Selective Isolation of Myosin Subfragment-1 with a DNA-Polyoxovanadate Bioconjugate.

The bioconjugation of a polyoxometalate (POMs), i.e., dodecavanadate (V12O32), to DNA strands produces a functional labeled DNA primer, V12O32-DNA. The grafting of DNA primer onto streptavidin-coated magnetic nanoparticles (SVM) produces a novel composite, V12O32-DNA@SVM. The high binding-affinity of V12O32 with the ATP binding site in myosin subfragment-1 (S1) facilitates favorable adsorption of myosin, with an efficiency of 99.4% when processing 0.1 mL myosin solution (100 µg mL-1) using 0.1 mg composite. Myosin adsorption fits the Langmuir model, corresponding to a theoretical adsorption capacity of 613.5 mg g-1. The retained myosin is readily recovered by 1% SDS (m/m), giving rise to a recovery of 58.7%. No conformational change is observed for myosin after eliminating SDS by ultrafiltration. For practical use, high-purity myosin S1 is obtained by separation of myosin from the rough protein extract from porcine left ventricle, followed by digestion with α-chymotryptic and further isolation of S1 subfragment. The purified myosin S1 is identified with matrix-assisted laser desorption/ionization time-of-flight/mass spectrometry, giving rise to a sequence coverage of 38%.

Maximum limit to the number of myosin II motors participating in processive sliding of actin.

In this work, we analysed processive sliding and breakage of actin filaments at various heavy meromyosin (HMM) densities and ATP concentrations in IVMA. We observed that with addition of ATP solution, the actin filaments fragmented stochastically; we then determined mean length and velocity of surviving actin filaments post breakage. Average filament length decreased with increase in HMM density at constant ATP, and increased with increase in ATP concentration at constant HMM density. Using density of HMM molecules and length of actin, we estimated the number of HMM molecules per actin filament (N) that participate in processive sliding of actin. N is solely a function of ATP concentration: 88 ± 24 and 54 ± 22 HMM molecules (mean ± S.D.) at 2 mM and 0.1 mM ATP respectively. Processive sliding of actin filament was observed only when N lay within a minimum lower limit (Nmin) and a maximum upper limit (Nmax) to the number of HMM molecules. When N < Nmin the actin filament diffused away from the surface and processivity was lost and when N > Nmax the filament underwent breakage eventually and could not sustain processive sliding. We postulate this maximum upper limit arises due to increased number of strongly bound myosin heads.

Calix[4]arene C-90 and its analogs activate ATPase of the myometrium myosin subfragment-1.

Numerous female reproductive abnormalities are consequences of disorders in uterus smooth muscle (myometrium) contractile function. In this work, we described activators of ATPase, which could be used for development of effective treatments for correcting this dysfunction. Myosin ATPase localized in the catalytic domain of myosin subfragment-1 transforms a chemical energy deposited in macroergic bonds of ATP into mechanical movement. It was shown that сalix[4]arene C-90 and its structural analogs functionalized at the upper rim of macrocycle with four or at least two N-phenylsulfonуltrifluoroacetamidine groups, are able to activate ATP hydrolysis catalyzed by myometrium myosin subfragment-1. It was shown with the method of computer modeling that N-phenylsulfonуltrifluoroacetamidine groups of calix[4]arene C-90 interact with responsible for binding, coordination and the hydrolysis of ATP amino acid residues of myosin subfragment-1. The results can be used for further research aimed at using calix[4]arene C-90 and its analogs as pharmacological compounds that can effectively normalize myometrium contractile hypofunction.

Chaperone-enhanced purification of unconventional myosin 15, a molecular motor specialized for stereocilia protein trafficking.

Unconventional myosin 15 is a molecular motor expressed in inner ear hair cells that transports protein cargos within developing mechanosensory stereocilia. Mutations of myosin 15 cause profound hearing loss in humans and mice; however, the properties of this motor and its regulation within the stereocilia organelle are unknown. To address these questions, we expressed a subfragment 1-like (S1) truncation of mouse myosin 15, comprising the predicted motor domain plus three light-chain binding sites. Following unsuccessful attempts to express functional myosin 15-S1 using the Spodoptera frugiperda (Sf9)-baculovirus system, we discovered that coexpression of the muscle-myosin-specific chaperone UNC45B, in addition to the chaperone heat-shock protein 90 (HSP90) significantly increased the yield of functional protein. Surprisingly, myosin 15-S1 did not bind calmodulin with high affinity. Instead, the IQ domains bound essential and regulatory light chains that are normally associated with class II myosins. We show that myosin 15-S1 is a barbed-end-directed motor that moves actin filaments in a gliding assay (∼ 430 nm · s(-1) at 30 °C), using a power stroke of 7.9 nm. The maximum ATPase rate (k(cat) ∼ 6 s(-1)) was similar to the actin-detachment rate (k(det) = 6.2 s(-1)) determined in single molecule optical trapping experiments, indicating that myosin 15-S1 was rate limited by transit through strongly actin-bound states, similar to other processive myosin motors. Our data further indicate that in addition to folding muscle myosin, UNC45B facilitates maturation of an unconventional myosin. We speculate that chaperone coexpression may be a simple method to optimize the purification of other myosin motors from Sf9 insect cells.

[Protective effect of tiacalix[4]arene-tetrasulphonate on heavy metal inhibition of myometrium myosin subfragment-1 ATP-hydrolase activity].

Heavy metals have a negative effect on the contractility of uterine smooth muscles (myometrium), these effects can lead to various pathologies of a women reproductive system. To overcome these effects the methods for correcting the myometrium contractile activity are to be developed. Catalyzed by myosin ATPase ATP hydrolysis is the most important reaction in the molecular mechanism of myometrium contraction. We have found an inhibitory effect of 0.03-0.3 mM Ni2+, Pb2+ and Cd2+ on enzymatic hydrolysis of ATP by myosin subfragment-1 obtained from swine uterine smooth muscles. We have demonstrated that 100 µM thiacalix[4]arene-tetrasulphonate (C-798) recovered to the control level of ATPase activity of myosin subfragment-1 in the presence of heavy metal cations. One of the most probable mechanisms of C-798 corrective activity is based on its ability to chelate heavy metals, thus cations Pb, Cd and Ni can be removed from the incubation medium. Computer simulation has demonstrated that the protective effect of C-798 may also be the result of weakening the interaction of heavy metal ions with amino acid residues of the myosin molecule near the active site of ATP hydrolase. The obtained results can be used for further research aimed at assessing the prospects of thiacalix[4]arene-tetrasulfonate as pharmacological compounds.

Avian synaptopodin 2 (fesselin) stabilizes myosin filaments and actomyosin in the presence of ATP.

Smooth muscle cells maintain filaments of actin and myosin in the presence of ATP, although dephosphorylated myosin filaments and actin-myosin interactions are unstable under those conditions in vitro. Several proteins that stabilize myosin filaments and that stabilize actin-myosin interactions have been identified. Fesselin or synaptopodin 2 appears to be another such protein. Rapid kinetic measurements and electron microscopy demonstrated that fesselin, isolated from turkey gizzard muscle, reduced the rate of dissociation of myosin filaments. Addition of fesselin increased both the length and thickness of myosin filaments. The rate of detachment of myosin, but not heavy meromyosin, from actin was also greatly reduced by fesselin. Data from this study suggest that fesselin stabilizes myosin filaments and tethers myosin to actin. These results support the view that one role of fesselin is to organize contractile units of myosin and actin.

Purification, crystallization and preliminary X-ray crystallographic analysis of squid heavy meromyosin.

All muscle-based movement is dependent upon carefully choreographed interactions between the two major muscle components, myosin and actin. Regulation of vertebrate smooth and molluscan muscle contraction is myosin based (both are in the myosin II class), and requires the double-headed form of myosin. Removal of Ca2+ from these muscles promotes a relatively compact conformation of the myosin dimer, which inhibits its interaction with actin. Although atomic structures of single myosin heads are available, the structure of any double-headed portion of myosin, including the ∼375 kDa heavy meromyosin (HMM), has only been visualized at low (∼20 Å) resolution by electron microscopy. Here, the growth of three-dimensional crystals of HMM with near-atomic resolution (up to ∼5 Å) and their X-ray diffraction are reported for the first time. These crystals were grown in off-state conditions, that is in the absence of Ca2+ and the presence of nucleotide analogs, using HMM from the funnel retractor muscle of squid. In addition to the crystallization conditions, the techniques used to isolate and purify this HMM are also described. Efforts at phasing and improving the resolution of the data in order to determine the structure are ongoing.

[Structural and functional bases of the intermolecular interaction of calix[4]arene C-97 with myosin subfragment-1 of myometrium].

Calix[4]arene C-97 (code is shown) is the macrocyclic compound which has lipophilic intramolecular higly-structured cavity formed by four aromatic cycles, one of which on the upper rim is modified by methylene bisphosphonic group. It was shown that calix[4]arene C-97 (100 microM) efficiently inhibits ATPase activity of myosin subfragment-1 from pig myometrium, the inhibition coefficient I(0.5) being 83 +/- 7 microM. At the same time, this compound at 100 microM concentration significantly increases the effective hydrodynamic diameter of myosin subfragment-1, that may be indicative of intermolecular complexation between the calix[4]arene and myosin head. Computer simulation methods (docking, molecular dynamics, involving the Grid) have been used to clarify structural basis of the intermolecular interaction of calix[4]arene C-97 with myosin subfragment-1 of the myometrium; participation of hydrophobic, electrostatic and pi-pi (stacking) interactions between calix[4]arene C-97 and amino acid residues of myosin subfragment-1, some of them being located near the active site of the ATPase has been found out.

[Kinetic regularities and mechanisms of action of calix[4]arene C-99 on ATPase activity of myosin subfragment-1 of myometrium].

It has been shown that calix[4]arene C-99 inhibited myosin subfragment-1 ATPase of myometrium. This inhibition is noncompetitive as to ATP and Mg2+. At the same time, this compound reduces the seeming enzymatic hydrolysis maximum rate of nucleoside triphosphate with respect to ATP and Mg2+. With the help of computer design the interaction of mentioned calix[4]arene with myosin subfragment-1 of myometrium has been investigated. Several mechanisms involved in the calix[4]arene C-99 inhibition of myosin head ATPase were supposed and participation of hydrogen, hydrophobic and electrostatic interactions in these mechanisms was discussed.

[The influence of caldesmon on strong binding of myosin with actin in denervated rat skeletal muscles].

The effect of caldesmon (CaD) on conformational changes in F-actin modified by fluorescent probe TRITC-phalloidin was investigated by polarized fluorimetry. Changes were induced by a subfragment-1 (S-1) of myosin in the absence or presence of CaD in ghost muscle fibers obtained from intact and denervated slow (SOL) and fast (EDL) skeletal muscles of rats. S-1 binding to actin of both SOL and EDL muscles was shown to cause changes in polarized parameters of TRITC-phalloidin typical for a strong actin-myosin binding as well as of transition ofactin subunits from "off" to "on" state. CaD inhibits this significantly. Denervation atrophy inhibits the effect of S-1 as well but does not affect the capability of CaD decreasing the formation of strong binding in actomyosin complex. It is supposed that CaD "freezes" F-actin structure in "off" state. The denervation atrophy has no effect on CaD responsibility to bind thin filaments and to switch "off" actin monomers.

Phosphorylation of a single head of smooth muscle myosin activates the whole molecule.

Regulatory light chain (RLC) phosphorylation activates smooth and non-muscle myosin II, but it has not been established if phosphorylation of one head turns on the whole molecule. Baculovirus expression and affinity chromatography were used to isolate heavy meromyosin (HMM) containing one phosphorylated and one dephosphorylated RLC (1-P HMM). Motility and steady-state ATPase assays indicated that 1-P HMM is nearly as active as HMM with two phosphorylated heads (2-P HMM). Single-turnover experiments further showed that both the dephosphorylated and phosphorylated heads of 1-P HMM can be activated by actin. Singly phosphorylated full-length myosin was also an active species with two cycling heads. Our results suggest that phosphorylation of one RLC abolishes the asymmetric inhibited state formed by dephosphorylated myosin [Liu, J., et al. (2003) J. Mol. Biol. 329, 963-972], allowing activation of both the phosphorylated and dephosphorylated heads. These findings help explain how smooth muscles are able to generate high levels of stress with low phosphorylation levels.

High-level expression and purification of a recombinant hBD-1 fused to LMM protein in Escherichia coli.

In this work, we present the production of an active 43 aa recombinant human beta-defensin-1 (rhBD-1(43)) in Escherichia coli AD202 cells using specific pLMM1-rhBD-1 expression system. Unique solubility properties of the C-terminal fragment of light meromyosin (LMM) allowed us to overcome foreseeable problems with isolation procedures and toxicity caused by rhBD-1 to the host organism. As a result, the majority of fusion protein (LMM-rhBD-1(43)) was obtained in the soluble state, isolated by a low salt-high salt treatment of total cell protein. The rhBD-1(43) was cleaved from the fusion with Protease 4 and purified on CM Sepharose Fast Flow column with the yield of approximately 1 mg rhBD-1(43) from 6 g of wet weight cells. Purified rhBD-1(43) showed antimicrobial activity against E. coli ML-35p at a concentration of 129 microM. The procedure of rhBD-1 expression and purification we present can provide a reliable and simple method for production of different cationic peptides for biological studies.

Visualization of caldesmon binding to synthetic filaments of smooth muscle myosin.

We have used synthetic filaments of unphosphorylated chicken gizzard myosin with a compact, highly ordered structure under relaxing conditions (in the absence of Ca2+ and in the presence of ATP) to visualize the mode of caldesmon binding to myosin filaments by negative staining and immunogold electron microscopy. We demonstrate that the addition of caldesmon to preformed myosin filaments leads to the appearance of numerous smooth projections curving out from the filament surface. The addition of caldesmon or its N-terminal fragment resulted in the partial masking of myosin filament periodicity. However, it did not change the inner structure of the filaments. It is demonstrated that most caldesmon molecules bind to myosin filaments through the N-terminal part, while the C-terminal parts protrude from the filament surface, as confirmed by immunoelectron microscopy visualization. Together with the available biochemical data on caldesmon binding to both actin and myosin and electron microscopic observations on the mode of caldesmon attachment to actin filaments with the C-termini of the molecules curving out from the filaments, the visualization of caldesmon attachment to myosin filaments completes the scenario of actin to myosin tethering by caldesmon.

Solution structure of heavy meromyosin by small-angle scattering.

Elucidation of x-ray crystal structures for the S1 subfragment of myosin afforded atomic resolution of the nucleotide and actin binding sites of the enzyme. The structures have led to more detailed hypotheses regarding the mechanisms by which force generation is coupled to ATP hydrolysis. However, the three-dimensional structure of double-headed myosin consisting of two S1 subfragments has not yet been solved. Therefore, to investigate the overall shape and relative orientations of the two heads of myosin, we performed small-angle x-ray and neutron scattering measurements of heavy meromyosin containing all three light chains (LC(1-3)) in solution. The resulting small-angle scattering intensity profiles were best fit by models of the heavy meromyosin head-tail junction in which the angular separation between heads was less than 180 degrees. The S1 heads of the best fit models are not related by an axis of symmetry, and one of the two S1 heads is bent back along the rod. These results provide new information on the structure of the head-tail junction of myosin and indicate that combining scattering measurements with high resolution structural modeling is a feasible approach for investigating myosin head-head interactions in solution.

A novel restricted photoaffinity spin-labeled non-nucleoside ATP analogue as a covalently attached reporter group of the active site of Myosin subfragment 1.

The photoaffinity spin-labeled non-nucleoside ATP analogue, 2-(4-azido-2-nitrophenyl)amino-2,2-(1-oxyl-2,2,6,6-tetramethyl-4-piperidylidene)di(oxymethylene)ethyl triphosphate (SSL-NANTP), has been shown to be a substrate for skeletal mysoin subfragment 1 (S1) that can be photoincorporated at the active site of S1 [Chen, X., et al. (2000) Bioconjugate Chem. 11, 725-733]. Electron paramagnetic resonance spectroscopy shows that the probe undergoes restricted motion with respect to the protein. The parent compound, NANTP (2-[(4-azido-2-nitrophenyl)amino]ethyl triphosphate), is specifically photoincorporated at Trp-130 on the amino-terminal 23 kDa tryptic fragment in rabbit skeletal myosin. Surprisingly, amino acid sequence analysis shows that SSL-NANTP is photoincorporated on the carboxy-terminal 20 kDa tryptic fragment at Lys-681 on the side opposite Trp-130 in the nucleotide pocket. This is the first direct evidence showing that this residue in the 20 kDa tryptic fragment is close enough to the active site to be photolabeled by trapped ATP analogues. After actin treatment in the presence of MgATP, SSL-NANDP-labeled myosin S1 had normal ATPase activity, indicating that photolabeling did not significantly alter the enzymatic properties of S1. Photoincorporated SSL-NANDP was bound inside the nucleotide site of S1, with an effective concentration of 20 mM as judged by the concentration of MgADP needed to displace it. Molecular dynamics simulations suggest that the ability of NANTP and SSL-NANTP to photolabel different sites results from different orientations of the phenyl ring in the active site. For SSL-NANTP, the p-azido group on the phenyl ring points toward Lys-681. For NANTP, it points in the opposite direction toward Trp-130.

Myosin V exhibits a high duty cycle and large unitary displacement.

Myosin V is a double-headed unconventional myosin that has been implicated in organelle transport. To perform this role, myosin V may have a high duty cycle. To test this hypothesis and understand the properties of this molecule at the molecular level, we used the laser trap and in vitro motility assay to characterize the mechanics of heavy meromyosin-like fragments of myosin V (M5(HMM)) expressed in the Baculovirus system. The relationship between actin filament velocity and the number of interacting M5(HMM) molecules indicates a duty cycle of > or =50%. This high duty cycle would allow actin filament translocation and thus organelle transport by a few M5(HMM) molecules. Single molecule displacement data showed predominantly single step events of 20 nm and an occasional second step to 37 nm. The 20-nm unitary step represents the myosin V working stroke and is independent of the mode of M5(HMM) attachment to the motility surface or light chain content. The large M5(HMM) working stroke is consistent with the myosin V neck acting as a mechanical lever. The second step is characterized by an increased displacement variance, suggesting a model for how the two heads of myosin V function in processive motion.

Functional roles of ionic and hydrophobic surface loops in smooth muscle myosin: their interactions with actin.

This investigation ascertains whether, in (smooth muscle) myosin, certain residues engage in functional interactions with their actin conjugates in an actomyosin complex. Such interactions have been postulated from putting together crystallographic models of the two proteins [Rayment, I., Rypniewski, W. R., Schmidt-Bäse, K., Smith, R., Tomchick, D. R., Benning, M. M., Winkelmann, D. A., Wesenberg, G., and Holden, H. M. (1993) Science 261, 50-58]. Here, in several instances, we ask whether mutation of a particular residue significantly impairs a function, and find that the answers are largely rationalized by the original postulation. Additionally, a novel element emerges from our investigation. To assess function, we test the wild type and mutant systems as they perform in the steady state of ATP degradation. In doing so, we assume, as usual, that degradation proceeds from an early stage in which the complex forms (and is described by parameter K(app)) to a later stage during which the product leaves the complex (and is described by parameter V(max)). Interestingly, certain defects induced by the mutations are associated with changes in K(app), and other defects are associated with changes in V(max), suggesting that our procedure at least roughly distinguishes between events according to the time in the degradation at which they occur. In this framework, we suggest that (1) in the actin-myosin association phase, cationic residues Lys-576 and Lys-578 interact with anionic residues of the so-called second actin, and (2) in the product leaving phase, hydrophobic residues Trp-546, Phe-547, and Pro-548, as well as the Thr-532/Asn-533/Pro-534/Pro-535 sequence, sever connections with the so-called first actin. The role of Glu-473 is also examined.

Native purification of biomolecules with temperature-mediated hydrophobic modulation liquid chromatography.

The high-resolution purification of native enzymes is impeded by the limitations in the mobile-phase choices required for conventional hydrophobic separations such as in reverse-phase chromatography. To avoid problems associated with varying the composition of the mobile phase, we developed a stationary phase with a hydrophobicity that can be modulated by slight variations in temperature to bind and elute biomolecules. This chromatographic matrix was tested on nucleotide analogs, amino acids, and protein samples. Visualization of the temperature-dependent hydrophobic interaction with the chromatographic matrix was performed with fluorescence microscopy of CY3-ATP. Amino acids adsorbed to the column according to their known hydrophobicities, confirming the hydrophobic nature of their interaction with the matrix. Biomolecules were separated by modulating the hydrophobicity of the column matrix with slight adjustments to the running temperature between 22 and 37 degrees C without changing the mobile phase. Freedom in the choice of a mobile phase for both the loading and the elution of samples provides great practical advantages by eliminating the need for buffer-exchange steps and allowing more native conditions for purifying delicate enzymes, such as myosin.

Kinetics of smooth muscle heavy meromyosin with one thiophosphorylated head.

Actin-activated MgATPase of smooth muscle heavy meromyosin is activated by thiophosphorylation of two regulatory light chains, one on each head domain. To understand cooperativity between heads, we examined the kinetics of heavy meromyosin (HMM) with one thiophosphorylated head. Proteolytic gizzard heavy meromyosin regulatory light chains were partially exchanged with recombinant thiophosphorylated His-tagged light chains, and HMM with one thiophosphorylated head was isolated by nickel-affinity chromatography. In vitro motility was observed. By steady-state kinetic analysis, one-head thiophosphorylated heavy meromyosin had a similar K(m) value for actin but a V(max) value of approximately 50% of the fully thiophosphorylated molecule. However, single turnover analysis, which is not sensitive to small amounts of active heads, showed that one-head thiophosphorylated heavy meromyosin was 46-120 times more active than unphosphorylated HMM but only 7-19% as active as the fully thiophosphorylated molecule. Discrepancy between the single turnover and steady-state values could be explained by a small fraction of rigor heads. These rigor heads would have a large effect on the steady-state kinetics of one-head thiophosphorylated HMM. In summary, thiophosphorylation of one head leads to a molecule with unique intermediate kinetics suggesting that thiophosphorylation of one head cooperatively alters the kinetics of the partner head and vice versa.

The interaction between the regulatory light chain domains on two heads is critical for regulation of smooth muscle myosin.

Recent findings have suggested that the interaction between the two heads is critical for phosphorylation-dependent regulation of smooth muscle myosin. We hypothesized that the interaction between the two regulatory light chains on two heads of myosin dictates the regulation of myosin motor function. To evaluate this notion, we engineered and characterized smooth muscle heavy meromyosin (HMM), which is composed of one entire HMM heavy chain and one motor domain truncated heavy chain containing the S2 rod and regulatory light chain (RLC) binding site, as well as the bound RLC (SMDHMM). SMDHMM was inactive for both actin-translocating activity and actin-activated ATPase activity in the dephosphorylated state, demonstrating that the interaction between the two RLC domains on the two heads and/or a motor domain and a RLC domain in a distinct head is sufficient for the inhibition of smooth muscle myosin motor activity. When phosphorylated, SMDHMM was activated for both actin-translocating activity and actin-activated ATPase activity; however, these activities were lower than those of double-headed HMM, implying partial release of inhibition by phosphorylation in SMDHMM and/or cooperativity between the two heads of smooth muscle myosin. The present results indicate that the RLC domain is critical for phosphorylation-dependent regulation of smooth muscle myosin motor activity. On the other hand, similar to double-headed HMM, SMDHMM showed both "folded" and "extended" conformations, and the ratio of those conformations is dependent on ionic strength, suggesting that the RLC domain is sufficient to regulate the conformational transition in myosin.