RESUMO
A 3D flower-shaped bimetallic nanocomposite zirconium magnesium oxide (ZMO) was prepared first time by the controlled solution combustion method using triethanolamine (TEA) as a fuel and chelating agent. The composite material was used to remove excess fluoride via adsorption. The thermal stability of the adsorbent was characterized by thermogravimetric analysis (TGA). Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD) were used to characterize the adsorbent. The surface charge of the nano adsorbent was determined by Zeta Sizer. The surface area and pore volume of the adsorbent were determined by Brunauer-Emmett-Teller (BET) isotherm and Barrett-Joyner-Halenda (BJH) methods. The adsorption behavior of fluoride was studied systematically varying the pH, contact time, adsorbent dose, and initial fluoride concentration. The adsorption followed the Langmuir isotherm model with a maximum adsorption capacity of 42.14 mg/g. The pseudo-second-order kinetic model was confirmed by the adsorption study. The maximum adsorption efficiency was in the 6-10 pH range. The reaction mechanism was mainly based on ion exchange between hydroxy and fluoride ions which was proven by X-ray photoelectron spectroscopy (XPS). Real water tests indicated that ZMO could be used as a potential defluoridation agent for fluoride containing groundwater treatment.
Assuntos
Nanocompostos , Poluentes Químicos da Água , Fluoretos/química , Óxido de Magnésio , Magnésio , Zircônio/análise , Adsorção , Nanocompostos/química , Cinética , Espectroscopia de Infravermelho com Transformada de Fourier , Concentração de Íons de Hidrogênio , Poluentes Químicos da Água/análiseRESUMO
The present systematic review and meta-analysis aimed to assess the characteristics and consequences of post-processing methods after grinding procedures in YSZ ceramics on its surface roughness and flexural strength. The protocol of this review was made prospectively and is available online in the PROSPERO database (link). Literature searches on PubMed/MEDLINE, EMBASE, Lilacs, Web of Science and Scopus were conducted on December 2022 to select in vitro studies written in English, without publishing-date restrictions, that considered surface characteristics and mechanical properties of YSZ ceramics submitted to grinding and subsequent post-processing surface treatments as an attempt to revert the effect induced by grinding. Two authors independently selected the studies, extracted the data and assessed the risk of bias. Mean differences (Rev-Man 5.1, random effects model, α= 0.05) were obtained by comparing flexural strength and surface roughness values of ground surfaces with at least one post-processing surface treatment (global analysis). Subgroup analyses were performed considering the most prevalent categories of post-processing methods. A total of 33 (out of 4032) studies were eligible and included in the analysis. In the global analysis, ground surfaces showed higher flexural strength than when post-processing methodologies were employed (p< 0.0001). The subgroup analysis showed that only polishing was able to enhance the flexural strength after grinding (p= 0.001); however, when other protocols were used, the ground surface was always superior in terms of flexural strength (p< 0.0001). Post-processing techniques in both the global and sub-group analyses were able to reduce the surface roughness after grinding in YSZ ceramics (p< 0.00001). High heterogeneity was found in all the meta-analyses. Concerning the risk of bias analysis, the included studies had mixed scores for the considered factors. In conclusion, in terms of improving flexural strength and restoring surface roughness after grinding, polishing protocols can be considered the best indication as post-processing treatment after YSZ ceramics adjustments/grinding.
Assuntos
Ítrio , Zircônio , Humanos , Teste de Materiais , Propriedades de Superfície , Zircônio/análise , Ítrio/análise , Cerâmica , Polimento Dentário , Porcelana DentáriaRESUMO
The biosynthesis of metal oxide nanoparticles provides an excellent alternative to the chemical synthesis approach. The aim of the current study was a green and eco-friendly synthesis of zirconium nanoparticles (ZrNPs) from fruit peels of Punica granatum (Pomegranate). The synthesis of ZrNPs was confirmed using a UV-visible spectrophotometer. The functional groups present on surface of ZrNPs were analyzed using FTIR. The average size of obtained ZrNPs was analyzed using SEM and DLS and it was around 20-60 nm. The antimicrobial activity of obtained ZrNPs was tested against Gram-positive strains (Bacillus subtilis and Staphylococcus aureus), Gram-negative strains (Escherichia coli and Klebsiella pneumoniae) and Fungi (Aspergillus niger) by agar well diffusion method. ZrNPs showed maximum zone of inhibition against S. aureus (19 mm) and A. niger (18 mm) at the maximum concentration of 200 µg/mL. The antioxidant scavenging activity of obtained ZrNPs was analyzed using the following methods: DPPH radical scavenging activity, Hydroxyl radical scavenging activity, Ferric reducing antioxidant power and hydrogen peroxide radical scavenging activity. This the first and foremost study on ZrNPs synthesized using P. granatum fruit peel extract reporting their efficacy as antimicrobial agents against Bacteria and Fungi. Considering the tolerance of zirconium towards human body, it can also be used as antimicrobial coating material on human implants.
Assuntos
Anti-Infecciosos , Nanopartículas Metálicas , Punica granatum , Antibacterianos/análise , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Antioxidantes/análise , Antioxidantes/farmacologia , Frutas/química , Humanos , Nanopartículas Metálicas/química , Testes de Sensibilidade Microbiana , Extratos Vegetais/farmacologia , Staphylococcus aureus , Zircônio/análiseRESUMO
PURPOSE: The purpose of this study was to evaluate the effect of veneering and aging on the translucency of newly introduced extra and high translucent zirconia with different thickness. MATERIALS AND METHODS: One hundred forty disk-shaped specimens were fabricated from two translucent zirconia blocks (VITA YZ XT and VITA YZ HT), and they are milled with CAD/CAM system. Then, specimens were divided into nonveneered (XT, HT) and veneered groups (XTV, HTV). Nonveneered groups were prepared with four different thicknesses (0.5-1-1.5-2 mm). Veneered groups were divided into three subgroups (n = 10) for veneering with base dentin ceramic with thicknesses of 0.5 + 0.5, 0.5 + 1, and 0.5 + 1.5 mm. A spectrophotometer was used to calculate the translucency parameter (TP) and contrast ratio (CR) of all specimens before and after aging. Statistical analysis was performed using 3-way ANOVA and Tukey HSD tests (p < 0.05). RESULTS: TP values were significantly affected by thickness of specimens (p < 0.001). VITA YZ XT was significantly found more translucent than VITA YZ HT. The highest translucency was observed in the XT-0.5 mm group. There is no significant difference between translucency of the veneered and nonveneered groups in the same thickness for XT. On the contrary, veneering significantly affected translucency of HT. TP values significantly decreased after aging for all groups. After aging, translucency value difference before and after aging was the highest in the XT-0.5 mm group whereas the HTV-2 mm group showed the lowest difference after aging. TP decreased significantly as thickness of specimen increases regardless of the material type. Extra translucent and nonveneered zirconia groups are more prone to hydrothermal aging. CONCLUSIONS: The translucency parameter of zirconia ceramics was significantly influenced by both material type and veneering. Also, extra translucent and nonveneered zirconia groups are more susceptible to hydrothermal aging.
Assuntos
Restauração Dentária Permanente/métodos , Teste de Materiais/métodos , Zircônio/química , Cerâmica/química , Cor , Desenho Assistido por Computador , Porcelana Dentária/química , Humanos , Espectrofotometria/métodos , Propriedades de Superfície , Fatores de Tempo , Zircônio/análiseRESUMO
Objetivo: O objetivo deste estudo é fornecer ao cirurgião-dentista conhecimento sobre aspectos gerais da zircônia e abordar a introdução das diferentes gerações. Materiais e métodos: Foi realizada uma pesquisa eletrônica da literatura atual em inglês, incluindo artigos científicos publicados até 2019. Resultados: De acordo com os artigos selecionados, diferenças importantes foram encontradas em relação as novas composições da zircônia, sua microestrutura, diferenças no conteúdo da fase cúbica, e de ítria na fase tetragonal, levando a diferentes propriedades ópticas, mecânicas e de resistência ao envelhecimento. Conclusão: A zircônia é o material mais resistente disponível entre as cerâmicas, com diferenças mecânicas e ópticas entre os materiais disponíveis. A introdução das coroas monolíticas resolveu o problema de lascamento da porcelana de cobertura, mas foram necessárias modificações estruturais para fornecer adequada translucidez.
Purpose: This study aims to provide knowledge to clinicians about general aspects of zirconia and to approach the introduction of different zirconia generations. Methods:An electronic search of the English current literature was conducted including scientific articles published up to 2019. Results: According to the selected articles, important differences were found in terms of the novel compositions of zirconia, microstructures among the materials, differences in cubic phase content and yttria in the tetragonal phase, leading to different optical, mechanical and aging resistance properties. Conclusion: Zirconia is the most resistant material available among ceramics with mechanical and optical differences on available materials. The introduction of the monolithic crowns solving the veneering delamination but struc-tural modifications were necessary to provide adequate translucency
Assuntos
Zircônio/análise , Zircônio/uso terapêuticoRESUMO
The megalithic jar sites of Laos (often referred to as the Plain of Jars) remain one of Southeast Asia's most mysterious and least understood archaeological cultures. The sites, recently inscribed as UNESCO World Heritage, host hollowed stone jars, up to three metres in height, which appear scattered across the landscape, alone or clustered in groups of up to more than 400. Until now, it has not been possible to estimate when the jars were first placed on the landscape or from where the stone was sourced. Geochronological analysis using the age of detrital zircons demonstrates a likely quarry source for one of the largest megalithic jar sites. Optically Stimulated Luminescence (OSL) dating suggests the jars were positioned at the sites potentially as early as the late second millennium BC. Radiocarbon dating of skeletal remains and charcoal samples places mortuary activity around the jars from the 9-13th century AD, suggesting the sites have maintained ritual significance from the period of their initial placement until historic times.
Assuntos
Fósseis/história , Sedimentos Geológicos/análise , Dosimetria por Luminescência Estimulada Opticamente/métodos , Arqueologia , Carvão Vegetal/história , Cultura , História Antiga , História Medieval , Humanos , Laos , Chumbo/análise , Datação Radiométrica/métodos , Silicatos/análise , Zircônio/análiseRESUMO
BACKGROUND: Monolithic restorations made of translucent yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) have become popular over the past few decades. However, whether aging affects the color and translucency of monolithic translucent Y-TZP is unclear. OBJECTIVE: The aim of this systematic review and meta-analysis of in vitro studies was to evaluate the effects of aging on the color and translucency of monolithic translucent Y-TZP ceramics. MATERIALS AND METHODS: This systematic review/meta-analysis was reported according to the PRISMA statement and registered in the OSF registries (https://osf.io/5qjmu). Four databases including Medline via the PubMed, Embase, and Web of Science databases and the Cochrane Library were searched using no publication year and language limits. The last search was executed on November 20, 2020. In vitro studies comparing the translucency and/or color of monolithic translucent Y-TZP ceramics before and after simulated aging were selected. Meta-analyses were performed using Review Manager software (version 5.3, Cochrane Collaboration, Oxford, UK) with random-effects models at a significance level of 0.05. A risk-of-bias assessment was also performed for the included studies. RESULTS: Of the 188 potentially relevant studies, 13 were included in the systematic review. The hydrothermal aging duration ranged from 1 to 100 h at relatively similar temperatures (~134°C). In the general meta-analyses, the aged Y-TZP ceramics exhibited similar translucency parameter (TP), L∗, and b∗ values compared with the nonaged controls (P = .73, P = .49, and P = .62, respectively). Moreover, there was a significant difference between the aged and nonaged Y-TZP ceramics in the a∗ value (P = .03; MD = -0.26; 95% CI = -0.51 to - 0.02), favoring the nonaged Y-TZP ceramics. The subgroup analyses showed that the duration of aging contributed to changes in the translucency and color of the Y-TZP ceramics. CONCLUSIONS: The optical properties of monolithic translucent Y-TZP ceramics were stable after hydrothermal aging at 134°C and 0.2 MPa for ≤20 h. Moreover, clinically unacceptable changes in the translucency and color of monolithic translucent Y-TZP ceramics were found after hydrothermal aging for >20 h.
Assuntos
Cerâmica , Ítrio , Zircônio , Cerâmica/análise , Cerâmica/química , Cor , Teste de Materiais , Propriedades de Superfície , Temperatura , Fatores de Tempo , Ítrio/análise , Ítrio/química , Zircônio/análise , Zircônio/químicaRESUMO
BACKGROUND: Forms of interstitial pneumonia secondary to exposure to an air-contaminant are varied and so far, insufficiently described. OBJECTIVES/METHODS: We report here a case of a 57-year-old patient managed in our department for the exploration of MRC grade 2 dyspnoea and interstitial pneumonia. He mentioned multiple occupational and domestic exposures such as hens' excrements, asbestos and metal particles; he also had a previous history of smoking. RESULTS: High-resolution computed tomography showed ground glass opacities predominating in posterior territories and surrounding cystic lesions or emphysematous destruction. The entire etiological assessment revealed only macrophagic alveolitis with giant multinucleated cells on the bronchoalveolar lavage. A surgical lung biopsy allowed us to refine the diagnosis with evidence of desquamative interstitial pneumonia and pulmonary granulomatosis. Finally, the analysis of the mineral particles in the biopsy revealed abnormally high rates of Zirconium and Aluminium. We were therefore able to conclude to a desquamative interstitial pneumonia associated with pulmonary granulomatosis linked to metal exposure (Aluminium and Zirconium). The clinical, functional and radiological evolution was favorable after a systemic corticosteroid treatment with progressive decay over one year. CONCLUSION: This presentation reports the first case to our knowledge of desquamative interstitial pneumonitis related to exposure to Zirconium and the third one in the context of Aluminium exposure. The detailed analysis of the mineral particles present on the surgical lung biopsy allows for the identification of the relevant particle to refine the etiological diagnosis, to guide the therapeutic management and to give access to recognition as an occupational disease. (Sarcoidosis Vasc Diffuse Lung Dis 2020; 37 (1): 79-84).
Assuntos
Alumínio/efeitos adversos , Granuloma do Sistema Respiratório/induzido quimicamente , Exposição por Inalação/efeitos adversos , Doenças Pulmonares Intersticiais/induzido quimicamente , Pulmão/efeitos dos fármacos , Zircônio/efeitos adversos , Corticosteroides/administração & dosagem , Alumínio/análise , Biópsia , Granuloma do Sistema Respiratório/diagnóstico , Granuloma do Sistema Respiratório/tratamento farmacológico , Granuloma do Sistema Respiratório/metabolismo , Humanos , Pulmão/química , Pulmão/diagnóstico por imagem , Pulmão/patologia , Doenças Pulmonares Intersticiais/diagnóstico , Doenças Pulmonares Intersticiais/tratamento farmacológico , Doenças Pulmonares Intersticiais/metabolismo , Masculino , Pessoa de Meia-Idade , Resultado do Tratamento , Zircônio/análiseRESUMO
Ischaemic heart disease evokes a complex immune response. However, tools to track the systemic behaviour and dynamics of leukocytes non-invasively in vivo are lacking. Here, we present a multimodal hot-spot imaging approach using an innovative high-density lipoprotein-derived nanotracer with a perfluoro-crown ether payload (19F-HDL) to allow myeloid cell tracking by 19F magnetic resonance imaging. The 19F-HDL nanotracer can additionally be labelled with zirconium-89 and fluorophores to detect myeloid cells by in vivo positron emission tomography imaging and optical modalities, respectively. Using our nanotracer in atherosclerotic mice with myocardial infarction, we observed rapid myeloid cell egress from the spleen and bone marrow by in vivo 19F-HDL magnetic resonance imaging. Concurrently, using ex vivo techniques, we showed that circulating pro-inflammatory myeloid cells accumulated in atherosclerotic plaques and at the myocardial infarct site. Our multimodality imaging approach is a valuable addition to the immunology toolbox, enabling the study of complex myeloid cell behaviour dynamically.
Assuntos
Células Mieloides/patologia , Isquemia Miocárdica/diagnóstico por imagem , Animais , Aterosclerose/diagnóstico por imagem , Aterosclerose/patologia , Rastreamento de Células/métodos , Éteres de Coroa/análise , Feminino , Corantes Fluorescentes/análise , Flúor/análise , Imageamento por Ressonância Magnética/métodos , Camundongos , Camundongos Endogâmicos C57BL , Imagem Multimodal/métodos , Infarto do Miocárdio/diagnóstico por imagem , Infarto do Miocárdio/patologia , Isquemia Miocárdica/patologia , Imagem Óptica/métodos , Tomografia por Emissão de Pósitrons/métodos , Radioisótopos/análise , Zircônio/análiseRESUMO
Nanotherapy has recently emerged as an experimental treatment option for atherosclerosis. To fulfill its promise, robust noninvasive imaging approaches for subject selection and treatment evaluation are warranted. To that end, we present here a positron emission tomography (PET)-based method for quantification of liposomal nanoparticle uptake in the atherosclerotic vessel wall. We evaluated a modular procedure to label liposomal nanoparticles with the radioisotope zirconium-89 (89Zr). Their biodistribution and vessel wall targeting in a rabbit atherosclerosis model was evaluated up to 15 days after intravenous injection by PET/computed tomography (CT) and PET/magnetic resonance imaging (PET/MRI). Vascular permeability was assessed in vivo using three-dimensional dynamic contrast-enhanced MRI (3D DCE-MRI) and ex vivo using near-infrared fluorescence (NIRF) imaging. The 89Zr-radiolabeled liposomes displayed a biodistribution pattern typical of long-circulating nanoparticles. Importantly, they markedly accumulated in atherosclerotic lesions in the abdominal aorta, as evident on PET/MRI and confirmed by autoradiography, and this uptake moderately correlated with vascular permeability. The method presented herein facilitates the development of nanotherapy for atherosclerotic disease as it provides a tool to screen for nanoparticle targeting in individual subjects' plaques.
Assuntos
Aterosclerose/diagnóstico por imagem , Lipossomos/análise , Placa Aterosclerótica/diagnóstico por imagem , Tomografia por Emissão de Pósitrons/métodos , Radioisótopos/análise , Zircônio/análise , Animais , Aorta Abdominal/diagnóstico por imagem , Masculino , Coelhos , Distribuição TecidualRESUMO
The suitability of a reference element or normalizer used in assessing soil contamination levels using enrichment factor (EF) is important for soil quality assessment and monitoring. This study evaluated the results of using three reference elements Ti, Fe, and Zr for EF determination of Rb and Sr in soils within treated wastewater discharge vicinity, Central Botswana. The upper continental crust (UCC), world average values (WAV), and the local background values (LBV) were used in EF assessment of eight pedons. The elemental concentrations of the soils were determined with portable X-ray fluorescence (pXRF) analyzer. Relationships between the elements were strongly significant between Rb and Ti (r = 0.600, p < 0.01), Rb and Fe (r = 0.735, p < 0.01), Sr and Ti (r = 0.545, p < 0.01), and Sr and Fe (r = 0.841, p < 0.01). Second-level correlation analysis between contamination factor (CF) and EF levels showed Zr as the best reference element for Rb and Sr in the soils. Results from this study provide baseline knowledge necessary for contamination assessment and monitoring of soils with similar environmental conditions.
Assuntos
Monitoramento Ambiental/métodos , Rubídio/análise , Poluentes do Solo/análise , Estrôncio/análise , Águas Residuárias/química , Zircônio/análise , Botsuana , Solo/químicaRESUMO
Background and Objectives: All-ceramic prosthesis is widely used in modern dental practice because of its improved physico-mechanical and optical properties. These restorations are exposed to coloring agents from various nutrition and beverages in the oral cavity. Long-term color stability is critical for the success of these restorative materials. The purpose of this in vitro study was to assess the effect of common beverages and mouthwash on the color stability of lithium disilicate (LD), monolithic zirconia (MZ) and bilayer zirconia (BZ) surfaces. Materials and Method: Thirty disc-shaped specimens from each material were fabricated; each group was subdivided (n = 10) according to coffee, green tea and chlorhexidine immersion solutions. The baseline color of ceramic discs was recorded according to the CIE L*a*b* system with a portable spectrophotometer. The second measurement was recorded after 3000 thermocycling and immersion in coloring agents for 7 days. The mean color difference was calculated and data were compared with Kruskal-Wallis and Mann-Whitney post hoc tests (0.05). Results: ΔE values for LD with the immersion of coffee, tea, and Chlorhexidine gluconate (CHG) were 1.78, 2.241 and 1.58, respectively. Corresponding ΔE values for MZ were 5.60, 5.19, and 4.86; marginally higher than the clinically acceptable level of 3.5. Meanwhile, BZ showed better color stability compared to MZ with ΔE values of 4.22, 2.11 and 1.43. Conclusions: Among the ceramics evaluated, LD ceramic was found to be more color stable, while MZ ceramics displayed a higher susceptibility to discoloration. MZ and BZ ceramic colors were significantly altered with coffee immersion, while LD ceramics were more affected by green tea.
Assuntos
Cerâmica , Cor , Porcelana Dentária/efeitos adversos , Zircônio/análise , Clorexidina/efeitos adversos , Café/efeitos adversos , Implantes Dentários , Porcelana Dentária/farmacocinética , Humanos , Chá/efeitos adversos , Zircônio/farmacocinéticaRESUMO
Objectives: The aim of this study was to evaluate chemical and topographical changes in the intaglio zirconia surface induced by chemical conditioning solutions using FTIR and SEM analysis. Material and method: twelve plates for each FTIR and SEM tests from each zirconia materials (UPCERA HT White, BruxZir® Solid Zirconia, and Copran® Multilayer), milled by a Yenadent CAD/CAM system, sintered and divided randomly into a three groups. A different surface conditioning was applied to the intaglio surface of each group: 30% hydrogen peroxide, 30% citric acid and control group. Result and discussion: by using of the FTIR spectroscopy, an evidence of new bands formation appeared at 1637cm-1 and 3352cm-1 due to the high oxidizing effect of hydrogen peroxide, and at 630cm-1 and 1663cm-1 due to the chelating action of citric acid, and simultaneously, SEM assessment of the surface topography took place, to identify lines, scratches, or surface dissociation that appeared on the intaglio zirconia surface after conditioning. Conclusion: such analysis provides an enhancement of new convenient, less expensive, reliable trials to improve micro-bond strength of luting cement to Y-TZP ceramics.
Assuntos
Humanos , Resinas Sintéticas , Zircônio/análise , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Microscopia Eletrônica de Varredura , Cimentos Dentários , Peróxido de HidrogênioRESUMO
This paper documents the first U-Pb zircon ages for Ashfall Fossil Beds (Nebraska, USA), a terrestrial Konservat-Lagerstätte mass-death assemblage that is arguably the most diverse of its type and age. The Ashfall tephra was correlated with ignimbrites from the Bruneau-Jarbidge volcanic field (12.7-10.5 Ma) in southwest Idaho based on geochemical analysis. The methods and geochemical data supporting the original age assessment of the ash bed, however, were never published, and there has been a persistent misconception that dateable heavy minerals (e.g., zircon) are absent. Notwithstanding, we recovered abundant zircons from Ashfall Fossil Beds, and from an ash bed ~6 km to the southeast at Grove Lake, Nebraska, and analyzed them through LA-ICP-MS. Our new zircon U-Pb age of 11.86 ± 0.13 Ma substantiates correlation of the Ashfall Fossil Beds deposit to tuffs originating from the Bruneau-Jarbidge caldera (~12.7-10.5 Ma). Our U-Pb zircon age of 6.42 ± 0.06 Ma for the Grove Lake ash bed coincides with supervolcanic activity in the Heise volcanic field (6.6-4.3 Ma) in eastern Idaho. These new dates improve age constraints of strata comprising the Ogallala Group and the important paleontological site. Moreover, we find that detrital and airfall zircons are unevenly distributed in the stratified ash beds we describe herein and presumably in similar deposits worldwide. Therefore, a higher-resolution sampling scheme is necessary in such cases.
Assuntos
Erupções Vulcânicas/história , História Antiga , Idaho , Chumbo/análise , Nebraska , Paleontologia , Datação Radiométrica , Silicatos/análise , Solo/química , Urânio/análise , Erupções Vulcânicas/análise , Zircônio/análiseRESUMO
Hydrosphere interactions and alteration of the terrestrial crust likely played a critical role in shaping Earth's surface, and in promoting prebiotic reactions leading to life, before 4.03 Ga (the Hadean Eon). The identity of aqueously altered material strongly depends on lithospheric cycling of abundant and water-soluble elements such as Si and O. However, direct constraints that define the character of Hadean sedimentary material are absent because samples from this earliest eon are limited to detrital zircons (ZrSiO4). Here we show that concurrent measurements of Si and O isotope ratios in Phanerozoic and detrital pre-3.0 Ga zircon constrain the composition of aqueously altered precursors incorporated into their source melts. Phanerozoic zircon from (S)edimentary-type rocks contain heterogeneous δ18O and δ30Si values consistent with assimilation of metapelitic material, distinct from the isotopic character of zircon from (I)gneous- and (A)norogenic-type rocks. The δ18O values of detrital Archean zircons are heterogeneous, although yield Si isotope compositions like mantle-derived zircon. Hadean crystals yield elevated δ18O values (vs. mantle zircon) and δ30Si values span almost the entire range observed for Phanerozoic samples. Coupled Si and O isotope data represent a constraint on Hadean weathering and sedimentary input into felsic melts including remelting of amphibolites possibly of basaltic origin, and fractional addition of chemical sediments, such as cherts and/or banded iron formations (BIFs) into source melts. That such sedimentary deposits were extensive enough to change the chemical signature of intracrustal melts suggests they may have been a suitable niche for (pre)biotic chemistry as early as 4.1 Ga.
Assuntos
Isótopos/análise , Espectrometria de Massas/métodos , Isótopos de Oxigênio/análise , Silicatos/análise , Silicatos/química , Silício/análise , Zircônio/análise , Zircônio/química , Austrália , Sedimentos Geológicos/química , África do SulRESUMO
Granular zirconium-aluminum hybrid adsorbent (GZAHA) was fabricated for efficient defluoridation of groundwater in filter application. GZAHA was formed through the aggregation of massive Zr/Al oxide nanoparticles with an amorphous pattern. This adsorbent has a satisfactory mechanical strength, a specific surface area of 29.55 m2/g, and numerous hydroxyl groups on the surface. F adsorption equilibrium could be achieved within 12 h, and the sorption process followed a pseudo-second-order reaction rate. The maximum adsorption capacity of F estimated from the Langmuir model was 65.07 mg/g at 25 °C, being greater than most of other granular adsorbents. The removal efficiency of F could be maintained in a wide pH range of 5~9. The presence of phosphate posed an adverse effect on F adsorption due to the competition mechanisms. The saturated adsorbents could be regenerated and reused for four times by using sodium hydroxide solution as an eluent, and the adsorption capacity remained around 80%. Besides electrostatic attraction and Al-F complex, surface complexation and anion exchange were also involved in the adsorption process. Continuous adsorption experiments illustrated that 808 bed volumes of F-contaminated water (F = 5 mg/L) were treated successfully by a GZAHA-packed column without second pollution.
Assuntos
Alumínio/análise , Fluoretos/análise , Óxidos/química , Zircônio/análise , Adsorção , Água Subterrânea , Cinética , Poluentes Químicos da ÁguaRESUMO
Tumor angiogenesis has attracted increasing attention because of its potential as a valuable marker in the differential diagnosis of brain tumors as well as a novel therapeutic target. Prostate-specific membrane antigen (PSMA) is expressed by the neovasculature endothelium of some tumors, with little to no expression by the tumor cells or normal vasculature endothelium. The aim of this study was to investigate the potential of PSMA for the evaluation of the tumor neovasculature of various brain tumors and the possibility of detecting PSMA expression in brain tumors using PET imaging with 89Zr-Df-IAB2M (anti-PSMA minibody). Eighty-three tissue specimens including gliomas, metastatic brain tumors, primary central nervous system lymphomas (PCNSL), or radiation necroses were analyzed by immunohistochemical staining with PSMA antibody. 89Zr-Df-IAB2M PET scans were performed in three patients with recurrent high-grade gliomas or metastatic brain tumor. PSMA was highly expressed in the vascular endothelium of high-grade glioma and metastatic brain tumor, whereas PSMA was poorly expressed in the vascular endothelium of PCNSL and radiation necrosis. PSMA expression in high-grade gliomas and a metastatic brain tumor was clearly visualized by PET imaging with 89Zr-Df-IAB2M. Furthermore, a trend toward a positive correlation between the degree of 89Zr-Df-IAB2M uptake and PSMA expression levels in tumor specimens was observed. PET imaging of PSMA using 89Zr-Df-IAB2M may have potential value in the differential diagnosis of high-grade glioma from PCNSL or radiation necrosis as well as in the prediction of treatment efficacy and assessment of treatment response to bevacizumab therapy for high-grade glioma.
Assuntos
Antígenos de Superfície/metabolismo , Neoplasias Encefálicas/diagnóstico por imagem , Encéfalo/diagnóstico por imagem , Endotélio Vascular/metabolismo , Glutamato Carboxipeptidase II/metabolismo , Neovascularização Patológica/diagnóstico por imagem , Tomografia por Emissão de Pósitrons , Adulto , Idoso , Encéfalo/irrigação sanguínea , Encéfalo/metabolismo , Encéfalo/patologia , Neoplasias Encefálicas/irrigação sanguínea , Neoplasias Encefálicas/metabolismo , Neoplasias Encefálicas/patologia , Endotélio Vascular/patologia , Feminino , Glioma/irrigação sanguínea , Glioma/diagnóstico por imagem , Glioma/metabolismo , Glioma/patologia , Humanos , Imunoglobulinas/administração & dosagem , Imunoglobulinas/análise , Neoplasias Pulmonares/irrigação sanguínea , Neoplasias Pulmonares/diagnóstico por imagem , Neoplasias Pulmonares/metabolismo , Neoplasias Pulmonares/patologia , Linfoma/diagnóstico por imagem , Linfoma/metabolismo , Linfoma/patologia , Masculino , Pessoa de Meia-Idade , Necrose/diagnóstico por imagem , Necrose/etiologia , Necrose/metabolismo , Necrose/patologia , Neovascularização Patológica/metabolismo , Neovascularização Patológica/patologia , Lesões por Radiação/diagnóstico por imagem , Lesões por Radiação/metabolismo , Lesões por Radiação/patologia , Radioisótopos/administração & dosagem , Radioisótopos/análise , Compostos Radiofarmacêuticos , Zircônio/administração & dosagem , Zircônio/análiseRESUMO
Ti-13Nb-(0-6)Zr alloys were fabricated by conventional powder metallurgy sintering method. Their microstructure, phase transformation temperature and mechanical properties were investigated by optical microscopy, scanning electron microscope, X-ray diffraction, differential scanning calorimetry and compression test. It was found that with more Zr addition, the content of ß phase increased while the content of precipitated α phase reduced. With 1 at% Zr increase, the Ms of Ti-13Nb-(0~6)Zr alloys decreased linearly by around 10°C. The compression test results revealed that sintered Ti-13Nb-2Zr owned a recoverable strain as high as 3.7% at room temperature, and Ti-13Nb-4Zr and Ti-13Nb-6Zr exhibited a remarkable recoverable strain of 4.4% at their Ms temperature which was lower than room temperature, indicating that these two alloys have a higher intrinsic recoverable strain and may be further optimized.
Assuntos
Ligas , Materiais Biocompatíveis/análise , Teste de Materiais , Titânio/análise , Zircônio/análise , Temperatura , Difração de Raios XRESUMO
This study aimed to evaluate and compare the effect of different surface post-processing treatments (polishing, heat treatment, glazing, polishing + heat treatment and polishing + glazing) on the superficial characteristics (micromorphology and roughness), phase transformation and fatigue strength of a Y-TZP ceramic ground with diamond bur. Discs of Y-TZP ceramic were manufactured (ISO:6872-2015; final dimensions of 15mm in diameter and 1.2 ± 0.2mm in thickness) and randomly allocated according to the surface condition: Ctrl - as-sintered; Gr - ground with coarse diamond bur; Gr+HT - ground and subjected to the heat treatment; Gr+Pol - ground and polished; Gr+Pol+HT - ground, polished and heat treated; Gr+Gl - ground and glazed; Gr+Pol+Gl - ground, polished and glazed. The following analyses were performed: roughness (n = 25), surface topography (n = 2), phase transformation (n = 2) and fatigue strength by staircase method (n = 20). All treatments influenced to some extent the surface characteristics of Y-TZP, being that polishing reduced the surface roughness, the m-phase content and improved the fatigue strength; glazing led to the lowest roughness values (Ra and Rz), although it showed the worst fatigue strength; heat treatment showed limited effect on surface roughness, led to complete reversion of the existing m-phase content to t-phase, without enhancing fatigue performance. Thus, a polishing protocol after clinic adjustment (grinding) of monolithic restorations based on polycrystalline zirconia material is mandatory for surface characteristics and fatigue performance improvements.
Assuntos
Polimento Dentário , Teste de Materiais , Ítrio/análise , Zircônio/análise , Porcelana Dentária , Diamante , Temperatura Alta , Propriedades de SuperfícieRESUMO
The Zr, Hf, Y and lanthanide (REE) distribution in biological tissues of Sabella spallanzanii and Styela plicata species collected from two harbours from the northern Sicily is studied for providing information regarding the Zr, Hf and REE uptake from the environment. Previous studies determined the fractionation of dissolved REE scavenged on binding sites onto biological surfaces. By comparing the recognised shale-normalised REE patterns of studied samples with evidence from reference data, the observed behaviour of these elements in biological tissues of Sabella spallanzanii and Styela plicata is interpreted to result from the preferential uptake of intermediate REE onto carboxylic sites. Moreover, the relationship observed between the Fe content and Zr/Hf ratio suggests that preferential Hf accumulation occurs via siderophore-like binding sites. Features of the REE bioaccumulation factors (BAF), in addition to the absolute La, Ce and Sm contents and Zr-Hf fractionation, allow definition of the different origins of studied elements in the investigated localities. Higher BAF values for La and Ce associated with larger REE contents and lower Zr/Hf values strongly suggest that the environmental REE distribution in the Termini Imerese harbour is influenced by the delivery of particles from industrial sources and power plants. On the contrary, the REE contents of biological tissues collected in the Cala tourist harbour are affected by the dust dissolution from automotive traffic. These results suggest that the geochemical behaviour of REE and Zr/Hf signature can be used in environmental studies of biological tissues for reconstructing the nature of anthropogenic contaminations.