RESUMO
BACKGROUND: Arcae concha and Meretricis concha cyclinae concha are two marine shellfish herbs with similar composition and efficacy, which are usually calcined and used clinically. OBJECTIVE: This study investigated variations in the inorganic and organic components of Arcae concha and Meretricis concha cyclinae concha from different production regions, both Arcae concha and Meretricis concha cyclinae concha. The aim was to enhance the understanding of these two types of marine shell traditional Chinese medicine (msTCM) and provide a foundation for their future development and application. METHOD: Spectroscopic techniques, including infrared spectroscopy, X-ray spectroscopy, and X-ray fluorescence spectroscopy, were used to analyze the calcium carbonate (CaCO3) crystal and trace elements. Thermogravimetric analysis was used to investigate the decomposition process during heating. The proteins were quantified using the BCA protein assay kit. Principal component analysis (PCA) was used to classify inorganic elements in the two marine shellfish traditional Chinese medicines. RESULTS: No significant differences were found among the various production regions. The crystal structure of CaCO3 in the raw products was aragonite, but it transformed into calcite after calcination. The contents of Ca, Na, Sr, and other inorganic elements were highest. The protein content was significantly reduced after calcination. Therefore, these factors cannot accurately reflect the internal quality of TCM, rendering qualitative identification challenging. CaCO3 dissolution in the decoction of Arcae concha and Meretricis concha cyclinae concha increased after calcination, aligning with the clinical application of calcined shell TCM. PCA revealed the inorganic elements in them, indicating that the variation in trace element composition among different drugs leads to differences in their therapeutic focus, which should be considered during usage. CONCLUSIONS: This study clarifies the composition and structure changes of corrugated and clam shell before and after calcining, and it lays the foundation for the comprehensive utilization of marine traditional Chinese medicine. HIGHLIGHTS: These technical representations reveal the differences between raw materials and processed products, which will provide support for the quality control of other shellfish TCM.
Assuntos
Carbonato de Cálcio , Medicina Tradicional Chinesa , Animais , Carbonato de Cálcio/química , Carbonato de Cálcio/análise , Arcidae/química , Exoesqueleto/química , Análise de Componente Principal , Frutos do Mar/análise , Oligoelementos/análise , Oligoelementos/químicaRESUMO
BACKGROUND: This study investigated the geographical origin classification of green coffee beans from continental to country and regional levels. An innovative approach combined stable isotope and trace element analyses with non-linear machine learning data analysis to improve coffee origin classification and marker selection. Specialty green coffee beans sourced from three continents, eight countries, and 22 regions were analyzed by measuring five isotope ratios (δ13 C, δ15 N, δ18 O, δ2 H, and δ34 S) and 41 trace elements. Partial least squares discriminant analysis (PLS-DA) was applied to the integrated dataset for origin classification. RESULTS: Origins were predicted well at the country level and showed promise at the regional level, with discriminating marker selection at all levels. However, PLS-DA predicted origin poorly at the continental and Central American regional levels. Non-linear machine learning techniques improved predictions and enabled the identification of a higher number of origin markers, and those that were identified were more relevant. The best predictive accuracy was found using ensemble decision trees, random forest and extreme gradient boost, with accuracies of up to 0.94 and 0.89 for continental and Central American regional models, respectively. CONCLUSION: The potential for advanced machine learning models to improve origin classification and the identification of relevant origin markers was demonstrated. The decision-tree-based models were superior with their embedded variable identification features and visual interpretation. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
Assuntos
Aprendizado de Máquina , Isótopos/química , Oligoelementos/química , Dinâmica não Linear , Café/químicaRESUMO
Innovative engineering design for biologically active hydroxyapatites requires enhancing both mechanical and physical properties, along with biocompatibility, by doping with appropriate chemical elements. Herein, the purpose of this investigation was to evaluate and elucidate the model of naturally occurring hydroxyapatite and the effects of doped trace elements on the function of normal human fibroblasts, representing the main cells of connective tissues. The substrates applied (geological apatites with hexagonal prismatic crystal habit originated from Slyudyanka, Lake Baikal, Russia (GAp) and from Imilchil, The Atlas Mountains, Morocco (YAp)) were prepared from mineral natural apatite with a chemical composition consistent with the building blocks of enamel and enriched with a significant F- content. Materials in the form of powders, extracts and single-crystal plates have been investigated. Moreover, the effects on the function of fibroblasts cultured on the analyzed surfaces in the form of changes in metabolic activity, proliferation and cell morphology were evaluated. Apatite plates were also evaluated for cytotoxicity and immune cell activation capacity. The results suggest that a moderate amount of F- has a positive effect on cell proliferation, whereas an inhibitory effect was attributed to the Cl- concentration. It was found that for (100) GAp plate, fibroblast proliferation was significantly increased, whereas for (001) YAp plate, it was significantly reduced, with no cytotoxic effect and no immune response from macrophages exposed to these materials. The study of the interaction of fibroblasts with apatite crystal surfaces provides a characterization relevant to medical applications and may contribute to the design of biomaterials suitable for medical applications and the evaluation of their bioavailability.
Assuntos
Apatitas/química , Durapatita/química , Fibroblastos , Minerais/química , Oligoelementos/química , Materiais Biocompatíveis/química , Proliferação de Células , Sobrevivência Celular , Fenômenos Químicos , Fibroblastos/citologia , Fibroblastos/metabolismo , Humanos , Análise EspectralRESUMO
Nickel serves critical roles in the metabolism of E. coli and many prokaryotes. Many details of nickel trafficking are unestablished, but a nonproteinaceous low-molecular-mass (LMM) labile nickel pool (LNiP) is thought to be involved. The portion of the cell lysate that flowed through a 3 kDa cutoff membrane, which ought to contain this pool, was analyzed by size-exclusion and hydrophilic interaction chromatographies (SEC and HILIC) with detection by inductively coupled plasma (ICP) and electrospray ionization (ESI) mass spectrometries. Flow-through-solutions (FTSs) contained 11-15 µM Ni, which represented most Ni in the cell. Chromatograms exhibited 4 major Ni-detected peaks. MS analysis of FTS and prepared nickel complex standards established that these peaks arose from Ni(II) coordinated to oxidized glutathione, histidine, aspartate, and ATP. Surprisingly, Ni complexes with reduced glutathione or citrate were not members of the LNiP under the conditions examined. Aqueous Ni(II) ions were absent in the FTS. Detected complexes were stable in chelator-free buffer but were disrupted by treatment with 1,10-phenanthroline or citrate. Titrating FTS with additional NiSO4 suggested that the total nickel-binding capacity of cytosol is approximately 20-45 µM. Members of the LNiP are probably in rapid equilibrium. Previously reported binding constants to various metalloregulators may have overestimated the relevant binding strength in the cell because aqueous metal salts were used in those determinations. The LNiP may serve as both a Ni reservoir and buffer, allowing cells to accommodate a range of Ni concentrations. The composition of the LNiP may change with cellular metabolism and nutrient status.
Assuntos
Escherichia coli/química , Escherichia coli/metabolismo , Níquel/química , Níquel/metabolismo , Glutationa/química , Dissulfeto de Glutationa/química , Dissulfeto de Glutationa/metabolismo , Modelos Moleculares , Estrutura Molecular , Oligoelementos/química , Oligoelementos/metabolismoRESUMO
The organic wine market is rapidly growing worldwide, both in terms of production and consumption. However, the scientific literature is not conclusive regarding differences in the elemental composition of wines according to their production method, including both major and trace elements. Minerals can be present in wine as a result of both anthropogenic and environmental factors. To date, this has not been evaluated in volcanic contexts, neither has the emergent issue of rare earths and other minority elements as potential sources of food contamination. This study using inductively coupled plasma mass spectrometry (ICP-MS) analyses organic and conventional wines produced in the Canary Islands (Spain), an archipelago of volcanic origin, to compare their content of 49 elements, including rare earths and minority elements. Our results showed that organic wines presented lower potential toxic element content on average than their conventional counterparts, but differences were not significant. Geographical origin of the wine samples (island) was the only significant variable differentiating wine samples by their composition profiles. By comparing our data with the literature, no agreement was found in terms of differences between organic and conventionally-produced wines. This confirms that other factors prevail over elemental composition when considering differences between wine production methods. Regarding the toxicological profile of the wines, five samples (three organic and two conventional) exceeded the maximum limits established by international legislation. This highlights the need for stricter analytical monitoring in the Canary Islands, with a particular focus on Cu and Ni concentration, and potentially in other volcanic areas.
Assuntos
Metais Terras Raras/isolamento & purificação , Oligoelementos/isolamento & purificação , Vitis/química , Vinho/análise , Contaminação de Alimentos/análise , Alimentos Orgânicos/análise , Geografia , Humanos , Espectrometria de Massas , Metais Terras Raras/química , Espanha , Oligoelementos/química , Erupções Vulcânicas/efeitos adversosRESUMO
INTRODUCTION: The degenerative process of the intervertebral disc is a heterogeneous process that may exist in two forms, and involves dominant degenerative changes within the nucleus pulposus and the annulus fibrosus. In degenerative disc disease, the oxidative stress factor can play an important role. OBJECTIVE: The aim of research was to present a new approach to understanding the role of the analyzed elements in the process of degeneration of the intervertebral disc. MATERIAL AND METHODS: Selected elements from oxidative groups (Fe, Zn, Mo, As, Se), associated with enzymatic processes (Fe, Mo, Se, Zn, Ag, As, Bi), metals (Fe, Zn, Mo, Li) and metalloids (As, Bi) and their content was analyzed depending on the changes in the radiological images of the intervertebral disc. Elemental content analysis was performed by Inductively Coupled Plasma Mass Spectrometry analytical technique. RESULTS: The similarity between Fe and Se has been demonstrated during different stages of the analysis of groups of patients with degenerative disc disease. There was a negative correlation between Li and degenerative disc disease. The results also suggest that Fe and Ag are involved in degenerative changes within the intervertebral disc. A potential relationship between As/Bi and Fe/Mo in the degeneration of the intervertebral disc was demonstrated. CONCLUSIONS: Only some of the correlations can be explained by the metabolism of morphological elements of the intervertebral disc. The relationships indicate new directions for further studies on the degeneration process of the intervertebral disc. The presented study may reflect metabolic changes in the intervertebral disc and adjacent structures in response to the progressive degenerative process.
Assuntos
Degeneração do Disco Intervertebral/metabolismo , Deslocamento do Disco Intervertebral/metabolismo , Metais/química , Estresse Oxidativo , Adulto , Idoso , Feminino , Humanos , Disco Intervertebral/diagnóstico por imagem , Disco Intervertebral/metabolismo , Degeneração do Disco Intervertebral/diagnóstico por imagem , Deslocamento do Disco Intervertebral/diagnóstico por imagem , Masculino , Espectrometria de Massas , Metais/metabolismo , Pessoa de Meia-Idade , Oligoelementos/química , Oligoelementos/metabolismo , Adulto JovemRESUMO
The Isotrace CNRS workgroup in collaboration with National Research Council of Canada has characterized a number of trace element mass fractions and isotope ratios currently not certified in AQUA-1 natural drinking water reference material (NRC Canada). This survey further expands the use of this material as a tool for environmental quality control, method validation, and method development tool for the international community. Simultaneously, the SLRS-6 river water was analyzed as quality control and also in order to compare both water characteristics, which were sampled in the same area but having undergone different treatment. Mass fractions for B, Cs, Li, Ga, Ge, Hf, Nb, P, Rb, Rh, Re, S, Sc, Se, Si, Sn, Th, Ti, Tl, W, Y, Zr, REEs, and six isotopic ratios are proposed for Sr and Pb. Measurements were mostly performed using ICP-MS with various calibration approaches. The results are reported as consensus or indicative values depending on the number of available datasets, with their associated uncertainties.
Assuntos
Água Potável/química , Oligoelementos/química , Água/química , Padrões de ReferênciaRESUMO
A method has been developed, optimised and validated to analyse protein powder supplements on an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS), with reference to ICH Guideline Q2 Validation of Analytical Procedures: Text and Methodology. This method was used in the assessment of twenty-one (n = 21) elements (Al, Au, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Li, Mg, Mn, Mo, Pb, Pt, Sn, Ti, Tl, V) to evaluate the safety of thirty-six (n = 36) protein powder samples that were commercially available in the Irish marketplace in 2016/2017. Using the determined concentrations of elements in samples (µg·kg-1), a human health risk assessment was carried out to evaluate the potential carcinogenic and other risks to consumers of these products. While the concentrations of potentially toxic elements were found to be at acceptable levels, the results suggest that excessive and prolonged use of some of these products may place consumers at a slightly elevated risk for developing cancer or other negative health impacts throughout their lifetimes. Thus, the excessive use of these products is to be cautioned, and consumers are encouraged to follow manufacturer serving recommendations.
Assuntos
Espectrometria de Massas/métodos , Pós/química , Proteínas/química , Análise Espectral/métodos , Humanos , Irlanda , Metais , Medição de Risco , Oligoelementos/químicaRESUMO
Commercial production of therapeutic proteins using mammalian cells requires complex process solutions, and consistency of these process solutions is critical to maintaining product titer and quality between batches. Inconsistencies between process solutions prepared at bench and commercial scale may be due to differences in mixing time, temperature, and pH which can lead to precipitation and subsequent removal via filtration of critical solution components such as trace metals. Pourbaix diagrams provide a useful tool to model the solubility of trace metals and were applied to troubleshoot the scale-up of nutrient feed preparation after inconsistencies in product titer were observed between bench- and manufacturing-scale batches. Pourbaix diagrams modeled the solubility of key metals in solution at various stages of the nutrient feed preparation and identified copper precipitation as the likely root cause of inconsistent medium stability at commercial scale. Copper precipitation increased proportionally with temperature in bench-scale preparations of nutrient feed and temperature was identified as the root cause of copper precipitation at the commercial scale. Additionally, cell culture copper titration studies performed in bench-scale bioreactors linked copper-deficient mammalian cell culture to inconsistent titers at the commercial scale. Pourbaix diagrams can predict when trace metals are at risk of precipitating and can be used to mitigate risk during the scale-up of complex medium preparations.
Assuntos
Anticorpos Monoclonais/biossíntese , Técnicas de Cultura Celular por Lotes , Reatores Biológicos , Meios de Cultura/química , Oligoelementos/química , Animais , Células CHO , CricetulusRESUMO
The international seafood trade is based on food safety, quality, sustainability, and traceability. Mussels are bio-accumulative sessile organisms that need regular control to guarantee their safe consumption. However, no well-established and validated methods exist to trace mussel origin, even if several attempts have been made over the years. Recently, an inorganic multi-elemental fingerprint coupled to multivariate statistics has increasingly been applied in food quality control. The mussel shell can be an excellent reservoir of foreign inorganic chemical species, allowing recording long-term environmental changes. The present work investigates the multi-elemental composition of mussel shells, including Al, Cu, Cr, Zn, Mn, Cd, Co, U, Ba, Ni, Pb, Mg, Sr, and Ca, determined by inductively-coupled plasma mass-spectrometry in Mytilus galloprovincialis collected along the Central Adriatic Coast (Marche Region, Italy) at 25 different sampling sites (18 farms and 7 natural banks) located in seven areas. The experimental data, coupled with chemometric approaches (principal components analysis and linear discriminant analysis), were used to create a statistical model able to discriminate samples as a function of their production site. The LDA model is suitable for achieving a correct assignment of >90% of individuals sampled to their respective harvesting locations and for being applied to counteract fraud.
Assuntos
Exoesqueleto/química , Compostos Inorgânicos/análise , Mytilus/química , Oligoelementos/análise , Animais , Monitoramento Ambiental , Geografia , Compostos Inorgânicos/química , Sensibilidade e Especificidade , Oligoelementos/químicaRESUMO
Mesenchymal stem cells (MSCs) are of great interest for their use in cell-based therapies due to their multipotent differentiation and immunomodulatory capacities. In consequence of limited numbers following their isolation from the donor tissue, MSCs require extensive expansion performed in traditional 2D cell culture setups to reach adequate amounts for therapeutic use. However, prolonged culture of MSCs in vitro has been shown to decrease their differentiation potential and alter their immunomodulatory properties. For that reason, preservation of these physiological characteristics of MSCs throughout their in vitro culture is essential for improving the efficiency of therapeutic and in vitro modeling applications. With this objective in mind, many studies already investigated certain parameters for enhancing current standard MSC culture protocols with regard to the effects of specific culture media components or culture conditions. Although there is a lot of diversity in the final therapeutic uses of the cells, the primary stage of standard isolation and expansion is imperative. Therefore, we want to review on approaches for optimizing standard MSC culture protocols during this essential primary step of in vitro expansion. The reviewed studies investigate and suggest improvements focused on culture media components (amino acids, ascorbic acid, glucose level, growth factors, lipids, platelet lysate, trace elements, serum, and xenogeneic components) as well as culture conditions and processes (hypoxia, cell seeding, and dissociation during passaging), in order to preserve the MSC phenotype and functionality during the primary phase of in vitro culture.
Assuntos
Técnicas de Cultura de Células , Separação Celular/métodos , Meios de Cultura Livres de Soro/farmacologia , Células-Tronco Mesenquimais/efeitos dos fármacos , Aminoácidos/química , Diferenciação Celular/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Terapia Baseada em Transplante de Células e Tecidos/métodos , Células Cultivadas , Meios de Cultura Livres de Soro/química , Humanos , Imunomodulação , Peptídeos e Proteínas de Sinalização Intercelular/química , Lipídeos/química , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/imunologia , Oligoelementos/químicaRESUMO
The measurement and analysis of fifty-two elements by quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS) and direct mercury analysis were applied to origin discrimination of Italian traditional cuttlefish (Chioggia, Venice lagoon) from Mediterranean and Atlantic samples. A total 68 specimens were analyzed in triplicates to generate 204 mass spectra profiles which were statistically processed by different chemometric techniques. Loading weights from principal component analysis as input for linear discriminant analysis (LW-LDA), stepwise-LDA (S-LDA) and variable influence of projection-partial least square discriminant analysis (VIP-PLS-DA) were used to classify samples while retaining the lowest possible number of key variables. VIP-PLS-DA was found to be the best variable selection-discriminant tool combo since the selected Na-Co-B-K-Cd-V-U-Rb-Ni-Ba-Cu-As-Sr-Mn-Mo-Li-Ca-Mg-Se-Bi-Cs-P-Y elemental pattern allowed the samples to be classified with 100% sensitivity, specificity and accuracy.
Assuntos
Decapodiformes/química , Espectrometria de Massas/métodos , Oligoelementos/análise , Animais , Decapodiformes/metabolismo , Análise Discriminante , Análise dos Mínimos Quadrados , Região do Mediterrâneo , Mercúrio/análise , Micro-Ondas , Análise de Componente Principal , Oligoelementos/químicaRESUMO
Seventy-three samples of alcoholic beverages and juices that were purchased on the Polish market and home-made were analyzed for their elemental profiles. The levels of 23 metals were determined by ICP-MS (Ag, Ba, Bi, Cd, Co, Cr, Li, Mn, Ni, Pb, Sr and Tl), ICP-OES (Al, B, Ca, Cu, Fe, K, Mg, Na, Ti and Zn) and CVAAS (Hg) techniques in twenty-five samples of ciders widely available on the Polish market; six samples of home-made ciders; two samples of juices used in the production of these ciders; and forty samples of low-percentage, flavored alcoholic beverages based on beer. The gathered analytical data confirmed that the final elemental fingerprint of a product is affected by the elemental fingerprint of the ingredients used (apple variety) as well as the technology and equipment used by the producer, and in the case of commercial ciders, also the impact of type of the packaging used was proven. These factors are specific to each producer and the influence of the mentioned above parameters was revealed as a result of the performed analysis. Additionally, the inclusion of the home-made ciders in the data set helped us to understand the potential origin of some elements, from the raw materials to the final products. The applied statistical tests revealed (Kruskal-Wallis and ANOVA) the existence of statistically significant differences in the concentration of the following metals: Ag, Al, B, Bi, Co, Cr, Cu, Fe, K, Li, Mg, Na, Ni, Ti and Zn in terms of the type of cider origin (commercial and home-made). In turn, for different packaging (can or bottle) within one brand of commercial cider, the existence of statistically significant differences for Cu, Mn and Na was proved. The concentrations of all determined elements in the commercial cider from the Polish market and home-made cider samples can be considered as nontoxic, because the measured levels of elements indicated in the regulations were lower than the allowable limits. Moreover, the obtained results can be treated as preliminary for the potential authentication of products in order to distinguish the home-made (fake) from the authentic products, especially for premium-class alcoholic beverages.
Assuntos
Bebidas Alcoólicas/análise , Malus/química , Metais/isolamento & purificação , Oligoelementos/isolamento & purificação , Humanos , Íons/química , Íons/isolamento & purificação , Espectrometria de Massas , Metais/química , Polônia , Análise Espectral , Oligoelementos/químicaRESUMO
An on-line preconcentration system for the simultaneous determination of Copper (Cu) and manganese (Mn) in water samples was developed and coupled to a microwave-induced plasma optical emission spectrometer (MIP OES). The flow injection system was designed with a minicolumn packed with sisal fiber (Agave sisalana). A multivariate experimental design was performed to evaluate the influence of pH, preconcentration time, and eluent concentration. Optimal conditions for sample preparation were pH 5.5, preconcentration time was 90 s, and HCl 0.5 mol L-1 was the eluent. The main figures of merit were detection limits 3.7 and 9.0 µg L-1 for Cu and Mn, respectively. Precision was expressed as a relative standard deviation better than 10%. Accuracy was evaluated via spiked recovery assays with recoveries between 75-125%. The enrichment factor was 30 for both analytes. These results were adequate for water samples analysis for monitoring purposes. The preconcentration system was coupled and synchronized with the MIP OES nebulizer to allow simultaneous determination of Cu and Mn as a novel sample introduction strategy. The sampling rate was 20 samples/h. Sisal fiber resulted an economical biosorbent for trace element preconcentration without extra derivatization steps and with an awfully time of use without replacement complying with the principles of green analytical methods.
Assuntos
Cobre/química , Química Verde/métodos , Manganês/química , Água/química , Concentração de Íons de Hidrogênio , Indicadores e Reagentes/química , Micro-Ondas , Plasma/química , Oligoelementos/químicaRESUMO
A high concentration of potentially toxic elements (PTEs) can be frequently observed in the plastic processing sludge (PPS), thereby restricting its environmental applications. The main objective of this study was to investigate the effects of the co-pyrolysis of PPS and KH2PO4 (0, 5, 10 and 20 wt%) on the characteristics and environmental risks associated with the PTEs in PPS and derived chars. General characteristic analysis revealed that the char yield, ash content, pH, and particle size of the chars prepared with KH2PO4 were greater than those of the char prepared without KH2PO4 by 3.13-4.89 wt%, 2.95-4.4 wt%, 0.77-0.93, and 9.64-30.07 µm, respectively. The results of sequential extraction indicated that co-pyrolysis with KH2PO4 could considerably increase the distribution of PTEs in the F4 fraction (non-bioavailable) in PPS by 1.30-65.90% when compared with that obtained via co-pyrolysis with 5 wt% of KH2PO4. The toxic leaching tests indicated that the leaching concentrations of Cr, Ni, Cu, Zn, Cd, and Pb in the char prepared without KH2PO4 decreased to different extents when PPS was subjected to co-pyrolysis with KH2PO4, especially in case of co-pyrolysis with 5 wt% of KH2PO4. The range of decrease was 26.40-88.34%. However, in case of Cu, Zn, and Pb, the leaching concentration of the chars prepared with more than 10 wt% of KH2PO4 increased owing to the decomposition of (Cu Zn)PbVO4(OH) in an acidic environment. The results obtained using Hakanson's equations revealed that the potential ecological risk associated with the PTEs in chars obtained by co-pyrolysis with KH2PO4 decreased, with a minimum decrease of 38.17%. In addition, the risk level associated with PPS reduced from considerable to low after co-pyrolysis with KH2PO4. The observations of this study imply that the co-pyrolysis of PPS with KH2PO4 can be a promising treatment for PTE immobilization.
Assuntos
Metais Pesados/química , Fosfatos/química , Plásticos/química , Compostos de Potássio/química , Pirólise , Eliminação de Resíduos , Oligoelementos/química , Esgotos/químicaRESUMO
Coconut water (Cocos Nucifera) is shown to be a source of essential elements present in the form of low-molecular weight stable complexes known for their bio-availability. The total element concentrations were in the range of 0.2-2.7, 0.3-1, 3-14 and 0.5-2 ppm for Fe, Cu, Mn, and Zn, respectively, and varied as a function of the origin of the nut and its maturity. Speciation was investigated by size-exclusion chromatography - inductively coupled plasma mass spectrometry (ICPMS), and hydrophilic interaction liquid chromatography (HILIC) - electrospray-OrbitrapMS. The metal species identified included: iron complexes with citrate and malate: FeIII(Cit)3(Mal), FeIII(Cit)2(Mal)2, FeIII(Mal)2, glutamine: FeIII(Glu)2 and nicotianamine: FeII(NA); copper complexes with phenylanine: CuII(Phe)2 and CuII(Phe)3 and nicotianamine: CuII(NA); zinc complexes with citrate: ZnII(Cit)2 and nicotianamine ZnII(NA) and manganese complex with asparagine MnII(Asp)2. The contributions of the individual species to the total elements concentrations could be estimated by HILIC - ICP MS.
Assuntos
Cocos/química , Sucos de Frutas e Vegetais/análise , Metais/análise , Oligoelementos/análise , Oligoelementos/química , Ácido Azetidinocarboxílico/análogos & derivados , Ácido Azetidinocarboxílico/análise , Ácido Azetidinocarboxílico/química , Cromatografia em Gel , Cromatografia Líquida , Ácido Cítrico/análise , Ácido Cítrico/química , Análise de Alimentos/métodos , Malatos/análise , Malatos/química , Metais/química , Peso Molecular , Espectrometria de Massas por Ionização por ElectrosprayRESUMO
Humic substances with or without chemical modification can serve as environmentally benign and inexpensive adsorbents of potentially toxic trace elements (PTTEs) in the environment. The present study investigated the absorption of Pb, Zn, Cu and Ni by natural and potassium persulfate (K2S2O8) modified humic acids (HAs) isolated from a lowland peat through batch experiments. The adsorption of the studied PTTEs on the natural HA was satisfactorily described by the Langmuir isotherm model with maximum monolayer adsorption capacities of 318.2, 286.5, 225.0 and 136.8 mmol/kg for Pb, Cu, Zn and Ni, respectively. A thorough characterization of the natural and modified HA using 13C nuclear magnetic resonance spectroscopy demonstrated that the chemical modification of natural HA with K2S2O8 led to an increase in the content of carboxyl groups, and ketone and quinoid fragments in the HA structure. Consequently, the modified HA absorbed 16.3, 14.2, 10.6 and 6.9% more Pb, Ni, Zn and Cu, respectively, than the original natural HA. The isotherm data modeling together with adsorbent characterization suggested that the adsorption of PTTEs was controlled mainly by chemisorption mechanisms where inner-sphere complexations of metal ions with HA functional groups took place.
Assuntos
Poluentes Ambientais/química , Recuperação e Remediação Ambiental/métodos , Substâncias Húmicas , Oligoelementos/química , Adsorção , Substâncias Húmicas/análise , Modelos Teóricos , Compostos de Potássio/química , Solo/química , Sulfatos/químicaRESUMO
We report on new biomaterials with promising bone and cartilage regeneration potential, from sustainable, cheap resources of fish origin. Thin films were fabricated from fish bone-derived bi-phasic calcium phosphate targets via pulsed laser deposition with a KrF * excimer laser source (λ = 248 nm, τFWHM ≤ 25 ns). Targets and deposited nanostructures were characterized by SEM and XRD, as well as by Energy Dispersive X-ray (EDX) and FTIR spectroscopy. Films were next assessed in vitro by dedicated cytocompatibility and antimicrobial assays. Films were Ca-deficient and contained a significant fraction of ß-tricalcium phosphate apart from hydroxyapatite, which could contribute to an increased solubility and an improved biocompatibility for bone regeneration applications. The deposited structures were biocompatible as confirmed by the lack of cytotoxicity on human gingival fibroblast cells, making them promising for fast osseointegration implants. Pulsed laser deposition (PLD) coatings inhibited the microbial adhesion and/or the subsequent biofilm development. A persistent protection against bacterial colonization (Escherichia coli) was demonstrated for at least 72 h, probably due to the release of the native trace elements (i.e., Na, Mg, Si, and/or S) from fish bones. Progress is therefore expected in the realm of multifunctional thin film biomaterials, combining antimicrobial, anti-inflammatory, and regenerative properties for advanced implant coatings and nosocomial infections prevention applications.
Assuntos
Osso e Ossos/química , Fosfatos de Cálcio/química , Materiais Revestidos Biocompatíveis/química , Peixes/metabolismo , Animais , Anti-Infecciosos/química , Anti-Infecciosos/farmacologia , Biofilmes , Regeneração Óssea/efeitos dos fármacos , Fosfatos de Cálcio/farmacologia , Linhagem Celular , Infecção Hospitalar/prevenção & controle , Escherichia coli/efeitos dos fármacos , Escherichia coli/crescimento & desenvolvimento , Humanos , Lasers , Teste de Materiais , Próteses e Implantes , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Oligoelementos/químicaRESUMO
Three species of adult hard tick (Ixodidae) were examined with scanning electron microscopy-energy dispersive X-ray spectroscopy to obtain elemental profiles of their exoskeletons and determine the presence of trace elements. The scutum, tarsal claws, chelicerae, and hypostome were examined on females and males of Amblyomma americanum, Dermacentor variabilis, and Ixodes scapularis. The only trace elements present included chlorine, calcium, and sodium. Chlorine was the most abundant trace element and occurred in all examined regions. The chelicerae generally possessed the highest weight percentages of Cl (up to 11.32 ± 1.36%) across all 3 species, although high weight percentages of Cl (up to 8.78 ± 2.77%) were also present in the hypostome teeth of most specimens. All 3 trace elements were present in the hypostome of A. americanum and I. scapularis, but Ca and Na appear to be absent from the teeth of D. variabilis. In general, there were few differences in the elemental profiles of the exoskeletons between the sexes of any species. This study confirms the presence of alkali metals (Na) and alkaline earth metals (Ca) in adult ticks, which are also common in other arachnids; however, the absence of transition metals such as zinc from the exoskeletons of ticks is uncommon and only shared with species of Ricinulei and Opiliones.
Assuntos
Ixodidae/química , Oligoelementos/análise , Exoesqueleto/química , Exoesqueleto/ultraestrutura , Animais , Cálcio/análise , Cloro/análise , Feminino , Ixodidae/anatomia & histologia , Ixodidae/ultraestrutura , Masculino , Massachusetts , Microscopia Eletrônica de Varredura , Missouri , New Hampshire , Sódio/análise , Espectrometria por Raios X , Oligoelementos/químicaRESUMO
Very little is known about how the elemental composition (ionome) of an insect cuticle varies as a result of different colouration. Using inductively-coupled plasma optical emission spectrometry (ICP-OES), we established ionomic profiles in microsamples of two adjacent regions of an insect cuticle with a contrasting colour pattern, namely, the black and orange regions of the elytra of the aposematic burying beetle Nicrophorus vespillo. The analysis revealed 53 elements (ranging in atomic weight from Na to Bi) occurring above the detection limit. The frequency of detectability of individual elements varied strongly, and only ten elements (Ba, Cu, Fe, K, Mg, Mn, P, Rb, Sb and Zn) were present in concentrations exceeding the detection limit in all the samples. The sum of concentrations of all elements in the orange regions of the elytra was 9% lower than in the black ones. The opposite distribution was displayed by the rare earth elements (REEs), the sum of which was 17% lower in the black elytral regions than in the orange ones. The concentrations of six elements were significantly higher in the black than in the orange regions: Al (by 97%), Cu (41%), Mn (14%), Na (46%), Se (97%) and W (47%). The concentrations of essential elements measured in both the black and orange regions exhibited very considerable variance: Ca (σ2 = 1834; 1882, respectively), K (145; 82) P (97; 76), Na (84; 53), Mg (24; 26) and Ba (9; 13). This, in part, could be attributed to individual differences, e.g. those resulting from the consumption of animal carcasses of different quality/chemical composition, but interference between elements and the consequent lowering of measurement quality are also possible. We highlight the fact that deeper insight into the basic relationship between insect colouration and variation in elemental composition requires micro-sampling of the homogeneous layers of an exoskeleton.