[Effect of a 10-Methacryloyloxydecyl Dihydrogen Phosphate- treated Bioceramic Sealer on the Bond Strength of an Endodontic Fiber Post: Multilayer Composite Disk Models and Ultra-highspeed Imaging Analysis].

PURPOSE: Multiple materials are found in the root canal after fiber-post cementation. The layer of a bioceramic-based (BC) sealer may affect the bond strength (σBS) of the fiber post in the root canal. The purpose of this study was to employ multilayer compos-ite-disk models in diametral compression to investigate whether the bond strength between a fiber post and root dentin can be in-creased by the application of a primer on the BC sealer. MATERIALS AND METHODS: The multilayers of materials in the root canal required 3D finite-element (FE) stress analyses (FEA) to pro-vide precise σBS values. First, BC sealer was characterized using x-ray powder diffraction (XRD) to determine when the sealer com-pletely set and the types of crystals formed to select which primer to apply to the sealer. We selected a 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-based primer to treat the BC sealer before post cementation. Ultra-highspeed (UHS) imaging was utilized to analyze the crack initiation interface. The obtained failure force was used in FE analysis to calculate σBS. RESULTS: UHS imaging validated the fracture interface at the post-dentin junction as FEA simulations predicted. σBS values of the fiber posts placed with various material combinations in the root canal were 21.1 ± 3.4 (only cement/ post), 22.2 ± 3.4 (BC sealer/cement/post) and 28.6 ± 4.3 MPa (10-MDP primer treated BC sealer/cement/post). The 10-MDP-treated BC sealer exhibited the highest σBS (p < 0.05). CONCLUSION: The multilayer composite disk model proved reliable with diametral compression testing. The presence of BC sealer in the root canal does not reduce σBS of the fiber post. Conditioning the BC sealer layer with 10-MDP primer before fiber-post cemen-tation increases σBS.

Evaluation of the root dentin bond strength and intratubular biomineralization of a premixed calcium aluminate-based hydraulic bioceramic endodontic sealer.

PURPOSE: This study evaluated the dentin bonding strength and biomineralization effect of a recently developed premixed calcium aluminate-based endodontic sealer (Dia-Root Bio Sealer) in comparison with existing calcium silicate-based sealers. METHODS: The root canals of 80 mandibular premolars were filled with Dia-Root Bio Sealer, Endoseal MTA, EndoSequence BC Sealer, and AH Plus Bioceramic Sealer. Medial and apical specimens were then obtained by sectioning. The push-out bond strength was measured using the medial specimens, and the failure mode was recorded. Intratubular biomineralization in the apical specimens was analyzed using scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS). The data were analyzed using one-way analysis of variance followed by the Tukey test (P < 0.05). RESULTS: The push-out bond strength of Dia-Root Bio Sealer was significantly higher than that of the other tested materials, and a cohesive failure pattern was observed in all groups. Dia-Root Bio Sealer also exhibited a significantly higher degree of biomineralization than the other groups, and EDS analysis indicated that the biomineralized precipitates were amorphous calcium phosphate. CONCLUSION: The results of this study indicate that Dia-Root Bio Sealer has the potential to be used as an adequate root canal sealer due to its favorable bonding performance.

[In vitro study on cytotoxicity, osteogenic potential and antibacterial activity of silicate root canal sealers].

PURPOSE: To evaluate the in vitro biocompatibility and antibacterial activity of a new type of strontium silicate-based C-Root SP root canal sealer, and to provide a reference for clinical selection of sealers. METHODS: C-Root SP, iRoot SP and AH Plus extracts were prepared, L929 cells and MC3T3-E1 cells were cultured in vitro, and the cytotoxicity and osteogenic potential of the three sealers were compared. Fresh sealers were mixed with Enterococcus faecalis solution and the antibacterial activity of the sealer was determined by direct contact text (DCT). SPSS 25.0 software package was used for statistical analysis. RESULTS: At 24, 48, and 72 h, the cytotoxicity of the sealers in each group were significantly different (P＜0.01). Compared with AH Plus, the cytotoxicity of C-Root SP was lower (P＜0.01). C-Root SP was superior to AH Plus in promoting the activity of alkaline phosphatase(ALP) (P＜0.01). iRoot SP was the strongest in promoting the formation of mineralized nodules, followed by C-Root SP, and the weakest was AH Plus(P＜0.01). C-Root SP inhibited the growth of Enterococcus faecalis, and its antibacterial rate was significantly higher than AH Plus(P＜0.01). CONCLUSIONS: The strontium silicate root canal sealer C-Root SP has low cytotoxicity, certain osteogenic potential and antibacterial activity against Enterococcus faecalis, so it can be used for root canal filling.

Antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin on Enterococcus faecalis: A confocal laser scanning microscopic study.

Background: Sealers with antimicrobial properties play an important role in endodontic therapy success especially against Enterococcus faecalis infection found in failed root canal therapy. Addition of antibiotic agents to endodontic sealers may show significant increase in their antibacterial properties both against anaerobic and aerobic microbes. The purpose of the present study was to evaluate antimicrobial efficacy of Kerr pulp canal sealer (EWT) in combination with 10% amoxicillin against E. faecalis and post-root canal treatment viability of Enterococcus faecalis on the first and seventh day. Methods: A total of 60 extracted human mandibular premolar teeth were decoronated after initial decontamination with 1% NaOCl. Root length standardized to 12 mm. Canal instrumentation was done using ProTaper Universal file system till size F2 using 5.25% NaOCl. It was then infected with a pure strain of E. faecalis for a period of four days. Obturation was done using plain sealer, (n=30) and sealer-antibiotic combination, (n=30). Half of the teeth were sectioned at 24 hours (S, SA) and other half were sectioned seven days after obturation (S7, SA7). All samples were stained with SYTO9 and propidium iodide for imaging under Confocal Laser Scanning microscope. Statistical analysis was performed with the statistical software SPSS v. 17.0 (SPSS for Windows; SPSS Inc, Chicago, IL). Data was analysed using One Way ANOVA and post hoc Tukey test to determine statistical significance with p value < 0.01 considered significant. Results: Statistically significant differences were observed in green to red ratio between group S (9.561976) and S7 (0.435418) (p < 0.01). There was no difference found between SA (mean of green to red ratio, (0.70431) and SA7 (mean of green to red ratio, 0.85184). Conclusions: Antibiotics added to the sealer effectively eradicated of E. faecalis 24 hours post-obturation. However, after seven days, plain sealer was as effective as sealer-antibiotic combination.

Physicochemical Properties and Biocompatibility of Various Bioceramic Root Canal Sealers: In Vitro Study.

INTRODUCTION: The aim of this study was to compare the physicochemical properties and biocompatibility of various calcium silicate-based bioceramic sealers (CSBSs). METHODS: Four recently developed CSBSs, including AH Plus Bioceramic Sealer (AHB), EndoSequence BC Sealer (ESB), TotalFill BC Sealer (TTB), and Bio-C Sealer (BIC), were compared with the epoxy resin-based sealer AH Plus (AHP). Their physical properties, including flow, setting time, radiopacity, dimensional stability, and pH, were evaluated according to the International Organization for Standardization (ISO) 6876. Their cytotoxicity in human periodontal ligament fibroblast (hPDLF) was assessed through the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and compared. Additionally, cell attachment to the sealer surface was analyzed using green fluorescent protein and confocal laser scanning microscopy to evaluate cell viability. Data were analyzed using a one-way analysis of variance to determine the difference between groups for categorical variables, followed by Tukey's post hoc test at the significance level of 95%. RESULTS: The flow, setting time, and radiopacity of all tested CSBSs satisfied the ISO 6876/2012 standards. Further, these CSBSs showed shrinkage after immersion in distilled water for 30 days and complied with the ISO 6876/2001 requirements. The pH values of AHB, ESB, TTB, and BIC were greater than 11, whereas AHP had a pH of 6.69 after 4 weeks. CSBS showed excellent biocompatibility compared with that of AHP (P < .05). Confocal laser scanning microscopy showed that alive hPDLFs were attached well to all the tested CSBSs but not to AHP. CONCLUSIONS: CSBSs have similar physical characteristics within the ISO standards and higher biocompatibility than epoxy resin-based sealers.

Inflammatory response to epoxy resin and calcium silicate sealers preheated with different temperatures: an in vivo study.

OBJECTIVE: To determine the impact of heat exposure of different sealers on inflammatory cytokine secretions and tissue response in vivo. MATERIALS AND METHODS: Silicone tubes were prefilled with epoxy resin (ER) or calcium silicate (CS) sealers, preheated at 37, 60, or 120 °C, and implanted in rat subcutaneous site. Peri-implant exudate and tissue were analyzed after 1 and 4 weeks for cytokine secretions and tissue organization. RESULTS: At 1 week, 120 °C-preheated CS and ER induced higher secretions of tumor necrosis factor alpha (TNF-α) and interleukin 6 (IL-6), respectively, as compared to sham/empty tube groups. At 4 weeks, whereas TNF-α secretion was reduced in CS, it increased in ER group, particularly for 120 °C. Both sealers revealed high IL-6 after 4 weeks as compared to sham/empty tube, and generally, higher IL-6 secretions were associated with ER. Histology at 1 week revealed lower degree of inflammatory infiltrate in the groups of the highest preheating temperature (120 °C). Nonetheless, at 4 weeks, whereas fibrous capsule area and inflammatory infiltrate remained low in the CS120 group, they were high in ER120. CONCLUSION: Preheating ER sealer to 120 °C induced high and prolonged secretion of proinflammatory cytokines (TNF-α and IL-6), whereas this effect was transient for the CS sealer. This was associated with increased fibrous capsule and inflammatory infiltrate in response to 120 °C-preheated ER. CLINICAL RELEVANCE: Heat-induced changes in sealer properties alter the inflammatory response in vivo, which may affect the clinical outcome. This will not only help appropriate selection of obturation technique for different sealers, but also for optimizing the properties of new generation of sealers.

Effect of different sealer activation techniques on dentinal tubule penetration.

The aim of this study was to evaluate the influence of different activation techniques on dentin tubule penetration of root canal sealer. Seventy-five teeth with single canals were chemomechanically prepared. A calcium silicate-based sealer was stained with a fluorescent dye (rhodamine B), placed into the canals and activated according to the following groups: control (no activation), EDDY, EndoActivator, ultrasonic and XP-Endo Finisher. Then, the samples were obturated. The percentages of sealer penetration at various depth levels of root sections were measured with confocal laser scanning microscopy. XP-Endo Finisher presented the highest penetration at 50 µm (p < 0.05). XP-Endo Finisher showed similar penetration with EDDY at 100 and 200 µm (p > 0.05) while presented higher penetration than the other groups (p < 0.05). At 500 µm, XP-Endo Finisher presented higher penetration than EndoActivator (p < 0.05) while similar penetration with the other groups (p > 0.05). XP-Endo Finisher can be recommended for activation during sealer placement for better penetration into dentin tubules.

Effect of three different photosensitizers in photodynamic therapy on bond strength of a calcium silicate-based sealer to radicular dentin.

To evaluate the effect of the photodynamic therapy (PDT) using with different photosensitizers on the bond strength of BioRoot RCS (BR) to radicular dentin by comparing with AH Plus (AH). The shaped root canals of 80 human mandibular premolars were divided into four groups based on the final disinfection protocol: NaOCl/EDTA, PDT with methylene Blue (MB), PDT with curcumin (CUR) and PDT with toluidine blue O (TBO) (n = 20). Each group was randomly divided into two subgroups (n = 10), according to the endodontic sealer used for obturation (n = 10). The test of push-out bond strength (PBS) was performed using an universal test machine. The data were analysed using ANOVA, Tukey post-hoc, and independent sample t-test (α = 0.05). MB-BR group showed the highest PBS at the cervical level (p < 0.05). The selection of the photosensitizer in PDT influenced adhesion of root canal sealers to radicular dentin.

Physicochemical and Biological Properties of AH Plus Bioceramic.

INTRODUCTION: The purpose of this study was to evaluate the physicochemical and biological properties of AH Plus Bioceramic (AHPB; Dentsply Sirona, Charlotte, NC) in comparison to AH Plus (AHP, Dentsply Sirona) and EndoSequence BC Sealer (BC; Brasseler, Savannah, GA). METHODS: The setting time, radiopacity, flow, solubility, calcium ion release, and pH were evaluated following ISO guidelines. Surface characterization and chemical constitution were evaluated by scanning electron microscopy/energy-dispersive X-ray spectroscopy. The antibacterial effect was tested against Enterococcus faecalis. Sealer cytotoxicity was tested using the XTT cell viability assay. Analysis of variance, Tukey, and unpaired t tests were used with a significance level of 5%. RESULTS: The initial setting time of AHPB was shorter than AHP and BC (P ≤ .0001), whereas AHP showed a shorter final setting time (P ≤ .0001). AHPB was more radiopaque than BC (P = .0012) but less radiopaque than AHP (P = .0001). AHPB was more soluble than AHP (P ≤ .0001), whereas no difference was observed between AHPB and BC (P > .05). Immersion in phosphate-buffered saline decreased the solubility of AHPB and BC (P ≤ .005). AHPB calcium ion release was higher than AHP (P ≤ .05) but less than BC (P ≤ .0001). AHPB had the highest flow followed by AHP and BC (P > .05). All sealers were alkaline and able to eradicate E. faecalis. Surface morphology and chemical composition of all sealers changed after immersion in water and phosphate-buffered saline. Cell viability for AHPB and BC was higher than AHP (P ≤ .0001). CONCLUSIONS: AHPB presented adequate properties to be considered a good sealer, however, the high solubility may negatively impact the quality of the obturation.

Synthesis of silver core-shell nanoparticles and their influence on an experimental resin endodontic sealer: An in vitro analysis.

AIM: To avoid root canal recontamination and endodontic treatment failure, endodontic sealers with antibacterial activity could be an alternative. Silver nanoparticles have antibacterial activity and this study aimed to synthesize Ag@SiO2 nanoparticles, incorporate them into an experimental endodontic resin sealer and evaluate their influence on physicochemical and biological properties. METHODOLOGY: Ag@SiO2 nanoparticles were produced using the sol-gel process, based on the Stöber method. The particles were characterized in terms of their chemical structure by Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), UV-Vis spectral analysis, scanning electron microscopy, and transmission electron microscopy, where the particle morphology and diameter were analysed. A dual-cured experimental endodontic resin sealer was formulated using 70 wt% UDMA, 15 wt% GDMA, and 15 wt% BisEMA. The photoinitiators were added separately in two pastes. The Ag@SiO2 nanoparticles were incorporated into the endodontic sealer at the concentrations of 2.5 wt%, 5 wt%, and 10 wt%, and a control group without nanoparticles was also formulated. The endodontic sealers were evaluated for their flow, film thickness, degree of conversion, softening in solvent, radiopacity, cytotoxicity and antibacterial activity immediately and after 9 months in water storage. RESULTS: Silver was detected in the chemical characterization of Ag@SiO2 that presented a spheric regular shape and average 683.51 nm ± 93.58 diameter. Sealers presented adequate flow and film thickness while radiopacity values were below the ones required by ISO 6876. All groups underwent softening after immersion in a solvent. The 10 wt% groups showed a higher loss of subsurface hardness (∆KHN%). No reduction in cell viability was observed. Enterococcus faecalis viability in biofilm was reduced in 10 wt% groups after 24 h and 9 months. CONCLUSION: The addition of 10 wt% Ag@SiO2 reduced E. faecalis viability at immediate and longitudinal analysis while maintaining the physicochemical properties of developed sealers.

Evaluation of Antibacterial Effect of New Sealer "Neoseal" and Two Commercially Used Endodontic Sealers against Enterococcus faecalis: An In Vitro Study.

AIM: To evaluate the antibacterial activity of three endodontic sealing materials, Neoseal, CeraSeal, and AH Plus against Enterococcus faecalis bacteria in vitro. MATERIALS AND METHODS: The antibacterial activity of three endodontic sealing materials including two bioceramic sealers; NeoSEALER Flo (group I), CeraSeal (group II), and one epoxy resin sealer; AH Plus (group III) was investigated against E. faecalis bacteria American Type Cell Culture Collection (ATCC) 29212 (ATCC, Rockville, Maryland, USA). Using modified direct contact test (MDCT). The endodontic sealers were tested in contact with bacterial suspension when unset (20 minutes after mixing) and after setting, assessing the antibacterial activity of aged sealers after 1, 3, 7, and 14 days. Analyzing the collected data has been done with version 25.0 of the statistical package for the social sciences (SPSS) IBM software (SPSS, Chicago, Illinois, USA). Descriptive analyses were calculated using standard deviation (SD) and mean. Shapiro-Wilk test was done to detect the normality of the result values. Kruskal-Wallis test was then performed to test the level of significance between groups. RESULTS: After 20 minutes - Group I showed higher bacterial count mean values (5,500 ± 500) and 0 values for groups II and III groups. After 1 day, the highest bacterial count mean values were in group III (54,333.3 ± 4,041.5) and 0 values for groups I and II. After 3 days - group III again recorded the highest bacterial count mean values (45,000 ± 5,000) and 0 values for I and II groups. After 7 days - Group III still recorded the highest bacterial count mean values (53,333.3 ± 1,527.5) and 0 values for groups I and II. After 14 days - Group III recorded the highest bacterial count mean values (56,000 ± 1,000) followed by group II (6,333.3 ± 577.4), and the least was group I (2,000 ± 500). Kruskal-Wallis test showed significant values between groups in all tested durations, p > 0.05. CONCLUSION: The sealing material AH Plus showed a strong bactericidal effect at the beginning but lost its ability after 24 hours. CeraSeal showed strong bactericidal activity from the beginning till the end of the first week but showed bacterial count at 14 days. Neoseal took 24 hours to show bactericidal effect and similar to CeraSeal showed bacterial count at 14 days; CeraSeal recorded the best results within the study. CLINICAL SIGNIFICANCE: Silicate-based (bioceramic) endodontic sealers can be the best available endodontic sealing material that is clinically beneficial in removing residual microbes which had survived irrigation protocols and chemomechanical preparation. How to cite this article: Basta DG, Reslan MR, Rayyan M, et al. Evaluation of Antibacterial Effect of New Sealer "Neoseal" and Two Commercially Used Endodontic Sealers against Enterococcus faecalis: An In Vitro Study. J Contemp Dent Pract 2023;24(11):871-876.

Cleaning and microstructural effects of amyl acetate on pulp chamber dentin impregnated with epoxy resin-based endodontic sealer.

OBJECTIVE: To evaluate the cleaning potential of 95% ethanol, acetone, and amyl acetate solutions used solely or in association, to remove epoxy resin-based sealer residues from pulp chamber dentin and their microstructural effects. MATERIALS AND METHODS: One hundred and eighty bovine incisor specimens were divided into nine groups according to the cleaning protocol: ET (ethanol); AC (acetone); AA (amyl acetate); E1: AA+AC; E2: AA+ET; E3: AC+ET; E4: AA+AC+ET; PC (positive control), and NC (negative control). All groups were impregnated with epoxy resin-sealer, except NC. Ninety specimens were divided into groups (n = 10) for evaluation of persistence of residues and amount of open dentinal tubules by SEM analysis and evaluation of chemical compounds on the dentin surface after cleaning with electron dispersive spectroscopy. The others 90 specimens were submitted to Knoop microhardness evaluation. Persistence of residues data were submitted to the Kruskal Wallis and Dunn tests (α = 0.05). Open dentinal tubules and microhardness data were submitted to one-way ANOVA and Mann Whitney tests (α = 0.05). RESULTS: AA and E4 protocols showed the lowest persistence of residues. E4 group had the highest incidence of open dentinal tubules. E3 and E4 groups showed no changes in the atomic ratio Ca/P, which was similar to NC group. E4 group did not present W, an element presents in all the other groups. ET and E4 protocols showed the smallest reduction in dentin microhardness. CONCLUSIONS: The combination of amyl acetate, acetone and ethanol is the most effective and safe protocol to remove epoxy sealer residues on pulp chamber dentin. Moreover, it has the lowest microhardness reduction. CLINICAL SIGNIFICANCE: The combined use of amyl acetate, acetone, and ethanol enhanced the cleaning of pulp chamber dentin with minimal microstructural damage.

Cytocompatibility and bioactive potential of AH Plus Bioceramic Sealer: An in vitro study.

AIM: To assess the cytocompatibility and bioactive potential of the new calcium silicate cement-based sealer AH Plus Bioceramic Sealer (AHPbcs) on human periodontal ligament stem cells (hPDLSCs) compared with the epoxy resin-based sealer AH Plus (AHP) and the calcium silicate cement-based sealer Endosequence BC Sealer (ESbcs). METHODOLOGY: Standardized sample discs and 1:1, 1:2 and 1:4 eluates of the tested materials were prepared. The following assays were performed: surface element distribution via SEM-EDX, cell attachment and morphology via SEM, cell viability via a MTT assay, cell migration/proliferation via a wound-healing assay, osteo/cemento/odontogenic marker expression via RT-qPCR and cell mineralized nodule formation via Alizarin Red S staining. HPDLSCs were isolated from extracted third molars. Comparisons were made with hPDLSCs cultured in unconditioned (negative control) or osteogenic (positive control) culture media. Statistical significance was established at p < .05. RESULTS: A higher peak of Ca2 + was detected from ESbcs compared with AHPbcs and AHP in SEM-EDX. Both AHPbcs and ESbcs showed significantly positive results in the cytocompatibility assays (cell viability, migration/proliferation, attachment and morphology) compared with a negative control group, whilst AHP showed significant negative results. Both AHPbcs and ESbcs exhibited an upregulation of at least one osteo/odonto/cementogenic marker compared with the negative and positive control groups. Both ESbcs and AHPbcs showed a significantly higher calcified nodule formation than the negative and positive control groups, indicative of their biomineralization potential and were also significantly higher than AHP group. CONCLUSION: AH Plus Bioceramic Sealer exhibited a significantly higher cytocompatibility and bioactive potential than AH Plus and a similar cytocompatibility to that of Endosequence BC Sealer. Endosequence BC Sealer exhibited a significantly higher mineralization potential than the other tested sealers. The results from this in vitro study act as supporting evidence for the use of AH Plus Bioceramic Sealer in root canal treatment.

Impact of Dentin Conditioning and Sealer Modification With Chitosan-Hydroxyapatite Nanocomplexes on the Antibacterial and Mechanical Characteristics of Root Dentin.

INTRODUCTION: This study aimed to characterize the effectiveness of dentin conditioning with bio-mineralizable chitosan-hydroxyapatite precursor (CS-HA) nanocomplexes alone or associated with tricalcium silicate sealer (TCS/CS-HA) on the mechanical property and antibiofilm efficacy in root dentin. METHODS: Flow tests were performed following ISO6876:2012 specifications. Solubility was measured. Micromorphology was assessed using scanning electron microscopy (SEM). Nanohardness/elastic modulus were also determined. Fracture resistance was determined on lower premolars that were prepared, and randomly distributed among 7 groups (n = 8/group), including the control, CS-HA dentin-conditioning, and root canal-filled groups. Similar canal preparation/distribution procedure was followed to test the antibacterial effect on Enterococcus faecalis-infected roots. Descriptive statistics was used to report SEM findings. Flowability results were analyzed using paired t test. Multiple comparisons from solubility, fracture, and antibacterial assays were assessed by one-way analysis of variance-Tukey's tests. RESULTS: TCS/CS-HA showed optimal flow and no effect on solubility after immersion for 4 weeks (P > .05). TCS/CS-HA significantly increased nanohardness and elastic modulus (210 ± 11.3 MPa, 7.9 ± 0.9 GPa) compared with TCS (44.5 ± 7.8 MPa, 2.1 ± 0.3 GPa, P < .05). SEM revealed needle-shaped mineralized structures resulting in fewer voids and a well-adapted sealer-dentin interface in the TCS/CS-HA groups. NaOCl-EDTA irrigation resulted in reduced fracture resistance (444.34 N), whereas CS-HA dentin conditioning alone (928.28 N, P < .05) and CS-HA dentin-conditioning plus CS-HA/TCS resulted in higher fracture resistance (1134.06 N, P < .05). CS-HA dentin conditioning also reduced bacteria by 2.04 log (4.50 ± 0.43) from the initial bacterial load (6.54 ± 0.07, P < .05). There was further bacterial reduction when CS-HA-conditioned root canals were filled with TCS or TCS/CS-HA (0.00 to 0.98 ± 0.57, P > .05). CONCLUSION: Dentin modification with CS-HA increased the fracture resistance of root dentin, and decreased the residual bacterial burden. TCS/CS-HA potentiated the nanomechanical and physical properties of TCS.

The Effect of Primary Root Canal Treatment on Dentinal Tubule Penetration of Calcium Silicate-based Sealers during Endodontic Retreatment.

INTRODUCTION: The aim of this study was to evaluate the effect of previous root canal treatment on dentinal tubule penetration of calcium silicate-based sealers during endodontic retreatment and to compare 2 different (commonly used and modified) tubule penetration depth measurement techniques. METHODS: The crowns of mandibular premolar teeth were removed, and root canals were prepared (ProTaper Universal; Dentsply Sirona, York, PA) and obturated using AH Plus (AH; Dentsply DeTrey, Konstanz, Germany), MTA Fillapex (MTAF; Angelus, Londrina, Brazil), and WellRoot ST (WRST; Vericom, Gyeonggi-do, South Korea); 0.1% red Rhod-2 dye (Chemodex, St Gallen, Switzerland) was added to the sealers. After storage for 3 weeks (37°C, 100% humid), the following sealer combination subgroups were created (the sealer used during the primary root canal treatment/the sealer used during the retreatment, n = 8): AH/AH, AH/MTAF, and AH/WRST; MTAF/AH, MTAF/MTAF, and MTAF/WRST; and WRST/AH, WRST/MTAF, and WRST/WRST. Green Fluo-3 dye (0.1%) was added to the sealers during retreatment. Sealer penetration depths were measured at 8 points and averaged, and the ratio of the retreatment sealer to the initial sealer was recorded as the mean tubule penetration depth ratio in the first technique, whereas the percentage of the circumferential penetration area ratios of the retreatment and initial sealers was calculated in the second technique. Statistical analyses were performed using Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests. RESULTS: The mean penetration depth of AH and MTFA was found to be higher at the coronal third region in the control groups (P < .05). Both methods showed a significant difference among the groups at the coronal and median regions (P < .05). The AH/WRST, MTAH/AH, MTAF/MTAF, MTAF/WRSTS, and WRST/WRST groups showed deeper tubule penetration (first technique, P = .01). Both techniques showed that the penetration depth of the sealers was the same at the apical region (P > .05), whereas a difference was found among the techniques at the coronal and median regions. The sealers used in the previous root canal treatment limited the penetration depth of the sealers used during the retreatment process (P < .05). When MTAF was used as the initial sealer, the penetration depth of the second sealer did not change, whereas if WRST was the initial sealer, the penetration depth of the sealers at the median and apical regions is negatively affected during the retreatment process (P < .05). CONCLUSIONS: Previous root canal treatment affects the penetration depth of calcium silicate-based sealers. The use of AH Plus and MTA Fillapex during the retreatment process showed an advantage. Both measurement techniques showed similar performances at the apical region, whereas the results varied at the coronal and midcoronal regions; therefore, a more stable sealer penetration measurement technique is still necessary.

Comparison of Sealing Abilities Among Zinc Oxide Eugenol Root-Canal Filling Cement, Antibacterial Bioceramic Paste, and Epoxy Resin, using Enterococcus faecalis as a Microbial Tracer.

BACKGROUND This study aimed to compare sealing abilities among 3 root canal sealers, using Enterococcus faecalis as a microbial tracer. MATERIAL AND METHODS Sixty-six straight single-rooted teeth were subjected to crown removal at the cementoenamel junction. Root canals were instrumented using the crown-down technique. Prepared teeth were randomly divided into 3 groups of 22 teeth each, according to the sealer used: Canason zinc oxide eugenol root-canal filling cement, Well-Root ST antibacterial bioceramic paste, and AH 26 epoxy resin. Root canals were obturated using the lateral condensation technique, then stored at 37°C and 100% humidity for 1 week to allow sealers to set completely. Subsequently, bacterial leakage was tested using a 2-chamber method. Twice weekly, fresh E. faecalis was placed into the coronal portion of the filled root canal. Specimens were monitored at 24-h intervals for 33 days. The number of leaking samples and mean interval until leakage were compared among groups. RESULTS The mean intervals until leakage were 5.8 days in the Canason group, 1.5 days in the Well-Root ST group, and 13.3 days in the AH 26 group. These mean intervals significantly differed between the Canason and Well-Root ST groups (P=0.035) and between the AH 26 and Well-Root ST groups (P=0.012). After 33 days, survival rates were 31.8% in the Canason group, 90.9% in the Well-Root ST group, and 68.2% in the AH 26 group (P.

A comprehensive in vitro comparison of the biological and physicochemical properties of bioactive root canal sealers.

OBJECTIVES: To evaluate the biological and physicochemical features of bioactive root canal sealers. MATERIALS AND METHODS: Human periodontal ligament fibroblasts (hPDLF) and human osteoblasts (hOB) were exposed to eluates of three bioactive root canal sealers, GuttaFlow® bioseal (GF), BioRoot™ RCS (BR), and TotalFill® BC Sealer (TF), and the epoxy resin-based sealer AH plus® (AH). Cytotoxicity and cellular inflammatory response were evaluated. The osteogenic potential was examined using human mesenchymal stem cells (hMSC). Film thickness, flowability, and pH were assessed. Root canal treatment was performed on human extracted teeth to evaluate the sealers' tightness towards bacterial penetration. The antibacterial activity against common pathogens in primary root canal infections was tested. RESULTS: AH was severely cytotoxic to hPDLF and hOB (p < 0.001). The bioactive sealers were generally less cytotoxic. IL-6 levels in hPDLF were elevated in the presence of AH (p < 0.05). AH and GF suppressed IL-6 production in hOB (p < 0.05). AH and BR stimulated the PGE2 production in hPDLF and hOB (p < 0.05). BR was the only sealer that led to calcium deposits in hMSC (p < 0.05). TF and AH showed the lowest film thickness and the highest flowability. Bacterial tightness was best in teeth filled with AH and BR. All sealers showed similar antimicrobial activity, but the overall antimicrobial efficacy was moderate as the bacteria were reduced by just one log scale (p < 0.05). CONCLUSIONS: This study revealed favorable in vitro results regarding the biocompatibility of the bioactive root canal sealers. CLINICAL RELEVANCE: Bioactive root canal sealers may be a useful alternative to epoxy resin-based sealers.

Impact of cleansing protocols to remove endodontic sealer residues on the adhesive interface: Bonding with universal adhesive systems.

OBJECTIVE: The aim of this study was to evaluate the effectiveness of cleansing protocols to remove sealer residues using different cleaning strategies and the effect of bond strength of two universal adhesives to dentin impregnated with epoxy resin-based sealer. MATERIALS AND METHODS: Fifty bovine dentin specimens were impregnated with epoxy resin-based sealer containing calcium hydroxide (Sealer Plus) and submitted to cleansing protocols (n = 10): negative control (NC), positive control (PC), 95% ethanol (ET), xylol (XI), and amyl acetate (AA). Specimens were evaluated by scanning electron microscope (SEM). Other 100 specimens were submitted to the same protocols (n = 20). Each protocol was divided into subgroups (n = 10) according to the universal adhesive system used: Scotchbond Universal (SU); Ambar Universal (AU). Bond strength was evaluated by micro-shear bond test (µSBT). Persistence of residues data were assessed with Kruskal-Wallis and Dunn's tests. µSBT data were analyzed with two-way ANOVA (α = 5%). RESULTS: ET presented higher persistence of residues compared to AA and XI (p < 0.05). AA and XI were similar from each other (p > 0.05). AU and SU presented similar µSBT values, regardless of the cleansing solution (p > 0.05). SU-NC presented the highest µSBT among all conditions (p < 0.05). CONCLUSION: The bond strength of universal adhesives was not affected by different amounts of sealer residues after different cleaning protocols. CLINICAL SIGNIFICANCE: Non-polar substances such as amyl acetate and xylol are effective for removing residues from epoxy resin-based endodontic sealers.

Effect of chlorhexidine digluconate on antimicrobial activity, cell viability and physicochemical properties of three endodontic sealers.

OBJECTIVE: Assess the biological and physicochemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) leachates with and without chlorhexidine (CHX). METHODS: The sealers were studied in no contact and 1-minute contact with CHX. For biological properties (antibacterial activity and cytotoxicity), leachates were formed in saline of freshly mixed, 1-, 7- and 28 days set sealers. The antibacterial properties of sealer leachates were investigated for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus. The 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate murine fibroblast cell viability after exposure to the leachates. The physical properties (water uptake, sorption, solubility, porosity, surface characteristics) of sealers and the pH of the immersion liquid (saline or distilled water) were also assessed over a 28-days period. RESULTS: CHX improved the antibacterial properties of the sealer leachates and reduced cell viability for all sealer leachates, except for freshly mixed PCS. BioRoot RCS leachates presented the highest antibacterial properties and cell viability with and without CHX contact. PCS was the material most affected by CHX in terms of physical properties, whereas for AH Plus, solubility was increased. CHX did not affect the physical properties of BioRoot RCS, except for solubility that was decreased. CHX contact did not change sealers' alkalinity in distilled water whereas it increased it for AH Plus and BioRoot RCS in saline. SIGNIFICANCE: CHX improved the antibacterial efficacy of sealer leachates and either compromised or did not affect cell viability. CHX affected to various extent sealers' physicochemical properties.

Evaluation of the biological and physicochemical properties of calcium silicate-based and epoxy resin-based root canal sealers.

Biocompatibility, dimensional stability, radiopacity, flow, and low solubility are the characteristics of an ideal endodontic sealer. This study evaluated and compared in vivo and in vitro biological and physicochemical properties of calcium silicate-based sealers: Sealer Plus BC (BC), MTA Fillapex (MF); and resin-based sealers: AH Plus (AHP) and Sealer Plus (SP). Apical papilla cells were exposed to sealer extracts and subjected to MTT, SRB, scratch, alkaline phosphatase enzyme activity (ALP) and Alizarin red staining (ALZ) assays. Sealers were histologically evaluated in connective tissue of Wistar rats in different periods. Radiopacity, film thickness, flow, setting time, pH and element analyses were investigated. BC had better results compared to AHP and MF at hour 72 for MTT assay (p < .05), and the highest cell viability under SRB (p < .05). All sealers presented ALP activity. BC presented the highest mineralized deposition under ALZ (p < .05). BC and MF promoted wound healing. All sealers induced an initial inflammation reaction that decreased over time. Eosinophils were observed at day 7 in MF (p < .05). Despite MF did not present final setting time, the sealers properties were in accordance to ISO 6876/2012 and ASTM C266-08. All sealers presented cell viability and biocompatibility. BC presented higher pH values and bioactivity. The materials tested showed physico-chemical properties in accordance with standards, except for MF setting time.