Electrochemical Characterization of Isolated Nitrogenase Cofactors from Azotobacter vinelandii.

The nitrogenase cofactors are structurally and functionally unique in biological chemistry. Despite a substantial amount of spectroscopic characterization of protein-bound and isolated nitrogenase cofactors, electrochemical characterization of these cofactors and their related species is far from complete. Herein we present voltammetric studies of three isolated nitrogenase cofactor species: the iron-molybdenum cofactor (M-cluster), iron-vanadium cofactor (V-cluster), and a homologue to the iron-iron cofactor (L-cluster). We observe two reductive events in the redox profiles of all three cofactors. Of the three, the V-cluster is the most reducing. The reduction potentials of the isolated cofactors are significantly more negative than previously measured values within the molybdenum-iron and vanadium-iron proteins. The outcome of this study provides insight into the importance of the heterometal identity, the overall ligation of the cluster, and the impact of the protein scaffolds on the overall electronic structures of the cofactors.

Precise determination of the molybdenum isotopic composition of urine by multiple collector inductively coupled plasma mass spectrometry.

RATIONALE: Molybdenum (Mo) is predominantly expelled from the human body in urine. Consequently, urinary variability in the concentration and isotopic composition of Mo may encode valuable clinical information. To access this information, however, it is first necessary to develop and demonstrate a rapid, accurate and precise methodology capable of concentrating Mo from urine for isotope analysis. METHODS: The utility of N-benzoyl-N-phenylhydroxylamine (BPHA) to effectively separate and purify Mo from urine samples without the need for acid digestion was tested. Following this approach, applying a double-spike mass bias correction, we determined the Mo isotopic compositions of a set of urine samples by multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS). RESULTS: Based on replicate analyses of an in-house urine standard, this approach demonstrates an external precision on δ98/95 Mo values of better than 0.08‰ (2SD, n = 15). Application to a sample set collected from healthy individuals in Guangzhou, China, provides the first suite of δ98/95 Mo measurements from urine samples. Samples from the female participants show δ98/95 Mo (‰) values (1.31 ± 0.19‰, Ave ± 2SD, n = 14) that are consistently lower than those from the male participants (1.55 ± 0.16‰, Ave ± 2SD, n = 17). CONCLUSIONS: The employed methodology is suitable for rapid, low-blank and high-throughput Mo isotope analysis of urine samples. Although resolvable δ98/95 Mo variability is seen in this preliminary dataset, the mechanism driving this variability is unknown. High-precision Mo isotopic analysis might be added to the urinalysis tool-kit, with the potential to provide valuable clinical information in the future.

A compact solvent extraction based 99Mo/99mTc generator for hospital radiopharmacy.

A compact and portable 99Mo-99 mTc generator based on solvent-extraction, mimic to the conventional 99Mo-99 mTc alumina column generator is much-needed commodity for use in hospital radiopharmacy setup. The present study includes the development of a portable, simple and low cost 99Mo/99 mTc-generator based on MEK solvent extraction technique to obtain a very high concentration of no-carrier added (nca) 99 mTc solution, where low specific activity 99Mo source is obtained through 98Mo(n, γ)99Mo reaction in a research reactor. The unit is intended for operation under the conditions of medical radiological laboratories. Technical trials showed that the mean time of preparation of sodium [99mTc] pertechnetate radiopharmaceutical did not exceed 15 min. The quality and yield of 99 mTc-pertechnetate is upto the mark for formulation of radiopharmaceuticals.

Competitive adsorption and desorption of arsenate, vanadate, and molybdate onto the low-cost adsorbent materials alum water treatment sludge and bauxite.

When low-cost adsorbents are being used to remove contaminant ions (e.g. arsenate, vanadate, and molybdate) from wastewater, competitive adsorption/desorption are central processes determining their removal efficiency. Competitive adsorption of As, V, and Mo was investigated using equimolar oxyanion concentrations in single, binary, and tertiary combinations in adsorption isotherm and pH envelope studies while desorption of previously adsorbed oxyanions was examined in solutions containing single and binary oxyanion combinations. The low-cost adsorbent materials used were alum water treatment sludge (amorphous hydroxy-Al) and bauxite ore (crystalline Al oxides). Adsorption isotherm and pH envelope studies showed that Mo had only a small effect in decreasing adsorption of As and V but V and As had substantial and similar effects in reducing adsorption of the other. As had a greater effect than V in reducing adsorption of Mo and it was concluded that the affinity of oxyanions for the surfaces of water treatment sludge and bauxite followed the order As > V >> Mo. In 0.3 M NaCl electrolyte, desorption of previously adsorbed oxyanions amounted to 0.3-3.4% for V and As, and 11-20% for Mo. As had approximately four times greater effect than Mo in increasing desorption of V while V had about three times the effect of Mo in increasing desorption of As. Thus, the order of oxyanions in inducing desorption of the other oxyanions (i.e. As on V and As) was the same as that for adsorption selectivity: As > V >> Mo. Water treatment sludge was a more effective adsorbent than bauxite because it had a greater adsorption capacity for all three anions and, in addition, they were held more strongly so desorption in the background electrolyte was proportionately less. It was concluded that at similar molar concentrations, arsenate would tend to reduce adsorption of vanadate as well as displace vanadate already held on adsorbent surfaces while both anions will compete effectively with molybdate. The limiting factor for simultaneous removal of As, V, and Mo from multielement solutions by adsorption will therefore be the removal of Mo.

The Use of a Molybdenum Polyoxometalated Compound to Increase the Amount of Extractives from Wood Wastes.

The treatment of wood wastes of Castanea sativa L., Quercus frainetto, Larix decidua, and Paulownia tomentosa S. in autoclave in the presence of micrometric crystals of H3PMo12O40 showed an impressive increase of the amount of extractives. The extractives were mainly constituted of insoluble compounds that were analyzed by using gas chromatography-mass spectrometry (GC-MS) after acetylation. The GC-MS analysis of the chloroform soluble fraction of the extractives obtained from sativa showed the presence of methyl hexadecanoate and octadecanoic acid, that of the extractives of frainetto showed the presence of octadecanal and some long chain hydrocarbons. decidua extracts showed the presence of large amounts of sesamin, while the extractives of P tomentosa revealed the presence of 4-hydroxy-3,5-dimethoxybenzaldehyde, 4-hydroxy-3,5-dimethoxycimmanaldehyde, and relevant amounts of long chain hydrocarbons. The insoluble fraction showed the presence of relevant amounts of several carbohydrates and, in the case of C. sativa, of inositol.

Fractionated elution of 99Mo/99mTc generators using calibrated vials.

Fractionated elution consists in collecting the fractions of an eluate with the highest radioactive concentration. It may be useful to meet the requirements of a subset of clinical radiopharmacy procedures. This study aims to describe and evaluate straightforward procedures allowing to readily perform fractionated elution on dry and wet columns Mo/Tc generators by using calibrated vials. The main objectives of this study consisted in determining the relationship between eluate volume and elution yield using different vials calibration and assessing repeatability of the procedure. Elution vials were calibrated to obtain different eluate volumes by addition of air for wet column generator (WCG) and subtraction of saline for dry column generator (DCG) (n≥5 for each calibration). The relationship between the eluate volume and the elution yield was determined by a regression model for both DCG and WCG. Then repeatability evaluation was performed using 3-ml vial calibration. Relationships between the eluate volume (V) and the elution yield (Y) for DCG and WCG were Y=57.551 ln(V)+10.526 and Y=50.256 ln(V)+17.597, respectively. For repeatability assessment (n=30 for DCG and n=31 for WCG), the median volume and the interquartile range for DCG and WCG were 2.98 ml (2.92-3.01) and 3.28 ml (2.71-3.40), respectively, and median (interquartile range) eluate yields were 84.73% (81.30-86.33) and 81.78% (78.91-85.20), respectively. The volume was significantly higher for WCG than DCG (P=0.036) and also significantly more variable (P<0.001). The elution yield was significantly lower for WCG than DCG (P=0.025), but no difference in variability between the two generators was found (P=0.874). Easy-to-handle fractionated elution methods are compatible with both DCG and WCG. Fractionation using calibrated vials exhibits a better reproducibility with DCG than WCG generators and represents the only proposed method so far to master fractionated elution with DCG.

Changes in the fractionation profile of Al, Ni, and Mo during bioleaching of spent hydroprocessing catalysts with Acidithiobacillus ferrooxidans.

Spent hydroprocessing catalysts are known to contain a variety of potentially toxic metals and therefore studies on the bioavailability and mobility of these metals are critical for understanding the possible environmental risks of the spent catalysts. This study evaluates the different chemical fractions/forms of aluminium (Al), nickel (Ni), and molybdenum (Mo) in spent hydroprocessing catalyst and the changes they undergo during bioleaching with Acidithiobacillus ferrooxidans. In the spent catalyst (prior to bioleaching), Al was primarily present in its residual form, suggesting its low environmental mobility. However, Ni comprised mainly an exchangeable fraction, indicating its high environmental mobility. Molybdenum was mainly in the oxidizable form (47.1%), which indicated that highly oxidizing conditions were required to liberate it from the spent catalyst. During bioleaching the exchangeable, reducible and oxidizable fractions of all the metals were leached, whereas the residual fractions remained largely unaffected. At the end of bioleaching process, the metals remaining in the bioleached sample were predominantly in the residual fraction (98.3-99.5%). The 'risk assessment code' (RAC) and IR analysis also demonstrated that the environmental risks of the bioleached residue were significantly lower compared to the untreated spent catalyst. The results of this study suggest that bioleaching is an effective method in removing the metals from spent catalysts and the bioleached residue poses little environmental risk.

Impact of ageing on the fate of molybdate-zerovalent iron nanohybrid and its subsequent effect on cyanobacteria (Microcystis aeruginosa) growth in aqueous media.

Nanoscale zerovalent iron (nZVI) has been proposed to remediate heavy metal ions in the subsurface. However, the fate of metal-nZVI hybrid has not been fully investigated. In this study, we investigated (1) the long-term removal performance of nZVI for molybdate (Mo(VI)); (2) the relationship between the ageing of Mo-nZVI hybrid in specific solution chemistries and the remobilization of Mo(VI) from the hybrid; and (3) the effects of Mo-nZVI hybrid on cyanobacteria (Microcystis aeruginosa). Results showed that although common ions have limited influence on the removal ratio of Mo(VI) by nZVI, they do impact the structure evolution and transformation of the Mo-nZVI nanohybrid formed thereafter. Ageing time was crucial for the chemical stabilization of Mo-nZVI hybrid, but common groundwater ions retarded the stabilizing process, which may lead to a significant remobilization of Mo(VI) from the hybrid after exposure to water bodies. While low levels of Mo(VI) ions could stimulate the growth of M. aeruginosa, aged Mo-nZVI hybrid inhibited the growth of M. aeruginosa, except when ageing occurred in the presence of HPO42-/CO32- (which also retarded hybrid stabilization). This study shows that nZVI can immobilize Mo(VI) ions in groundwater, and the derived metal-nZVI hybrid can effectively suppress the potential growth of M. aeruginosa in river water.

A novel molybdenum disulfide nanosheet self-assembled flower-like monolithic sorbent for solid-phase extraction with high efficiency and long service life.

A novel material consisting of molybdenum disulfide (MoS2) nanosheet that self-assemble into flower-like microspheres which aggregate to form a monolithic matrix with a micro or nano-scaled mesopore structure was successfully synthesized and used as an efficient sorbent for solid-phase extraction (SPE) due to its large specific adsorption area and good stability. The extraction properties of the as-prepared sorbent were evaluated by high-performance liquid chromatography with variable wavelength detection (HPLC-VWD) by analyzing four flavonoids (apigenin, quercetin, luteolin, and kaempferol). Under optimal conditions, the LODs and LOQs were found to be in the ranges of 0.1-0.25 and 0.4-0.5µgL-1, respectively, and wide linear ranges were obtained with correlation coefficients (R) ranging from 0.9991 to 0.9996. Compared with commercial C18 and Alumina-N sorbents, the as-prepared sorbent showed high extraction efficiency at different concentrations of flavonoids. After 100 uses, the extraction ability of the self-assembled MoS2 nanosheet monolithic sorbent had no evident decline, denoting a long service life. Finally, the SPE-HPLC-VWD method using the as-prepared sorbent was applied to flavonoid analysis in beverage samples with satisfactory results.

Mechanochemical processing of molybdenum and vanadium sulfides for metal recovery from spent catalysts wastes.

This work describes the mechanochemical transformations of molybdenum and vanadium sulfides into corresponding molybdate and vanadate, to serve as a new environment-friendly approach for processing hazardous spent hydrodesulphurization (HDS) catalysts solid waste to achieve an easy recovery of not only molybdenum and vanadium but also nickel and cobalt. Co-grinding the molybdenum and vanadium sulfides with oxidants and sodium carbonate stimulates solid-state reactions without any heating aid to form metal molybdates and vanadates. The reactions proceed with an increase in grinding time and were enhanced by using more sodium carbonate and stronger oxidant. The necessary conditions for the successful transformation can be explained on the basis of thermodynamic analyses, namely a negative change in Gibbs free energy.

Preconcentration and determination of vanadium and molybdenum in milk, vegetables and foodstuffs by ultrasonic-thermostatic-assisted cloud point extraction coupled to flame atomic absorption spectrometry.

A new ultrasonic-thermostatic-assisted cloud point extraction procedure (UTA-CPE) was developed for preconcentration at the trace levels of vanadium (V) and molybdenum (Mo) in milk, vegetables and foodstuffs prior to determination via flame atomic absorption spectrometry (FAAS). The method is based on the ion-association of stable anionic oxalate complexes of V(V) and Mo(VI) with [9-(diethylamino)benzo[a]phenoxazin-5-ylidene]azanium; sulfate (Nile blue A) at pH 4.5, and then extraction of the formed ion-association complexes into micellar phase of polyoxyethylene(7.5)nonylphenyl ether (PONPE 7.5). The UTA-CPE is greatly simplified and accelerated compared to traditional cloud point extraction (CPE). The analytical parameters optimized are solution pH, the concentrations of complexing reagents (oxalate and Nile blue A), the PONPE 7.5 concentration, electrolyte concentration, sample volume, temperature and ultrasonic power. Under the optimum conditions, the calibration curves for Mo(VI) and V(V) are obtained in the concentration range of 3-340µgL(-1) and 5-250µgL(-1) with high sensitivity enhancement factors (EFs) of 145 and 115, respectively. The limits of detection (LODs) for Mo(VI) and V(V) are 0.86 and 1.55µgL(-1), respectively. The proposed method demonstrated good performances such as relative standard deviations (as RSD %) (≤3.5%) and spiked recoveries (95.7-102.3%). The accuracy of the method was assessed by analysis of two standard reference materials (SRMs) and recoveries of spiked solutions. The method was successfully applied into the determination of trace amounts of Mo(VI) and V(V) in milk, vegetables and foodstuffs with satisfactory results.

Separation of [(99m)Tc]pertechnetate and molybdate using polyethylene glycol coated C18 and C30 resins.

Hydrophobic adsorbents such as C18 and C30 were coated with PEG and subsequently used for the separation of Mo/Tc. The most effective resin for adsorbing PEG was the C18-U resin, which demonstrated a coating capacity of 97.6±2.8mg PEG per g of resin. The ability to adsorb pertechnetate was proportional to the amount of PEG coated on the hydrophobic resin. The [(99m)Tc]pertechnetate recovery during the separation of cyclotron produced (99m)Tc from (100)Mo was 91.8±0.3% (n=2). The resultant product met relevant USP monograph specifications.

Determinação de cobre e outros minerais em caprinos e ovinos criados no sertão do vale do rio São Francisco, Pernambuco / Determination of copper and other minerals in goats and sheep of the San Francisco river valley in Pernambuco, Brazil

Para a determinação dos teores de cobre e de seus antagonistas, foram utilizadas 160 amostras de soro e de fígados, de caprinos e ovinos enviados ao matadouro municipal de Petrolina. As amostras de fígado e soro foram correlacionadas para o mesmo animal, a fim de evitar erros na obtenção dos dados. No soro a atividade da ceruloplasmina foi determinada por método colorimétrico. Para a determinação dos minerais, as amostras foram diluídas de seis a vinte vezes com água Milli-Q. Para determinação das concentrações dos elementos minerais no fígado, as amostras foram digeridas até que se obtivesse uma solução que mantivesse os minerais da amostra inicial e que fosse totalmente liquida, sem a presença de partículas sólidas que pudessem obstruir os capilares de sucção do espectrômetro e assim impedir as leituras das amostras. As concentrações de cobre, molibdênio, ferro e zinco foram determinadas através de espectrometria óptica por emissão de plasma (ICP). Desta forma, foi conduzido o experimento objetivando determinar a ocorrência e distribuição da carência de cobre no território do sertão do vale do rio São Francisco em Pernambuco. Foi observado que não houve carência de cobre nesta região do estado de Pernambuco, quando se avaliou os níveis médios de cobre hepático,. Os níveis de zinco estavam dentro de um padrão de normalidade, enquanto que os níveis de ferro foram mais elevados em ovinos, e os níveis de molibdênio mais reduzidos em caprinos. Verificou-se também que a atividade de ceruloplasmina foi um indicador dos níveis séricos de cobre...

For the determination of copper concentration and its antagonists, 160 serum and liver samples were used, from goat and sheep sent to the municipal slaughterhouse of Petrolina. The samples were correlated with the same animal, in order to prevent errors in data collection. Serum ceruloplasmin activity was determined by colorimetric method. For determination of minerals, the samples were diluted six to twenty times with Milli-Q water. For determining concentrations of mineral elements in the liver, the samples were digested until achieving a solution that maintained the initial sample and minerals totally liquid, without the presence of solid particles which could clog the capillary suction of the spectrometer and prevent reading of samples. The concentrations of copper, molybdenum, iron and zinc were determined by optical emission spectrometry (ICP). Thus, the experiment was conducted to determine the occurrence and distribution of copper deficiency in the San Francisco valley of Pernambuco. No copper deficiency was revealed in this region of the state of Pernambuco, when the mean levels of hepatic copper were evaluated. Zinc levels were within a normal range, whereas iron levels were higher in sheep, and lower levels of molybdenum in goats. It was also found that the activity of ceruloplasmin was an indicator of serum copper...

Application of green seaweed biomass for MoVI sorption from contaminated waters. Kinetic, thermodynamic and continuous sorption studies.

Spongomorpha pacifica biomass was evaluated as a new sorbent for Mo(VI) removal from aqueous solution. The maximum sorption capacity was found to be 1.28×10(6)±1×10(4) mg kg(-1) at 20°C and pH 2.0. Sorption kinetics and equilibrium studies followed pseudo-first order and Langmuir adsorption isotherm models, respectively. FTIR analysis revealed that carboxyl and hydroxyl groups were mainly responsible for the sorption of Mo(VI). SEM images show that morphological changes occur at the biomass surface after Mo(VI) sorption. Activation parameters and mean free energies obtained with Dubinin-Radushkevich isotherm model demonstrate that the mechanism of sorption process was chemical sorption. Thermodynamic parameters demonstrate that the sorption process was spontaneous, endothermic and the driven force was entropic. The isosteric heat of sorption decreases with surface loading, indicating that S. pacifica has an energetically non-homogeneous surface. Experimental breakthrough curves were simulated by Thomas and modified dose-response models. The bed depth service time (BDST) model was employed to scale-up the continuous sorption experiments. The critical bed depth, Z0 was determined to be 1.7 cm. S.pacifica biomass showed to be a good sorbent for Mo(VI) and it can be used in continuous treatment of effluent polluted with molybdate ions.

Diversification of 99Mo/99mTc separation: non­fission reactor production of 99Mo as a strategy for enhancing 99mTc availability.

This paper discusses the benefits of obtaining (99m)Tc from non-fission reactor-produced low-specific-activity (99)Mo. This scenario is based on establishing a diversified chain of facilities for the distribution of (99m)Tc separated from reactor-produced (99)Mo by (n,γ) activation of natural or enriched Mo. Such facilities have expected lower investments than required for the proposed chain of cyclotrons for the production of (99m)Tc. Facilities can receive and process reactor-irradiated Mo targets then used for extraction of (99m)Tc over a period of 2 wk, with 3 extractions on the same day. Estimates suggest that a center receiving 1.85 TBq (50 Ci) of (99)Mo once every 4 d can provide 1.48-3.33 TBq (40-90 Ci) of (99m)Tc daily. This model can use research reactors operating in the United States to supply current (99)Mo needs by applying natural (nat)Mo targets. (99)Mo production capacity can be enhanced by using (98)Mo-enriched targets. The proposed model reduces the loss of (99)Mo by decay and avoids proliferation as well as waste management issues associated with fission-produced (99)Mo.

Development of a separation method for molybdenum from zirconium, niobium, and major elements of rubble samples.

A method for separation of Mo from Zr, Nb, and other major elements of rubble samples from the Fukushima Daiichi Nuclear Power Station (FDNPS) was developed to enable 93Mo assay of the rubble samples. Although (93)Mo analysis has been reported in a few studies, the known separation method is tedious and time consuming, or the target is a simple material. Therefore, a simple and rapid protocol for the separation of a complex material, i.e., the rubble sample, was developed in this study. Firstly, loss of Mo during the digestion of simulated rubble samples was evaluated. Next, weight distribution coefficients (Kd's) of Zr, Nb, and Mo between an extraction chromatographic resin (tetra valent actinide resin, TEVA resin) and acid solutions (HF-HCl and HF-HNO3 solutions) were determined to obtain suitable solution conditions for the separation of Mo from Zr and Nb. Based on the obtained Kd's, a chromatographic separation scheme was designed and applied to the digested solution of the simulated rubble sample. Consequently, Mo was successfully separated from Zr, Nb and other major metal ions of the simulated rubble sample.

Thickness sorting of two-dimensional transition metal dichalcogenides via copolymer-assisted density gradient ultracentrifugation.

Two-dimensional transition metal dichalcogenides have emerged as leading successors to graphene due to their diverse properties, which depend sensitively on sample thickness. Although solution-based exfoliation methods hold promise for scalable production of these materials, existing techniques introduce irreversible structural defects and/or lack sufficient control over the sample thickness. In contrast, previous work on carbon nanotubes and graphene has shown that isopycnic density gradient ultracentrifugation can produce structurally and electronically monodisperse nanomaterial populations. However, this approach cannot be directly applied to transition metal dichalcogenides due to their high intrinsic buoyant densities when encapsulated with ionic small molecule surfactants. Here, we overcome this limitation and thus demonstrate thickness sorting of pristine molybdenum disulfide (MoS2) by employing a block copolymer dispersant composed of a central hydrophobic unit flanked by hydrophilic chains that effectively reduces the overall buoyant density in aqueous solution. The resulting solution-processed monolayer MoS2 samples exhibit strong photoluminescence without further chemical treatment.

Cross-linked polyethylene glycol beads to separate 99mTc-pertechnetate from low-specific-activity molybdenum.

UNLABELLED: We report a kit-based approach for the purification of sodium pertechnetate ((99m)TcO4 (-)) from solutions with high MoO4 (2-) content. METHODS: Cross-linked polyethylene glycol resins (ChemMatrix) were used to separate (99m)Tc and molybdenum in 4N NaOH. The resins were loaded at various flow rates and eluted with water to release (99m)Tc. The (99m)Tc solution was passed through a cation exchange resin and an alumina cartridge, followed by saline elution. This process was tested with cyclotron-produced (99m)Tc using an automated system and disposable kits. RESULTS: Optimal results were obtained by loading 500 mg of resin at flow rates of up to 3.1 mL/min, with quantitative extraction of (99m)Tc from the molybdate solution and complete release of (99m)Tc after elution with water. The automated system was highly efficient at isolating Na(99m)TcO4 within minutes, with a recovery rate of 92.7% ± 1.1% (mean ± SD) using cyclotron-produced (99m)Tc. CONCLUSION: ChemMatrix resins were highly effective at separating (99m)TcO4 (-) from molybdate solutions.

The excitation functions of (100)Mo(p,x)(99)Mo and (100)Mo(p,2n)(99m)Tc.

Proton-induced nuclear reactions for generation of (99)Mo and (99m)Tc radionuclides were investigated using the stacked-foil activation technique on 99.05% enriched (100)Mo targets at energies up to Ep=21MeV. Excitation functions of the reactions (100)Mo(p,x)(99)Mo and (100)Mo(p,2n)(99m)Tc have been measured.