Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Efficacy of electronic apex locators in comparison with intraoral radiographs in working length determination- a systematic review and meta-analysis.

BACKGROUND: Successful endodontic treatment needs accurate determination of working length (WL). Electronic apex locators (EALs) were presented as an alternative to radiographic methods; and since then, they have evolved and gained popularity in the determination of WL. However, there is insufficient evidence on the post-operative pain, adequacy, and accuracy of EALs in determining WL. OBJECTIVE: The systematic review and meta-analysis aims to gather evidence regarding the effectiveness of EALs for WL determination when compared to different imaging techniques along with postoperative pain associated with WL determination, the number of radiographs taken during the procedure, the time taken, and the adverse effects. METHODS: For the review, clinical studies with cross-over and parallel-arm randomized controlled trials (RCTs) were searched in seven electronic databases, followed by cross-referencing of the selected studies and related research synthesis. Risk of bias (RoB) assessment was carried out with Cochrane's RoB tool and a random-effects model was used. The meta-analysis was performed with the RevMan software 5.4.1. RESULTS: Eleven eligible RCTs were incorporated into the review and eight RCTs into the meta-analysis, of which five had high RoB and the remaining six had unclear RoB. Following meta-analysis, no significant difference in postoperative pain was found among the EAL and radiograph groups (SMD 0.00, CI .29 to .28, 354 participants; P value = 0.98). Radiograph group showed better WL accuracy (SMD 0.55, CI .11 to .99, 254 participants; P value = 0.02), while the EAL group had 10% better WL adequacy (RR 1.10, CI 1.03-1.18, 573 participants; P value = 0.006). CONCLUSION: We found very low-certainty evidence to support the efficacy of different types of EAL compared to radiography for the outcomes tested. We were unable to reach any conclusions about the superiority of any type of EAL. Well-planned RCTs need to be conducted by standardizing the outcomes and outcome measurement methods.

Digital measurement of deciduous tooth dimensions in China: A cross-sectional survey.

OBJECTIVE: Crown dimensions data of deciduous teeth hold anthropological, forensic, and archaeological value. However, such information remains scarce for the Chinese population. This multi-center study aimed to collect a large sample of deciduous crown data from Chinese children using three-dimensional measurement methods and to analyze their dimensions. DESIGN: A total of 1592 children's deciduous dentition samples were included, and the sample size was distributed according to Northeast, North, East, Northwest, Southwest and South China. Digital dental models were reconstructed from plaster dental models. Independent sample t test, paired t test, principal component analysis (PCA), and factor analysis (FA) were used to analyze the tooth crown dimensions. RESULT: 18,318 deciduous teeth from 1592 children were included. Males exhibited slightly larger values than females. The range of sexual dimorphism percentages for each measurement was as follows: mesiodistal diameter (0.40-2.08), buccolingual diameter (0.13-2.24), and maxillogingival diameter (0.48-3.37). The FA results showed that the main trend of crown dimensions changes was the simultaneous increase or decrease in mesiodistal diameter, buccolingual diameter and maxillogingival diameter in three directions. CONCLUSION: This is the first large-scale survey of deciduous tooth crown dimensions in China, which supplements the data of deciduous tooth measurement and provides a reference for clinical application.

Can ultrasonography be used to determine working length in endodontic treatment? An in vitro study.

This study was conducted to evaluate efficacy of ultrasonography (USG) in determining working length in in-vitro conditions. Twenty five access cavities of maxillary incisor teeth were opened and actual working lengths (AWL) were measured with dental operating microscope. The working length were then measured with an electronic apex locator and USG. USG and apex locator measurements were statistically analyzed using one sample t-test and compared with AWL. The mean AWL measurment was 20.68 mm. USG measured the working length slightly longer (21.09 mm) than the measurements of apex locator (20.64 mm). Statistical analysis showed that the USG method provided similar measurements to electronic apex locators and with no statistical difference with actual working length (P < .05). USG emerges as a promising method for working length measurement that allows simultaneous visualization of root tip anatomy in cases where electronic apex locators may be insufficient and there is buccal cortical bone loss.

Correlation between head circumference and mesio-distal width of the maxillary central incisor: a cross sectional study among three different population groups.

The size and shape of a tooth vary between individuals of different ethnic groups and genders because of the influence of different genetic factors. The information regarding the different anatomical factors using maxillary anterior teeth is very scanty. Thus to give more clarity, a study was planned to assess the correlation between head circumference and tooth-mesiodistal width among children of different ethnic origins.The study was carried out on 210 children aged 7 to 12 years in schools at Abha, Saudi Arabia.The mesiodistal (MD) width of the central incisor was measured using a digital vernier caliper. A Meter tape ruler was used to measure the Head/Cephalic dimensions. The data obtained were subjected to statistical analysis using IBM SPSS 20.0, and the results were analyzed. It was found that mean MD tooth width and head circumference were maximum in Saudi children, followed by South Asian and Arab/African, with an insignificant statistical difference (p-value > 0.05). Correlation between MD dimensions of maxillary central incisor with head circumference was statistically significant (p-value < 0.05) among Saudi and South Asian populations, whereas statistically insignificant (p-value > 0.05) difference between Saudi and Arab/African populations. It was concluded that there exist the ethnic differences between tooth-mesiodistal width and head circumference dimensions of children. A positive correlation between head circumference and mesiodistal width of the central incisor was determined.

Geometric analysis of tooth size among different malocclusion groups in a Hispanic population.

INTRODUCTION: Tooth size ratio is important for optimal dentofacial esthetics, occlusal interdigitation, and postorthodontic treatment stability. Tooth geometry influences tooth size ratio; therefore, tooth size normative data may not be practical across diverse ethnic groups. This study aimed to determine whether there are significant differences in 3-dimensional tooth size among patients in the Hispanic population with Angle Class I, II, and III malocclusions. METHODS: The data were collected using intraoral scanned orthodontic study models representing Hispanic orthodontic patients with Angle Class I, II, and III malocclusions. The scanned models were digitized and transferred to a geometric morphometric system. Tooth sizes were determined, quantified, and visualized using contemporary geometric morphometric computational tools. RESULTS: Tooth size was determined for all teeth and showed a significant difference in 4 out of 28 teeth: Maxillary right first molar, mandibular left second molar, mandibular right first molar and mandibular right second molar. This significant difference was noted among females and affected different malocclusion groups. CONCLUSIONS: Tooth size discrepancy in the Hispanic population varies among malocclusion groups, and the variation is determined by the participant's gender.

Using a digital platform to establish odontometric variation based on race, gender and Angle classification.

Orthodontists often encounter significant clinical challenges in the finishing stages of treatment due to a disproportion in interarch tooth size relationships. Despite the increasing presence of digital technology and concomitant focus on customized treatment approaches, there is a gap in the knowledge of how generating tooth size data using digital versus traditional methods may impact our treatment regime. OBJECTIVE: This study aimed to compare the prevalence of tooth size discrepancies using digital models and a digitally based cast analysis in our cohort based on (i) Angle's Classification; (ii) gender and (iii) race. MATERIALS AND METHODS: The mesiodistal widths of teeth in 101 digital models were assessed using computerized odontometric software. A Chi-square test was used to determine the prevalence of tooth size disproportions among the study groups. The differences between all three groups of the cohort were analysed using a three-way analysis of variance (ANOVA). RESULTS: An overall Bolton tooth size discrepancy (TSD) prevalence of 36.6% was observed in our study cohort; 26.7% had an anterior Bolton TSD. No differences existed in the prevalence of tooth size discrepancies between male and female subjects as well as between the different malocclusion groups (P > .05). Caucasian subjects had a statistically significant smaller prevalence of TSD compared to Black and Hispanic patients (P < .05). CONCLUSION: The prevalence results in this study illuminate how relatively common TSD is and underscores the importance of proper diagnosis. Our findings also suggest that racial background may be an influential factor in the presence of TSD.

Maxillary lip dynamics and gingival display revisited: Utilizing standardized metrics.

OBJECTIVE: This study was initiated to validate a predictable system for establishing maximum maxillary lip dynamics and highlight the clinical significance of the findings. MATERIALS AND METHODS: Seventy-five subjects, ranging in age from 25 to 71 years old were photographed with lips in maximum and minimum reveal. The images were digitally analyzed using set references. The statistical analysis was performed using Meta. Numerics version 4.1.4. A Pearson correlation coefficient (r) was carried out to identify relationships between age and maxillary lip dynamics. A p-value less than or equal to 0.05 was considered to be significant. RESULTS: A greater percentage of participants have posterior gingival display than anterior gingival display. There is greater movement of the maxillary lip at the cuspid than at the central incisor. CONCLUSION: There was a tendency for lip dynamics to increase at the right central incisor when there is an increase in lip dynamics at the right cuspid. Lip dynamics does not appear to decrease with age. CLINICAL SIGNIFICANCE: Accurately recording and considering maximum lip dynamics helps avoid asymmetric, excessive or insufficient gingival architecture, insufficient or excessive tooth length and visible restorative margins.

Polymorphisms in hormonal-related genes might be associated with variations in permanent tooth crown size.

BACKGROUND: The variability in tooth crown size (TCS) is influenced by genetic factors and might be regulated by the difference in hormonal response. MATERIALS AND METHODS: This study aimed to evaluate the association between variations in TCS of permanent teeth with associated factors and genetic polymorphisms in hormonal-related genes (ESR1, ESR2 and PTH). This cross-sectional study involved dental casts from 86 individuals of both sexes. Dental casts were used to determine the maximum TCS of all fully erupted permanent teeth (except third molars) in the mesiodistal (MD) and buccolingual (BL) dimensions. Data such as sex, ethnicity, dental group (incisor, canine, premolar and molar), dental arch (upper and lower) and genetic polymorphisms of hormonal-related genes were used. The DNA from each patient was collected to evaluate the genetic polymorphisms in ESR1 (rs2234693 and rs9340799), ESR2 (rs1256049 and rs4986938) and PTH (rs694, rs6256 and rs307247) through real-time PCR. The data were submitted to statistical analysis with a significance level of 0.05. RESULTS: In the MD dimension, the sex, dental group and dental arch were associated with variation in TCS (P < .05). In the BL dimension, the sex, dental group, dental arch and polymorphism in rs694 and rs307247 were associated with variation in TCS. CONCLUSIONS: In short, this study suggests that genetic polymorphisms of PTH are associated with variations in the BL TCS of permanent human teeth.

Prediction of mesio-distal dimensions of the unerupted permanent canines and premolars using measurements of different groups of erupted teeth: retrospective cross-sectional analysis of digital records in Western Australians.

PURPOSE: Recently, other combinations of teeth are claimed to be better predictors for size estimation of permanent canine and premolars. The present study aimed to determine which combinations of teeth presented an appropriate predictor in Western Australians using digital technology. METHODS: A total of 500 (323 females, 177 males) participants meeting the inclusion criteria were randomly selected from private orthodontic clinics. Mesiodistal dimensions of selected teeth obtained from pre-orthodontic treatment digital records were analyzed using SPSS 20. Fifteen possible combinations of teeth were used to determine the best prediction capability. RESULTS: Different combinations of teeth showed a higher correlation with the sum of permanent canine and premolars. In females, group 13 (Mandibular incisors and maxillary first molars) and in males, group 15 (mandibular incisors, maxillary central incisors, and first molars) and group 14 (mandibular incisors and first molars) showed a higher correlation in maxilla and mandible respectively. Linear regression equations were developed based on the best predictor for each arch and gender. CONCLUSION: Permanent mandibular incisors may not be better predictors when used alone. Newly developed equations, based on different combinations of teeth, more accurately predicted the sum of mesiodistal dimensions of permanent canine and premolars in the Western Australian population.

Accuracy of the KontrolFlex AccuFile when used with the Root ZX electronic apex locator in vitro.

The aims of this study were to determine the efficacy of the KontrolFlex™ Accufile™ compared to the READY•STEEL™ Flexofile® using an electronic apex locator and to evaluate the instrument's design via scanning electron microscopy. Actual canal lengths of 30 extracted teeth were determined under magnification. An alginate model was used to determine experimental canal lengths with the Root ZX II apex locator (EAL) and size #10 Accufiles and Flexofiles. Differences between actual lengths and experimental lengths were compared with Student's t test. The average experimental lengths were short of the actual length by -0.10 mm (±0.34) and -0.12 mm (±0.16) for the Accufile and Flexofile, respectively with no statistical difference (p > 0.05). SEM images revealed similar non-cutting Batt tips and a square cross-section for the Accufile and triangular for the Flexofile. Both files provided similarly high levels of reliability when used with the Root ZX II EAL.

Working length determination in primary teeth pulpectomy: A systematic review and meta-analysis.

The present meta-analysis aimed to describe the methods to determine the working length in primary teeth pulpectomy, also evaluating and comparing their reliability. A systematic review was performed following the PRISMA Statement. The electronic search was conducted on PubMed, Scopus, Cochrane Library and Web of Science. After the screening protocol, a number of 14 studies were included in the qualitative analysis, while seven were included in the quantitative one. The mean working length determined by the electronic apex locator was 11.8 mm (9.0-15.55), while 12.42 mm (11.0-13.52) and 12.3 mm (9.73-15.93) were the mean working length observed with the conventional radiography and the digital radiography, respectively. No statistically significant difference was detected in quantitative analysis between the investigated methods. The present meta-analysis showed that electronic apex locator, conventional radiography and digital radiography are similar in determining working length in primary teeth.

Reconsideration of Leeway Space Calculated Using Models from Same Patients at Different Growth Stages.

In this study, original leeway space was determined using plaster models prepared from the same individuals over successive years and compared with that reported in an earlier study. The plaster models used for measurement were prepared from a normal dentition group comprising 64 patients and a crowded dentition group comprising 29. The mesiodistal crown width of the deciduous canines, deciduous first molars, and deciduous second molars, as well as that of the canines, first premolars, and second premolars was measured. Leeway space was then calculated and the results compared with that previously reported. The average maxillary and mandibular leeway spaces calculated in the same individuals were 1.46 and 2.66 mm, respectively, whereas those calculated from data collected from different individuals were 0.89 and 2.83 mm, respectively. No direct statistical comparison of leeway space between this and the earlier report was possible. The present results did indicate, however, that it was larger in the maxilla than previously reported. A larger leeway space is advantageous for the normal arrangement of the permanent teeth. While the mesiodistal crown width of some of the lateral segment teeth in the present study was significantly larger in boys than in girls, no significant difference was observed in leeway space between sexes. The mesiodistal width was larger in multiple permanent teeth such as canines in the crowded dentition group, and this difference was significant in boys. On the other hand, no difference was observed in mesiodistal width in the deciduous teeth between the two groups. These results showed a tendency toward larger teeth and less leeway space in the permanent dentition in the crowded dentition group, which may have been a factor in why such crowding occurred.

Size estimation of unerupted canines and premolars using various independent variables: a systematic review.

INTRODUCTION: Prediction of unerupted permanent teeth is an essential part of orthodontic diagnosis and treatment planning. This prediction is done by mixed dentition space analysis based on the estimation of mesiodistal dimensions of unerupted permanent canine and premolars from already erupted permanent teeth. Permanent mandibular incisors are most commonly used for prediction. Recent literature reveals that mandibular incisors are not accurate predictors and other independent variables have been introduced to make a more accurate and precise prediction. The objective of this paper was to evaluate the literature in light of a variety of independent variables and their predictive accuracy. METHODS: Electronic databases such as MEDLINE, PubMed, Scopus, Embase, Web of Science, CINAHL Plus were searched to identify articles published until September 2021. RESULTS: The search resulted in a total of 1098 articles, of which 24 papers met our inclusion criteria and were included in this review. Articles using permanent mandibular incisors only as a predictor were excluded during the eligibility assessment. The results show that various independent variables including mesiodistal and vestibulo-oral dimensions of permanent maxillary and mandibular incisors and molars, molar basal arch length, intermolar distance, maxillary and mandibular arch and gender have been used as predictors to more accurately determine mesiodistal width of unerupted canine and premolars in different populations. CONCLUSION: Ethnic tooth size variations strongly emphasize the need to determine which independent variable gives a more accurate prediction of unerupted permanent teeth to develop a population-specific prediction model. This will play a significant role in managing space problems and developing malocclusions.

The assessment of Golden and Red Proportions among a North-African population.

INTRODUCTION: The constant increase of both esthetic demands and advancement in materials and technologies have led to the development of guidelines to achieve optimal aesthetic results. These tools are useful to predict the teeth proportion and dimensions. Golden and Red proportion are the most described theories. AIM: of present study was to evaluate the existence of both Golden and Red proportion in the maxillary anterior teeth among a North-African population. METHODS: This was an observational study performed at the Fixed Prosthetic department of the dental clinic of Monastir, Tunisia. The study included participants with full intact anterior dentition. Those with diastema or teeth crowding were excluded. For each one, an alginate impression was done. Measures were, including the perceived width and length, have been taken on casts using digital caliper. Width ratios of maxillary lateral incisor to maxillary central incisor and lateral incisor to canine were calculated. RESULTS: The study included 100 Tunisian participants including 97 females and 21 males. The maxillary central incisors were the largest (8.60±0.58mm) and the longest (99.71±1.14mm). The ratio was 0.89±0.09mm. Anterior teeth dimensions were not statistically not different between males and females. Significant differences were observed between calculated ratios with GP and to each other's. (p=0). CONCLUSIONS: Either GP nor RP is applicable amongst the Tunisian Population.

Evaluation of Different Techniques of Working Length Determination in Comparison with CBCT.

AIM: To estimate the working length of teeth using conventional tactile technique, radiovisiography technique, Apex locator, and confirmation of working length by cone beam computed tomography technique. MATERIALS AND METHODS: Forty patients with the age group between 20 and 50 years with irreversible pulpitis were included in this study. After taking a preoperative radiograph, the procedure was started. The cavity wall buildup was done using composite in the cases needed and then rubber dam application was done. The working length of mesiobuccal and mesiolingual canal was taken using cone beam computed tomography and this was considered as the standard value. Then using tactile method, length of the canal was measured using radiovisiographic software followed by apexlocator. RESULT: The Apex locator has showed best result as compared to tactile and radiovisiography. CONCLUSION: Apex locator values were closest to cone beam computed tomography working length measurement values and electronic apexlocator can be used efficiently as an alternative method for working length determination. The quality of various techniques according to ranks of working length determination was found to be Cone beam computed tomography (CBCT) > Apexloc > Radiovisiography (RVG) > Tactile. Thus, Apex locator can be used as an alternative to cone beam computed tomography for working length determination.

An effective artificial testing model to reliability experiments for electronic apex locator devices used in endodontic practice.

Background and Aim: This experimental study aimed to investigate the reliability of using electronic apex locator devices to determine the working length of artificial root canals. Materials and Methods: The experiments were performed using resin endoblocks and mandibular canine teeth (n = 20/group). After the same working length of root canal samples was provided, the teeth and artificial root canals were embedded in an alginate mold. The measurements with Root ZX® and Propex Pixi® apex locators were performed and recorded. The data were analyzed using SPSS software (SPSS V23; IBM Corp., Armonk, New York, USA) and the variance was set at P < 0.05. Results: There was no significant difference between the groups; mean distance from the actual working length using different apex locators (P = 0.633, P = 0.474), and endpoint positioning distributions (P = 0.591). Conclusion: The results indicate that the artificial model could be a laboratory method of determining the accuracy of apex locators and efficient calibration of devices before their clinical use.

Estimating the size of unerupted teeth: Moyers vs deep learning.

INTRODUCTION: This study aimed to design a deep learning (DL) system for estimating the sum of the mesiodistal widths (MDWs) of unerupted mandibular canines and premolars in the mixed dentition period and to clarify its performance by comparing DL estimates with Moyers' table (MT) results. METHODS: The training dataset was obtained from 974 patients with permanent dentition. On the 3-dimensional digital models, MDWs of the mandibular right teeth were measured using Ortho Analyzer software (3Shape, Copenhagen, Denmark). A system was designed that could predict the total width of the mandibular canines and premolars using the mandibular central, lateral incisor, and first molar MDWs. This artificial neural system had 5 layers (4 hidden and 1 output) and 886 neurons. The MDWs of the mandibular teeth were introduced to the DL system in the form of datasets. The DL system's predicted results for 100 randomly selected patients were compared with the probability values obtained from the MT. RESULTS: The estimation performance of the DL system for the unerupted mandibular canines and premolars was acceptable, with 49.5% accuracy. The success rate for the MT, in comparison, was 45.0%, with an error margin of 1.00 mm. CONCLUSIONS: The DL system offers a potential alternative to current methods in estimating unerupted tooth size. The results of the DL system are expected to provide diagnostic support for mixed dentition analysis on dental casts.

Buccolingual and Mesiodistal Dimensions of the Permanent Teeth, Their Diagnostic Value for Sex Identification, and Bolton Indices.

INTRODUCTION: We aimed (1) to measure the mesiodistal and buccolingual widths of the permanent dentition in Iranian orthodontic patients, (2) to determine cut-off points for sex identification based on the mesiodistal and buccolingual diameters, and (3) to calculate Bolton indices. METHODS: The mesiodistal and buccolingual dimensions of 28 maxillary and mandibular permanent teeth in 331 Iranian nonsyndromic orthodontic patients (dental casts and radiographs) aged 12 to 35 years old with fully erupted permanent dentitions (except the third molars and some sporadic cases of a few teeth missing or excluded) were measured. The anterior, posterior, and overall Bolton ratios were calculated in cases with no missing teeth in the 6-to-6 range. Potentially associated factors (the skeletal Angle classes, crowding, sex, jaws, sides, and age), as well as the value of these measurements for sex determination and cut-off points for sex identification based on these measurements were assessed using receiver-operator characteristic (ROC) curves, analysis of variance (ANOVA), Tukey, unpaired t-test, partial and Pearson correlation coefficients, and multiple linear regression (α = 0.05). RESULTS: Sex dimorphism was very frequent (P ≤ 0.05 in 41 out of 56 measurements). Only the buccolingual widths of the maxillary lateral and the mandibular central and lateral differed across the Angle classes (ANOVA/Tukey, P < 0.05). Cut-off points were estimated for 38 dental measurements, which were proper for sex identification (P < 0.05), with 8 (2 maxillary and 6 mandibular) measurements being highly appropriate (having areas under ROC curves ≥ 64%, P < 0.05). Both the mandibular canines were the only teeth with all four measurements highly appropriate for this purpose. Controlling for the role of sex, aging was associated negatively with several crown dimensions (the buccolingual widths of the maxillary first and second premolar and mandibular second premolar and first molar; the mesiodistal diameters of the maxillary central, canine, first premolar, and first molar, mandibular central, lateral, first premolar, and first molar, P ≤ 0.05, partial correlation coefficient). There were significant correlations among crown sizes. All the 28 (right/left-averaged) measurements were smaller in microdontia cases (P ≤ 0.002). The anterior, posterior, and overall Bolton indices were 78.05, 105.42, and 91.87, respectively. There were correlations between the overall Bolton ratio with the other two Bolton ratios (Pearson R = 0.696, R = 0.740, P < 0.0005) but not between the anterior and posterior Bolton ratios (R = 0.045, P = 0.459). The skeletal Angle classes might not be associated with the overall and anterior Bolton ratios (ANOVA, regression, Pearson, P > 0.05). However, the posterior Bolton ratio was smaller in class II cases compared to classes I or III (Tukey, P ≤ 0.045). In the whole sample, there was no sex dimorphism in Bolton ratios (t-test, P > 0.05). However, in Angle class II patients, the anterior Bolton ratio was greater in men than in women (P = 0.014). CONCLUSIONS: Sex dimorphism might be very common in the dentition of Iranians, with aging significantly reducing some measurements. The buccolingual widths of some incisors might differ across the skeletal Angle classes. Mandibular canines are the most appropriate teeth for sex identification. The Angle classes might not be associated with the anterior and overall Bolton ratios; nevertheless, the posterior Bolton ratio might be smaller in class II cases compared to others. In general, sex might not affect Bolton ratios; however, in class II patients, the anterior Bolton ratios might be larger in men.

Crown heights in the permanent teeth of 47,XXY males and 47,XXX females.

OBJECTIVE: Earlier results based on dental casts and radiographs have shown that additional X and Y chromosomes influence permanent and deciduous tooth crown sizes, with 47,XYY males exhibiting greater crown heights than 46,XY males. We studied here the effect of both X and Y chromosomes on tooth crown heights. MATERIAL AND METHODS: The series consisted of 48 47,XXY males, 22 of their male relatives, and seven 47,XXX females with five female relatives. The population controls consisted of 27 males and 33 females. Measurements of all applicable teeth except for the third molars on both sides of the jaws were made on panoramic radiographs with a sliding digital calliper. RESULTS: Apart from a few teeth, the mean crown heights in the 47,XXY males were greater than those in the male population controls, the differences being statistically significant for one tooth in the maxilla and ten teeth in the mandible. With the exception of two teeth, the 47,XXX females had taller tooth crowns than the female population controls, the differences in the two teeth being statistically significant. The 47,XXY males had greater tooth crown heights than the 47,XXX females, except in one tooth, and the differences were significant in two teeth. The tooth crown heights of the male relatives of the 47,XXY males and the female relatives of the 47,XXX females were close to those in the general population. CONCLUSIONS: The present results demonstrated the effect of additional X and Y chromosomes in increasing crown heights. The differences between the 47,XXY males and 47,XXX females indicated a stronger effect of a Y chromosome on tooth crown height than of an X chromosome.