Study on the Effect of Emulsifiers on the Properties of Oleogels Based on Olive Oil Containing Lidocaine.

Oleogels are semi-solid materials that consist primarily of liquid oil immobilized in a network of organized structural molecules, which provide stability and maintain the oil in the desired shape. Due to their structure, oleogels can stabilize large amounts of liquid, making them excellent carriers for active substances, both lipophilic and hydrophilic. This study presents the synthesis methodology and investigations of olive oil-based oleogels, which are among the healthiest and most valuable vegetable fats, rich in unsaturated fatty acids and antioxidants such as vitamin E. Two types of surfactants were used: TWEEN 80, which lowers surface tension and stabilizes emulsions, and SPAN 80, which acts in oil-dominated phases. The oleogels were enriched with lidocaine, an active substance commonly used as a pain reliever and local anesthetic. This research characterized the obtained oleogels regarding their medical applications, paying particular attention to the influence of surfactant type and amount as well as the active substance on their physicochemical properties. Structural analyses were also conducted using Fourier transform infrared (FTIR) spectroscopy, alongside rheological and sorption studies, and the wettability of the materials was evaluated. The stability of the obtained oleogels was verified using the MultiScan MS20 system, allowing for an assessment of their potential suitability for long-term pharmaceutical applications. The results indicated that SPAN-stabilized oleogels exhibited better stability and favorable mechanical properties, making them promising candidates for medical applications, particularly in pain relief formulations.

Cupric ion coordination-mediated molecularly imprinted electrochemical sensor for the recognition and ratiometric detection of lidocaine.

Molecularly imprinted polymers (MIPs) have been widely used as artificial recognition elements in sensing applications. However, their electrochemical sensing performance is generally hampered by limited affinity and uncontrolled condition change. In this work, a novel MIP electrochemical sensor based on metal coordination interaction was prepared and used for the recognition and ratiometric detection of lidocaine (LC). The sensor was constructed by electrodepositing Cu-coordinated MIP on biomass carbon modified glassy carbon electrode. Herein, Cu2+ ions acted as anchor for the immobilization of LC during the synthesis process, enabling the orderly formation of molecular recognition sites. Reversely, the metal coordination between Cu2+ ions and LC molecules facilitated the recognition of LC. Moreover, the doped cupric ions in the polymer film could provide a reference signal for subsequent ratiometric strategy. Thus the resulting sensor exhibited high selectivity, sensitivity, satisfactory reproducibility, and anti-interference ability. Under the selected conditions, the peak current ratio of LC and cupric ion was linear to LC concentration in the range of 0.008-2.5 µmol L-1 (R2 = 0.9951), and the limit of detection was 1.9 nmol L-1 (S/N = 3). The practical feasibility of the sensor was evaluated by detecting human serum and pharmaceutical samples, and satisfactory outcomes were obtained.

Using polycaprolactone and sodium alginate to prepare self-pumping/super-absorbent/transportable drug dressings for stage 3-4 pressure ulcer treatment.

Pressure ulcer dressings with different functions can enhance wound healing ability to varying degrees; however, pressure ulcer dressings that integrate various functions and break the resistance of bacteria to traditional antibiotics have not been widely studied. We proposed a self-pumping/super-absorbent/transportable drug dressing (PLD-SLD), polycaprolactone (PCL)/sodium alginate (SA) was used to load platelet-derived growth factor (PDGF) and lidocaine hydrochloride (LID) by Janus electrospinning and self-assembly technology, and Ɛ-polylysine was used as a biological bacteriostatic agent to prepare a multi-layer dressing. SEM showed that the dressing had a fluffy structure. The dressing can pump the exudate to the SA layer away from the skin. The swelling ratio reached 1378.667 ± 44.752 %. Coagulate blood in 5 min. On the 8th day, the unclosed area rate of the PLD-SLD dressing group was 16.112 ± 0.088 % lower than that of the model group. Importantly, the dressing can induce the expression of CD31, VEGF, α-SMA, and reduce the expression of CD68, thereby giving priority to wound healing. There was no scar formation after healing. In this study, a new dressing preparation method was proposed for the problems of exudate management, infection control, pain relief and healing promotion of stage 3-4 pressure ulcer healing.

Diffusion doping of analgesics into UHMWPE for prophylactic pain management.

Pain management after total joint arthroplasty is often addressed by systemic delivery of opioids. Local delivery of non-opioid analgesic drugs directly in the joint space from the UHMWPE component of the prosthesis would be highly beneficial to increase the efficacy of the drugs, decreasing the overall side effects and the risk of opioid addiction. It has been shown that effective concentrations of local analgesics can be achieved by eluting from analgesic-blended UHMWPE; however, this approach is limited by the decrease in mechanical properties resulting from the extent of phase separation of the blended drugs from the polymeric matrix. Here we hypothesized that mechanical properties could be maintained by incorporating analgesics into solid form UHMWPE by diffusion as an alternative method. Lidocaine or bupivacaine were diffused in solid form UHMWPE with or without radiation crosslinking. The loaded drug content, the spatial distribution of the drugs and their chemical stability after doping were characterized by FTIR and NMR spectroscopy, respectively. Drug release kinetics, tensile mechanical properties and wear rates were assessed. The results showed that diffusion doping could be used as a promising method to obtain a therapeutic implant material without compromising its mechanical and structural integrity.

Lidocaine HCl-Loaded Polyelectrolyte Complex -Poloxamer Thermoresponsive Hydrogel: In Vitro- In Vivo Anesthetic Evaluations for Tooth Socket Wound Delivery.

Local anesthesia is essential in dental practices, particularly for managing pain in tooth socket wounds, yet improving drug delivery systems remains a significant challenge. This study explored the physicochemical characteristics of lidocaine hydrochloride (LH) incorporated into a polyelectrolyte complex and poloxamer thermosensitivity hydrogel, assessing its local anesthetic efficacy in mouse models and its onset and duration of action as topical anesthetics in clinical trials. The thermoresponsive hydrogel exhibited a rapid phase transition within 1-3 minutes and demonstrated pseudo-plastic flow behavior. Its release kinetics followed Korsmeyer-Peppas, with 50% of biodegradation occurring over 48 h. In mouse models, certain thermogels showed superior anesthetic effects, with rapid onset and prolonged action, as evidenced by heat tolerance in tail-flick and hot plate models. In clinical trials, the LH-loaded thermoresponsive hydrogel provided rapid numbness onset, with anesthesia (Ton) beginning at an average of 46.5 ± 22.5 seconds and lasting effectively (Teff) for 202.5 ± 41.0 seconds, ranging from 120 to 240 seconds, indicating sustained release. These results highlight the promising properties of these formulations: rapid onset, prolonged duration, mucoadhesion, biodegradability, and high anesthesia effectiveness. This study demonstrates the potential for advancing local anesthesia across various medical fields, emphasizing the synergy between material science and clinical applications to improve patient care and safety.

Evaluating the physico-chemical properties of water-based and 2% lidocaine hydrochloride-based aluminum-free glass polyalkenoate cements for distal radius fixation.

Lidocaine hydrochloride is used as an anesthetic for clinical applications. This study considers the effects of the substitution of 2% lidocaine hydrochloride for deionized (DI) water on the rheological, mechanical, ion release, pH and injectable properties of two formulations of aluminum-free glass polyalkenoate cements (GPCs) using two distinct poly(acrylic) acids (PAA), E9 and E11, which have different molecular weights (Mw). The substitution of 2% lidocaine hydrochloride demonstrated increased injectability, but did not affect mechanical properties. The mechanical properties increased with time, as expected, and, in general, E9-based GPCs displayed significantly higher strengths over E11-based GPCs. With respect to ion release, which includes calcium (Ca), strontium (Sr), zinc (Zn) and silicon (Si); all ions displayed a steady and consistent increased release over time. Ca and Sr showed similar ion release patterns, whereby the GPC made with E11 PAA and lidocaine hydrochloride released significantly more ions than all other compositions likely due to similar chemical kinetics. However, Zn is also divalent in nature, but displayed only one significant difference across the GPC series at all time points, which was attributed to its higher electronegativity allowing for increased participation in the setting reaction. Finally, an analysis of the pH confirmed an increase in pH with time, suggesting that H+ ions were attacking the glass structure to allow for ion release. After 1 and 7 days, water-based GPCs environments achieved a higher pH than lidocaine hydrochloride-based GPCs, indicating that the lidocaine hydrochloride may be releasing additional protons upon bond formation with PAA.

Study of the preparation, characterization, and solubility of lidocaine complexed with 5-sulfosalicylic acid dihydrate.

OBJECTIVE: This study was to prepare solid dispersions of lidocaine (Lid) with 5-sulfosalicylic acid dihydrate (SSA) by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1) and to evaluate their physical properties. METHODS: Here, we evaluated the physicochemical properties and solubility of solid dispersions of Lid and SSA prepared by freeze-drying (freeze-dried [FD] Lid/SSA = 1/1). RESULTS: Differential scanning calorimetry measurements showed that after freeze-drying, the endothermic peak due to Lid melting, the dehydration peak, and the endothermic peak due to SSA melting disappeared. Powder X-ray diffraction results showed that the characteristic Lid and SSA peaks disappeared after freeze-drying, indicating a halo pattern. The near-infrared spectroscopy results suggested that Lid-derived -NH and -CH groups and the Lid-derived -OH and -CH groups from the SSA peak shifted and broadened after freeze-drying, suggesting their involvement in complex formation through Lid/SSA intermolecular interactions. Nuclear Overhauser effect spectroscopy-nuclear magnetic resonance (NMR) measurements showed a cross-peak due to the interaction between the Lid-derived -CH group and the SSA-derived -OH group, suggesting hydrogen bonding. Diffusion-ordered spectroscopy NMR measurements showed that the diffusion coefficients of Lid and SSA aggregated in FD Lid/SSA, suggesting a change in Lid dispersibility in the solvent owing to the formation of a complex with SSA. The solubility of FD Lid/SSA was approximately 88 mg/mL (∼20-fold higher than that of Lid). CONCLUSIONS: These findings suggest that complex formation occurred in FD Lid/SSA; this enhanced the solubility of this dispersion.

Inula helenium extract and lidocaine-loaded electrospun wound dressings for managing skin wounds pain and their healing: An in vitro and in vivo study.

The skin injuries pose a substantial public health challenge, not only due to their physical trauma but also the accompanying pain and complexities in wound healing. In the current research, Inula helenium extract and lidocaine were loaded into electrospun PVA/calcium alginate nanofibers to promote skin wounds healing and alleviate the resulting pain. Various in vitro experiments were utilized to characterize these dressings. Wound healing potential of these constructs and their analgesic effects were studied in a rat model of skin wounds. Our developed scaffolds released the loaded drugs in a slow manner and showed antioxidative and anti-inflammatory activities. Fiber size measurement showed that drug-loaded and drug-free scaffolds had around 418.025 ± 140.11 nm and 505.51 ± 93.29 nm mean fiber size, respectively. Bacterial penetration assay confirmed that drug-loaded scaffolds reduced bacterial infiltration through the matrices. Wound healing study showed that on day 14th, the dressings loaded with inula helenium extract and lidocaine could close the wounds up to 91.26 ± 5.93%. In addition, these scaffolds significantly reduced the animals pain sensitivity. ELISA assay results implied that these dressings modulated inflammation and reduced tissue's oxidative stress.

In situ pain relief during photodynamic therapy by ROS-responsive nanomicelle through blocking VGSC.

Pain in photodynamic therapy (PDT), resulting from the stimulation of reactive oxygen species (ROS) and local acute inflammation, is a primary side effect of PDT that often leads to treatment interruption or termination, significantly compromising the efficacy of PDT and posing an enduring challenge for clinical practice. Herein, a ROS-responsive nanomicelle, poly(ethylene glycol)-b-poly(propylene sulphide) (PEG-PPS) encapsulated Ce6 and Lidocaine (LC), (ESCL) was used to address these problems. The tumor preferentially accumulated micelles could realize enhanced PDT effect, as well as in situ quickly release LC due to its ROS generation ability after light irradiation, which owes to the ROS-responsive property of PSS. In addition, PSS can suppress inflammatory pain which is one of the mechanisms of PDT induced pain. High LC-loaded efficiency (94.56 %) owing to the presence of the thioether bond of the PPS made an additional pain relief by inhibiting excessive inflammation besides blocking voltage-gated sodium channels (VGSC). Moreover, the anti-angiogenic effect of LC offers further therapeutic effects of PDT. The in vitro and in vivo anti-tumor results revealed significant PDT efficacy. The signals of the sciatic nerve in mice were measured by electrophysiological study to evaluate the pain relief, results showed that the relative integral area of neural signals in ESCL-treated mice decreased by 49.90 % compared to the micelles without loaded LC. Therefore, our study not only develops a very simple but effective tumor treatment PDT and in situ pain relief strategy during PDT, but also provides a quantitative pain evaluation method.

Improvement of lidocaine skin permeation by using passive and active enhancer methods.

Lidocaine is generally recognized and preferred for local anaesthesia, but in addition, studies have described additional benefits of lidocaine in cancer therapy, inflammation reduction, and wound healing. These properties contribute to its increasing importance in dermatological applications, and not only in pain relief but also in other potential therapeutic outcomes. Therefore, the purpose of our study was to enhance lidocaine delivery through the skin. A stable nanostructured lipid carrier (NLC), as a passive permeation enhancer, was developed using a 23 full factorial design. The nanosystems were characterized by crystallinity behaviour, particle size, zeta potential, encapsulation efficiency measurements, and one of them was selected for further investigation. Then, NLC gel was formulated for dermal application and compared to a traditional dermal ointment in terms of physicochemical (rheological behaviour) and biopharmaceutical (qualitative Franz diffusion and quantitative Raman investigations) properties. The study also examined the use of 3D printed solid microneedles as active permeation enhancers for these systems, offering a minimally invasive approach to enhance transdermal drug delivery. By actively facilitating drug permeation through the skin, microneedles can complement the passive transport achieved by NLCs, thereby providing an innovative and synergistic approach to improving lidocaine delivery.

Innovative Use of an Injectable, Self-Healing Drug-Loaded Pectin-Based Hydrogel for Micro- and Supermicro-Vascular Anastomoses.

Microvascular surgery plays a crucial role in reconnecting micrometer-scale vessel ends. Suturing remains the gold standard technique for small vessels; however, suturing the collapsed lumen of microvessels is challenging and time-consuming, with the risk of misplaced sutures leading to failure. Although multiple solutions have been reported, the emphasis has predominantly been on resolving challenges related to arteries rather than veins, and none has proven superior. In this study, we introduce an innovative solution to address these challenges through the development of an injectable lidocaine-loaded pectin hydrogel by using computational and experimental methods. To understand the extent of interactions between the drug and the pectin chain, molecular dynamics (MD) simulations and quantum mechanics (QM) calculations were conducted in the first step of the research. Then, a series of experimental studies were designed to prepare lidocaine-loaded injectable pectin-based hydrogels, and their characterization was performed by using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and rheological analysis. After all the results were evaluated, the drug-loaded pectin-based hydrogel exhibiting self-healing properties was selected as a potential candidate for in vivo studies to determine its performance during operation. In this context, the hydrogel was injected into the divided vessel ends and perivascular area, allowing for direct suturing through the gel matrix. While our hydrogel effectively prevented vasospasm and facilitated micro- and supermicro-vascular anastomoses, it was noted that it did not cause significant changes in late-stage imaging and histopathological analysis up to 6 months. We strongly believe that pectin-based hydrogel potentially enhanced microlevel arterial, lymphatic, and particularly venous anastomoses.

Topical drug delivery by Sepineo P600 emulgel: Relationship between rheology, physical stability, and formulation performance.

The objective of this present work was to develop and optimize oil-in-water (O/W) emulsion-based gels, namely emulgels that allow maximum topical drug delivery while having desired microstructure and acceptable physical stability. Emulgels containing 2.0 wt% lidocaine were prepared using various concentrations (0.75-5.0 wt%) of Sepineo P600. Their droplet size distribution, physical stability, rheological behaviors, in vitro drug release, and skin permeation profiles were evaluated. Results show that the concentration of Sepineo P600 significantly influenced the microstructure, rheology, and physical stability of the emulgel formulations. The physico-chemical properties also reveals that at least 1.0 wt% Sepineo P600 was needed to produce stable emulgel formulations. All formulations exhibited non-Newtonian shear-thinning properties which are desirable for topical applications. Both the release and permeation rates decreased with increasing viscosity and rigidity of the formulation. The lower the complex modulus of the emulgels, the higher the steady-state flux of the drug through the skin. Adding Sepineo P600 to emulgel systems resulted in increased rheological properties, which in turn slowed the diffusion of the drug for in vitro release. Although as expected skin permeation was rate limiting since in vitro release was 3 to 4 log-fold faster than skin flux. However, an interesting finding was that the derived skin/vehicle partition coefficient suggested the ionic interaction between lidocaine and Sepineo polymer reducing the free drug, i.e., thermodynamic activity and hence the flux with increasing Sepineo P600 concentration. Overall, this study has provided us with valuable insights into understanding the relationship between the microstructure (rheology), physical stability and skin drug delivery properties which will help to design and optimize topical emulgel formulations.

Towards a greater understanding of the deep eutectic phenomenon through examination of the lidocaine-NSAID therapeutic deep eutectic systems.

Therapeutic deep eutectic solvents (THEDES) have been attracting increasing attention in the pharmaceutical literature as a promising enabling technology capable of improving physicochemical and biopharmaceutical properties for difficult-to-deliver drug compounds. The current literature has explored amide local anaesthetics and carboxylic acid nonsteroidal anti-inflammatories (NSAIDs) as commonly used THEDES formers for their active hydrogen-bonding functionality. However, little is known about what happens within the "deep eutectic" region where a range of binary compositions present simply as a liquid with no melting events detectable across experimentally achievable conditions. There is also very limited understanding of how parent compounds' physicochemical properties could impact upon the formation, interaction mechanism, and stability of the formed liquid systems, despite the significance of these information in dose adjustment, industrial handling, and scaling-up of these liquids. In the current work, we probed the "deep eutectic" phenomenon by investigating the formation and physicochemical behaviours of some chosen lidocaine-NSAID systems across a wide range of composition ratios. Our data revealed that successfully formed THEDES exhibited composition dependent Tg variations with strong positive deviations from predicted Tg values using the Gordon-Taylor theory, suggesting substantial interactions within the formed supramolecular structure. Interestingly, it was found that the parent compound's glass forming ability had a noticeable impact upon such profound interaction and hence could dictate the success of THEDES formation. It has also been confirmed that all successful systems were formed based on charge-assisted hydrogen bonding within their THEDES network, affirming the significant role of partial protonisation on achieving a profound melting point depression. More importantly, the work found that within the "deep eutectic" region there was still an ideal, or thermodynamically preferrable "THEDES point", which would exhibit excellent stability upon exposure to stress storage conditions. The discoveries of this study bring the literature one step closer to fully understanding the "therapeutic deep eutectic" phenomenon. Through correlation between parent reagents' physicochemical properties and the synthesised products' characteristics, we establish a more educated process for the prediction and engineering of THEDES.

Discovery of a Novel Lidocaine Metabolite by Human Liver Microsome and Identification of Microbial Species Which Produces the Same Metabolite.

Preparation of drug metabolites at the milligram scale is essential for determining the structure and toxicity of drug metabolites. However, their preparation using recombinant proteins and human liver microsomes (HLM) is often difficult because of technical and ethical issues. Reproducing human drug metabolism in food-derived microorganisms may be useful for overcoming these challenges. In this study, we identified an unknown metabolite of the anaesthetic drug lidocaine, which is metabolised by HLM. By screening for lidocaine metabolic activity in five types of foods (blue cheese, shiitake mushroom, natto, yoghurt, and dry yeast), we found that bacteria isolated from natto reproduced the lidocaine metabolic reaction that occurs in HLM. A fraction containing the unknown lidocaine metabolite was prepared through mass cultivation of a Bacillus subtilis standard strain, ethyl acetate extraction, open column chromatography, and HPLC purification. We identified the unknown metabolite as 3-(2,6-dimethylphenyl)-1-ethyl-2-methyl-4-imidazolidinone using NMR. Our results showed that food-derived microorganisms can produce large amounts of human drug metabolites via large-scale cultivation. Additionally, food microorganisms that can reproduce drug metabolism in humans can be used to examine drug metabolites at a low cost and without ethical issues.

A Bilayer Microneedle for Modulated Sequential Release of Adrenaline and Lidocaine for Prolonged Local Anesthesia.

Chronic pain emerges as a major global health issue, significantly impacting individuals' health and quality of life. In this study, we designed a bilayer microneedle loaded with lidocaine nanocomposites in the inner layer and adrenaline (Adr) in the outer layer (HCP MNs) for modulated sequential release to achieve prolonged local anesthesia. The obtained HCP MNs featured an intact structure with adequate mechanical strength for efficient skin penetration. The bilayer structure of MNs was evidenced by loading two fluorescent dyes in each layer. Furthermore, these HCP MNs were capable of inducing rapid as well as prolonged local anesthetic effects in guinea pigs. Hence, the bilayer MN coloaded with Adr and lidocaine nanocomposite serves as a promising transdermal delivery platform for chronic pain management.

An isocratic RP-HPLC-UV method for simultaneous quantification of tizanidine and lidocaine: application to in vitro release studies of a subcutaneous implant.

Implantable devices have been widely investigated to improve the treatment of multiple diseases. Even with low drug loadings, these devices can achieve effective delivery and increase patient compliance by minimizing potential side effects, consequently enhancing the quality of life of the patients. Moreover, multi-drug products are emerging in the pharmaceutical field, capable of treating more than one ailment concurrently. Therefore, a simple analytical method is essential for detecting and quantifying different analytes used in formulation development and evaluation. Here, we present, for the first time, an isocratic method for tizanidine hydrochloride (TZ) and lidocaine (LD) loaded into a subcutaneous implant, utilizing reversed-phase high-performance liquid chromatography (RP-HPLC) coupled with a UV detector. These implants have the potential to treat muscular spasticity while providing pain relief for several days after implantation. Chromatographic separation of the two drugs was accomplished using a C18 column, with a mobile phase consisting of 0.1% TFA in water and MeOH in a 58 : 42 ratio, flowing at 0.7 ml min-1. The method exhibited specificity and robustness, providing accurate and precise results. It displayed linearity within the range of 0.79 to 100 µg ml-1, with an R2 value of 1 for the simultaneous analysis of TZ and LD. The developed method demonstrated selectivity, offering limits of detection and quantification of 0.16 and 0.49 µg ml-1 for TZ, and 0.30 and 0.93 µg ml-1 for LD, respectively. Furthermore, the solution containing both TZ and LD proved stable under various storage conditions. While this study applied the method to assess an implant device, it has broader applicability for analysing and quantifying the in vitro drug release of TZ and LD from diverse dosage forms in preclinical settings.

A simple, fast, and cost-effective smartphone-based digital imaging method for quantification of lidocaine hydrochloride in pharmaceutical formulations.

OBJECTIVE: A simple, highly specific, accurate and fast method by smartphone-based digital imaging was developed for estimating lidocaine hydrochloride in pharmaceutical formulations. MATERIAL AND METHODS: To obtain the images, a Galaxy A03 Core smartphone and an image acquisition device developed in the laboratory were used to control the incident factors in reproducibility of the measurements. The processing of the images was carried out with the Color Grab application. Finally, the absorbance values were calculated using the RGB intensity values of blank, standard, and sample solutions. The proposed method was compared with spectroscopic and chromatographic methods. RESULTS: The reaction between copper and lidocaine hydrochloride was characterized, showing better results in an equimolar ratio and maintaining the pH of the solution above 11.5. The use of the device for the capture of digital images allowed to control those sensitive parameters for reproducibility so that the analytical measurements showed adequate precision and accuracy. Validation of the main parameters of the method showed compliance with acceptance criteria. The application of the method for the analysis of injectable samples achieved reliable results, which were statistically similar to other reference instrumental methods. CONCLUSION: The proposed method presented figures of merit in relation to linearity, precision, selectivity, accuracy, and robustness; it was carried out by designing and manufacturing a device for capturing digital images on a smartphone, which were analyzed to obtain RGB intensity values. These data are finally used to calculate absorbance values of solutions. All these elements provide this work with innovative characteristics in the field of analysis for control of pharmaceutical formulations.

Quantitative chromatographic method development for residual lidocaine in topical systems and biological samples.

Background: The aim of this work was to develop and validate sensitive and efficient analytical methods for estimating systemic drug exposure and residual drug following the application of topical delivery systems. Materials & methods: Lidocaine was extracted using a liquid-liquid extraction technique from commercial topical products and analyzed using ultra high-performance liquid chromatography. A separate LC-MS/MS method was developed for analyzing human serum samples. Results & conclusion: The developed methods were successfully applied for estimating lidocaine content in two commercial products demonstrating 97.4-104.0% for product A and 105.0-110.7% for product B. The LC-MS/MS method displayed successful analysis of lidocaine from human serum samples. The developed methods are recommended for quantifying systemic exposure and residual drug analysis of topical systems.

Nanoparticulate System Based on Calcium-Crosslinked Carbomer Retards Percutaneous Drug Permeation: New Insight Into Skin Barrier Functions.

BACKGROUND: The stratum corneum poses a formidable barrier for dermal and transdermal delivery of drugs. Besides the stratum corneum barrier, the viable epidermis poses another challenge to pharmaceutical formulators. A drug is probably transdermally permeable if it rapidly crosses the epidermal secondary barrier, while stimulation of lamellar body secretion from granular cells and intracellular release of Ca++ from endoplasmic reticulum (ER) result in retardation. OBJECTIVE: To evaluate the skin permeability of lidocaine HCl loaded in nanoparticles made of carbomer calcified with calcium gluconate, while figuring out the physiological mechanism that regulates the Ca++ related skin barrier function. METHODS: Lidocaine hydrochloride was loaded in a nanoparticulate system based on calcified carbomer, fabricated by using a water-in-oil microemulsion as a precursor. In vitro release and percutaneous permeation testing were carried out to compare between calcified and non-calcified nanoparticles. In addition, comparison was also made between calcified nanoparticles using carbomer gels prepared at two pH values and at two different ratios of Ca++/carbomer. RESULTS: A unique structure of the calcified nanoparticles has been proposed, in which the carbomer nanoparticles are partially coated by gluconate ions through hydrogen bonding and partially through ionic interactions with calcium ions. Although the in vitro release data showed no difference between non-calcified and calcified carbomer nanoparticles, a calcium-related phenomenon of skin retardation has been revealed. CONCLUSIONS: It has been proposed that stimulation of lamellar body secretion from granular cells and Ca++ release from ER, which is elicited by the calcium gluconate-coated nanoparticles, result in dermal retardation of lidocaine.

Impact of the Dicarboxylic Acid Chain Length on Intermolecular Interactions with Lidocaine.

Acid-base multicomponent systems have become a popular choice as a strategy to fine-tune the physicochemical properties of active pharmaceutical ingredients. Current prediction tools based on the principles of anticrystal engineering cannot always accurately predict the nature of intermolecular interactions within a multicomponent system. Even small changes in the physicochemical parameters of parent components can result in unexpected outcomes, and many salt, cocrystal, and ionic liquid forms are still being discovered empirically. In this work, we aimed to establish structural consistency in a series of mixtures comprising lidocaine (LID) with decanedioic, undecanedioic, dodecanedioic, and tridecanedioic acids and to explore how length and flexibility of the acid carbon backbone affect the molecular recognition, crystallization, and thermal behavior of the expected binary systems. We found that neat grinding of LID with dicarboxylic acids results in the formation of eutectic phases. The observed eutectic melting points deviated from the ideal eutectic temperatures predicted by the Schroeder van Laar model because of hydrogen bonding between the reacting components within the mixtures. Furthermore, thermal and infrared analysis provided evidence for the possible formation of new phases stemming from partial ionization of the counterions. Besides, the structure of a previously undetermined form I of the tridecanedioic acid was solved by single crystal X-ray diffraction.