Facial soft tissue characteristics of patients with different types of malocclusion.

BACKGROUND: This study aimed to investigate the facial soft tissue characteristics of patients with different types of malocclusion. METHODS: The 3dMD scanning data of patients with malocclusion admitted to our hospital from January 2018 to April 2022 were analyzed retrospectively. Forty-seven patients with Class I malocclusion, 43 patients with Class II malocclusion and 44 patients with Class III malocclusion were selected. All patients underwent 3dMD scans prior to orthodontic treatment. Then the differences in the 3D morphological parameters of the facial soft tissues were compared between different sexes and different types of malocclusion. Spearman's correlation was further used to analyze the correlation between each parameter and the classification of malocclusion. RESULTS: In the Class I group and Class II group, there were no significant differences in the 3D morphometric parameters of malocclusion patients of different sexes (P > 0.05). There were significant differences between Al (R)-AL (L), Ac (R)-Ac (L), Prn-Ac (L), n-Prn-Sn, and Al (R)-Al (L)/Ac (L)-Ah (L) values among the three groups of patients. Spearman correlation analysis showed that Ac (R)-Ac (L) and Al (R)-Al (L)/Ac (R)-Ac (L) were correlated with the type of malocclusion. CONCLUSION: Differences in facial soft tissues exist in patients with Class I, II, and III malocclusion. 3dMD technique may be helpful in developing an effective treatment plan prior to orthodontic treatment.

Digital analyses of Bolton tooth size ratios and their association to gender, angle class, and other occlusal traits: a study using a partially automated digital 3D model analysis.

BACKGROUND: This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods. MATERIALS AND METHODS: Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification. RESULTS: AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected. CONCLUSIONS: There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically.

Retrospective analysis of the upper airway anatomy and Sella turcica morphology across different skeletal malocclusions: a computerized technique.

OBJECTIVE: This study aimed to investigate the normal volumetric space and variations in the measurements of different landmarks in adults with different skeletal relations of the maxilla and the mandible based on CBCT data. The study also analyses these landmarks to locate any correlations. BACKGROUND: Numerous studies in orthodontics have found a relationship between orthodontic treatment and changes in the anatomy and function of the airway. Severe changes in airway morphology can cause breathing difficulties, lower quality of life, and even result in life-threatening conditions such as obstructive sleep apnoea. Consequently, orthodontic diagnosis and treatment planning require a thorough understanding of the airway space and its function. METHODS: The present retrospective study was conducted using CBCT records of 120 adult patients, containing 40 samples of each skeletal class (20 males and 20 females). The boundaries were defined for the 3 major regions: the nasopharynx, the oropharynx, and the hypopharynx. Various measurements were recorded across these regions, as well as selective cephalometric landmarks. The obtained data was used to calculate average and standard deviation, while regression analysis was used to evaluate correlations and t-test was used to test statistical significance of gender differences. RESULTS: The results demonstrate that skeletal Class III individuals exhibit a reduced airway volume in the nasopharynx compared to other groups, whereas skeletal Class II individuals displayed a diminished airway volume in the hypopharynx. A strong correlation was observed for Sella turcica parameters. There were no significant differences in skeletal parameters across genders. Nasopharynx cavity volume demonstrated significant differences between skeletal Class I-Class III as well as between skeletal Class II-Class III. Hypopharynx cavity volume also demonstrated significant differences between skeletal Class I-Class II and between skeletal Class II-Class III. CONCLUSION: The major findings are the presence of a reduced nasopharyngeal volume in skeletal Class III malocclusions while skeletal Class II individuals displayed a diminished hypopharyngeal volume, making these critical areas to consider during the diagnostic and orthodontic treatment planning stages. This study also revealed a consistent correlation between Sella turcica parameters across various facial skeletal profiles, with skeletal Class II patients exhibiting a distinct pattern and skeletal Class I and Class III demonstrating an average relationship.

Lateral cephalometric parameters among Arab skeletal classes II and III patients and applying machine learning models.

BACKGROUND: The World Health Organization considers malocclusion one of the most essential oral health problems. This disease influences various aspects of patients' health and well-being. Therefore, making it easier and more accurate to understand and diagnose patients with skeletal malocclusions is necessary. OBJECTIVES: The main aim of this research was the establishment of machine learning models to correctly classify individual Arab patients, being citizens of Israel, as skeletal class II or III. Secondary outcomes of the study included comparing cephalometric parameters between patients with skeletal class II and III and between age and gender-specific subgroups, an analysis of the correlation of various cephalometric variables, and principal component analysis in skeletal class diagnosis. METHODS: This quantitative, observational study is based on data from the Orthodontic Center, Jatt, Israel. The experimental data consisted of the coded records of 502 Arab patients diagnosed as Class II or III according to the Calculated_ANB. This parameter was defined as the difference between the measured ANB angle and the individualized ANB of Panagiotidis and Witt. In this observational study, we focused on the primary aim, i.e., the establishment of machine learning models for the correct classification of skeletal class II and III in a group of Arab orthodontic patients. For this purpose, various ML models and input data was tested after identifying the most relevant parameters by conducting a principal component analysis. As secondary outcomes this study compared the cephalometric parameters and analyzed their correlations between skeletal class II and III as well as between gender and age specific subgroups. RESULTS: Comparison of the two groups demonstrated significant differences between skeletal class II and class III patients. This was shown for the parameters NL-NSL angle, PFH/AFH ratio, SNA angle, SNB angle, SN-Ba angle. SN-Pg angle, and ML-NSL angle in skeletal class III patients, and for S-N (mm) in skeletal class II patients. In skeletal class II and skeletal class III patients, the results showed that the Calculated_ANB correlated well with many other cephalometric parameters. With the help of the Principal Component Analysis (PCA), it was possible to explain about 71% of the variation between the first two PCs. Finally, applying the stepwise forward Machine Learning models, it could be demonstrated that the model works only with the parameters Wits appraisal and SNB angle was able to predict the allocation of patients to either skeletal class II or III with an accuracy of 0.95, compared to a value of 0.99 when all parameters were used ("general model"). CONCLUSION: There is a significant relationship between many cephalometric parameters within the different groups of gender and age. This study highlights the high accuracy and power of Wits appraisal and the SNB angle in evaluating the classification of orthodontic malocclusion.

Credibility of Pont's index in Egyptian population.

BACKGROUND: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects. METHODS: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values. RESULTS: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index. CONCLUSION: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations.

Assessment of nasal respiration and three-dimensional airway volume changes in orthognathic surgery patients.

OBJECTIVES: The aim of this study was to evaluate the effect of maxillary movements in orthognathic surgery on nasal airway volume change and its correlation with airflow and resistance. MATERIALS AND METHODS: This study included 25 patients (8 male, 17 female) with Class II (6 patients) or Class III (19 patients) malocclusion. All patients underwent Le Fort I and bilateral sagittal split ramus osteotomy. Nasal airflow and resistance were measured by using rhinomanometry and acoustic rhinometry pre and six months post-operatively. Nasal volume was measured using computed tomography before surgery and six months after surgery. RESULTS: Nasal volume increased in 10 out of 11 patients with CCW (counterclockwise) rotation and decreased in 1 patient while, nasal volume increased in 5 patients with CW (clockwise) rotation and decreased in 9 patients. Superior nasal airway volume increased significantly, while the effects on nasal flow and resistance were not significant. Additionally, no significant correlation was found between airway volume changes and variations in airflow and resistance. CONCLUSION: CCW rotation in orthognathic surgery patients significantly increased superior nasal airway volume but did not improve nasal airway flow and resistance.

Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Measurement plane of the cross-sectional area of the masseter muscle in patients with skeletal Class III malocclusion: An artificial intelligence model.

INTRODUCTION: This study aimed to determine a measurement plane that could represent the maximum cross-sectional area (MCSA) of masseter muscle using an artificial intelligence model for patients with skeletal Class III malocclusion. METHODS: The study included 197 patients, divided into subgroups according to sex, mandibular symmetry, and mandibular plane angle. The volume, MCSA, and the cross-sectional area (CSA) at different levels were calculated automatically. The vertical distance between MCSA and mandibular foramen, along with the ratio of the masseter CSA at different levels to the MCSA (R), were also calculated. RESULTS: The MCSA and volume showed a strong correlation in the total sample and each subgroup (P <0.001). The correlation between the CSA at each level and MCSA was statistically significant (P <0.001). The peak of the r and the correlation coefficient between the CSA at different levels and MCSA were mostly present 5-10 mm above the mandibular foramen for the total sample and the subgroups. The mean of RA5 to RA10 was >0.93, whereas the corresponding correlation coefficient was >0.96, both for the entire sample and for the subgroups. CONCLUSIONS: MCSA could be used as an indicator for masseter muscle size. For patients with skeletal Class III malocclusion, the CSA 5-10 mm above the mandibular foramen, parallel to the Frankfort plane, could be used to estimate the masseter muscle MCSA.

Three-dimensional evaluation of mandibular lingula: Comparisons of skeletal angle classifications and growth patterns.

OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.

'Study of the maxillary yaw on cone beam computed tomography: A preliminary report and comparison between two different dento-skeletal malocclusions'.

OBJECTIVES: To assess the skeletal and dental maxillary transverse compensation (yaw) on the cone beam computed tomography (CBCT) three-dimensional reconstructed image of the skull in two groups of patients, both clinically affected by a class III malocclusion with deviation of the lower midline. MATERIALS AND METHODS: An observational retrospective study was designed to analyse differences in two groups of patients, the first one was composed by patients affected by horizontal condylar hyperplasia, the second one by patients affected by dento-skeletal asymmetric class III malocclusion. Each group was composed by 15 patients. Transverse analysis was performed by measuring five landmarks (three bilateral and two uneven) with respect to a mid-sagittal plane; sagittal analysis was performed by measuring the sagittal distance on the mid-sagittal plane between bilateral points. Means were compared through inferential analysis. RESULTS: In the condylar hyperplasia group, all differences between the two sides were not statistically significant, nor for canines' difference (P = .0817), for molars (P = .1105) or for jugular points (.05871). In the class III group, the differences between the two sides were statistically significant for molars (P = .0019) and jugular points (P = .0031) but not for canines (P = .1158). Comparing the two groups, significant differences were found only for incisors' midline deviation (P = .0343) and canine (P = .0177). CONCLUSION: The study of the yaw on CBCT should be integrated into three-dimensional cephalometry and could help in differentiating the various malocclusion patterns.

Temporomandibular joint articular disc position and shape in skeletal Class III.

OBJECTIVE: To compare the position and shape of the temporomandibular joint (TMJ) articular disc among the sagittal and vertical skeletal patterns in Angle Class III, Class III subdivision malocclusion and normal occlusion. The null hypothesis was that there was no difference in disc position and shape in different (1) malocclusions and (2) skeletal patterns. METHODS: This cross-sectional observational study evaluated 105 patients divided into 3 groups: Class III (33, 9.39 ± 1.96 years), Class III subdivision (45, 9.51 ± 1.59 years) and a normal occlusion (27, 10.24 ± 0.87 years) was included as healthy control. Severity of the maxilla-mandibular anteroposterior discrepancy and vertical facial pattern were determined using 2D cephalometry, and the position and shape of the articular discs were evaluated in magnetic resonance images. Statistical parametric and non-parametric tests and Kappa analysis for intra-observer and inter-observer assessment were used (p ≤ .05). RESULTS: Significant between-group differences were found in articular disc position. In the normal occlusion group, all the articular discs were well positioned. In Class III and Class III subdivision, the discs were displaced in 30.3% and 12.2% of the TMJs, respectively. Sagittal and vertical skeletal patterns did not affect the findings significantly. The Class III subdivision malocclusion group is probably different from the other groups, showing 97.7% of biconcave discs in both TMJs. CONCLUSION: The longitudinal follow-up of this sample becomes relevant as the two groups with malocclusion in the pre-peak phase of pubertal growth showed differences in the prevalence of displacement and form of the articular disc, with no association with their vertical facial characteristics.

Skeletal Class III Malocclusion Is Associated with ADAMTS2 Variants and Reduced Expression in a Familial Case.

Skeletal Class III malocclusion with maxillary deficiency is a severe maxillofacial disease with unclear pathogenic mechanisms. We recruited a Han Chinese family who was clinically diagnosed with skeletal Class III malocclusion and maxillary deficiency. Using whole exome sequencing, a missense variant in ADAMTS2 (NM_014244: c.3506G>T: p.G1169V) was identified and predicted as deleterious by in silico tools. We also found ADAMTS2 variants associated with deficient maxillary development in a cohort. ADAMTS2 expression in HEK293 cells showed significant decrease due to the variant, which was also consistent in dental pulp stem cells from the proband and a healthy control. In the adamts2-knockdown zebrafish model, the length and width of the ethmoid plate, as well as the length of the palatoquadrate became significantly shorter than the control group (p < 0.001), while there was no significant difference in the length and width of the mandible. The expression of Sox3, which was required in early embryonic craniofacial development, was significantly downregulated in the adamts2-knockdown zebrafish embryos. Bioinformatic and cellular studies showed that the decreased expression of ADAMTS2 may inhibit downstream ErbB signaling pathway transduction and restrain subsequent osteogenesis in human adult mesenchymal stromal cells. Collectively, these data showed that ADAMTS2 (c.3506G>T: p.G1169V) may confer susceptibility to risk of skeletal Class III malocclusion with maxillary deficiency.

Accuracy Assessment of Virtual Surgical Planning Comparing 3D Virtual Surgical Planning and Post-Operative CBCTs in Surgical Skeletal Class III Cases: A Retrospective Study

ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.

Comparison of three-dimensional soft-tissue evaluations between skeletal and pseudo-class III malocclusions.

The aim of our study was to compare soft tissue measurements with 3D imaging methods in individuals with untreated skeletal and pseudo-Class III malocclusions. The study sample consisted of 75 patients (38 males, 37 females, mean age 12.41 ± 2.35 years) with pseudo- and true skeletal Class III malocclusions and skeletal Class I malocclusions. Soft tissue evaluations of all patients were performed using 3D stereophotogrammetric facial images. In our study, 26 landmarks, 17 linear measurements, 13 angular measurements, and 5 volume measurements were made using the 3dMD Vultus software. The significance was determined to be p < 0.05 in ANOVA, Tukey tests. No significant differences were found among the groups in terms of demographic data (p > 0.05). The skeletal Class I control group had a significantly more extended upper lip and vermillion length as compared to the Class III groups. The soft tissue convexity angle and upper nasal angle were found to be wider in the Class III malocclusion group compared to those in the Class I control group. While the pseudo-Class III group had a significantly lower midface volume, chin volume was significantly higher in the skeletal class group. Upper lip volume was significantly higher in the Class I group. Using 3dMD for guiding clinicians in the differential soft and hard tissue diagnosis of pseudo-Class III malocclusions, differences were revealed in Class I patients in the middle part of the face. In the differential diagnosis of true Class III malocclusions, chin volume was found to be different from that of Class I patients.

Morphological changes of frankel functional regulator III in mixed dentition with class III malocclusion / Cambios morfológicos del regulador funcional frankel III en dentición mixta con maloclusión clase III

The aim of this study was to evaluate the hard and soft tissue profile changes following treatment of functional and mild skeletal class III malocclusion in mixed dentition by means of the Frankel functional regulator (FR-3) appliance, and to reveal the mechanism and effectiveness of treatment with FR-3 appliance. Twenty-six patients (chronological mean age, 8.7±1.4 years; mean treatment duration, 10.3±1.3 months) with functional and mild skeletal class III malocclusion were selected and treated with FR-3 appliances. Lateral cephalogram was taken pre- and post-treatment, and the data was analyzed by paired-samples t test with SPSS22.0 software package. Differences were considered statistically significant at P < 0.05. The results demonstrated that the FR-3 appliance produced a statistically significant decrease in L1-NB, L1-MP, U1-L1 (P<0.01) and an increase greatly in ANB, MP-FH, Y axis, ANSMe, ANS-Me/N-Me and overjet (P<0.01). SNA, SNB were increased significantly (P<0.05). Meanwhile, N'-Sn-Pog', ULSn-SN, LLSiSN increased, S-N'-Si, LL-EP decreased with significant difference (P<0.01). S-N'-Sn, Cm-Sn-UL, UL-EP, Sn-Mes and Ns-Mes increased with significant difference (P<0.05). Therefore it was concluded that after FR-3 treatment, the position of mandible may rotate clockwise backwards and downwards, with the labioversion of upper incisors and linguoversion of lower incisors. Although point A moved mesially, the length and position of the maxilla did not change significantly. With the protrusion of upper lip and the retrusion of lower lip, the relationship among nose, upper lip, lower lip and chin become harmonious, the profile of soft tissue is more coordinated and attractive.

El objetivo de este estudio fue evaluar los cambios en el perfil de los tejidos duros y blandos después del tratamiento de la maloclusión funcional y leve de la clase III esquelética en la dentición mixta mediante el aparato regulador funcional Frankel (FR-3), y revelar el mecanismo y efectividad del tratamiento con el aparato FR-3. Veintiseis pacientes (edad media 8,7 ± 1,4 años; duración media del tratamiento, 10,3 ± 1,3 meses) con maloclusión funcional y leve de clase esquelética III fueron seleccionados y tratados con aparatos FR-3. El cefalograma lateral se tomó antes y después del tratamiento, y los datos se analizaron mediante la prueba t de muestras con el software SPSS22.0. Las diferencias se consideraron estadísticamente significativas a P <0,05. Los resultados demostraron que el dispositivo FR-3 produjo una disminución estadísticamente significativa en L1-NB, L1MP, U1-L1 (P <0,01) y un gran aumento en ANB, MP-FH, eje Y, ANS-Me, ANS -Me / N-Me y overjet (P <0,01). SNA, SNB se incrementaron significativamente (P <0,05). Mientras tanto, N'Sn-Pog', ULSn-SN, LLSi-SN aumentaron, S-N'-Si, LL-EP disminuyeron con una diferencia significativa (P <0,01). S-N'-Sn, Cm-Sn-UL, UL-EP, Sn-Mes y Ns-Mes aumentaron con una diferencia significativa (P <0,05). Por lo tanto, se concluyó que después del tratamiento con FR-3, la posición de la mandíbula puede girar en sentido reloj hacia atrás y hacia abajo, con labioversión de los incisivos superiores y linguoversión de los incisivos inferiores. Aunque el punto A se movió mesialmente, la longitud y la posición del maxilar no cambiaron significativamente. Con la protuberancia del labio superior y la retrusión del labio inferior, la relación entre la nariz, el labio superior, el labio inferior y el mentón se armoniza, el perfil del tejido blando es más coordinado y atractivo.

Three-dimensional evaluation of skeletal and dental changes in patients with skeletal class III malocclusion and facial asymmetry after surgical-orthodontic treatment.

OBJECTIVE: To evaluate skeletal and dental changes in patients with skeletal Class III malocclusion and facial asymmetry after surgical-orthodontic treatment using cone-beam computerized tomography (CBCT). METHODS: This study included forty adult patients diagnosed with skeletal Class III malocclusion and asymmetry who underwent either isolated mandibular surgery or bimaxillary surgery. CBCT scans were taken before treatment (T0), at the completion of presurgical orthodontic treatment (T1) and after treatment (T2). Mimics 17.0 and 3-Matics 7.0 were used to measure skeletal and dental parameters. Skeletal and dental changes within each group from pretreatment to posttreatment were assessed, and Pearson correlation analysis was used to analyze the correlations among skeletal changes. RESULTS: The three-dimensional changes in condylar position were insignificant after surgical-orthodontic treatment in either group (P > 0.05). However, in the one-jaw surgery group, there were significant backward rotations of the condyle and ramus on the nondeviated side (P < 0.05), and the condyle on the deviated side rotated inward and forward significantly in the two-jaw surgery group (P < 0.05) at T2. There were no significant differences in the changes in the total alveolar bone thickness of bilateral first molars during dental decompensation (P > 0.05). The ratio between the buccal and the total bone thickness around the maxillary first molar on the deviated side decreased significantly at T1, as did those around the mandibular first molar on the nondeviated side (P < 0.05). CONCLUSIONS: Condylar angulations were less stable after treatment (7 to 9 months after surgery) in both the one-jaw and the two-jaw surgery groups, while condylar displacements were insignificant. In addition, orthodontists should keep a watchful eye to the relative position of the root in the alveolar bone during tooth decompensation.

Surgically assisted maxillary expansion; about a clinical case.

INTRODUCTION: By means of orthopedics, orthognathic surgery or orthodontics, the management of the maxillary transverse defisciency is a key element of the orthodontic treatment plan, and the guarantee of its stability. the following work aims to support, through a clinical case, the management and the progression of the treatment of the maxillary transverse deficiency associated to a class III skeletal anomaly. OBSERVATION: The authors report the case of a 15-year-old patient with a severe class III    malocclusion, with severe maxillary transverse deficiency. The objectives of the treatment were, first, to solve the transverse disharmony by surgically assisted rapid maxillary expansion (SARME), then, secondly, to remove the dentoalveolar compensations and a bimaxillary orthognathic surgery, was carried out to correct the sagittal and vertical disharmony. CONCLUSION: Surgically assisted rapid maxillary expansion (SARME) appears to be advantageous, both functionally and aesthetically to overcome transverse maxillary deficiency. The agreement between the orthodontist, the maxillofacial surgeon and / or the plastic surgeon, both in the schedule and in the choice of surgical interventions, remains decisive concerning ortho-surgical treatments.

CBCT Analysis of Changes in Dental Occlusion and Temporomandibular Joints before and after MEAW Orthotherapy in Patients with Nonlow Angle of Skeletal Class III.

This study focus on the changes of the position and morphology of jaw and condyle after MEAW (the multiloop edgewise arch wire) treatment in adults with a nonlow angle (mean angle or high angle SN - MP > 27°) of skeletal class III (mild to moderate skeletal classs III means -5° < ANB < 0°) malocclusions measured by CBCT (cone beam computed tomography). Twenty adult patients (aged 17-26) with a nonlow angle of skeletal class III malocclusions were selected in this study taken orthodontic treatment by MEAW. CBCT was taken before and after the treatment to analyze the changes of the jaw and condyle. After treatment, the angle of L7-MP decreased 12.2°, L6-MP decreased 10.5°, L1-MP decreased 8.8° (P < 0.001 for each) and U1-SN increased (P < 0.05). There was no significant changes between anterior and posterior APDI index and between anterior and posterior spaces of the TMJ (temporomandibular joint) (P > 0.05). The linear ratio of the TMJ was the LR > 12 before treatment, while it was -12 < LR < 12 after treatment; however, there was no statistically significant difference between them (P > 0.05). There was also no significant change in anterior and posterior position and morphology of the condyle within the joint fossa after the treatment by MEAW in this study. MEAW technology in correcting the class III with nonlow angle patients mainly relies on the compensation of distally and posterior mandibular teeth, rather than the mandible and condyle moving backward to establish a neutral occlusal. This study was approved by the institutional ethics committee of the Second Hospital of Tianjin Medical University (No. KYJJ2013002).

Evaluation of sagittal airway dimensions after face mask therapy with rapid maxillary expansion in Class III growing patients.

OBJECTIVE: The aim of this investigation was to analyze the effects of RME and FM on the airway dimensions in Class III patients compared with untreated controls. METHODS: A sample of 47 Class III patients treated with RME and FM was analyzed. The treated group was compared with 18 untreated controls. Lateral cephalograms for each patient at T1, T2, and T3 were digitized. RESULTS: At long-term evaluation a significant increase in airway size and a significant decrease in adenoid size were found in the treated group as well as an improvement in the pharynx dimension. During active treatment the treated group showed a significant improvement in lower airway size and in lower pharynx dimension. A significant decrease in adenoid size was also found. CONCLUSION: The treatment with RME and FM produced favorable stable changes in the airway dimensions in Class III subjects when compared with untreated controls.

Dentoskeletal morphology in adults with Class I, Class II Division 1, or Class II Division 2 malocclusion with increased overbite.

INTRODUCTION: The treatment options for adults with increased overbite are limited to dentoalveolar changes that camouflage the condition. Because of high relapse tendency, defining the problem area is important when creating a treatment plan. This study aimed to evaluate dentoskeletal morphology in skeletal Class I and II anomalies associated with Angle Class I, Class II Division 1 (Class II/1), and Class II Division 2 (Class II/2) malocclusions with increased overbite compared with normal occlusion. METHODS: Pretreatment cephalograms of 306 patients (131 men, 175 women; overall ages 18-45 years) were evaluated. Four groups were constructed. Three groups had increased overbite (>4.5 mm): group 1 (n = 96) skeletal Class I (ANB = 0.5°-4°), group 2 (n = 85) skeletal Class II (ANB >4.5°) with Class II/1; and group 3 (n = 79) skeletal Class II with Class II/2 malocclusion. Group 4 as a control (n = 46) skeletal Class I normal overbite. Dental and skeletal characteristics of the groups were compared by sex. For statistical evaluations, analysis of variance followed by Tukey post hoc, Mann-Whitney U, and Kruskall-Wallis tests were used. Additionally correlation coefficients between overbite and skeletal/dental parameters were calculated. RESULTS: Between sexes, with regard to skeletal parameters, the men had greater values in millimetric measurements, and the women had higher SN/GoGn values. Maxillary/mandibular molar heights and the mandibular incisor heights were higher in men. In group 1, decreased lower anterior facial height (LAFH), retrusive mandibular incisors, and increased interincisal degree were determined. The maxillary molars were intrusive, whereas the vertical position of the mandibular molars and incisors in both jaws were normal. In group 2, retrognathic mandible, increased LAFH and mandibular plane angle, extrusive maxillary/mandibular incisors, protrusive mandibular incisors, and decreased interincisal degree were found. In group 3, decreased LAFH, increased interincisal degree, and retrusive incisors in both jaws were determined. There were significant negative correlations between SN/GoGN, palatal plane, and overbite in group 2 and between ANS-SN and overbite in group 3, and positive correlation between interinsical angle and overbite in all increased overbite groups. CONCLUSIONS: Dental morphology seems to be the main factor of increased overbite. Differences between groups were related primarily to inclinations and vertical positions of the incisors, rather than molar positions.