Are computed tomography images of the mandible useful in age and sex determination? A forensic science meta-analysis.

OBJECTIVES: This meta-analysis addresses the use of mandibular computed tomography (CT) scans for age and/or sex determination in forensic science. METHODS: Six databases were searched until June 2023, using the keyword "mandible" combined with keywords related to "multislice computed tomography" (MCT) or "cone-beam computed tomography" (CBCT) and keywords related to "skeletal age determination" or "sex determination analysis." MAIN RESULTS: Among the 23 studies included, 11 used MCT and 12 used CBCT to perform forensic assessments. Age determination was the aim of a single study, sex and agedeterminations were the objective of five studies, and the other studies investigated the determination of sex only. Metaanalysis could be performed only for sex determination. CONCLUSIONS: Mandible measurements are useful in sex determination, as the bicondylar and bigonial breadth are larger in males than in females. For the mandible angle, the meta-analysis results confirm sex dimorphism in CBCT scans but not in MCT scans. For age estimation, further studies are needed to prove that the mandible hole is a reliable parameter for age estimation. PROSPERO registration number: CRD42021260967.

Chewing asymmetry in dogs: Exploring the importance of the fossa masseterica and first molar teeth morphology.

Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences.

Geometric morphometric evaluation of mandibles of four sheep breeds: Bardoka, Ivesi, Polish Mountain sheep and Turcana.

The enduring relationship between humans and domestic sheep has evolved over millennia, showcasing diverse uses such as meat, milk, wool, leather and fur, shaped by geographical, historical, cultural and social factors. The sheep breeds discussed include the Ivesi from Southeastern Anatolia, known for its varied animal products; the resilient Turcana breed of Romania; Kosovo's Bardoka, valued for its triple-purpose characteristics; and Poland's Polish Mountain Sheep, uniquely utilized for milk production in cheese making. Sheep, with their enduring relationship with humans and significant economic importance, have attracted scientific interest in morphometric studies of their mandibles, yielding valuable data applicable across various fields including basic anatomy, veterinary clinical anatomy, zooarchaeology and veterinary forensic medicine. Traditional morphometric studies rely on statistical methods to compare length, depth and angular ratios between anatomical formations, often highlighting differences between specific points but not fully revealing shape variations between distinct groups. Geometric morphometric analysis has emerged as a preferred method in recent years, enabling shape analyses using coordinate data from various imaging techniques, facilitating a comprehensive examination of mandibular morphometrics among sheep breeds across different countries. This study involved four sheep breeds from different countries, namely Ivesi from Turkey, Bardoka from Kosovo, Polish Mountain Sheep from Poland and Turcana from Romania, with a total of 70 mandibles sourced from various veterinary faculties. Mandibular photographs were meticulously captured, focusing on the right side of mandible pairs and placing landmarks and semi-landmarks along the entire edge, enabling geometric morphometric analysis using tpsUtil, tpsDig2 and MorphoJ software. The analysis included principal component analysis, canonical variate analysis and discriminant function analysis for pairwise comparisons, facilitating a comprehensive examination of mandibular shape variations among the different sheep breeds. Using geometric morphometric methods, this study analysed mandibles from four distinct sheep breeds sourced from different countries, revealing notable variations in regions such as the ramus mandibula, angulus mandibula and incisive areas, attributed to genetic, geographical and dietary influences, highlighting the importance of continued research to better comprehend these shape differences.

The mylohyoid line is highly variable but does not affect the microarchitecture of the edentulous alveolar bone - an anatomical micro-CT study.

OBJECTIVES: To evaluate in the absence of teeth the variability of the mylohyoid line (ML), the microarchitecture of the adjacent bone, and whether the variable prominence/width of the ML is associated with the quality of the adjacent bone. METHODS: µCT scans of 28 human mandibles from anatomical specimens were analyzed. The following parameters were assessed in four edentulous areas (first and second premolar (PM), first, second, and third molar (M1/2/3)): ML width, cortical thickness (CtTh), average cortical- (Avg.Ct.BV/TV), and trabecular bone volume fraction (Avg.Tb.BV/TV). RESULTS: The ML width increased from the PM towards the M2 region, which also showed the highest variance (range: 0.4-10.2 mm). The CtTh showed a decrease in the M3 region, while Avg.Ct.BV/TV and Avg.Tb.BV/TV hardly differed among the regions. In the multivariable model on the effect of the various parameters on the ML width, only gender and tooth region were significant. Specifically, male specimens were associated with a wider ML width compared to female specimens and the M2 region was associated with a wider ML width compared to the other tooth regions. CONCLUSION: The ML width was not associated with the cortical and trabecular bone quality in the adjacent bone, while gender and tooth region had a significant effect. Specifically, the ML width was lower in female, but peaked in the M2 region with a median width of 3-4 mm. CLINICAL RELEVANCE: From a clinical point of view, it was confirmed that the ML is in general a highly variable structure, especially in the M2 region, but the ML width does not allow any conclusions on the bone quality. Altogether, this underlines the need for an individual and accurate diagnostic prior to any surgical intervention.

Fossils document evolutionary changes of jaw joint to mammalian middle ear.

The dual jaw joint of Morganucodon1,2 consists of the dentary-squamosal joint laterally and the articular-quadrate one medially. The articular-quadrate joint and its associated post-dentary bones constitute the precursor of the mammalian middle ear. Fossils documenting the transition from such a precursor to the mammalian middle ear are poor, resulting in inconsistent interpretations of this hallmark apparatus in the earliest stage of mammaliaform evolution1-5. Here we report mandibular middle ears from two Jurassic mammaliaforms: a new morganucodontan-like species and a pseudotribosphenic shuotheriid species6. The morganucodontan-like species shows many previously unknown post-dentary bone morphologies1,2 and exhibits features that suggest a loss of load-bearing function in its articular-quadrate joint. The middle ear of the shuotheriid approaches the mammalian condition in that it has features that are suitable for an exclusively auditory function, although the post-dentary bones are still attached to the dentary. With size reduction of the jaw-joint bones, the quadrate shifts medially at different degrees in relation to the articular in the two mammaliaforms. These changes provide evidence of a gradual loss of load-bearing function in the articular-quadrate jaw joint-a prerequisite for the detachment of the post-dentary bones from the dentary7-12 and the eventual breakdown of the Meckel's cartilage13-15 during the evolution of mammaliaforms.

Mandibular and dental measurements for sex determination using machine learning.

The present study tested the combination of mandibular and dental dimensions for sex determination using machine learning. Lateral cephalograms and dental casts were used to obtain mandibular and mesio-distal permanent teeth dimensions, respectively. Univariate statistics was used for variables selection for the supervised machine learning model (alpha = 0.05). The following algorithms were trained: logistic regression, gradient boosting classifier, k-nearest neighbors, support vector machine, multilayer perceptron classifier, decision tree, and random forest classifier. A threefold cross-validation approach was adopted to validate each model. The areas under the curve (AUC) were computed, and ROC curves were constructed. Three mandibular-related measurements and eight dental size-related dimensions were used to train the machine learning models using data from 108 individuals. The mandibular ramus height and the lower first molar mesio-distal size exhibited the greatest predictive capability in most of the evaluated models. The accuracy of the models varied from 0.64 to 0.74 in the cross-validation stage, and from 0.58 to 0.79 when testing the data. The logistic regression model exhibited the highest performance (AUC = 0.84). Despite the limitations of this study, the results seem to show that the integration of mandibular and dental dimensions for sex prediction would be a promising approach, emphasizing the potential of machine learning techniques as valuable tools for this purpose.

Determining the position of the lingula and the mandibular foramen using the antilingula in orthognathic surgery.

BACKGROUND: The antilingula located on the lateral surface of the mandibular ramus has been served as a surgical landmark for the mandibular foramen on the medial surface for decades. However, whether the antilingula truly represents the lingula which is the bony prominence overlapping the mandibular foramen, or the foramen itself, is still unclear. This study thus aimed to examine the position of the antilingula in relation to three reference points: the lingula, the anterior and the posterior borders of the mandibular foramen, as well as to the reference plane used in the inferior alveolar nerve block, and to the posterior border of the mandible. METHODS: This observational study was performed in 113 Thai dry mandibles. The antilingula were identified followed by transferring the reference points to the lateral surface. The distances from the antilingula to the reference points, the reference plane and the posterior border of the ramus were then measured. Chi-square test was calculated for side-dependency of the antilingula. Paired t-test was calculated for difference in measurements in left and right sides. RESULTS: The antilingula could be identified in 92.48% of the mandibles with 86.67 - 90.00% accuracy and 86.67% reliability. There was no significant difference in the presence of the antilingula on left and right sides (p = 0.801). Only 2.5% and 0.83% of the antilingula correspond to the lingula and the anterior border of the mandibular foramen, respectively. However, 85% of the reference points were located within 11 mm radius. The antilingula was found located 2.80 mm inferior to the reference plane and 16.84 mm from the posterior border of the ramus. CONCLUSIONS: The antilingula does not concur with the reference points on the medial surface. Our study also suggests that the safe area for vertical osteotomy is 11 mm posterior to the antilingula or at 30% of the length from the posterior border parallel to the occlusal plane. The use of more accurate techniques in localizing the mandibular foramen combined with the antilingula is more recommended than using the antilingula as a sole surgical guide.

Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics.

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9-73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.

Cranial anatomy of Emeroleter levis and the phylogeny of Nycteroleteridae.

Among the diverse basal reptile clade Parareptilia, the nycteroleters are among the most poorly understood. The interrelationships of nycteroleters are contentious, being recovered as both monophyletic and paraphyletic in different analyses, yet their anatomy has received little attention. We utilized x-ray computed tomography to investigate the skull of the nycteroleterid Emeroleter levis, revealing aspects of both the external and internal cranial anatomy that were previously unknown or undescribed, especially relating to the palate, braincase, and mandible. Our results reveal a greater diversity in nycteroleter cranial anatomy than was previously recognized, including variation in the contribution of the palatal elements to the orbitonasal ridge among nycteroleters. Of particular note are the unique dentition patterns in Emeroleter, including the presence of dentition on the ectopterygoid, an element which is typically edentulous in most parareptiles. We then incorporate the novel information gained from the computed tomography analysis into an updated phylogenetic analysis of parareptiles, producing a fully resolved Nycteroleteridae and further supporting previous suggestions that the genus 'Bashkyroleter' is paraphyletic.

Musculoaponeurotic architecture of the human masseter muscle: an in vivo ultrasonographic study of architectural changes during mandibular protrusion and lateral excursions.

OBJECTIVE: The present study evaluated the in vivo musculoaponeurotic architecture of the superficial head (SH) of the masseter muscle (MM) of asymptomatic participants in excursive mandibular movements compared to the relaxed state as examined with ultrasonography. It was hypothesized that the mean fiber bundle length (FBL) and mean height of the aponeurosis (HA) of the laminae of the SH would differ significantly between the relaxed state and protrusion, ipsilateral excursion, and contralateral excursion. STUDY DESIGN: The MM was studied volumetrically in 12 female and 12 male asymptomatic participants bilaterally by using ultrasound imaging. Mean FBL and HA in protrusion and ipsilateral and contralateral excursion were compared to these values in the relaxed state using paired t tests (P < .05). The intraclass correlation coefficient was used to assess intraexaminer reliability. RESULTS: The SH exhibited multiple laminae. Fiber bundles were found to attach to bone and the superior and inferior aponeuroses. Mean FBL was significantly shorter and mean HA significantly longer in protrusion and the excursions than in the relaxed state although the pattern of altered laminae and aponeuroses differed among the mandibular movements. Intraexaminer reliability was excellent. CONCLUSION: Specific changes in mean FBL and mean HA suggest differential contraction of the SH of the MM based on laminar morphology. These findings provide a baseline to investigate musculoaponeurotic changes in patients with myogenic masseter muscle pain.

What is a trait? Lessons from the human chin.

The chin, a distinguishing feature of Homo sapiens, has sparked ongoing debates regarding its evolutionary origins and adaptive significance. We contend that these controversies stem from a fundamental disagreement about what constitutes a well-defined biological trait, a problem that has received insufficient attention despite its recognized importance in biology. In this paper, we leverage paleoanthropological research on the human chin to investigate the general issue of character or trait identification. First, we examine four accounts of the human chin from the existing literature: the mandibular differential growth byproduct, the bony prominence, the inverted T-relief, and the symphyseal angle. We then generalize from these accounts and propose a three-stage framework for the process of character identification: description, detection, and justification. We use this framework to reinterpret the four accounts, elucidating key points of contention surrounding the chin as well as other morphological characters. We show that debates over the chin carry broad and important biological implications that extend beyond this trait and that are not mere semantic issues of definition.

Towards clinically applicable automated mandibular canal segmentation on CBCT.

OBJECTIVES: To develop a deep learning-based system for precise, robust, and fully automated segmentation of the mandibular canal on cone beam computed tomography (CBCT) images. METHODS: The system was developed on 536 CBCT scans (training set: 376, validation set: 80, testing set: 80) from one center and validated on an external dataset of 89 CBCT scans from 3 centers. Each scan was annotated using a multi-stage annotation method and refined by oral and maxillofacial radiologists. We proposed a three-step strategy for the mandibular canal segmentation: extraction of the region of interest based on 2D U-Net, global segmentation of the mandibular canal, and segmentation refinement based on 3D U-Net. RESULTS: The system consistently achieved accurate mandibular canal segmentation in the internal set (Dice similarity coefficient [DSC], 0.952; intersection over union [IoU], 0.912; average symmetric surface distance [ASSD], 0.046 mm; 95% Hausdorff distance [HD95], 0.325 mm) and the external set (DSC, 0.960; IoU, 0.924; ASSD, 0.040 mm; HD95, 0.288 mm). CONCLUSIONS: These results demonstrated the potential clinical application of this AI system in facilitating clinical workflows related to mandibular canal localization. CLINICAL SIGNIFICANCE: Accurate delineation of the mandibular canal on CBCT images is critical for implant placement, mandibular third molar extraction, and orthognathic surgery. This AI system enables accurate segmentation across different models, which could contribute to more efficient and precise dental automation systems.

Gingival thickness and gingival width in children: a cross-sectional study utilizing ultrasonography.

PURPOSE: To measure the gingival phenotype-related features, gingival thickness (GT) and gingival width (GW), in healthy children and to investigate their association between them, with age, gender, tooth-type and arch. METHODS: The gingival sites of 1029 teeth were included from 64 children (36 males and 28 females), with primary and mixed dentition, attending the paediatric dental clinic of Aristotle University, Thessaloniki. GT and GW were measured ultrasonically and with a periodontal probe, respectively. Mixed effects linear regression models were used to evaluate the association of gingival thickness and gingival width with the under-investigation parameters. Spearman's correlation coefficient was used to evaluate correlation between GT and GW. RESULTS: Significantly thicker gingiva is found in posterior teeth compared to anterior teeth, in permanent teeth versus primary teeth and in maxillary teeth in comparison to mandibular teeth (p value < 0.001). Regarding GW, significantly wider gingiva is noted in posterior regions (p value = 0.022) and the maxilla (p value < 0.001). Gender-wise and concerning age GT and GW are not significantly affected. A weak and positive correlation between GT and GW is noted (rho 0.30, p < 0.001). CONCLUSIONS: GT and GW present significant associations with arch and tooth-type. Findings from this study fulfil the further understanding of GT and GW of paediatric patients that are investigated sparsely throughout the literature and demonstrate an accurate, painless and simple method to map the gingiva.

How geographical origin and dietary habits interact with the shape of cortical mandibular sections? A geometric morphometrics study in an archaeological context.

OBJECTIVE: Mandibular shape is strongly influenced by biomechanics, particularly during dietary shifts that often occurred in past populations. The relationship is considered extremely complex as development of the mandible is a multifactorial process. Since cortical bone distribution is purportedly more biomechanically sensitive than external shape, comparison of its distribution in past populations can provide new input to understand this complex relationship. The present study examined the effects of geographical origin and dietary habits on the internal anatomy of the mandibular corpus and symphysis. DESIGN: A morphometric analysis was conducted on 72 mandibles from different populations, sampled by their geographical origin and subsistence strategies. Procrustes ANOVAs were performed to test the impact of section-plane location, geographical origin, and dietary habits on the groups' shapes. RESULTS: The specimens' geographical origin and dietary habits had a significant effect on the shapes of the sections (Generalized Goodall F-test, F = 3.2745, df = 6, 304: p < 0.001 and F = 3.7007, df = 4, 306: p < 0.001). CONCLUSION: Geographical origin and dietary habits influenced the shape of the mandibular sections in our sample. These relationships become more complex when analysed in isolated sections. Indeed, this study revealed that symphysis sections could be predominantly influenced by individual variables, whereas intermediate sections of the corpus could be predominantly influenced by populational variables. Future studies could focus on specific sections to better identify the specific "rules of dependence" in each cross-section.

Local factors relating to mandibular canine impaction: A retrospective study.

INTRODUCTION: This study aimed to investigate the characteristics of impacted and transmigrated mandibular canines and the association existing between them and some local factors, such as degrees of axial inclination of mandibular incisors, skeletal Class, and mandibular symphysis width. METHODS: A retrospective observational study was performed on the medical records and radiographic examination (panoramic radiographs and lateral cephalograms) of 102 orthodontic patients divided into a study group, with at least 1 impacted mandibular canine (51 subjects) and a control group, without mandibular impaction (51 subjects). A chi-square test, t test, and analysis of variance test analysis were used to analyze the data. RESULTS: Unilateral and buccal impaction and the presence of the deciduous canine were the more prevalent characteristics of impacted canines, whereas 39.2% presented transmigration. Furthermore, the persistence of the deciduous canine on the impaction side (P <0.0001) and the mesial axial inclination of the impacted canine (P <0.0001) were found to be statistically significant characteristics. A statistically significant association was found between the impaction of the mandibular canine and mandibular incisor to the mandibular plane angle (IMPA) (IMPA, 95.8°; P = 0.009). An additional statistically significant association was found with transmigrated canines (IMPA, 96.8°; P = 0.024). CONCLUSIONS: The mesialization of the canine cusp and the persistence of the mandibular deciduous canine are characteristics frequently found in the impaction of the mandibular canine. An accentuated vestibular inclination of the mandibular incisors is significantly associated with mandibular canine impaction.

Understanding the ant's unique biting system can improve surgical needle holders.

Mechanical grasping and holding devices depend upon a firm and controlled grip. The possibility to improve this gripping performance is severely limited by the need for miniaturization in many applications, such as robotics, microassembly, or surgery. In this paper, we show how this gripping can be improved in one application (the endoscopic needle holder) by understanding and imitating the design principles that evolution has selected to make the mandibles of an ant a powerful natural gripping device. State-of-the-art kinematic, morphological, and engineering approaches show that the ant, in contrast to other insects, has considerable movement within the articulation and the jaw´s rotational axis. We derived three major evolutionary design principles from the ant's biting apparatus: 1) a mobile joint axis, 2) a tilted orientation of the mandibular axis, and 3) force transmission of the adductor muscle to the tip of the mandible. Application of these three principles to a commercially available endoscopic needle holder resulted in calculated force amplification up to 296% and an experimentally measured one up to 433%. This reduced the amount of translations and rotations of the needle, compared to the needle's original design, while retaining its size or outer shape. This study serves as just one example showing how bioengineers might find elegant solutions to their design problems by closely observing the natural world.

Mandible mechanical properties and composition of the larval Glossosoma boltoni (Trichoptera, Insecta).

Insect feeding structures, such as mandibles, interact with the ingesta (food or/and substrate) and can be adapted in morphology, composition of material and mechanical properties. The foraging on abrasive ingesta, as on algae covering rocks, is particularly challenging because the mandibles will be prone to wear and structural failure, thus suggesting the presence of mandibular adaptations to accompany this feeding behavior. Adaptations to this are well studied in the mouthparts of molluscs and sea urchins, but for insects there are large gaps in our knowledge. In this study, we investigated the mandibles of a grazing insect, the larvae of the trichopteran Glossosoma boltoni. Using scanning electron microscopy, wear was documented on the mandibles. The highest degree was identified on the medial surface of the sharp mandible tip. Using nanoindentation, the mechanical properties, such as hardness and Young's modulus, of the medial and lateral mandible cuticles were tested. We found, that the medial cuticle of the tip was significantly softer and more flexible than the lateral one. These findings indicate that a self-sharpening mechanism is present in the mandibles of this species, since the softer medial cuticle is probably abraded faster than the harder lateral one, leading to sharp mandible tips. To investigate the origins of these properties, we visualized the degree of tanning by confocal laser scanning microscopy. The autofluorescence signal related to the mechanical property gradients. The presence of transition and alkaline earth metals by energy dispersive X-ray spectroscopy was also tested. We found Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Si, and Zn in the cuticle, but the content was very low and did not correlate with the mechanical property values.

External Validation of the Effect of the Combined Use of Object Detection for the Classification of the C-Shaped Canal Configuration of the Mandibular Second Molar in Panoramic Radiographs: A Multicenter Study.

INTRODUCTION: The purposes of this study were to evaluate the effect of the combined use of object detection for the classification of the C-shaped canal anatomy of the mandibular second molar in panoramic radiographs and to perform an external validation on a multicenter dataset. METHODS: The panoramic radiographs of 805 patients were collected from 4 institutes across two countries. The CBCT data of the same patients were used as "Ground-truth". Five datasets were generated: one for training and validation, and 4 as external validation datasets. Workflow 1 used manual cropping to prepare the image patches of mandibular second molars, and then classification was performed using EfficientNet. Workflow 2 used two combined methods with a preceding object detection (YOLOv7) performed for automated image patch formation, followed by classification using EfficientNet. Workflow 3 directly classified the root canal anatomy from the panoramic radiographs using the YOLOv7 prediction outcomes. The classification performance of the 3 workflows was evaluated and compared across 4 external validation datasets. RESULTS: For Workflows 1, 2, and 3, the area under the receiver operating characteristic curve (AUC) values were 0.863, 0.861, and 0.876, respectively, for the AGU dataset; 0.935, 0.945, and 0.863, respectively, for the ASU dataset; 0.854, 0.857, and 0.849, respectively, for the ODU dataset; and 0.821, 0.797, and 0.831, respectively, for the ODU low-resolution dataset. No significant differences existed between the AUC values of Workflows 1, 2, and 3 across the 4 datasets. CONCLUSIONS: The deep learning systems of the 3 workflows achieved significant accuracy in predicting the C-shaped canal in mandibular second molars across all test datasets.

How Does Intentional Apical Foraminal Enlargement Affect the Foramen and Root Canal Morphology?

INTRODUCTION: This study assessed the effect of intentional foraminal enlargement on the foramen and the apical root canal morphology. METHOD: Sixty mesial roots of mandibular molars were scanned by micro-computed tomography. Their apical foramina were photographed with a stereomicroscope before and after preparation. Three groups were formed (n = 20) according to the working length (WL). G-1: foramen - 1 mm; G0: foramen; and G+1: foramen + 1 mm. Each group originated 2 subgroups (n = 10): G-1: Buchanan's patency (size 10 K-type file) and foraminal debridement (sizes 20, 25 and 30 K-type files); G0 and G+1: rotary foraminal enlargement (ProDesign S size 25/.08) or reciprocating foraminal enlargement (R25). The area, perimeter, transportation, and noninstrumented walls of the foramen were evaluated. The root canal transportation and the centering index of preparation at 1, 3 and 5 mm from the foramen were also assessed. Data were compared statistically (α = 5%). RESULTS: The instruments used at the foramen and 1 mm beyond promoted foraminal enlargement and transportation. Regarding NIW, there was no difference between mechanized foraminal enlargements performed at the foramen or 1 mm beyond, similar to the manual foraminal debridement group (P > .05). There was no difference in transportation and centralization at 1-, 3-, and 5-mm apical levels, regardless of the instrumentation systems. CONCLUSION: Mechanical preparation at the foramen, or 1 mm beyond, resulted in foraminal enlargement, transportation and were not able to touch all root canal walls that delimit the foramen.

Evaluating the muscle attachment hypothesis for sagittal cresting in Gorilla and Pongo.

Primate mandibular morphology is often associated with jaw functionality of the masticatory complex in the context of variation in diets. Recent research into the disparities between the diet and jaw functionality in male and female hominoids is inconclusive and suggests that sexual dimorphism in the mandible may be influenced by external factors such as temporalis and masseter muscle morphology, which in turn may be influenced by sexual selection. As the muscles associated with mastication (i.e., the type of chewing exhibited by primates and other mammals) encompass the mandible as well as the neurocranium, including the sagittal crest among some individuals, this study investigates sex-specific associations between regions of the mandibular ramus and neurocranium associated with mastication in a dentally mature sample of Gorilla and Pongo. A total of four cranial and mandibular variables were measured in two Gorilla taxa (Gorilla gorilla gorilla and Gorilla beringei graueri) and one Pongo taxon (Pongo pygmaeus pygmaeus) (n = 220). For all three taxa, we investigate (a) whether the degree of sexual dimorphism in cranial regions associated with sagittal cresting (sagittal crest size (SCS) and temporalis muscle attachment area (TMAA)) is proportional to the degree of mandibular ramus area (MRA) and coronoid process height (CPH) sexual dimorphism, (b) whether there are sex differences in scaling relationships between TMAA and MRA, and (c) whether there are sex differences in the strength of association between TMAA and CPH. We show that for G. g. gorilla, variables associated with sagittal cresting show higher sexual dimorphism values than our two mandibular ramus variables, which is not the case for G. b. graueri or for P. p. pygmaeus. All three taxa show similar sex-specific scaling relationships between TMAA and MRA, where for males this relationship does not diverge from isometry, and for females there is a negative allometric relationship. Our findings also show intraspecific sex differences in allometric slopes between MRA and TMAA for all three taxa. Only G. g. gorilla shows a significant association between TMAA and CPH, which is observed in both sexes. Although there are some statistical associations between the cranial and mandibular regions associated with mastication, our results show that among male gorillas and orangutans, patterns of variation in the sagittal crest, TMAA, mandibular ramus and the coronoid process cannot be explained by the muscle attachment hypothesis alone. These findings have implications surrounding the associations between social behaviour and the morphology of the craniofacial complex.