Effect of denture cleansers on the physical and mechanical properties of CAD-CAM milled and 3D printed denture base materials: An in vitro study.

STATEMENT OF PROBLEM: Studies on the impact of denture cleansers on the physical and mechanical properties of denture bases designed and constructed by using computer software programs are lacking. PURPOSE: The purpose of this in vitro study was to test the effect of a peroxide denture cleanser on the hardness, fracture toughness, water sorption, and solubility of denture base materials manufactured by 3D printing and computer-aided design and computer-aided manufacturing (CAD-CAM) milling. MATERIAL AND METHODS: The hardness, fracture toughness, water solubility, and sorption of CAD-CAM milled and 3D printed groups (n=40) were evaluated before and after exposure to a denture cleanser. Hardness (n=10) was analyzed with a Vickers hardness testing machine, and fracture toughness (n=20) with the 3-point bend test. After the fracture of specimens, a scanning electron microscope at ×300 was used for fractographic analysis. Water sorption and solubility (n=10) were evaluated before and after immersion in denture cleanser for 6 days to simulate 180 days of immersion. Two-way repeated ANOVA and 2-way ANOVA were used to test normally distributed data, whereas the Mann Whitney U test and Wilcoxon signed ranks test were used for data that were not normally distributed (α<.05). RESULTS: The Vickers hardness and fracture toughness of both materials decreased after immersion in denture cleansers, with a higher decrease in values for the 3D printed group (P<.001). The denture cleanser had no effect on the water sorption and solubility of either group. CONCLUSIONS: Milled specimens had higher hardness values and fracture toughness before and after immersion in the denture cleanser. Denture cleansers resulted in the reduced hardness and fracture toughness of both groups, but the percentage change in the milled group was lower. Denture cleansers had no effect on water sorption or solubility.

Effect of different disinfection protocols on the surface properties of CAD-CAM denture base materials.

STATEMENT OF PROBLEM: Which disinfection protocol provides optimal water contact angle and microhardness for computer-aided design and computer-aided manufacturing (CAD-CAM) polymethyl methacrylate (PMMA) materials is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of different disinfection protocols (1% sodium hypochlorite, denture cleanser gel, and effervescent tablet) on the water contact angle and microhardness of different CAD-CAM PMMA denture base materials by comparing them with a heat-polymerized PMMA. MATERIAL AND METHODS: Disk-shaped specimens (Ø10×2 mm) were fabricated from 3 different CAD-CAM PMMAs-AvaDent (AV), Merz M-PM (M-PM), and Polident (Poli)-and a heat-polymerized PMMA (Vynacron) (CV) (n=21). Three disinfection protocols (1% sodium hypochlorite [HC], denture cleanser gel [GEL], an effervescent tablet [TAB]) were applied to simulate 180 days of cleansing. The water contact angle and microhardness of specimens were measured before and after disinfection and compared by using a 2-way ANOVA (α=.05). RESULTS: For water contact angle, material (P=.010) and disinfection protocol (P=.002) had a significant effect. The material (P<.001), disinfection protocol (P=.001), and their interaction (P<.001) significantly affected the microhardness after disinfection. When the condition after disinfection was compared with that before disinfection, the water contact angle increased significantly in all material-disinfection protocol pairs (P≤.025), and microhardness increased significantly in all material-disinfection protocol pairs (P≤.040), except for GEL- (P=.689) or TAB-applied (P=.307) AV, HC-applied M-PM (P=.219), and TAB-applied Poli (P=.159). CONCLUSIONS: The material and disinfection protocol affected the water contact angle of all tested PMMAs after disinfection, resulting in more hydrophobic surfaces for heat-polymerized or CAD-CAM PMMAs. The microhardness of heat-polymerized PMMA was less than that of all CAD-CAM PMMAs after disinfection, regardless of the protocol.

Effects of long-term cinnamaldehyde immersion on the surface roughness and color of heat-polymerized denture base resin.

STATEMENT OF PROBLEM: Cinnamaldehyde has been successfully used for the short-term disinfection of dentures; however, its long-term effects on the surface and color properties of denture base materials remain unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effects of simulated immersion in cinnamaldehyde for up to 5 years on the surface roughness and color parameters of a heat-polymerized denture resin. MATERIAL AND METHODS: Eighty Ø10×5-mm disk-shaped specimens were prepared from microwave heat-polymerized polymethylmethacrylate (PMMA) and immersed in 4 solutions (n=20): TW-tap water (control), SH - 0.5% sodium hypochlorite, PX-alkaline peroxide, and CA-cinnamaldehyde (27 µg/mL). The immersion protocol simulated 104 cycles (3.5 months), 913 cycles (2.5 years), and 1825 immersion cycles (5 years) of a daily immersion cleaning protocol, with immersion times ranging from 10 to 20-minutes. Surface roughness (Sa) and the color parameters of CIELab (L∗ a∗ b∗, ΔEab), CIEDE2000 (ΔE00), and the National Bureau of Standards (NBS) were analyzed at baseline (t=0) and after the immersion cycles. The data were analyzed by 2-way analysis of variance (ANOVA) for repeated measures and the Tukey post hoc test (α=.01). RESULTS: Sa was significantly increased in all groups after 1825 cycles compared with baseline (P<.01), regardless of the solution. Only the time factor significantly affected ΔEab, ΔE00, and NBS parameters, which were below the perceptibility and acceptability thresholds. After a simulated 5-year immersion, the surface roughness and color values of CA-treated specimens were not statistically different from those of the other groups (P>.01). CONCLUSIONS: Cinnamaldehyde solution (27 µg/mL) produced minor effects on the surface roughness and color parameters of a heat-polymerized denture base resin similar to those of 0.5% sodium hypochlorite and alkaline peroxide after a 5-year simulated immersion.

Effect of local hygiene protocols on denture-related stomatitis, biofilm, microbial load, and odor: A randomized controlled trial.

STATEMENT OF PROBLEM: Denture stomatitis affects complete denture wearers and is frequently treated with antifungals drugs, as well as treating the denture with sodium hypochlorite. Whether the limitations of these treatments can be overcome with local hygiene protocols that do not damage the denture materials or adversely affect the patient is unclear. PURPOSE: The purpose of this randomized controlled trial was to evaluate the effect of denture hygiene protocols on complete denture wearers with denture stomatitis. MATERIAL AND METHODS: For this randomized, double-blind controlled clinical trial, 108 participants were assigned to parallel groups: 0.25% sodium hypochlorite (positive control) 0.15% Triclosan, denture cleaning tablets, or denture cleaning tablets plus gingival cleaning tablets. The participants were instructed to brush the dentures and the palate and immerse the denture in the solutions. The outcomes of denture stomatitis remission, biofilm removal, decrease of microbial load (colony-forming units), and odor level of the mouth and denture were measured at baseline and after 10 days. Descriptive analyses were used for sociodemographic characterization of the participants; the Pearson chi-square test was used to compare participant frequency with different degrees of denture stomatitis. The data were not normally distributed (Shapiro-Wilks test) or homogeneous (Levene test). So, the Kruskal-Wallis and Dunn post hoc tests and Wilcoxon test were used to compare the effects of solutions and time on the variables (α=.05). RESULTS: The frequency of the highest to lowest denture stomatitis scores was significantly different for the 0.15% Triclosan and denture cleaning tablets groups. No significant difference was found among the groups in terms of denture stomatitis scores, biofilm, or colony-forming unit count of Candida spp. or C. albicans and S. mutans; a significant reduction was found in these parameters. The 0.25% sodium hypochlorite and 0.15% Triclosan treatments caused a significant reduction in Gram-negative microorganisms; these 2 protocols, and the denture cleaning tablets showed a significant reduction in Staphylococcus spp.; all protocols had similar effects. Only the S. mutans count of the palate decreased after 10 days. The odor level of the mouth and the denture was not significantly different (P=.778). CONCLUSIONS: The evaluated protocols can be recommended for the hygiene of complete dentures, since they were effective for all the variables studied.

Development of a United Kingdom-centric cost-effectiveness model for denture cleaning strategies.

STATEMENT OF PROBLEM: Denture stomatitis is a prevalent condition in denture wearers. Economic evaluations of health care can help stakeholders, including patients, make better decisions about treatments for a given condition. Economic models to assess the costs and benefits of different options for managing denture stomatitis are lacking. PURPOSE: The purpose of this study was to explore the feasibility of developing a cost-effectiveness model to assess denture cleaning strategies aimed at preventing denture stomatitis from a denture-wearer perspective in the United Kingdom. MATERIAL AND METHODS: A model was developed to identify and estimate the costs and effects associated with 3 denture cleaning strategies. These were low care (LC)-cleaning by brushing and soaking overnight in water; medium care (MC)-brushing with toothpaste and soaking overnight in water; and optimum care (OC)-brushing and soaking overnight in water and antimicrobial denture cleanser. Costs, outcome measures (denture stomatitis-free days), and probabilities (incidence of stomatitis, unscheduled dentist visits, prescription charges, self-medication) associated with each strategy were defined. A sensitivity analysis was used to identify key drivers and test the robustness of the model. RESULTS: The model showed that the total costs for 2015 ranged from £1.07 (LC) to £18.42 (OC). Costs associated with LC were derived from unscheduled dentist visits and use of medication and/or prescription charges. Incremental costs per denture stomatitis-free day were £0.64 (MC) and £1.81 (OC) compared with LC. A sensitivity analysis showed that varying either or both key parameters (baseline incidence of denture stomatitis and relative effectiveness of MC and OC strategies) had a substantial effect. Incremental cost-effectiveness ratios ranged from £4.11 to £7.39 (worst-case scenario) and from £0.21 to £0.61 (best-case scenario). CONCLUSIONS: A model was developed to assess the relative cost-effectiveness of different denture cleaning strategies to help improve denture hygiene. An important finding of the study was the lack of evidence on the relative effectiveness of different cleaning strategies, meaning that several assumptions had to be incorporated into the model. The model output would therefore likely be considerably improved and more robust if these evidence gaps were filled.

Evaluation of a Realistic Cleansing Protocol for Preventing Discoloration of Denture Resins.

PURPOSE: To evaluate the efficacy of a realistic staining/cleansing protocol for long-term prevention of discoloration of denture base resins. MATERIALS AND METHODS: Sixty discs (20 × 2.5 mm) of auto- and heat-polymerizing denture acrylic resins were fabricated following manufacturer's instructions, polished on one side and stored in water (37°C) for 24 hours before they were assigned randomly into 6 groups (3 for each material, n = 10) to receive 220 cycles of three immersion protocols. Group A was immersed in the following baths: (1) filtered coffee at 45°C for 2 minutes, (2) tap water at 24°C for 20 seconds, (3) as bath 1, (4) as bath 2, (5) Corega Extradent cleansing solution at 45°C for 3 minutes, and (6) water at 24°C for 20 seconds. Group B was immersed in the four first baths of group A (without cleansing action) and group C in bath 1 for the cumulative action of 20 cycles (80 minutes in 45°C coffee) and bath 2 for 40 seconds. A noncontact optical interferometric profilometer was used for qualitative evaluation of the specimens and a contact colorimeter to estimate color change values (ΔΕ*ab) at baseline and every 20 cycles in the baths for a total of 220 cycles. Data were statistically analyzed using a 2-way-repeated measures ANOVA with Bonferoni multiple comparisons and trend analysis at α = 0.05 level of significance. RESULTS: Data indicated changes in color from 1.7 to 14.2 ΔΕ*ab units. The highest values were related to the number of cycles and group B immersion protocol. Significant differences were found among immersion protocols (p < 0.001) and immersion cycles (p < 0.001) with a significant interaction between protocols and cycles (p < 0.001) but not between denture resins (p = 0.991). CONCLUSION: The evaluated protocol A was found effective in preventing color changes in both denture resins even after a long period of action. Protocol C had a much lower staining effect on both resins than protocol B and behaved similarly to protocol A until 140 to 160 cycles. Therefore, it is probably not appropriate for use in short-term color stability experiments.

Influence of denture surface roughness and host factors on dental calculi formation on dentures: a cross-sectional study.

BACKGROUND: Dental calculi formation on dentures can worsen the oral cavity environment by complicating oral hygiene. However, few studies have investigated the effect of how patients use and manage their dentures, denture surface roughness, and host factors such as oral cavity dryness and saliva properties on denture cleanliness and denture dental calculi formation. Accordingly, we conducted the present survey to evaluate these factors to clarify the strength of the influence of each factor. METHODS: We enrolled 53 patients who had used dentures for at least 3 months and used a dental prosthesis that covered at least the six front teeth including the left and right mandibular canines. After staining the dentures, we divided the participants into a group that was positive for dental calculi (DCP group) and a group that was negative for dental calculi (DCN group). After removing all the stains, we evaluated the surface roughness of the dentures. A questionnaire was used to survey how the participants used and managed their dentures. Oral cavity dryness was evaluated, and resting saliva samples were collected to assess saliva properties. Correlations between the presence or absence of dental calculi and denture use and management were evaluated using a chi-square test. Correlations with denture surface roughness, oral cavity dryness, and saliva properties were evaluated using the Mann-Whitney U test. Correlations between the presence or absence of dental calculi and all factors were analyzed using multivariate analysis (quantification II). RESULTS: Surface roughness was significantly greater in the DCP group (p < 0.01), and the DCP group members wore their dentures during sleep significantly more often and used a denture cleaner when storing their dentures significantly less often (both p < 0.01). No significant differences were observed for oral cavity dryness or saliva properties. The multivariate analysis showed significant correlations of dental calculi formation with denture surface roughness and items related to denture use and management, but not for oral cavity dryness or saliva properties. CONCLUSIONS: Our findings indicate that dental calculi formation is influenced by how dentures are used and managed and by denture surface roughness, but not by oral cavity dryness and saliva properties.

Denture Hygiene Knowledge and Practices among Complete Denture Wearers attending a Postgraduate Dental Institute.

AIMS: The aim of this study was to assess the denture hygiene knowledge and practices among patients using complete dentures attending a postgraduate dental hospital in Jabalpur city. The objective of this study was to assess the relationship between hygiene knowledge and practices to the denture wearer's gender, education, and income. MATERIALS AND METHODS: A descriptive, cross-sectional survey was conducted using a self-administered questionnaire involving the complete denture patients attending the Department of Prosthodontics. The study subjects were randomly selected by recruiting old dentures wearers visiting the Department of Prosthodontics for a recall visit or for new dentures on the odd dates of the month. All subjects signed an informed consent before filling the questionnaire. The institutional review committee approved the study. Descriptive statistics included computation of frequencies and percentages. Nonparametric test, namely, chi-square test, was used for further data analysis; p-value <0.05 was considered statistically significant. RESULTS: A total of 530 individuals were approached for participation in our survey, 30 (5.66%) subjects declined to participate. The results showed that 195 (39%) subjects were wearing the same dentures for more than 5 years. In this study, 51 (10.2%) subjects reported never having been advised by their dentists as to how to clean their dentures. Among all the subjects interviewed, 264 (52.8%) reported to clean the oral tissues daily. This study disclosed that 66 (13.2%) of the subjects usually slept with their dentures. Maximum subjects in illiterate group had experienced bad breath sometimes when compared with subjects in postgraduate group (χ2 = 47.452, p < 0.001). There was a significant difference for method of denture cleaning according to gender (χ2 = 101.076, p < 0.001). CONCLUSION: The majority of the denture wearers have limited knowledge of denture cleansing and oral hygiene practices. Hygiene habits and practices may not always present a positive correlation with the gender, educational level, and income of the subjects. CLINICAL SIGNIFICANCE: Periodic recall for evaluation of denture and mucosal surfaces along with reinforcement of denture hygiene instructions will go a long way in helping the patients reap maximum benefits out of their prostheses.

"Nature cures:" An alternative herbal formulation as a denture cleanser.

BACKGROUND: Candida albicans is one of the microorganisms which harbor the oral cavity, especially in elderly. However, the incidence of existence of this increases in patients using removable dental prosthesis. There is therefore a need to test the anticandidal efficacy of these cost-effective, easily available products to be used as routine denture cleansers. AIM AND OBJECTIVES: (1) To evaluate antifungal properties of triphala churna on the heat cure denture base material. (2) To evaluate the antifungal effect of chlorhexidine gluconate on the heat cure denture base material. (3) To compare the antifungal effect of triphala churna and chlorhexidine gluconate with a control. (4) To evaluate which among triphala churna and chlorhexidine gluconate has a better antifungal property on the heat cure denture base material. MATERIALS AND METHODS: Study population consisted of sixty dentures wearers from those attending the Outpatient Department of Prosthodontics of the School of Dentistry, Krishna Institute of Medical Sciences Deemed University, Karad. Swabs were collected from the dentures before and after the use of triphala and chlorhexidine. The swabs were cultured on Sabouraud dextrose agar and the total Candida counts were determined. CONCLUSION: Triphala as an antifungal is shown to have more efficacy than the conventional chlorhexidine mouthwash. Résumé Arrière-plan: Candida albicans est l'un des micro-organismes qui abritent la cavité buccale surtout chez les personnes âgées. Cependant, l'incidence de l'existence de cette augmentation chez les patients utilisant des prothèses dentaires amovibles. Il est donc nécessaire de tester l'efficacité anticancédique de ces produits rentables et faciles à utiliser pour être utilisés comme nettoyants de routine pour prothèses dentaires. Buts et Objectifs: (1) Évaluer les propriétés antifongiques de Triphala churna sur le matériau de base de la prothèse thermo-durcissable. (2) Évaluer l'effet antifongique du gluconate de chlorhexidine sur le matériau de base de la prothèse thermo-durcissable. (3) Comparer l'effet antifongique de Triphala churna et du gluconate de chlorhexidine avec un témoin. (4) Évaluer lequel parmi Triphala churna et le gluconate de chlorhexidine a une meilleure propriété antifongique sur le matériel de base de la prothèse de durcissement à chaud. Matériaux et Méthode: La population de l'étude était constituée de soixante porteurs de prothèses dentaires de ceux qui fréquentaient le Département de Prosthodontie de l'École des Sciences Dentaires de l'Institut Krishna des Sciences Médicales de l'Université de Karad. Des prélèvements ont été effectués sur les prothèses avant et après l'utilisation de Triphala et de chlorhexidine. On a cultivé les écouvillons sur de l'agar Sabouraud dextrose et on a déterminé le nombre total de candida. CONCLUSION: Triphala comme un anti fongique est démontré pour avoir plus d'efficacité que le lavage de la bouche classique chlorhexidine.

Preventive oral health intervention among old home care clients.

Background: poor oral health is common among older people dependent on supportive care and it affects their quality of life. Cognitive impairment and functional dependency may increase the risk of compromised daily oral hygiene. Aim: to investigate the effectiveness of a tailored preventive oral health intervention among home care clients aged 75 years or over. Patients and methods: the intervention group comprised 151 patients (84.4 ± 5.6 years) and the control group 118 patients (84.7 ± 5.2 years). An interview and a clinical examination were carried out before a tailored intervention of oral and denture hygiene. The participants in both groups were re-interviewed and re-examined after 6 months. Results: the intervention significantly reduced the number of plaque covered teeth and improved denture hygiene. In addition, functional ability and cognitive function were significantly associated with better oral hygiene. Conclusions: the intervention had a positive effect on oral hygiene, however the number of teeth with plaque remained high, even after the intervention. Multiple approaches based on individual needs are required to improve the oral health of vulnerable older adults, including integrating dental preventive care into daily care plan carried out by home care nurses.

Effect of sodium hypochlorite and Ricinus communis solutions on control of denture biofilm: A randomized crossover clinical trial.

STATEMENT OF PROBLEM: The prevalence of complete edentulism remains high in the elderly, and previous data have shown that poor denture hygiene is common among patients with edentulism. PURPOSE: The purpose of this randomized crossover trial was to evaluate the efficacy of denture cleansers in terms of biofilm removal, antimicrobial action, and the remission of denture stomatitis. MATERIAL AND METHODS: Fifty denture wearers with denture stomatitis were instructed to brush their dentures (brush and soap) and to soak them (20 minutes/14 days) in 4 solutions, as follows: C (control), 0.85% saline; SH1, 0.1% sodium hypochlorite; SH2, 0.2% sodium hypochlorite; and RC, 8% Ricinus communis. The biofilm in the intaglio surface of maxillary dentures was stained, photographed, and quantified by software (Image Tool). It was then collected (brushed with saline solution), and the obtained suspension was diluted (100 to 10-3) and seeded (50 µL) in CHROMagar for Candida spp. After incubation, colony-forming units per milliliter values were calculated. Denture stomatitis remission was classified according to the Newton classification. Data were analyzed by Friedman (α=.05) and Wilcoxon tests and corrected by the Bonferroni test (α=.005). RESULTS: SH1 (mean rank [MR]=1.98) and SH2 (MR=1.64) showed lower biofilm coverage than C (MR=3.73) that was similar to RC (MR=2.92). SH1 (MR=2.43) and SH2 (MR=2.10) showed antimicrobial action for Candida spp, and RC (MR=3.36) showed similar results to C (MR=3.51) and baseline (MR=3.50). Clinical signs of denture stomatitis were reduced by SH1 (MR=2.44), while SH2 (MR=2.56) and RC (MR=2.74) showed intermediate results. CONCLUSIONS: The two sodium hypochlorite solutions were the most effective means of biofilm control. All tested solutions were effective in reducing the signs of denture stomatitis.

Part 2: Oral health care for the housebound patient.

Oral disease can have a significant impact on the health and wellbeing of the housebound patient. The aetiology of oral conditions such as dental caries and periodontal disease have been well investigated and there is a solid evidence base in how to best prevent their progress. The Department of Health document Delivering better oral health: an evidence-based toolkit for prevention is a valuable resource that outlines the current best preventative evidence in the form of practical advice for clinicians and patients. This article aims to distil and present this advice for the benefit of community nurses. It will identify areas of particular importance for people with additional needs, particularly the elderly and infirm. Outlining how to best tailor preventative advice and treatment for this patient group.

Evaluating the efficacy of denture cleansing materials in removal of tea and turmeric stains: An in vitro study.

CONTEXT: Extrinsic staining of acrylic resin dentures could be a major esthetic problem for denture wearers. Tea, coffee, cola, turmeric, and tobacco often cause extrinsic staining of dentures. AIM: To evaluate the efficacy of various denture cleansing materials in the removal of tea and turmeric stains and to compare the efficacy of those denture cleansers with each other in the removal of tea and turmeric stains. MATERIALS AND METHODS: Heat-cured acrylic resin specimens were stained using tea and turmeric solutions. The spectrophotometer was used to determine the reflectance values of the samples and to evaluate the efficacy of various denture cleansing materials in removal of tea and turmeric stains. Three denture cleansers, namely, sodium hypochlorite, Safe plus, and Clinsodent were used in the study. Water was used as a control. STATISTICAL ANALYSIS USED: ANOVA test and post hoc Tukey's test were used to determine the statistical difference between the groups. RESULT: A statistically significant difference was found (p ≤ 0.05) between the different denture cleansing materials used. Products containing sodium perborate along with trisodium phosphate had the highest stain removing capability. CONCLUSION: It was found that all the denture cleansing materials used in the study were effective in removing tea and turmeric stains. Products containing sodium perborate along with trisodium phosphate had a comparatively greater stain removal capability than products containing sodium perborate along with sodium bicarbonate followed by products containing sodium hypochlorite followed by water (control).

Effectiveness of chemical disinfection on biofilms of relined dentures: A randomized clinical trial.

PURPOSE: To evaluate the effect of disinfection with sodium perborate or chlorhexidine (when combined with brushing) on the removal of biofilm in relined dentures. METHODS: Swabs were collected 48 hours after the relining procedure and at the follow-up time intervals of 7, 15, 30, 90, and 180 days. The dentures' surface roughness was measured at the same times. 45 subjects were randomly divided into three groups of 15 subjects each. The control group brushed with coconut soap and a soft toothbrush. The sodium perborate group followed the same procedure and also disinfected with sodium perborate solution for 5 minutes per day. The chlorhexidine group followed the control group procedure and disinfected with 2% chlorhexidine digluconate solution for 5 minutes per day. The number of colony forming units and the surface roughness were evaluated statistically by 2-way repeated-measure ANOVA (α = 0.05). RESULTS: The control group dentures exhibited similar levels of microbial cells throughout the experiment. However, after 15 days, no microbial growth was observed on the dentures for which either disinfection agent was used. There were no statistically significant differences in superficial roughness between the groups (P = 0.298). The disinfection agents used, combined with brushing, were able to remove the relined dentures' biofilm after 15 days of disinfection. Roughness was not a predominant factor in CFU reduction.

Behaviour of the Elderly with Regard to Hygiene Procedures for and Maintenance of Removable Dentures.

PURPOSE: To assess the behaviour of the elderly with regard to hygiene procedures for and maintenance of removable dentures. MATERIALS AND METHODS: 243 elderly people were interviewed using a semi-structured questionnaire, which was applied in the coverage area of Family Health Strategy in Urlandia district in the city of Santa Maria, Brazil. RESULTS: The majority of those interviewed were 60 to 69 years old, with a prevalence of women and incomplete primary school education. In general, the dentures had been worn for more than 10 years and 43.7% of them had been made by a dental prosthetic technician. More than half the study population had not received instructions on hygiene and maintenance of the dentures. CONCLUSION: This population was not aware of the importance of hygiene and maintenance of the removable dentures. It is worrying that a considerable number of elderly have sought dental prosthetic care from technicians who were not trained to promote and maintain health.

Effectiveness of a Chlorhexidine Digluconate 0.12% and Cetylpyridinium Chloride 0.05% Solution in eliminating Candida albicans Colonizing Dentures: A Randomized Clinical in vivo Study.

BACKGROUND: Effective denture hygiene is important for patients suffering from denture stomatitis (DS). This study aimed to evaluate the efficacy of a solution containing 0.12% chlorhexidine (CHX) digluconate and 0.05% cetylpyridinium chloride (CPC) in eliminating Candida albicans colonizing dentures. MATERIALS AND METHODS: Forty denture wearers (11 men, 29 women; age range 40 to 80 years) with clinical evidence of DS were randomly divided into two groups, one test and one control. The dentures of the test group were treated by immersion in a solution of 0.12% CHX and 0.05% CPC while those of the control group were immersed in distilled water. Swabs were collected from the fitting surfaces of the upper dentures prior and post cleaner use and examined mycologically. RESULTS: Reduction in the number of colony-forming units (CFU) of Candida albicans after immersion of the dentures in a solution of 0.12% CHX and 0.05% CPC was significantly greater than that of the control group. CONCLUSION: A solution of 0.12% CHX and 0.05% CPC tested as a product of disinfection of the acrylic dentures showed significant results after immersion of 8 night hours for 4 days.

Influence of educational materials on the hygiene and utilization habits of denture wearers.

The objective of this study was to investigate the influence of educational materials on the denture hygiene and utilization habits of 70 adult volunteers who had been using complete dentures for at least 5 years. On the day they received new dentures, 32 patients were provided with an illustrated leaflet and verbal instructions on oral hygiene and utilization habits, while the remaining 38 participants were advised to continue cleaning and wearing their new dentures as they had their previous dentures. After a 6- to 10-week period, 66 of 70 subjects were interviewed about socioeconomic factors, denture hygiene, and utilization habits. The percentage of patients with a proper denture care routine was low in both groups, suggesting that patients had a tendency not to change old habits. However, statistical analysis showed a positive correlation between receiving instruction and performing denture care in a way that is closer to the recommended method: brushing without toothpaste, using a specific brush; soaking in a sodium hypochlorite solution; and removing the prosthesis at night. Within the limitations of this study, it was concluded that this approach to patient education could be applied to improve the hygiene and utilization habits of denture wearers as well as encourage the correct use of complete dentures.

Assessment of hygiene habits and attitudes among removable partial denture wearers in a university hospital.

AIMS: The aim of this study was conducting a survey of hygiene habits and use of removable partial dentures (RPDs) and correlate them with the social conditions of the interviewees. METHODS: A total of 145 RPD wearers were interviewed by experienced clinical staff using a structured questionnaire. A Chi-squared test was performed to evaluate statistical significance between the variables, and the level of significance was P<0.05. RESULTS: A total of 72 (49%) patients reported that they had not been well informed by the dentists. Brushing was the most frequent cleaning method (57.6%). 77 (53.1%) patients did not take off their dentures at night. The frequency of cleaning dentures and using cleansing tablet was significantly higher in females than in males (P<0.05). The frequency of denture cleaning, cleaned parts of denture, use of cleansing tablet, removal of dentures at night, frequency of tooth brushing, does not show any significant difference according to age, educational status or duration of denture usage (P>0.05). RPD wearers did not clean their dentures and natural teeth satisfactorily and had limited knowledge of denture cleansing and oral hygiene maintenance. CONCLUSIONS: Hygiene habits and attitudes may be affected by gender, but education level and hygiene attitudes may not always present positive correlation. Dentists should thoroughly inform patients about the harmful effects of overnight wearing and motivate to clean metal parts of RPD's and cleansing tablet use in order to minimize the abrasive effect of widely preferred cleaning method of brushing with toothpaste.

Effect of daily use of an enzymatic denture cleanser on Candida albicans biofilms formed on polyamide and poly(methyl methacrylate) resins: an in vitro study.

STATEMENT OF PROBLEM: Candida biofilms on denture surfaces are substantially reduced after a single immersion in denture cleanser. However, whether this effect is maintained when dentures are immersed in cleanser daily is unclear. PURPOSE: The purpose of this study was to evaluate the effect of the daily use of enzymatic cleanser on Candida albicans biofilms on denture base materials. MATERIAL AND METHODS: The surfaces of polyamide and poly(methyl methacrylate) resin specimens (n=54) were standardized and divided into 12 groups (n=9 per group), according to study factors (material type, treatment type, and periods of treatment). Candida albicans biofilms were allowed to form over 72 hours, after which the specimens were treated with enzymatic cleanser once daily for 1, 4, or 7 days. Thereafter, residual biofilm was ultrasonically removed and analyzed for viable cells (colony forming units/mm(2)) and enzymatic activity (phospholipase, aspartyl-protease, and hemolysin). Factors that interfered with the response variables were analyzed by 3-way ANOVA with the Holm-Sidak multiple comparison method (α=.05). RESULTS: Polyamide resin presented more viable cells of Candida albicans (P<.001) for both the evaluated treatment types and periods. Although enzymatic cleansing significantly (P<.001) reduced viable cells, daily use did not maintain this reduction (P<.001). Phospholipase activity significantly increased with time (P<.001) for both materials and treatments. However, poly(methyl methacrylate) based resin (P<.001) and enzymatic cleansing treatment (P<.001) contributed to lower phospholipase activity. Aspartyl-protease and hemolysin activities were not influenced by study factors (P>.05). CONCLUSIONS: Although daily use of an enzymatic cleanser reduced the number of viable cells and phospholipase activity, this treatment was not effective against residual biofilm over time.