A proof of concept on implant-supported bilateral cantilever bridges: The T-Bridge approach.

The concept of bilateral cantilevers on a single central implant (T-design) for three-unit implant-supported fixed dental prostheses (ISFDPs) has not been explored nor tested. This technical hypothesis aimed to explore the feasibility of such an approach as a cost-effective alternative to conventional treatments. Careful considerations regarding implant diameter, length, ideal position, occlusal scheme, and bone remodeling are essential to ensure adequate support, stability, and prevention of complications. In this proof of concept, we present a preliminary case with this novel design to replace missing posterior teeth in a patient with narrow bone conditions. In addition, a series of planned investigations and preliminary results, including preclinical studies, are presented to illustrate our concept and its potential clinical implications. Clinically, after two-year follow-up, healthy and stable peri-implant tissues around the ISFDP exemplarily demonstrated excellent stability, functionality, and comfort, which is supported by acceptable fracture resistance data in vitro, suggesting indeed the practical potential and suitability. Thus, we claim that such a treatment modality has the at least theoretical potential to revolutionize implant dentistry by providing innovative and cost-effective treatment options for patients with partial ISFDPs in very specific cases. Of course, further research and evaluations are necessary to validate the clinical implications of this innovative hypothesis. Implementing the 3-on-1 T-bridge approach in partial ISFDPs could offer a promising alternative to traditional methods. If proven successful, this technique may lead to significant advancements in clinical practice, providing a less invasive cost-effective treatment option.

Marginal fit of 3-unit implant-supported fixed partial dentures: Influence of pattern fabrication method and repeated porcelain firings.

BACKGROUND: Marginal fit significantly impacts the long-term success of dental restorations. Different pattern fabrication methods, including hand-waxing, milling, or 3D printing, may affect restorations accuracy. The effect of porcelain firing cycles on the marginal fit of metal-ceramic restorations remains controversial, with conflicting findings across studies. PURPOSE: The aim was to evaluate the potential effects of multiple porcelain firings (3, 5, 7 cycles) as well as pattern fabrication method (conventional hand-waxing, milling, and 3D printing) on the marginal adaptation of 3-unit implant-supported metal-ceramic fixed partial dentures. It was hypothesized that neither the wax pattern fabrication method nor repeated ceramic firings would significantly affect the marginal adaptation of metal-ceramic crowns. METHODS: In this in-vitro study, 30 Cobalt-Chromium alloy frameworks were fabricated based on pattern made through three techniques: conventional hand-waxing, CAD-CAM milling, and CAD-CAM 3D printing (n = 10 per group). Sixteen locations were marked on each abutment to measure the vertical marginal gap at four stages: before porcelain veneering and after 3, 5, and 7 firing cycles. The vertical marginal gap was measured using direct microscopic technique at ×80 magnification. Mean vertical marginal gap values were calculated and two-way ANOVA and Tukey's post hoc tests were used for inter-group comparisons (α = 0.05). RESULTS: The 3D printing group showed significantly lower (P<0.001) mean vertical marginal gaps (60-76 µm) compared to the milling (77-115 µm) and conventional hand-waxing (102-110 µm) groups. The milling group exhibited a significant vertical gap increase after 3 firing cycles (P<0.001); while the conventional (P = 0.429) and 3D printing groups (P = 0.501) showed no significant changes after 7 firing cycles. Notably, the vertical marginal gap in all groups remained below the clinically acceptable threshold of 120 µm. CONCLUSION: CAD-CAM 3D printing provided superior marginal fit compared to CAD-CAM milling and conventional hand-wax pattern fabrication methods. The impact of porcelain firing on the mean marginal gap was significant only in the milling group. All three fabrication techniques yielded clinically acceptable vertical marginal adaptation after repeated firings. Additive manufacturing holds promise to produce precise implant-supported prostheses.

Analysis of the Marginal Continuity in Different Designs of Monolithic Zirconia Inlay-Retained Fixed Dental Prostheses: An In Vitro Study.

PURPOSE: To evaluate the marginal integrity of three inlay-retained fixed dental prosthesis (IRFDP) designs fabricated using monolithic zirconia. MATERIALS AND METHODS: In total, 30 IRFDPs were fabricated using 4-YTZP monolithic zirconia and randomly divided into three groups according to the cavity design. Groups ID2 and ID1.5 received an inlay cavity preparation, which includes a proximal box and an occlusal extension with a depth of 2 mm or 1.5 mm, respectively. Group PB received a proximal box cavity preparation without an occlusal extension. The restorations were fabricated and cemented using a dual-cure resin cement (Panavia V5) and subjected to an equivalent of 5 years of aging. The specimens were evaluated under an SEM to measure marginal continuity before and after the aging process. RESULTS: During the whole 5-year aging process, no specimens showed signs of cracking, fracture, or loss of retention in any restorations. In the SEM analysis, most marginal defects observed in the restorations were areas of microgaps at the tooth/cement interface (TC) or zirconia/cement interface (ZC), resulting in loss of adaptation. There was a significant difference between the groups after the aging process at both the TC (F = 4.762, P < .05) and ZC (F = 6.975, P < .05), with Group ID2 presenting the best performance. There was a significant difference between TC and ZC in all groups (P < .05), with ZC presenting more gaps in all groups. CONCLUSIONS: Inlay cavity designs including a proximal box and an occlusal extension exhibited better marginal stability than a proximal box without occlusal extension.

Peri-implant Tissue Health and Bone Resorption in Implant- Supported Fixed Partial Rehabilitations.

PURPOSE: To evaluate peri-implant tissue health and bone resorption in patients with implant-supported fixed partial rehabilitations. In particular, possible correlations between plaque accumulation and bone loss, as well as other periimplant health parameters, were investigated. MATERIALS AND METHODS: A total of 44 patients rehabilitated with fixed implant-supported partial rehabilitations were included. The following parameters were recorded: spontaneous bleeding (SB), suppuration, bleeding on probing (BOP), plaque index (PI), and probing depth (PD). Periapical radiographs were taken to measure crestal bone loss (BL). A nonparametric test (Spearman rank coefficient; rs) was used to identify possible correlations between the clinical parameters recorded. RESULTS: A total of 121 implants were analyzed. Global PI and BOP were 49.58% and 20.25%, respectively. There were no cases of suppuration, and only 2 implants showed spontaneous bleeding. Mean BL was 1.53 mm (SD: 0.98). No implants showed peri-implantitis. There was a weak, statistically significant correlation between PI and BL (rs = 0.27, P [2-tailed] = .99) and between PI and the other peri-implant parameters (BOP: rs = 0.14, P = .14; PD: rs = 0.04, P = .65; SB: rs = -0.08, P = .34). A very weak correlation was also found between BL and BOP (rs = 0.1, P = .2) and between BL and PD (rs = 0.02, P = .7). Correlation was found between BL and age (rs = 0.13, P = .81) and between the other peri-implant parameters and age using dichotomization (> or < 65 years; PI: rs = -0.14, P = .11; PD: rs = -0.21, P = .01; BOP: rs = -0.21, P = .01; SB: rs = 0.05, P = .53). No statistically significant correlations were found between the clinical parameters evaluated and the sex or the dental arch treated (maxilla vs mandible). In contrast, the correlation between periodontal parameters and years elapsed since surgery (follow-up) was significant. CONCLUSIONS: The present research suggests that in implant-supported fixed partial rehabilitations, dental implants with greater plaque accumulation are more likely to present augmented probing depth, peri-implant inflammation, and bone loss, although the correlation is statistically very weak. Patient age and time of follow-up also significantly affected peri-implant health parameters.

A comparative in vitro analysis of various temporization materials with respect to pulp chamber temperature changes during polymerization.

AIM: (1) To compare the temperature rise in the pulp chamber with different resin materials used for making provisional fixed partial dentures in anterior and posterior region while using Polyvinylsiloxane impression materials as matrix. (2) To identify a superior provisionalization material based on the amount of heat dissipated suitable for anterior and posterior provisional fixed partial denture fabrication. SETTINGS AND DESIGN: Temporary crowns and bridges are integral to Fixed Prosthodontics. It has been observed that conventional fixed prosthesis temporisation materials release heat due to the exothermic polymerisation reaction. When such a provisional material is directly let to set on a vital tooth, the heat transfer causes irreversible changes in the pulp tissue depending of the degree of change. Hence, this study observes amount of heat generation in various materials during temporisation procedure, by simulating similar conditions. MATERIALS AND METHODS: Two Models were fabricated, one simulating missing lateral incisor (Model A) and another simulating missing first molar (Model B). Intact maxillary central incisors and canine for Model A and intact mandibular Second Premolar and Second Molar were selected to act as abutments. These abutment teeth were fitted with the tip of a K-type Thermocouple inside their pulp chambers and these were connected to a digital thermometer. Five temporisation materials were chosen for fabrication of temporary crowns through Direct technique. (1) polymethy methacrylate (Self Cure acrylic), (2) bisacryl composite (Protemp 4), (3) visible light cure urethane dimethacrylate (Revotec LC), (4) barium glass and fumed silica infused methacrylate (Dentsply Integrity) and (5)nano-hybrid composite (VOCO Structur 3). Ten observations were made for each provisional material on each model. During each observation, temperature rise was recorded at 30s interval from the time of application, through the peak and till a decrease in temperature is observed. Polyvinyl siloxane was used as matrix for all except light cure resin, where polypropylene sheet was used. STATISTICAL ANALYSIS USED: Anova test used for statistical. RESULTS: ANOVA test revealed that there was a significant difference in the temperature changes associated with the provisional restorative materials used. Among the five, polymethy methacrylate (self cure resin) showed the maximum rise in temperature, followed by bisacryl composite (Protemp 4), visible light cure urethane dimethacrylate (Revotec LC), barium glass and fumed silica infused methacrylate (Dentsply Integrity) and nano-hybrid composite (VOCO Structur 3). There was no comparable difference between Model A and B but an overall reduction of temperature rise was observed in model B. CONCLUSION: VOCO Structur 3 showed the least temperature rise in the pulp chamber, and overall temperature rise was less for model B which can be attributed to the residual dentin thickness.

Does the Build Orientation Parameter Affect the Fit of Fixed Partial Dentures Fabricated by Additive Manufacturing?

PURPOSE: This in vitro study evaluated the adaptation of cobalt-chromium (Co-Cr) fixed dental prostheses (FDPs) fabricated by selective laser melting (SLM) with different build angles. MATERIALS AND METHODS: Maxillary right first premolars and first molars from a typodont were prepared with 1-mm chamfer, 2-mm occlusal reduction, and total taper of 8 degrees to receive three-unit FDPs. After framework design, data were sent to a laser machine, and 30 specimens were fabricated from Co-Cr metal powder by SLM. Specimens were assigned to three groups (n = 10 per group) with different build angles of 0 (A0), 30 (A30), and 45 (A45) degrees. Marginal and internal fit were evaluated. Results were compared among build orientation groups and abutments. Data were analyzed using the Levene test, t test, and analysis of variance (α = .05). RESULTS: A statistical difference was found between different angle groups (P = .015). At the abutment level, a significant difference was found in the gap values between build orientation groups for the molars (P = .048). Group A0 reported the smallest mean discrepancy values, and group A45 the highest. Statistical differences were found between group A45 and groups A0 (P < .001) and A30 (P < .024). CONCLUSIONS: The fit of printed metal FDPs was affected by the build orientation but remained clinically acceptable.

Effect of connector height and retainer occlusal thickness on the fracture resistance of posterior 4-unit monolithic 5Y-TZP fixed partial dentures after thermomechanical aging.

STATEMENT OF PROBLEM: The connector height and retainer occlusal thickness of fixed partial dentures (FPDs) may affect restoration longevity. PURPOSE: The purpose of this in vitro study was to determine and compare the fracture resistance of 4-unit monolithic 5% yttria tetragonal zirconia polycrystal (5Y-TZP) FPDs made with different connector heights and retainer occlusal thicknesses after thermomechanical aging. MATERIAL AND METHODS: Forty test metal dies were duplicated from a master metal die containing 2 anatomic abutment preparations of the mandibular right first premolar and second molar for a 4-unit FPD. The dies were divided into 2 groups of 20 each for the fabrication of 4-unit FPDs, with 2-mm and 4-mm uniform connector heights at all 3 connectors, resulting in 6.3-mm2 and 12.6-mm2 connector areas. Each of these groups was further divided into 2 subgroups based on the occlusal thickness of the 2 retainers of 1 mm and 2 mm (n=10). Polyvinyl siloxane impressions of the test metal dies were made and poured in Type V dental stone. Laboratory scans were performed on all the stone dies, and 40 5Y-TZP FPDs (Ceramill Zolid FX) were designed and fabricated. Subsequently, all the FPDs were luted on to the metal dies with a self-adhesive resin cement. The FPDs were preloaded (400 000 mechanical cycles; 4000 thermocycles) using a mastication simulator and tested for axial compressive strength. Two-way analysis of variance (ANOVA) was used to examine the effect of connector and occlusal thicknesses on the fracture load (α=.05). The data were further assessed using the post hoc Tukey HSD multiple comparison test (α=.05). RESULTS: The mean fracture load values were between 737 N and 1563 N. Significant differences in the mean fracture load were found between the connector heights (601 N; P<.001) and occlusal thicknesses (225 N; P=.002), but the interaction of the 2 factors was not significant (P=.132) The Tukey post hoc analysis showed significant differences between the connector thicknesses groups (P<.01), but the occlusal thicknesses were found to be similar for the same connector height (P=.609) CONCLUSIONS: Connector height and occlusal retainer thickness influenced the fracture load of 4-unit monolithic 5Y-TZP FPDs after thermomechanical aging.

Restoration of Teeth with Severely Compromised Tooth Structure using Digital Planning Combined with Orthodontic Magnetic Extrusion-A Report of 2 Cases.

This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.

Comparative Accuracy of Intraoral and Extraoral Digital Workflows for Short Span Implant Supported Fixed Partial Denture Fabrication: An In Vitro Study.

BACKGROUND The advent of digital impressions using computer-aided design and manufacturing technology (CAD/CAM) has simplified and improved the fabrication of implant prostheses in dentistry. The conventional impression has several drawbacks, including tray selection, material type, impression technique, impression disinfection, and cast model storage. The inaccuracies caused by distortion and contraction of impression material can be minimized with digital impressions. This study aimed to compare digital dental impressions of 10 working casts made using the Pindex laser removable die system to fabricate parallel drill channels vs 10 working casts made using the Di-Lok plastic tray removable die system. MATERIAL AND METHODS An implant master die with 2 dental implant analogs was fabricated. Ten working casts using the Pindex laser removable die system with parallel drill channels and 10 working casts using the Di-Lok plastic tray removable die system were fabricated. The working casts were scanned using an extra-oral laboratory scanner and the implant master model was scanned with an intra-oral scanner. RESULTS The properties of the casts made using the 2 systems were evaluated and analyzed with ANOVA and post hoc Tukey test. The mean horizontal linear distances between A1B1 (P<0.021), A2B2 (P<0.018), C1D1 (P<0.026), C2D2 (P<0.03), B1C1 (P<0.01), and mean vertical distances between B1A2 (P<0.015), C1D2 (P<0.001), B1B2 (P<0.028), and C1C2 (P<0.001) were significantly different between the Pindex system and Di-Lok tray system as compared to intra-oral scans. CONCLUSIONS Complete digital workflow with intra-oral scans were more than the partial digital workflow with extra-oral scans for the Pindex system and Di-Lok tray systems.

Fracture strength of 3-units fixed partial dentures fabricated with metal-ceramic, graphene doped PMMA and PMMA before and after ageing: An in-vitro study.

OBJECTIVES: To evaluate the fracture strength and linear elongation at break of three-units fixed partial dentures (FPDs) fabricated with traditional and new materials for fixed prosthodontics before and after ageing. METHODS: Sixty models of three-units FPDs were fabricated and cemented onto a Co-Cr model simulating the replacement of a maxillary second premolar. The samples were randomly divided into 3 groups: metal-ceramic (MCR), graphene-doped polymethylmethacrylate (PMMA-GR) and polymethylmethacrylate (PMMA). Half of the samples were directly subjected to fracture test, while the remaining half underwent an ageing process and then a fracture loading test using an electrodynamic testing machine. Fracture load and elongation at break values were taken and statistically analysed. RESULTS: Significant differences were detected between the different materials (p<0.05). All groups showed a reduction of the fracture load and elongation at break values after ageing, but not statistically significant, except for PMMA group (p = 2.012e-19) (p = 3.8e-11). CONCLUSIONS: MCR and PMMA-GR three-units FPDs showed higher fracture strength and lower elongation at break compared to PMMA. MCR and PMMA-GR had higher resistance to ageing processes compared to PMMA. CLINICAL SIGNIFICANCE: PMMA-GR could be considered a material for long-term provisional restorations as its mechanical behaviour and ageing resistance are more like MCR than PMMA.

Survival time analysis of remaining teeth following replacement of unilateral free-end missing teeth: A comparison between fixed implant-supported prostheses and removable partial dentures.

OBJECTIVES: This retrospective study aimed to investigate the differences in tooth loss rate between fixed implant-supported prostheses (FISPs) and removable partial dentures (RPDs) in cases of unilateral free-end missing teeth. MATERIALS AND METHODS: The data of 324 patients who underwent treatment with FISPs or RPDs for unilateral free-end missing teeth and satisfied the applicable criteria, were evaluated (47 in the FISPs group and 277 in the RPDs group). After propensity score (PS) matching, which was used to extract patients with similar background factors related to prosthetic selection at baseline, survival time analyses were performed with tooth loss as the endpoint. The adjusted variables were age, sex, number of restored teeth, periodontal status, and the practicing dentist's experience in years. The remaining teeth were classified into subcategories in relation to the missing molars. RESULTS: Overall, 58 patients (29 in each group) selected by PS matching were evaluated in the final analysis. The total number of lost teeth was 35 (FISPs group: n = 10; RPDs group: n = 25). The mean (±SD) period to tooth loss and the 10-year survival rates in the FISPs and RPDs groups were 51.6 (±30.1) months and 42.3 (±29.7) months, 70.5% and 16.4%, respectively. The log-rank test showed that significantly longer survival time in FISPs compared with RPDs. CONCLUSIONS: After adjustments for confounding factors using PS matching, replacing unilateral free-end missing teeth with FISPs may exhibit a lower tooth loss rate in adjacent and contralateral teeth compared to replacing with RPDs.

Radiographic evaluation of marginal bone levels around implants supporting splinted fixed bridges: A retrospective study on 412 implants.

OBJECTIVES: The effect of the implant position within the prosthesis on bone remodeling is scarcely documented so far. Thus, the aim of the present study was to investigate whether central implants may suffer higher peri-implant marginal bone levels (MBL) compared to laterals in case of fixed splinted bridges supported by ≥ three implants. MATERIALS AND METHODS: Partially edentulous subjects rehabilitated with at least one fixed bridge supported by ≥ three dental implants were enrolled. MBL was assessed radiographically by means of intraoral radiographs acquired with phosphor plates and imported in a dedicated software. MBL was calculated as the distance between the implant platform level and the most coronal visible bone-to-implant contact. A three-level linear mixed effects model was used for investigating the fixed effect of patient-, prosthesis-, and implant-level variables on the MBL. RESULTS: Overall, 90 patients rehabilitated with 130 splinted fixed bridges supported by 412 implants were included. The median follow-up was 136 months. The mean peri-implant MBL resulted statistically significantly higher at central implants if compared to lateral implants (p < .01). The estimated MBL averages for central and external implants were 1.68 and 1.18 mm, respectively. The prosthesis-level variables suggested that a cement-retained bridge was prone to a significant 0.82 mm higher MBL than a screw-retained one. Implant surface showed an association with MBL changes, although less pronounced than implant retention. CONCLUSIONS: In case of ≥3 adjacent implants supporting splinted bridges, central implants were more predisposed to MBL compared to laterals. At the prosthesis level, implants supporting cement-retained bridges were statistically more susceptible to MBL compared to screw-retained ones. Surface characteristics can also influence MBL stability at the implant level.

Biofilm accumulation on complete arch subperiosteal implant-supported prostheses: Effect of pontic type.

STATEMENT OF PROBLEM: Complete arch subperiosteal implant-supported prostheses present challenges in terms of effective cleaning, leading to the accumulation of biofilm on their intaglio surfaces. The association between different intaglio surface morphologies and biofilm accumulation on complete arch subperiosteal implant-supported prostheses is unclear. PURPOSE: The purpose of this in vitro study was to investigate the correlation between the intaglio surface of complete arch subperiosteal implant-supported prostheses and biofilm accumulation. MATERIAL AND METHODS: Sixty-eight complete arch subperiosteal implant-supported prostheses were fabricated with varying interimplant distances and pontic morphologies. Four different types of pontic morphologies were included: saddle, flat, scalloped, and ovate. To simulate biofilm accumulation, a green aerosol was sprayed onto the intaglio surface. Dental floss was used to clean the colored spray from the intaglio surface. The intaglio surfaces of prostheses were then scanned with an intraoral scanner. The biofilm areas were identified and calculated by using a 3-dimensional macroscopical quantification method. The distances between adjacent implants and transmucosal height were measured. The correlation between interimplant distances and biofilm areas, and the correlation between the biofilm areas and transmucosal height, were analyzed using the Spearman test. Furthermore, a generalized estimating equation (GEE) was employed to examine the relationship between pontic morphology and biofilm area, adjusting for location, cantilever, implant distance, and transmucosal height (α=.05). RESULTS: A significant correlation was found between the biofilm area and transmucosal height (correlation coefficient=0.208, P<.001). A significant increase in biofilm accumulation was observed in the saddle group compared with the 3 groups in GEE Models I and II. CONCLUSIONS: Flat pontics and ovate pontics have significantly lower biofilm retention. Moreover, transmucosal height plays a significant role in biofilm accumulation in the pontic area.

Initial damage and failure load of zirconia-ceramic and metal-ceramic posterior cantilever fixed partial dentures.

OBJECTIVES: The aim of this study was to compare failure load and initial damage in monolithic, partially veneered, and completely veneered (translucent) zirconia cantilevered fixed partial dentures (CFPDs), as well as completely veneered metal-ceramic CFPDs under different support and loading configurations. MATERIALS AND METHODS: Eight test groups with anatomically congruent CFPDs (n = 8/group) were fabricated, differing in CFPD material/support structure/loading direction (load applied via steel ball (Ø 6 mm) 3 mm from the distal end of the pontic for axial loading with a 2-point contact on the inner cusp ridges of the buccal and oral cusps and 1.3 mm below the oral cusp tip for 30° oblique loading): (1) monolithic zirconia/CoCr abutment teeth/axial, (2) monolithic zirconia/CoCr abutment teeth/oblique, (3) partially veneered zirconia/CoCr abutment teeth/axial, (4) partially veneered zirconia/CoCr abutment teeth/oblique, (5) completely veneered zirconia/CoCr abutment teeth/axial, (6) completely veneered CoCr/CoCr abutment teeth/axial (control group), (7) partially veneered zirconia/implants/axial, and (8) partially veneered zirconia/natural teeth/axial. Restorations were artificially aged before failure testing. Statistical analysis was conducted using one-way ANOVA and Tukey post hoc tests. RESULTS: Mean failure loads ranged from 392 N (group 8) to 1181 N (group 1). Axially loaded monolithic zirconia CFPDs (group 1) and controls (group 6) showed significantly higher failure loads. Oblique loading significantly reduced failure loads for monolithic zirconia CFPDs (group 2). Initial damage was observed in all groups except monolithic zirconia groups, and fractography revealed design flaws (sharp edges at the occlusal boundary of the veneering window) in partially veneered zirconia CFPDs. CONCLUSIONS: Monolithic zirconia CFPDs might be a viable alternative to completely veneered CoCr CFPDs in terms of fracture load. However, oblique loading of monolithic zirconia CFPDs should be avoided in clinical scenarios. Design improvements are required for partially veneered zirconia CFPDs to enhance their load-bearing capacity. CLINICAL RELEVANCE: Monolithic zirconia may represent a viable all-ceramic alternative to the established metal-ceramic option for CFPD fabrication. However, in daily clinical practice, careful occlusal adjustment and regular monitoring should ensure that oblique loading of the cantilever is avoided.

Perio-prosthodontic pontic site management, part II: Pontic site reconstruction strategies to enhance the esthetic and biological outcomes.

OBJECTIVE: Ridge deformities are present in most patients after tooth extraction; these defects make the management of future implant and pontic sites challenging to deal with. The restorative team should be able to diagnose and treat these deformities to allow for successful outcomes. Many approaches have been described to reconstruct pontic sites, each with specific indications. This article describes the different approaches to reconstructing pontic sites and their indications to allow for a proper esthetic and biological environment for future restorations. CLINICAL CONSIDERATIONS: Depending on the severity of the defect, location, and the esthetic necessity, pontic site enhancement can be done through different approaches, some requiring soft tissue grafting, hard tissue grafting, or both. Understanding the indications of the treatment options is essential to allow the clinician to make the right therapeutic decision and achieve the best possible perio-prosthodontic outcomes. CONCLUSIONS: An adequate balance between the soft tissue and prosthetics is essential to achieve successful results on implant-supported or tooth-supported fixed dental prostheses (FDPs). Selecting the right approach to treat ridge deformities is necessary to increase treatment success, reduce over-treatment, and create a biologically sound environment for restorations. CLINICAL SIGNIFICANCE: Pontic site enhancement through reconstructive surgery will allow for esthetically pleasing and biologically stable results, allowing restorations to emulate natural structures lost after tooth extraction.

Digital workflow for monolithic and veneered zirconia and metal-ceramic posterior fixed partial dentures: A five-year prospective randomized clinical trial.

Purpose To evaluate and compare the survival, success rates, and biological and technical complications of three-unit posterior monolithic and veneered zirconia and metal-ceramic (MC) posterior fixed partial dentures (FPDs) fabricated using a digital workflow and computer-aided design and computer-aided manufacturing (CAD/CAM) over a 5-year follow-up.Methods Ninety patients in need of three-unit posterior FPDs were randomized to receive monolithic zirconia (MZ), veneered zirconia (VZ), and MC restorations (n = 30 each). Teeth preparations were scanned using an intraoral scanner, and restorations were milled and cemented with resin cement. Clinical performance and periodontal parameters were assessed at baseline and yearly up to 5 years after insertion. Data analysis was performed using the Kaplan-Meier method, Friedman test, and Wilcoxon signed-rank test with Bonferroni correction and Mann-Whitney U test.Results The 5-year survival rates of the MZ, VZ, and MC FPDs were 87%, 97%, and 100%, respectively (P = 0.04). Most complications were biological in nature. Only one MZ FPD fractured 58 months after placement. All the restorations were assessed as satisfactory at each recall. Differences were found in the gingival index score over time in the VZ and MC groups. The margin index remained stable throughout the follow-up period in both zirconia groups.Conclusions The results of this study suggest that using a digital workflow to fabricate posterior FPDs is an adequate treatment option and that monolithic zirconia could be a viable alternative to metal-ceramic or veneered zirconia. However, further long-term studies are necessary to provide stronger evidence in patients with bruxism.

Anterior provisional fixed partial dentures: A finite element analysis.

PURPOSE: The aim of this study was to analyze the stress distribution of fiber-reinforced composite provisional fixed partial denture utilizing a finite element analysis model. MATERIAL AND METHODS: Three anterior teeth were collected: upper right central, left central, and right lateral incisors. A fiber-reinforced composite strip was applied to the palatal surfaces of the teeth. Micro-computed tomographic scans were acquired of the models in order to generate three-dimensional geometrical replicas. Finite element analysis was used to assess the stress distribution of fiber-reinforced composite provisional fixed partial denture using different pontic types under static applied forces that were 100, 30, and 0 N. RESULTS: The maximum stress values were found on the unprepared natural pontic. Stress values ranged from 92.2 to 909.8, 116.4 to 646.7, and 93.8 to 393.5 MPa for composite, naturally prepared, and natural unprepared pontic, respectively. CONCLUSIONS: Using unprepared natural tooth pontic in anterior provisional fixed partial denture to replace missing central incisors is considered superior to other types in terms of stress distribution.

Screw-retained ceramic-veneered/monolithic zirconia partial implant-supported fixed dental prostheses: A 5 to 10-year retrospective study on survival and complications.

PURPOSE: To assess the clinical performance of screw-retained, ceramic-veneered, monolithic zirconia partial implant-supported fixed dental prostheses (ISFDP) over 5-10 years and to evaluate implant- and prosthesis-related factors influencing treatment failure and complications. MATERIALS AND METHODS: Partially edentulous patients treated with screw-retained all-ceramic ISFDPs with 2-4 prosthetic units with a documented follow-up of ≥5 years after implant loading were included in this retrospective study. The outcomes analyzed included implant/prosthesis failure and biological/technical complications. Possible risk factors were identified using the mixed effects Cox regression analysis. RESULTS: A screened sample of 171 participants with 208 prostheses (95% of the restorations were splinted crowns without a pontic) supported by 451 dental implants were enrolled in this study. The mean follow-up duration after prosthesis delivery was 82.4 ±17.2 months. By the end of the follow-up period, 431 (95.57%) of the 451 implants remained functional at the implant level. At the prosthesis level, 185 (88.94%) of the 208 partial ISFDPs remained functional. Biological complications were observed in 67 implants (14.86%), and technical complications were observed in 62 ISFDPs (29.81%). Analysis revealed only emergence profiles (over-contoured) as a significant risk factor for implant failure (P<0.001) and biological complications (P<0.001). Full-coverage ceramic-veneered zirconia prostheses had a significantly greater chance of chipping (P<0.001) compared with buccal-ceramic-veneered or monolithic zirconia prostheses. CONCLUSIONS: Screw-retained ceramic-veneered, monolithic partial ISFDPs have a favorable long-term survival rate. Over-contoured emergence profile is a significant risk factor associated with implant failure and biological complications. Buccal-ceramic-veneered and monolithic zirconia partial ISFDPs lower the initial prevalence of chipping compared with a full-coverage veneered design.

Worn denture teeth of a full-arch implant-supported fixed dental prosthesis: A technique to restore.

Worn denture teeth continue to be a significant complication with implant-supported prostheses. This article discusses a case report that used an intraoral scanning system to restore an existing maxillary implant-supported prosthesis with significant posterior occlusal wear.  IPS e.max (Ivoclar Vivadent, Schaan, Liechtenstein) restorations were fabricated and cemented to the prepared posterior denture teeth to re-establish the occlusal vertical dimension and to help prevent further wear of the occlusal surfaces.