Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Evaluating the influence of palate scanning on the accuracy of complete-arch digital impressions-An in vitro study.

OBJECTIVES: To assess the impact of including the palate and the number of images recorded during intraoral digital scanning procedure on the accuracy of complete arch scans. METHODS: An experienced operator conducted 40 digital scans of a 3D printed maxillary model and divided them into two groups: 20 with inclusion of the palate (PAL) and 20 without (NPAL). Each set of scans was performed using an intraoral scanner (IOS) (Trios 5; 3Shape A/S; Copenhagen, Denmark). The resulting STL files were imported into the Geomagic Control X software (3D Systems, Rock Hill, SC, USA) for accuracy comparison. A reference STL file was created using a 3Shape E3 laboratory scanner (3Shape Scanlt Dental 2.2.1.0; Copenhagen, Denmark). The number of images captured was recorded during the scanning procedure. RESULTS: In the case of the right side no statistically significant difference in trueness was detected (84 µm ± 45.6 for PAL and 80.4 ± 40.4 µm for NPAL). In the case of the left side no significant difference in trueness was observed (215.1 ± 70.2 µm for PAL and 233.9 ± 70.7 µm for NPAL). In the case of the arch distortion a statistically significant difference in trueness was seen between the two types of scans (135.3 ± 71.9 µm for PAL and 380.4 ± 255.1 µm for NPAL). The average number of images was 831.25, and 593.8 for PAL and NPAL, respectively. CONCLUSIONS: Scanning of the palatal area can significantly improve the accuracy of dental scans in cases of complete arches. In terms of the number of images, based on the current results, obvious conclusions could not be drawn, and further investigation is required. CLINICAL SIGNIFICANCE: Scanning the palate may be beneficial for improving the accuracy of intraoral scans in dentate patients. Consequently, this should be linked to an appropriate scanning strategy that predicts palatal scanning.

Ultrasonic mapping of midpalatal suture - An ex-vivo study.

OBJECTIVE: Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency. METHODS: An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT. RESULTS: The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively. CONCLUSIONS: It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound. CLINICAL SIGNIFICANCE: This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

Retinoic Acid Upregulates METTL14 Expression and the m6A Modification Level to Inhibit the Proliferation of Embryonic Palate Mesenchymal Cells in Cleft Palate Mice.

Cleft palate only (CPO) is one of the most common craniofacial birth defects. Environmental factors can induce cleft palate by affecting epigenetic modifications such as DNA methylation, histone acetylation, and non-coding RNA. However, there are few reports focusing on the RNA modifications. In this study, all-trans retinoic acid (atRA) was used to simulate environmental factors to induce a C57BL/6J fetal mouse cleft palate model. Techniques such as dot blotting and immunofluorescence were used to find the changes in m6A modification when cleft palate occurs. RNA-seq and KEGG analysis were used to screen for significantly differentially expressed pathways downstream. Primary mouse embryonic palate mesenchymal (MEPM) cells were successfully isolated and used for in vitro experimental verification. We found that an increased m6A methylation level was correlated with suppressed cell proliferation in the palatine process mesenchyme of cleft palate mice. This change is due to the abnormally high expression of m6A methyltransferase METTL14. When using siRNAs and the m6A methyltransferase complex inhibitor SAH to interfere with the expression or function of METTL14, the teratogenic effect of atRA on primary cells was partially alleviated. In conclusion, METTL14 regulates palatal mesenchymal cell proliferation and cycle-related protein expression relies on m6A methylation modification, affecting the occurrence of cleft palate.

Spatiotemporal Evolution of Developing Palate in Mice.

The intricate formation of the palate involves a series of complex events, yet its mechanistic basis remains uncertain. To explore major cell populations in the palate and their roles during development, we constructed a spatiotemporal transcription landscape of palatal cells. Palate samples from C57BL/6 J mice at embryonic days 12.5 (E12.5), 14.5 (E14.5), and 16.5 (E16.5) underwent single-cell RNA sequencing (scRNA-seq) to identify distinct cell subsets. In addition, spatial enhanced resolution omics-sequencing (stereo-seq) was used to characterize the spatial distribution of these subsets. Integrating scRNA-seq and stereo-seq with CellTrek annotated mesenchymal and epithelial cellular components of the palate during development. Furthermore, cellular communication networks between these cell subpopulations were analyzed to discover intercellular signaling during palate development. From the analysis of the middle palate, both mesenchymal and epithelial populations were spatially segregated into 3 domains. The middle palate mesenchymal subpopulations were associated with tooth formation, ossification, and tissue remodeling, with initial state cell populations located proximal to the dental lamina. The nasal epithelium of the palatal shelf exhibited richer humoral immune responses than the oral side. Specific enrichment of Tgfß3 and Pthlh signals in the midline epithelial seam at E14.5 suggested a role in epithelial-mesenchymal transition. In summary, this study provides high-resolution transcriptomic information, contributing to a deeper mechanistic understanding of palate biology and pathophysiology.

Biomechanical behavior of three maxillary expanders in cleft lip and palate: a finite element study.

This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 µÎµ. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

Ultrasonographic analysis of palatal donor site healing accelerated with platelet-rich fibrin following subepithelial connective tissue harvesting.

OBJECTIVE: Platelet-rich fibrin (PRF) contains a variety of growth factors and bioactive molecules that play crucial roles in wound healing and angiogenesis. We aimed to evaluate the effects of PRF on tissue thickness and vascularization of the palatal donor site by ultrasound (USG) following subepithelial connective tissue harvesting. METHODOLOGY: A subepithelial connective tissue graft was harvested from the palatal region with a single incision for root coverage in 20 systemically healthy patients. In the test group (n = 10), the PRF membrane was placed at the donor site, whereas no material was applied in the control group (n=10). Palatal tissue thickness (PTT) and pulsatility index (PI) were evaluated by USG at baseline and on the 3rd, 7th, 14th, 30th, and 90th days after surgery. The early healing index (EHI) was used to evaluate donor site healing for 30 days. RESULTS: PTT was significantly higher in the PRF group on the 3rd and 14th days after surgery when compared to the controls. In the PRF-treated group, PI levels were significantly higher than in the controls, especially on the 14th day. PTT increased significantly 90 days after surgery compared to the test group baseline, but controls showed a significant decrease. The PRF group showed statistically significant improvements in EHI scores compared to controls on days 3, 7, and 14. This study found a negative correlation between PI values and EHI scores on postoperative days three and seven in the test group. CONCLUSION: USG is a non-invasive, objective method to radiographically evaluate the regenerative effects of PRF on palatal wound healing after soft tissue harvesting. To overcome graft inadequacy in reharvesting procedures, PRF application may enhance clinical success and reduce possible complications by increasing tissue thickness and revascularization in the donor area.

Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents.

OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

Influence of alveolar bone thickness and bucco-palatal inclination on root resorption of lateral incisors in unilateral maxillary impacted canines: a retrospective observational study.

BACKGROUND: This study aimed to investigate the potential associations between alveolar bone thickness, bucco-palatal inclination of maxillary lateral incisors, and lateral incisor root resorption in patients with unilateral maxillary impacted canines (UMICs). METHODS: A total of three hundred and five subjects (120 males, 185 females; mean age, 16.39 years; standard deviation, 4.04) with UMICs were included. Canine position and root resorption were assessed using CBCT. UMICs were divided into palatal, buccal and mid-alveolus groups (PICs, BICs and MAICs), with 117, 137 and 51 subjects, respectively. Alveolar bone thickness and bucco-palatal inclination of lateral incisors were measured using the Dolphin software. RESULTS: The prevalence of lateral incisor root resorption was significantly lower in the BICs (13.9%) than MAICs (29.4%) and PICs (29.1%). Alveolar bone thickness of the apical area was smaller in UMICs with lateral incisor root resorption than no resorption in both PICs (8.33 ± 1.64 vs 10.53 ± 2.55 mm) and BICs (8.94 ± 1.85 vs 10.76 ± 2.28 mm). Furthermore, lateral incisors on the impacted side were more buccally inclined in PICs with lateral incisor root resorption than no resorption, while in both BICs and MAICs, there was no statistical difference between lateral incisor root resorption than no resorption. Moreover, alveolar bone thickness of the apical area, rather than bucco-palatal inclination of lateral incisors, was significantly correlated with lateral incisor root resorption both in PICs and BICs. CONCLUSIONS: Lateral incisor root resorption is less common in BICs. Thinner alveolar bone thickness at the apical area of lateral incisors can be considered as a potential risk factor for lateral incisor root resorption in UMICs.

Surgical Management of Pediatric Obstructive Sleep Apnea Beyond Adenotonsillectomy: The Nose, Nasopharynx, and Palate.

While adenotonsillectomy is the primary treatment of pediatric obstructive sleep apnea (OSA), persistent OSA after surgery is common and may be due to residual obstruction at the nose, nasopharynx, and/or palate. Comprehensive evaluation for persistent pediatric OSA ideally includes clinical examination (with or without awake nasal endosocpy) as well as drug-induced sleep endoscopy in order to accurately identify sources of residual obstruction. Depending on the site of obstruction, some of the surgical management options include submucous inferior turbinate resection, septoplasty, adenoidectomy, and expansion sphincter pharyngoplasty.

Measuring Maxillary Posterior Tooth Movement: A Model Assessment using Palatal and Dental Superimposition.

Since the introduction of Invisalign by Align Technology, Inc. in 1999, questions and debates have persisted regarding the precision of Invisalign (clear aligner) therapy, particularly when compared to the use of traditional fixed appliances. This becomes particularly significant in cases involving anteroposterior, vertical, and transverse corrections, where precise comparisons are of paramount importance. To address these inquiries, this study introduces a meticulously devised protocol, placing a primary emphasis on digitally superimposing the movement of maxillary posterior teeth to facilitate accurate analysis. The sample included 25 patients who had completed their first series of Invisalign (clear) aligners. Four maxillary digital models (pre-treatment, post-treatment, ClinCheck-initial, and final models) were digitally superimposed using the palate rugae and dentitions as stable references. A software combination was used for model superimposition and tooth segmentation. Transformation matrices then expressed the differences between the achieved and predicted tooth positions. Thresholds for clinically relevant differences were at ±0.25 mm for linear displacement and ±2° for rotation. Differences were assessed using Hotelling's T-squared tests with Bonferroni correction. The mean differences in rotation (2.036° ± 4.217°) and torque (-2.913° ± 3.263°) were significant statistically and clinically, with p-values of 0.023 and 0.0003 respectively. De-rotation of premolars and torque control for all posterior teeth were less predictable. All mean differences for the linear measurements were statistically and clinically insignificant, except that the first molars seemed slightly (0.256 mm) more intruded than their predicted position. The clear aligner system appears to meet its prediction for most translational tooth movements and mesial-distal tipping in maxillary posterior teeth for non-extraction cases with mild to moderate malocclusions.

Assessing the fate and contribution of Foxd1-expressing embryonic precursors and their progeny in palatal development, homeostasis and excisional repair.

Oral mucosal tissues heal rapidly with minimal scarring, although palatal mucosa can be associated with excessive fibrosis in response to injury. Investigations on the balance between neovascularization and tissue repair suggests regulation of angiogenesis is an important determinant of repair versus scarring. Associated with pericyte mediated fibrosis in kidney injury, FoxD1 is implicated in growth centres during cranio-facial development, although which cell lineages are derived from these embryonic populations in development and in adult animals is unknown. Using a lineage tracing approach, we assessed the fate of embryonic Foxd1-expressing progenitor cells and their progeny in palatal development and during wound healing in adult mice. During palatal development as well as in post-natal tissues, Foxd1-lineage progeny were associated with the vasculature and the epineurium. Post-injury, de novo expression of FoxD1 was not detectable, although Foxd1-lineage progeny expanded while exhibiting low association with the fibroblast/myofibroblast markers PDGFα, PDGFß, vimentin, α-smooth muscle actin, as well as the neuronal associated markers S100ß and p75NTR. Foxd1-lineage progeny were primarily associated with CD146, CD31, and to a lesser extent CD105, remaining in close proximity to developing neovascular structures. Our findings demonstrate that FoxD1 derived cells are predominantly associated with the palatal vasculature and provide strong evidence that FoxD1 derived cells do not give rise to populations involved directly in the scarring of the palate.

Dentoskeletal effects of mini-screw assisted, non-surgical palatal expansion in adults using a modified force-controlled polycyclic protocol: a single-centre retrospective study.

OBJECTIVES: This study assessed the dental and skeletal effects of pure bone-borne, non-surgical maxillary expansion, using a modified force-controlled polycyclic protocol. METHODS: Records of 17 adult patients, mean age 24.1 years; range 18-39 years, who had undergone maxillary expansion using a bone-borne Quad-expander (with 4 mini-screws), were analysed. In all patients, 0.17 mm/day of expansion was completed for 1 week, followed by a cyclic protocol of expansion of forward and backward turns until the force needed to turn the expander was below 400 cN, assessed weekly. After this, expansion continued at a rate of 0.17 mm/day until the desired amount of expansion was achieved. Cone beam computer tomography scans were taken pre- and post-expansion. RESULTS: The mid-palatal suture was successfully opened in 100% of patients included in this study. Axially, the amount of skeletal opening at the posterior nasal spine was 61% of the anterior nasal spine. Expansion was pyramidal in the coronal plane. Significant increases at the dental and skeletal levels were achieved, with changes at the skeletal level reaching 73%. The alveolar bone angle increased more than the angular changes at the molars and premolars. LIMITATIONS: This is a retrospective study with short-term results. CONCLUSION: The Quad-expander, with a force-controlled polycyclic expansion protocol, effectively produced a significant increase in maxillary width in skeletally mature subjects in the short term.

Clinical comparative study on the accuracy of palatal rugae in models obtained by different impression materials and intraoral scanning.

OBJECTIVE: Palatal rugae are frequently used in the evaluation of tooth movement after treatment in orthodontics and as a stable region in superimposition. It is important to note that the impression method and material used to record the rugae region affect the accuracy of the impression. The aim of this study is to compare the accuracy of palatal rugae, in three-dimensional (3D) by employing both conventional and digital impression methods. MATERIALS AND METHODS: In this study, 22 patients (12 females, 10 males) mean age of 13.5 ± 1.7 years old were selected with complete permanent dentition. Three different impressions were taken from the maxillae of the patients: conventional impression using silicone rubber impression material, conventional impression using alginate impression material, and optical impression using an intraoral scanner. The impressions' digital data were analyzed by the GOM Inspect (Version 2018, Braunschweig, Germany), a 3D analysis software. The Root Mean Square (RMS) values of the total ruga region were evaluated in this software. The data were statistically analyzed using the Jamovi program. The Kruskal-Wallis test and Mann-Whitney U test were performed due to the non-normal distribution of the data. RESULTS: There is no statistically significant difference between the comparison points of the right and left rugae's medial and lateral points and total rugae regions' RMS values. Although there was no statistically significant difference, the total RMS values of alginate and digital scan measurements showed closer results than the RMS values of silicone and digital scan measurements. CONCLUSION: The study found that there was no statistically significant difference in the total RMS values of the ruga region between traditional and digital impression methods. CLINICAL RELEVANCE: The treatment period in orthodontics is long. Different impression materials and methods can be used for diagnostic, mid-treatment, and final impressions. For superimpositions and treatment and post-treatment palatal ruga evaluations, traditional and digital impression methods are clinically acceptable and can be used as alternatives to each other.

Clinical behavior of recurrent pleomorphic adenoma in the palate: a systematic review.

PURPOSE: This systematic review analyzed the clinical behavior and odds of malignancy of the palatal recurrent pleomorphic adenomas. METHODS: Systematic review of patients with recurrent pleomorphic adenoma arising in the palate. Database search: MEDLINE, Scopus, Web of Science, Cochrane, EMBASE, Virtual Health Library, Google Scholar, and OpenGrey. A binomial logistic regression was performed to assess the odds of detecting recurrence five, 10 and 20 years after the treatment of primary tumor. RESULTS: Thirteen studies (n = 18 patients) out of 336 were included. The recurrent pleomorphic adenoma in palate was more common in females (61.6%), average age was 49 years old (range 9-73 years old). Four patients progressed to malignant transformation. The odds ratio (OR) of detecting a recurrence at 10 (OR = 5.57; 95% confidence interval - 95%CI 1.13-27.52), and 20 years (OR = 18.78; 95%CI 3.18-110.84) after treatment of primary pleomorphic adenoma was significantly higher than at one-year follow-up. CONCLUSIONS: The recurrence of pleomorphic adenoma in palate remains a rare event of late occurrence. It mainly affects middle-aged female and carries a risk of malignant transformation. Although uncommon, patients with palatal pleomorphic adenoma should be warned about the possibility of recurrence or malignant transformation of tumor at advanced ages.

Unconventional use of Invisalign® in the treatment of ectopic palatal maxillary canines.

BACKGROUND: The proper development of the dental arches, including the eruption and correct positioning of the canines in the arch, is essential for the oral health of growing patients. Impacted canines not only give rise to functional challenges but also pose esthetic issues for patients. The aim of this article is to show if it is possible to benefit from the exclusive use of transparent aligners to guide the eruption of ectopic upper canines into the arch in the correct position. CASE REPORT: The subject of the study is the clinical case of a 13-year-old female growing patient who presented displaced upper permanent canines located in the palatal ectopic site. Following the surgical extraction of the retained deciduous elements, treatment with aligners for repositioning the ectopic canines in the arch was performed in two phases. At the end of the treatment, a Class I canine was achieved with satisfactory repositioning of the upper canines in the arch. CONCLUSION: The use of transparent aligners makes it possible, with some procedural precautions and in carefully selected cases, to reposition the ectopic palatal canines in the dental arch using a treatment that is both esthetic and effective.

Anterolateral advancement pharyngoplasty versus barbed reposition pharyngoplasty in patients with obstructive sleep apnea.

OBJECTIVES: To compare functional outcomes and complication rates of anterolateral advancement pharyngoplasty (ALA) versus barbed reposition pharyngoplasty (BRP) in the treatment of obstructive sleep apnea patients with palatal and lateral pharyngeal wall collapse. STUDY DESIGN: Prospective study. SETTING: University hospitals. SUBJECTS AND METHODS: Forty-six patients were included in this study. Patients were divided into two groups randomly, group 1 (23 cases) underwent anterolateral advancement pharyngoplasty and group 2 (23 cases) underwent barbed relocation pharyngoplasty. According to the following criteria: both sex, age between 18 and 65 years, body mass index ≤ 32 kg/m2, Friedman stage II or III, type I Fujita, nocturnal polysomnography study diagnostic for OSA, retropalatal and lateral pharyngeal wall collapse, diagnosis with flexible nasoendoscopy during a Muller's maneuver based on a 5-point scale and drug-induced sleep endoscopy. Patients who suffered from retroglossal airway collapse were rolled out. RESULTS: Apnea-hypopnea index decreased from 27.50 ± 11.56 to 11.22 ± 7.63 (P ≤ .001) in group 1 and from 33.18 ± 10.94 to 12.38 ± 6.77 (P ≤ .001) in group 2. Retropalatal posterior airway space increased from 9.84 ± 1.29 mm to 21.48 ± 2.8 mm (P ≤ .001) in group 1 and increased from 10.26 ± 1.2 mm to 22.86 ± 2.62 mm (P ≤ .001) in group 2. Retropalatal space volume increased from 1.9 ± 0.68 cm3 to 2.75 ± 0.7 cm3 (P ≤ .001) in group 1 and increased from 1.96 ± 0.88 cm3 to 2.82 ± 0.83 cm3 (P ≤ .001) in group 2. Surgical success was 86.95% in group 1 compared to 82.6% in group 2. CONCLUSIONS: Both techniques appear to be effective with a high surgical success rate in the treatment of OSA patients with retropalatal and lateral pharyngeal wall collapse.

Variability associated with maxillary infrazygomatic crest and palatal bone width, height, and angulation in subjects with different vertical facial growth types: a retrospective cone-beam computed tomography study.

OBJECTIVES: To assess the infrazygomatic crest (IZC) and palatal bone width, height, and angulation in patients with different vertical facial growth types as potential miniscrew insertion sites. MATERIALS AND METHODS: In this retrospective cone-beam computed tomography study, 162 subjects (81 males and 81 females, mean age 16.05 ± 0.65 years) were included. They were divided into three groups (hypodivergent, normodivergent, and hyperdivergent) based on the Frankfort mandibular plane angle. Ten buccal bone measurements were made at two different coronal sections: maxillary first molar mesiobuccal and distobuccal roots (bilaterally). Six palatal bone measurements were made on a sagittal section at the maxillary central incisors (bilaterally). A total of 32 measurements per subject were considered in the study. RESULTS: No significant difference was observed for the IZC (width and angle) at the maxillary first molar mesiobuccal root. A comparison of normodivergent and hyperdivergent groups for buccal width at the distobuccal root of the first molar showed significant differences. Palatal bone thickness at the level of 2 mm distal to the apex of the central incisor was significantly higher for the hyperdivergent group (10.43 mm) compared with the normodivergent (7.58 mm) and hypodivergent groups (7.83 mm). CONCLUSIONS: Hyperdivergent subjects tend to present a longer and deeper IZC and increased palatal bone thickness compared with other groups. The recommended insertion angle for the IZC mini-implant at 3 mm from the alveolar crest should be between 75.5° and 77°.

Involvement of microRNA-4680-3p against phenytoin-induced cell proliferation inhibition in human palate cells.

Cleft palate (CP) is one of the most common birth defects and is caused by a combination of genetic and/or environmental factors. Environmental factors such as pharmaceutical exposure in pregnant women are known to induce CP. Recently, microRNA (miRNA) was found to be affected by environmental factors. The aim of the present study was to investigate the involvement of miRNA against phenytoin (PHE)-induced inhibition of proliferation in human embryonic palatal mesenchymal (HEPM) cells. We demonstrated that PHE inhibited HEPM cell proliferation in a dose-dependent manner. We found that treatment with PHE downregulated cyclin-D1 and cyclin-E expressions in HEPM cells. Furthermore, PHE increased miR-4680-3p expression and decreased two downstream genes (ERBB2 and JADE1). Importantly, an miR-4680-3p-specific inhibitor restored HEPM cell proliferation and altered expression of ERBB2 and JADE1 in cells treated with PHE. These results suggest that PHE suppresses cell proliferation via modulation of miR-4680-3p expression.