Manufactured meals: The challenges of ultraprocessed foods.

In this Editorial on behalf of the PLOS Medicine Editors, Alexandra Tosun discusses how ultra-processed food has found itself at the center of a growing storm of criticism, the complexities of the ongoing nutrition debate and why stakeholders must be held to higher standards.

Ultraprocessed food (UPF), health, and mechanistic uncertainty: What should we be advising the public to do about UPFs?

In this perspective, we discuss why current mechanistic uncertainty on ultraprocessed foods (UPFs) and health acts as a major challenge to providing informed dietary guidelines and public advice on UPFs. Based on the balance of current evidence, we do not believe it is appropriate to be advising consumers to avoid all UPFs and we await further evidence to inform consumer guidance on the need to limit consumption of specifics foods based on their degree or type of processing.

The influence of temperature variation on the levels of the International Dysphagia Diet Standardization Initiative. / A interferência da variação da temperatura nos níveis da Iniciativa Internacional de Padronização de Dietas para Disfagia.

PURPOSE: To analyze the influence of temperature on the flow/texture of different foods, immediately after preparation and after one hour, and 2) To compare the influence of varying the cook in food preparation, in relation to food flow. METHODS: This is a quantitative and experimental study. The IDDSI standardized flow test was used to evaluate the remaining volume in the syringe and the levels of foods (porridge, smoothie, liquid soup, and pureed light soup) prepared by different cooks, in triplicate, at time zero (T0) and after one hour (T1). RESULTS: Differences in temperature were observed in all foods at T0 and T1 (p < 0.05). The IDDSI level changed only in porridge, from level 3 to 4 (p = 0.043). Modifications were observed in the preparation by different cooks for smoothie, on the 2nd and 3rd day (p = 0.049), from level 3 to 4 of IDDSI. In porridge, on the 1st and 3rd day (p = 0.048) and 2nd and 3rd day (p = 0.048), with a change from level 4 to 3 of IDDSI. CONCLUSION: The temperature of all foods differed within the one-hour interval, with modifications in the flow test and in the IDDSI levels, from level 3 to 4, only for porridge. Different cooks prepared the smoothie and porridge with different characteristics, resulting in changes from level 3 to 4 in both foods.

OBJETIVO: 1) Analisar a influência da temperatura no fluxo/textura dos diferentes alimentos, logo após o preparo e após uma hora, e 2) Comparar a influência de variar o cozinheiro no preparo dos alimentos, em relação ao fluxo dos alimentos. MÉTODO: Trata-se de um estudo quantitativo e experimental. Utilizou-se o teste de fluxo padronizado pelo IDDSI, para avaliar o volume restante da seringa e os níveis dos alimentos (mingau, vitamina, sopa líquida e sopa leve batida) preparados por diferentes cozinheiros, em triplicata, no tempo zero (T0) e após uma hora (T1). RESULTADOS: Foi observado diferenças na temperatura em todos os alimentos no T0 e T1 (p < 0,05). O nível do IDDSI mudou apenas no mingau, de nível 3 para 4 (p = 0,043). Modificações foram observadas no preparo por diferentes cozinheiros para vitamina, no 2° e 3° dia (p=0,049), do nível 3 para 4 do IDDSI. No mingau, no 1° e 3°dia (p=0,048) e 2°e 3° dia (p=0,048), com mudança de nível 4 para 3 do IDDSI. CONCLUSÃO: A temperatura de todos os alimentos foi diferente, no intervalo de uma hora, com modificações no teste de fluxo e nos níveis do IDDSI, do nível 3 para 4, apenas para o mingau. Diferentes cozinheiros prepararam a vitamina e o mingau com características diferentes, e consequente, mudanças do nível 3 para 4 em ambos os alimentos.

Assessing the cost barrier for small and medium food processing businesses to meet Preventive Controls for Human Foods standards.

The Preventive Controls for Human Food Rule regulation under the Food Safety Modernization Act sets new food safety standards. Both food safety educators and small and medium sized food processing businesses that manufacture certain value-added or processed foods lack knowledge regarding costs to prepare, implement, and manage ongoing food safety practices under the new standards. Current food safety training materials do not acknowledge costs or provide content addressing potential costs, and food safety educators do not have information needed to guide development of relevant materials that address costs. We combine economics and food science principles and use mixed methods to identify and estimate cost barriers for food processing businesses through an interdisciplinary research and extension project in the Northeast U.S. We first modify Preventive Controls extension programming to acknowledge costs and test how modified programming improves self-reported knowledge about costs. Materials that acknowledge that costs are associated with meeting standards significantly increases participants' self-reported perceived knowledge of costs by 1.3 points on a 1-to-5-point Likert scale. Compared with programming areas in which detailed content is provided, however, improvements in knowledge of costs lags behind overall knowledge gains (3.2 for costs versus 4.1 for food safety content). To fill this content gap, we next conduct semi-structured group interviews with a subset of participants (N = 10), develop a costs analysis framework, and measure actual costs associated with Preventive Controls. We find that initial costs average $20,000 per business to plan, implement, and manage standards, and almost $8,000 in every subsequent year to manage. We demonstrate that even modest interventions can reduce cost barriers for businesses seeking to meet compliance standards. We provide food safety educators with concrete cost information to support businesses to pursue Preventive Controls standards. Study results imply that low-cost methods could improve food safety in mid-scale supply chains.

Microbiological safety assessment of restaurants and HACCP-certified kitchens in hotels: A study in eastern China.

The Hazard Analysis and Critical Control Point (HACCP) system plays a crucial role in ensuring food safety within food service establishments, effectively reducing the risk of foodborne diseases. This study focused on assessing the risk of microbe contamination in poultry-based cook-served food during meal preparation in four restaurants and five selected HACCP-certified hotels in eastern China. We examined samples collected from 26 poultry-based cooked dishes, 248 food contact surfaces, 252 non-food contact surfaces, and 121 hand swabs. Our findings indicated a favorable trend of compliance with Chinese national standards, as Escherichia coli and Campylobacter were not detected in any cooked food samples. However, the microbiological assessments revealed non-compliance with total plate count standards in 7 % of the cooked samples from restaurants. In contrast, both dine-in hotels and restaurants exhibited significant non-compliance with guidance concerning food and non-food contact surfaces. Furthermore, our study found that chefs' hand hygiene did not meet microbiological reference standards, even after washing. Notably, Campylobacter persisted at 27 % and 30 % on chefs' hands, posing a significant risk of cross-contamination and foodborne diseases. These findings emphasize the urgent necessity for enhanced supervision of hygiene procedures and process monitoring in the HACCP-certified establishments engaged in the preparation and serving of food. Targeted interventions and food safety education for different chef subgroups can enhance food handling practices and reduce the risk of foodborne diseases in independent food establishments.

Mapping ultra-processed foods (UPFs) in India: a formative research study.

BACKGROUND: Increased consumption of ultra-processed foods (UPFs) which have additives such as artificial colours, flavours and are usually high in salt, sugar, fats and specific preservatives, are associated with diet-related non-communicable diseases (NCDs). In India, there are no standard criteria for identifying UPFs using a classification system based on extent and purpose of industrial processing. Scientific literature on dietary intake of foods among Indian consumers classifies foods as unhealthy based on presence of excessive amounts of specific nutrients which makes it difficult to distinguish UPFs from other commercially available processed foods. METHODS: A literature review followed by an online grocery retailer scan for food label reading was conducted to map the types of UPFs in Indian food market and scrutinize their ingredient list for the presence of ultra-processed ingredients. All UPFs identified were randomly listed and then grouped into categories, followed by saliency analysis to understand preferred UPFs by consumers. Indian UPF categories were then finalized to inform a UPF screener. RESULTS: A lack of application of a uniform definition for UPFs in India was observed; hence descriptors such as junk-foods, fast-foods, ready-to-eat foods, instant-foods, processed-foods, packaged-foods, high-fat-sugar-and-salt foods were used for denoting UPFs. After initial scanning of such foods reported in literature based on standard definition of UPFs, an online grocery retailer scan of food labels for 375 brands (atleast 3 brands for each food item) confirmed 81 food items as UPFs. A range of packaged traditional recipes were also found to have UPF ingredients. Twenty three categories of UPFs were then developed and subjected to saliency analysis. Breads, chips and sugar-sweetened beverages (e.g. sodas and cold-drinks) were the most preferred UPFs while frozen ready-to-eat/cook foods (e.g. chicken nuggets and frozen kebabs) were least preferred. CONCLUSION: India needs to systematically apply a food classification system and define Indian food categories based on the level of industrial processing. Mapping of UPFs is the first step towards development of a quick screener that would generate UPF consumption data to inform clear policy guidelines and regulations around UPFs and address their impact on NCDs.

Inadequate food safety knowledge and hygiene practices among street food vendors in Dhaka, Bangladesh.

Food safety remains a critical issue with outbreaks of foodborne illness. The knowledge gap of food safety and improper hygienic practices of food handlers are the key factors for the transmission of foodborne diseases. This study was conducted to investigate the level of food safety knowledge and practices among street food vendors in Dhaka City, Bangladesh, and its implications on consumers' health. This cross-sectional study was conducted among 350 respondents in seven areas of Dhaka City. Trained data collectors gather data by interviewing street vendors using a pretested questionnaire. Most of the vendors (98%) were male, with 48% having secondary education and 85% having no food safety training. Although about 89% of the vendors were found to practice hand washing, only a small proportion of them practised using hand gloves while handling raw products (5.6%), cleaning tables (2.2%), preparing foods (1.3%) or handling garbage (0.9%). The education level of the vendors and their work experience were significantly correlated with their hand washing practice, wearing hand gloves and their knowledge about food-borne illnesses. The study demonstrated that formal education played a significant role in vendors' knowledge and practice of health safety measures for food handlers to prevent foodborne illness. Effective food safety training and monitoring are needed to increase vendors' knowledge and practices, and in reducing foodborne diseases.

Towards tailored guidelines for microbial air quality in the food industry.

Airborne microorganisms in food processing environments pose a potential risk for food product contamination. Yet, the absence of established standards or guidelines setting quantitative limits on airborne microorganisms underscores a critical gap in current regulatory frameworks. This review seeks to explore the feasibility of establishing quantitative limits for airborne microorganisms in food processing facilities, aiming to provide evidence-based guidance to enhance food safety practices in the industry. The review begins by addressing the complexities of microbial air quality in the food industry through a general literature search covering sources of airborne microorganisms, factors affecting particle deposition, air sampling methods and preventive measures. Subsequently, it employs a structured approach to assess the significance of air quality and its impact on product quality. Utilizing the PRISMA method, relevant scientific literature from May 2002 to May 2022 was examined, resulting in 26 articles meeting inclusion criteria from a pool of 11,737 original research papers. Additionally, the review investigates existing probability models for assessing airborne contamination to enhance air quality risk assessment in food safety management systems. The literature reveals a lack of substantial evidence supporting a direct correlation between airborne microorganisms and food contamination. The absence of standardized air sampling methodologies in previous studies hinders the comparability and reliability of research findings. Additionally, the literature fails to establish a conclusive relationship between influencing factors such as total particle counts, temperature, relative humidity and airborne contamination. Contradictory probability models for quantifying airborne contamination, and the absence of tailored preventive measures, hinder effective control and undermine microbial contamination control in diverse food processing contexts. In conclusion, the development of numeric guidelines for airborne contamination necessitates a tailored approach, considering factors such as product characteristics and production context. By integrating risk assessment models into this process, a more thorough comprehension of contamination risks can be achieved, providing tailored guidance based on the identified risk levels for each product. Ongoing collaborative efforts are essential to develop evidence-based guidelines that effectively mitigate risks without incurring unnecessary costs.

Food safety in vulnerable populations: A perspective on the challenges and solutions.

Vulnerable populations are a particular group that are not capable of fending for themselves due to a number of limitations. Among many things, of particular concern is the food safety challenges faced by these individuals and the high risk of susceptibility to foodborne diseases. In this paper, an attempt is made to point out the various challenges faced by vulnerable populations that make them more susceptible to foodborne illness than other healthy adults. Also, the paper highlights possible improvement pathways through which these people can have access to safe and nutritious food, and the current interventional steps taken to address the food safety risk associated with food handling activities of food meant for vulnerable groups.

Assessment of hygiene practices and microbial safety of milk supplied by smallholder farmers to processors in selected counties in Kenya.

Smallholder farmers dominate the Kenyan dairy sector producing 95% of the total milk. However, several concerns have been raised on the quality and safety of the milk they produce. This study assessed the hygienic practices and microbial safety of milk supplied by smallholder farmers to processors in Bomet, Nyeri, and Nakuru counties in Kenya. Interviews and direct observations were carried out to assess hygiene and handling practices by farmers and a total of 92 milk samples were collected along four collection channels: direct suppliers, traders, cooperatives with coolers, and cooperatives without coolers. Microbial analysis was done following standard procedures and data analysed using GenStat and SPSS. This study revealed that farmers did not employ good hygienic practices in their routine dairy management. They used plastic containers for milking and milk storage (34.2%); they did not clean sheds (47.9%) and did not set aside cows that suffered from mastitis factors (83.6%), resulting in poor microbial quality of raw milk along the collection channels. The highest mean total viable counts (8.72 log10 cfu/ml) were recorded in Nakuru while Nyeri had the highest mean E. coli counts (4.97 log10 cfu/ml) and Bomet recorded the highest mean counts of 5.13 and 5.78 log10 cfu/ml for Staphylococcus aureus and Listeria monocytogenes respectively. Based on all above-mentioned parameters, the microbial load in most samples from all three counties exceeded the set Kenyan standards. Farmer training, improving road infrastructure, use of instant coolers at cooperatives, and quality-based payment systems are recommended as measures to curb microbial growth.

Effects of ethanol, activated carbon, and activated kaolin on perilla seed oil: Volatile organic compounds, physicochemical characteristics, and fatty acid composition.

Perilla seed oil (PSO) has a special aromatic odor, which is unpleasant to the personal preferences of some consumers. To this end, this article evaluated the differences in volatile organic compounds (VOCs), physicochemical characteristics, and fatty acid composition of PSO treated with ethanol (PSO-EA), activated carbon (PSO-AC), and activated kaolin (PSO-AK). The results showed that in the PSO, PSO-EA, PSO-AC, and PSO-AK samples, the content of linolenic acid, oleic acid, and linoleic acid hardly changed. Among the physicochemical characteristics of the four samples, the color difference between PSO and PSO-EA was greater than the color difference between PSO and PSO-AC, PSO-AK. The three treatment methods had the greatest impact on the PSO peroxide value but had little effect on other indicators. Gas chromatography-ion mobility spectrum results identified 28 known volatiles, of which aldehydes, alkenals, alcohols, ketones, and esters were the main groups. Fingerprint analysis found that PSO had an aromatic odor, which includes 1-hexanol, hexanal, and 2-pentylfuran; the removal effect of ethanol on VOCs in PSO was better than that of activated carbon and activated kaolin. The difference between the four oil samples was found from the strength of the VOCs' signals in a two-dimensional map. From the principal components analysis and the "nearest neighbor" fingerprint analysis, it was found that PSO is generally quite different from PSO-EA, PSO-AC, and PSO-AK, while in the "nearest neighbor" fingerprint analysis, PSO-AC and PSO-AK are similar in general. In short, PSO will have better applications in the food field. PRACTICAL APPLICATION: Treatment of PSO with ethanol, activated carbon, and activated kaolin is conducive to the comprehensive utilization of edible resources. In this work, ethanol, activated carbon, and activated kaolin were used to remove VOCs in PSO, and PSO-EA, PSO-AC, and PSO-AK were obtained. The perilla seed oil after these three treatment methods was tested for VOCs, physicochemical characteristics, and fatty acid composition. They can meet the needs of more consumers without affecting the fatty acid composition in the PSO, and have broad development prospects.

Effect of Revtech thermal processing on volatile organic compounds and chemical characteristics of split yellow pea (Pisum sativum L.) flour.

Yellow pea (Pisumsativum L.) is an economically rich source of nutrients with health-promoting effects. However, the consumption of pea ingredients is minimal due to their off-flavor characteristics. The present study investigated the effect of Revtech heat treatment on the chemical profile and volatile compounds in split yellow pea flour. Revtech treatment (RT) was applied at 140°C with a residence time of 4 min in dry condition (RT 0%) and in the presence of 10% steam (RT 10%). Both thermal treatments resulted in a significant reduction (p < 0.05) in lipoxygenase activity and the concentration of key beany-related odors such as heptanal, (E)-2-heptenal, 1-octen-3-ol, octanal, and (E)-2-octenal. In addition, RT 10% resulted in a significant reduction in pentanal, 1-penten-3-ol, hexanal, and 1-hexanol compared to untreated flour. The content of known precursors of lipoxygenase such as linoleic and linolenic acids was found in higher concentrations in heat-treated flours, indicating the efficacy of Revtech technology in minimizing the degradation of polyunsaturated fatty acids. No significant changes in the amino acid composition or the 29 selected phenolic compounds in pea flours were observed with Revtech processing except for two compounds, caffeic acid and gallocatechin, which were found at higher concentrations in RT 0%. PRACTICAL APPLICATION: Thermal processing of split yellow pea flours at 140°C using Revtech technology successfully decreased the concentrations of volatile compounds responsible for beany off-flavor while improving the nutritional quality of studied yellow pea flours. These results provide valuable information to the food industry for developing novel pulse-based products with enhanced sensory characteristics.

Listeriosis associated with pre-prepared sandwich consumption in hospital in England, 2017.

A case of listeriosis occurred in a hospitalised patient in England in July 2017. Analysis by whole genome sequencing of the Listeria monocytogenes from the patient's blood culture was identified as clonal complex (CC) 121. This culture was indistinguishable to isolates from sandwiches, salads and the maufacturing environment of Company X which supplied these products widely to the National Health Service. Whilst an inpatient, the case was served sandwiches produced by this company on 12 occasions. No other cases infected by this type were detected in the UK between 2016 and 2020. Between 2016 and 2020, more than 3000 samples of food, food ingredients and environmental swabs from this company were tested. Listeria monocytogenes contamination rates declined after July 2017 from 31% to 0.3% for salads and 3% to 0% for sandwiches. A monophyletic group of 127 L. monocytogenes CC121 isolates was recovered during 2016-2019 and was used to estimate the time of the most recent common ancestor as 2014 (95% CI of between 2012 and 2016). These results represent persistent contamination of equipment, food contact surfaces and foods at a food manufacturer by a single L. monocytogenes strain. Colonisation and persistent contamination of food and production environments are risks for public health.

Processing environment monitoring in low moisture food production facilities: Are we looking for the right microorganisms?

Processing environment monitoring is gaining increasing importance in the context of food safety management plans/HACCP programs, since past outbreaks have shown the relevance of the environment as contamination pathway, therefore requiring to ensure the safety of products. However, there are still many open questions and a lack of clarity on how to set up a meaningful program, which would provide early warnings of potential product contamination. Therefore, the current paper aims to summarize and evaluate existing scientific information on outbreaks, relevant pathogens in low moisture foods, and knowledge on indicators, including their contribution to a "clean" environment capable of limiting the spread of pathogens in dry production environments. This paper also outlines the essential elements of a processing environment monitoring program thereby supporting the design and implementation of better programs focusing on the relevant microorganisms. This guidance document is intended to help industry and regulators focus and set up targeted processing environment monitoring programs depending on their purpose, and therefore provide the essential elements needed to improve food safety.

Effects of preheating and drying methods on pyridoxine, phenolic compounds, ginkgolic acids, and antioxidant capacity of Ginkgo biloba nuts.

Although ginkgo nuts are very nutritious and loaded with numerous bioactive compounds, the nuts contain significant levels of unwanted compounds (ginkolic acids) which are toxic to consumption. To reduce or eliminate these toxic compounds without impacting the nutritional value and the bioactivity of the final product, an appropriate processing technology is needed. Thus, the effect of preheating (90 and 120°C) prior to drying (freeze drying: FD, hot air drying: HAD, and HAD in tandem with FD: HAD-FD) was evaluated on ginkgolic acids, pyridoxine analogues, phenolic compounds, and antioxidant properties of ginkgo nuts. Our results pointed out a significant decrease (below 50%) of ginkgolic acids in ginkgo nuts samples processed at 90°C compared to the control. The major compounds found after treatments were respectively, kaempferol (36.66-354.38 µg/g), quercetin (9.04-183.71 µg/g), and caffeic acid (19.66-106.88 µg/g). Principal component analysis (PCA) revealed that preheating at 90°C prior to HAD-FD would be a proper and reasonable approach for preserving the bioactive compounds and antioxidant capacity of ginkgo nuts (EC50 ranged from 2.25 to 4.60 mg/mL) while significantly reducing their content in toxic compounds.

Descriptive sensory analysis of instant porridge from stored wholegrain and decorticated pearl millet flour cooked, stabilized and improved by using a low-cost extruder.

Pearl millet flour, particularly wholegrain flour, is highly susceptible to development of rancid aromas and flavors during storage. Grain decortication and extrusion cooking using a friction-heated single-screw extruder were investigated as potential flour stabilization processes. Raw and extruded wholegrain and decorticated grain pearl millet flours were stored at ambient (25°C) and elevated (40°C) temperatures for 6 months. A trained descriptive sensory panel developed a lexicon of 44 attributes to profile the aroma, flavor, and texture of porridges prepared from the flours. Grain decortication alone did not show an effect on the aroma and flavor profile of porridge. Extrusion cooking of both wholegrain and decorticated flours increased cereal-like aromas (branny, canned sweetcorn, sweet, and wheaty) and flavor (starchy), as well as stiffness and cohesiveness of the porridges. The porridges from the extruded pearl millet flours stored for up to 6 months at ambient and elevated temperatures did not show any indications of rancidity. In contrast, rancidity-associated aromas (chemical, painty, and soapy) and flavor (chemical) increased in porridges from the raw flours stored for 4 weeks and longer. These results indicate that grain decortication did not sufficiently reduce fat content to prevent oxidation, while extrusion cooking stabilized the pearl millet flours. In addition, intensified "cereal-like" aromas and flavors were probably due to Maillard reactions occurring during extrusion cooking. Resulting aroma compounds could have been immobilized in the extruded matrix and not released during flour storage. The application of extrusion cooking with a simple friction-heated single-screw extruder is a viable process for both precooking and extending the shelf life of pearl millet flours. PRACTICAL APPLICATION: This study demonstrates the potential of extrusion cooking to precook wholegrain pearl millet while preventing fat rancidity in wholegrain pearl millet flour, thereby improving the sensory quality and stability of pearl millet food products. The extensive sensory characterization of pearl millet porridge-type foods can serve as a guidance tool for development, improvement, and quality control of pearl millet foods. Furthermore, it establishes the efficacy of simple friction-heated, single-screw extruders for commercial manufacture of ready-to-eat wholegrain pearl millet food products by small and medium scale entrepreneurs.

Comparison of free, conjugated, and insoluble-bound phenolics and their antioxidant activities in oven-drying and freeze-drying bamboo (Phyllostachys edulis) shoot tips.

Bamboo(Phyllostachys edulis) shoot was reported to be rich in phenolics. In the present study, free phenolics, conjugated phenolics, and insoluble-bound phenolics of oven-drying and freeze-drying bamboo shoot tips were extracted and separated, of which total phenolic content (TPC), total flavonoid content (TFC), and their antioxidant activities were determined. Phenolics of different binding forms were qualitatively analyzed using HPLC-ESI-QqQ-MS. A total of 22, 41, and 28 compounds were confirmed or tentatively identified in free, conjugated, and insoluble-bound phenolic extraction, respectively. The majority of the identified compounds were organic acids and phenolic acids. Oven-drying samples exhibited higher TPC (10.53-24.92 mg GAE/100 g DW) and TFC (5.80-33.27 mg CE/100 g DW) values, and stronger antioxidant activities (DPPH, ABTS, and FRAP) than freeze-drying (TPC: 1.67-15.28 mg GAE/100 g DW, TFC: 1.43-29.05 mg CE/100 g DW). Insoluble-bound phenolics were the major contributor to the total antioxidant activity. The present study investigated the phenolics composition and antioxidant activities of different binding forms in bamboo shoot tip comprehensively, and provided available information for their high-value deep-processing.

Widely targeted metabolomics analysis of white peony teas with different storage time and association with sensory attributes.

The sensory features of white peony teas (WPTs) significantly change with storage age; however, their comprehensive associations with composition are still unclear. This study aimed to clarify the sensory quality-related chemical changes in WPTs during storage. Liquid chromatography-tandem mass spectrometry based on widely targeted metabolomics analysis was performed on WPTs of 1-13 years storage ages. Weighted gene co-expression network analysis (WGCNA) was used to correlate metabolites with sensory traits including color difference values and taste attributes. 323 sensory trait-related metabolites were obtained from six key modules via WGCNA, verified by multiple factor analysis. The decline and transformation of abundant flavonoids, tannins and amino acids were related to the reduced astringency, umami and increased browning of tea infusions. In contrast, the total contents of phenolic acids and organic acids increased with storage. This study provides a high-throughput method for the association of chemical compounds with various sensory traits of foods.

Allergens from Edible Insects: Cross-reactivity and Effects of Processing.

PURPOSE OF REVIEW: The recent introduction of edible insects in Western countries has raised concerns about their safety in terms of allergenic reactions. The characterization of insect allergens, the sensitization and cross-reactivity mechanisms, and the effects of food processing represent crucial information for risk assessment. RECENT FINDINGS: Allergic reactions to different insects and cross-reactivity with crustacean and inhalant allergens have been described, with the identification of new IgE-binding proteins besides well-known pan-allergens. Depending on the route of sensitization, different potential allergens seem to be involved. Food processing may affect the solubility and the immunoreactivity of insect allergens, with results depending on species and type of proteins. Chemical/enzymatic hydrolysis, in some cases, abolishes immunoreactivity. More studies based on subjects with a confirmed insect allergy are necessary to identify major and minor allergens and the role of the route of sensitization. The effects of processing need to be further investigated to assess the risk associated with the ingestion of insect-containing food products.