Lessons learned from a HDR brachytherapy well ionisation chamber calibration error.

ABSTRACT

The outcomes of a recent brachytherapy well-type ionization chamber calibration error are given in the hope that other brachytherapy treatment centres may better understand the importance of each entry stated in a well chamber calibration certificate. A Nucletron Source Dosimetry System (SDS) PTW well-type ionization chamber was sent for a biennial calibration in September 2010. Upon calibration of the chamber, it was discovered that the previous calibration (in July 2008) contained a +2.6% error in the chamber calibration coefficient. Investigation of the information on the 2008 well chamber calibration certificate indicated the source of the error, which could or should have been detected by both the calibration laboratory and/or the radiation therapy department upon return of the chamber. Consideration must be given to all values and conditions given on the calibration certificate when accepting a ionization chamber back from a calibration laboratory. The issue of whether the source strength from the source calibration certificate or the measured source strength from the calibrated ionization chamber should be entered into the treatment unit is also raised.