Biomechanical evaluation of reinsertion and revision screws in the subaxial cervical vertebrae.

BACKGROUND: This study aimed to evaluate the biomechanical effects of reinserted or revised subaxial cervical vertebral screws. METHODS: The first part aimed to gauge the maximum insertional torque (MIT) of 30 subaxial cervical vertebrae outfitted with 4.0-mm titanium screws. A reinsertion group was created wherein a screw was wholly removed and replaced along the same trajectory to test its maximum pullout strength (MPOS). A control group was also implemented. The second part involved implanting 4.0-mm titanium screws into 20 subaxial cervical vertebrae, testing them to failure, and then reinserting 4.5-mm revision screws along the same path to determine and compare the MIT and MPOS between the test and revision groups. RESULTS: Part I findings: No significant difference was observed in the initial insertion's maximum insertion torque (MIT) and maximum pull-out strength (MPOS) between the control and reinsertion groups. However, the MIT of the reinsertion group was substantially decreased compared to the first insertion. Moderate to high correlations were observed between the MIT and MPOS in both groups, as well as between the MIT of the first and second screw in the reinsertion group. Part II, the MIT and MPOS of the screw in the test group showed a strong correlation, while a modest correlation was observed for the revision screw used in failed cervical vertebrae screw. Additionally, the MPOS of the screw in the test group was significantly higher than that of the revision screw group. CONCLUSION: This study suggests that reinsertion of subaxial cervical vertebrae screws along the same trajectory is a viable option that does not significantly affect fixation stability. However, the use of 4.5-mm revision screws is inadequate for failed fixation cases with 4.0-mm cervical vertebral screws.

Machine learning models on a web application to predict short-term postoperative outcomes following anterior cervical discectomy and fusion.

BACKGROUND: The frequency of anterior cervical discectomy and fusion (ACDF) has increased up to 400% since 2011, underscoring the need to preoperatively anticipate adverse postoperative outcomes given the procedure's expanding use. Our study aims to accomplish two goals: firstly, to develop a suite of explainable machine learning (ML) models capable of predicting adverse postoperative outcomes following ACDF surgery, and secondly, to embed these models in a user-friendly web application, demonstrating their potential utility. METHODS: We utilized data from the National Surgical Quality Improvement Program database to identify patients who underwent ACDF surgery. The outcomes of interest were four short-term postoperative adverse outcomes: prolonged length of stay (LOS), non-home discharges, 30-day readmissions, and major complications. We utilized five ML algorithms - TabPFN, TabNET, XGBoost, LightGBM, and Random Forest - coupled with the Optuna optimization library for hyperparameter tuning. To bolster the interpretability of our models, we employed SHapley Additive exPlanations (SHAP) for evaluating predictor variables' relative importance and used partial dependence plots to illustrate the impact of individual variables on the predictions generated by our top-performing models. We visualized model performance using receiver operating characteristic (ROC) curves and precision-recall curves (PRC). Quantitative metrics calculated were the area under the ROC curve (AUROC), balanced accuracy, weighted area under the PRC (AUPRC), weighted precision, and weighted recall. Models with the highest AUROC values were selected for inclusion in a web application. RESULTS: The analysis included 57,760 patients for prolonged LOS [11.1% with prolonged LOS], 57,780 for non-home discharges [3.3% non-home discharges], 57,790 for 30-day readmissions [2.9% readmitted], and 57,800 for major complications [1.4% with major complications]. The top-performing models, which were the ones built with the Random Forest algorithm, yielded mean AUROCs of 0.776, 0.846, 0.775, and 0.747 for predicting prolonged LOS, non-home discharges, readmissions, and complications, respectively. CONCLUSIONS: Our study employs advanced ML methodologies to enhance the prediction of adverse postoperative outcomes following ACDF. We designed an accessible web application to integrate these models into clinical practice. Our findings affirm that ML tools serve as vital supplements in risk stratification, facilitating the prediction of diverse outcomes and enhancing patient counseling for ACDF.

Comparison of the Outcomes of Anterior Cervical Discectomy and Fusion and Cervical Disc Replacement for Cervical Disc Disease.

OBJECTIVE: To compare the radiological outcome and development of heterotopic ossification (HO) following single-segment anterior cervical discectomy and fusion (ACDF) and cervical disc replacement (CDR) for cervical disc herniation and evaluate their impact on surgical success. STUDY DESIGN: Descriptive comparative study. Place and Duration of the Study: Neurosurgery Department at Bozyaka Education and Research Hospital, Izmir, Turkiye, between January 2020 and June 2022. METHODOLOGY: Patients aged 18-70 years with radicular neck pain unresponsive to conventional medical treatment and an MRI-confirmed diagnosis were included. Patients with osteoporosis (OP) were excluded. Patients were randomised into two treatment groups (ACDF and CDR) and stratified by age and symptom severity. Radiographic assessments and HO classification according to McAfee were performed. RESULTS: Among the included patients, 56 underwent ACDF and 45 underwent CDR. The mean patient age was 48.29 ± 9.530 and 41.84 ± 7.239 years in the ACDF and CDR groups, respectively (p <0.001). The postoperative disc height increased in both groups. The T1 slope was significantly higher preoperatively and in the early postoperative period in the CDR group than in the ACDF group (p = 0.001). HO was graded as 1, 2, 3, and 4 in 28 (27.7%), 6 (5.9%), 7 (6.9%), and 4 (3%) patients, respectively. CONCLUSION: ACDF and CDR provided similar improvements in radiological measurements and pain relief. Although both procedures significantly enhanced the patient's quality of life and disability scores, HO was more prevalent following CDR during long-term follow-up. KEY WORDS: Cervical disc replacement, Anterior cervical discectomy and fusion, Spinal surgery techniques, Heterotopic ossification.

Relationship between intervertebral disc height and post operative dysphagia secondary to single-level anterior cervical discectomy and fusion- a retrospective study.

BACKGROUND: One goal of Anterior Cervical Discectomy and Fusion (ACDF) is to restore the loss of intervertebral disc height (IDH) results from the degenerative process. However, the effects of IDH on postoperative dysphagia after ACDF remain unclear. METHODS: Based on the results of a one-year telephone follow-up, A total of 217 consecutive patients after single-level ACDF were enrolled. They were divided into dysphagia and non-dysphagia groups. The age, BMI, operation time and blood loss of all patients were collected from the medical record system and compared between patients with and without dysphagia. Radiologically, IDH, spinous process distance (SP) of the operated segment, and C2-7 angle (C2-7 A) were measured preoperatively and postoperatively. The relationship between changes in these radiological parameters and the development of dysphagia was analyzed. RESULTS: Sixty-three (29%) cases exhibited postoperative dysphagia. The mean changes in IDH, SP, and C2-7 A were 2.84 mm, -1.54 mm, and 4.82 degrees, respectively. Changes in IDH (P = 0.001) and changes in C2-7 A (P = 0.000) showed significant differences between dysphagia and non-dysphagia patients. Increased IDH and increased C2-7 A (P = 0.037 and 0.003, respectively) significantly and independently influenced the incidence of postoperative dysphagia. When the change in IDH was ≥ 3 mm, the chance of developing postoperative dysphagia for this patient was significantly greater. No significant relationship was observed between the change in spinous process distance (SP) and the incidence of dysphagia. The age, BMI, operation time and blood loss did not significantly influence the incidence of postoperative dysphagia. CONCLUSION: The change in IDH could be regarded as a predictive factor for postoperative dysphagia after single-level ACDF.

Structure-sparing resection for the management of cervical chordomas: a retrospective institutional series.

OBJECTIVE: Chordomas are a rare and relatively slow-growing malignancy of notochordal origin with a nearly 50% recurrence rate. Chordomas of the cervical spine are particularly challenging tumors given surrounding vital anatomical structures. Although standard in other areas of the spine, en bloc resection of cervical chordomas is exceedingly difficult and carries the risk of significant postoperative morbidity. Here, the authors present their institutional experience with 13 patients treated with a structure-sparing radical resection and adjuvant radiation for cervical chordomas. METHODS: Records of the standing senior author and institutional database of spinal surgeries were retrospectively reviewed for surgically managed cervical and high thoracic chordomas between 1997 and 2022. Chordomas whose epicenter was cervical but touched the clivus or had extension to the thoracic spine were included in this series. Clinical and operative data were gathered and analyzed for the index surgery and any revisions needed. Outcome metrics such as recurrence rates, complication rates, functional status, progression-free interval (PFI) and overall survival (OS) were evaluated. RESULTS: The median patient age at diagnosis was 57 (range 32-80) years. The median modified Rankin Scale (mRS) score at the time of presentation was 1 (range 0-4). Approximately 40% of tumors were located in the upper cervical spine (occiput-C2). The median time from diagnosis to surgery was 74.5 (range 10-483) days. Gross-total resection was achieved in just under 40% of patients. All patients received adjuvant radiotherapy. The mean duration of follow-up was 4.09 years, with a mean PFI of 3.80 (range 1.16-13.1) years. Five patients experienced recurrence (38.5%). The mean OS was 3.44 years. Three patients died during the follow-up period; 2 due to disease progression and 1 died in the immediate postoperative period. One patient was lost to follow-up. A significant positive relationship was identified between high cervical tumor location and disease recurrence (p = 0.021). CONCLUSIONS: While en bloc resection is appropriate and feasible for tumors in the sacral spine, the cervical region poses a significant technical challenge and is associated with increased postoperative morbidity. Radical resection may allow for achievement of negative operative margins and, along with sparing postoperative morbidity following resection of cervical chordomas, maintaining a similar rate of recurrence when compared with en bloc resection while preserving quality of life.

Comparative Analysis of Postoperative Sagittal Balance in Expansive Open-Door Laminoplasty versus Laminectomy with Fusion for Multilevel Ossification of Posterior Longitudinal Ligament: A Retrospective Study.

BACKGROUND This single-center study included 80 patients with multilevel cervical ossification of the posterior longitudinal ligament (OPLL) and aimed to compare postoperative sagittal balance following treatment with expansive open-door laminoplasty (LP) vs total laminectomy with fusion (LF). MATERIAL AND METHODS Data of 80 patients with multilevel OPLL treated with LP vs LF between January 2017 and January 2022 were retrospectively analyzed. The basic data, cervical sagittal parameters, and clinical outcomes of the patients were counted in the preoperative and postoperative periods, and complications were recorded. Forty patients underwent LP and 40 underwent LF. Cervical sagittal parameters were compared between and within the 2 groups. Clinical outcomes and complications were compared between the 2 groups. RESULTS At last follow-up, the postoperative C2-C7 Cobb angel, T1 slope (T1S), and C7 slope (C7S) were significantly higher in the LF group than in the LP group (P<0.001). C2-C7 SVA (cSVA) was slightly higher in the LF group (P>0.05) and significantly higher in the LP group (P<0.05). The incidence of postoperative complications in the LP group was significantly lower than in the LF group (P=0.02). The postoperative scores on the Visual Analog Scale (VAS), Neck Disability Index (NDI), and Japanese Orthopedic Association (JOA) were significantly improved in both groups (P<0.001). CONCLUSIONS Both procedures had good outcomes in neurological improvement. After posterior surgery, the cervical vertebrae all showed a tilting forward. Compared to LP, LF may change cervical balance in Cobb angel, T1S. LF has better efficacy in improving cervical lordosis compared with LP. Patients with high T1 slope after surgery may has more axial pain.

How does cervical sagittal profile change after the spontaneous compensation of global sagittal imbalance following one- or two-level lumbar fusion.

PURPOSE: This study aimed to evaluate the cervical sagittal profile after the spontaneous compensation of global sagittal imbalance and analyze the associations between the changes in cervical sagittal alignment and spinopelvic parameters. METHODS: In this retrospective radiographic study, we analyzed 90 patients with degenerative lumbar stenosis (DLS) and sagittal imbalance who underwent short lumbar fusion (imbalance group). We used 60 patients with DLS and sagittal balance as the control group (balance group). Patients in the imbalance group were also divided into two groups according to the preoperative PI: low PI group (≤ 50°), high PI group (PI > 50°). We measured the spinal sagittal alignment parameters on the long-cassette standing lateral radiographs of the whole spine. We compared the changes of spinal sagittal parameters between pre-operation and post-operation. We observed the relationships between the changes in cervical profile and spinopelvic parameters. RESULTS: Sagittal vertical axis (SVA) occurred spontaneous compensation (p = 0.000) and significant changes were observed in cervical lordosis (CL) (p = 0.000) and cervical sagittal vertical axis (cSVA) (p = 0.023) after surgery in the imbalance group. However, there were no significant differences in the radiographic parameters from pre-operation to post-operation in the balance group. The variations in CL were correlated with the variations in SVA (R = 0.307, p = 0.041). The variations in cSVA were correlated with the variations in SVA (R=-0.470, p = 0.001). CONCLUSION: Cervical sagittal profile would have compensatory changes after short lumbar fusion. The spontaneous decrease in CL would occur in patients with DLS after the spontaneous compensation of global sagittal imbalance following one- or two-level lumbar fusion. The changes of cervical sagittal profile were related to the extent of the spontaneous compensation of SVA.

MRI Vertebral Bone Quality Correlates With Interbody Cage Subsidence After Anterior Cervical Discectomy and Fusion.

STUDY DESIGN: Retrospective observational study of consecutive patients. OBJECTIVE: The purpose of the study was to evaluate VBQ as a predictor of interbody subsidence and to determine threshold values that portend increased risk of subsidence. SUMMARY OF BACKGROUND DATA: Many risk factors have been reported for the subsidence of interbody cages in anterior cervical discectomy and fusion (ACDF). MRI Vertebral Bone Quality (VQB) is a relatively new radiographic parameter that can be easily obtained from preoperative MRI and has been shown to correlate with measurements of bone density such as DXA and CT Hounsfield Units. METHODS: All patients who underwent 1- to 3-level ACDF using titanium interbodies with anterior plating between the years 2018 and 2020 at our tertiary referral center were included. Subsidence measurements were performed by 2 independent reviewers on CT scans obtained 6 months postoperatively. VBQ was measured on pre-operative sagittal T1 MRI by 2 independent reviewers, and values were averaged. RESULTS: Eight-five fusion levels in 44 patients were included in the study. There were 32 levels (38%) with moderate subsidence and 12 levels with severe subsidence (14%). The average VBQ score in those patients with severe subsidence was significantly higher than those without subsidence (3.80 vs. 2.40, P<0.01). A threshold value of 3.2 was determined to be optimal for predicting subsidence (AUC=0.99) and had a sensitivity of 100% and a specificity of 94.1% in predicting subsidence. CONCLUSIONS: VBQ strongly correlates with the subsidence of interbody grafts after ACDF. A threshold VBQ score value of 3.2 has excellent sensitivity and specificity for predicting subsidence. Spine surgeons can use VBQ as a readily available screening tool to identify patients at higher risk for subsidence. LEVEL OF EVIDENCE: Level-IV.

Is Upper Extremity or Lower Extremity Function More Important for Patient Satisfaction? An Analysis of 24-Month Outcomes from the QOD Cervical Spondylotic Myelopathy Cohort.

STUDY DESIGN: Retrospective analysis of a prospective, multicenter registry. OBJECTIVE: To assess whether upper or lower limb mJOA improvement more strongly associates with patient satisfaction after surgery for cervical spondylotic myelopathy (CSM). SUMMARY OF BACKGROUND DATA: The modified Japanese Orthopaedic Association (mJOA) is commonly used to assess functional status in patients with CSM. Patients present with upper and/or lower extremity dysfunction, and it is unclear whether improvement in one and/or both symptoms drives postoperative patient satisfaction. METHODS: This study utilizes the prospective Quality Outcomes Database (QOD) CSM data set. Clinical outcomes included mJOA and North American Spine Society (NASS) satisfaction. The upper limb mJOA score was defined as upper motor plus sensory mJOA, and the lower limb mJOA as lower motor plus sensory mJOA. Ordered logistic regression was used to determine whether upper or lower limb mJOA was more closely associated with NASS satisfaction, adjusting for other covariates. RESULTS: Overall, 1141 patients were enrolled in the QOD CSM cohort. In all, 780 had both preoperative and 24-month mJOA scores, met inclusion criteria, and were included for analysis. The baseline mJOA was 12.1±2.7, and postoperatively, 85.6% would undergo surgery again (NASS 1 or 2, satisfied). Patients exhibited mean improvement in both upper (baseline:3.9±1.4 vs. 24 mo:5.0±1.1, P<0.001) and lower limb mJOA (baseline:3.9±1.4 vs. 24 mon:4.5±1.5, P<0.001); however, the 24-month change in the upper limb mJOA was greater (upper:1.1±1.6 vs. lower:0.6±1.6, P<0.001). Across 24-month NASS satisfaction, the baseline upper and lower limb mJOA scores were similar (pupper=0.28, plower=0.092). However, as satisfaction decreased, the 24-month change in upper and lower limb mJOA decreased as well (pupper<0.001, plower<0.001). Patients with NASS scores of 4 (lowest satisfaction) did not demonstrate significant differences from baseline in upper or lower limb mJOA (P>0.05). In ordered logistic regression, NASS satisfaction was independently associated with upper limb mJOA improvement (OR=0.81; 95% CI: 0.68-0.97; P=0.019) but not lower limb mJOA improvement (OR=0.84; 95% CI: 0.70-1.0; P=0.054). CONCLUSIONS: As the magnitude of upper and lower mJOA improvement decreased postoperatively, so too did patient satisfaction with surgical intervention. Upper limb mJOA improvement was a significant independent predictor of patient satisfaction, whereas lower limb mJOA improvement was not. These findings may aid preoperative counseling, stratified by patients' upper and lower extremity treatment expectations. LEVEL OF EVIDENCE: Level-III.

Change of cervical flexion range of motion influences postoperative sagittal alignment of the cervical spine after laminoplasty.

OBJECTIVE: The relationships between preoperative cervical spine range of motion (ROM) and postoperative cervical sagittal alignment (CSA), and clinical outcomes after laminoplasty (LMP) have been widely studied. However, the impact of ROM changes on postoperative CSA and clinical outcomes after LMP remains unclear. Herein, patients with cervical spondylotic myelopathy (CSM) were retrospectively analyzed to explore the association between postoperative cervical ROM changes and CSA and surgical outcomes. METHODS: Patients who underwent cervical LMP at our hospital between January 2019 to June 2022 were retrospectively reviewed. CSA parameters were measured before the surgery and at the final follow-up. Loss of cervical lordosis (LCL) was defined as preoperative cervical lordosis (CL) - postoperative CL. An increase in the cervical sagittal vertical axis (I-cSVA) was defined as postoperative cervical sagittal vertical axis (cSVA) - preoperative cSVA. We defined the changes in cervical flexion range of motion (△Flex ROM, preoperative Flex ROM minus postoperative Flex ROM) > 10° as L- Flex ROM group, and △Flex ROM ≤ 10° as S- Flex ROM group. Japanese Orthopedic Association (JOA) score and visual analog score (VAS) were used to assess the surgical outcomes. RESULTS: The study comprised 74 patients and the average follow-up period was 31.83 months. CL, total ROM, and Flex ROM decreased and cSVA increased after cervical LMP. LCL and I-cSVA were positively correlated with △Flex. Multiple linear regression analysis showed that a decrease in the Flex ROM was a risk factor for LCL and I-cSVA after LMP. LCL and I-cSVA were higher in the L-Flex ROM group than in the S-Flex ROM group. Postoperative JOA and the JOA recovery rate were worse in the L-Flex ROM group than in the S-Flex ROM group. CONCLUSIONS: Cervical total and Flex ROM decreased after cervical LMP. The reduction of Flex ROM was associated with LCL and I-cSVA after surgery. The preservation of cervical Flex ROM helps maintain CSA after LMP. Therefore, more attention should be paid to maintaining cervical ROM to obtain good CSA and surgical effects after cervical LMP.

[Application of self-stabilizing zero-profile three-dimensional printed artificial vertebral bodies for treatment of cervical spondylotic myelopathy].

Objective: To evaluate the safety and effectiveness of applying self-stabilizing zero-profile three-dimensional (3D) printed artificial vertebral bodies in anterior cervical corpectomy and fusion (ACCF) for cervical spondylotic myelopathy. Methods: A retrospective analysis was conducted on 37 patients diagnosed with cervical spondylotic myelopathy who underwent single-level ACCF using either self-stabilizing zero-profile 3D-printed artificial vertebral bodies ( n=15, treatment group) or conventional 3D-printed artificial vertebral bodies with titanium plates ( n=22, control group) between January 2022 and February 2023. There was no significant difference in age, gender, lesion segment, disease duration, and preoperative Japanese Orthopedic Association (JOA) score between the two groups ( P>0.05). Operation time, intraoperative bleeding volume, hospitalization costs, JOA score and improvement rate, incidence of postoperative prosthesis subsidence, and interbody fusion were recorded and compared between the two groups. Results: Compared with the control group, the treatment group had significantly shorter operation time and lower hospitalization costs ( P<0.05); there was no significant difference in intraoperative bleeding volume between the two groups ( P>0.05). All patients were followed up, with a follow-up period of 6-21 months in the treatment group (mean, 13.7 months) and 6-19 months in the control group (mean, 12.7 months). No dysphagia occurred in the treatment group, while 5 cases occurred in the control group, with a significant difference in the incidence of dysphagia between the two groups ( P<0.05). At 12 months after operation, both groups showed improvement in JOA scores compared to preoperative scores, with significant differences ( P<0.05); however, there was no significant difference in the JOA scores and improvement rate between the two groups ( P>0.05). Radiographic examinations showed the interbody fusion in both groups, and the difference in the time of interbody fusion was not significant ( P>0.05). At last follow-up, 2 cases in the treatment group and 3 cases in the control group experienced prosthesis subsidence, with no significant difference in the incidence of prosthesis subsidence ( P>0.05). There was no implant displacement or plate-screw fracture during follow-up. Conclusion: The use of self-stabilizing zero-profile 3D-printed artificial vertebral bodies in the treatment of cervical spondylotic myelopathy not only achieves similar effectiveness to 3D-printed artificial vertebral bodies, but also reduces operation time and the incidence of postoperative dysphagia.

[Treatment of cervical ossification of posterior longitudinal ligament with titanium alloy trabecular bone three-dimensional printed artificial vertebral body].

Objective: To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods: A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C 2-7Cobb angle ( P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C 2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results: The operation time and incidence of complications were significantly lower in the study group than in the control group ( P<0.05), while the difference in intraoperative blood loss between the two groups was not significant ( P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference ( t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences ( P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group ( P<0.05); but there was no significantly difference in VAS score and NDI between the two groups ( P>0.05). Imaging re-examination showed that the vertebral height and C 2-7Cobb angle of the two groups significantly increased at 3 and 12 months after operation ( P<0.05), and there was no significant difference between 3 and 12 months after operation ( P>0.05). At each time point, the vertebral height and C 2-7Cobb angle of the study group were significantly higher than those of the control group ( P<0.05), and the implant subsidence rate was significantly lower than that of the control group ( P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups ( P>0.05). Conclusion: Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.

[Analysis of imaging characteristics and effectiveness of cervical spondylotic myelopathy with cervical kyphosis].

Objective: To investigate the imaging characteristics of cervical kyphosis and spinal cord compression in cervical spondylotic myelopathy (CSM) with cervical kyphosis and the influence on effectiveness. Methods: The clinical data of 36 patients with single-segment CSM with cervical kyphosis who were admitted between January 2020 and December 2022 and met the selection criteria were retrospectively analyzed. The patients were divided into 3 groups according to the positional relationship between the kyphosis focal on cervical spine X-ray film and the spinal cord compression point on MRI: the same group (group A, 20 cases, both points were in the same position), the adjacent group (group B, 10 cases, both points were located adjacent to each other), and the separated group (group C, 6 cases, both points were located >1 vertebra away from each other). There was no significant difference between groups ( P>0.05) in baseline data such as gender, age, body mass index, lesion segment, disease duration, and preoperative C 2-7 angle, C 2-7 sagittal vertical axis (C 2-7 SVA), C 7 slope (C 7S), kyphotic Cobb angle, fusion segment height, and Japanese Orthopedic Association (JOA) score. The patients underwent single-segment anterior cervical discectomy with fusion (ACDF). The occurrence of postoperative complications was recorded; preoperatively and at last follow-up, the patients' neurological function was evaluated using the JOA score, and the sagittal parameters (C 2-7 angle, C 2-7 SVA, C 7S, kyphotic Cobb angle, and height of the fused segments) were measured on cervical spine X-ray films and MRI and the correction rate of the cervical kyphosis was calculated; the correlation between changes in cervical sagittal parameters before and after operation and the JOA score improvement rate was analyzed using Pearson correlation analysis. Results: In 36 patients, only 1 case of dysphagia occurred in group A, and the dysphagia symptoms disappeared at 3 days after operation, and the remaining patients had no surgery-related complications during the hospitalization. All patients were followed up 12-42 months, with a mean of 20.1 months; the difference in follow-up time between the groups was not significant ( P>0.05). At last follow-up, all the imaging indicators and JOA scores of patients in the 3 groups were significantly improved when compared with preoperative ones ( P<0.05). The correction rate of cervical kyphosis in group A was significantly better than that in group C, and the improvement rate of JOA score was significantly better than that in groups B and C, all showing significant differences ( P<0.05), and there was no significant difference between the other groups ( P>0.05). The correlation analysis showed that the improvement rate of JOA score was negatively correlated with C 2-7 angle and kyphotic Cobb angle at last follow-up ( r=-0.424, P=0.010; r=-0.573, P<0.001), and positively correlated with the C 7S and correction rate of cervical kyphosis at last follow-up ( r=0.336, P=0.045; r=0.587, P<0.001), and no correlation with the remaining indicators ( P>0.05). Conclusion: There are three main positional relationships between the cervical kyphosis focal and the spinal cord compression point on imaging, and they have different impacts on the effectiveness and sagittal parameters after ACDF, and those with the same position cervical kyphosis focal and spinal cord compression point have the best improvement in effectiveness and sagittal parameters.

[Cause analysis and clinical intervention of C 5 palsy after cervical surgery].

Objective: To review the research progress of C 5 palsy (C 5P) after cervical surgery, providing new clinical intervention ideas for the C 5P patients. Methods: The relevant literature domestically and abroad was extensively consulted and the latest developments in the incidence, risk factors, manifestations and diagnosis, prevention, and intervention measures of C 5P were systematically expounded. Results: C 5P is characterized by weakness in the C 5 nerve innervation area after cervical decompression surgery, manifested as limited shoulder abduction and elbow flexion, with an incidence rate more than 5%, often caused by segmental spinal cord injury or mechanical injury to the nerve roots. For patients with risk factors, careful operation and preventive measures can reduce the incidence of C 5P. Most of the patients can recover with conservative treatment such as drug therapy and physical therapy, while those without significant improvement after 6 months of treatment may require surgical intervention such as foraminal decompression and nerve displacement. Conclusion: Currently, there has been some advancement in the etiology and intervention of C 5P. Nevertheless, further research is imperative to assess the timing of intervention and surgical protocol.

Feasibility and safety report on robotic assistance for cervical pedicle screw fixation: a cadaveric study.

This cadaveric study aimed to evaluate the safety and usability of a novel robotic system for posterior cervical pedicle screw fixation. Three human cadaveric specimens and C2-T3 were included. Freshly frozen human cadaver specimens were prepared and subjected to robot-assisted posterior cervical pedicle screw fixation using the robotic system. The accuracy of screw placement, breach rate, and critical structure violations were evaluated. The results were statistically compared with those of previous studies that used different robotic systems for cervical pedicle screw fixation. The robotic system demonstrated a high accuracy rate in screw placement. A significant number of screws were placed within predetermined safe zones. The total entry offset was 1.08 ± 0.83 mm, the target offset was 1.86 ± 0.50 mm, and the angle offset was 2.14 ± 0.77°. Accuracy rates comparable with those of previous studies using different robotic systems were achieved. The system was also feasible, allowing precise navigation and real-time feedback during the procedure. This cadaveric study validated the safety and usability of the novel robotic system for posterior cervical pedicle screw fixation. The system exhibited high precision in screw placement, and the results support the extension of the indications for robot-assisted pedicle screw fixation from the lumbar spine to the cervical spine.

Anatomical determinants of occipitocervical fusion in skull base chordoma resection: a systematic review of the literature with illustrative cases.

OBJECTIVE: Skull base chordomas are rare, locally osseo-destructive lesions that present unique surgical challenges due to their involvement of critical neurovascular and bony structures at the craniovertebral junction (CVJ). Radical cytoreductive surgery improves survival but also carries significant morbidity, including the potential for occipitocervical (OC) destabilization requiring instrumented fusion. The published experience on OC fusion after CVJ chordoma resection is limited, and the anatomical predictors of OC instability in this context remain unclear. METHODS: PubMed and Embase were systematically searched according to the PRISMA guidelines for studies describing skull base chordoma resection and OC fusion. The search strategy was predefined in the authors' PROSPERO protocol (CRD42024496158). RESULTS: The systematic review identified 11 surgical case series describing 209 skull base chordoma patients and 116 (55.5%) who underwent OC instrumented fusion. Most patients underwent lateral approaches (n = 82) for chordoma resection, followed by midline (n = 48) and combined (n = 6) approaches. OC fusion was most often performed as a second-stage procedure (n = 53), followed by single-stage resection and fusion (n = 38). The degree of occipital condyle resection associated with OC fusion was described in 9 studies: total unilateral condylectomy reliably predicted OC fusion regardless of surgical approach. After lateral transcranial approaches, 4 studies cited at least 50%-70% unilateral condylectomy as necessitating OC fusion. After midline approaches-most frequently the endoscopic endonasal approach (EEA)-at least 75% unilateral condylectomy (or 50% bilateral condylectomy) led to OC fusion. Additionally, resection of the medial atlantoaxial joint elements (the C1 anterior arch and tip of the dens), usually via EEA, reliably necessitated OC fusion. Two illustrative cases are subsequently presented, further exemplifying how the extent of CVJ bony elements removed via EEA to achieve complete chordoma resection predicts the need for OC fusion. CONCLUSIONS: Unilateral total condylectomy, 50% bilateral condylectomy, and resection of the medial atlantoaxial joint elements were the most frequently described independent predictors of OC fusion in skull base chordoma resection. Additionally, consistent with the occipital condyle harboring a significantly thicker joint capsule at its posterolateral aspect, an anterior midline approach seems to tolerate a greater degree of condylar resection (75%) than a lateral transcranial approach (50%-70%) prior to generating OC instability.

Hidden blood loss in unilateral open-door cervical laminoplasty for multilevel cervical spondylotic myelopathy.

OBJECTIVES: This study aims to evaluate the hidden blood loss (HBL) and its possible risk factors after unilateral open-door cervical laminoplasty (UOCL) in patients with multilevel cervical spondylotic myelopathy (MCSM). PATIENTS AND METHODS: Between January 2018 and March 2023, a total of 105 patients (55 males, 50 females; median age: 76 years; range, 52 to 93 years) who underwent C3-7 UOCL for MCSM were retrospectively analyzed. Data of the patients were recorded, including age, sex, height, weight, plasma albumin, blood glucose, hematocrit, American Society of Anesthesiologists (ASA) score, surgical time, and intraoperative blood loss. The HBL was calculated according to the Sehat formula, and risk factors were identified. RESULTS: The median surgical time was 180.7 min. The median total blood loss (TBL) and median HBL were 507.4 mL and 201.7 mL, respectively. Correlation analyses revealed that body mass index and surgical time were correlated with HBL (p<0.05). However, multiple linear regression analysis showed that HBL was positively correlated with surgical time (ß=0.293, p<0.05). CONCLUSION: Our study results showed that surgical time is an independent risk factor for HBL. Therefore, HBL should not be overlooked in patients with MCSM undergoing UOCL, particularly in the patients with expected long surgical time.

Does Preoperative Radiation Therapy Performed for Metastatic Spine Cancer at the Cervical Spine Increase Perioperative Complications of Anterior Cervical Surgery?

Background: Radiation therapy (RT) performed before anterior cervical spine surgery (ACSS) may cause fascial plane fibrosis, decreased soft-tissue vascularity, and vertebral body weakness, which could increase the risk of esophageal and major vessel injuries, wound complications, and construct subsidence. Therefore, this study aimed to evaluate whether preoperative RT performed for metastatic spine cancer (MSC) at the cervical spine increases perioperative morbidity for ACSS. Methods: Forty-nine patients who underwent ACSS for treatment of MSC at the cervical spine were retrospectively reviewed. All the patients underwent anterior cervical corpectomy via the anterior approach. Patient demographics, surgical factors, operative factors, and complications were recorded. Results of patients who were initially treated with RT before ACSS (RT group) were compared with those who did not receive RT before ACSS (non-RT group). Results: Eighteen patients (36.7%) were included in the RT group, while the remaining 31 (63.3%) were included in the non-RT group. Surgery-related factors, including operation time (p = 0.109), estimated blood loss (p = 0.246), amount of postoperative drainage (p = 0.604), number of levels operated (p = 0.207), and number of patients who underwent combined posterior fusion (p = 0.768), did not significantly differ between the 2 groups. Complication rates, including esophageal injury, dural tear, infection, wound dehiscence, and mechanical failure, did not significantly differ between the RT and non-RT groups. Early subsidence was significantly greater in the non-RT group compared to that in the RT group (p = 0.012). Conclusions: RT performed before surgery for MSC does not increase the risk of wound complication, mechanical failure, or vital structure injury during ACSS. The surgical procedural approach was not complicated by previous RT history. Therefore, surgeons can safely choose the anterior approach when the number of levels or location of MSC favors anterior surgery, and performing a posterior surgery is unnecessary due to a concern that previous RT may increase complication rates of ACSS.

Biportal endoscopic cervical open-door laminoplasty to treat cervical spondylotic myelopathy.

BACKGROUND: Although cervical laminoplasty is a frequently utilized surgical intervention for cervical spondylotic myelopathy, it is primarily performed using conventional open surgical techniques. We attempted the minimally invasive cervical laminoplasty using biportal endoscopic approach. METHODS: Contralateral lamina access is facilitated by creating space through spinous process drilling, followed by lamina hinge formation. Subsequently, the incised lamina is elevated from ipsilateral aspect, and secure metal plate fixation is performed. CONCLUSION: We successfully performed the cervical open door laminoplasty using biportal endoscopic approach. Biportal endoscopic cervical open-door laminoplasty may be a minimally invasive technique that can prevent complications related with open surgery.