Detection of combustion formed nanoparticles.

UV-visible extinction and scattering and two extra situ sampling techniques: atomic force microscopy (AFM) and differential mobility analysis (DMA) are used to follow the evolution of the particles formed in flames. These particle sizing techniques were chosen because of their sensitivity to detect inception particles, which have diameters, d<5 nm, too small to be observed with typical particle measurement instrumentation. The size of the particles determined by AFM and DMA compares well with the size determined by in situ optical measurements, indicating that the interpretation of the UV-visible optical signal is quite good, and strongly showing the presence of d=2-4 nm particles. UV-visible extinction measurements are also used to determine the concentration of d=2-4 nm particles at the exhausts of practical combustion systems. A numerical model, able to reproduce the experimentally observed low coagulation rate of nanoparticles with respect to soot particles, is used to investigate the operating conditions in the combustion chamber and exhaust system for which 2-4 nm particles survive the exhaust or grow to larger sizes. Combustion generated nanoparticles are suspected to affect human and environmental health because of their affinity for water, small size, low rate of coagulation, and large surface area/weight ratio. The ability to isolate nanoparticles from soot particles in hydrosols collected from combustion may be useful for future analysis by a variety of techniques and toxicological assays.