Protective effect of carvacrol hydrogel on the alveolar bone in rats with periodontitis.

OBJECTIVES: This study aimed to investigate the protective effect and mechanism of carvacrol hydrogel on the alveolar bone in rats with periodontitis. METHODS: A thermosensitive hydrogel supported by carvacrol was prepared using poloxamer and hydroxypropyl methyl cellulose as matrix. SD rats were randomly divided into blank group, periodontitis group, blank hydrogel group, and low-, medium-, and high-dose hydrogel groups. The periodontitis symptoms and the CT structure of the alveolar bone were observed. The changes in liver, spleen, kidney, and periodontal tissues were observed. The related indexes of bone metabolism in serum were detected. The expression of osteoprotegerin (OPG) and nuclear transcription factor-κB (NF-κB) pathway proteins was determined by Western blot. The levels of inflammatory factors were assessed by quantitative reverse transcription polymerase chain reaction (qRT-PCR). RESULTS: Carvacrol hydrogel had good slow release, biocompatibility, and cell adhesion. The periodontitis of rats in the carvacrol hydrogel group was significantly alleviated, the expression of OPG protein in gingival tissue was significantly increased (P<0.01), and the levels of receptor activator of NF-κB ligand (RANKL), receptor activator of NF-κB (RANK), NF-κB protein, and inflammatory factors were significantly decreased (P<0.01). CONCLUSIONS: Carvacrol hydrogel can regulate the OPG and NF-κB pathways, reduce alveolar bone absorption, and improve periodontal inflammation.

Comparative Investigation of Photobiomodulation in Diabetes-Impaired Alveolar Bone Healing: A Histomorphometrical and Molecular Study.

Objective: Diabetes mellitus is increasing worldwide. Photobiomodulation (PBM) is proposed as a therapeutic method in various medical concerns. This study aimed to compare the effects of PBM at the wavelengths of 660, 808, or 660 + 808 nm on alveolar bone healing in diabetic rats. Methods: Bilateral maxillary first molars were extracted from diabetic Wistar rats (n = 36). Right-sided sockets were treated by an In-Ga-Al-P laser at 660 nm (7.2 J/cm2, 24 s; DM660), Ga-Al-As laser at 808 nm (7 J/cm2, 14 s; DM808), or a combination of these two sets (DM-dual) (n = 12). Left sides served as controls. On days 7 or 14, specimens were assigned for histomorphometric or real-time PCR analysis of runt-related transcription factor 2, osteocalcin, collagen I, and vascular endothelial growth factor expression. Results: Irradiated sockets of groups DM-808 and DM-dual showed a significant increase in bone tissue and blood vessel establishment as compared to DM-660. Further, group DM-dual exhibited the least amount of fibrotic tissue as compared to the other groups. Conclusions: Within our study limits, the present experiment suggested PBM at 808 nm, alone or combined with 660 nm irradiation, could promote alveolar bone healing, along with minimal fibrosis induction, in diabetic rats.

Analysis of factors affecting bone volume changes after immediate implantation in the maxillary central incisor.

OBJECTIVES: This study aimed to evaluate the clinical outcomes of immediate implantation of single maxillary central incisor and explore factors affecting post-implant bone volume. METHODS: Clinical data and imaging records from pre-surgery, the day of surgery, and 6 months post-surgery of 100 patients (100 implants) with non-salvageable maxillary central incisors who underwent immediate implantation were collected. Bone thickness at the cervical, middle, and apical regions of the implant's labial and palatal sides were measured immediately post-surgery and at 6 months, and bone volume changes were observed. A regression analysis model was used to assess predictive factors for labial and palatal bone plate thickness. RESULTS: At 6 months post-surgery, the labial bone thicknesses at the cervical, middle, and apical regions were 2.35, 2.29, and 3.28 mm, respectively, and those of the palatal side were 0.00, 2.40, and 6.05 mm, respectively. The cervical region had the highest alveolar crest collapse rates, with 32.87% on the labial side and 62.20% on the palatal side. The regression model indicated that factors influencing the thickness of bone at the cervical labial side of the implant included initial bone thickness, the implant center to adjacent tooth center angle, implant diameter, and the type of implant closure (P<0.05). The initial bone thickness on the palatal side was the sole predictor for bone thickness on the palatal side (P<0.05). CONCLUSIONS: Immediate implantation of single maxillary central incisors yields effective clinical results. The thickness of new bone around the implant is influenced by multiple factors. A comprehensive consideration of these factors in the planning of immediate implantation is necessary to achieve optimal therapeutic outcomes.

Comparison of alveolar bone morphology after expansion with hybrid and conventional Hyrax expanders.

OBJECTIVES: To compare the buccal and palatal bone changes of maxillary posterior teeth produced by hybrid hyrax (HH) and conventional hyrax (CH) expanders in growing patients. MATERIAL AND METHODS: A sample of 32 patients with posterior crossbites in the late mixed dentition was recruited and randomly allocated into two groups. Group HH was composed of 18 individuals with a mean age of 10.7 years (six female, 12 male) treated with a hybrid expander with two anterior parasagittal miniscrews. Group CH was composed of 14 individuals with a mean age of 11.4 years (six female, eight male) treated with a conventional Hyrax expander. Cone-beam computed tomography (CBCT) exams were obtained before expansion (T1) and after 11 months when the expander was removed (T2). Buccal and palatal bone plate thickness and height of maxillary posterior teeth were measured. Intergroup comparisons were performed using t or Mann-Whitney tests (P < .05). RESULTS: The CH group showed greater decreases of the buccal bone plate height (mean change: 1.27 mm) at the maxillary first premolars compared to the HH group (mean change: 0.11 mm, P = .001). No intergroup difference was found for changes in the buccal and palatal bone thickness. CONCLUSIONS: Hybrid expanders showed a tendency to cause less negative impact on the buccal bone plate height of first premolars compared to conventional Hyrax expanders. However, the difference was not clinically significant. Both hybrid and conventional Hyrax expanders are safe for the alveolar bone morphology in the late mixed dentition.

Orthodontic treatment outcome predictive performance differences between artificial intelligence and conventional methods.

OBJECTIVES: To evaluate an artificial intelligence (AI) model in predicting soft tissue and alveolar bone changes following orthodontic treatment and compare the predictive performance of the AI model with conventional prediction models. MATERIALS AND METHODS: A total of 1774 lateral cephalograms of 887 adult patients who had undergone orthodontic treatment were collected. Patients who had orthognathic surgery were excluded. On each cephalogram, 78 landmarks were detected using PIPNet-based AI. Prediction models consisted of 132 predictor variables and 88 outcome variables. Predictor variables were demographics (age, sex), clinical (treatment time, premolar extraction), and Cartesian coordinates of the 64 anatomic landmarks. Outcome variables were Cartesian coordinates of the 22 soft tissue and 22 hard tissue landmarks after orthodontic treatment. The AI prediction model was based on the TabNet deep neural network. Two conventional statistical methods, multivariate multiple linear regression (MMLR) and partial least squares regression (PLSR), were each implemented for comparison. Prediction accuracy among the methods was compared. RESULTS: Overall, MMLR demonstrated the most accurate results, while AI was least accurate. AI showed superior predictions in only 5 of the 44 anatomic landmarks, all of which were soft tissue landmarks inferior to menton to the terminal point of the neck. CONCLUSIONS: When predicting changes following orthodontic treatment, AI was not as effective as conventional statistical methods. However, AI had an outstanding advantage in predicting soft tissue landmarks with substantial variability. Overall, results may indicate the need for a hybrid prediction model that combines conventional and AI methods.

Evaluation of dentoalveolar changes following maxillary incisor intrusion with one vs two anterior miniscrews in subjects with gummy smile: a randomized clinical trial.

OBJECTIVES: To examine dentoalveolar changes following intrusion of maxillary incisors with one or two anterior miniscrews in subjects with gummy smile and deep bite. MATERIALS AND METHODS: Forty-three subjects were selected and divided into two groups: group I (22 subjects: 15 women, 7 men; mean age 30 ± 10 years) received one miniscrew between the upper central incisors, and group II (21 subjects: 16 women, 5 men; mean age 30 ± 10 years) received two miniscrews between the canines and lateral incisors. Dentoalveolar parameters, including amount of intrusion, root resorption, incisor inclination, alveolar bone thickness, and buccal alveolar crest height (cementoenamel junction to labial alveolar crest), were evaluated using cone-beam computed tomography scans obtained before and after intrusion. The intergroup comparison was analyzed using a paired t-test and unpaired t-test to determine significant changes within and between groups. RESULTS: The amount of intrusion was significantly greater in group II than in group I (P < .05). No statistically significant differences were found between groups I and II for changes in incisor inclination, labial bone thickness, and buccal alveolar crest height (P > .05). CONCLUSIONS: Maxillary central and lateral incisor intrusion was significantly greater in subjects treated with two miniscrews. Root resorption of the maxillary central incisors was notably greater in subjects with one miniscrew, while maxillary lateral incisor resorption was greater in subjects treated with two miniscrews.

The efficiency of two different synthetic bone graft materials on alveolar ridge preservation after tooth extraction: a split-mouth study.

BACKGROUND: Alveolar Bone loss occurs frequently during the first six months after tooth extraction. Various studies have proposed different methods to reduce as much as possible the atrophy of the alveolar ridge after tooth extraction. Filling the socket with biomaterials after extraction can reduce the resorption of the alveolar ridge. We compared the height of the alveolar process at the mesial and distal aspects of the extraction site and the resorption rate was calculated after the application of HA/ß-TCP or synthetic co-polymer polyglycolic - polylactic acid PLGA mixed with blood to prevent socket resorption immediately and after tooth extraction. METHODS: The study was conducted on 24 extraction sockets of impacted mandibular third molars bilaterally, vertically, and completely covered, with a thin bony layer. HA/ß-TCP was inserted into 12 of the dental sockets immediately after extraction, and the synthetic polymer PLGA was inserted into 12 of the dental sockets. All sockets were covered completely with a full-thickness envelope flap. Follow-up was performed for one year after extraction, using radiographs and stents for the vertical alveolar ridge measurements. RESULTS: The mean resorption rate in the HA/ß-TCP and PLGA groups was ± 1.23 mm and ± 0.1 mm, respectively. A minimal alveolar bone height reduction of HA/ß-TCP was observed after 9 months, the reduction showed a slight decrease to 0.93 mm, while this rate was 0.04 mm after 9 months in the PLGA group. Moreover, the bone height was maintained after three months, indicating a good HA/ß-TCP graft performance in preserving alveolar bone (1.04 mm) while this rate was (0.04 mm) for PLGA. CONCLUSION: The PLGA graft demonstrated adequate safety and efficacy in dental socket preservation following tooth extraction. However, HA/ß-TCP causes greater resorption at augmented sites than PLGA, which clinicians should consider during treatment planning.

Simultaneous labial and lingual augmented corticotomy assisted presurgical orthodontics in class III patients: the morphological aspects of the mandibular anterior ridge with cone-beam computed tomography.

OBJECTIVES: This study aims to investigate the changes in alveolar bone following the simultaneous performance of labial and lingual augmented corticotomy (LLAC) in patients with insufficient alveolar bone thickness on both the labial and lingual sides of the mandibular anterior teeth during presurgical orthodontic treatment. MATERIALS AND METHODS: Thirth-five surgical patients with skeletal Class III malocclusion were included: 19 (LLAC group) accepted LLAC surgery during presurgical orthodontic treatment, and 16 (non-surgery group, NS) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T0) and at the completion of presurgical orthodontic treatment (T1). The amount of vertical alveolar bone and contour area of the alveolar bone in the labial and lingual sides of mandibular incisors were measured. RESULTS: After presurgical orthodontic treatment, the contour area of the alveolar bone at each level on the lingual side and alveolar bone level on both sides decreased significantly in the NS group (P < 0.001). However, the labial and lingual bone contour area at each level and bone level increased significantly in the LLAC group (P < 0.001). The bone formation rate in the lingual apical region was the highest, significantly different from other sites (P < 0.001). CONCLUSIONS: During presurgical orthodontic treatment, LLAC can significantly increase the contour area of the labio-lingual alveolar bone in the mandibular anterior teeth to facilitate safe and effective orthodontic decompensation in skeletal Class III patients. CLINICAL RELEVANCE: This surgery has positive clinical significance in patients lacking bone thickness (< 0.5 mm) in the labial and lingual sides of the lower incisors.

Development of a correction coefficient for radiographic evaluation of the alveolar bone crest: a pilot study.

OBJECTIVES: To analyze the differences in cusp height on radiographs, establishing proportional relationships between cusp and alveolar bone crest (ABC) measurements. The goal of this study was to develop a correction coefficient by considering this proportion. MATERIALS AND METHODS: Twenty-one artificial teeth, molars and premolars, and bovine ribs were used. Interproximal radiographs were taken with the aid of a positioner. The vertical angles used were: 0°, + 5°, and + 10°, and processed using three spatial resolutions measured in line pairs per mm (lp/mm): 20, 25 and 40. The Perio filter was applied to each image, in addition to the original one. Combinations of angle, resolution, and filter were made. Eighteen images were analyzed by three specialists, resulting in 252 measurements for each evaluator, totaling 756 measurements. RESULTS: The overall variability of the measurements can be explained mainly by the variation in tooth anatomy. The 0° 25 lp/mm Perio filter method was the closest one to the actual clinical scenario for both cusps and ABC. The correction factor managed to explain 71.45% of the errors. CONCLUSIONS: The variation in vertical angulation interferes with cusp and ABC measurements, and the angulation at 0º and spatial resolution of 25 lp/mm showed better results. The use of correction coefficients allowed approaching actual measurement values. CLINICAL RELEVANCE: More accurate ABC height measurements are essential even in radiographic exams that do not meet the standard of excellence because the need to repeat radiographic exams is then eliminated.

Competence of allogenic demineralized tooth matrix in socket seal surgery for alveolar ridge preservation: a randomized control clinical trial.

OBJECTIVES: To assess and compare the clinical, radiological, and histological outcomes of socket seal surgery between two protocols: deproteinized demineralized tooth matrix (dpDTM) and freeze-dried bone allograft (FDBA) each covered with a free gingival graft. MATERIALS AND METHODS: Twenty extraction sockets in the anterior or premolar region were randomly allocated to either the dpDTM or FDBA protocol (n = 10 per group). Measurements of the alveolar ridge changes were obtained using an intraoral scanner and cone-beam computed tomography at 3 months post-operation. Three-month post surgery, the dental implant was installed (n = 5 per group), bone biopsies were obtained for histomorphometrical and micro-computed tomography analyses. Implant stability quotients (ISQs) were determined and compared at 3 months post-implant. RESULTS: Lower significant reductions in buccal alveolar ridge height and hard tissue volume were observed in dpDTM group compared to FDBA group at 3 months (0.25 ± 0.35 mm vs. 1.60 ± 0.66 mm [p = .000] and 9.64 ± 15.39% mm3 vs. 31.45 ± 18.11% mm3 [p = .010], respectively). At the same time, lower soft tissue volume reduction was detected in the dpDTM group compared to FDBA group (4.21 ± 5.25% mm3 vs. 5.25 ± 5.79% mm3). No statistically significant difference in the percentage of mineralized tissue formation was found between dpDTM group (53.39 ± 11.16%) and FDBA group (49.90 ± 3.27%). Even though the ISQ in the dpDTM group showed a higher value than the FDBA group at 3 months post-implant, the results were without statistical significance. CONCLUSIONS: Alveolar ridge preservation using dpDTM is an efficacious procedure for providing the conditions for the development of functional and esthetic implants.

Effects of coenzyme Q10 on orthodontic tooth movement and alveolar bone remodeling in rats.

OBJECTIVES: To evaluate the effects of coenzyme Q10 (CoQ10) on alveolar bone remodeling and orthodontic tooth movement (OTM). MATERIALS AND METHODS: An orthodontic appliance was placed in 42 female Sprague‒Dawley rats were divided into two groups: the orthodontic force (OF) group (n = 21) and the OF + CoQ10 (CoQ10) treatment group (n = 21). Each group was divided into 3 subgroups, and the rats were sacrificed on days 3, 7 and 14. The rats in CoQ10 and OF groups were administered 100 mg/kg b.w./day CoQ10 (in 1 mL/b.w. soybean oil) and 1 mL b.w./day soybean oil, respectively, by orogastric gavage. The OTM was measured at the end of the experiment. The osteoclast, osteoblast and capillary numbers; vascular endothelial growth factor (VEGF), receptor activator nuclear kappa B ligand (RANKL) and osteoprotegrin (OPG) levels in tissue; and total antioxidant status (TAS) and total oxidant status (TOS) in blood were determined. RESULTS: Compared with the OF group, the CoQ10 treatment group exhibited decreased orthodontic tooth movement and osteoclast and capillary numbers. Indeed, the levels of VEGF and RANKL decreased, while the levels of OPG increased except on day 7. Additionally, the CoQ10 treatment group exhibited lower TOS and higher TAS on days 7 and 14 (p < 0.05). Histological findings showed that the morphology of osteoblasts changed in the CoQ10 group; however, there was no significant difference in the number of osteoblasts between the groups (p > 0.05). CONCLUSION: Due to its effect on oxidative stress and inflammation, CoQ10 regulates bone remodeling by inhibiting osteoclast differentiation, promoting osteoblast differentiation and reducing the amount of OTM. CLINICAL RELEVANCE: Considering that OTM may be slowed with the use of CoQ10, topics such as orthodontic treatment duration, orthodontic force activation and appointment frequency should be considered in treatment planning. It is predicted that the use of CoQ10 will support the effectiveness of treatment in clinical applications such as preventing relapse in orthodontic treatment by regulating bone modulation and anchorage methods that suppress/optimize unwanted tooth movement.

Effect of estrogen depression on alveolar bone microarchitecture and periodontal ligament cells during orthodontic movement.

This study aimed to evaluate the effects of the estrogen depression during orthodontic tooth movement on alveolar bone microarchitecture and periodontal ligament. Female Wistar rats were divided into two groups, one consisting of non-ovariectomized animals subjected to orthodontic tooth movement, and one comprising ovariectomized animals subjected to orthodontic tooth movement. Micro-CT assessment of bone volume to total volume (BV/TV), total porosity, trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) in the alveolar bone of the orthodontically moved tooth was performed. Histomorphometric analyses were made in the periodontal ligament, and immunoexpression of RANK, RANKL, OPG, and TUNEL were quantified. Orthodontic tooth movement in the group of ovariectomized rats was faster than in non-ovariectomized animals. The alveolar bone area showed lower values of BV/TV and trabecular thickness, and higher bone porosity and trabeculae numbers in the ovariectomized rats. Histological analyses in the ovariectomized group revealed an increase in collagen fibers in the periodontal ligament. The apoptotic cell counts in the periodontal ligament were higher in the group of ovariectomized rats than in the sham-operated rats. Ovariectomy resulted in an increase in tooth movement and alteration of the alveolar bone microstructure in the first 7 day of orthodontic tooth movement, and in the presence of apoptotic cells in the periodontal ligament.

Comparison of clinical efficacy between autologous partially demineralized dentin matrix and deproteinized bovine bone mineral for bone augmentation in orthodontic patients with alveolar bone deficiency: a randomized controlled clinical trial.

BACKGROUND: It is common to see patients who need orthodontic treatment but with insufficient alveolar bone volume. However, safe and effective tooth movement requires sufficient alveolar bone width and height. The aim of this study is to compare the bone augmentation efficacy of Autologous Partially Demineralized Dentin Matrix (APDDM) and Deproteinized Bovine Bone Mineral (DBBM) in orthodontic patients with insufficient bone by using a randomized controlled clinical trial approach. MATERIALS AND METHODS: Twenty-seven orthodontic patients involving 40 posterior teeth alveolar sites (n = 40) with insufficient alveolar bone volume were randomly divided into a control group (n = 20) and an experimental group (n = 20). The patients in the experimental group were treated with APDDM, and those in the control group were treated with DBBM. After surgery, the adjacent teeth are moved toward the bone grafting sites according to the orthodontic treatment plan. Patients completed a postoperative response questionnaire by the Visual Analogue Scale (VAS) score to indicate pain and swelling in the bone grafted area at the time of suture removal; and CBCT scans were conducted before surgery, 6 months and 2 years after surgery to assess changes in buccal and central alveolar heights, as well as widths at the alveolar ridge apex and 3 mm, 5 mm below the apex, respectively. The CBCT image sequences were imported into Mimics 21.0 software in DICOM format. The data of the patients in both groups were collected and analyzed by SPSS 25.0. RESULTS: The VAS scores were significantly lower in the APDDM group than in the DBBM group (p < 0.05). Significant increases were observed in alveolar bone height and width at 6 months and 2 years postoperative (p < 0.05); At 2 years, the APDDM group exhibited a reduction in buccal crest height and in 3 mm, 5 mm width below alveolar ridge apex, relative to 6 months (p < 0.05), while the DBBM group showed a decrease only in the central height of the alveolar bone (p < 0.05). There was a significant bone augmentation increase found only 3 mm below the alveolar ridge apex in the APDDM group compared with the DBBM group among all 6 months group comparison (p < 0.05). At 2 years, the augmentation effects were similar across both groups (p > 0.05). CONCLUSION: Radiomics analysis indicates that APDDM serves as a viable bone augmentation material for orthodontic patients with insufficient alveolar bone volume, achieving comparable clinical efficacy to DBBM. Additionally, APDDM is associated with a milder postoperative response than DBBM. THE REGISTRATION NUMBER (TRN): ChiCTR2400084607.

A persistent mineralization process in alveolar bone throughout the postnatal growth stage in rats.

OBJECTIVE: Alveolar bone quality is essential for the maxillofacial integrity and function, and depends on alveolar bone mineralization. This study aims to investigate the in vivo changes in alveolar bone mineralization, from the perspective of mineral deposition and crystal transition in postnatal rats. DESIGN: Nine postnatal time points of Wistar rats, ranging from day 1 to 56, were set to obtain the maxillary alveolar bone samples. Each time point consisted of ninety rats, with 45 females and 45 males. Macromorphology of alveolar bone was reconducted by Micro-Computed Tomography and the mineral content was quantified via Thermogravimetric analysis, Scanning Electron Microscope, High-Resolution Transmission Electron Microscopy and vibrational spectroscopy. Furthermore, the crystallinity and composition were characterized by vibrational spectroscopy, X-ray Diffraction, X-ray Photoelectron Spectroscopy and Selected Area Electron Diffraction. RESULTS: The progressive increase of mineral deposition was accompanied by substantial growth in alveolar bone mass and volume in postnatal rats. Whereas the mineral percentage initially decreased and then increased, reaching a nadir on postnatal day 14 (P14) when tooth eruption was first observed. Besides, localized mineralization was initiated by the formation of amorphous precursors and then converted into mineral crystals, while there was no statistically significant change in the average crystallinity of the bone during growth. CONCLUSION: Mineralization of alveolar bone is ongoing throughout the early growth in postnatal rats. Mineral deposition increases with age, whereas the crystallinity remains stable within a certain range. Besides, the mineral percentage reaches its lowest point on P14, which may be attributed to tooth eruption.

Melatonin and Metformin Mitigate Doxorubicin-Induced Alveolar Bone Toxicity.

Evidence concerning the osteotoxic effects of chemotherapy (doxorubicin) has been previously described. Periodontitis also progressively increases in patients receiving chemotherapy; however, the beneficial effects of melatonin and metformin on the alleviation of doxorubicin-induced osteotoxicity have never been investigated. Therefore, we investigated the negative impact of doxorubicin on alveolar bone homeostasis and the benefits of melatonin and metformin on the attenuation of doxorubicin-induced alveolar bone toxicity. Male Wistar rats were divided into 4 groups to receive either 1 mL of normal saline solution as a control group, 3 mg/kg of doxorubicin, 3 mg/kg of doxorubicin plus 10 mg/kg of melatonin, or 3 mg/kg of doxorubicin plus 250 mg/kg of metformin. Doxorubicin treatment was given on days 0, 4, 8, 15, 22, and 29, while interventions were given daily on days 0 to 29. Following euthanasia, blood and alveolar bones were collected for evaluation of oxidative stress, bone remodeling, inflammation, microarchitecture, and periodontal condition. We found that doxorubicin increased systemic oxidative stress, decreased antioxidative capacity, increased inflammation, decreased bone formation, increased bone reabsorption, impaired microarchitecture, and impaired periodontal condition of the alveolar bone. Although cotreatment with melatonin or metformin resulted in some improvement in these parameters, cotreatment with melatonin was more effective than cotreatment with metformin in terms of decreasing oxidative stress, reducing bone resorption, and improving microarchitecture and periodontal condition. All of these findings highlight the potential for antioxidants, especially melatonin, to ameliorate doxorubicin-induced alveolar bone toxicity.

Periodontal Ligament Cell Apoptosis Activates Lepr+ Osteoprogenitors in Orthodontics.

Alveolar bone (AB) remodeling, including formation and absorption, is the foundation of orthodontic tooth movement (OTM). However, the sources and mechanisms underlying new bone formation remain unclear. Therefore, we aimed to understand the potential mechanism of bone formation during OTM, focusing on the leptin receptor+ (Lepr+) osteogenitors and periodontal ligament cells (PDLCs). We demonstrated that Lepr+ cells activated by force-induced PDLC apoptosis served as distinct osteoprogenitors during orthodontic bone regeneration. We investigated bone formation both in vivo and in vitro. Single-cell RNA sequencing analysis and lineage tracing demonstrated that Lepr represents a subcluster of stem cells that are activated and differentiate into osteoblasts during OTM. Targeted ablation of Lepr+ cells in a mouse model disrupted orthodontic force-guided bone regeneration. Furthermore, apoptosis and sequential fluorescent labeling assays revealed that the apoptosis of PDLCs preceded new bone deposition. We found that PDL stem cell-derived apoptotic vesicles activated Lepr+ cells in vitro. Following apoptosis inhibition, orthodontic force-activated osteoprogenitors and osteogenesis were significantly downregulated. Notably, we found that bone formation occurred on the compression side during OTM; this has been first reported here. To conclude, we found a potential mechanism of bone formation during OTM that may provide new insights into AB regeneration.

Comparative Effectiveness of an Autologous Dentin Matrix for Alveolar Ridge Preservation.

An urgent issue is the preservation or reconstruction of the volume of bone tissue in planning and surgical treatment in the fields of medicine, such as traumatology, orthopedics, maxillofacial surgery and dentistry. After tooth extraction, resorption of the bone tissue of the alveolar crest of the jaws occurs, which must either be further eliminated by performing additional operations or using osteoplastic material for socket preservation at the extraction stage. Background and Objectives: The aim of the study was a comparative analysis of various osteoplastic materials used to preserve the volume of bone tissue in the preimplantation period. Materials and Methods: As part of the study, 80 patients were treated, who underwent socket preservation using xenografts, plasma enriched with growth factors, an autologous dentin matrix (ADM) and hydroxyapatite. Results: The results of the treatment 16 weeks after removal were comprehensively analyzed using a morphometric analysis of the bone's volume, cone beam tomography and morphological examination of burr biopsy specimens, as well as by determining the stability of the installed implant at different stages of treatment. Conclusions: The lowest level of bone tissue resorption according to the CBCT data was noted in the ADM and xenograft groups. It should be noted that the use of osteoplastic material in jaw surgery when reconstructing alveolar defects is an essential procedure for preventing the atrophy of bone tissue.

Fibrin-konjac glucomannan-black phosphorus hydrogel scaffolds loaded with nasal ectodermal mesenchymal stem cells accelerated alveolar bone regeneration.

BACKGROUND: Effective treatments for the alveolar bone defect remain a major concern in dental therapy. The objectives of this study were to develop a fibrin and konjac glucomannan (KGM) composite hydrogel as scaffolds for the osteogenesis of nasal mucosa-derived ectodermal mesenchymal stem cells (EMSCs) for the regeneration of alveolar bone defect, and to investigate the osteogenesis-accelerating effects of black phosphorus nanoparticles (BPNs) embedded in the hydrogels. METHODS: Primary EMSCs were isolated from rat nasal mucosa and used for the alveolar bone recovery. Fibrin and KGM were prepared in different ratios for osteomimetic hydrogel scaffolds, and the optimal ratio was determined by mechanical properties and biocompatibility analysis. Then, the optimal hydrogels were integrated with BPNs to obtain BPNs/fibrin-KGM hydrogels, and the effects on osteogenic EMSCs in vitro were evaluated. To explore the osteogenesis-enhancing effects of hydrogels in vivo, the BPNs/fibrin-KGM scaffolds combined with EMSCs were implanted to a rat model of alveolar bone defect. Micro-computed tomography (CT), histological examination, real-time quantitative polymerase chain reaction (RT-qPCR) and western blot were conducted to evaluate the bone morphology and expression of osteogenesis-related genes of the bone regeneration. RESULTS: The addition of KGM improved the mechanical properties and biodegradation characteristics of the fibrin hydrogels. In vitro, the BPNs-containing compound hydrogel was proved to be biocompatible and capable of enhancing the osteogenesis of EMSCs by upregulating the mineralization and the activity of alkaline phosphatase. In vivo, the micro-CT analysis and histological evaluation demonstrated that rats implanted EMSCs-BPNs/fibrin-KGM hydrogels exhibited the best bone reconstruction. And compared to the model group, the expression of osteogenesis genes including osteopontin (Opn, p < 0.0001), osteocalcin (Ocn, p < 0.0001), type collagen (Col , p < 0.0001), bone morphogenetic protein-2 (Bmp2, p < 0.0001), Smad1 (p = 0.0006), and runt-related transcription factor 2 (Runx2, p < 0.0001) were all significantly upregulated. CONCLUSIONS: EMSCs/BPNs-containing fibrin-KGM hydrogels accelerated the recovery of the alveolar bone defect in rats by effectively up-regulating the expression of osteogenesis-related genes, promoting the formation and mineralisation of bone matrix.

ANATOMICAL VARIABILITY OF THE ALVEOLAR PROCESS OF THE MAXILLA BASED ON MULTISLICE COMPUTED TOMOGRAPHY DATA.

Modern research methods, widely implemented in routine medical practice, open new horizons for the study of anatomical structures. The maxilla is one of the regions of the human skull that shows significant variability with age and gender. This is due to the peculiarities of tooth eruption and age-related changes in the periodontium and adjacent structures, which undoubtedly affect the structure of the alveolar process, sometimes drastically altering it over time. The aim of our study was to determine the anatomical variability of the alveolar process of the maxilla based on multislice computed tomography data. MATERIAL AND METHODS: The research was conducted based on the results of 400 spiral computed tomography scans of males and females aged 18 to 95 years with detection of the anatomical variability of the alveolar process. RESULTS: The average height of the alveolar process was 14.3±0.99x10^-3 m. The thickness of the wall also showed considerable variability. It was maximal in the middle part and minimal in the lateral part of the wall, measuring 1.905±0.021x10^-3 m and 1.15±0.011x10^-3 m, respectively. CONCLUSIONS: We determined its thickness, density, and identified teeth whose roots are connected to the maxillary sinus. The thickness of the alveolar process correlates with the volume of the sinus, showing a strong negative correlation (r=-0.92). Thus, with larger sinus sizes, the alveolar process has a smaller thickness. According to calculations, there is a correlation between the upper facial index and the size of the alveolar process (r=0.64). In dolichocephalic individuals, the longitudinal size is greater than in brachycephalic individuals, where the transverse size of the alveolar process prevails.

Variations in the alveolar bone morphology in maxillary molar area: a retrospective CBCT study.

BACKGROUND: This study quantitatively analyzed the anatomic structure of the alveolar bone in the maxillary molar region at three potential locations for Temporary Anchorage Device (TAD) placement. Additionally, the study compared the variability in this region across different age groups, sagittal skeletal patterns, vertical facial types, and sexes. METHODS: In this retrospective cone-beam computed tomography study, the buccal alveolar bone was analyzed in the posterior molar area of 200 patients, the measurement items include buccal alveolar bone height, alveolar bone thickness, interradicular distance, and maxillary retromolar space. RESULTS: Buccal alveolar height was greatest in the U56 region. The interradicular space was largest in the U56 region and increased from the alveolar crest to the sinus floor. Buccal alveolar bone thickness was highest in the U67 region and generally increased from the alveolar crest to the sinus floor. The maxillary retromolar space gradually increased from the alveolar crest to the root apex. CONCLUSIONS: TADs are safest when placed in the buccal area between the maxillary second premolar and the first molar, particularly at the 9 mm plane. The U67 region is the optimal safe zone for TAD placement for maxillary dentition distalization. TADs placement in adolescents can be challenging. Maxillary third molar extraction can be considered for maxillary dentition distalization.