Accuracy of Invisalign® aligners in adult patients: a retrospective study of angular tooth movements.

OBJECTIVE: This retrospective study aimed to assess the predictability of Invisalign® aligners regarding rotational, mesio-distal and buccal-lingual tip movements. METHODS: Two materials were included in the analysis - EX30, used until 2013; and SmartTrack, in current use. The study comprised 56 adult patients treated with Invisalign Comprehensive. Data sample were assessed on three sets of digital models; model 1 - initial, model 2 - predicted, and model 3 - achieved. Sixty reference points were marked in each dental arch, and two reference planes assisted the superimposition. The degree of rotation, mesio-distal and buccal-lingual tip was obtained via trigonometric calculations, through a previously published validated method. The accuracy of outcomes was compared according to the types of tooth movement and teeth groups,and the influence of predetermined variables on movement accuracy was also investigated. RESULTS: Rotation and mesio-distal tip did not present any significant difference when comparing EX30 and SmartTrack groups. Only buccal-lingual tip presented a significant difference, incisor and canine groups treated with EX30 aligners presented an increase in accuracy (p= 0.007 and p = 0.007, respectively). For each additional degree planned for rotation movements, there was an increase of 0.35° in the discrepancy, and an increase of 0.40° and 0.41° for mesio-distal and buccal-lingual tip, respectively. EX30 and SmartTrack discrepancies were compared by multilevel linear regression. CONCLUSION: EX30 aligners reached higher accuracy for buccal-lingual tip in anterior teeth. However, for rotation and mesio-distal tip, SmartTrack and EX30 are similarly accurate. The total amount of planned movement has a significant impact on accuracy rates, with a decrease in accuracy for every additional degree.

Comparison of treatment effects between clear aligners and fixed appliances in patients treated with miniscrew-assisted molar distalization.

OBJECTIVES: The biomechanics in achieving molar distalization may differ between fixed appliances and clear aligners in the control of tooth movement. The objective of this study was to compare the treatment effects between clear aligners (CA) and fixed appliances (FA) in patients treated with miniscrew-assisted molar distalization. METHODS: The sample consisted of 46 subjects with mild-to-moderate crowding. A total of 22 patients treated with clear aligners (age, 25.66 ±â€…6.11 years old) and 24 patients treated with fixed appliances (age, 24.04 ±â€…4.95 years old) for miniscrew-assisted molar distalization were included in this study. The dental and skeletal changes were evaluated by the pre- and post-treatment lateral cephalograms. RESULTS: Significant changes were found with the vertical variables SN-OP angle (2.24 ±â€…3.22°, P < .05) and SN-MP angle (0.73 ±â€…1.15°, P < .05) for the FA group when compared with the CA group (SN-OP angle 0.41 ±â€…2.26° and SN-MP angle -0.21 ±â€…1.38°, P > .05). Both treatment groups achieved a 2-3 mm. molar distalization with significant intrusion of the upper molars. The CA group showed significantly less distal tipping of molars (U6^PP angle -2.29 ±â€…3.29° and L6^MP angle -2.92 ±â€…2.49°, P < .05) compared to the FA group (-5.24 ±â€…4.28° and -5.53 ±â€…5.03°, P < .05). In addition, significant retraction and lingual inclination of the upper and lower incisors were found in both groups. LIMITATIONS: The changes of tooth position were evaluated by 2D lateral cephalograms, not 3D measurements. CONCLUSIONS: Compared to fixed appliances, clear aligners seemed to have better control of vertical dimension and distal tipping of molars in patients treated with miniscrew-assisted molar distalization.

Patient-reported outcomes during accelerating the en-masse retraction of the upper anterior teeth using low-intensity electrical stimulation: a randomized controlled trial.

BACKGROUND: Low-intensity electrical stimulation (LIES) is considered a relatively recent technology that has received little attention in orthodontics as a method of acceleration. This study aimed to evaluate patient-reported outcome measures when LIES is used to accelerate the en-masse retraction of the upper anterior teeth. MATERIALS AND METHODS: The sample consisted of 40 patients (8 males, 32 females; mean age 21.1 ± 2.3 years), with Class II division I malocclusion who required extraction of the first premolars to retract upper anterior teeth. They were randomly assigned to the LIES group (n = 20) and the conventional en-masse retraction group (CER; n = 20). Patient responses regarding pain, discomfort, burning sensation, swelling, chewing difficulty, speech difficulty, and painkillers' consumption were recorded at these nine assessment times: 24 h (T1), 3 days (T2), and 7 days (T3) after force application, then in the second month after 24 h (T4), 3 days (T5), and 7 days (T6) of force re-activation, and finally after 24 h (T7), 3 days (T8), and 7 days (T9) of force re-activation in the third month. RESULTS: The mean values of pain perception were smaller in the LIES group than those in the CER group at all assessment times with no statistically significant differences between the two groups except during the second and third months (T5, T6, T8, and T9; P < 0.005). However, discomfort mean values were greater in the LIES group with significant differences compared to CER group during the first week of the follow-up only (T1, T2, and T3; P < 0.005). Burning sensation levels were very mild in the LIES group, with significant differences between the two groups at T1 and T2 only (P < 0.001). Speech difficulty was significantly greater in the LIES group compared to CER group at all studied times (P < 0.001). High levels of satisfaction and acceptance were reported in both groups, without any significant difference. CONCLUSION: Both the LIES-based acceleration of en-masse retraction of upper anterior teeth and the conventional retraction were accompanied by mild to moderate pain, discomfort, and chewing difficulty on the first day of retraction. These sensations gradually decreased and almost disappeared over a week after force application or re-activation. TRIAL REGISTRATION: ClinicalTrials.gov, ClinicalTrials.gov, NCT05920525. Registered 17 June 2023 - retrospectively registered, http://clinicaltrials.gov/study/NCT05920525?term=NCT05920525&rank=1 .

Predictability of tooth rotations in patients treated with clear aligners.

Clear aligners are employed daily for the treatment of several malocclusions. Previous clinical studies indicated low accuracy for the correction of tooth rotations. The aim of this study was to evaluate the predictability of tooth rotations with clear aligners. The sample comprised 390 teeth (190 mandibular; 200 maxillary), measured from the virtual models of 45 participants (21 men, 24 women; mean age: 29.2 ± 6.6 years old). For each patient, pre-treatment (T0) digital dental models (STL files), virtual plan (T1) and post-treatment digital dental models (T2) of both the mandibular and maxillary arches were imported onto Geomagic Control X, a 3D metrology software which allows angular measurements. Rotations were calculated by defining reproducible vectors for all teeth in each STL file and superimposing both T0 with T1 to determine the prescribed rotation, and T0 with T2 to determine the achieved rotation. Prescribed and achieved rotations were compared to assess movement's accuracy. The Wilcoxon signed-rank test and paired t-test were used to assess differences between the prescribed and achieved movements (P < 0.05). The overall predictability of rotational movement was 78.6% for the mandibular arch and 75.0% for the maxillary arch. Second molar accuracy was the lowest in both arches. Clear aligners were not able to achieve 100% of the planned movements.

Effect of attachment flash on clear aligner force delivery: an in vitro study.

BACKGROUND: The introduction of auxiliaries such as composite attachment has improved the force delivery of clear aligner (CA) therapy. However, the placement of the attachment may give rise to a flash, defined as excess resin around the attachment which may affect CA force delivery. This in vitro study aims to determine the differences in the force generated by the attachment in the presence or absence of flash in CA. MATERIALS AND METHODS: Tristar Trubalance aligner sheets were used to fabricate the CAs. Thirty-four resin models were 3D printed and 17 each, were bonded with ellipsoidal or rectangular attachments on maxillary right central incisors. Fuji Prescale pressure film was used to measure the force generated by the attachment of CA. The images of colour density produced on the films were processed using a calibrated pressure mapping system utilising image processing techniques and topographical force mapping to quantify the force. The force measurement process was repeated after the flash was removed from the attachment using tungsten-carbide bur on a slow-speed handpiece. RESULTS: The intraclass correlation coefficient showed excellent reliability (ICC = 0.96, 95% CI = 0.92-0.98). The average mean force exerted by ellipsoidal attachments with flash was 8.05 ± 0.16 N, while 8.11 ± 0.18 N was without flash. As for rectangular attachments, the average mean force with flash was 8.48 ± 0.27 N, while 8.53 ± 0.13 N was without flash. Paired t-test revealed no statistically significant difference in the mean force exerted by CA in the presence or absence of flash for both ellipsoidal (p = 0.07) and rectangular attachments (p = 0.41). Rectangular attachments generated statistically significantly (p < 0.001) higher mean force than ellipsoidal attachments for flash and without flash. CONCLUSION: Although rectangular attachment generated a significantly higher force than ellipsoidal attachment, the force generated by both attachments in the presence or absence of flash is similar (p > 0.05).

In vitro study examines posterior torque impact on 3D mechanics of anterior teeth in clear aligner treatment.

INTRODUCTION: This study utilizes investigate the impact of posterior torques on the three-dimensional force exerted on the lower anterior teeth during the retraction in orthodontic clear aligners treatment. METHODS: Four groups of mandibular dental arch light-cured resin models will be created, including: mandibular posterior teeth with standard torque, mandibular posterior teeth with labial torque, and mandibular posterior teeth with lingual torque. Each group will consist of 12 sets of clear aligners. The aligners will be worn, and measurements will be taken using the six-axis measurement platform to evaluate the three-dimensional force exerted on the lower anterior teeth under various initial torques applied to the mandibular posterior teeth. SPSS 26.0 used for ANOVA analysis, α = 0.05 significance level. RESULTS: Comparing mandibular posterior teeth with standard torque to those with labial torque, no statistically significant changes were observed in buccolingual force. In the mesiodistal direction, mandibular incisors exhibited a significant decrease in distal force, while canines showed a significant increase. Both findings had a significance level of P < 0.05; Lingual torque on mandibular posterior teeth, compared to standard torque, led to a significant increase in lingual force for incisors and a significant increase in labial force for canines in the buccolingual direction (P < 0.05). Additionally, mandibular incisors exhibited a significant decrease in distal force in the mesiodistal direction (P < 0.05). CONCLUSION: Varying initial torques on mandibular posterior teeth significantly impact force on lower anterior teeth. Labial torque reduces lingual force on incisors and increases distal force on canines. Lingual torque increases lingual force on incisors and labial force on canines.

Quality of occlusal outcome in adult class II patients after maxillary total arch distalization with interradicular mini-screws.

BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.

Orthodontic treatment of a patient with dentinogenesis imperfecta using a clear aligner system.

BACKGROUND: Orthodontic treatment for patients with dentinogenesis imperfecta (DGI) can be risky because of the fragility of their dental hard tissue. Although the Invisalign (Align Technology) clear aligner system should be a suitable orthodontic appliance for patients with DGI, to the authors' knowledge, there has been no related research. CASE DESCRIPTION: A 28-year-old woman with DGI sought treatment with a 1 mm open bite, edge-to-edge occlusion of the central incisors, and a bilateral Class III cusp-to-cusp molar relationship. Invisalign was applied for her treatment, and after 3 and one-half years of orthodontic therapy, a normal overjet and overbite were achieved, accompanied by retraction of the lower lip as well as a bilateral Class I molar relationship. In addition, there was no iatrogenic injury to the patient's teeth. PRACTICAL IMPLICATIONS: The Invisalign system may be a suitable orthodontic appliance for patients with DGI because clear aligners lessen the tensile stress to the teeth, decrease the number and area of bonds to the teeth, and offer protective effects through a full wrap of plastic that covers the crowns of the teeth.

A 10-year-old boy with class II oligodontia treated with buccal fixed appliances and agenesis space closure of the four second premolars: Case report No. 230075 - Titularisation Collège Européen Orthodontie (CEO), European College of Orthodontics.

The patient presented in this case report is a 10-year-old boy with hyperdivergent skeletal Class II associated with familial genetic agenesis of the second premolars. The treatment plan chosen was to close the spaces of agenesis using a bimaxillary appliance fixed buccally. The advantages and disadvantages of this treatment option were discussed. The result was stable and made it possible to avoid an implant-prosthetic solution, which would undoubtedly have been more restrictive over time.

Efficacy of clear aligner wear protocols in orthodontic tooth movement-a systematic review.

BACKGROUND AND OBJECTIVES: Different expedited aligner wear protocols are currently in practice. This review was undertaken to systematically appraise the available evidence on the comparative efficacy of orthodontic tooth movement (OTM) across the different wear protocols. SEARCH METHODS: Two assessors conducted comprehensive searches of electronic databases, including MEDLINE (via PubMed), Scopus, Embase, Web of Science, Google Scholar, Directory of Open Access Journals, Cochrane Library, OpenGrey, and Clinical Trial Registry, till 18 February 2024. Titles and abstracts were independently screened. SELECTION CRITERIA: Prospective or retrospective studies comparing expedited wear protocols with the conventional 14-day protocol were included. DATA COLLECTION AND ANALYSIS: A pre-piloted data extraction form was used. Risk of bias (RoB) assessment employed the Cochrane RoB 2.0 tool for randomized-controlled trials (RCTs) and the Newcastle-Ottawa scale for non-RCTs. The quality of evidence was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluation Pro tool. RESULTS: Six studies, including 3 RCTs and 3 non-RCTs, were selected from 9076 records. Four studies (two RCTs and two retrospective cohort) found no statistically significant difference (P > 0.05) in the OTM efficacy between expedited and conventional protocols. Two studies (one RCT and one prospective cohort) found greater efficacy (P < 0.05) with the 14-day protocol, with the RCT reporting greater efficacy for certain movements, such as maxillary posterior intrusion, maxillary posterior distal tipping and buccal torquing, and mandibular posterior intrusion and extrusion. One RCT reported statistically insignificant difference (P > 0.05) in pain perception between the 10-day and 14-day protocols. Two studies demonstrated low RoB, two moderate, and two high RoB. The evidence level was very-low for OTM efficacy and high for pain perception. Meta-analysis was precluded due to significant heterogeneity among the studies. CONCLUSIONS: Within the limitations of the study, the 7-day, 10-day, and 14-day protocols did not show any significant difference in OTM efficacy, except for certain movements that exhibited superior outcomes with the 14-day wear. Hence, a 'hybrid aligner-wear protocol', based on clinical judgement, might serve a better alternative in complex situations. REGISTRATION: PROSPERO CRD42021288179.

The biological effects of Piezocision™ on bone for accelerated tooth movement: A systematic review of animal studies.

OBJECTIVES: This systematic review aimed to assess the biological response at tissue, cellular, and molecular levels following Piezocision™ surgery, and its efficacy in accelerating orthodontic tooth movement. MATERIAL AND METHODS: A systematic review of the literature was conducted across 4 databases following the PRISMA guidelines up to May 2022. Prospective controlled animal studies involving healthy animals under active orthodontic treatment assisted by corticotomy performed with a piezotome (Piezocision™) published in the English language without time restrictions were included. The article selection, data extraction and risk of bias assessment (SYRCLE tool) were performed by two independent blinded review authors. RESULTS: Out of 738 articles screened, 10 studies were included with various level of bias. Biological responses were categorized into tissue, cellular, and molecular levels. Tissue-level changes included a global decrease in bone mineral content post-Piezocision™. At the cellular level, increased bone turnover activity was noted. Molecularly, elevated RANKL and OPG expression, along with increased TRAP+ and cytokines, were observed after Piezocision™. Studies confirmed Piezocision's efficacy, reporting 1.35 to 3.26 times faster tooth movements, peaking between the 3rd and 50th day post-surgery. Biological responses were transient, reversible, and proportional to surgical insult, with reactivation possible through a second Piezocision™. CONCLUSIONS: After Piezocision™ surgery, a transient and reversible biological response was described at the tissue, cellular and molecular levels, which induced faster orthodontic tooth movements. This biological response could be re-activated by an additional Piezocision™ and is proportional to the surgical injury. SYSTEMATIC REVIEW REGISTRATION: Prospero CRD42022303237.

Non-compliance treatment in a young adult full-step class II division 2 malocclusion with preadjusted lingual appliance and upper first molars extractions.

This case report describes a complex full-step class II case in a young adult patient treated with lingual straight-wire appliance and upper first molar extraction. As the patient refused a surgical treatment, she was offered the best possible camouflage with the double aim of obtaining an ideal occlusal relationship and maintaining the profile; appropriate biomechanical strategies, including extraction choice and anchorage control during space closure, were needed to achieve the planned results. This case report demonstrates the possibility of successfully resolving severe sagittal discrepancies in an adult patient without surgical treatment by means of a completely invisible non-compliance technique, with the extraction of the most compromised teeth. This report also underlines the need for careful planning during both diagnostic and treatment phases, in order to obtain the best results.

Class II subdivision treatment and stability with asymmetric Herbst appliance: A case report.

Non-surgical treatment of Class II subdivision may involve complex mechanics or asymmetric tooth extraction in its resolution. This report demonstrates the result and the short-term stability of Class II subdivision treated with asymmetrically installed Herbst appliance followed by conventional fixed orthodontic appliance. The approach allowed the correction of the unilateral Class II molar relationship and increased overjet, as well as the deviation of dental midlines, with improvement in lip posture and facial profile. The results remained stable two years after treatment, confirming the treatment success.

How well does Invisalign ClinCheck predict actual results: A prospective study.

INTRODUCTION: This study aimed to compare achieved movements with predicted movements after 28-week use of Invisalign Lite aligners. SETTINGS AND SAMPLE POPULATION: The digital impressions of 21 subjects treated with Invisalign Lite at a private practice and in the dental clinic (Milan, Italy) were taken and analysed. Subjects were Caucasian with a mean age of 20.1 years. METHODS: Patients were analysed at two time points: at T0, before starting therapy, and at T1, after 28 weeks of treatment with Invisalign clear aligners, with a 2-week change interval. The changes that occurred between T0 and T1 were compared to the predicted changes between T0 and Ts (setup/ClinCheck). Tooth movement performance was estimated through variables calculated as the difference between obtained and planned movements. RESULTS: In both maxillary and mandibular arches, the teeth that exhibited the least accurate expression of torque were the central incisors. Tip was not accurate on maxillary central incisors and canines, mandibular central incisors, lateral incisors, first premolars, second premolars and first molars. Rotations were under-expressed on maxillary lateral incisors, canines and second premolars and on mandibular central incisors, canines, first premolars, second premolars and first molars. The overall angular changes showed a tendency to underperformance. Transverse linear changes were accurate with a significant overperformance on maxillary and mandibular first molars. CONCLUSIONS: Torque correction of maxillary central incisors, as well as rotational correction of most of the teeth, showed significant differences between what was planned and what was obtained.

Histological Evaluation of the Effect of Alendronate on the Maxillary Bone of Wistar Rats Combined with Orthodontic Movement of Intense Force / Evaluación Histológica del Efecto del Alendronate en el Hueso Maxilar de Ratas Wistar Combinado con Movimiento de Ortodoncia de Fuerzas Intensas

SUMMARY: To evaluate the histological adverse effects of alendronate administered systemically and topically in combination with orthodontic movement by intense force. Thirty-six 24-week-old female Wistar rats, ovariectomized, were used and divided into three groups (n = 12/group): control, locally treated with saline (0.07 ml/kg/week) (group 1) and experimental, treated with alendronic acid systemically (0.07 mg/kg/week) (group 2) and locally (7 mg/kg/week) (group 3). At 14 days, an orthodontic anchor was installed in the right first molar, and a force of 144 cN was applied for 28 days. The samples were processed for histological evaluation. Descriptive statistics, Shapiro-Wilk tests, one-way ANOVA with Bonferroni correction, one-way repeated measures ANOVA and chi-square tests were performed. All tests were statistically significant at p <0.05. The adverse events found in all groups were inflammation and osteoclastic activity. In the bisphosphonate-treated groups, there were statistically significant differences (p = 0.005) in the osteoclastic activity between the two hemiarcates. All rats in group 2 presented paralytic ileus. Compared to local administration, systemic treatment with alendronic acid produces more adverse effects, such as inflammation, fibrinoid necrosis, and osteoclastic activity. During the application of intense forces, it was not possible to show that there is necrosis associated with bisphosphonates.

Evaluar los efectos adversos histológicos del alendronato administrado sistémica y tópicamente en combinación con movimientos ortodóncicos de fuerza intensa. Treinta y seis ratas Wistar hembras de 24 semanas de edad, ovariectomizadas, fueron utilizadas y divididas en tres grupos (n = 12/grupo): control, tratado localmente con solución salina (0,07 ml/kg/semana) (grupo 1) y experimental, tratados con ácido alendrónico por vía sistémica (0,07 mg/kg/semana) (grupo 2) y local (7 mg/kg/semana) (grupo 3). A los 14 días se instaló un anclaje de ortodoncia en el primer molar derecho y se aplicó una fuerza de 144 cN durante 28 días. Las muestras fueron procesadas para evaluación histológica. Se realizó estadística descriptiva, pruebas de Shapiro-Wilk, ANOVA de una vía con corrección de Bonferroni, ANOVA de medidas repetidas de una vía y pruebas de chi-cuadrado. Todas las pruebas fueron estadísticamente significativas con un p <0,05. Los eventos adversos encontrados en todos los grupos fueron inflamación y actividad osteoclástica. En los grupos tratados con bisfosfonatos hubo diferencias estadísticamente significativas (p = 0,005) en la actividad osteoclástica entre los dos hemiarcados. Todas las ratas del grupo 2 presentaron íleo paralítico. En comparación con la administración local, el tratamiento sistémico con ácido alendrónico produce más efectos adversos, como inflamación, necrosis fibrinoide y actividad osteoclástica. Durante la aplicación de fuerzas intensas, no fue posible demostrar que existe necrosis asociada con los bisfosfonatos.