Challenges for the application of bacteriophages as effective antibacterial agents in the food industry.

Food contamination caused by foodborne pathogens is one of the most important concerns in public health worldwide, and accounts for a significant portion of food loss every year. The emergence of antimicrobial resistant bacteria has turned the attention of researchers back to the potential of bacteriophages as antibacterial agents, and their use has been attempted in various pre-and post-harvest food production settings. The application of phage-based antibacterial products has achieved considerable success but a number of technical, environmental and administrative challenges remain unaddressed. In this review, we summarize the current status of bacteriophage application in the food industry. We discuss the obstacles facing the further development of phage-based antibacterial products from the aspects of technology, environmental safety, and administrative policy. We also advance some possible solutions to these challenges. © 2021 Society of Chemical Industry.

Processing environment monitoring in low moisture food production facilities: Are we looking for the right microorganisms?

Processing environment monitoring is gaining increasing importance in the context of food safety management plans/HACCP programs, since past outbreaks have shown the relevance of the environment as contamination pathway, therefore requiring to ensure the safety of products. However, there are still many open questions and a lack of clarity on how to set up a meaningful program, which would provide early warnings of potential product contamination. Therefore, the current paper aims to summarize and evaluate existing scientific information on outbreaks, relevant pathogens in low moisture foods, and knowledge on indicators, including their contribution to a "clean" environment capable of limiting the spread of pathogens in dry production environments. This paper also outlines the essential elements of a processing environment monitoring program thereby supporting the design and implementation of better programs focusing on the relevant microorganisms. This guidance document is intended to help industry and regulators focus and set up targeted processing environment monitoring programs depending on their purpose, and therefore provide the essential elements needed to improve food safety.

Characteristics of SARS-CoV-2 Transmission among Meat Processing Workers in Nebraska, USA, and Effectiveness of Risk Mitigation Measures.

The coronavirus disease (COVID-19) pandemic has severely impacted the meat processing industry in the United States. We sought to detail demographics and outcomes of severe acute respiratory syndrome coronavirus 2 infections among workers in Nebraska meat processing facilities and determine the effects of initiating universal mask policies and installing physical barriers at 13 meat processing facilities. During April 1-July 31, 2020, COVID-19 was diagnosed in 5,002 Nebraska meat processing workers (attack rate 19%). After initiating both universal masking and physical barrier interventions, 8/13 facilities showed a statistically significant reduction in COVID-19 incidence in <10 days. Characteristics and incidence of confirmed cases aligned with many nationwide trends becoming apparent during this pandemic: specifically, high attack rates among meat processing industry workers, disproportionately high risk of adverse outcomes among ethnic and racial minority groups and men, and effectiveness of using multiple prevention and control interventions to reduce disease transmission.

Non-thermal plasma: An advanced technology for food industry.

In this era of green technology, plasma technology is one of the novel techniques intended towards many industries including food industry as a principal application due to less utilization of energy, solvents, and water with minimum impact on food quality. The foremost purpose behind the utilization of nonthermal plasma processing (cold plasma) lies in the retention of freshness of food products along with furtherance of sensory properties as well as functional and nutritional composition. In addition, this technique assists in shelf life extension and carries out desirable modifications in the structure of food and packaging material. This technology has been proven to be advantageous over other technologies since all these processes are carried out at low temperature, hence is highly suitable for heat-sensitive materials. The present review summarizes the mechanism of this plasma technology along with its benefits to the industry, for example improvements in cooking quality, enhancements in enzyme activity, modification of starches, and microbial inactivation. Also, the effects of plasma treatment on characteristics of various food products have been elaborated in this review.

Linking Production and Consumption: The Role for Fish and Seafood in a Healthy and Sustainable Australian Diet.

Fish and seafood consumption in Australia has been growing, yet the implications of this trend across the food system, from both a health and sustainability perspective have not been fully explored. This paper aims to map out the fish and seafood food system in Australia, linking production and consumption, to articulate challenges and opportunities for enhancing the sector's contribution to future healthy and sustainable diets. We conducted a secondary analysis of publicly available datasets on fish and seafood production and consumption, triangulated and supplemented with peer-reviewed and grey literature on environmental, economic and social sustainability issues throughout the food system. A key challenge for health is the high proportion of fish and seafood consumed as discretionary food, particularly among children. Key challenges for sustainability include the narrow focus on environmental sustainability (with little consideration of the other domains), and the focus on production with little consideration for sustainability throughout post-harvest handling, processing, retail, distribution and consumption. Key opportunities for health and sustainability include the innovative use of processing and packaging technology to maximise nutritional quality; creation of markets and supply chains for a greater diversity of underutilised fish and seafood species and processing by-products; and reductions in waste and loss throughout the entire supply chain.

Novel technologies applied for recovery and value addition of high value compounds from plant byproducts: A review.

Plant byproducts of food processing industry line are undervalued yet important resource. These byproducts contain large percentage of high value functional substances such as antioxidants, pectin, polyphenols and so on. Recently, many research studies concentrated on innovative technologies that promise to overcome such issues as time consuming, inefficiency, and low yield, among others, which exist in most conventional techniques. Consequently, to achieve the recovery of nutraceuticals from high added-value by-products, it is necessary to have more knowledge of these novel technologies and more importantly explore the possibility of application of these latest technologies to the recovery downstream processing. The present work will summarize state-of-the-art technological approaches concerning extraction, superfine and drying applied to plant food processing residues. Simultaneously, the application of the bioactive components originated from byproducts in food industry will also be reviewed.

Recent advancements in the application of non-thermal plasma technology for the seafood industry.

Non-thermal plasma (NTP) is one of the most promising minimal processing methods for the food industry. However up until recently there are limited studies which would report the application and effect of NTP on processed seafood. The objective of this review is to highlight the recent findings and advancements in the application of NTP within the fish and other seafood industry, including direct application of fresh and dried fish and seafood with as well as indirect application of plasma activated water and seafood industry wastewater purification. The article also summarizes the effect of plasma treatment on microbiological quality, physicochemical and sensory properties and oxidation rate of treated fish and seafood. NTP has high potential to be used within various fields of seafood industry. It is especially effective in treatment of dried seafood products, but the use of plasma activated water during various processing steps such as seafood washing could be also beneficial. Moreover NTP could also be used as a cost effective and environmentally friendly method for seafood wastewater purification.

ATPS: "Aqueous two-phase system" as the "answer to protein separation" for protein-processing food industry.

Every individual needs food for its nutritional value and flavor while the economic growth of a nation depends on a thriving profit-generating industry. The food industry caters to both needs in an efficient manner. Proteins can rightly be considered as the driving force behind the overwhelming success of this industry. However, purification of proteins is not an easy undertaking due to their intricate nature while presently employed procedures for this purpose, regrettably, are both costly, and labor- and time-intensive in addition to being unsettling on proteins structural conformity. ATPS has accumulated a lot of interest from the scientific community due to its mild operating conditions, high recovery yield, ease of scaling it up, and its cost-effective and environment friendly nature. This review tries to amass some accounts concerning the utility of ATPS for the separation and purification of proteins. Some auspicious clues in this regard can be witnessed along with a few loopholes which need to be addressed before this technique can truly demonstrate its potential vis-à-vis industrial protein purification. Overall, a polymer - salt (citrates in particular) ATPS with an added inert supplementary salt can be regarded as a better option for purifying proteins.

Emerging food processing technologies and factors impacting their industrial adoption.

Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, and level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical to ensure its commercial adoption.

Meat packaging solutions to current industry challenges: A review.

Many advances have occurred in the field of smart meat packaging, and the potential for these to be used as tools that respond to challenges faced by industry is exciting. Here, we review packaging solutions to several immediate concerns, encompassing dark cutting, purge and yield losses, product traceability and provenance, packaging durability, microbial spoilage and safety, colour stability, environmental impacts, and the preservation of eating quality. Different active and intelligent packaging approaches to each of these were identified and are discussed in terms of their usefulness - to processors, retailers and/or consumers. From this, it became apparent that prior to selecting a packaging solution, industry should first define their criteria for success (e.g. How much purge is too much? What is a reasonable shelf-life to facilitate product turnover? Is the customer willing to pay for this?), and understand that packaging is not the sole solution, but acts as part of a holistic response to these issues.

Recent trends in common chemical feed and food contaminants in Israel.

In February 2014 a new law was approved by the Israeli parliament, namely the Control of Animal Feed Law. The law intends to regulate the production and marketing of animal feed. In preparation for the law's implementation in 2017, we have assessed the current feed and food safety challenges in Israel in recent years in association with the presence of common undesirable contaminants in various common feed and food commodities. Tight collaboration between regulatory authorities and feed/food industry, enhanced feed and food quality monitoring, transparency of survey results and readily accessible and reliable information for the public about health hazards of chemical contaminants, will guarantee the safety and quality of food and feed.

Nutrient profiling for front of pack labelling: how to align logical consumer choice with improvement of products?

The primary goal of front of pack (FOP) labelling is to help consumers make healthier choices through communication. A secondary goal is to encourage producers to improve the nutritional composition of their products. Evidence has shown that (FOP) labelling can help consumers to make healthier food choices and has been an incentive for producers to improve product composition. As FOP labelling is seen as an important tool to improve food environments for public health purposes, the WHO supports initiatives of governments to implement an FOP labelling system. Based on the experiences of a wide range of countries over many years, possible success factors for such an FOP system have been defined, six of which are discussed in the present paper and used to evaluate the Dutch Choices Programme that was started in 2006. In the course of time a large number of producers joined the programme and the logo was recognised by more than 90 % of the consumers, but by 2016 the Dutch consumer organisation argued on the basis of their own research that a quarter of the consumers did not understand the colour coding of the logo and as a result the Dutch government decided to no longer support this logo and to introduce a nutrition app. The challenge that remains is to find a system that consumers understand well and that still encourages manufacturers of food to improve product composition. New technology-based data collecting initiatives might provide the right tools to develop such a system.

Nutrient profiling for regulatory purposes.

In this paper, I first provide definitions of nutrient profiling and of a nutrient profile model. I set out the purposes of nutrient profiling: both general and specific. I give two examples of nutrient profile models that have been developed for regulatory purposes by the Food Standards Agency (FSA) in the UK and the WHO for its European Region - the UK FSA/Ofcom and the WHO-Euro models - and compare the way the models are constructed and function, how they have been developed, the extent to which they have been tested and validated and their use in regulation. Finally I draw some conclusions about the future use of nutrient profiling for regulatory purposes. I argue that its full potential has yet to be realised and give some reasons why. I pose some urgent research questions with respect to nutrient profiling.

Uses of nutrient profiling to address public health needs: from regulation to reformulation.

Nutrient profiling (NP) models rate the nutritional quality of individual foods, based on their nutrient composition. Their goal is to identify nutrient-rich foods, generally defined as those that contain more nutrients than calories and are low in fat, sugar and salt. NP models have provided the scientific basis for evaluating nutrition and health claims and regulating marketing and advertising to children. The food industry has used NP methods to reformulate product portfolios. To help define what we mean by healthy foods, NP models need to be based on published nutrition standards, mandated serving sizes and open-source nutrient composition databases. Specifically, the development and testing of NP models for public health should follow the seven decision steps outlined by the European Food Safety Authority. Consistent with this scheme, the nutrient-rich food (NRF) family of indices was based on a variable number of qualifying nutrients (from six to fifteen) and on three disqualifying nutrients (saturated fat, added sugar, sodium). The selection of nutrients and daily reference amounts followed nutrient standards for the USA. The base of calculation was 418·4 kJ (100 kcal), in preference to 100 g, or serving sizes. The NRF algorithms, based on unweighted sums of percent daily values, subtracted negative (LIM) from positive (NRn) subscores (NRn - LIM). NRF model performance was tested with respect to energy density and independent measures of a healthy diet. Whereas past uses of NP modelling have been regulatory or educational, voluntary product reformulation by the food industry may have most impact on public health.

From the SAIN,LIM system to the SENS algorithm: a review of a French approach of nutrient profiling.

Nutrient profiling aims to classify or rank foods according to their nutritional composition to assist policies aimed at improving the nutritional quality of foods and diets. The present paper reviews a French approach of nutrient profiling by describing the SAIN,LIM system and its evolution from its early draft to the simplified nutrition labelling system (SENS) algorithm. Considered in 2010 by WHO as the 'French model' of nutrient profiling, SAIN,LIM classifies foods into four classes based on two scores: a nutrient density score (NDS) called SAIN and a score of nutrients to limit called LIM, and one threshold on each score. The system was first developed by the French Food Standard Agency in 2008 in response to the European regulation on nutrition and health claims (European Commission (EC) 1924/2006) to determine foods that may be eligible for bearing claims. Recently, the European regulation (EC 1169/2011) on the provision of food information to consumers allowed simplified nutrition labelling to facilitate consumer information and help them make fully informed choices. In that context, the SAIN,LIM was adapted to obtain the SENS algorithm, a system able to rank foods for simplified nutrition labelling. The implementation of the algorithm followed a step-by-step, systematic, transparent and logical process where shortcomings of the SAIN,LIM were addressed by integrating specificities of food categories in the SENS, reducing the number of nutrients, ordering the four classes and introducing European reference intakes. Through the French example, this review shows how an existing nutrient profiling system can be specifically adapted to support public health nutrition policies.

Progress towards elimination of trans-fatty acids in foods commonly consumed in four Latin American cities.

OBJECTIVE: To assess progress towards the elimination of trans-fatty acids (TFA) in foods after the 2008 Pan American Health Organization (PAHO) recommendation of virtual elimination of TFA in Latin America. DESIGN: A descriptive, comparative analysis of foods that were likely to contain TFA and were commonly consumed in four cities in Latin America. SETTING: San José (Costa Rica), Mexico City (Mexico), Rio de Janeiro (Brazil), Buenos Aires (Argentina). SUBJECTS: Foods from each city were sampled in 2011; TFA content was analysed using GC. TFA of selected foods was also monitored in 2016. RESULTS: In 2011-2016, there was a significant decrease in the content of TFA in the sampled foods across all sites, particularly in Buenos Aires (from 12·6-34·8 % range in 2011-2012 to nearly 0 % in 2015-2016). All sample products met the recommended levels of TFA content set by the PAHO. TFA were replaced with a mixture of saturated and unsaturated fats. CONCLUSIONS: Our results indicate a virtual elimination of TFA from major food sources in the cities studied. This could be due to a combination of factors, including recommendations by national and global public health authorities, voluntary and/or mandatory food reformulation made by the food industry.

Nutrient profiling for product reformulation: public health impact and benefits for the consumer.

The food industry holds great potential for driving consumers to adopt healthy food choices as (re)formulation of foods can improve the nutritional quality of these foods. Reformulation has been identified as a cost-effective intervention in addressing non-communicable diseases as it does not require significant alterations of consumer behaviour and dietary habits. Nutrient profiling (NP), the science of categorizing foods based on their nutrient composition, has emerged as an essential tool and is implemented through many different profiling systems to guide reformulation and other nutrition policies. NP systems should be adapted to their specific purposes as it is not possible to design one system that can equally address all policies and purposes, e.g. reformulation and labelling. The present paper discusses some of the key principles and specificities that underlie a NP system designed for reformulation with the example of the Nestlé nutritional profiling system. Furthermore, the impact of reformulation at the level of the food product, dietary intakes and public health are reviewed. Several studies showed that food and beverage reformulation, guided by a NP system, may be effective in improving population nutritional intakes and thereby its health status. In order to achieve its maximum potential and modify the food environment in a beneficial manner, reformulation should be implemented by the entire food sector. Multi-stakeholder partnerships including governments, food industry, retailers and consumer associations that will state concrete time-bound objectives accompanied by an independent monitoring system are the potential solution.

The use of exergetic indicators in the food industry - A review.

Assessment of sustainability will become more relevant for the food industry in the years to come. Analysis based on exergy, including the use of exergetic indicators and Grassmann diagrams, is a useful tool for the quantitative and qualitative assessment of the efficiency of industrial food chains. In this paper, we review the methodology of exergy analysis and the exergetic indicators that are most appropriate for use in the food industry. The challenges of applying exergy analysis in industrial food chains and the specific features of food processes are also discussed.

The Future of Infant and Young Children's Food: Food Supply/Manufacturing and Human Health Challenges in the 21st Century.

Infant food and weaning practices are highly debated with lots of unanswered questions. It is becoming more apparent that early-life feeding may have an effect on the long-term health of humans, particularly for noncommunicable diseases such as obesity and allergic diseases. It is important to understand how environmental influences in early life can affect the development of the immune system and metabolic profiling. In terms of nutrition and diet, one should consider the role of the total/whole diet, as well as particular nutrients in the development of noncommunicable diseases. Providing the appropriate nutrition for infants during the weaning age needs to address factors such as the microbial load of the food, nutrient composition, presence/absence of allergens and appropriate textures. These factors are of importance irrespective of whether the food is homemade or produced commercially, and need to take environmental factors and food resources into account.

Approaches of the German food industry for addressing the issue of food losses.

In the food industry the subject of food losses is of great importance due to economic balance and an efficient application of resources as well as the development of an efficient food chain system. This paper presents the explorative results of a quantitative survey of leading companies of the German food industry to evaluate the relevance and handling of this issue. The investigation reveals that the topic food losses have a high significance in the food industry which will probably increase in future. A sample breakdown by branches indicates that the issue has the highest relevance for companies in the confectionery industry. These companies as well as those in the meat and fish industry want to consider the subject prospectively more powerful in their companies. Across the food industry, there is no communication to consumers of the efforts concerning food losses. And companies in the confectionery industry and in the fruit and vegetable industry rather want to engage more powerful in this topic if consumers' interest increases. But in order to minimize food losses at all stages along the supply chain, communication and collaboration at all stages is essential, especially the communication to consumers. Thus, it has to be verified whether a suitable communication can lead to advantages in competition and become an important issue for companies to differentiate from competitors.