Fatigue and wear behaviour of zirconia materials.
J Mech Behav Biomed Mater
; 110: 103970, 2020 10.
Article
em En
| MEDLINE
| ID: mdl-32957257
ABSTRACT
OBJECTIVES:
Comparison of in-vitro fatigue and wear performance of 3Y-, 4Y-, 5Y-TZP and lithiumdisilicate ceramic, multilayer/monolayer 4Y-TZP and variation of wall thickness at 5Y-TZP. METHOD AND MATERIALS Crowns (n = 96; 6 groups à 16) were made of 3Y-TZP-LA, 4Y-TZP (multilayer and monolayer), 5Y-TZP (0,5mm/1 mm wall thickness) and lithiumdisilicate. 8 per group were stored in water (24hrs), 8 underwent TCML (1.200.000 × 50N; 2x3000x5°/55 °C; H2O, 2min cycle). Fracture force was determined by static loading (v = 1 mm/min, steel sphere with tin foil, diameter = 12 mm). Pin-on-block wear test was performed (steatite antagonist d = 3 mm; 50N, 120,000 cycles, 1.2Hz, lateral motion 1 mm, antagonist lift 1 mm, n = 8). Roughness, wear depth [µm] and antagonist wear were determined (3-D-laser-microscope, KJ3D, Keyence, J). STATISTICS one-way-ANOVA; Bonferroni-post-hoc-test; α = 0.05.RESULTS:
Fracture forces varied between 1211N (5Y,TCML) and 3952N (4Y-Mult,TCML). Individual significant differences (p ≤ 0.025) were found between materials. Increase of wall thickness (5Y; 0.5 mm/1.0 mm) lead to a non-significant (p ≥ 0.442) increase of fracture force. 4Y and 4Y-multilayer zirconia showed no significantly different (p ≥ 0.073) fracture forces. Zirconia mean wear (3Y10.0 ± 3.9 µm, 4Y19.8 ± 3.8 µm, 5Y10.9 ± 6.8 µm) was not significantly (p = 1.000) different. Lithiumdisilicate ceramic (149.3 ± 45.4 µm) and human enamel (434.2 ± 131.3 µm) provided significantly (p ≤ 0.002) higher wear. Antagonistic wear against lithiumdisilicate (17.5 ± 3.9%) and human enamel (6.7 ± 3.0%) was significantly (p ≤ 0.007) lower than against zirconia (4Y31.9 ± 8.0% - 5Y27.6 ± 5.8%).CONCLUSION:
Fracture force of 5Y-TZP differs from 4- or 3-Y-TZP. Mechanical characteristics and dimensional requirement of 5Y-TZP are comparable to lithiumdisilicate. Mono- or multilayer 4Y-TZP provided comparable fracture forces. Wear was comparable between zirconia systems and lower in comparison to lithiumdisilicate or enamel.Palavras-chave
Texto completo:
1
Base de dados:
MEDLINE
Assunto principal:
Zircônio
/
Coroas
Idioma:
En
Ano de publicação:
2020
Tipo de documento:
Article