Maternal residential exposure to solvents from industrial sources during pregnancy and childhood cancer risk in California.

BACKGROUND: Maternal solvent exposure has been suspected to increase offspring cancer risk. The study aimed to evaluate the associations between maternal residential exposure to solvents from industrial pollution during pregnancy and childhood cancer. METHODS: The present study included 15,744 cancer cases (aged 0-19 years at diagnosis) identified from California Cancer Registry and 283,141 controls randomly selected from California Birth Registry (20:1 frequency-matched by birth year: 1998-2016). We examined industrial releases of tetrachloroethylene and 1,1,1-trichloroethane within 3 km of the birth address, while we used a 5 km buffer for carbon disulfide. We calculated the total exposure from all linked Toxic Release Inventory sites during each index pregnancy and assigned "ever/never" and "high/low exposed/unexposed" exposure, using median values. We performed quadratic decay models to estimate cancer risks associated with maternal solvent exposure in pregnancy. RESULTS: 1,1,1-Trichloroethane was associated with rhabdomyosarcoma (adjusted Odds Ratio (aOR): 1.96; 95% Confidence Interval (CI): 1.16, 3.32) in the "ever exposed" group. Ever exposure to carbon disulfide was associated with increased risks of medulloblastoma (OR = 1.85, 95% CI 1.01, 3.40) and ependymoma (OR = 1.63, 95% CI 0.97, 2.74). CONCLUSIONS: Overall, our findings suggested maternal residential exposure to solvents from industrial sources might be associated with elevated childhood cancer risks.

Pilot tests for the optimization of the bioremediation strategy of a multi-layered aquifer at a multi-focus site impacted with chlorinated ethenes.

A multi-layered aquifer in an industrial area in the north of the Iberian Peninsula is severely contaminated with the chlorinated ethenes (CEs) tetrachloroethylene, trichloroethylene, cis-1,2-dichloroethylene, and vinyl chloride. Both shallow and deep aquifers are polluted, with two differentiated north and south CEs plumes. Hydrogeochemical and isotopic data (δ13C of CEs) evidenced natural attenuation of CEs. To select the optimal remediation strategy to clean-up the contamination plumes, laboratory treatability studies were performed, which confirmed the intrinsic biodegradation potential of the north and south shallow aquifers to fully dechlorinate CEs to ethene after injection of lactate, but also the combination of lactate and sulfidized mZVI as an alternative treatment for the north deep aquifer. In the lactate-amended microcosms, full dechlorination of CEs was accompanied by an increase in 16S rRNA gene copies of Dehalococcoides and Dehalogenimonas, and the tceA, vcrA and bvcA reductive dehalogenases. Three in situ pilot tests were implemented, which consisted in injections of lactate in the north and south shallow aquifers, and injections of lactate and sulfidized mZVI in the north deep aquifer. The hydrogeochemical, isotopic and molecular analyses used to monitor the pilot tests evidenced that results obtained mimicked the laboratory observations, albeit at different dechlorination rates. It is likely that the efficiency of the injections was affected by the amendment distribution. In addition, monitoring of the pilot tests in the shallow aquifers showed the release of CEs due to back diffusion from secondary sources, which limited the use of isotopic data for assessing treatment efficiency. In the pilot test that combined the injection of lactate and sulfidized mZVI, both biotic and abiotic pathways contributed to the production of ethene. This study demonstrates the usefulness of integrating different chemical, isotopic and biomolecular approaches for a more robust selection and implementation of optimal remediation strategies in CEs polluted sites.

Laboratory-scale characterization of slow-release permanganate gel (SRP-G) for the in-situ treatment of chlorinated-solvent groundwater plumes.

Significant challenges remain for the remediation of chlorinated-solvent plumes in groundwater, such as trichloroethene (TCE) and tetrachloroethene (PCE). A novel slow-release permanganate gel (SRP-G) technique may show promise for the in-situ treatment (remediation) of chlorinated contaminant plumes in groundwater. A series of laboratory experiments were conducted to characterize the primary physical factors that influence SRP-G gelation processes to optimize SRP-G performance for plume treatment. Specifically, experiments were conducted to quantify gel zeta potential, particle size distribution, and viscosity to determine SRP-G gelation characteristics and processes. These experiments tested various concentrations of two SRP-G amendment solutions (NaMnO4 and KMnO4) prepared with 30-wt.% and 50-wt.% colloidal silica to determine such influences on zeta potential, particle size distribution, and viscosity. The results of this study show that SRP-G solutions with low zeta potential and relatively high pH favor more rapid SRP-G gelation. The concomitant interaction of the predominantly negatively charged colloidal silica particles and the positively charged dissociated cations (Na+ and K+) in the SRP-G solution had the effect of stabilizing charge imbalance via attraction of particles and thereby inducing a greater influence on the gelation process. Gel particle size distribution and changes in viscosity had a significant influence on SRP-G solution gelation. The addition of permanganate (NaMnO4 or KMnO4) increased the average particle size distribution and the viscosity of the SRP-G solution and decreased the overall gelation time. SRP-G amendments (NaMnO4 or KMnO4) prepared with 50-wt.% colloidal silica showed more effective gelation (and reduced gelation time) compared to SRP-G amendments prepared with 30-wt.% colloidal silica. Under the conditions of these experiments, it was determined that both the 7-wt.% NaMnO4 solution and 90 mg/L KMnO4 solution using 50-wt.% colloidal silica would be the optimal injection SRP-G solution concentrations for this in-situ treatment technique.

[Determination of six halogenated solvent residues in olive oil by headspace gas chromatography].

The residual amount of halogenated solvents in olive oil is an important indicator of its quality. The National Olive Oil Quality Standard GB/T 23347-2021 states that the residual amount of individual halogenated solvents in olive oil should be ≤0.1 mg/kg and that the total residual amount of halogenated solvents should be ≤0.2 mg/kg. COI/T.20/Doc. No. 8-1990, which was published by the International Olive Council, describes the standard method used for the determination of halogenated solvents in olive oil. Unfortunately, this method is cumbersome, has poor repeatability and low automation, and is unsuitable for the detection and analysis of residual halogenated solvents in large quantities of olive oil. At present, no national standard method for determining residual halogenated solvents in olive oil is available in China. Thus, developing simple, efficient, accurate, and stable methods for the determination of residual halogenated solvents in olive oil is imperative. In this paper, a method based on automatic headspace gas chromatography was established for the determination of residual halogenated solvents, namely, chloroform, carbon tetrachloride, 1,1,1-trichloroethane, dibromochloromethane, tetrachloroethylene, and bromoform, in olive oil. The samples were processed as follows. After mixing, 2.00 g (accurate to 0.01 g) of the olive oil sample was added into a 20 mL headspace injection bottle and immediately sealed for headspace gas chromatography analysis. Blank virgin olive oil was used to prepare a standard working solution and the external standard method for quantification. The solvents used in the preparation of halogenated solvent standard intermediates were investigated and methanol was selected as a replacement for N,N-dimethylacetamide to prepare a halogenated solvent standard intermediate owing to its safety. The effects of different injection times (1, 2, 3, 4, 5, 6 s), equilibration temperatures (60, 70, 80, 90, 100, 110, 120 ℃), and equilibration times (4, 5, 8, 10, 20, 30, 40 min) of the headspace sampler on the detection of the residual amounts of the six halogenated solvents were investigated. The optimal injection time and equilibration temperature were 3 s and 90 ℃, respectively. The method demonstrated good analytical performance for the six halogenated solvents when the equilibration time was 30 min. A methodological study was conducted on the optimized method, and the results showed that the six halogenated solvents exhibited good linear relationships in the range of 0.002-0.200 mg/kg, with correlation coefficients of ≥0.9991. The limits of detection (LODs) and quantification (LOQs) of 1,1,1-trichloroethane and bromoform were 0.0006 and 0.002 mg/kg, respectively. The LODs and LOQs of chloroform, carbon tetrachloride, dibromochloromethane, and tetrachloroethylene were 0.0003 and 0.001 mg/kg, respectively. The average recoveries under different spiked levels were 85.53%-115.93%, and the relative standard deviations (n=6) were 1.11%-8.48%. The established method was used to analyze 13 olive oil samples available in the market. Although no halogenated solvents were detected in these samples, a limited number of samples does not represent all olive oils. Hence, monitoring residual halogenated solvents in olive oil remains necessary for its safe consumption. The LOQs of the method for the six halogenated solvents were significantly lower than that of the COI/T.20/Doc. No. 8-1990 standard method (0.02 mg/kg). In addition, the developed method can be conducted under short operation times with high precision and degree of automation as well as good accuracy. Thus, the proposed method is suitable for the determination and analysis of the residues of the six halogenated solvents in large batches of olive oil samples.

Assessing long-term ecological impacts of PCE contamination in groundwater using a flow cytometric fingerprint approach.

This study aims to develop and validate a comprehensive method for assessing ecological disturbances in groundwater ecosystems caused by tetrachloroethylene (PCE) contamination, utilizing flow cytometry (FCM) fingerprint approach. We hypothesized that the ecological disturbance resulting from PCE contamination would exhibit 'press disturbance', persisting over extended periods, and inducing notable phenotypic differences in the microbial community compared to undisturbed groundwater. We collected 40 groundwater samples from industrial district with a history of over twenty years of PCE contamination, along with 56 control groundwater from the national surveillance groundwater system. FCM revealed significant alterations in the phenotypic diversity of microbial communities in PCE-contaminated groundwater, particularly during the dry season. The presence of specific dechlorinating bacteria (Dehalococcoides, Dehalogenimonas, and Geobacter) and their syntrophic partners was identified as an indicator of contamination. Phenotypic diversity measures provided clearer and more direct reflections of contamination impact compared to taxonomic diversity measures. This study establishes FCM fingerprinting as a simple, robust, and accurate method for evaluating ecological disturbances, with potential applications in early warning systems and continuous monitoring of groundwater contamination. The findings not only underscore the sensitivity of FCM in detecting phenotypic variations induced by environmental stressors but also highlight its utility in understanding the complex dynamics of microbial communities in contaminated groundwater ecosystems.

[Characterization of Reductive Dechlorination of Chlorinated Ethylenes by Anaerobic Consortium].

Tetrachloroethylene （PCE） and trichloroethylene （TCE） are typical volatile halogenated organic compounds in groundwater that pose serious threats to the ecological environment and human health. To obtain an anaerobic microbial consortium capable of efficiently dechlorinating PCE and TCE to a non-toxic end product and to explore its potential in treating contaminated groundwater， an anaerobic microbial consortium W-1 that completely dechlorinated PCE and TCE to ethylene was obtained by repeatedly feeding PCE or TCE into the contaminated groundwater collected from an industrial site. The dechlorination rates of PCE and TCE were （120.1 ±4.9） µmol·ï¼ˆL·d）-1 and （172.4 ±21.8） µmol·ï¼ˆL·d）-1 in W-1， respectively. 16S rRNA gene amplicon sequencing and quantitative PCR （qPCR） showed that the relative abundance of Dehalobacter increased from 1.9% to 57.1%， with the gene copy number increasing by 1.7×107 copies per 1 µmol Cl- released when 98.3 µmol of PCE was dechlorinated to cis-1，2-dichloroethylene （cis-1，2-DCE）. The relative abundance of Dehalococcoides increased from 1.1% to 53.8% when cis-1，2-DCE was reductively dechlorinated to ethylene. The growth yield of Dehalococcoides gene copy number increased by 1.7×108 copies per 1 µmol Cl- released for the complete reductive dechlorination of PCE to ethylene. The results indicated that Dehalobacter and Dehalococcoides cooperated to completely detoxify PCE. When TCE was used as the only electron acceptor， the relative abundance of Dehalococcoides increased from （29.1 ±2.4）% to （7.7 ±0.2）%， and gene copy number increased by （1.9 ±0.4）×108 copies per 1 µmol Cl- released， after dechlorinating 222.8 µmol of TCE to ethylene. The 16S rRNA gene sequence of Dehalococcoides LWT1， the main functional dehalogenating bacterium in enrichment culture W-1， was obtained using PCR and Sanger sequencing， and it showed 100% similarity with the 16S rRNA gene sequence of D. mccartyi strain 195. The anaerobic microbial consortium W-1 was also bioaugmented into the groundwater contaminated by TCE at a concentration of 418.7 µmol·L-1. The results showed that （69.2 ±9.8）% of TCE could be completely detoxified to ethylene within 28 days with a dechlorination rate of （10.3 ±1.5） µmol·ï¼ˆL·d）-1. This study can provide the microbial resource and theoretical guidance for the anaerobic microbial remediation in PCE or TCE-contaminated groundwater.

Assessment of the mode of action of perchloroethylene-induced mouse liver tumors.

Perchloroethylene (PCE) is used as a solvent and chemical intermediate. Following chronic inhalation exposure, PCE selectively induced liver tumors in mice. Understanding the mode of action (MOA) for PCE carcinogenesis in mice is important in defining its possible human cancer risk. The proposed MOA is based on the extensive examination of the peer-reviewed studies that have assessed the mouse liver effects of PCE and its major oxidative metabolite trichloroacetic acid (TCA). Similar to PCE, TCA has also been demonstrated to liver tumors selectively in mice following chronic exposure. The Key Events (KE) of the proposed PCE MOA involve oxidative metabolism of PCE to TCA [KE 1]; activation of the peroxisome proliferator-activated receptor alpha (PPARα) [KE 2]; alteration in hepatic gene expression including cell growth pathways [KE 3]; increase in cell proliferation [KE 4]; selective clonal expansion of hepatic preneoplastic foci [KE 5]; and formation of hepatic neoplasms [KE 6]. The scientific evidence supporting the PPARα MOA for PCE is strong and satisfies the requirements for a MOA analysis. The PPARα liver tumor MOA in rodents has been demonstrated not to occur in humans; thus, human liver cancer risk to PCE is not likely.

[Determination of Perchloroethylene in blood by headspace gas chromatography-mass spectrometry].

Objective: To establish a method for determination of Perchloroethylene (PCE) in blood by headspace gas chromatography-mass spectrometry (HS/GC-MS) . Methods: From Dctober to December 2021, A total of 3 mL blood samples were taken into a 10 mL headspace bottle, after heated at 60 ℃ for 30 mins, PCE in the top air was separated by VF-WAXms capillary column and detected by GC-MS. The retention time and external standard method were used for qualitative and quantitative analysis of PCE in samples, respectively. Results: There was good linear relationship in the range of 5.09-200.17 µg/L. The linear correlation coefficient was 0.9993.The detection limit was 0.21 µg/L and the lower limit of quantitation was 0.70 µg/L. The recovery rates of samples with different concentrations were 95.3%-103.8%. The intra-batch relative standard deviations (RSD) were 3.2%-4.6%, and inter-batch RSD was 4.0%-6.1%. The samples can be stored at 4 ℃ for three days and at -20 ℃ for seven days. Conclusion: This method is proved to be simple, practical and highly sensitive, which is suitable for the determination of PCE in blood.

Enhanced air sparging for groundwater remediation using alginate gel-based removable hydraulic barriers.

The objective of this study was to investigate the effect of a removable physical barrier on the air sparging performance using a lab-scale aquifer model was investigated. The barrier was installed in water-saturated porous media, prior to the air sparging, by injecting calcium chloride aqueous solution into the aquifer with pre-applied alginate solution. Changes in the air flow direction and air flux at the media surface during air sparging were evaluated. With a hydrogel barrier set at the center of the media, the airflow detoured the barrier resulting in a bimodal air flux distribution at the media surface. While employing two gel-formed barriers positioned away from the media's center, the airflow concentrated specifically on the gap between the barriers. The hydrogel was successfully removed using a sodium bicarbonate solution (1.0 mol/L). Using the hydrogel barrier, the performance of air sparging was significantly enhanced for removing contaminants [tetrachloroethene (PCE) and n-hexane mixture] due to increased air flux; 9.8% of PCE applied (7.8 g) was removed during 120 min air sprging for the gel barrier system whereas no PCE was removed for the control. Alginate gel did not show significant sorption capacity for PCE. It was stable in the contaminant up to 68 days with reasonable loss of its mass. Findings of this study present a promising option for air sparging process specifically targeting the contaminant source zone in the aquifer.

Oxidative stress and pro-inflammatory cytokines following perchloroethylene exposure in young female dry-cleaning workers.

BACKGROUND: The involvement of Perchloroethylene (PCE) in the development of autoimmune diseases has been reported. However, few studies investigated immunotoxicity in PCE-exposed workers. OBJECTIVE: To study changes in the oxidative stress and cytokine profile of young female dry-cleaning workers exposed to PCE. METHODS: Thirty-eight exposed workers and 38 unexposed controls were recruited. All the participants were young nonsmoker females. Individual interviews were conducted by a physician. Blood samples were collected and hematological tests were performed by an automated Coulter Counter. Plasma PCE levels were determined using gas chromatography/flame ionization detection. Plasma total antioxidant capacity (TAC), Catalase (CAT), Superoxide dismutase (SOD), and Malondialdehyde (MDA) levels were measured using the colorimetric method. The levels of plasma cytokines interleukin-1ß (IL-1ß), IL-2, IL-4, IL-6, IL-8, tumor necrosis factor-α (TNF-α) and interferon-γ (IFN-γ) were measured by commercially kits. RESULTS: The levels of plasma PCE averaged 561±96 ng/ml in the exposed group compared with 1.3±0.5 ng/ml in the controls. The hematological tests failed to find abnormalities in the exposed workers. Exposed workers presented significantly increased plasma levels of MDA, SOD and CAT. There were no significant differences between the two groups for level of plasma TAC. Significantly increased plasma IL-1ß and TNF-α and decreased IL-2 and IL-8 levels were seen in the exposed workers. There were no significant differences between the two groups for IL-4, IL-6, and IFN-γ. CONCLUSION: PCE exposure resulted in changed cytokine profile in dry-cleaning workers, suggesting the potential immunotoxicity of PCE at low exposure levels.

Biodegradation of chloroethene compounds under microoxic conditions.

The biodegradation of chloroethene compounds under oxic and anoxic conditions is well established. However, the biological reactions that take place under microoxic conditions are unknown. Here, we report the biostimulated (BIOST: addition of lactate) and natural attenuated (NAT) degradation of chloroethene compounds under microoxic conditions by bacterial communities from chloroethene compounds-contaminated groundwater. The degradation of tetrachloroethene was significantly higher in NAT (15.14% on average) than in BIOST (10.13% on average) conditions at the end of the experiment (90 days). Sporomusa, Paracoccus, Sedimentibacter, Pseudomonas, and Desulfosporosinus were overrepresented in NAT and BIOST compared to the source groundwater. The NAT metagenome contains phenol hydrolase P1 oxygenase (dmpL), catechol-1,2-dioxygenase (catA), catechol-2,3-dioxygenases (dmpB, todE, and xylE) genes, which could be involved in the cometabolic degradation of chloroethene compounds; and chlorate reductase (clrA), that could be associated with partial reductive dechlorination of chloroethene compounds. Our data provide a better understanding of the bacterial communities, genes, and pathways potentially implicated in the reductive and cometabolic degradation of chloroethene compounds under microoxic conditions.

Occupational exposures and cancer risk in commercial laundry and dry cleaning industries: a scoping review.

BACKGROUND: The laundry and dry cleaning industries are critical for maintaining cleanliness and hygiene in our daily lives. However, they have also been identified as sources of hazardous chemical exposure for workers, leading to potentially severe health implications. Despite mounting evidence that solvents like perchloroethylene and trichloroethylene are carcinogenic, they remain commonly used in the industry. Additionally, while alternative solvents are increasingly being utilized in response to indications of adverse health and environmental effects, there remains a significant gap in our understanding of the potential risks associated with exposure to these new agents. METHODS: This study aims to identify gaps in the literature concerning worker exposure to contemporary toxic chemicals in the laundry and dry cleaning industry and their associated carcinogenic risks. A scoping review of peer-reviewed publications from 2012 to 2022 was conducted to achieve this objective, focusing on studies that detailed chemical exposures, sampling methods, and workers within the laundry and dry cleaning sector. RESULTS: In this scoping review, 12 relevant papers were assessed. A majority (66%) examined perchloroethylene exposure, with one notable finding revealing that biomarkers from dry cleaners had significant micronuclei frequency and DNA damage, even when exposed to PCE at levels below occupational exposure limits. Similarly, another study supported these results, finding an increase in early DNA damage among exposed workers. Separate studies on TCE and benzene presented varied exposure levels and health risks, raising concern due to their IARC Group 1 carcinogen classification. Information on alternative solvents was limited, highlighting gaps in health outcome data, exposure guidelines, and carcinogenic classifications. CONCLUSION: Research on health outcomes, specifically carcinogenicity from solvent exposure in dry cleaning, is limited, with 66% of studies not monitoring health implications, particularly for emerging solvents. Further, findings indicated potential DNA damage from perchloroethylene, even below set occupational limits, emphasizing the need to reevaluate safety limits. As alternative solvents like butylal and high-flashpoint hydrocarbons become more prevalent, investigations into the effects of their exposure are necessary to safeguard workers' health. This scoping review is registered with the Open Science Framework, registration DOI: https://doi.org/10.17605/OSF.IO/Q8FR3 .

[Study on formulation of standard limits for trichloroethylene and tetrachloroethylene in "Standards for indoor air quality（GB/T 18883-2022）" in China].

There are clear indoor air pollution sources of trichloroethylene and tetrachloroethylene. A large number of epidemiological evidence has confirmed their carcinogenic toxicity and non-carcinogenic toxicity. Several countries and international organizations have paid attention to indoor air trichloroethylene and tetrachloroethylene. It has been also assessed that there should be certain potential health risk of indoor air trichloroethylene and tetrachloroethylene in China. Based on the latest research results of health risk assessment of indoor air trichloroethylene and tetrachloroethylene, the "Standards for indoor air quality (GB/T 18883-2022)" added trichloroethylene and tetrachloroethylene as indicators. The index limit of trichloroethylene is 6 µg/m3 for an 8-hour average concentration. The index limit of tetrachloroethylene is 120 µg/m3 for an 8-hour average concentration. The technical contents related to the determination of the standard limits of trichloroethylene and tetrachloroethylene in indoor air were analyzed and discussed, including the sources, the exposure, the health effects, the determination of the limit values, and the recommendations for standard implementation. It also proposed recommendations for the implementation of"Standards for indoor air quality (GB/T 18883-2022)".

The passive sampler assisted human exposure risk characterization for tetrachloroethene soil vapor intrusion scenario.

The potential human health risks associated with soil vapor intrusion and volatile organic compounds (VOCs) exposure were characterized at an industrialized site by the quantification of gaseous VOCs in soil pores using a passive sampling technique. The gaseous tetrachloroethene (PCE) in soil pores varied between 12 and 5,400 µg m-3 showing 3 orders of magnitude variation with dependence on groundwater PCE concentrations. Though the PCE concentration in the air only varied between 0.45 and 1.5 µg m-3 showing negligible variations compared to the variation observed in soil pores. The PCE concentration in the air varied between 0.45 and 1.5 µg m-3. The calculation of fugacity suggested that the PCE in the test site originated from groundwater. Measured PCE in groundwater ranged from 14 to 2,400 times higher than PCE in soil gas. This indicates that conducting a vapor intrusion risk assessment using passive soil gas sampling is critical for accurate risk characterization and assessment. Estimated PCE inhalation cancer risks for street cleaners and indoor residents varied between 10-6 and 10-4 with a low plausible hazard, and between 10-3 and 10-2 with a high risk, respectively. The results of this study demonstrate that passive sampling offers a significantly lower cost and labor-intensive approach compared to traditional methods for assessing pollution distribution in contaminated sites and characterizing risks. This highlights the potential for wider application of passive sampling techniques in environmental studies.

Significance of temperature as a key driver in ZVI PRB applications for PCE degradation.

We report on the potential of elevated groundwater temperatures and zero-valent iron permeable reactive barriers (ZVI PRBs), for example, through a combination with underground thermal energy storage (UTES), to achieve enhanced remediation of chlorinated hydrocarbon (CHC) contaminated groundwater. Building on earlier findings concerning deionized solutions, we created a database for mineralized groundwater based on temperature dependence of tetrachloroethylene (PCE) degradation using two popular ZVIs (i.e., Gotthart-Maier cast iron [GM] and ISPAT sponge iron [IS]) in column experiments at 25 °C-70 °C to establish a temperature-dependent ZVI PRB dimensioning approach. Scenario analysis revealed that a heated ZVI PRB system in a moderate temperature range up to 40 °C showed the greatest efficiency, with potential material savings of ~55% to 75%, compared to 10 °C, considering manageability and longevity. With a 25 °C-70 °C temperature increase, rate coefficients of PCE degradation increased from 0.4 ± 0.0 h-1 to 2.9 ± 2.2 h-1 (GM) and 0.1 ± 0.1 h-1 to 1.8 ± 0.0 h-1 (IS), while TCE rate coefficients increased from 0.6 ± 0.1 h-1 to 5.1 ± 3.9 h-1 at GM. Activation energies for PCE degradation yielded 32 kJ mol-1 (GM) and 56 kJ mol-1 (IS). Temperature-dependent anaerobic iron corrosion was key in regulating mineral precipitation and passivation of the iron surface as well as porosity reduction due to gas production.

Levels, Distributions, and Potential Risks of Hexachlorobutadiene from Two Tetrachloroethylene Factories in China.

A systematic investigation was conducted on the emission of hexachlorobutadiene (HCBD) from two tetrachloroethylene factories that used the acetylene method (F1) and the tetrachloride transformation method (F2). The levels of HCBD in the air for F1 were found to be in the range of 1.46-1170 µg/m3, whereas F2 had levels in the range of 1.96-5530 µg/m3. Similarly, the levels of HCBD in the soil for F1 were found to be in the range from 42.2 to 140 µg/kg, whereas F2 had levels in the range from 4.13 to 2180 µg/kg. Samples obtained from the air, soil, and sludge in the reaction area of the tetrachloroethylene factories in China showed high levels of HCBD. The F1 method unintentionally produced more HCBD than the F2 method during tetrachloroethylene production, leading to greater harm. The results of the risk assessment suggested the presence of harmful health effects on workers in the workplace. The investigation findings highlight the need for improved management systems to ensure the safe production of tetrachloroethylene.

[Method for the determination of tetrachloromethane, trichloroethane, 1,1,2-trichloroethane, and tetrachloroethene in the air at workplaces]. / Metoda oznaczania tetrachlorometanu, trichloroetenu, 1,1,2-trichloroetanu i tetrachloroetenu w powietrzu na stanowiskach pracy.

BACKGROUND: Chemical substances from the halogenated aliphatic hydrocarbons group are used in industry, e.g., as intermediates in syntheses, auxiliaries, solvents in degreasing processes, and laboratory tests. Due to their harmful effects on human health and the environment, their use is often banned or limited to certain industrial uses only. MATERIAL AND METHODS: A sorbent tube containing 2 layers (100/50 mg) of coconut shell charcoal was used as a sampler for air sampling. Gas chromatography-mass spectrometry technique and the use of HP-5MS column (30 m × 0.25 mm × 0.25 µm), an oven temperature ramp program from 40°C to 250°C and selected ion monitoring mode were chosen for the determination. RESULTS: The established chromatographic conditions enable the simultaneous determination of tetrachloromethane, trichlorethane, 1,1,2-trichloroethane and tetrachloroethene in the concentration range 2-100 µg/ml. The average desorption coefficients obtained were: 0.97 for tetrachloromethane, 0.96 for trichloroethene, 0.96 for 1,1,2-trichloroethane and 0.96 for tetrachloroethene. CONCLUSIONS: The calculation of the substance concentration in the analyzed air requires the determination of the amount of substances trapped by the sorbent tube, the desorption coefficient and the air sample volume. Adequate dilution of the extract makes it possible to determine tetrachloromethane, trichloroethene, 1,1,2-trichloroethane and tetrachloroethene in ranges corresponding to 0.1-2 times the maximum admissible concentrations in the workplace air. This article discusses the issues occupational safety and health, which are the subject matter of health sciences and environmental engineering research. Med Pr. 2023;74(1):53-62.

Mobilization pilot test of PCE sources in the transition zone to aquitards by combining mZVI and biostimulation with lactic acid.

The potential toxic and carcinogenic effects of chlorinated solvents in groundwater on human health and aquatic ecosystems require very effective remediation strategies of contaminated groundwater to achieve the low legal cleanup targets required. The transition zones between aquifers and bottom aquitards occur mainly in prograding alluvial fan geological contexts. Hence, they are very frequent from a hydrogeological point of view. The transition zone consists of numerous thin layers of fine to coarse-grained clastic fragments (e.g., medium sands and gravels), which alternate with fine-grained materials (clays and silts). When the transition zones are affected by DNAPL spills, free-phase pools accumulate on the less conductive layers. Owing to the low overall conductivity of this zone, the pools are very recalcitrant. Little field research has been done on transition zone remediation techniques. Injection of iron microparticles has the disadvantage of the limited accessibility of this reagent to reach the entire source of contamination. Biostimulation of indigenous microorganisms in the medium has the disadvantage that few of the microorganisms are capable of complete biodegradation to total mineralization of the parent contaminant and metabolites. A field pilot test was conducted at a site where a transition zone existed in which DNAPL pools of PCE had accumulated. In particular, the interface with the bottom aquitard was where PCE concentrations were the highest. In this pilot test, a combined strategy using ZVI in microparticles and biostimulation with lactate in the form of lactic acid was conducted. Throughout the test it was found that the interdependence of the coupled biotic and abiotic processes generated synergies between these processes. This resulted in a greater degradation of the PCE and its transformation products. With the combination of the two techniques, the mobilization of the contaminant source of PCE was extremely effective.

Resuscitation-Promoting Factor Accelerates Enrichment of Highly Active Tetrachloroethene/Polychlorinated Biphenyl-Dechlorinating Cultures.

The anaerobic bioremediation of polychlorinated biphenyls (PCBs) is largely impeded by difficulties in massively enriching PCB dechlorinators in short periods of time. Tetrachloroethene (PCE) is often utilized as an alternative electron acceptor to preenrich PCB-dechlorinating bacteria. In this study, resuscitation promoting factor (Rpf) was used as an additive to enhance the enrichment of the microbial communities involved in PCE/PCBs dechlorination. The results indicated that Rpf accelerates PCE dechlorination 3.8 to 5.4 times faster than control cultures. In Aroclor 1260-fed cultures, the amendment of Rpf enables significantly more rapid and extensive dechlorination of PCBs. The residual high-chlorinated PCB congeners (≥5 Cl atoms) accounted for 36.7% and 59.8% in the Rpf-amended cultures and in the corresponding controls, respectively. This improvement was mainly attributed to the enhanced activity of the removal of meta-chlorines (47.7 mol % versus 14.7 mol %), which did not appear to affect dechlorination pathways. The dechlorinators, including Dehalococcoides in Chloroflexi and Desulfitobacterium in Firmicutes, were greatly enriched via Rpf amendment. The abundance of nondechlorinating populations, including Methanosarcina, Desulfovibrio, and Bacteroides, was also greatly enhanced via Rpf amendment. These results suggest that Rpf serves as an effective additive for the rapid enrichment of active dechlorinating cultures so as to provide a new approach by which to massively cultivate bioinoculants for accelerated in situ anaerobic bioremediation. IMPORTANCE The resuscitation promoting factor (Rpf) of Micrococcus luteus has been reported to resuscitate and stimulate the growth of functional microorganisms that are involved in the aerobic degradation of polychlorinated biphenyls (PCBs). However, few studies have been conducted to investigate the role of Rpf on anaerobic microbial populations. In this study, the enhancement of Rpf on the anaerobic microbial dechlorination of PCE/PCBs was discovered. Additionally, the Rpf-responsive populations underlying the enhanced dechlorination were uncovered. This report reveals the rapid enrichment of active dechlorinating cultures via Rpf amendment, and this sheds light on massively enriching PCB dechlorinators in short periods of time. The enhanced in situ anaerobic bioremediation of PCBs could be expected by supplementing Rpf.