A Near-Infrared-Triggered Dynamic Wrinkling Biointerface for Noninvasive Harvesting of Practical Cell Sheets.

Cell sheet engineering represents a new era of precise and efficient regenerative medicine, but its efficacy is limited by the elaborative preparation and the weak mechanics. Herein, a near-infrared (NIR)-triggered dynamic wrinkling biointerface was designed for rapid acquisition of practical cell sheets. The biocompatible NIR can initiate the photothermal-mechanical linkage cascade to efficiently dissolve the collagen supporting layer and release the high-quality cell sheets. The interfacial shear force generates with the dynamic wrinkling, playing an active role in accelerating the cell sheet release. High-quality and self-supporting cell sheets can be harvested within a few minutes, demonstrating a new paradigm of photothermal-mechanical manipulation. The transplantable cell sheets with outstanding physiological and mechanical performances were proven to promote wound healing in skin regeneration. This method may open a completely new front in thermal and mechanical responsive cascade to harvest cell sheets, facilitating their wide applications in regenerative medicine.

Shape-transformation of polymersomes from glassy and crosslinkable ABA triblock copolymers.

Recent developments in the field of polymer vesicles, i.e. polymersomes, have demonstrated that disrupting the equilibrium conditions of the milieu could lead to shape transformation into stable non-spherical morphologies, bringing on-demand shape control to reality and bearing great promise for cell mimicry and a variety of biomedical applications. Here, we studied the self-assembly behavior of glassy amphiphilic triblock copolymers, poly(ethylene glycol)-block-polystyrene-stat-poly(coumarin methacrylate)-block-poly(ethylene glycol) (PEG-b-P(S-stat-CMA)-b-PEG), and their response to various stimuli. By changing the respective molecular weights of both the hydrophobic P(S-stat-CMA) and the hydrophilic PEG blocks, we varied the hydrophobic volume fraction thereby accessing a range of morphologies from spherical and worm-like micelles, as well as polymersomes. For the latter, we observed that slow osmotic pressure changes induced by dialysis led to a decrease in size while rapid osmotic pressure changes by addition of a PEG fusogen led to morphological transformations into rod-like and tubular polymersomes. We also found out that chemically crosslinking the vesicles before inducing osmotic pressure changes led to the vesicles exhibiting hypotonic shock, atypical for glassy polymersomes. We believe that this approach combining the robustness of triblock copolymers and light-based transformations will help expand the toolbox to design ever more complex biomimetic constructs.

Effect of aging on adsorption behavior of polystyrene microplastics for pharmaceuticals: Adsorption mechanism and role of aging intermediates.

In the environment, aging obviously changes physicochemical properties of microplastics (MPs), but the effects of aging process on adsorption behavior of MPs are not fully understood. In this study, the aging of polystyrene (PS) was accelerated by photo-Fenton reaction. The adsorption mechanism of different aged PS toward atorvastatin (ATV) and amlodipine (AML) and the role of PS-derived intermediates in adsorption process were investigated. Results showed that the adsorption of pristine PS toward pharmaceuticals relied on hydrophobic and π-π interaction, while for aged PS, electrostatic interaction and hydrogen bonding controlled the adsorption. The study revealed that the intermediates released from aging process in high concentration (TOC of 10 mg/L) significantly decreased the adsorption of ATV (10 mg/L) on PS (5.0 g/L) but increased the adsorption of AML (10 mg/L). However, those intermediates at environmental concentration (0.1 mg/L) exhibited low effects on adsorption of pharmaceuticals (1.0 mg/L) on MPs (0.5 g/L of PS). The impact mainly depended on electrostatic interaction between MPs and aging intermediates. Besides, the adsorption of low-degree aged PS was more susceptible to the aging intermediates than that of high-degree aged ones. These findings highlight significant implication of MP-derived intermediates in aquatic environments.

Resistive Water Sensors Based on PEDOT:PSS-g-PEGME Copolymer and Laser Treatment for Water Ingress Monitoring Systems.

Water sensors are a type of level sensor that can be used in various applications requiring the sensing of water levels, such as in dams, nuclear power plants, water pipes, water tanks, and dehumidifiers. In particular, water sensors in water ingress monitoring systems (WIMS) protect lives and property from disasters caused by water leakage and flooding. Here, a resistive water sensor for WIMS that incorporates poly(3,4-ethylenedioxythinophene):poly(styrene sulfonate) (PEDOT:PSS) grafted with poly(ethylene glycol) methyl ether (PEGME) (PEDOT:PSS-g-PEGME copolymer) as high-conductivity electrodes and laser-treated PEDOT:PSS-g-PEGME copolymer as the low-conductivity resistive component is reported. The configuration of the water sensor is modeled as two parallel resistors (Rlaser treated PEDOT:PSS||Rwater) when water comes into contact with the sensor surface. The two-resistor configuration exhibits a better performance in comparison with single-resistor configurations comprising only PEDOT:PSS-g-PEGME copolymer or laser-treated PEDOT:PSS-g-PEMGE copolymer. Moreover, PEDOT:PSS-g-PEGME copolymer is applied to the sensor to improve the stability of PEDOT:PSS in water. We demonstrate that the sensor can detect the water level in real time with high sensitivity and accuracy, and thus has potential in applications for monitoring water-related hazards.

Feeder-free culture for mouse induced pluripotent stem cells by using UV/ozone surface-modified substrates.

Pluripotent stem cells (PSCs), especially induced PSCs (iPSCs), have great potential for regenerative medicine. Conventionally, PSCs are cultured and expanded efficiently on feeder cell layers or on cell-adhesive matrices. Large-scale iPSC expansion in an undifferentiated state without laborious culturing procedures and high manufacturing costs for the adhesive matrix is urgently required to integrate iPSCs into therapeutic applications. For this, feeder layers or cell-adhesive matrix coating have to be removed from the iPSC culture system. To enable feeder- and matrix coating-free culture conditions, we focused on a UV/ozone surface treatment technique for polystyrene cell culture substrates to improve PSC adhesion and proliferation. In this study, changes in the molecular structure of UV/ozone-modified polystyrene were characterized to optimize the surface chemistry for iPSC. Mouse iPSCs (miPSCs) were cultured on the UV/ozone-modified polystyrene substrates without feeder layers. As a result, large polymeric chains of polystyrene were dissociated into small polymeric chains and oxidized to form ester and carboxylic acid functional groups by the UV/ozone treatment. Moreover, it was suggested that optimal valance of these modified molecules enabled the feeder- and matrix coating-free culture of miPSC with maintaining pluripotency.

3D Semiconducting Polymer/Graphene Networks: Toward Sensitive Photocathodic Enzymatic Bioanalysis.

This work reports the development of three-dimensional (3D) semiconducting polymer/graphene (SP/G) networks toward sensitive photocathodic enzymatic bioanalysis. Specifically, the porous 3D graphene was first synthesized via the hydrothermal and freeze-dry processes and then mixed with semiconducting polymer to obtain the designed hierarchical structure with unique porosity and large surface area. Afterward, the as-prepared hybrid was immobilized onto the indium tin oxide (ITO) for further characterizations. Exemplified by sarcosine oxidase (SOx) as a model biocatalyst, an innovative 3D SP/G-based photocathodic bioanalysis capable of sensitive and specific sarcosine detection was achieved. The suppression of cathodic photocurrent was observed in the as-developed photocathodic enzymatic biosystem due to the competition of oxygen consumption between the enzyme-biocatalyst process and O2-dependent photocathodic electrode. This work not only presented a unique protocol for 3D SP/G-based photocathodic enzymatic bioanalysis but also provided a new horizon for the design, development, and utilization of numerous 3D platforms in the broad field of general photoelectrochemical (PEC) bioanalysis.

Sorption of organic compounds by aged polystyrene microplastic particles.

Microplastics that are released into the environment undergo aging and interact with other substances such as organic contaminants. Understanding the sorption interactions between aged microplastics and organic contaminants is therefore essential for evaluating the impact of microplastics on the environment. There is little information available on how the aging of microplastics affects their sorption behavior and other properties. We have therefore investigated the effects of an accelerated UV-aging procedure on polystyrene microplastics, which are used in products such as skin cleaners and foams. Physical and chemical particle characterizations showed that aging led to significant surface oxidation and minor localized microcrack formation. Sorption coefficients of organic compounds by polystyrene microplastics following aging were up to one order of magnitude lower than for pristine particles. Sorption isotherms were experimentally determined using a diverse set of probe sorbates covering a variety of substance classes allowing an in-depth evaluation of the poly-parameter linear free-energy relationship (ppLFER) modelling used to investigate the contribution of individual molecular interactions to overall sorption. The ppLFER modelling was validated using internal cross-validation, which confirmed its robustness. This approach therefore yields improved estimates of the interactions between aged polystyrene microplastics and organic contaminants.

Polymer Dots for Photoelectrochemical Bioanalysis.

Different from the most extensively used inorganic quantum dots (Qdots) for the current state-of-the-art photoelectrochemical (PEC) bioanalysis, this work reports the first demonstration of polymer dots (Pdots) for novel PEC bioanalysis. The semiconducting Pdots were prepared via the reprecipitation method and then immobilized onto the transparent indium tin oxide glass electrode for PEC biodetection of the model molecule l-cysteine. The experimental results revealed that the as-fabricated Pdots exhibited excellent and interesting PEC activity and good analytical performance of rapid response, high stability, wide linear range, and excellent selectivity. In particular, the PEC sensor could easily discriminate l-cysteine from reduced l-glutathione (l-GSH). This work manifested the great promise of Pdots in the field of PEC bioanalysis, and it is believed that our work could inspire the development of numerous functional Pdots with unique properties for innovative PEC bioanalytical purposes in the future.

Plasmon-Enhanced Photocleaving Dynamics in Colloidal MicroRNA-Functionalized Silver Nanoparticles Monitored with Second Harmonic Generation.

The photocleaving dynamics of colloidal microRNA-functionalized nanoparticles are studied using time-dependent second harmonic generation (SHG) measurements. Model drug-delivery systems composed of oligonucleotides attached to either silver nanoparticles or polystyrene nanoparticles using a nitrobenzyl photocleavable linker are prepared and characterized. The photoactivated controlled release is observed to be most efficient on resonance at 365 nm irradiation, with pseudo-first-order rate constants that are linearly proportional to irradiation powers. Additionally, silver nanoparticles show a 6-fold plasmon enhancement in photocleaving efficiency over corresponding polystyrene nanoparticle rates, while our previous measurements on gold nanoparticles show a 2-fold plasmon enhancement compared to polystyrene nanoparticles. Characterizations including extinction spectroscopy, electrophoretic mobility, and fluorimetry measurements confirm the analysis from the SHG results. The real-time SHG measurements are shown to be a highly sensitive method for investigating plasmon-enhanced photocleaving dynamics in model drug delivery systems.

Liquid polystyrene: a room-temperature photocurable soft lithography compatible pour-and-cure-type polystyrene.

Materials matter in microfluidics. Since the introduction of soft lithography as a prototyping technique and polydimethylsiloxane (PDMS) as material of choice the microfluidics community has settled with using this material almost exclusively. However, for many applications PDMS is not an ideal material given its limited solvent resistance and hydrophobicity which makes it especially disadvantageous for certain cell-based assays. For these applications polystyrene (PS) would be a better choice. PS has been used in biology research and analytics for decades and numerous protocols have been developed and optimized for it. However, PS has not found widespread use in microfluidics mainly because, being a thermoplastic material, it is typically structured using industrial polymer replication techniques. This makes PS unsuitable for prototyping. In this paper, we introduce a new structuring method for PS which is compatible with soft lithography prototyping. We develop a liquid PS prepolymer which we term as "Liquid Polystyrene" (liqPS). liqPS is a viscous free-flowing liquid which can be cured by visible light exposure using soft replication templates, e.g., made from PDMS. Using liqPS prototyping microfluidic systems in PS is as easy as prototyping microfluidic systems in PDMS. We demonstrate that cured liqPS is (chemically and physically) identical to commercial PS. Comparative studies on mouse fibroblasts L929 showed that liqPS cannot be distinguished from commercial PS in such experiments. Researchers can develop and optimize microfluidic structures using liqPS and soft lithography. Once the device is to be commercialized it can be manufactured using scalable industrial polymer replication techniques in PS--the material is the same in both cases. Therefore, liqPS effectively closes the gap between "microfluidic prototyping" and "industrial microfluidics" by providing a common material.

Transition from star-like to crew-cut micelles induced by UV radiation.

In the present article, the effect of UV on PS-b-PMMA micelles in solution is discussed. Micellar solutions of the amphiphilic poly(styrene-b-methylmethacrylate) block copolymer in selective solvent (methanol for the PMMA block) were exposed to UV radiation, which has simultaneously led to cross linking of the micellar core (PS) and degradation of the micellar corona (PMMA). The kinetics of such process were investigated in situ by means of dynamic light scattering, allowing the measurement of hydrodynamic radius as a function of UV exposure time. Results indicate that the size of micelles has decreased with UV exposure time down to a minimum value. Such reduced size resulted from PMMA degradation, which later promoted aggregation and coagulation because the micellar core was no longer well protected by PMMA. Addition of good solvent for both blocks (toluene) to non-UV exposed micelles has led to core swelling (PS) and, ultimately, system disassembly (free copolymer chain). The effect of adding toluene on the UV-exposed micelles has only caused core swelling as a consequence of the PS cross-linking.

Quantitative comparison of the autofluorescence of bacteria and polystyrene microspheres under violet wavelength excitation for verification of fluorescence-based bioaerosol detector results.

The autofluorescence intensity of bacteria and fungal spores was quantified by fluorescence microscopy in order to obtain the information for evaluating fluorescence-based bioaerosol detectors and was comparable to that of some types of polystyrene microspheres (PSMs). Although the intensity for microbes was distributed across a wide range over an order of magnitude in gray scale, it was in the intensity range of certain PSMs. Furthermore, some of those bacteria and PSMs were aerosolized in a test chamber and the fluorescence intensity was measured with a bioaerosol detector. Although there was a slight difference in the order of intensity from the results obtained by fluorescence microscopy, the fluorescence-based bioaerosol detector showed the intensity was in a comparable range.

First demonstration of laser engagement of 1-Hz-injected flying pellets and neutron generation.

Pellet injection and repetitive laser illumination are key technologies for realizing inertial fusion energy. Numerous studies have been conducted on target suppliers, injectors, and tracking systems for flying pellet engagement. Here we for the first time demonstrate the pellet injection, counter laser beams' engagement and neutron generation. Deuterated polystyrene (CD) bead pellets, after free-falling for a distance of 18 cm at 1 Hz, are successfully engaged by two counter laser beams from a diode-pumped, ultra-intense laser HAMA. The laser energy, pulse duration, wavelength, and the intensity are 0.63 J per beam, 104 fs, and 811 nm, 4.7 × 10(18) W/cm(2), respectively. The irradiated pellets produce D(d,n)(3)He-reacted neutrons with a maximum yield of 9.5 × 10(4)/4π sr/shot. Moreover, the laser is found out to bore a straight channel with 10 µm-diameter through the 1-mm-diameter beads. The results indicate potentially useful technologies and findings for the next step in realizing inertial fusion energy.

Versatile functional microstructured polystyrene-based platforms for protein patterning and recognition.

We report the preparation of different functional surface patterns based on the optimization of the photo-cross-linking/degradation kinetics of polystyrene (PS) upon exposure to UV-light. We employed a PS-b-PGA (polystyrene-block-poly(l-glutamic acid)) block copolymer that will, in addition to the surface pattern, provide functionality. By using short irradiation times, PS can be initially cross-linked, whereas an excess of the exposure time provokes the degradation of the material. As a result of the optimization of time of exposure, the use of an appropriate cover, or the incorporation of an appropriate amount of absorbing active species (photoinitiator), different tailor-made surface patterns can be obtained, from boxes to needles. Moreover, in addition to the surface pattern, we introduced changes on the chemical composition of the polystyrene using an amphiphilic block copolymer (for instance, we employ PS-b-PGA) that will provide functional surfaces with major advantages. In particular, the presence of carboxylic functional groups provides a unique opportunity to anchor, for instance polypeptide sequences. We describe the immobilization of polypeptide sequences in precise surface positions that allows the use of the surfaces for protein recognition purposes. The immobilization of the proteins evidence the success of the recognition and opens a new alternative for protein patterning on surfaces for many biotechnological and biomedical applications.

Surface enhanced Raman scattering substrate with metallic nanogap array fabricated by etching the assembled polystyrene spheres array.

A sensitive surface enhanced Raman scattering (SERS) substrate with metallic nanogap array (MNGA) is fabricated by etching of an assembled polystyrene (PS) spheres array, followed by the coating of a metal film. The substrate is reproducible in fabrication and sensitive due to the nanogap coupling resonance (NGCR) enhancement. The NGCR is analyzed with the finite difference time domain (FDTD) method, and the relationship between the gap parameter and the field enhancement is obtained. Experimental measurements of R6G on demonstrate that the enhancement factor (EF) of the MNGA SERS substrate is increased by more than two fold compared with the control sample.

Determining ultraviolet degradation of high-visibility warning clothing with photochromic indicators.

The main purpose of this study was to select an appropriate photochromic dye and to develop a series of photochromic indicators showing ultraviolet (UV) degradation of selected background materials made from different polymers. The photochemistry of a series of photochromic compounds of oxazine and diarylethenes in thin polystyrene films were studied with spectroscopic methods. This paper also discusses the design and results of tests of UV photochromic indicators for high-visibility clothing.

Dynamic swelling of tunable full-color block copolymer photonic gels via counterion exchange.

One-dimensionally periodic block copolymer photonic lamellar gels with full-color tunability as a result of a direct exchange of counteranions were fabricated via a two-step procedure comprising the self-assembly of a hydrophobic block-hydrophilic polyelectrolyte block copolymer, polystyrene-b-poly(2-vinyl pyridine) (PS-b-P2VP), followed by sequential quaternization of the P2VP layers in 1-bromoethane solution. Depending on the hydration characteristics of each counteranion, the selective swelling of the block copolymer lamellar structures leads to large tunability of the photonic stop band from blue to red wavelengths. More extensive quaternization of the P2VP block allows the photonic lamellar gels to swell more and red shift to longer wavelength. Here, we investigate the dynamic swelling behavior in the photonic gel films through time-resolved in situ measurement of UV-vis transmission. We model the swelling behavior using the transfer matrix method based on the experimentally observed reflectivity data with substitution of appropriate counterions. These tunable structural color materials may be attractive for numerous applications such as high-contrast displays without using a backlight, color filters, and optical mirrors for flexible lasing.

Spectroscopic imaging of photopotentials and photoinduced potential fluctuations in a bulk heterojunction solar cell film.

We present spatially resolved photovoltage spectra of a bulk heterojunction solar cell film composed of phase-separated poly(9,9'-dioctylfluorene-co-benzothiadiazole) (F8BT) and poly(9,9'-dioctylfluorene-co-bis-N,N'-(4-butylphenyl)-bis-N,N'-phenyl-1,4-phenylenediamine) (PFB) polymers prepared on ITO/PEDOT:PSS and aluminum substrates. Over both PFB- and F8BT-rich domains, the photopotential spectra were found to be proportional to a linear combination of the polymers' absorption spectra. Charge trapping in the film was studied using photopotential fluctuation spectroscopy, in which low-frequency photoinduced electrostatic potential fluctuations were measured by observing noise in the oscillation frequency of a nearby charged atomic force microscope cantilever. Over both F8BT- and PFB-rich regions, the magnitude, distance dependence, frequency dependence, and illumination wavelength dependence of the observed cantilever frequency noise are consistent with photopotential fluctuations arising from stochastic light-driven trapping and detrapping of charges in F8BT. Taken together, our findings suggest a microscopic mechanism by which intermixing of phases leads to charge trapping and thereby to suppressed open-circuit voltage and decreased efficiency in this prototypical bulk heterojunction solar cell film.

Experimental determination of dosimetry parameters for Sinko (125)I seed source using a modified polystyrene phantom.

Successful treatment for permanent implant brachytherapy is based on accurate measurement of dosimetry parameters for the seed sources. Literature describes the application of various types of phantom to determine the AAPM TG-43 dosimetry parameters for permanent implant seeds. Previously we created a new type of phantom used to measure the dosimetry parameters of a high dose-rate (192)Ir source. In this study, we modified the phantom to suit to a common type of (125)I seed source (Sinko BT-125-1). The dose-rate constant, radial dose function and anisotropy function of this source were measured in detail and compared with the published values of other similar in-design (125)I seed sources. The experimental results exhibit fairly small measurement uncertainties and good self-consistency. The modified phantom is demonstrated on the measurement of dosimetry parameters for the Sinko BT-125-1 (125)I seed, however, it could easily be used for similar measurements of other permanent implantation seed sources.

Polystyrene particles reveal pore substructure as they translocate.

In this article, we report resistive-pulse sensing experiments with cylindrical track-etched PET pores, which reveal that the diameters of these pores fluctuate along their length. The resistive pulses generated by polymer spheres passing through these pores have a repeatable pattern of large variations corresponding to these diameter changes. We show that this pattern of variations enables the unambiguous resolution of multiple particles simultaneously in the pore, that it can detect transient sticking of particles within the pore, and that it can confirm whether any individual particle completely translocates the pore. We demonstrate that nonionic surfactant has a significant impact on particle velocity, with the velocity decreasing by an order of magnitude for a similar increase in surfactant concentration. We also show that these pores can differentiate by particle size and charge, and we explore the influence of electrophoresis, electroosmosis, and pore size on particle motion. These results have practical importance for increasing the speed of resistive-pulse sensing, optimizing the detection of specific analytes, and identifying particle shapes.