Expeditive carbofuran pesticide degradation by submerged thermal plasma and its accelerated mineralization by persulfate addition.

Rapid degradation of carbofuran (CBF) pesticide is effectively achieved by submerged thermal plasma (STP) without and with the addition of persulfate (PS) at two different concentrations (10 and 20 ppm). Degradation efficiency was examined using high-performance liquid chromatography (HPLC), and mineralization percentage was determined by total organic carbon (TOC) analysis. Adding 10 ppm PS showed higher degradation and mineralization percentages of 99.5% and 65.2%, respectively, than mere plasma treatment and 20 ppm PS addition to CBF solution. A relatively higher energy yield of 40 mg/kWh and a first order kinetic reaction rate of 0.262 min-1 were obtained in the 10 PS added STP treatment. Liquid chromatography mass spectrometry (LCMS) analysis illustrated reaction intermediates formed during plasma treatment. Scavenger investigation implied that •OH radical is the prime cause of CBF degradation, as degradation percentage declined to 50% in all conditions. Toxicity assessment of CBF and its degradation products was predicted using Toxicity estimation software tool (TEST), and plasma treated solutions (PTS) were experimentally investigated on Eudrilus eugeniae earthworms by monitoring its mortality rate, self-assemblage, and histopathological analysis. A lower mortality rate (46%) and self-assemblage (167 s) of earthworms were detected for plasma treated CBF than for the other conditions. The results reveal that PTS is less toxic for earthworms than untreated CBF solution. These findings imply that STP is an effective technique for bio-recalcitrant pollutants degradation in agrochemical industries.

Efficacy of cold plasma-activated water as an environmentally friendly sanitizer in egg washing.

Eggs in the United States are typically washed using chemical sanitizers such as quaternary ammonia (QA) or chlorine. Such treatments generate wash water, which could be potentially hazardous to the environment. A novel, nonthermal sanitization technique for washing shell eggs using cold plasma-activated water (PAW) was investigated in this study. The inactivation efficacy of PAW on Klebsiella michiganensis and the impact of PAW on the cuticle of the eggshell and shell strength were tested in comparison to QA. Washing inoculated eggs with PAW and QA achieved a similar microbial reduction (>5.28 log CFU/egg). Colorimetric analysis showed that ∆E-value for PAW-treated eggs was significantly lower than QA-treated eggs, suggesting higher cuticle coverage in eggs treated with PAW. The texture analysis to test for shell egg strength indicated that washing eggs with PAW did not affect the structural integrity of the eggshell when compared to eggs washed with QA. According to this study, PAW has the potential as an alternative to commercial sanitizers like QA in the egg-washing industry. PAW does not detrimentally impact shell strength or cuticle coverage and provides similar microbial reduction efficacy.

Degradation products of aflatoxin M1 (AFM1) formed by high voltage atmospheric cold plasma (HVACP) treatment.

Cold plasma technology is a novel non-thermal technology that has shown promising results for food decontamination and improving food safety. This study is a continuation of a previous investigation of the treatment of AFM1-contaminated skim and whole milk samples by HVACP. Previous research has shown HVACP is effective in degrading aflatoxin M1 (AFM1) in milk. The goal of this study is to identify the degradation products of AFM1 after HVACP treatment in pure water. An HVACP direct treatment at 90 kV using modified air (MA65: 65% O2, 30% CO2, 5% N2) was performed for up to 5 min at room temperature on a 5.0 mL water sample in a Petri dish artificially contaminated with 2 µg/mL of AFM1. The degradants of AFM1 were analyzed and their molecular formulae were elucidated by using high-performance liquid-chromatography time-of-flight mass spectrometry (HPLC-TOF-MS). Three main degradation products were observed and based on mass spectrometric fragmentation pathways, chemical structures for the degradation products were tentatively assigned. According to the structure-bioactivity relationship of AFM1, the bioactivity of the AFM1 samples treated with HVACP was reduced due to the disappearance of the C8-C9 double bond in the furofuran ring in all of the degradation products.

Plasma-microbubble treatment and sustainable agriculture application of diclofenac-contaminated wastewater.

The demand for efficient wastewater treatment is becoming increasingly urgent due to the rising threat of pharmaceutical residues in water. As a sustainable advanced oxidation process, cold plasma technology is a promising approach for water treatment. However, the adoption of the technology encounters several challenges, including the low treatment efficiency and the potentially unknown environmental impact. Here, microbubble generation was integrated with cold plasma system to enhance treatment of wastewater contaminated with diclofenac (DCF). The degradation efficiency depended on the discharge voltage, gas flow, initial concentration, and pH value. The best degradation efficiency was 90.9% after 45 min plasma-bubble treatment under the optimum process parameters. The hybrid plasma-bubble system exhibited strongly synergistic performance heralded by up to seven-times higher DCF removal rates than the two systems operated separately. The plasma-bubble treatment remains effective even after addition of SO42-, Cl-, CO32-, HCO3-, and humic acid (HA) as interfering background substances. The contributions of •O2-, O3, •OH, and H2O2 reactive species to the DCF degradation process were specified. The synergistic mechanisms for DCF degradation were deduced through the analysis of the degradation intermediates. Further, the plasma-bubble treated water was proven safe and effective to stimulate seed germination and plant growth for sustainable agriculture applications. Overall, these findings provide new insights and a feasible approach with a highly synergistic removal effect for the plasma-enhanced microbubble wastewater treatment, without generating secondary contaminants.

Effect of dielectric barrier discharge (DBD) cold plasma-activated water pre-treatment on the drying properties, kinetic parameters, and physicochemical and functional properties of Centella asiatica leaves.

Centella asiatica L. (CA) is a medicinal plant that gained significant commercial and research interest because of its bioactive compounds, which have functional properties such as antioxidant activity. However, it must be dried before use to improve its shelf life and prepare it for food and pharmaceutical applications. Therefore, in this investigation CA leaves were pre-treated with blanching and cold plasma activated water (CPAW), followed by recirculatory hot air and vacuum drying at 40, 50, and 60 °C. Vacuum-drying took 150-720 min, while hot-air drying took 60-180 min to dry. Page and Logarithmic models best fit for leaf drying kinetics, according to AIC, with R2 between 0.966 and 0.999 and RMSE between 0.001 and 0.069. CPAW pre-treatment increased leaf quality more than blanching in vacuum drying. Drying leaves at 40 °C boosted antioxidants (4021.462 µg TE (g dw)-1 and 3.356 mg GAEAC (g dw)-1), TPC (35.049 mg GAE (g dw)-1), and TFC (311.274 mg QE (g dw)-1) and is recommended. Vacuum-drying with CPAW pre-treatment preserved leaf microstructure better than hot-air drying. This study illuminates CA leaf drying behaviour and allow mass production without damaging bioactive components. These results could be used as a roadmap for future technological advances that will make it possible to use the bioactive components of CA in food formulation.

Evaluating the influence of cold plasma bubbling on protein structure and allergenicity in sesame milk.

BACKGROUND: Sesame is a traditional oilseed comprising essential amino acids. However, the presence of allergens in sesame is a significant problem in its consumption; thus, this study attempted to reduce these allergens in sesame oilseeds. OBJECTIVE: The present study aimed to evaluate the effect of cold plasma processing on structural changes in proteins, and thereby the alteration of allergenicity in sesame milk. Method: Sesame milk (300 mL) was processed using atmospheric pressure plasma bubbling unit (dielectric barrier discharge, power: 200 V, and airflow rate: 16.6 mL/min) at different exposure times (10, 20, and 30 min). RESULTS: The efficiency of plasma-bubbling unit as measured by electron paramagnetic resonance in terms of producing reactive hydroxyl (OH) radicals proved that generation of reactive species increased with exposure time. Further, the plasma-processed sesame milk subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis and differential scanning calorimetery analysis revealed that plasma bubbling increased the oxidation of proteins with respect to bubbling time. The structural analysis by Fourier transform infrared spectroscopy and circular dichroism revealed that the secondary structure of proteins was altered after plasma application. This change in the protein structure helped in changing the immunoglobulin E (IgE)-binding epitopes of the protein, which in turn reduced the allergen-binding capacity by 23% at 20-min plasma bubbling as determined by the sandwich-type enzyme-linked immunosorbent assay. However, 30-min plasma bubbling intended to increase allergenicity, possibly because of increase in IgE binding due to the generation of neo epitopes. CONCLUSION: These changes proved that plasma bubbling is a promising technology in oxidizing protein structure, and thereby reducing the allergenicity of sesame milk. However, increase in binding at 30-min bubbling is to be studied to facilitate further reduction of the binding capacity of IgE antibodies.

Thermal plasma vitrification treatment of oil-based drill cuttings: Product characterization and harmless transformation.

Oil-based drill cuttings (OBDCs) are hazardous wastes associated with the process of oil and gas extraction. In this paper, OBDCs were treated using a self-designed plasma vitrification system. The basic physicochemical properties of the OBDCs were analyzed, followed by a plasma vitrification mechanism investigation of the OBDCs. The environmental pollution risk of the vitreous slags obtained from thermal plasma treatment was also evaluated with the heavy metal extraction toxicity procedure. The batch of vitreous slags with an average glass phase content of 98.60% had a dense and smooth surface and an oxygen-to-silicon (O/Si) ratio ranging from 3.68 to 4.32, according to the findings. The melting temperature and treatment duration have a great effect on the loss ratio on acid dissolution. The leaching concentrations of Pb and Zn were 0.0004 mg/L and 0.068 mg/L, respectively, consistent with the chlorination reaction promoted by thermal plasma. Fourier transform infrared spectroscopy analysis showed that there was no organic matter in the vitreous slag, achieving the goal of harmless transition. The specific energy consumption of vitreous slags was predicted and verified by response surface methodology (RSM). This study describes the vitrification process and harmless treatment of OBDCs by thermal plasma technology, and vitreous slags have great potential for resource utilization.

Combined effect of atmospheric gas plasma and UVA light: A sustainable and green alternative for chemical decontamination and microbial inactivation of fish processing water.

The simultaneous use of UVA light irradiation coupled with low energy cold plasma generated by a dielectric barrier discharge prototype, results in significant enhancement of efficiency of the integrated process with respect to the sole plasma treatment. This effect has been demonstrated both on microbial inactivation of a food-borne pathogen, i.e. Listeria monocytogenes, and on the degradation of a compound of biological origin such as phenylalanine. In the latter case, the analysis of its reaction intermediates and the spectroscopic identification and quantification of peroxynitrites, allowed to propose mechanistic hypotheses on the nature of the observed synergistic effects. Moreover, it has been demonstrated that the process does not affect the quality of trout fillets, indicating its suitability as a chlorine-free, green, and sustainable tool for the decontamination of fish processing water.

Cold Plasma Treatment Increases Bioactive Metabolites in Oat (Avena sativa L.) Sprouts and Enhances In Vitro Osteogenic Activity of their Extracts.

Cold plasma treatment has been studied to enhance the germination, growth, and bioactive phytochemical production in crops. Here, we aimed to investigate the effects of cold plasma treatment on the growth, bioactive metabolite production, and protein expression related to the physiological and osteogenic activities of oat sprouts. Oat seeds were soaked for 12 h, and then exposed to plasma for 6 min/day for 3 days after sowing. Plasma exposure did not significantly change the growth of oat sprouts; however, increased the content of bioactive metabolites. A single exposure for 6 min on the first day (T-1) increased the content of free amino acids (39.4%), γ-aminobutyric acid (53%), and avenacoside B (23%) compared to the control. Hexacosanol content was the highest in T-3 (6 min exposure on each day for 3 days), 28% higher than that in the control. Oat sprout extracts induced the phosphorylation of adenosine 5'-monophosphate-activated protein kinase and osteoblast differentiation was enhanced by increasing the alkaline phosphatase (ALP) activity; all these effects were induced by plasma treatment. Avenacoside B content was positively correlated with ALP activity (r = 0.911, p < 0.1). These results suggest that plasma treatment has the potential to improve the value of oat sprouts and that it may be used in food fortification to enhance nutritional value for promoting human health.

Effect of cold plasma on breaking activated sludge and the output dominance of protein.

Upon contacting with water, cold plasma should produce numerous ozone molecules and free electrons at room temperature. In this study, a cold plasma generator was used to break the walls of residual activated sludge obtained from domestic sewage. The impact was mainly influenced by the ozone generated. With 800 W power, sludge wastewater pH of 12.0, and under continuous treatment for 10 h, the system's reduction efficiency for the dry sludge was ≈90%. Furthermore, the organic matter content (especially protein) of the upper layer of the sludge solution increased a lot after the sludge digestion. This observation proved the reduction of sludge from both sides. Moreover, when the cold plasma technique was compared with thermal acid hydrolysis, thermal alkali hydrolysis, and ultrasonication for extracting protein from activated sludge, cold plasma wall-breaking sludge exhibited the highest efficiency, reaching 38.2% under ambient temperature. After the analysis, the toxic metal content in the extracted protein was near zero, which is a level other protein extraction methods via sludge breaking have not achieved to date, we attribute this efficiency to free electrons the cold plasma produce. These species promote the transformation of metal ions into atomic metals, thereby facilitating their removal.

Time-dependent efficacy and safety of tooth bleaching with cold plasma and H2O2 gel.

BACKGROUND: Hydrogen peroxide (H2O2) is the commonly used bleaching agent for teeth. But it is highly corrosive to teeth for the high concentration. The cold atmospheric pressure plasma has been witnessed a novel tooth bleaching technology and could help strengthen the bleaching effect when combined with H2O2. However, the efficacy and safety might highly correlated with processing time. The present study aims to evaluate the time-dependent efficacy and safety of tooth bleaching with cold plasma and H2O2 gel in vitro. METHODS: The H2O2 concentrations of the gel used in the study are 6%, 15%, 25% and 35%, respectively and the treatment time varies from 5 to 20 min. The tooth bleaching effect was evaluated by a Crystaleye Spectrophotometer and the overall change of the colorimetric value based on three independent measurements. Meanwhile, the microhardness, roughness and tooth temperature were evaluated. The surface morphology and the elemental composition were determined by scanning electron microscope and energy-dispersive X-ray spectroscopy. RESULTS: 5 min bleaching treatment contributed to 60% of the bleaching effect maximum, the 10 min effect was close to 15 min effect. Meanwhile, the microhardness reduced and roughness increased under a treatment which was longer than 20 min. Tooth pulp chamber temperature was keeping in a safe range within 20 min treatment. CONCLUSION: 5-10 min was the best treatment time from which we can get an ideal tooth bleaching effect and less influence on tooth enamel and pulp tissue when using cold plasma and H2O2 gel.

Impacts of Trace Metals Pollution of Water, Food Crops, and Ambient Air on Population Health in Zambia and the DR Congo.

Zambia and the DR Congo are situated in the central African Copperbelt, which is part of the Lufilian geological structure arc stretching over from Kolwezi in Katanga Province in the DRC to Luanshya in Copperbelt Province in Zambia. The area has large copper-cobalt deposits of which the extraction causes severe ecosystem damage due to pollution of water, food crops, and the ambient air negatively impacting population health. Contamination of drinking water for domestic use and foods (cereals, roots and tubers, vegetables, and fruits) was determined by assessing the contents of trace metals including Mn, Ni, Pb, Zn, Co, As, U, Cd, and Cu and through a questionnaire for environmental damage. Food samples were analyzed by inductively coupled argon plasma/optical emission spectroscopy (ICP-OES), while water and urine samples were analyzed by inductively coupled argon plasma mass spectrometry (ICP-MS). Concentrations of Ni, Pb, and Cd were higher in almost all food crops, although Cu was more in samples of Cucurbita maxima and Amaranthus hybridus. Mean contents (µg/L) of Mn, Zn, Cd, Pb, and U were, respectively, 5,454.6, 2552.2, 138.7, 39.7, 2361.1, and 21.4 in the DRC and 108.9, 543.3, 0.3, 0.2, 1.5, and 0.5 in Zambia, being significantly higher and always far above World Health Organization maximum limits in the DRC. Urine samples taken only from the DRC contained trace metals with children's samples being more contaminated than adult ones. Our results conclusively echo the most critical challenges of toxic pollutants causing numerous health issues among the population. Given an outcry among households adjacent to mines about land degradation and food spoilage, and health problems over years, joint efforts are needed from public and private sectors for stringent mining exploitation monitoring for sustainable governance to protect the environment and ensure food and nutrition safety, and population well-being in Zambia and the DR Congo.

Degradation of indigo carmine in water induced by non-thermal plasma, ozone and hydrogen peroxide: A comparative study and by-product identification.

The non-thermal plasma (NTP) technique is an advanced oxidation technology (AOT) applied to the degradation of organic compounds in water. In this study, the degradation kinetics of indigo carmine was investigated systematically, applying N2-NTP, O2-NTP, ozonolysis and hydrogen peroxide and the results were compared. The transient species (OH, O and NO radicals) formed with the NTP discharge at the gas-liquid interface and their products (NO3-, NO2-, H2O2) stabilized by the water, were identified and quantified. These species contribute to the effects on the chemical characteristics of the water, such as a decrease in the pH and increase in the conductivity and redox potential. Additionally, the stabilization of the oxidative species was estimated from the degradation reactions induced by the post-discharge effect, which was significant in the case of N2-NTP, due to the presence of long-lived species, such as nitrite and nitrate. The kinetics study revealed first-order kinetics for IC color removal and the rate constant values followed the order: O2-NTP (3.0 × 10-1 min-1) > O3 (1.4 × 10-1 min-1) > N2-NTP (2.2 × 10-2 min-1) > H2O2 (negligible). Also the main by-products of N2-NTP, O2-NTP and ozonolysis degradation reaction were identified by ultra-fast liquid chromatography coupled with mass spectrometry. The route fragmentation showed the formation of indole intermediates, such as isatin, which is an important precursor in organic synthesis.

Characteristics and mechanism of toluene removal from gas by novelty array double dielectric barrier discharge combined with TiO2/Al2O3 catalyst.

A new reactor of array double dielectric barrier discharge (DDBD) combined with catalysis was prepared, and the effect of different factors on removal efficiency of toluene at pilot scale were investigated. The possible degradation mechanism was explored. The results indicate that the removal efficiency of toluene in the exhaust gas decreases with the increasing of the toluene initial concentration and the gas flow rate, but increases with the increasing of the specific energy density. When the air relative humidity is 55%, the removal efficiency of toluene is higher than that of the relative humidity by 85%. The results of XPS, FT-IR and GC-MS analysis show that the main intermediate products of removing toluene by DDBD combined with TiO2/Al2O3 catalyst are phenol, benzaldehyde, benzyl alcohol, benzoic acid, N-benzyl formamide, dimethyl terephthalate, dimethyl isophthalate and other substances. There are five possible pathways to degrade toluene by DDBD combined with TiO2/Al2O3.

A diagnosis of the plasma waves responsible for the explosive energy release of substorm onset.

During geomagnetic substorms, stored magnetic and plasma thermal energies are explosively converted into plasma kinetic energy. This rapid reconfiguration of Earth's nightside magnetosphere is manifest in the ionosphere as an auroral display that fills the sky. Progress in understanding of how substorms are initiated is hindered by a lack of quantitative analysis of the single consistent feature of onset; the rapid brightening and structuring of the most equatorward arc in the ionosphere. Here, we exploit state-of-the-art auroral measurements to construct an observational dispersion relation of waves during substorm onset. Further, we use kinetic theory of high-beta plasma to demonstrate that the shear Alfven wave dispersion relation bears remarkable similarity to the auroral dispersion relation. In contrast to prevailing theories of substorm initiation, we demonstrate that auroral beads seen during the majority of substorm onsets are likely the signature of kinetic Alfven waves driven unstable in the high-beta magnetotail.

Comparing Spore Resistance of Bacillus Strains Isolated from Hydrothermal Vents and Spacecraft Assembly Facilities to Environmental Stressors and Decontamination Treatments.

Submarine hydrothermal vents are inhabited by a variety of microorganisms capable of tolerating environmental extremes, making them ideal candidates to further expand our knowledge of the limitations for terrestrial life, including their ability to survive the exposure of spaceflight-relevant conditions. The spore resistance of two Bacillus spp. strains, APA and SBP3, isolated from two shallow vents off Panarea Island (Aeolian Islands, Italy), to artificial and environmental stressors (i.e., UVC radiation, X-rays, heat, space vacuum, hydrogen peroxide [H2O2], and low-pressure plasma), was compared with that of two close phylogenetic relatives (Bacillus horneckiae and Bacillus oceanisediminis). Additional comparisons were made with Bacillus sp. isolated from spacecraft assembly facilities (B. horneckiae, Bacillus pumilus SAFR-032, and Bacillus nealsonii) and the biodosimetry strain and space microbiology model organism Bacillus subtilis. Overall, a high degree of spore resistance to stressors was observed for the strains isolated from spacecraft assembly facilities, with an exceptional level of resistance seen by B. pumilus SAFR-032. The environmental isolate SBP3 showed a more robust spore resistance to UVC, X-rays, H2O2, dry heat, and space vacuum than the closely related B. horneckiae. Both strains (SBP3 and APA) were more thermotolerant than their relatives, B. horneckiae and B. oceanisediminis, respectively. SBP3 may have a novel use as a bacterial model organism for future interrogations into the potential of forward contamination in extraterrestrial environments (e.g., icy moons of Jupiter or Saturn), spacecraft sterilization and, broadly, microbial responses to spaceflight-relevant environmental stressors.

Ultra-trace Cu isotope ratio measurements via multi-collector ICP-mass spectrometry using Ga as internal standard: an approach applicable to micro-samples.

The capabilities of Cu isotope ratio measurements are often restricted by the small volumes of sample available and/or their low Cu concentration. In this work, an analytical approach was developed for performing Cu isotopic analysis via multi-collector ICP-mass spectrometry (MC-ICP-MS) at ultra-trace level using Ga as an internal standard for mass bias correction. The minimum concentration of Cu required for accurate and precise isotope ratio measurements was established to be 20 µg L-1 with wet plasma conditions and 5 µg L-1 with dry plasma conditions. The use of Ga as an internal standard for mass bias correction provided several advantages compared to Ni, i.e. improved internal precision on δ65Cu values and lower blank levels. Ga can also be used at a 4-fold lower concentration level than Ni. However, in wet plasma conditions, the signals of 36Ar16O21H+ and 40Ar15N16O+ interfered with the signals of 69Ga+ and 71Ga+, respectively, while in dry plasma conditions, realized by the use of a desolvation unit, 69Ga+ suffered from spectral interference from 40Ar14N21H+. These interferences were resolved by using medium mass resolution. For validation purposes, the approach was applied to commercially available blood and serum samples. The δ65Cu values for the samples measured at a concentration level of 5 µg L-1 Cu and 5 µg L-1 Ga using dry plasma conditions were in good agreement with those obtained for isotope ratio measurements at the "standard" concentration level of 200 µg L-1 Cu and 200 µg L-1 Ni using wet plasma conditions. In addition, the δ65Cu values obtained for micro-samples of serum/blood (volume of 100 µL) were in good agreement with the corresponding ones obtained using the "standard" volume for isotopic analysis (500 µL).

Chemically different non-thermal plasmas target distinct cell death pathways.

A rigorous biochemical analysis of interactions between non-thermal plasmas (NTPs) and living cells has become an important research topic, due to recent developments in biomedical applications of non-thermal plasmas. Here, we decouple distinct cell death pathways targeted by chemically different NTPs. We show that helium NTP cells treatment, results in necrosome formation and necroptosis execution, whereas air NTP leads to mTOR activation and autophagy inhibition, that induces mTOR-related necrosis. On the contrary, ozone (abundant component of air NTP) treatment alone, exhibited the highest levels of reactive oxygen species production leading to CypD-related necrosis via the mitochondrial permeability transition. Our findings offer a novel insight into plasma-induced cellular responses, and reveal distinct cell death pathways triggered by NTPs.

Investigation of hybrid plasma-catalytic removal of acetone over CuO/γ-Al2O3 catalysts using response surface method.

In this work, plasma-catalytic removal of low concentrations of acetone over CuO/γ-Al2O3 catalysts was carried out in a cylindrical dielectric barrier discharge (DBD) reactor. The combination of plasma and the CuO/γ-Al2O3 catalysts significantly enhanced the removal efficiency of acetone compared to the plasma process using the pure γ-Al2O3 support, with the 5.0 wt% CuO/γ-Al2O3 catalyst exhibiting the best acetone removal efficiency of 67.9%. Catalyst characterization was carried out to understand the effect the catalyst properties had on the activity of the CuO/γ-Al2O3 catalysts in the plasma-catalytic reaction. The results indicated that the formation of surface oxygen species on the surface of the catalysts was crucial for the oxidation of acetone in the plasma-catalytic reaction. The effects that various operating parameters (discharge power, flow rate and initial concentration of acetone) and the interactions between these parameters had on the performance of the plasma-catalytic removal of acetone over the 5.0 wt% CuO/γ-Al2O3 catalyst were investigated using central composite design (CCD). The significance of the independent variables and their interactions were evaluated by means of the Analysis of Variance (ANOVA). The results showed that the gas flow rate was the most significant factor affecting the removal efficiency of acetone, whilst the initial concentration of acetone played the most important role in determining the energy efficiency of the plasma-catalytic process.

Environmental and economic performance of plasma gasification in Enhanced Landfill Mining.

This paper describes an environmental and economic assessment of plasma gasification, one of the viable candidates for the valorisation of refuse derived fuel from Enhanced Landfill Mining. The study is based on life cycle assessment and life cycle costing. Plasma gasification is benchmarked against conventional incineration, and the study indicates that the process could have significant impact on climate change, human toxicity, particulate matter formation, metal depletion and fossil depletion. Flue gas emission, oxygen usage and disposal of residues (plasmastone) are the major environmental burdens, while electricity production and metal recovery represent the major benefits. Reductions in burdens and improvements in benefits are found when the plasmastone is valorised in building materials instead of landfilling. The study indicates that the overall environmental performance of plasma gasification is better than incineration. The study confirms a trade-off between the environmental and economic performance of the discussed scenarios. Net electrical efficiency and investment cost of the plasma gasification process and the selling price of the products are the major economic drivers.