Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

Efficacy of electronic apex locators in comparison with intraoral radiographs in working length determination- a systematic review and meta-analysis.

BACKGROUND: Successful endodontic treatment needs accurate determination of working length (WL). Electronic apex locators (EALs) were presented as an alternative to radiographic methods; and since then, they have evolved and gained popularity in the determination of WL. However, there is insufficient evidence on the post-operative pain, adequacy, and accuracy of EALs in determining WL. OBJECTIVE: The systematic review and meta-analysis aims to gather evidence regarding the effectiveness of EALs for WL determination when compared to different imaging techniques along with postoperative pain associated with WL determination, the number of radiographs taken during the procedure, the time taken, and the adverse effects. METHODS: For the review, clinical studies with cross-over and parallel-arm randomized controlled trials (RCTs) were searched in seven electronic databases, followed by cross-referencing of the selected studies and related research synthesis. Risk of bias (RoB) assessment was carried out with Cochrane's RoB tool and a random-effects model was used. The meta-analysis was performed with the RevMan software 5.4.1. RESULTS: Eleven eligible RCTs were incorporated into the review and eight RCTs into the meta-analysis, of which five had high RoB and the remaining six had unclear RoB. Following meta-analysis, no significant difference in postoperative pain was found among the EAL and radiograph groups (SMD 0.00, CI .29 to .28, 354 participants; P value = 0.98). Radiograph group showed better WL accuracy (SMD 0.55, CI .11 to .99, 254 participants; P value = 0.02), while the EAL group had 10% better WL adequacy (RR 1.10, CI 1.03-1.18, 573 participants; P value = 0.006). CONCLUSION: We found very low-certainty evidence to support the efficacy of different types of EAL compared to radiography for the outcomes tested. We were unable to reach any conclusions about the superiority of any type of EAL. Well-planned RCTs need to be conducted by standardizing the outcomes and outcome measurement methods.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Comparison of the different methods of width estimation in unerupted canine and premolars.

BACKGROUND: There are different methods for determining the required space for unerupted teeth. However, the accuracy of these techniques varies depending on ethnic differences. Therefore, the current study was performed to compare the accuracy of four methods for estimating the mesiodistal width of unerupted canines and premolars in a population of northern Iran. METHODS: The present cross-sectional study was conducted on 50 pairs of dental casts of patients aged 12-24 years old. The mesiodistal width of the teeth was measured with a digital caliper by two observers (ICC < 0.9), and the mean value was recorded. The space required for eruption of canines and premolars was obtained by the Tanaka-Johnson formula and the Moyers tables and compared with the actual value by paired t test. RESULTS: The Tanaka-Johnson formula had overestimation in the maxilla and mandible, which was statistically significant (p < 0.001). The values obtained from the Moyers tables in different confidence levels were not accurate. However, the 65% level for the mandible had almost no difference from the actual value (P = 0.996 and r2 = 0.503). Furthermore, linear regression was obtained based on the total mesiodistal width of the maxillary first molar and mandibular central incisor (maxilla: Yx= 0.613X + 2.23 and mandible: Ym= 0.618X + 1.6) and the total mesiodistal width of the mandibular first molar and maxillary central incisor in each jaw (maxilla: Yx = 0.424X + 5.021 and mandible: Ym = 0.447X + 3.631). CONCLUSION: The Tanaka-Johnson method was overestimated in the population of northern Iran. The 85% and 75% confidence levels of the Moyers table have the best clinical results for the maxilla and mandible, respectively. Regression based on maxillary first molars and mandibular central incisors has better results.

Digital measurement of deciduous tooth dimensions in China: A cross-sectional survey.

OBJECTIVE: Crown dimensions data of deciduous teeth hold anthropological, forensic, and archaeological value. However, such information remains scarce for the Chinese population. This multi-center study aimed to collect a large sample of deciduous crown data from Chinese children using three-dimensional measurement methods and to analyze their dimensions. DESIGN: A total of 1592 children's deciduous dentition samples were included, and the sample size was distributed according to Northeast, North, East, Northwest, Southwest and South China. Digital dental models were reconstructed from plaster dental models. Independent sample t test, paired t test, principal component analysis (PCA), and factor analysis (FA) were used to analyze the tooth crown dimensions. RESULT: 18,318 deciduous teeth from 1592 children were included. Males exhibited slightly larger values than females. The range of sexual dimorphism percentages for each measurement was as follows: mesiodistal diameter (0.40-2.08), buccolingual diameter (0.13-2.24), and maxillogingival diameter (0.48-3.37). The FA results showed that the main trend of crown dimensions changes was the simultaneous increase or decrease in mesiodistal diameter, buccolingual diameter and maxillogingival diameter in three directions. CONCLUSION: This is the first large-scale survey of deciduous tooth crown dimensions in China, which supplements the data of deciduous tooth measurement and provides a reference for clinical application.

Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio.

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.

Morphometric variations and nonmetric anatomical traits or anomalies of the primary molar teeth, plus the molars' size thresholds for sex identification.

INTRODUCTION: Morphological and morphometric features of the teeth are of interest to various clinical and academic dental and medical fields including prosthodontics, orthodontics, anatomy and anthropology, pathology, archeology, and forensic dentistry. These have been more or less researched in the case of the permanent dentition. However when it comes to the primary dentition, the literature is scarce and controversial. No study worldwide exists on the cutoff points (thresholds) for sex identification; no study exists on metric or nonmetric traits of deciduous teeth in Iranians. Hence, the aim of the study was to assess both the metric and nonmetric traits of primary molars, as well as their cut-off points for sex identification. METHODS: In this epidemiological cross-sectional study, pretreatment casts of 110 children (51 boys and 59 girls) aged 6 to 12 years were collected. Maxillary and mandibular first and second primary molars were evaluated regarding their metric traits (mesiodistal and buccolingual widths) and 9 nonmetric traits (Accessory cusp on the upper D, Accessory cusp on the lower D, Fifth cusp on the upper E, Carabelli's cusp on the upper E, Protostylid on the lower E, Fifth cusp on the lower E, Sixth cusp on the lower E, Tuberculum intermedium [metaconulid] on the lower E, and Deflecting wrinkle on the lower E). ROC curves were used to identify cut-off points for sex determination as well as the usefulness of metric measurements for this purpose. Data were analyzed using independent-samples and paired-samples t-tests, McNemar, Fisher, and chi-square tests, plus Pearson and Spearman correlation coefficients (α = 0.05). RESULTS: All the primary molars' coronal dimensions (both mesiodistal and buccolingual) were extremely useful for sex identification (ROC curves, all P values ≤ 0.0000099). Especially, the mandibular primary molars (areas under ROC curves [AUCs] between 85.6 and 90.4%, P values ≤ 0.0000006) were more useful than the maxillary ones (AUCs between 80.4 and 83.1%, P values ≤ 0. 0000099). In the mandible, the first primary molar (maximum AUC = 90.4%) was better than the second molar (maximum AUC = 86.0%). The optimum thresholds for sex determination were reported. Sex dimorphism was significant in buccolingual and mesiodistal crown widths of all the primary molars (all P values ≤ 0.000132), but it was seen only in the case of 2 nonmetric traits: Deflecting wrinkle (P = 0.001) and Tuberculum intermedium (metaconulid, P = 0.029) on the lower Es, taking into account the unilateral and bilateral cases. The occurrence of nonmetric traits was symmetrical between the right and left sides (all P values ≥ 0.250). All mesiodistal and two buccolingual molar measurements were as well symmetrical (P > 0.1); however, two buccolingual measurements were asymmetrical: in the case of the maxillary E (P = 0.0002) and mandibular D (P = 0.019). There were three weak-to-moderate correlations between the nonmetric traits of the mandibular second molars (Spearman correlations between 22.7 and 37.5%, P values ≤ 0.045). Up to 6 concurrent nonmetric traits were observed in the sample, with 53.6% of the sample showing at least 2 concurrent nonmetric traits at the same time, without any sex dimorphism (P = 0.658). CONCLUSION: Sex dimorphism exists considerably in primary molars' sizes, but it is not as prevalent in their nonmetric traits or abnormalities. Primary molars' crown sizes are useful for sex identification; we calculated optimum cut-off points for this purpose, for the first time.

Evaluation of changes in root canal length and accuracy of the electronic apex locator during different stages of endodontic treatment and retreatment.

This study evaluated changes in the root canal length (RCL) and the accuracy of the electronic apex locator (EAL) during the different stages of endodontic treatment and retreatment. Fifty-six mesial root canals of mandibular molars were selected. The actual root canal length (AL) of the canals was obtained by inserting a size 15 hand file up to the apical foramen, under magnification. The electronic lengths were obtained at the "APEX" mark of Root ZX II, using an alginate model. Both measurements were performed at three different stages of the initial root canal treatment-unflared, flared, and concluded-and at two stages of retreatment, after achieving patency and repreparation. Data were statistically analyzed and the significance level established was 5%. All stages produced a significant reduction in the AL (p < 0.05). The greatest variation was observed between the unflared-flared stages (0.2 mm) and between concluded-patency stages (0.09 mm), with no difference between them (p > 0.05). The accuracy of Root ZX II was negatively affected after achieving patency, presenting statistically significant difference compared to the other stages (p < 0.05). A significant reduction in the RCL was observed along the different stages of endodontic treatment and retreatment. The EAL was accurate to measure the root canals in most stages, except after achieving patency for endodontic retreatment. Determining and monitoring the RCL is an essential step towards a favorable prognosis, since it reduced along the different stages evaluated. Root ZX II was not accurate for endodontic retreatment.

Can ultrasonography be used to determine working length in endodontic treatment? An in vitro study.

This study was conducted to evaluate efficacy of ultrasonography (USG) in determining working length in in-vitro conditions. Twenty five access cavities of maxillary incisor teeth were opened and actual working lengths (AWL) were measured with dental operating microscope. The working length were then measured with an electronic apex locator and USG. USG and apex locator measurements were statistically analyzed using one sample t-test and compared with AWL. The mean AWL measurment was 20.68 mm. USG measured the working length slightly longer (21.09 mm) than the measurements of apex locator (20.64 mm). Statistical analysis showed that the USG method provided similar measurements to electronic apex locators and with no statistical difference with actual working length (P < .05). USG emerges as a promising method for working length measurement that allows simultaneous visualization of root tip anatomy in cases where electronic apex locators may be insufficient and there is buccal cortical bone loss.

Correlation Theory of the Maxillary Central Incisor, Face and Dental Arch Shape in the Serbian Population.

Background and Objectives: According to the modified Williams theory, the shape of the maxillary central incisor corresponds to the shape of the maxillary alveolar ridge (dental arch) and the shape of the face. Moreover, the standards of beauty suggest that the center of the face of an individual with a full set of teeth should match the center of the maxillary and mandibular dental arches. The purpose of this study is to conduct a comparative cross-sectional study on the matching of the shape of the face, maxillary central incisor and maxillary dental arch as well as the matching of the midfacial line and dental arches in subjects with complete dentition. Materials and Methods: The study included 90 subjects of both sexes. The matching of the shape of the face and midfacial line, i.e., dental arches and maxillary incisors, was determined by analysing photographs, whereas the shape of the dental arch was determined by analysing plaster models. Results: No significant gender-related differences were found either in the shape of the maxillary central incisor that matched the shape of the maxillary dental arch (p = 0.349) or in the shape of the dental arch that matched the shape of the face (p = 0.697). However, a significant difference was noted in the shape of the teeth that matched the shape of the face (p = 0.043), which was more significantly impaired in men. In addition, the matching of the mid-face and the mid-dental arch was significantly greater in women (p = 0.016). Conclusions: The modified Williams theory was confirmed in most subjects, thus it can be considered a relevant guideline when determining the shape of teeth after their loss. The highest percentage of matching in both sexes was with the shape of the face and dental arch. There was no positive correlation between the middle of the maxillary and mandibular dental arch in most cases.

Influence of Embedding Medium on iPex Electronic Apex Locator Accuracy: An Ex Vivo Comparative Study Using Alginate, Saline, and Gelatin Models.

AIM: Accurate working length determination during root canal treatment is essential for achieving successful outcomes. This study aimed to evaluate the impact of embedding medium on the accuracy of iPex electronic apex locator (EAL). MATERIALS AND METHODS: Sixty-one extracted single-rooted teeth were decoronated and coronally flared with Gates-Glidden burs. Actual canal length (ACL) was obtained by introducing a size 8 K-file until its tip reached the most coronal border of the apical foramen. This step was performed thrice and then averaged. Deducting 0.5 mm from the ACL provided the working length (WL). The teeth were randomly placed in plastic containers filled with freshly mixed alginate, gelatin, or saline, with the lip clip placed in the medium. The blinded operator obtained electronic measurements using iPex by advancing a K-file with a size compatible with the canal attached to the file clip and advanced until the 0.0 mark, then withdrawn to the 0.5 mark. This step was performed thrice and then averaged. Data were analyzed using ANOVA and Tukey's post hoc test, with significance level set at 5% (α = 0.05). RESULTS: The mean difference between WL and iPex length obtained in the gelatin model was significantly longer than the difference with mean iPex length in alginate (p = 0.005) and in saline (p < 0.001). There was no significant difference between iPex readings obtained in alginate and saline (p = 0.249). CONCLUSION: The use of freshly mixed alginate or saline for ex vivo assessment of iPex is recommended, whereas the use of gelatin could increase the chances of readings longer than looked for. CLINICAL SIGNIFICANCE: Identifying the optimum embedding medium for ex vivo testing of EALs permits the comparison and assessment of several factors affecting EALs' precision under standardized conditions. This helps in understanding EAL performance in vivo and in optimizing its clinical utilization.

Correlation between head circumference and mesio-distal width of the maxillary central incisor: a cross sectional study among three different population groups.

The size and shape of a tooth vary between individuals of different ethnic groups and genders because of the influence of different genetic factors. The information regarding the different anatomical factors using maxillary anterior teeth is very scanty. Thus to give more clarity, a study was planned to assess the correlation between head circumference and tooth-mesiodistal width among children of different ethnic origins.The study was carried out on 210 children aged 7 to 12 years in schools at Abha, Saudi Arabia.The mesiodistal (MD) width of the central incisor was measured using a digital vernier caliper. A Meter tape ruler was used to measure the Head/Cephalic dimensions. The data obtained were subjected to statistical analysis using IBM SPSS 20.0, and the results were analyzed. It was found that mean MD tooth width and head circumference were maximum in Saudi children, followed by South Asian and Arab/African, with an insignificant statistical difference (p-value > 0.05). Correlation between MD dimensions of maxillary central incisor with head circumference was statistically significant (p-value < 0.05) among Saudi and South Asian populations, whereas statistically insignificant (p-value > 0.05) difference between Saudi and Arab/African populations. It was concluded that there exist the ethnic differences between tooth-mesiodistal width and head circumference dimensions of children. A positive correlation between head circumference and mesiodistal width of the central incisor was determined.

Evaluation of accuracy of an electronic apex locator in presence of sodium hypochlorite in primary teeth with and without resorption.

This study compared the accuracy of Root ZX mini apex locator in presence of sodium hypochlorite (NaOCl) in primary molars with and without apical resorption. Sixty-four extracted primary lower molar teeth with 32 root resorption and 32 without resorption were selected. To determine the actual working length (AWL), a K-file was inserted into the root canal until the tip of the file was visible at the major foramen or the resolution level. It was then withdrawn 1 mm. This value was recorded as AWL. The teeth were then divided subgroups (with/without NaOCl). To determine the electronic working length, a Root ZX mini apex locator in canals with/without NaOCl was used. A K-file was inserted into the canal to just beyond the foramen, as indicated by the flashing "APEX" bar, and the electronic working length was determined by subtracting 1 mm from this length. The deviation of the Root ZX mini measurement from the AWL was determined. Student's t-test was used for statistical analysis. In teeth with no resorption, the measurement accuracy rates (within+/-0.5 mm) of non-NaOCl and NaOCl groups were 84.37% and 81.25%, respectively (p > 0.05); within+/-1 mm, the non-NaOCl and NaOCl demonstrated 100% and 96.87% accuracy, respectively (p > 0.05). In teeth with resorption, the measurement accuracy rates (within+/-0.5 mm) was 81.25% for the non-NaOCl and 62.50% for the NaOCl, respectively (p < 0.05). The measurement accuracy rates (within+/-1 mm) of the non-NaOCl and NaOCl was 96.87% and 84.37%, respectively (p < 0.05). The presence of NaOCl in the root canal affected the accuracy of the Root ZX mini in primary teeth with apical resorption, but not in teeth without resorption.

The Effect of Coronal Pre-flaring and Type of Root Canal Irrigation on Working Length Accuracy Using Electronic Apex Locators.

Background: Successful root canal treatment is influenced by the apical extent of root canal preparation and the eventual root canal filling. Achieving the full working length until the apical constriction, which is usually 0.5 - 1 mm shorter than the anatomical apex, is crucial. Electronic apex locators were used to detect the working length more accurately. There are six generations of electronic apex locators in the market. The selection of the appropriate irrigation with each apex locator for accurate working length determination is not fully investigated. Methods: The actual working lengths of 120 freshly extracted human single-rooted teeth were measured and compared with their working lengths using 3 rd generation (Root ZX) followed by 6 th generation (Raypex 6) apex locators in dry medium, presence of 5.25% sodium hypochlorite, and 2% chlorhexidine, without coronal pre-flaring and after coronal pre-flaring using the same irrigating media. Data were collected, tabulated, and afterward analyzed using one-way ANOVA with post-hoc to evaluate the significant difference in average working length between actual working length, Root ZX, and Raypex 6 apex locator working lengths accuracy. Results: The significant results were shown in roots that were coronally pre-flared and their working lengths were measured in a dry medium using Raypex 6 apex locator. While using the Root ZX apex locator, the most accurate results were shown in roots that were coronally pre-flared and their working lengths were measured while using a chlorhexidine irrigating solution. Conclusions: It is concluded that it is very important to know the specific irrigating medium to be used with each specific electronic apex locator to achieve the most accurate working length results.

In Vitro Comparison of the Accuracy of Cone-Beam Computed Tomography Scanning and Electronic Apex Locators in Detection of Simulated Root Perforations in Different Localizations.

INTRODUCTION: This study aimed to compare the accuracy of cone-beam computed tomographic (CBCT) scanning and 2 different electronic apex locators (EALs) in the detection of simulated root canal perforations in different localizations. METHODS: Eighty human mandibular premolars were prepared and divided into 2 groups according to the localization of the perforation area, having a 1-mm diameter. The distance between the occlusal edge and the beginning of the perforation was measured under a stereomicroscope (actual working length) using 2 EALs (Propex II [Dentsply Maillefer, Ballaigues, Switzerland] and Dentaport ZX [J. Morita, Tokyo, Japan]) (electronic working length) and CBCT images (CBCT working length). The calculations were made by subtracting the actual working length from the electronic working length and the CBCT working length to determine the differences. RESULTS: In the apical third perforation group, there was a significant difference between Dentaport ZX and CBCT imaging. There was no significant difference between Dentaport ZX and Propex II and Propex II and CBCT measurements. In the middle third perforation group, Propex II was significantly more successful than CBCT imaging. In addition, there was no significance between the accuracy of Propex II in detecting the perforation area between the apical third perforation group and the middle third perforation group. CBCT imaging was more accurate in detecting the perforation area in the apical third perforation group than in the middle third perforation group. CONCLUSIONS: In cases in which the root canal perforation was in the apical third of the root, both the EAL and CBCT imaging were successful in determining the perforation area, whereas the success rate of all devices used in this study decreased when the perforation area was in the middle third of the root.

The difference distance between the apical foramen and the anatomical apex in primary teeth-An in vitro study.

INTRODUCTION: The apex area in the primary teeth changes continuously due to the physiologic resorption, therefore; the apical foramen (AF) may not correspond to the anatomic apex (AA), which gives a big challenge to achieve successful endodontic treatment. The aim of this research was to study the difference distance (DD) between the position of the AA and AF, besides the difference acceptance (DA) in primary teeth, and the effect of the following variables: root canal curvature, resorption degree, and canal size on DD and DA separately. METHODS: In this research, 180 root canals from 60 primary teeth were studied. Two lengths of each canal were measured by a K-file from a certain point in the crown; the first length was until the AA and the second was until the AF. Then DD was obtained by calculating the difference between those two lengths. Statistical analysis tests were done. A p value of <.05 was considered significant at a 95% confidence level. RESULTS: The percentage of canals with 0 mm DD was 34.4%, while it was 1.1% with DD of 6 mm. The percentages of acceptable ( ≤ 2 mm) and unacceptable ( > 2 mm) difference were 84.4% and 15.6%, respectively. There was a significant difference in the DD value between the three groups of curvature degree and the three groups of canal size. There was a significant difference between the DA in the three groups of canal size. CONCLUSION: DD has a wide variation value in primary teeth regardless of the degree of root resorption, which has not affected this value or the accepted difference; however, DD and acceptable difference values are somehow affected by the degree of root curvature and canal size. We recommend adding acceptable difference as a criterion when considering pulpectomy treatment in primary teeth.

Aging changes in maxillary anterior teeth in untreated individuals: an observational longitudinal study.

OBJECTIVE: The aging of the occlusion and tooth wears influence the smile design This study aimed at evaluating the aging changes of maxillary anterior teeth in nontreated subjects. METHODS: The sample comprised dental models of 23 subjects (13 male, 10 female) with normal occlusions, taken at 13 (T1), 17 (T2) and 61 (T3) years of age. The following variables were measured in the maxillary anterior teeth using digital dental models: crown width/height proportion, anterior view width, crown angulation, gingival and incisal steps between central/lateral incisors and central incisors/canines. Interphase comparisons were evaluated using repeated measures analysis of variance followed by Tukey tests or Friedman tests. Sexual differences were evaluated using t tests (P < 0.05). RESULTS: From 13 to 61 years of age, a decrease of crown width/height proportion (P = 0.008 and P = < 0.001, for the lateral incisor and canines, respectively) and mesiodistal angulation (P = < 0.001, P = 0.001 and P = 0.025 for the central incisor, lateral incisor and canines, respectively) of the maxillary anterior teeth were observed. The steps of the gingival margin and the incisal steps decreased with aging. CONCLUSIONS: From adolescence to late adulthood, untreated individuals with normal occlusions demonstrated changes in the maxillary anterior teeth that may impair the smile esthetics and attractiveness.

Measuring tooth size discrepancies using Bolton analysis: a comparative cross-sectional study among major ethnicity in Malaysia.

BACKGROUND: The Bolton analysis is one of the commonly used tooth size analysis or diagnostic tools in deriving a treatment plan for orthodontic patients. Many studies have indicated and concluded that normal measurements for one group should not be considered normal for other ethnic groups. The aims and objectives of this study were to investigate the applicability of Bolton's ratios in the orthodontic population of Malaysian main ethnics, Malay, Chinese, and Indians. Comparisons were made in terms of size and distribution of tooth size discrepancy in the Malaysian orthodontic population and the findings were converted in terms of millimeters. METHODS: Hundred fifty pre-orthodontic study casts comprised of 52 Malay, 54 Chinese, and 44 Indian patients were selected. Digital calipers (Fowler Pro-Max) linked to Hamilton Tooth Arch Software were used to measure the tooth width and ratios. Statistical analysis was carried out to test for gender differences (independent t-test), to identify the effects of malocclusion and ethnic groups (Two-way ANOVA), and to compare the means of the current study with Bolton's standards (one sample t-test). RESULTS: This study showed that there was no significant difference between the genders of the sample of each ethnicity. There was no correlation found between ethnic groups and malocclusion classes. There was a significant difference when comparing Bolton values with the Malay sample for both ratios. It was found that more Malay subjects presented with maxillary excess contrary to Chinese and Indians who presented more maxillary deficiency for the anterior and overall ratio. CONCLUSION: There was a significant difference found between the TSD of the three major ethnicities in Malaysia. The Bolton standards can be applied to Malaysian Chinese and Indians but not to Malays orthodontic populations for both anterior and overall ratios. Subsequently, a specific standard should be used for the Malays orthodontic population. It was found that more Malay subjects presented with maxillary excess contrary to Chinese and Indians who presented more maxillary deficiency for the anterior and overall ratio.

Geometric analysis of tooth size among different malocclusion groups in a Hispanic population.

INTRODUCTION: Tooth size ratio is important for optimal dentofacial esthetics, occlusal interdigitation, and postorthodontic treatment stability. Tooth geometry influences tooth size ratio; therefore, tooth size normative data may not be practical across diverse ethnic groups. This study aimed to determine whether there are significant differences in 3-dimensional tooth size among patients in the Hispanic population with Angle Class I, II, and III malocclusions. METHODS: The data were collected using intraoral scanned orthodontic study models representing Hispanic orthodontic patients with Angle Class I, II, and III malocclusions. The scanned models were digitized and transferred to a geometric morphometric system. Tooth sizes were determined, quantified, and visualized using contemporary geometric morphometric computational tools. RESULTS: Tooth size was determined for all teeth and showed a significant difference in 4 out of 28 teeth: Maxillary right first molar, mandibular left second molar, mandibular right first molar and mandibular right second molar. This significant difference was noted among females and affected different malocclusion groups. CONCLUSIONS: Tooth size discrepancy in the Hispanic population varies among malocclusion groups, and the variation is determined by the participant's gender.

In Vitro Evaluation of the Accuracy of Three Electronic Apex Locators Using Different Sodium Hypochlorite Concentrations.

Background and Objectives: The aim of this study was to compare the accuracy of three types of electronic apex locators (EALs) when two different concentrations of NaOCl irrigation solutions are used by two operators. Materials and Methods: After creating the access cavities for 20 single rooted extracted teeth, the actual canal length (ACL) of each canal was determined visually using a #10 file and magnification. The teeth were subsequently inserted in plastic molds filled with alginate. The electronic measurement of root canal length (EWL) was performed using three different electronic apex locators: Root ZX II, Apex ID, and Dual Pex. Two independent operators, an endodontic specialist with 20 years practice and an undergraduate student in the final year of study, performed the irrigation procedures with two different concentrations of NaOCl (2% and 5.25%), and then measured the EWL using each of the EALs. The accuracy of all EALs, was determined in each case by subtracting the EWL from the ACL. Statistical analyses were performed using one-way ANOVA test. Results: In the presence of 2% NaOCl solution, for a margin error of ±0.5 mm, Root ZX II, Apex ID, and Dual Pex presented an accuracy of 90%, 80%, and 85% respectively. The increase in the concentration of the irrigation solution affected the accuracy of Root ZX II and Apex ID for both operators, diminishing it to 75% for the same margin error, but improved Dual Pex's accuracy to 100%. Conclusions: The best accuracy in working length determination was obtained by Root ZX II for 2% NaOCl solution and by Dual Pex for 5.25% NaOCl solution with no significant statistical difference when compared.