Separation and preconcentration of trace amounts of aluminum ions in surface water samples using different analytical techniques.
Talanta
; 80(1): 158-62, 2009 Nov 15.
Article
em En
| MEDLINE
| ID: mdl-19782206
ABSTRACT
A separation/preconcentration of aluminum (III) (Al(3+)) has been developed to overcome the problem of high matrix species, which may interfere with the determination of trace quantity of Al(3+) in natural water samples. The separation of Al(3+) in water samples was carried out from interfering cations by complexing them with 2-methyle 8-hyroxyquinoline (quinaldine) on activated silica. Whereas the separated trace amounts of Al(3+) was preconcentrated by cloud point extraction (CPE), as prior step to its determination by spectrofluorimetry (SPF) and flame atomic absorption spectrometry (FAAS). The Al(3+) react with 8-hydroxyquinoline (oxine) and then entrapped in non-ionic surfactant Triton X-114. The main factors affecting CPE efficiency, such as pH of sample solution, concentration of oxine and Triton X-114, equilibration temperature and time period for shaking were investigated in detail. The validity of separation/preconcentration of Al(3+) was checked by certified reference material of water (SRM-1643e). After optimization of the complexation and extraction conditions, a preconcentration factor of 20 was obtained for Al(3+) in 10 mL of natural water samples. The relative standard deviation for 6 replicates containing 100 microg L(-1) of Al(3+) was 5.41 and 4.53% for SPF and FAAS, respectively. The proposed method has been applied for determination of trace amount of Al(3+) in natural water samples with satisfactory results.
Texto completo:
1
Base de dados:
MEDLINE
Assunto principal:
Espectrometria de Fluorescência
/
Espectrofotometria Atômica
/
Alumínio
/
Água Doce
Idioma:
En
Ano de publicação:
2009
Tipo de documento:
Article