=0.55 [95% CI: 0.02-12.5] [p=0.7]), periprosthetic fracture (OR=0.65 [95% CI: 0.13-3.12] [p=0.7]) or infection (OR=0.71 [95% CI: 0.32-1.55] [p=0.4]). However, the operative times were longer in the cemented group (p=0.03 for hemiarthroplasties [mean additional time 16minutes] and p=0.02 for total hip arthroplasties [mean additional time 22minutes]). No difference was observed between the metaphyseal-anchored (short stems) and Corail-like stems regarding operative time, rate of infection, and rate of stem subsidence or periprosthetic fractures. DISCUSSION: This is one of the first studies to highlight cemented stem subsidence when used for femoral neck fractures in elderly patients. Using uncemented stems in this indication is still warranted, especially since they do not bring about more mechanical complications in the first few months. Metaphyseal-anchored short stems seem to give the same results as "standard" stems. However, these findings need to be assessed in the longer term. LEVEL OF EVIDENCE: III; retrospective comparative study.

Revision total hip arthroplasty using a modular fluted, tapered revision femoral component and interlocking screws in Vancouver B3 periprosthetic fractures with insufficient bone at the isthmus.

Aims: Revision total hip arthroplasty in patients with Vancouver type B3 fractures with Paprosky type IIIA, IIIB, and IV femoral defects are difficult to treat. One option for Paprovsky type IIIB and IV defects involves modular cementless, tapered, revision femoral components in conjunction with distal interlocking screws. The aim of this study was to analyze the rate of reoperations and complications and union of the fracture, subsidence of the stem, mortality, and the clinical outcomes in these patients. Methods: A total of 46 femoral components in patients with Vancouver B3 fractures (23 with Paprosky type IIIA, 19 with type IIIB, and four with type IV defects) in 46 patients were revised with a transfemoral approach using a modular, tapered, cementless revision Revitan curved femoral component with distal cone-in-cone fixation and prospectively followed for a mean of 48.8 months (SD 23.9; 24 to 112). The mean age of the patients was 80.4 years (66 to 100). Additional distal interlocking was also used in 23 fractures in which distal cone-in-cone fixation in the isthmus was < 3 cm. Results: One patient (2.2%) died during the first postoperative year. After six months, 43 patients (93.5%) had osseous, and three had fibrous consolidation of the fracture and the bony flap, 42 (91.3%) had bony ingrowth and four had stable fibrous fixation of the stem. No patient had radiolucency around the interlocking screws and no screw broke. One patient had non-progressive subsidence and two had a dislocation. The mean Harris Hip Score increased from of 57.8 points (SD 7.9) three months postoperatively to 76.1 points (SD 10.7) 24 months postoperatively. Conclusion: The 2° tapered, fluted revision femoral component with distal cone-in-cone-fixation, combined with additional distal interlocking in patients with bony deficiency at the isthmus, led to reproducibly good results in patients with a Vancouver B3 fracture and Paprosky type IIIA, IIIB, and IV defects with regard to union of the fracture, subsidence or loosening of the stem, and clinical outcomes.

Does Size Really Matter? Incidence of Periprosthetic Fractures After Femoral Osteotomy in Patients With Cerebral Palsy.

OBJECTIVE: Of children, 30% to 35% with cerebral palsy (CP) develop hip subluxation or dislocation and often require reconstructive hip surgery, including varus derotation osteotomy (VDRO). A recent literature review identified postoperative fractures as the most common complication (9.4%) of VDROs. This study aimed to assess risk factors for periprosthetic fracture after VDRO in children with CP. METHODS: A total of 347 patients (644 hips, 526 bilateral hips) with CP and hip subluxation or dislocation (129 females; mean age at index VDRO: 8.6 y, SD 3.4, range: 1.5 to 17.7; 2 Gross Motor Function Classification System (GMFCS) I, 35 GMFCS II, 39 GMFCS III, 119 GMFCS IV, 133 GMFCS V, 21 unavailable) were included in this retrospective, single-group intervention (VDRO) study at a tertiary referral center. Imaging and clinical documentation for patients age 18 years or younger at index surgery, treated with VDRO were reviewed to determine demographic data, GMFCS level, surgeon, type of hardware implanted, use of anticonvulsants and steroids, type of postoperative immobilization, presence of periprosthetic fractures, fracture location and mechanism, and time from surgery to fracture. Potential determinants of periprosthetic fractures were assessed using mixed effects logistic regression. RESULTS: Of 644 hips, 14 (2.2%, 95% CI: 1.3%, 3.6%) sustained a periprosthetic fracture, at a median of 2.1 years postoperatively (interquartile range: 4.6 y, range: 1.2 mo to 7.8 y). Patients with a fracture had a median age at index surgery of 7.3 years (interquartile range: 4.3, range: 2.8 to 17.8; 1 GMFCS II, 6 GMFCS IV, 7 GMFCS V). Periprosthetic fractures were not significantly related to age at index surgery ( P = 0.18), sex ( P = 0.30), body mass index percentile ( P = 0.87), surgery side ( P = 0.16), anticonvulsant use ( P = 0.35), type of postoperative immobilization ( P = 0.40), GMFCS level ( P = 0.31), or blade plate size ( P = 0.17). Only surgeon volume significantly related to periprosthetic fracture (odds ratio = 5.03, 95% CI: 1.53, 16.56, P = 0.008), with the highest-volume surgeon also using smaller blade plates ( P < 0.01). CONCLUSIONS: Periprosthetic fractures after VDRO surgery in children with CP are uncommon, and routine hardware removal appears unnecessary. The data suggest that the common dogma of putting in the largest blade plate possible to maximize fixation may increase the risk of periprosthetic fracture. Due to the overall low fracture rate, especially when contextualized relative to the risk of hardware removal, a reactive approach to hardware removal appears warranted. LEVEL OF EVIDENCE: Level III-retrospective study (targeting varus derotational osteotomies in children with cerebral palsy).

Optimizing periprosthetic fracture management and in-hospital outcome: insights from the PIPPAS multicentric study of 1387 cases in Spain.

BACKGROUND: The incidence of all periprosthetic fractures (PPF), which require complex surgical treatment associated with high morbidity and mortality, is predicted to increase. The evolving surgical management has created a knowledge gap regarding its impact on immediate outcomes. This study aimed to describe current management strategies for PPF and their repercussions for in-hospital outcomes as well as to evaluate their implications for the community. METHODS: PIPPAS (Peri-Implant PeriProsthetic Survival Analysis) was a prospective multicentre observational study of 1387 PPF performed during 2021. Descriptive statistics summarized the epidemiology, fracture characteristics, management, and immediate outcomes. A mixed-effects logistic regression model was employed to evaluate potential predictors of in-hospital mortality, complications, discharge status, and weight-bearing restrictions. RESULTS: The study encompassed 32 (2.3%) shoulder, 4 (0.3%) elbow, 751 (54.1%) hip, 590 (42.5%) knee, and 10 (0.7%) ankle PPF. Patients were older (median 84 years, IQR 77-89), frail [median clinical frailty scale (CFS) 5, IQR 3-6], presented at least one comorbidity [median Charlson comorbidity index (CCI) 5, IQR 4-7], were community dwelling (81.8%), and had outdoor ambulation ability (65.6%). Femoral knee PPF were most frequently associated with uncemented femoral components, while femoral hip PPF occurred equally in cemented and uncemented stems. Patients were managed surgically (82%), with co-management (73.9%), through open approaches (85.9%) after almost 4 days (IQR, 51.9-153.6 h), with prosthesis revision performed in 33.8% of femoral hip PPF and 6.5% of femoral knee PPF. For half of the patients, the discharge instructions mandated weight-bearing restrictions. In-hospital mortality rates were 5.2% for all PPF and 6.2% for femoral hip PPF. Frailty, age > 84 years, mild cognitive impairment, CFS > 3, CCI > 3, and non-geriatric involvement were candidate predictors for in-hospital mortality, medical complications, and discharge to a nursing care facility. Management involving revision arthroplasty by experienced surgeons favoured full weight-bearing, while an open surgical approach favoured weight-bearing restrictions. CONCLUSIONS: Current arthroplasty fixation check and revision rates deviate from established guidelines, yet full weight-bearing is favoured. A surgical delay of over 100 h and a lack of geriatric co-management were related to in-hospital mortality and medical complications. This study recommends judicious hypoaggressive approaches. Addressing complications and individualizing the surgical strategy can lead to enhanced functional outcomes, alleviating the economic and social burdens upon hospital discharge. Level of Evidence Level IV case series. TRIAL REGISTRATION: registered at ClinicalTrials.gov (NCT04663893), protocol ID: PI 20-2041.

Experimental periprosthetic fractures with collarless polished tapered cemented stems.

PURPOSE: After cemented total hip arthroplasty, the risk of periprosthetic fracture (PPF) of taper-slip stems is higher than that of composite-beam stems. We aimed to assess the conditions resulting in PPFs of taper-slip stems using a falling weight. METHODS: Taper-slip stems were fixed to five types of simulated bone models using bone cement, and the fractures were evaluated by dropping stainless-steel weights from a predetermined height onto the heads. The periprosthetic fracture height in 50% of the bone models (PPFH50) was calculated using the staircase method. RESULTS: For the fixation with 0° of flexion, the values for PPFH50 were 61 ± 11, 60 ± 13, above 110, 108 ± 49, and 78 ± 12 cm for the cobalt-chromium-molybdenum alloy, stainless steel alloy (SUS), titanium alloy (Ti), smooth surface, and thick cement mantle models, respectively; for the fixation with 10° of flexion (considering flexure), the PPFH50 values were 77 ± 5, 85 ± 9, 90 ± 2, 89 ± 5, and 81 ± 11 cm, respectively. The fracture rates of the polished-surface stems were 78.6 and 35.7% at the proximal and distal sites, respectively (p < 0.05); the fracture rates of the smooth-surface stems were 14.2 and 100%, respectively (p < 0.05). CONCLUSION: The impact tests demonstrated that the conditions that were less likely to cause PPFs were use of Ti, a smooth surface, a thick cement mantle, and probably, use of SUS.

[Dealing with early complications in unicondylar knee arthroplasty-what works, what does not?] / Umgang mit Frühkomplikationen in der unikondylären Knieprothetik ­ Was funktioniert, was nicht?

Complications in the early postoperative period following the implantation of a unicondylar knee arthroplasty (UKA) are both rare and rarely described in the literature. Often, only small case series or individual case reports are available. In this article, the most common complications of periprosthetic infection, periprosthetic tibial fracture, inlay dislocation and intra-articular cement residue in (loose bone cement body) are described and recommendations for conservative and surgical treatment are presented, including case examples. Ideally, surgical errors or an infection should be recognized at an early stage and revised as soon as possible.

Robotic-assisted total knee arthroplasty results in decreased incidence of anterior femoral notching compared to posterior referenced instrumented total knee arthroplasty.

OBJECTIVE: Periprosthetic fracture (PPF) is an uncommon but devastating complication after total knee arthroplasty (TKA). Anterior femoral notching (AFN) is one of a perioperative risk factor for PPF. The main purpose of this study was to compare between the rates of anterior femoral notching (AFN) and supracondylar periprosthetic femoral fracture (sPPF) of manual TKA and robotic arm-assisted TKA (RATKA). Meanwhile, blood loss, transfusion rates, inflammatory responses, complications, early clinical and radiological outcomes were also assessed. METHODS: This retrospective study included 330 patients (133 RATKA and 197 manual TKA). Differences in risks of inflammatory, blood loss, complications (periprosthetic fracture and periprosthetic joint infection), pre-operative and post-operative distal lateral femoral angle (LDFA), distal femoral width (DFW), prosthesis-distal femoral width (PDFW) ratio, AFN, femoral component flexion angle (FCFA), peri-operative and post-operative functional outcomes between the RATKA and manual TKA groups were compared. RESULTS: The operation time and postoperative CRP level in the RATKA group was significantly longer and higher than that in the manual TKA group (p < .001). However, there was no significant difference in postoperative WBC level (p = .217), hemoglobin loss (p = .362), postoperative drainage (p = .836), and periprosthetic fracture (p = 1.000). There was no significant difference in LDFA (p > .05), DFW(p = .834), PDFW ratio (p = .089) and FCFA (p = .315) between the two groups, but the rate of AFN in the RATKA group was significantly lower than that in the manual TKA group (p < .05). There was no significant difference in ROM between the two groups on POD3, POD 90 and 1 year (p < .05), but the FJS-12 score in the RATKA group was higher than that in the manual TKA group on 1 year (p = .001). CONCLUSION: Robotic-assisted total knee arthroplasty can decrease the incidence of anterior femoral notching compared to posterior referenced instrumented total knee arthroplasty.

Periprosthetic fracture following arthroplasty for femoral neck fracture: is a cemented stem protective?

BACKGROUND: Periprosthetic femoral fractures (PFF) carry significant morbidity following arthroplasty for femoral neck fracture (FNF). This study assessed fracture complications following arthroplasty for FNF and the effect of cement fixation of the femoral component on intraoperative and post-operative PFF. METHODS: Between February 2014 and September 2021, 740 patients with a FNF who underwent arthroplasty were analyzed for demographics, surgical management, use of cement for fixation of the femoral component, and subsequent PFF. Variables were compared with Mann-Whitney or Chi-square as appropriate. Multivariate logistic regression was used to assess independent risk factors associated with intraoperative or post-operative PFF. RESULTS: There were 163 THAs (41% cemented) and 577 HAs (95% cemented). There were 28 PFFs (3.8%): 18 post-operative and 10 intraoperative. Fewer post-operative PFFs occurred with cemented stems (1.63% vs. 6.30%, p = 0.002). Mean time from surgery to presentation with post-operative PFF was 14 months (0-45 months). Mean follow-up time was 10.3 months (range: 0-75.7 months). In multivariate regression, use of cement and THA was independently associated with decreased post-operative PFF (cement: OR 0.112, 95% CI 0.036-0.352, p < 0.001 and THA: OR 0.249, 95% CI 0.064-0.961, p = 0.044). More intraoperative fractures occurred during THA (3.68% vs. 0.69%, p = 0.004) and non-cemented procedures (5.51% vs. 0.49%, p < 0.001). In multivariate regression, use of cement was protective against intraoperative fracture (OR 0.100, CI 0.017-0.571, p = 0.010). CONCLUSIONS: In patients with a FNF treated with arthroplasty, cementing the femoral component is associated with a lower risk of intraoperative and post-operative PFF. Choice of procedure may be based on patient factors and surgeon preference.

Impact of surgical timing and type of operative procedure on outcomes in periprosthetic hip fractures: an observational study at an NHS trust centre in the UK.

PURPOSE: There is a global trend of increased periprosthetic fractures due to the growing number of arthroplasty procedures. The present study assessed the impact of factors such as time to surgery and type of surgery on the outcomes, which have been seldom evaluated for periprosthetic fractures. METHODS: An observational study was conducted on consecutive 87 patients within an NHS district hospital trust in the UK. Patients who underwent a complete hip replacement prior to the fracture, received fixation therapy, or underwent revision surgery within the specified time were screened. Patients were grouped in two ways: based on time to surgery and based on surgery type. Logistic regression models were performed to assess for statistically significant differences in post-operative complication, 30-day, and 1-year mortality rates between groups, whilst adjusting for age, gender, and ASA grade. RESULTS: Forty-one patients underwent open reduction and internal fixation (ORIF), 29 patients underwent revision arthroplasty, and 17 patients were subjected to both, ORIF and revision arthroplasty. Sixty of the 87 patients were operated on > 48 h of injury. The median hospital stay was significantly lower in the ORIF plus revision arthroplasty group, versus other surgical groups (p < 0.05) whilst it was significantly higher in the group of patients who underwent surgery after 48 h of injury (p < 0.05). Numerically higher mortality was noted in the revision arthroplasty group (31.03%, p > 0.05). The group that was operated after 48 h of injury showed greater mortality but was comparable to the other group (25% vs. 14.81%, p > 0.05). For post-operative complications, none of the variables were significantly predictive (p > 0.05). However, for 30-day mortality, ASA grade (p = 0.04) and intra-operative complications (p = 0.0001) were significantly predictive. Additionally, for 1-year mortality, ASA grade (p = 0.004) was noted to be significantly predictive. CONCLUSION: Revision and delayed periprosthetic fracture management (> 48 h after injury) group showed a numerically greater mortality risk; however, this finding was not statistically significant. ASA grading at baseline is predictive of mortality for periprosthetic fractures.

Health-related quality of life (EQ-5D) after revision arthroplasty following periprosthetic femoral fractures Vancouver B2 and B3 in geriatric trauma patients.

INTRODUCTION: The aim of this study was to determine the outcome parameters of revision arthroplasties for periprosthetic femoral fractures (PPFF) with a particular attention to quality of life (QoL) and mobility. MATERIALS AND METHODS: Retrospective single-center study of PPFF with loose implants that underwent revision arthroplasty. Depending on individual patient characteristics, either an uncemented or cemented revision stem was chosen. Data collection included demographics, complications, clinical course and outcome parameters. Follow-up took place at least one year postoperatively. RESULTS: Between 2008 and 2016, 43 patients could be included. Most patients (63%) were able to walk independently or with a walking aid after one year and amongst the surveyed patients 77% were able to reside at home. Concerning the QoL assessment, a high index of 0.8 ± 0.1 has been reached after one year. Mortality pointed out to be 9% after one year and 28% in general. CONCLUSION: The treatment of PPFF remains challenging. Although complication rates and mortality are high in this frail collective of geriatric patients, revision arthroplasty leads to good postoperative results regarding mobility and quality of life.

Vancouver B2 periprosthetic hip fractures treatment: fix or replace? A retrospective study comparing both techniques.

INTRODUCTION: Vancouver B2 periprosthetic hip fractures involve stem stability and they have been classically treated with revision surgery. Crucial factors such as age, clinical comorbidities and functional status are often neglected. The current study aims to compare clinical outcomes between patients treated with open reduction and internal fixation (ORIF) or femoral stem exchange. METHODS: This is a retrospective study that includes all Vancouver B2 periprosthetic hip fractures in a tertiary referral hospital from 2016 to 2020. Patients were divided into two groups: Group 1. Patients treated with an ORIF and Group 2. Patients treated with stem replacement. The outcomes that were compared between groups included demographic data, functional capacity, complications and mortality. RESULTS: 29 periprosthetic Vancouver B2 fractures were finally analyzed. 11 (37.9%) were treated with ORIF (Group 1) and 18 (62.1%) by stem replacement (Group 2). Surgery time (143 vs. 160 min), hemoglobin drop (1.8 vs. 2.5 g/dL) and hospital stance (25.5 vs. 29.6 days) were shorter in Group 1. According to complications, 18.2% of patients in the ORIF group had orthopedic complications compared with 44.4% in the revision group. In the revision group, 3 cases needed a two-stage revision and one of these revisions ended up with a resection arthroplasty (Girdlestone). The first-year mortality rate was 27% in Group 1 and 11% in Group 2. DISCUSSION: ORIF treatment seems to be a less aggressive and complex procedure which can lead to a faster general recovery. Revision surgery can imply a higher risk of orthopedic complications which can be severe and may require further aggressive solutions. The ORIF group mortality was similar to the proximal femur fracture rate (20-30%). In conclusion, ORIF treatment seems to be a good option especially in fragile patients with low functional demand when anatomical reduction is possible.

Unstable Vancouver B1 periprosthetic femoral fracture fixation: A biomechanical comparison between a novel C-shaped memory alloy implant and cerclage wiring.

BACKGROUND: To compare the biomechanical stability of a novel, C-shaped nickel-titanium shape memory alloy (SMA) implant (C-clip) with traditional cerclage wiring in the fixation of a Vancouver B1 (VB1) periprosthetic femoral fracture (PFF). METHODS: In total, 18 synthetic femoral fracture models were constructed to obtain unstable VB1 fracture with an oblique fracture line 8 cm below the lesser trochanter. For each model, the distal portion was repaired using a 10-hole locking plate and four distal bi-cortical screws. The proximal portion was repaired using either three, threaded cerclage wirings or three, novel C-shaped implants. Specimens underwent biomechanical testing using axial compression, torsional and four-point bending tests. Each test was performed on three specimens. RESULTS: The C-clip was statistically significantly stronger (i.e., stiffer) than cerclage wiring in the three biomechanical tests. For axial compression, medians (ranges) were 39 (39-41) and 35 (35-35) N/mm, for the C-clip and cerclage wiring, respectively. For torsion, medians (ranges) were, 0.44 (0.44-0.45) and 0.30 (0.30-0.33) N/mm for the C-clip and cerclage wiring, respectively. For the four-point bending test, medians (ranges) were 39 (39-41) and 28 (28-31) N/mm; for the C-clip and cerclage wiring, respectively. CONCLUSION: Results from this small study show that the novel, C-shaped SMA appears to be biomechanically superior to traditional cerclage wiring in terms of stiffness, axial compression, torsion and four-point bending, and may be a valuable alternative in the repair of VB1 PFF. Further research is necessary to support these results.