Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Three-dimensional analysis of mandibular morphology asymmetry and temporomandibular joint position in patients with unilateral Brodie bite.

OBJECTIVE: Previous studies have shown unilateral posterior crossbite is associated with mandibular asymmetry in morphology and position. However, it remains unclear whether unilateral Brodie bite plays a similar role in mandibular development. Therefore, this study aims to investigate the morphological and positional symmetry of mandibles in patients with unilateral Brodie bite by three-dimensional anaylsis. METHODS: Fourteen patients with unilateral Brodie bite (mean age 18.43 ± 4.24 years) and fourteen sex- and age-matched patients with normal occlusion (mean age 18.07 ± 5.48 years) underwent cone-beam computed tomography (CBCT) scans. 3D surface mesh models of their mandibles were established using Mimics Research 19.0. The surface matching percentage was compared between the original and mirrored mandible by Geomagic Control X software. Furthermore, the dimension and position of the temporomandibular joint (TMJ) were determined for both groups using InVivoDental 5.0. RESULTS: For surface-to-surface deviation analysis, the percentage of mismatch in patients with unilateral Brodie bite was significantly higher than the control group at ±0.50 mm, ±0.75 mm, and ±1.00 mm tolerance (P < .001). In patients with unilateral Brodie syndrome, the condyles on the scissors-bite side showed a significantly more anterior position (P = .03), greater medial inclination (P < .01), and larger posterior TMJ space (P = .01) than the non-scissors-bite side. CONCLUSION: Patients with unilateral Brodie bite exhibit a more asymmetrical mandibular morphology, with a greater anterior condylar position and posterior joint space on the scissors-bite side, indicating that early diagnosis and treatment may be necessary for patients with unilateral Brodie bite.

The Role of Digital Surgical Planning and Surgical Guides in the Treatment of Unilateral Condylar Hyperplasia.

Unilateral condylar hyperplasia (UCH) results in facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Treatment consists of both surgical and orthodontic intervention. A review was performed for 4 patients with UCH who underwent digital surgical planning (DSP)-assisted condylectomy. All patients were female, aged 14 to 35 years at the time of operation with facial asymmetry and class III malocclusion. None of the patients had prior treatment and all had perioperative orthodontic appliances to provide fixation and postoperative elastic therapy. All patients underwent DSP-guided condylectomy, and intraoperative surgical cutting guides were used for 3 of the patients. All had significant improvement in facial symmetry and occlusion. None had recurrence, and additional intervention has not been required. If UCH is recognized before marked secondary changes in the maxilla, mandible, and occlusion, future orthognathic surgery may be potentially obviated. Craniomaxillofacial surgeons should consider using DSP and surgical guides in the treatment of UCH.

A pilot investigation of condylar position and asymmetry in patients with unilateral posterior scissors-bite malocclusion based on three-dimensional reconstructive imaging technique.

OBJECTIVE: Unilateral posterior scissors-bite (uPSB) malocclusion is common clinically. This study aimed to investigate the condylar morphological alterations and condyle-fossa relationship in patients with uPSB, through cone beam computed tomography (CBCT) and three-dimensional reconstructive imaging technique. METHODS: A retrospective study was designed to comparatively analyze 95 patients with uPSB between July 2016 and December 2021. They were divided into three subgroups: 12 to 20, 21 to 30, and ≥ 31 years, according the age distribution. The morphological parameters regarding condyle, fossa, and joint space after three-dimensional reconstruction were measured and analyzed by a series of digital software. SPSS 26.0 software package was performed for statistical analysis on data sets, using paired t-test, one-way analysis of variance, Wilcoxon signed-rank sun test, Kruskal-Wallis H test, and Bonferroni correction. RESULTS: The condylar volume (CV) of scissors-bite side was greater than that of the non-scissors-bite side (CV A = 1740.68 ± 559.80 mm3 > CV N = 1662.25 ± 524.88 mm3, P = 0.027). So was the condylar superficial area (CSA) (CSA A = 818.71 ± 186.82 mm2 > CSA N = 792.63 ± 173.44 mm2, P = 0.030), and the superior joint space (SJS) [SJS A = 2.46 (1.61, 3.68) mm) > SJS N = 2.01 (1.55, 2.87) mm), P = 0.018], and the anterior joint space (AJS) (AJS A = 3.94 ± 1.46 mm > AJS N = 3.57 ± 1.30 mm, P = 0.017). The constituent ratios of the different parts of the bilateral condyles were 23% on the posterior slope, 21% on the top, 20% on the anterior slope, 19% on the lateral slope and 17% on the medial slope, respectively. CONCLUSION: Due to long-term abnormal occlusion of uPSB, the pathological bite force in temporomandibular joint would cause changes in the shape of the condyle. Among them, CV, CSA, SJS and AJS had significant changes in the scissors-bite status, which has the greatest damage to the posterior slope of the condyloid process.

'Study of the maxillary yaw on cone beam computed tomography: A preliminary report and comparison between two different dento-skeletal malocclusions'.

OBJECTIVES: To assess the skeletal and dental maxillary transverse compensation (yaw) on the cone beam computed tomography (CBCT) three-dimensional reconstructed image of the skull in two groups of patients, both clinically affected by a class III malocclusion with deviation of the lower midline. MATERIALS AND METHODS: An observational retrospective study was designed to analyse differences in two groups of patients, the first one was composed by patients affected by horizontal condylar hyperplasia, the second one by patients affected by dento-skeletal asymmetric class III malocclusion. Each group was composed by 15 patients. Transverse analysis was performed by measuring five landmarks (three bilateral and two uneven) with respect to a mid-sagittal plane; sagittal analysis was performed by measuring the sagittal distance on the mid-sagittal plane between bilateral points. Means were compared through inferential analysis. RESULTS: In the condylar hyperplasia group, all differences between the two sides were not statistically significant, nor for canines' difference (P = .0817), for molars (P = .1105) or for jugular points (.05871). In the class III group, the differences between the two sides were statistically significant for molars (P = .0019) and jugular points (P = .0031) but not for canines (P = .1158). Comparing the two groups, significant differences were found only for incisors' midline deviation (P = .0343) and canine (P = .0177). CONCLUSION: The study of the yaw on CBCT should be integrated into three-dimensional cephalometry and could help in differentiating the various malocclusion patterns.

Palatal changes after treatment of functional posterior cross-bite using elastodontic appliances: a 3D imaging study using deviation analysis and surface-to-surface matching technique.

BACKGROUND: The present study aimed to evaluate the changes in palate dimension and morphology after treatment of functional posterior crossbite (FPXB) with elastodontic devices (EAs). METHODS: The treatment group (TG) consisted of 25 subjects (mean age 7.3 ± 0.9 years) who received treatment with EA for one year. The control group (CG) comprised 14 untreated subjects (mean age 6.8 ± 0.7 years). INCLUSION CRITERIA: intra-oral scan registered before (T0) and after treatment (T1), FPXB with a mandibular shift towards the crossbite site of ≥ 2 mm, class I molar relationship. EXCLUSION CRITERIA: missing teeth, anterior crossbite, temporomandibular disorders, previous orthodontic treatment, carious lesions, mobility of deciduous posterior teeth, craniofacial deformities. Digital models were analyzed to assess the inter-canine (ICW) and inter-molar widths (IMW) and the corresponding emi-lateral measurements (eICW and eIMW) using the median palatine plane as reference. According to a specific 3D imaging technology, the morphology and symmetry of the palate was investigated by analysing the 3D deviation between the two specular models of the palate. RESULTS: At T0, both groups showed a significantly narrower dimension of eICW and eIMW at the crossbite side compared to the non-crossbite side (p < 0.05). Also, the 3D deviation analysis demonstrates a limited matching percentage of the original/mirrored models in both TG (81.12%) and CG (79.36%), confirming the asymmetry of the palate. The area of mis-matching was located at the alveolar bone level. At T1, subjects in the TG showed a significant increment of ICW and IMW (p < 0.05), a reduction of the differences of eICW and eIMW between both sides (p < 0.05) and an increment of the percentage matching (TG = 92.32%) (p < 0.05), suggesting a significant recovery of the palatal asymmetry. No significant changes were found between T0 and T1 in the CG (p > 0.05). CONCLUSIONS: EAs could be successfully used to correct FPXB in mixed dentition and could restore the harmonious development of the palate in children.

The impact of mouth breathing on dentofacial development: A concise review.

Mouth breathing is one of the most common deleterious oral habits in children. It often results from upper airway obstruction, making the air enter completely or partially through oral cavity. In addition to nasal obstruction caused by various kinds of nasal diseases, the pathological hypertrophy of adenoids and/or tonsils is often the main etiologic factor of mouth breathing in children. Uncorrected mouth breathing can result in abnormal dental and maxillofacial development and affect the health of dentofacial system. Mouth breathers may present various types of growth patterns and malocclusion, depending on the exact etiology of mouth breathing. Furthermore, breathing through the oral cavity can negatively affect oral health, increasing the risk of caries and periodontal diseases. This review aims to provide a summary of recent publications with regard to the impact of mouth breathing on dentofacial development, describe their consistencies and differences, and briefly discuss potential reasons behind inconsistent findings.

MicroRNA-26b regulates BMSC osteogenic differentiation of TMJ subchondral bone through ß-catenin in osteoarthritis.

Temporomandibular joint osteoarthritis (TMJ-OA) is a degenerative disease of the joint. The early manifestations of TMJ-OA are abnormal remodeling of condylar subchondral bone. In bone tissue, bone marrow mesenchymal stem cells (BMSCs) and osteoblasts play important roles in the differentiation and maturation of most hematopoietic cells. MicroRNA-26b (miR-26b) is upregulated during the osteogenesis of BMSCs, and miR-26b overexpression leads to the activation of ß-catenin and the enhancement of osteogenesis and cartilage formation. However, the pathologic mechanism remains unclear. In the present study, we used a rat model with OA-like changes in the TMJ induced by experimental unilateral anterior crossbite (UAC) and found that the level of miR-26b was markedly lower in BMSCs from the subchondral bones of UAC rats than in those from sham control rats. MiR-26b overexpression by agomiR-26b increased condylar subchondral bone osteogenesis in UAC rats. Notably, although agomiR-26b primarily affected miR-26b levels in the subchondral bone (but not in cartilage or the synovium), the overexpression of miR-26b in BMSCs in UAC rats largely rescued OA-like cartilage degradation, while the inhibition of miR-26b in BMSCs exacerbated cartilage degradation in UAC rats. We measured the expression levels of ß-catenin and related osteogenic and osteoclastic factors after using miR-26b mimics and inhibitors in vivo. Moreover, BMSCs were treated with the ß-catenin blocker Wnt-C59 and then transfected with miR-26b mimics or inhibitors. Then, we examined the expression of ß-catenin as the direct target of miR-26b. The results of the present study indicate that miR-26b may modulate subchondral bone loss induced by abnormal occlusion and influence the osteogenic differentiation of subchondral BMSCs through ß-catenin in the context of TMJ-OA progression.

Precise Intraoral Condylectomy With the Guide of Three-Dimensional Printed Template in a Mandibular Condylar Hyperplasia Patient.

PURPOSE: This study aimed to introduce an innovative method for mandibular condylectomy. A customized three-dimensional (3D) printed template is used to perform precise condylectomy in an intraoral approach. METHODS: Condylectomy combined with orthognathic surgery was used for the treatment of facial asymmetry secondary to unilateral condylar hyperplasia. The customized 3D printed osteotomy guide was placed with an intraoral approach under endoscopy, in order to perform a precise condylectomy. RESULT: With the customized 3D printed template, the condylectomy was performed more precisely, and the conventional extraoral incision was avoided. The osteotomy line was accurately transferred from the virtual surgical plan to the real surgery, which assured the precise resection. CONCLUSIONS: The intraoral approach combined with a 3D printed template provides a novel solution to perform the condylectomy precisely.

Is there variation in the depth of the curve of Spee in individuals with different dentoskeletal patterns? A systematic review with meta-analysis.

OBJECTIVE: To systematically evaluate all the evidence assessing variations in the depth of the curve of Spee (COS) according to the presence/absence of different dentoskeletal characteristics. SEARCH METHODS AND ELIGIBILITY CRITERIA: The eligibility criteria were outlined following the PECO framework, as follows: studies evaluating individuals with complete permanent dentition including second molars (P), which compared a group with a certain dentoskeletal variation (E) versus another group without the variation (C), regarding the depth of the COS (O). MEDLINE (via PubMed), Scopus, Web of Science, The Cochrane Library, LILACS and BBO (via Virtual Health Library), OpenGrey, and Google Scholar were searched up to September 2021 to identify eligible reports. DATA COLLECTION AND ANALYSIS: Duplicates were removed from all the records retrieved. The selection process and data collection were performed independently by two review members. The risk of bias was also assessed independently and in duplicate, using the guideline described by Fowkes and Fulton. Several meta-analyses (α = 0.05) were conducted to estimate the mean differences (MD) or standardized mean differences (SMD) in the depth of COS between individuals presenting or not certain dentoskeletal characteristics. The certainty of evidence was assessed using the GRADE tool. RESULTS: Thirty-five studies were selected for qualitative synthesis, and 29 of them for quantitative synthesis. All studies had methodological limitations that affected the risk of bias and increased the likelihood that results were due to chance. Syntheses showed that Class II malocclusion (SMD = 0.87; 95% CI: 0.61, 1.13; P < 0.00001; six datasets including 260 subjects analysed), Class II division 1 (SMD = 1.09; 95% CI: 0.62, 1.56; P < 0.00001; 14 datasets including 823 subjects analysed) and Class II division 2 (SMD = 2.65; 95% CI: 1.51, 3.79; P < 0.00001; eight datasets including 476 subjects analysed) had deeper COS than Class I malocclusion. The skeletal Class II also presented higher COS values than skeletal Class I (SMD = 0.57; 95% CI: 0.02, 1.12; P = 0.04; four datasets including 299 subjects analysed). Individuals with Class III malocclusion had flatter COS than the subjects having Class I malocclusion (SMD = -0.57; 95% CI: -1.07, -0.08; P = 0.02; nine datasets including 505 individuals analysed). No difference was shown in the COS depth between skeletal Class III and Class I (P > 0.05). Deep bite individuals had higher COS depth than those with normal overbite (MD = 0.61; 95% CI: 0.41, 0.82; P < 0.00001; two datasets including 250 subjects analysed). In addition, hypodivergent individuals presented deeper COS than normodivergents (SMD = 0.62; 95% CI: 0.37, 0.86; P < 0.00001; six datasets including 305 subjects analysed), and there was no significant difference in the COS depth between hyperdivergent and normodivergent individuals (P = 0.66). The certainty of evidence was rated as very low for all the syntheses. LIMITATIONS: All the quantitative syntheses included results from studies with methodological flaws. Therefore, they are potentially biased. Moreover, the evidence was also mainly affected in terms of the inconsistency of the results and the imprecision of the estimates. CONCLUSIONS: Although an apparent influence of dentoskeletal Class II, Class III malocclusion, deep bite, and the hypodivergent skeletal pattern on the depth of the COS is suggested, it is not possible to make definitive conclusions on the matter due to the very low certainty of the evidence. Further high-quality research is necessary.

Genes and Pathways Associated with Skeletal Sagittal Malocclusions: A Systematic Review.

Skeletal class II and III malocclusions are craniofacial disorders that negatively impact people's quality of life worldwide. Unfortunately, the growth patterns of skeletal malocclusions and their clinical correction prognoses are difficult to predict largely due to lack of knowledge of their precise etiology. Inspired by the strong inheritance pattern of a specific type of skeletal malocclusion, previous genome-wide association studies (GWAS) were reanalyzed, resulting in the identification of 19 skeletal class II malocclusion-associated and 53 skeletal class III malocclusion-associated genes. Functional enrichment of these genes created a signal pathway atlas in which most of the genes were associated with bone and cartilage growth and development, as expected, while some were characterized by functions related to skeletal muscle maturation and construction. Interestingly, several genes and enriched pathways are involved in both skeletal class II and III malocclusions, indicating the key regulatory effects of these genes and pathways in craniofacial development. There is no doubt that further investigation is necessary to validate these recognized genes' and pathways' specific function(s) related to maxillary and mandibular development. In summary, this systematic review provides initial insight on developing novel gene-based treatment strategies for skeletal malocclusions and paves the path for precision medicine where dental care providers can make an accurate prediction of the craniofacial growth of an individual patient based on his/her genetic profile.

Hopeless tooth and less posterior occlusion is related to a greater risk of low handgrip strength: A population-based cross-sectional study.

The effect of severely compromised teeth on masticatory function has not been properly evaluated in previous studies, as they were often considered equivalent to the healthy tooth or excluded as if absent in the dentition. Hopeless teeth, which refer to non-salvageable teeth that require extraction, can interfere with masticatory function. As posterior occlusion is directly related to the masticatory function, we evaluated pairs opposing posterior teeth (POPs) that reflect the arrangement as well as the number of remaining posterior teeth. This study investigated the relationship of a hopeless tooth to handgrip strength according to POPs in the elderly. This cross-sectional study used data from the Korea National Health and Nutrition Examination Survey (KNHANES). Among the data of 23,466 participants from 2015 to 2018, participants aged 60 years or older (n = 4,729) were included. In males with POPs scores of 0-7, considered poor posterior occlusion, the association with low handgrip strength persisted in the multivariate logistic regression model adjusted for all confounding variables. The odds ratio (OR) in the absence of hopeless teeth (OR = 1.91, 95% CI: 1.02-3.59) increased in the presence of a hopeless tooth (OR = 2.78, 95% CI: 1.42-5.47). Even with POPs scores of 8-11, considered good posterior occlusion, the association was significantly high in the presence of a hopeless tooth (OR = 2.82, 95% CI: 1.06-7.52). In females, the association disappeared in adjusted models. The fewer pairs of natural posterior teeth with occlusion, the greater the risk of low handgrip strength. Dentition containing hopeless teeth increases the risk of low handgrip strength, even in dentition with sufficient posterior occlusion. Preserving the posterior teeth in a healthy condition through personal oral hygiene and regular dental management is essential for maintaining components of physical function such as handgrip strength.

Extraction vs. Nonextraction on Soft-Tissue Profile Change in Patients with Malocclusion: A Systematic Review and Meta-Analysis.

OBJECTIVES: We aimed to summarize the current evidence regarding the impact of extraction vs. nonextraction in orthodontic treatment on patients' soft-tissue profile with malocclusion. METHODS: Between April 30th and November 30th, 2020, we searched PubMed and SCOPUS for published papers from inception to November 2020 using "orthodontic," "extraction," "nonextraction," and "Malocclusion." Included studies were summarized, and relevant data were extracted and analyzed using Review Manager 5.4. RESULTS: Pooled data from four controlled trials demonstrated a nonsignificant difference between extraction and nonextraction in terms of SNA (MD = 0.50, 95% CI: -0.37, 1.38; p = 0.26), SNB (MD = 0.11, 95% CI: -1.23, 1.44; p = 0.88), FMA (MD = 1.82, 95% CI: -2.39, 6.02; p = 0.40), IMPA (MD = 0.06, 95% CI: -8.83, -8.94; p = 0.99), overjet (MD = -1.47, 95% CI: -6.21, 3.26; p = 0.54), and overbite (MD = 0.50, 95% CI: -1.40, 2.40; p = 0.60). On the other hand, the extraction method significantly increased the ANB compared with the nonextraction group (MD = 0.78, 95% CI: 0.25, 1.31; p = 0.004). CONCLUSION: The current evidence demonstrated that nonextraction protocols for orthodontic treatment are a safe and effective alternative to extraction protocols; individually tailored treatment strategies should be applied. More randomized controlled trials are critically needed to safely make an evidence-based treatment conclusion.

Could Vitamin D3 Deficiency Influence Malocclusion Development?

The abnormal growth of the craniofacial bone leads to skeletal and dental defects, which result in the presence of malocclusions. Not all causes of malocclusion have been explained. In the development of skeletal abnormalities, attention is paid to general deficiencies, including of vitamin D3 (VD3), which causes rickets. Its chronic deficiency may contribute to skeletal malocclusion. The aim of the study was to assess the impact of VD3 deficiency on the development of malocclusions. The examination consisted of a medical interview, oral examination, an alginate impression and radiological imaging, orthodontic assessment, and taking a venous blood sample for VD3 level testing. In about 42.1% of patients, the presence of a skeletal defect was found, and in 46.5% of patients, dentoalveolar malocclusion. The most common defect was transverse constriction of the maxilla with a narrow upper arch (30.7%). The concentration of vitamin 25 (OH) D in the study group was on average 23.6 ± 10.5 (ng/mL). VD3 deficiency was found in 86 subjects (75.4%). Our research showed that VD3 deficiency could be one of an important factor influencing maxillary development. Patients had a greater risk of a narrowed upper arch (OR = 4.94), crowding (OR = 4.94) and crossbite (OR = 6.16). Thus, there was a link between the deficiency of this hormone and the underdevelopment of the maxilla.

Case Report: unilateral condylar hyperplasia.

Case: This report describes a clinical case of unilateral condylar hyperplasia (CH) with unique, atypical morphology. An important feature of this report is the documentation of a series of clinical photographs of the patient, showing a gradual increase in facial asymmetry associated with the CH. The main symptom reported in this case was facial asymmetry. The main intraoral clinical features observed in the patient were contralateral crossbite and ipsilateral open bite associated with CH. Surgical reshaping of the condyle was the treatment plan for this case. Conclusions: The main take away point from this case is the importance of obtaining previous photographs of the patient at different ages during case diagnosis, which helps the clinician to determine the approximate time of commencement of CH. This case also highlights the imaging features of rarely observed atypical shape of the hyperplastic condyle.

Craniofacial and occlusal features of children with Noonan syndrome.

Craniofacial features of 12 children with Noonan syndrome (NS) were compared with age and gender matched healthy children. Dental history, panoramic radiograph, dental casts, and cephalometric measurements were assessed. The palatal height was significantly increased in the study group compared with the control group (p = .009; paired t-test). The palatal width was significantly reduced in the study group compared with the control group (p = .006; paired t-test). The mean SNB was reduced in the study group compared with the control group (p = .02; paired t-test) and the ANB increased (p = .009; paired t-test). The mean Sum (NSAr + SArGo + ArgoMe) angle and SN-GoMe were increased in the study group compared with the control group (respectively, p = .015 and p = .002; paired t-test). The cephalometric analysis assessed a retruded position of the mandible, skeletal class II characteristics, and a vertical growth pattern. The mandibular hyperdivergency was associated to a positive overbite.

Accuracy Assessment of Virtual Surgical Planning Comparing 3D Virtual Surgical Planning and Post-Operative CBCTs in Surgical Skeletal Class III Cases: A Retrospective Study

ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.

Deep learning based discrimination of soft tissue profiles requiring orthognathic surgery by facial photographs.

Facial photographs of the subjects are often used in the diagnosis process of orthognathic surgery. The aim of this study was to determine whether convolutional neural networks (CNNs) can judge soft tissue profiles requiring orthognathic surgery using facial photographs alone. 822 subjects with dentofacial dysmorphosis and / or malocclusion were included. Facial photographs of front and right side were taken from all patients. Subjects who did not need orthognathic surgery were classified as Group I (411 subjects). Group II (411 subjects) was set up for cases requiring surgery. CNNs of VGG19 was used for machine learning. 366 of the total 410 data were correctly classified, yielding 89.3% accuracy. The values of accuracy, precision, recall, and F1 scores were 0.893, 0.912, 0.867, and 0.889, respectively. As a result of this study, it was found that CNNs can judge soft tissue profiles requiring orthognathic surgery relatively accurately with the photographs alone.

Effects of occlusal disharmony on susceptibility to atrial fibrillation in mice.

Tooth loss or incorrect positioning causes occlusal disharmony. Furthermore, tooth loss and atrial fibrillation (AF) are both risk factors for ischemic stroke and coronary heart disease. Therefore, we hypothesized that occlusal disharmony-induced stress increases susceptibility to AF, and we designed the present study to test this idea in mice. Bite-opening (BO) was done by cementing a suitable appliance onto the mandibular incisor to cause occlusal disharmony by increasing the vertical height of occlusion by 0.7 mm for a period of 2 weeks. AF susceptibility, evaluated in terms of the duration of AF induced by transesophageal burst pacing, was significantly increased concomitantly with atrial remodeling, including fibrosis, myocyte apoptosis and oxidative DNA damage, in BO mice. The BO-induced atrial remodeling was associated with increased calmodulin kinase II-mediated ryanodine receptor 2 phosphorylation on serine 2814, as well as inhibition of Akt phosphorylation. However, co-treatment with propranolol, a non-selective ß-blocker, ameliorated these changes in BO mice. These data suggest that improvement of occlusal disharmony by means of orthodontic treatment might be helpful in the treatment or prevention of AF.

Condyle modeling stability, craniofacial asymmetry and ACTN3 genotypes: Contribution to TMD prevalence in a cohort of dentofacial deformities.

Craniofacial asymmetry, mandibular condylar modeling and temporomandibular joint disorders are common comorbidities of skeletally disproportionate malocclusions, but etiology of occurrence together is poorly understood. We compared asymmetry, condyle modeling stability and temporomandibular health in a cohort of 128 patients having orthodontics and orthognathic surgery to correct dentofacial deformity malocclusions. We also compared ACTN3 and ENPP1 genotypes for association to clinical conditions. Pre-surgical posterior-anterior cephalometric and panometric radiographic analyses; jaw pain and function questionnaire and clinical examination of TMD; and SNP-genotype analysis from saliva samples were compared to assess interrelationships. Almost half had asymmetries in need of surgical correction, which could be subdivided into four distinct morphological patterns. Asymmetric condyle modeling between sides was significantly greater in craniofacial asymmetry, but most commonly had an unanticipated pattern. Often, longer or larger condyles occurred on the shorter mandibular ramus side. Subjects with longer ramus but dimensionally smaller condyles were more likely to have self-reported TMD symptoms (p = 0.023) and significantly greater clinical diagnosis of TMD (p = 0 .000001), with masticatory myalgia most prominent. Genotyping found two significant genotype associations for ACTN3 rs1671064 (Q523R missense) p = 0.02; rs678397 (intronic SNP) p = 0.04 and one significant allele association rs1815739 (R577X nonsense) p = 0.00. Skeletal asymmetry, unusual condyle modeling and TMD are common and interrelated components of many dentofacial deformities. Imbalanced musculoskeletal functional adaptations and genetic or epigenetic influences contribute to the etiology, and require further investigation.