Membrane-integral pyrophosphatase subfamily capable of translocating both Na+ and H+.

One of the strategies used by organisms to adapt to life under conditions of short energy supply is to use the by-product pyrophosphate to support cation gradients in membranes. Transport reactions are catalyzed by membrane-integral pyrophosphatases (PPases), which are classified into two homologous subfamilies: H(+)-transporting (found in prokaryotes, protists, and plants) and Na(+)-transporting (found in prokaryotes). Transport activities have been believed to require specific machinery for each ion, in accordance with the prevailing paradigm in membrane transport. However, experiments using a fluorescent pH probe and (22)Na(+) measurements in the current study revealed that five bacterial PPases expressed in Escherichia coli have the ability to simultaneously translocate H(+) and Na(+) into inverted membrane vesicles under physiological conditions. Consistent with data from phylogenetic analyses, our results support the existence of a third, dual-specificity bacterial Na(+),H(+)-PPase subfamily, which apparently evolved from Na(+)-PPases. Interestingly, genes for Na(+),H(+)-PPase have been found in the major microbes colonizing the human gastrointestinal tract. The Na(+),H(+)-PPases require Na(+) for hydrolytic and transport activities and are further activated by K(+). Based on ionophore effects, we conclude that the Na(+) and H(+) transport reactions are electrogenic and do not result from secondary antiport effects. Sequence comparisons further disclosed four Na(+),H(+)-PPase signature residues located outside the ion conductance channel identified earlier in PPases using X-ray crystallography. Our results collectively support the emerging paradigm that both Na(+) and H(+) can be transported via the same mechanism, with switching between Na(+) and H(+) specificities requiring only subtle changes in the transporter structure.

Molecular cloning and characterization of a vacuolar H+₋pyrophosphatase from Dunaliella viridis.

The halotolerant alga Dunaliella adapts to exceptionally high salinity and possesses efficient mechanisms for regulating intracellular Na(+). In plants, sequestration of Na(+) into the vacuole is driven by the electrochemical H(+) gradient generated by H(+) pumps, and this Na(+) sequestration is one mechanism that confers salt tolerance to plants. To investigate the role of vacuolar H(+) pumps in the salt tolerance of Dunaliella, we isolated the cDNA of the vacuolar proton-translocating inorganic pyrophosphatase (V-H(+)-PPase) from Dunaliella viridis. The DvVP cDNA is 2,984 bp in length, codes for a polypeptide of 762 amino acids and has 15 transmembrane domains. The DvVP protein is highly similar to V-H(+)-PPases from other green algae and higher plant species, in terms of its amino acid sequence and its transmembrane model. A phylogenetic analysis of V-H(+)-PPases revealed the close relationship of Dunaliella to green algal species of Charophyceae and land plants. The heterologous expression of DvVP in the yeast mutant G19 (Δena1-4) suppressed Na(+) hypersensitivity, and a GFP-fusion of DvVP localized to the vacuole membranes in yeast, indicating that DvVP encodes a functional V-H(+)-PPase. A northern blot analysis showed a decrease in the transcript abundance of DvVP at higher salinity in D. viridis cells, which is in contrast to the salt-induced upregulation of V-H(+)-PPase in some plants, suggesting that the expression of DvVP under salt stress may be regulated by different mechanisms in Dunaliella. This study not only enriched our knowledge about the biological functions of V-H(+)-PPases in different organisms but also improved our understanding of the molecular mechanism of salt tolerance in Dunaliella.

Comparative biochemical and functional studies of family I soluble inorganic pyrophosphatases from photosynthetic bacteria.

Soluble inorganic pyrophosphatases (inorganic diphosphatases, EC 3.6.1.1) were isolated and characterized from three phylogenetically diverse cyanobacteria--Synechocystis sp. PCC 6803, Anabaena sp. PCC 7120, and Pseudanabaena sp. PCC 6903--and one anoxygenic photosynthetic bacterium, Rhodopseudomonas viridis (purple nonsulfur). These enzymes were found to be family I soluble inorganic pyrophosphatases with c. 20 kDa subunits with diverse oligomeric structures. The corresponding ppa genes were cloned and functionally validated by heterologous expression. Cyanobacterial family I soluble inorganic pyrophosphatases were strictly Mg(2+)-dependent enzymes. However, diverse cation cofactor dependence was observed for enzymes from other groups of photosynthetic bacteria. Immunochemical studies with antibodies to cyanobacterial soluble inorganic pyrophosphatases showed crossreaction with orthologs of other main groups of phototrophic prokaryotes and suggested a close relationship with the enzyme of heliobacteria, the nearest photosynthetic relatives of cyanobacteria. A slow-growing Escherichia coli JP5 mutant strain, containing a very low level of soluble inorganic pyrophosphatase activity, was functionally complemented up to wild-type growth rates with ppa genes from diverse photosynthetic prokaryotes expressed under their own promoters. Overall, these results suggest that the bacterial family I soluble inorganic pyrophosphatases described here have retained functional similarities despite their genealogies and their adaptations to diverse metabolic scenarios.

Site-specific effects of zinc on the activity of family II pyrophosphatase.

Family II pyrophosphatases (PPases), recently found in bacteria and archaebacteria, are Mn(2+)-containing metalloenzymes with two metal-binding subsites (M1 and M2) in the active site. These PPases can use a number of other divalent metal ions as the cofactor but are inactive with Zn(2+), which is known to be a good cofactor for family I PPases. We report here that the Mg(2+)-bound form of the family II PPase from Streptococcus gordonii is nearly instantly activated by incubation with equimolar Zn(2+), but the activity thereafter decays on a time scale of minutes. The activation of the Mn(2+)-form by Zn(2+) was slower but persisted for hours, whereas activation was not observed with the Ca(2+)- and apo-forms. The bound Zn(2+) could be removed from PPase by prolonged EDTA treatment, with a complete recovery of activity. On the basis of the effect of Zn(2+) on PPase dimerization, the Zn(2+) binding constant appeared to be as low as 10(-12) M for S. gordonii PPase. Similar effects of Zn(2+) and EDTA were observed with the Mg(2+)- and apo-forms of Streptococcus mutans and Bacillus subtilis PPases. The effects of Zn(2+) on the apo- and Mg(2+)-forms of HQ97 and DE15 B. subtilis PPase variants (modified M2 subsite) but not of HQ9 variant (modified M1 subsite) were similar to that for the Mn(2+)-form of wild-type PPase. These findings can be explained by assuming that (a) the PPase tightly binds Mg(2+) and Mn(2+) at the M2 subsite; (b) the activation of the corresponding holoenzymes by Zn(2+) results from its binding to the M1 subsite; and (c) the subsequent inactivation of Mg(2+)-PPase results from Zn(2+) migration to the M2 subsite. The inability of Zn(2+) to activate apo-PPase suggests that Zn(2+) binds more tightly to M2 than to M1, allowing direct binding to M2. Zn(2+) is thus an efficient cofactor at subsite M1 but not at subsite M2.

Structural studies of metal ions in family II pyrophosphatases: the requirement for a Janus ion.

Family II inorganic pyrophosphatases (PPases) constitute a new evolutionary group of PPases, with a different fold and mechanism than the common family I enzyme; they are related to the "DHH" family of phosphoesterases. Biochemical studies have shown that Mn(2+) and Co(2+) preferentially activate family II PPases; Mg(2+) partially activates; and Zn(2+) can either activate or inhibit (Zyryanov et al., Biochemistry, 43, 14395-14402, accompanying paper in this issue). The three solved family II PPase structures did not explain the differences between the PPase families nor the metal ion differences described above. We therefore solved three new family II PPase structures: Bacillus subtilis PPase (Bs-PPase) dimer core bound to Mn(2+) at 1.3 A resolution, and, at 2.05 A resolution, metal-free Bs-PPase and Streptococcus gordonii (Sg-PPase) containing sulfate and Zn(2+). Comparison of the new and old structures of various family II PPases demonstrates why the family II enzyme prefers Mn(2+) or Co(2+), as an activator rather than Mg(2+). Both M1 and M2 undergo significant changes upon substrate binding, changing from five-coordinate to octahedral geometry. Mn(2+) and Co(2+), which readily adopt different coordination states and geometries, are thus favored. Combining our structures with biochemical data, we identified M2 as the high-affinity metal site. Zn(2+) activates in the M1 site, where octahedral geometry is not essential for catalysis, but inhibits in the M2 site, because it is unable to assume octahedral geometry but remains trigonal bipyramidal. Finally, we propose that Lys205-Gln81-Gln80 form a hydrophilic channel to speed product release from the active site.

Rates of elementary catalytic steps for different metal forms of the family II pyrophosphatase from Streptococcus gordonii.

Soluble inorganic pyrophosphatases (PPases) form two nonhomologous families, denoted I and II, that have similar active-site structures but different catalytic activities and metal cofactor specificities. Family II PPases, which are often found in pathogenic bacteria, are more active than family I PPases, and their best cofactor is Mn(2+) rather than Mg(2+), the preferred cofactor of family I PPases. Here, we present results of a detailed kinetic analysis of a family II PPase from Streptococcus gordonii (sgPPase), which was undertaken to elucidate the factors underlying the different properties of family I and II PPases. We measured rates of PP(i) hydrolysis, PP(i) synthesis, and P(i)/water oxygen exchange catalyzed by sgPPase with Mn(2+), Mg(2+), or Co(2+) in the high-affinity metal-binding site and Mg(2+) in the other sites, as well as the binding affinities for several active-site ligands (metal cofactors, fluoride, and P(i)). On the basis of these data, we deduced a minimal four-step kinetic scheme and evaluated microscopic rate constants for all eight relevant reaction steps. Comparison of these results with those obtained previously for the well-known family I PPase from Saccharomyces cerevisiae (Y-PPase) led to the following conclusions: (a) catalysis by sgPPase does not involve the enzyme-PP(i) complex isomerization known to occur in family I PPases; (b) the values of k(cat) for the magnesium forms of sgPPase and Y-PPase are similar because of similar rates of bound PP(i) hydrolysis and product release; (c) the marked acceleration of sgPPase catalysis in the presence of Mn(2+) and Co(2+) results from a combined effect of these ions on bound PP(i) hydrolysis and P(i) release; (d) sgPPase exhibits lower affinity for both PP(i) and P(i); and (e) sgPPase and Y-PPase exhibit similar values of k(cat)/K(m), which characterizes the PPase efficiency in vivo (i.e., at nonsaturating PP(i) concentrations).