Effect of pilot-scale UV-C light treatment assisted by mild heat on E. coli, L. plantarum and S. cerevisiae inactivation in clear and turbid fruit juices. Storage study of surviving populations.

Consumer growing demands for high-quality and safe food and beverages have stimulated the interest in alternative preservation technologies. Short-wavelength ultraviolet light (UV-C, 254 nm) has proven to be useful for the decontamination of a great variety of clear juices while improving their quality compared to traditional thermal treatments. Suspended solids and coloured compounds in turbid juices, diminish light transmission. The use of UV-C under a hurdle approach, may be a promising strategy for their treatment. The purpose of this study was to analyse Escherichia coli ATCC 25922, Saccharomyces cerevisiae KE 162 and Lactobacillus plantarum ATCC 8014 inactivation in clear pear juice (PJ), turbid orange-tangerine (OT) and orange-banana-mango-kiwi-strawberry (OBMKS) juices processed by single UV-C (390 mJ/cm2, 20 °C) and UV-C assisted by mild heat (UV-C/H, 50 °C) at pilot-scale in a coiled tubing unit and stored under refrigeration (5 °C). Inactivation studies were also conducted in peptone water (PW) and model solution (MS). The adequacy of the Coroller, Weibull and Biphasic Plus Shoulder models was studied. UV-C was highly effective in PW, MS and PJ, achieving up to 5.5-6.3-4.7, 4.8-5.1-4.6 and 4.4-5.5 log reductions for L. plantarum, E. coli,and S. cerevisiae, respectively. Whereas, a moderate inactivation by single UV-C was recorded in the turbid blends, reducing up to 2.4-3.8-1.6 and 3.6-3.7-1.3 log-cycles in OT and OBMKS, respectively. When the UV-C/H treatment was applied, high bacterial inactivation was observed achieving 5.2-5.6, 6.3-6.6 and 5.5-6.7 log reductions in OT, OBMKS and PJ, respectively, while 4.6-4.9 log reductions were determined for the yeast in OBMKS and OT, respectively. Thus, additive inactivation effects between UV-C and H were observed. All the models tested gave useful information regarding the existence of microbial subpopulations with varying resistances. However, the cumulative Weibull distribution function was the most versatile one, fitting inactivation curves with different shapes. Additionally, the frequency distributions of resistances showed that UV-C/H not only increased the UV-C microbicidal effect but changed the distribution of inactivation times. Principal component analysis revealed that UV-C effectiveness was associated to low particle size, a⃰, turbidity and high UV-C transmittance. An increase on the inactivation of treated bacterial populations was recorded along storage, while no yeast recovery was observed, thus emphasizing the contribution of refrigerated storage to microbial inactivation. Microbial inactivation in clear and turbid juices achieved by UV-C (390 mJ/cm2) assisted by mild heat (50 °C) and subsequent refrigerated storage may represent an useful alternative for multiple applications in the juice industry.

Antibacterial efficacy of 405, 460 and 520 nm light emitting diodes on Lactobacillus plantarum, Staphylococcus aureus and Vibrio parahaemolyticus.

AIMS: Little information is available on a direct comparison of the antibacterial efficacy of light emitting diode (LEDs) of different peak wavelengths. Thus, the objective of this study was to evaluate the effect of LEDs of three different wavelengths on bacterial inactivation. METHODS AND RESULTS: Lactobacillus plantarum, Staphylococcus aureus and Vibrio parahaemolyticus were illuminated with 405, 460 and 520 nm LEDs at 4, 10 and 25°C respectively. Inactivation curves were plotted and fitted using Gompertz Model. Illumination with 405 and 460 nm LED produced significant inactivation (P < 0·05) in the population of V. parahaemolyticus (>4 log) while Lact. plantarum and Staph. aureus showed relatively less susceptibility to the LED illumination. The 520 nm LED produced negligible inactivation. CONCLUSIONS: The 405 and 460 nm LEDs proved more effective in inactivating the selected foodborne bacteria in this study compared to 520 nm LED. The 405 nm LED showed the greatest antibacterial effect at the same level of energy dose. SIGNIFICANCE AND IMPACT OF THE STUDY: The results in this study demonstrated the antibacterial efficacy of 405 nm LED on Lact. plantarum and V. parahaemolyticus, suggesting its potential for use in food industry for the control of these micro-organisms.

Screening of Lactobacillus strains for their ability to bind benzo(a)pyrene and the mechanism of the process.

In order to investigate the binding ability of Lactobacillus strains to Benzo(a)pyrene (BaP), 15 strains were analysed. L. plantarum CICC 22135 and L. pentosus CICC 23163 exhibited high efficiency in removing BaP from aqueous medium; the binding rates were 66.76% and 64.31%, respectively. This process was affected by temperature, incubation time and pH, and cell viability was not necessary for the binding ability. Additionally, both strains, especially strain CICC 23163 showed high specificity in binding BaP. The cell-BaP complexes were stable in aqueous medium. The mechanism of binding was investigated by examining the binding ability of different components of the microorganism cells. The results revealed that peptidoglycans played an important role in binding BaP and its structural integrity was required. Consequently, we proposed that the mechanism of this process was a physisorption and peptidoglycan was the main binding site. These two strains may be used for dietary detoxification in human diet and animal feed.

Inactivation of the ftsH gene of Lactobacillus plantarum WCFS1: effects on growth, stress tolerance, cell surface properties and biofilm formation.

FtsH proteins are ubiquitous membrane-bound, ATP-dependent metalloproteases of the AAA family. In eubacteria, FtsH is involved in protein quality control under stress conditions. Lactobacillus plantarum is a widespread lactic acid bacterium that is encountered in several fermented food, including dairy products, vegetables and meat. In the present work the expression of the ftsH gene of L. plantarum was studied by quantitative real time RT-PCR in bacterial cultures subjected to various abiotic stresses. Both oxidative stress and addition of a membrane-fluidizing agent induced ftsH transcription, while a depletion of carbon-source repressed its mRNA level. Mutants deprived of the FtsH protease exhibited remarkable sensitivity to elevated temperature and increased salt concentration; conversely, overexpression of ftsH resulted in increased thermotolerance and resistance to salt. FtsH mutant had a reduced capacity to form biofilms on abiotic surfaces and exhibited different cell surface physico-chemical properties with respect to the wild type strain.

Thermal, chemical, and photocatalytic inactivation of Lactobacillus plantarum bacteriophages.

The effect of several biocides, thermal treatments, and photocatalysis on the viability of four Lactobacillus plantarum phages was investigated. Times to achieve 99% inactivation (T99) of phages at 63, 72, and 90 degrees C were evaluated in four suspension media: deMan Rogosa Sharpe broth, reconstituted skim milk, a commercial EM-glucose medium, and Tris magnesium gelatin buffer. The four phages studied were highly resistant to 63 degrees C (T99 > 45 min); however, counts < 10 PFU/ml were achieved by heating at 90 degrees C for 5 min. Higher thermal resistance at 72 degrees C was observed when reconstituted skim milk and EM-glucose medium were assayed. Peracetic acid (0.15%, vol/vol) was an effective biocide for the complete inactivation of all phages studied within 5 min of exposure. Sodium hypochlorite (800 ppm) inactivated the phages completely within 30 min. Ethanol (100%) did not destroy phage particles even after 45 min. Isopropanol did not have any effect on phage viability. Phage counts < 50 PFU/ml were obtained within 180 min of photocatalytic treatment. The results obtained in this work are important for establishing adequate methods for inactivating phages in industrial plants and laboratory environments.

Inactivation of Lactobacillus plantarum in apple cider, using radio frequency electric fields.

Radio frequency electric fields (RFEF) nonthermal processing effectively inactivates gram-negative bacteria in juices, but has yet to be shown effective at reducing gram-positive bacteria. Apple cider containing Lactobacillus plantarum ATCC 49445, a gram-positive bacterium, was RFEF processed under the following conditions: field strength of 0.15 to 15 kV/cm, temperature of 45 to 55 degrees C, frequency of 5 to 65 kHz, treatment time of 170 micros, and holding time of 5 to 50 s. The effect of refrigerating the inoculated cider prior to processing, the extent of sublethal injury, and the effect of storing the treated cider for 35 days were investigated. The population of L. plantarum was reduced by 1.0 log at 15 kV/cm, 20 kHz, and 50 degrees C, with a 5-s hold time. There is a synergistic effect between RFEF and heat above 50 degrees C. Inactivation significantly (P < 0.05) increased as frequency was decreased from 65 to 5 kHz. Inactivation increased linearly with field above 8 kV/cm. Holding cider at 55 degrees C after RFEF treatment for 5 and 50 s resulted in 2.5- and 3.1-log reductions, respectively. The surviving population was composed of 1.4-log sublethally injured cells. Storing processed cider at 4 degrees C for 35 days steadily and significantly (P < 0.05) reduced L. plantarum from 4.5 to 0.9 log CFU/ml. The electrical energy density was 51 J/ml. This provides the first evidence that nonthermal RFEF processing inactivates gram-positive bacteria, and that surviving cells may die off during refrigerated storage.

Exploring the use of natural antimicrobial agents and pulsed electric fields to control spoilage bacteria during a beer production process.

Different natural antimicrobials affected viability of bacterial contaminants isolated at critical steps during a beer production process. In the presence of 1 mg/ml chitosan and 0.3 mg/ml hops, the viability of Escherichia coli in an all malt barley extract wort could be reduced to 0.7 and 0.1% respectively after 2 hour- incubation at 4 degrees C. The addition of 0.0002 mg/ml nisin, 0.1 mg/ml chitosan or 0.3 mg/ml hops, selectively inhibited growth of Pediococcus sp. in more than 10,000 times with respect to brewing yeast in a mixed culture. In the presence of 0.1 mg ml chitosan in beer, no viable cells of the thermoresistant strain Bacillus megaterium were detected. Nisin, chitosan and hops increased microbiological stability during storage of a local commercial beer inoculated with Lactobacillus plantarum or Pediococcus sp. isolated from wort. Pulsed Electric Field (PEF) (8 kV/cm, 3 pulses) application enhanced antibacterial activity of nisin and hops but not that of chitosan. The results herein obtained suggest that the use of these antimicrobial compounds in isolation or in combination with PEF would be effective to control bacterial contamination during beer production and storage.

Exploring the use of natural antimicrobial agents and pulsed electric fields to control spoilage bacteria during a beer production process / Exploración del uso de agentes antimicrobianos naturales y de campos eléctricos pulsantes para el control de bacterias contaminantes durante el proceso de elaboración de cerveza

Different natural antimicrobials affected viability of bacterial contaminants isolated at critical steps during a beer production process. In the presence of 1 mg/ml chitosan and 0.3 mg/ml hops, the viability of Escherichia coli in an all malt barley extract wort could be reduced to 0.7 and 0.1% respectively after 2 hour- incubation at 4 °C. The addition of 0.0002 mg/ml nisin, 0.1 mg/ml chitosan or 0.3 mg/ml hops, selectively inhibited growth of Pediococcus sp. in more than 10,000 times with respect to brewing yeast in a mixed culture. In the presence of 0.1mg ml chitosan in beer, no viable cells of the thermoresistant strain Bacillus megaterium were detected. Nisin, chitosan and hops increased microbiological stability during storage of a local commercial beer inoculated with Lactobacillus plantarum or Pediococcus sp. isolated from wort. Pulsed Electric Field (PEF) (8 kV/cm, 3 pulses) application enhanced antibacterial activity of nisin and hops but not that of chitosan. The results herein obtained suggest that the use of these antimicrobial compounds in isolation or in combination with PEF would be effective to control bacterial contamination during beer production and storage.

Diferentes antimicrobianos naturales disminuyeron la viabilidad de bacterias contaminantes aisladas en etapas críticas del proceso de producción de cerveza. En un extracto de malta, el agregado de 1 mg/ml de quitosano y de 0,3 mg ml de lúpulo permitió reducir la viabilidad de Escherichia coli a 0,7 y 0,1%, respectivamente, al cabo de 2 horas de incubación a 4 °C. El agregado de 0,0002 mg/ml de nisina, 0,1 mg/ml de quitosano o de 0,3 mg/ml de lúpulo inhibió selectivamente (10.000 veces más) el crecimiento de Pediococcus sp. respecto de la levadura de cerveza en un cultivo mixto. El agregado de 0,1 mg/ml de quitosano permitió disminuir la viabilidad de una cepa bacteriana termorresistente, Bacillus megaterium, hasta niveles no detectables. Por otra parte, el agregado de nisina, quitosano y lúpulo aumentó la estabilidad microbiológica durante el almacenamiento de cervezas inoculadas con Lactobacillus plantarum y Pediococcus sp. aislados de mosto de cerveza. La aplicación de campos eléctricos pulsantes (CEP) (3 pulsos de 8kV/cm) aumentó el efecto antimicrobiano de la nisina y del lúpulo, pero no el del quitosano. Los resultados obtenidos indicarían que el uso de antimicrobianos naturales en forma individual o en combinación con CEP puede constituir un procedimiento efectivo para el control de la contaminación bacteriana durante el proceso de elaboración y almacenamiento de la cerveza.